[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Revisted Eth1 problem

Ed Greshko wrote:
david walcroft wrote:

I changed the Eth1 address to
                      Subnet default to

Most likely it should be

                     default Gateway to

Probably should not be set at all for that interface.  Post the output of
"netstat -rn".

Would this be correct
I'm using a crossover cable.

If you are using a crossover cable on eth1 then you don't need DHCP.  Better
to go with static network settings.

I see that there's a DHCP upgrade in Updates,I hope this can help with
this problem.

Just forget about using DHCP on eth1.  Life will be easier.

I have changed my ethernet card on Eth1.
My Iptables have not been changed for a long time,how would I test it
for any problems.

My netstat -rn
[david reddwarf ~]$ netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface U 0 0 0 eth0 U 0 0 0 eth1 UG 0 0 0 eth0 [david reddwarf ~]$

Thanks  david

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]