Strange behavior - cannot burn cd's and no sound
max
maximilianbianco at gmail.com
Sun Feb 24 00:19:59 UTC 2008
max wrote:
> Alan wrote:
>>> Has anyone noticed an inability to burn cd's when running F8? I recently
>>> noticed this on my home machine and thought it was hardware related
>>> until
>>> i
>>> tried another cd burner and got the same result. The error stating that
>>> there was an error while recording. However the home machine still reads
>>> the
>>> cd's but just will not complete the burn process without throwing an
>>> error.
>>> It isn't much to go on and i thought it rather minor until I rolled into
>>> work and found my f8 station not even giving me an error but not
>>> recognizing
>>> the blank cd in the drive ( i tried several blanks). It worked yesterday
>>> when i burned an F9 Alpha which subsequently spun right up and installed
>>> on
>>> an old dell. Today after the most recent update it fails to recognize
>>> any
>>> cd's blank or not. Is this some general issue felt all around or did
>>> somebody give me the evil eye?
>>
>> I have been using F8 for a while and have no problems burning DVDs, CDs,
>> or with sound.
>>
>> Could you post a copy of /sbin/lspci and give us a better idea of what
>> you
>> have for a chipset?
>>
> My F8 box at work is now functioning again. Something had stopped hal
> daemon, presumably the update but i can't be sure. My box at home
> however is suffering from something else. The sound first failed about
> ten days ago but I have not had a lot of time to feel the lack or do
> anything about it.
> As a result I am just now trying to get to the bottom of it. I am not
> sure if my two problems are related because I can't exactly remember the
> last time I burned a disc at home. I just know when i tried a couple of
> days ago it failed with the following error :
>
> Error writing to disc
> There was an error writing to the disc.
> The recorder could not be accessed
>
> I right clicked selected Write to Disc , selected either writable
> drive and click on write and <insert error here>
> I use Gnome Desktop , in case we're not taking that for granted.
>
> The rest of this email is devoted to the requests for lspci and dmesg. I
> threw lsmod in to just cause. There is alot of output below so keep on
> scrolling.
>
> The output of lspci and lsmod ( in that order):
>
>> 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
>> 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
>> 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
>> 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
>> 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
>> 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
>> 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
>> 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
>> 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
>> 00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio
>> (rev a2)
>> 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
>> 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
>> 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
>> 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
>> 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
>> 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
>> 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
>> 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
>> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
>> [Athlon64/Opteron] HyperTransport Technology Configuration
>> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
>> [Athlon64/Opteron] Address Map
>> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
>> [Athlon64/Opteron] DRAM Controller
>> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
>> [Athlon64/Opteron] Miscellaneous Control
>> 01:00.0 Ethernet controller: Atheros Communications, Inc.
>> AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)
>> 01:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
