[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [F8] Seems I lost my network connection...



On Tue, 2008-01-22 at 15:40 -0800, Daniel B. Thurman wrote:
> I must have installed something that now prevented my
> network connection to work.  I do not know where to begin
> to resolve this issue.
> 
> I had a hard time initially to compile/build the module for
> my onboard network but I did have it running and it was
> really great.
> 
> But somehow, I have lost it.
> 
> Can someone give me advice how to go about troubleshooting it?
> 
> What I do know is that the network daemon is running, it correctly
> loaded the nic module, ipconfig shows both eth0 and lo:
> 
> ifconfig:
> ==================================================================
> eth0  Link encap: Thernet  Hwaddr: 00:1B:FC:EC:4B:27
>         inet addr: 10.1.0.8 Bcast:10.1.0.255 Maask: 255.255.255.0
>         UP BROADCAST MULTICAST  MTU: 1500 Metric: 1
>         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>         collisions:0 txqueuelen:1000
>         RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>         Memory:dffc0000-e0000000
> 
> lo      Link encap:local loopback
>         inet addr:127.0.0.1 Mask:255.0.0.0
>         inet6 addr: ::1/128 Scope:Host
>         UP LOOPBACK RUNNING MTU:16436 Metric:1
>         RX packets:11997 errors:0 dropped:0 overruns:0 frame:0
>         TX packets:11997 errors:0 dropped:0 overruns:0 carrier:0
>         collisions:0 txqueuelen:0
>         RX bytes:4997217 (4.7 Mib) TX bytes:4997217 (4.7 Mib)
> ==================================================================
> 
> I checked /etc/resolve.conf, system-config-network and everything
> is in order.

What makes you think that you have lost your network? ifconfig shows
that networking is running and has an IP address (10.1.0.8).

We'll need some additional information:

* How do you have your network configured? Are you using a static IP
address or DHCP to assign and address?

* What gave you the impression the networking is not working?
Specifically what did you do and how did it fail (eg, I typed 'ftp
ftp.microsoft.com' and ftp returned the error 'Blah blah blah.)

* What what output do you get when your run the '/sbin/route' command?


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]