FC9 NetworkManager & WPA
max
maximilianbianco at gmail.com
Sat Aug 23 19:30:58 UTC 2008
Devon Harding wrote:
> On Sat, Aug 23, 2008 at 1:13 PM, max <maximilianbianco at gmail.com> wrote:
>
>> Devon Harding wrote:
>>
>>> On Sat, Aug 23, 2008 at 12:58 PM, max <maximilianbianco at gmail.com> wrote:
>>>
>>> Devon Harding wrote:
>>>> 2008/8/23 Anne Wilson <cannewilson at googlemail.com>
>>>>> On Saturday 23 August 2008 16:26:06 Devon Harding wrote:
>>>>>
>>>>>> On Fri, Aug 22, 2008 at 11:44 PM, Brian Powell <bpowell01 at gmail.com>
>>>>>>> wrote:
>>>>>> Devon,
>>>>>>>> Make sure you have the wpa_supplicant package installed.
>>>>>>>>
>>>>>>>> The wpa_supplicant package is installed (and the update). When I
>>>>>>>>
>>>>>>> select
>>>>>>>
>>>>>>> my
>>>>>> wireless from the drop down list, it still asks for a WEP key instead
>>>>>>> of
>>>>>>>
>>>>>>> a
>>>>>> WPA key.
>>>>>>> Do I need the wpa_supplicant_gui package too?
>>>>>>>
>>>>>>> I see the same behaviour on my EeePC. It does no harm, but it's
>>>>>>>
>>>>>> b******
>>>>>> annoying. (I presume that, like me, you can use the drop-down arrow to
>>>>>> select WPA then manually give it the passphrase?)
>>>>>>
>>>>>> Anne
>>>>>>
>>>>>>
>>>>>> The thing is, WPA is not one of the choices. I only have the
>>>>>> following:
>>>>>>
>>>>> WEP 128-bit Passphrase
>>>>> WEP 40/128-bit Hexadecimal
>>>>> WEP 40/128-bit ASCII
>>>>> LEAP
>>>>> Dynamic WEP (802.1x)
>>>>>
>>>>>
>>>>> Have you tried an older kernel? I have seen some weird stuff with
>>>>>
>>>> wireless on the latest but it may be something else going on there.
>>>>
>>>> What kind of wireless device are you working with?
>>>>
>>>> --
>>>> Fortune favors the BOLD
>>>>
>>>> --
>>>>
>>>
>>> I tried Ubuntu (Hardy) and got the same thing. If I choose 'Connect to
>>> other wireless network' I do see the option for WPA, but it doesn't seems
>>> to connect to my access point.
>>>
>>> -Devon
>>>
>>>
>>> But what wireless card are you using? I suspect your problem may be
>> there, its a possibility to explore anyway.
>>
>> from a terminal as root:
>>
>> root at localhost# lspci -v
>>
>> it will produce a lot of output , look for the wireless device it should be
>> obviously labeled
>>
>>
>>
> Here's the output:
>
> 00:12.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset
> (rev 01)
> Subsystem: Fujitsu Limited. Unknown device 1169
> Flags: medium devsel, IRQ 9
> Memory at e8013000 (32-bit, prefetchable) [size=4K]
> Capabilities: [dc] Power Management version 2
> Kernel driver in use: hostap_pci
> Kernel modules: orinoco_pci, hostap_pci
>
>
Some googling around shows you are not the only one with an issue with
this particular chipset.
It says its using the hostap_pci driver but lists orinco_pci and
hostap_pci as modules. I am thinking that perhaps both are getting
loaded and its unclear to me if you actually need both it could be that
hostap_pci depends on the orinco_pci. Lets see if we can find out.
Try this as root:
lsmod | grep orinco_pci
lsmod | grep hostap_pci
A generic example of what I mean:
[root at localhost ~]# lsmod | grep sata_nv
sata_nv 31624 3
libata 149664 4 pata_amd,sata_nv,pata_acpi,ata_generic
libata is used by sata_nv and others so if I tried to unload libata I
would run into a dependency issue
See what the commands return and post here. You may also want to check
dmesg for output related to your wireless device. Something like this
from a terminal as root:
dmesg
Will dump more than you need or you can refine your search with grep
dmesg | grep <your search term>
dmesg | grep -i <your search term> * the -i option makes it case
insensitive see man page for more detail or the info page
dmesg | grep 00:12.0 *may provide us with meaningful output
--
Fortune favors the BOLD
More information about the fedora-list
mailing list