Getting the Trust 380 USB 2.0 Space at m to work

[Gijs]

Hey list,

I'm trying to get the 380 USB 2.0 spacec at m to work, but so far I haven't 
had much luck.
I've never tried getting an USB camera to work before, so I'm probably 
missing out on RPM packages and whatnot.

When I plug the thing in my laptop it gives me the following in dmesg:
usb 1-5: USB disconnect, address 3
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=0e96, idProduct=c001
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 PC Camera
usb 1-5: Manufacturer: APLUX

The output from lsusb is the following:
Bus 001 Device 003: ID 0e96:c001 Aplux Communications, Ltd TRUST 380 
USB2 SPACEC at M
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical 
Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

I've tried running Cheese but the program didn't give me anything. It 
just shows me some test-screen (guess that's the default screen).

Since the webcam is pretty old, I thought that there has to be a driver 
somewhere that supports it. But I really have no idea which driver it 
should be.
Does anyone have any ideas?

Regards, Gijs