[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Fedora 8 and Dual Opterons - Seg Fault During Boot



On Fri, 2008-01-25 at 22:41 +0200, Gilboa Davara wrote:

> What kind of RAID is it?
> SATA? SCSI?
> What chipset are you using?
> Motherboard?
> 
> - Gilboa
> 

It has raid on the MOBO but I don't remember how we set it up originally
(way back when with Fedora 3). I don't remember if we used the raid on
the MOBO or did it via software.

[root bilonick log]# lspci
00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev
03)
00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD]
AMD-8111 AC97 Audio (rev 03)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12)
00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
(rev 12)
00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X
Gigabit Ethernet (rev 02)
03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev
0b)
03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev
0b)
03:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3114
[SATALink/SATARaid] Serial ATA Controller (rev 02)
03:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
04:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System
Controller (rev 14)
04:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge
(rev 14)
05:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon
9200 SE] (rev 01)
05:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE]
(Secondary) (rev 01)

As I said previously, once I switched to the vesa driver, I get a 1280x
1040 display. I looked at the X log when trying the radeon driver - I
don't see any problems - it correctly identifies the monitor as a Dell
P1110 and knows that it can do up to 1800x1440. But when using the
radeon driver with Fedora 8, the display looks like old analog TV with a
rolling, distorted screen that is unusable. (It works fine under Fedora
7 and all the way back to Fedora 3).

I got nowhere with the ATI proprietary flgrx driver (from their web
page) but was able to install this via an rpm from livna. I did this
remotely so I won't be able to really try this driver until I go back to
the office on Monday.

Rick


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]