>> Controller (rev 80)
>> 07:00.0 VGA compatible controller: ATI Technologies Inc R520 [Radeon
>> X1800]
>> 07:00.1 Display controller: ATI Technologies Inc R520 [Radeon X1800]
>> (Secondary)
>
>> Module Size Used by
>> ipt_MASQUERADE 11457 1 iptable_nat 14789 1
>> nf_nat 25837 2 ipt_MASQUERADE,iptable_nat
>> xt_tcpudp 11713 4 bridge 59753 0
>> w83627ehf 30281 0 hwmon_vid 10945 1 w83627ehf
>> nf_conntrack_ipv4 17353 4 iptable_nat
>> ipt_REJECT 12353 4 iptable_filter 11073 1
>> ip_tables 26281 2 iptable_nat,iptable_filter
>> nf_conntrack_ipv6 25713 1 xt_state 10689 3
>> nf_conntrack 65345 6
>> ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
>>
>> nfnetlink 13321 4
>> nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack
>> ip6t_ipv6header 10817 2 ip6t_REJECT 12993 2
>> ip6table_filter 10945 1 ip6_tables 21257 2
>> ip6t_ipv6header,ip6table_filter
>> x_tables 23113 9
>> ipt_MASQUERADE,iptable_nat,xt_tcpudp,ipt_REJECT,ip_tables,xt_state,ip6t_ipv6header,ip6t_REJECT,ip6_tables
>>
>> cpufreq_ondemand 15569 1 loop 23493 0
>> dm_multipath 24401 0 ipv6 307273 26
>> nf_conntrack_ipv6,ip6t_REJECT
>> kvm_amd 24149 0 kvm 70041 1 kvm_amd
>> snd_usb_audio 95169 0 snd_usb_lib 24001 1
>> snd_usb_audio
>> snd_rawmidi 28865 1 snd_usb_lib
>> sr_mod 23397 0 cdrom 40553 1 sr_mod
>> arc4 10433 2 ecb 11457 2
>> blkcipher 13893 1 ecb
>> snd_hda_intel 361577 1 snd_seq_dummy 11461 0
>> snd_seq_oss 37313 0 snd_seq_midi_event 15041 1
>> snd_seq_oss
>> snd_seq 56673 5
>> snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>> snd_seq_device 15061 4
>> snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
>> snd_pcm_oss 45889 0 snd_mixer_oss 22721 2
>> snd_pcm_oss
>> pata_amd 20293 0 usb_storage 87681 0
>> snd_pcm 80201 3 snd_usb_audio,snd_hda_intel,snd_pcm_oss
>> firewire_ohci 25281 0 ath5k 99781 0
>> mac80211 143185 1 ath5k
>> firewire_core 46465 1 firewire_ohci
>> i2c_nforce2 14017 0 i2c_core 28865 1
>> i2c_nforce2
>> snd_timer 27721 2 snd_seq,snd_pcm
>> k8temp 13377 0 usblp 20801 0
>> hwmon 11081 2 w83627ehf,k8temp
>> cfg80211 27089 1 mac80211
>> snd_page_alloc 16465 2 snd_hda_intel,snd_pcm
>> snd_hwdep 16073 2 snd_usb_audio,snd_hda_intel
>> crc_itu_t 10433 1 firewire_core
>> forcedeth 53321 0 parport_pc 35177 0
>> button 15969 0 snd 60137 11
>> snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
>>
>> parport 42317 1 parport_pc
>> pcspkr 11329 0 sg 40297 0
>> soundcore 15073 2 snd
>> joydev 18881 0 serio_raw 14277 0
>> floppy 65769 0 dm_snapshot 22921 0
>> dm_zero 10305 0 dm_mirror 27073 0
>> dm_mod 57649 9
>> dm_multipath,dm_snapshot,dm_zero,dm_mirror
>> ata_generic 14405 0 sata_nv 25157 2
>> libata 114545 3 pata_amd,ata_generic,sata_nv
>> sd_mod 33345 3 scsi_mod 145913 5
>> sr_mod,usb_storage,sg,libata,sd_mod
>> ext3 126929 2 jbd 64817 1 ext3
>> mbcache 15809 1 ext3
>> uhci_hcd 30561 0 ohci_hcd 27845 0
>> ehci_hcd 39117 0
>
>
>
>
>
> Dmesg was also asked for and here goes ( There is one line towards the
> end that says " cdrom:this disk doesn't have any tracks i recognize!"
> Also at the very end some I/O errors. The floppy i recognize fd0, sr1 is
> the dvd burner(i think) maybe it is a hardware problem but i tried
> another burner and got the same results. It's possible that both burners
> are cooked i suppose. I was going to pull them and shove them into my f9
> alpha box but that has its own issues now and i don't think this is the
> list for it.)
>
>> Linux version 2.6.23.15-137.fc8 (mockbuild at hammer2.fedora.redhat.com)
>> (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun Feb 10
>> 17:03:13 EST 2008
>> Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
>> BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
>> BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
>> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
>> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>> Entering add_active_range(0, 256, 786384) 1 entries of 3200 used
>> end_pfn_map = 1048576
>> DMI present.
