F9 - X crashing
Robert Moskowitz
rgm at htt-consult.com
Thu Dec 18 01:48:45 UTC 2008
Continuing saga of my decTOP and F9.
F9 is not recognizing my video card. The decTOP has an AMD geode X2
video processor. Centos works fine with the 'nsc' driver (name of
driver for geode video in Centos).
Oh, even though F9 reports no video card (when I try a
'system-config-display --reconfig', and I get a slew of dbus errors
before the report of no video), if I just tyr 'startx' with no
xorg.conf, X (and gnome) start at 800x600 resolution.
So I look at how X is set up on the Compaq SFF (that has th 'ati' video
driver). I copy over the xorg.conf file, replacing 'ati' with 'geode'
(what appears to be the driver name in F9). I create the X symbolic
link in the /etc/X11 directory, and do a 'startx'. It failed. below is
the content of Xorg.0.log from right after the crash:
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-92.1.10.el5 i686
Current Operating System: Linux dectop2.client.htt-consult.com
2.6.27.7-53.fc9.i586 #1 SMP Thu Nov 27 01:53:33 EST 2008 i586
Build Date: 03 November 2008 12:34:56AM
Build ID: xorg-x11-server 1.5.2-3.fc9
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 17 20:17:32 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81ef400
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0 at 0:1:1) National Semiconductor Corporation Geode GX2
Graphics Processor rev 0, Mem @ 0xe0000000/0, 0xe1000000/0,
0xe1004000/0, 0xe1008000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SELinux
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "geode"
(II) Loading /usr/lib/xorg/modules/drivers//geode_drv.so
(II) Module geode: vendor="X.Org Foundation"
compiled for 1.4.99.905, module version = 2.10.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.99.901, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.99.901, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
(II) Primary Device is: PCI 00 at 00:01:1
AmdPciProbe: Probing for supported devices!
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) GEODE(0): AmdPciProbe: CPUDetected 16!
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
Unable to open /dev/cpu/0/msr: 2
Unable to read the MSR - reverting to the VSA method.
(**) GEODE(0): Depth 24, (--) framebuffer bpp 32
(==) GEODE(0): RGB weight 888
(==) GEODE(0): Default visual is TrueColor
(==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
(II) GEODE(0): Using EXA acceleration architecture
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) GEODE(0): Primary V_BIOS segment is: 0xc000
(II) GEODE(0): I2C bus "CS5536 DDC BUS" initialized.
(II) GEODE(0): I2C device "CS5536 DDC BUS:ddc2" registered at address 0xA0.
(II) GEODE(0): I2C device "CS5536 DDC BUS:ddc2" removed.
(II) GEODE(0): I2C bus "CS5536 DDC BUS" removed.
(II) GEODE(0): Monitor0: Using hsync range of 31.50-50.00 kHz
(II) GEODE(0): Monitor0: Using vrefresh range of 56.00-65.00 Hz
(WW) GEODE(0): Unable to estimate virtual size
(II) GEODE(0): Clock range: 25.18 to 229.50 MHz
(II) GEODE(0): Not using default mode "640x350" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x400" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "720x400" (vrefresh out of range)
(II) GEODE(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (vrefresh out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (vrefresh out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (interlace mode not
supported)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x960" (hsync out of range)
(II) GEODE(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x960" (hsync out of range)
(II) GEODE(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1792x1344" (hsync out of range)
(II) GEODE(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1856x1392" (hsync out of range)
(II) GEODE(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "832x624" (vrefresh out of range)
(II) GEODE(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(--) GEODE(0): Virtual size is 1024x768 (pitch 1024)
(**) GEODE(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(**) GEODE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(**) GEODE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600
601 603 625 +hsync +vsync (35.2 kHz)
(**) GEODE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490
492 525 -hsync -vsync (31.5 kHz)
(==) GEODE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) GEODE(0): Found Geode 1000000 0xb6ed0000
(II) EXA(0): Offscreen pixmap area of 9631744 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) GEODE(0): Backing store disabled
(**) Option "dpms"
(**) GEODE(0): DPMS enabled
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
Fatal server error:
Caught signal 11. Server aborting
(II) UnloadModule: "kbd"
(II) UnloadModule: "mouse"
So what to do????
More information about the fedora-list
mailing list