Advice to an audiophobe ??
William Case
billlinux at rogers.com
Thu Dec 25 15:52:25 UTC 2008
David, Thank you;
If you cut and pasted these answers, I would love to know where (or what
site) you got them. If you took the time to write them off the top of
your head, I doubly thank you. You have given me enough information to
do some proper research of my own particular questions and do a small
write up for my own use.
Ps. I am top posting because there is no other place to appropriately
express my thanks.
On Fri, 2008-12-26 at 01:04 +1100, David Timms wrote:
> William Case wrote:
> > On Wed, 2008-12-24 at 08:30 +1030, Tim wrote:
> >> On Tue, 2008-12-23 at 10:55 -0500, William Case wrote:
> ...
> > 1. Gives me a whole range of adjustments for different channels. (I
> > assume channels means different sources e.g. Master, Headphone, PCM etc.).
> Just to clarify, a source device generates an audio signal( line in, PCM
> (pulse code modulation = wav uncompressed audio), that might then get
> processed (eg volume control, master, headphone), and then sent to a
> destination (often an output device like a speaker connector or
> headphone jack).
>
> Because a typical soundcard has an internal hardware mixer, it can
> usually mix together various inputs (sources) like CD input, mic input
> and recorded audio signals, and produce a single output signal (mostly
> in stereo=2 channels). When mixing together externally received signals,
> no main CPU processing power is used, unless you are trying to record to
> hard disk etc.
>
> > 2. gives me two choices and
> > 3., 4., 5. gives me only Master.
> > Which should I choose and why?
> capture means recording - usually from a line in (eg from a vcr or mp3
> player etc), or from a microphone. So exclude those from your choice.
>
> > If I should be using HDA NVida (Alsa-mixer), why do I have PulseAudio
> > options?
> Consider pulse audio to be a real-time digital mixer and volume control,
> where the audio calculations are performed inside your main CPU. In the
> default setup, once pulseaudio has done it's processing, it passes the
> result to the alsa driver which outputs the audio data to the soundcard.
> The soundcard turns the digital audio data into analog audio signals for
> use with amplifier, speakers, or headphones.
>
> Pulseaudio also has enhanced capabilities like remembering that when you
> playback with xmms that you like to output via your amplifiers and
> speakers, but when you are viewing a flash video, to playback into your
> headphones instead, at a different level. Another capability let's you
> choose the destination playback device while the material is actually
> being played. A third capability let's the output go to an audio device
> on another machine. Obviously, this is a bit trickier to set up.
>
> ...
> >> These individual mixer input controls should normally be left off if you
> >> never use them, as they can each introduce noise (hiss, beeps and
> >> burbles, etc.) to the system.
> > I will turn them off except for Master and Front. I will experiment
> > with PC Speaker. Of course these are only available to me if I use the
> > default alsa mixer setting.
> It's not a one or other setting, both parts will still be involved;
> pulseaudio will process, mix, and attenuate sound signals, whereas alsa
> will drive the physical hardware. The setting you are seeing lets you
> decide whether to control the physical driver volume levels or the
> software generated pulseaudio volume controls. If you mute or turn the
> alsa master way down, it wont matter how high you turn the pulseaudio
> mixer, since the alsamixer comes after the pulseaudio one in the audio
> chain. (also true for the reverse).
>
> If you play back a loud audio file, and turn both the pulseaudio source
> and master up full. Then change to the alsa setting. You can then use
> the also setting to set up an absolute maximum level that you would want
> to hear, by adjusting the master. Then you could go back to the
> pulseaudio setting to adjust the playback to a comfortable setting, and
> from then on only use the pulseaudio setting.
>
> ...
> >>> * How is sound related to video ?
> >
> >> Sound is the sound, video is the picture... The question is too vague
> >> to be answerable.
> In digital format, sound and vision are both represented with digital
> 1's and 0's. With all video and audio file types, there is a packing
> together of the audio and video information into the one file. The
> multiplexed file provides information about when to playback each frame
> of video in relation to the audio in the file. For example, an mpeg2
> (dvd) file might have two frames of video, then 2 of audio, then 1 of
> video, two audio in an order to achieve a consistent throughput of audio
> and video data.
>
> >>> * Why are there so many files associated with producing sound?
> In digital audio, the most basic file type is waveform (.wav), where
> each momentary value of audio is stored, on a 1 for 1 basis. Experiments
> and calculations can show us that for something we store as quality
> musical recording we need to sample that momentary value at 44kHz (times
> per second) or higher so as not to disrupt our digital recording with
> audio aliases. Since we also seem to enjoy the spatial enhancement
> produced by stereo or more channels, the file needs to store both left
> and right information. Finally, we found that if we only store the
> digital value using a small no of bits per sample, when played back we
> hear a harsh, chunky sound, rather than the CD like quality of using 16
> (or more) bits per sample. The catch with all that is it takes up a lot
> space.
>
> To solve space issues (less a problem now that storage space costs a lot
> less), compression schemes were developed. Most take advantage of
> reducing the number of channels eg to mono, reducing the sampling rate,
> or the number quantizing levels (bits/sample); but this is done in
> context of the type of audio being compressed - eg human voices are
> typically of lower frequency, and can sampled at a slower rate, and with
> less levels.
>
> The biggest jump in compression was with psychoacoustic modelling, where
> it was found that in a complex sound, a listener does not notice that
> certain frequency (pitch) sounds become inaudible (or masked) by other
> sounds.
>
> The reason there is so many formats, is because developers were
> essentially competing to produce more highly compressed audio files,
> without noticeable change in quality, when using a certain type of
> audio, over a certain communication medium. Eg: when the fastest home
> internet connections were slow modems, compression made it possible to
> transmit voice signals over your internet connection. If you tried to
> transmit music of higher quality that voice, you would have large audio
> distortions that made it difficult to hear the original material.
>
> You might like to play with the audio editor program audacity (perhaps
> from rpmfusion if you want to be able to import and save in certain
> compressed formats (mp3)). It shows you a graphical representation of
> the audio file, and eg lets you choose a zoom, start and stop position,
> and just play back small parts of a file, so that you can work out what
> the sound "looks" like to a computer.
>
> Hope that helps a bit more ;-)
> DaveT.
>
--
Regards Bill
Fedora 10, Gnome 2.24.2
Evo.2.24.2, Emacs 22.2.1
More information about the fedora-list
mailing list