>> ACPI: RSDP 000F9080, 0014 (r0 ACPIAM)
>> ACPI: RSDT BFFD0000, 003C (r1 A M I OEMRSDT 3000716 MSFT 97)
>> ACPI: FACP BFFD0200, 0084 (r2 A M I OEMFACP 3000716 MSFT 97)
>> ACPI: DSDT BFFD0440, 5035 (r1 1ADGH 1ADGH013 13 INTL 20051117)
>> ACPI: FACS BFFDE000, 0040
>> ACPI: APIC BFFD0390, 0070 (r1 A M I OEMAPIC 3000716 MSFT 97)
>> ACPI: MCFG BFFD0400, 003C (r1 A M I OEMMCFG 3000716 MSFT 97)
>> ACPI: OEMB BFFDE040, 0061 (r1 A M I AMI_OEM 3000716 MSFT 97)
>> ACPI: HPET BFFD5480, 0038 (r1 A M I OEMHPET0 3000716 MSFT 97)
>> ACPI: SSDT BFFD54C0, 0206 (r1 A M I POWERNOW 1 AMD 1)
>> Scanning NUMA topology in Northbridge 24
>> CPU has 2 num_cores
>> No NUMA configuration found
>> Faking a node at 0000000000000000-00000000bffd0000
>> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>> Entering add_active_range(0, 256, 786384) 1 entries of 3200 used
>> Bootmem setup node 0 0000000000000000-00000000bffd0000
>> Zone PFN ranges:
>> DMA 0 -> 4096
>> DMA32 4096 -> 1048576
>> Normal 1048576 -> 1048576
>> Movable zone start PFN for each node
>> early_node_map[2] active PFN ranges
>> 0: 0 -> 159
>> 0: 256 -> 786384
>> On node 0 totalpages: 786287
>> DMA zone: 56 pages used for memmap
>> DMA zone: 1320 pages reserved
>> DMA zone: 2623 pages, LIFO batch:0
>> DMA32 zone: 10695 pages used for memmap
>> DMA32 zone: 771593 pages, LIFO batch:31
>> Normal zone: 0 pages used for memmap
>> Movable zone: 0 pages used for memmap
>> ACPI: PM-Timer IO Port: 0x2008
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> Processor #0 (Bootup-CPU)
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>> Processor #1
>> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> ACPI: IRQ14 used by override.
>> ACPI: IRQ15 used by override.
>> Setting APIC routing to flat
>> ACPI: HPET id: 0x10de8201 base: 0xfed00000
>> Using ACPI (MADT) for SMP configuration information
>> swsusp: Registered nosave memory region: 000000000009f000 -
>> 00000000000a0000
>> swsusp: Registered nosave memory region: 00000000000a0000 -
>> 00000000000e0000
>> swsusp: Registered nosave memory region: 00000000000e0000 -
>> 0000000000100000
>> Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>> PERCPU: Allocating 41688 bytes of per cpu data
>> Built 1 zonelists in Node order. Total pages: 774216
>> Policy zone: DMA32
>> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> hpet clockevent registered
>> TSC calibrated against HPET
>> Marking TSC unstable due to TSCs unsynchronized
>> time.c: Detected 2199.999 MHz processor.
>> Console: colour VGA+ 80x25
>> console [tty0] enabled
>> Checking aperture...
>> CPU 0: aperture @ 4680000000 size 32 MB
>> Aperture too small (32 MB)
>> No AGP bridge found
>> Memory: 3092652k/3145536k available (2445k kernel code, 52496k
>> reserved, 1382k data, 324k init)
>> SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>> Calibrating delay using timer specific routine.. 4402.57 BogoMIPS
>> (lpj=2201287)
>> Security Framework v1.0.0 initialized
>> SELinux: Initializing.
>> SELinux: Starting in permissive mode
>> selinux_register_security: Registering secondary module capability
>> Capability LSM initialized as secondary
>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> CPU 0/0 -> Node 0
>> CPU: Physical Processor ID: 0
>> CPU: Processor Core ID: 0
>> SMP alternatives: switching to UP code
>> ACPI: Core revision 20070126
>> Using local APIC timer interrupts.
>> APIC timer calibration result 12499995
>> Detected 12.499 MHz APIC timer.
>> SMP alternatives: switching to SMP code
>> Booting processor 1/2 APIC 0x1
>> Initializing CPU#1
>> Calibrating delay using timer specific routine.. 4399.71 BogoMIPS
>> (lpj=2199857)
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> CPU 1/1 -> Node 0
>> CPU: Physical Processor ID: 0
>> CPU: Processor Core ID: 1
>> AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>> Brought up 2 CPUs
>> sizeof(vma)=176 bytes
>> sizeof(page)=56 bytes
>> sizeof(inode)=560 bytes
>> sizeof(dentry)=208 bytes
>> sizeof(ext3inode)=760 bytes
>> sizeof(buffer_head)=104 bytes
>> sizeof(skbuff)=232 bytes
>> sizeof(task_struct)=2080 bytes
>> Time: 22:46:22 Date: 02/19/08
>> NET: Registered protocol family 16
>> No dock devices found.
>> ACPI: bus type pci registered
>> PCI: Using configuration type 1
>> ACPI: EC: Look up EC in DSDT
>> ACPI: Interpreter enabled
>> ACPI: (supports S0 S1 S3 S4 S5)
>> ACPI: Using IOAPIC for interrupt routing
>> Error attaching device data
>> Error attaching device data
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Transparent bridge - 0000:00:06.0
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
>> ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>> ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
>> ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>> ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>> ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
>> ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5
>> ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
>> ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
>> ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
>> ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>> ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
>> ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
>> ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
>> ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>> ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
>> ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - EE,
>> should be DF [20070126]
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> ACPI: bus type pnp registered
>> pnp: PnP ACPI: found 18 devices
>> ACPI: ACPI bus type pnp unregistered
>> usbcore: registered new interface driver usbfs
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
>> a report
>> NetLabel: Initializing
>> NetLabel: domain hash size = 128
>> NetLabel: protocols = UNLABELED CIPSOv4
>> NetLabel: unlabeled traffic allowed by default
>> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>> hpet0: 3 32-bit timers, 25000000 Hz
>> Time: hpet clocksource has been installed.
>> Switched to high resolution mode on CPU 0
>> Switched to high resolution mode on CPU 1
>> pnp: 00:09: iomem range 0xfe980000-0xfe9bffff has been reserved
>> pnp: 00:09: iomem range 0xfee01000-0xfeefffff has been reserved
>> pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
>> pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>> pnp: 00:0e: ioport range 0xa00-0xa0f has been reserved
>> pnp: 00:0e: ioport range 0xa10-0xa1f has been reserved
>> pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
>> pnp: 00:10: iomem range 0xd0000000-0xdfffffff could not be reserved
>> pnp: 00:11: iomem range 0x0-0x9ffff could not be reserved
>> pnp: 00:11: iomem range 0xc0000-0xcffff has been reserved
>> pnp: 00:11: iomem range 0xe0000-0xfffff could not be reserved
>> pnp: 00:11: iomem range 0x100000-0xbfffffff could not be reserved
>> PCI: Bridge: 0000:00:06.0
>> IO window: d000-dfff
>> MEM window: fea00000-feafffff
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:0a.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:0b.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:0c.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:0d.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:0e.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:0f.0
>> IO window: e000-efff
>> MEM window: feb00000-febfffff
>> PREFETCH window: c0000000-cfffffff
>> PCI: Setting latency timer of device 0000:00:06.0 to 64
>> PCI: Setting latency timer of device 0000:00:0a.0 to 64
>> PCI: Setting latency timer of device 0000:00:0b.0 to 64
>> PCI: Setting latency timer of device 0000:00:0c.0 to 64
>> PCI: Setting latency timer of device 0000:00:0d.0 to 64
>> PCI: Setting latency timer of device 0000:00:0e.0 to 64
>> PCI: Setting latency timer of device 0000:00:0f.0 to 64
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 524288 bind 65536)
>> TCP reno registered
>> checking if image is initramfs... it is
>> Freeing initrd memory: 3887k freed
>> audit: initializing netlink socket (disabled)
>> audit(1203461181.502:1): initialized
>> Total HugeTLB memory allocated, 0
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> SELinux: Registering netfilter hooks
>> ksign: Installing public key data
>> Loading keyring
>> - Added public key 9836951F452B0ADB
>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> Boot video device is 0000:07:00.0
>> PCI: Setting latency timer of device 0000:00:0a.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:0a.0:pcie00]
>> PCI: Setting latency timer of device 0000:00:0b.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:0b.0:pcie00]
>> PCI: Setting latency timer of device 0000:00:0c.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:0c.0:pcie00]
>> PCI: Setting latency timer of device 0000:00:0d.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:0d.0:pcie00]
>> PCI: Setting latency timer of device 0000:00:0e.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:0e.0:pcie00]
>> PCI: Setting latency timer of device 0000:00:0f.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:0f.0:pcie00]
>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> Real Time Clock Driver v1.12ac
>> hpet_resources: 0xfed00000 is busy
>> Non-volatile memory driver v1.2
>> Linux agpgart interface v0.102
>> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>> input: Macintosh mouse button emulation as /class/input/input0
>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> mice: PS/2 mouse device common for all mice
>> cpuidle: using governor menu
>> usbcore: registered new interface driver hiddev
>> usbcore: registered new interface driver usbhid
>> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>> TCP cubic registered
>> Initializing XFRM netlink socket
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
>> processors (2 cpu cores) (version 2.00.00)
>> powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xa
>> powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xc
>> powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xe
>> powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
>> Magic number: 12:971:805
>> Freeing unused kernel memory: 324k freed
>> Write protecting the kernel read-only data: 1024k
>> ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
>> ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 23 (level,
>> low) -> IRQ 23
>> PCI: Setting latency timer of device 0000:00:02.1 to 64
>> ehci_hcd 0000:00:02.1: EHCI Host Controller
>> ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>> ehci_hcd 0000:00:02.1: debug port 1
>> PCI: cache line size of 64 is not supported by device 0000:00:02.1
>> ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe9fac00
>> ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>> usb usb1: configuration #1 chosen from 1 choice
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 10 ports detected
>> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>> ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level,
>> low) -> IRQ 22
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> ohci_hcd 0000:00:02.0: OHCI Host Controller
>> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>> ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe9fb000
>> usb usb2: configuration #1 chosen from 1 choice
>> hub 2-0:1.0: USB hub found
>> hub 2-0:1.0: 10 ports detected
>> USB Universal Host Controller Interface driver v3.0
>> SCSI subsystem initialized
>> libata version 2.21 loaded.
>> sata_nv 0000:00:05.0: version 3.5
>> ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>> ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level,
>> low) -> IRQ 21
>> PCI: Setting latency timer of device 0000:00:05.0 to 64
>> scsi0 : sata_nv
>> scsi1 : sata_nv
>> ata1: SATA max UDMA/133 cmd 0x000000000001c480 ctl 0x000000000001c402
>> bmdma 0x000000000001bc00 irq 21
>> ata2: SATA max UDMA/133 cmd 0x000000000001c080 ctl 0x000000000001c002
>> bmdma 0x000000000001bc08 irq 21
>> usb 1-4: new high speed USB device using ehci_hcd and address 4
>> usb 1-4: configuration #1 chosen from 1 choice
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133
>> ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1)
>> ata1.00: configured for UDMA/133
>> usb 2-1: new low speed USB device using ohci_hcd and address 2
>> usb 2-1: configuration #1 chosen from 1 choice
>> input: HID 1241:1166 as /class/input/input1
>> input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:02.0-1
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata2.00: ATA-7: WDC WD1600JS-00SGB0, 20.06C03, max UDMA/133
>> ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> ata2.00: configured for UDMA/133
>> scsi 0:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0
>> ANSI: 5
>> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>> sd 0:0:0:0: [sda] Write Protect is off
>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>> sd 0:0:0:0: [sda] Write Protect is off
>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>> sda: sda1 sda2 sda3 sda4
>> sd 0:0:0:0: [sda] Attached SCSI disk
>> scsi 1:0:0:0: Direct-Access ATA WDC WD1600JS-00S 20.0 PQ: 0
>> ANSI: 5
>> sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>> sd 1:0:0:0: [sdb] Write Protect is off
>> sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>> sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>> sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>> sd 1:0:0:0: [sdb] Write Protect is off
>> sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>> sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>> sdb: sdb1 sdb2
>> sd 1:0:0:0: [sdb] Attached SCSI disk
>> ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>> ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 20 (level,
>> low) -> IRQ 20
>> PCI: Setting latency timer of device 0000:00:05.1 to 64
>> scsi2 : sata_nv
>> scsi3 : sata_nv
>> ata3: SATA max UDMA/133 cmd 0x000000000001b880 ctl 0x000000000001b802
>> bmdma 0x000000000001b080 irq 20
>> ata4: SATA max UDMA/133 cmd 0x000000000001b480 ctl 0x000000000001b402
>> bmdma 0x000000000001b088 irq 20
>> usb 2-2: new low speed USB device using ohci_hcd and address 3
>> ata3: SATA link down (SStatus 0 SControl 300)
>> usb 2-2: configuration #1 chosen from 1 choice
>> input: HID 1267:0103 as /class/input/input2
>> input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:02.0-2
>> input: HID 1267:0103 as /class/input/input3
>> input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:02.0-2
>> ata4: SATA link down (SStatus 0 SControl 300)
>> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
>> dm-devel at redhat.com
>> kjournald starting. Commit interval 5 seconds
>> EXT3-fs: mounted filesystem with ordered data mode.
>> audit(1203461187.351:2): enforcing=1 old_enforcing=0 auid=4294967295
>> security: 8 users, 12 roles, 2347 types, 114 bools, 1 sens, 1024 cats
>> security: 67 classes, 215517 rules
>> SELinux: Completing initialization.
>> SELinux: Setting up existing superblocks.
>> SELinux: initialized (dev dm-0, type ext3), uses xattr
>> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>> SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>> SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
>> genfs_contexts
>> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>> SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>> SELinux: initialized (dev proc, type proc), uses genfs_contexts
>> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>> audit(1203461187.798:3): policy loaded auid=4294967295
>> Floppy drive(s): fd0 is 1.44M
>> FDC 0 is a post-1991 82077
>> sd 0:0:0:0: Attached scsi generic sg0 type 0
>> sd 1:0:0:0: Attached scsi generic sg1 type 0
>> input: PC Speaker as /class/input/input4
>> input: Power Button (FF) as /class/input/input5
>> ACPI: Power Button (FF) [PWRF]
>> input: Power Button (CM) as /class/input/input6
>> ACPI: Power Button (CM) [PWRB]
>> parport_pc 00:08: reported by Plug and Play ACPI
>> parport0: PC-style at 0x378, irq 7 [PCSPP]
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>> ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
>> ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 23 (level,
>> low) -> IRQ 23
>> PCI: Setting latency timer of device 0000:00:08.0 to 64
>> forcedeth: using HIGHDMA
>> usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0
>> pid 0x5C11
>> usbcore: registered new interface driver usblp
>> Initializing USB Mass Storage driver...
>> scsi4 : SCSI emulation for USB Mass Storage devices
>> usb-storage: device found at 4
>> usb-storage: waiting for device to settle before scanning
>> usbcore: registered new interface driver usb-storage
>> USB Mass Storage support registered.
>> eth0: forcedeth.c: subsystem: 01462:7250 bound to 0000:00:08.0
>> i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
>> i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
>> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
>> ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKD] -> GSI 19 (level,
>> low) -> IRQ 19
>> pata_amd 0000:00:04.0: version 0.3.9
>> PCI: Setting latency timer of device 0000:00:04.0 to 64
>> scsi5 : pata_amd
>> scsi6 : pata_amd
>> ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6
>> bmdma 0x000000000001ffa0 irq 14
>> ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376
>> bmdma 0x000000000001ffa8 irq 15
>> firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI version 1.10
>> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
>> ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 18 (level,
>> low) -> IRQ 18
>> ath5k_pci 0000:01:00.0: registered as 'phy0'
>> phy0: Selected rate control algorithm 'pid'
>> ath5k phy0: Atheros AR5213A chip found (MAC: 0x79, PHY: 0x45)
>> ath5k phy0: RF2112A 2GHz radio found (0x56)
>> firewire_core: created device fw0: GUID 0010dc0000d061f9, S400
>> ata5.00: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0B, max UDMA/66
>> ata5.01: ATAPI: SONY CD-RW CRX210E1, 2YS1, max UDMA/33
>> ata5.00: limited to UDMA/33 due to 40-wire cable
>> ata5.00: configured for UDMA/33
>> ata5.01: configured for UDMA/33
>> ata6: port disabled. ignoring.
>> scsi 5:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0B PQ: 0
>> ANSI: 5
>> scsi 5:0:0:0: Attached scsi generic sg2 type 5
>> scsi 5:0:1:0: CD-ROM SONY CD-RW CRX210E1 2YS1 PQ: 0
>> ANSI: 5
>> scsi 5:0:1:0: Attached scsi generic sg3 type 5
>> ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 22
>> ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 22 (level,
>> low) -> IRQ 22
>> PCI: Setting latency timer of device 0000:00:09.0 to 64
>> forcedeth: using HIGHDMA
>> sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>> Uniform CD-ROM driver Revision: 3.20
>> sr 5:0:0:0: Attached scsi CD-ROM sr0
>> sr1: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray
>> sr 5:0:1:0: Attached scsi CD-ROM sr1
>> eth1: forcedeth.c: subsystem: 01462:7250 bound to 0000:00:09.0
>> ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
>> ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 21 (level,
>> low) -> IRQ 21
>> PCI: Setting latency timer of device 0000:00:06.1 to 64
>> usbcore: registered new interface driver snd-usb-audio
>> SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>> NET: Registered protocol family 10
>> lo: Disabled Privacy Extensions
>> ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 17
>> ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNEB] -> GSI 17 (level,
>> low) -> IRQ 17
>> usb-storage: device scan complete
>> scsi 4:0:0:0: Direct-Access HP Photosmart C4280 1.00 PQ: 0
>> ANSI: 5
>> sd 4:0:0:0: [sdc] Attached SCSI removable disk
>> sd 4:0:0:0: Attached scsi generic sg4 type 0
>> device-mapper: multipath: version 1.0.5 loaded
>> loop: module loaded
>> EXT3 FS on dm-0, internal journal
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on sdb1, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> SELinux: initialized (dev sdb1, type ext3), uses xattr
>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>> Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1
>> extents:1 across:2031608k
>> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
>> genfs_contexts
>> ip6_tables: (C) 2000-2006 Netfilter Core Team
>> Netfilter messages via NETLINK v0.30.
>> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> ip_tables: (C) 2000-2006 Netfilter Core Team
>> Clocksource tsc unstable (delta = -215403485 ns)
>> w83627ehf: Found W83627EHG chip at 0xa10
>> audit(1203461207.480:4): audit_pid=2013 old=0 by auid=4294967295
>> subj=system_u:system_r:auditd_t:s0
>> Bridge firewalling registered
>> vnet0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>> vnet0: starting userspace STP failed, starting kernel STP
>> cdrom: This disc doesn't have any tracks I recognize!
>> eth0: no link during initialization.
>> ADDRCONF(NETDEV_UP): eth0: link is not ready
>> ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> vnet0: no IPv6 routers present
>> eth0: link up.
>> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> eth0: no IPv6 routers present
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev sr1, sector 0
>> Buffer I/O error on device sr1, logical block 0
>> end_request: I/O error, dev sr1, sector 0
>> Buffer I/O error on device sr1, logical block 0
>> ath5k phy0: noise floor calibration timeout (2452MHz)
>
> Any help much appreciated.
>
> Thanks,
>
> Max
Just to let everyone know I resolved my problems by restarting the
console kit service. Thanks for the help.
Max
More information about the fedora-list
mailing list