VPN Client in fedora 8 for Microsoft VPN server: routing problem?
Zvi Kave
tzvik at razlee.com
Thu Jul 24 08:59:06 UTC 2008
Hi,
I can not access the required IP behind the MS server.
Seems that the VPN PPTP connection to MS PPTP server is OK as from the
/var/log/messages, but I can not access the required IP behind the MS
server.
(But from Windows XP , I have no problems to connect to desired IP)
Here are the details:
1. Before starting my netstat -r
(1.1.1.0 is my local network)
Destination Gateway Genmask Flags MSS
Window irtt Iface
1.1.1.0 0.0.0.0 255.255.255.0 U 0
0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0
0 virbr0
169.254.0.0 0.0.0.0 255.255.0.0 U 0
0 0 eth0
0.0.0.0 1.1.1.254 0.0.0.0 UG 0
0 0 eth0
After command: pppd call vpn1
I got the following messages in /var/log/messages
Jul 22 14:21:14 razleefs pppd[2898]: pppd 2.4.4 started by root, uid 0
Jul 22 14:21:14 razleefs pppd[2898]: Using interface ppp0
Jul 22 14:21:14 razleefs pppd[2898]: Connect: ppp0 <--> /dev/pts/3
Jul 22 14:21:20 razleefs pptp[2900]: anon log[main:pptp.c:276]: The synchro
pptp option is NOT activated
Jul 22 14:21:22 razleefs pptp[2917]: anon warn[ctrlp_disp:pptp_ctrl.c:955]:
zero Async Control Character Maps are not supported!
Jul 22 14:21:22 razleefs pppd[2898]: CHAP authentication succeeded
Jul 22 14:21:22 razleefs kernel: PPP MPPE Compression module registered
Jul 22 14:21:22 razleefs pppd[2898]: MPPE 128-bit stateless compression ena
Jul 22 14:21:23 razleefs pppd[2898]: local IP address 192.168.10.14
Jul 22 14:21:23 razleefs pppd[2898]: remote IP address 192.168.10.12
Jul 22 14:21:23 razleefs pppd[2898]: primary DNS address 192.168.10.1
Jul 22 14:21:23 razleefs pppd[2898]: secondary DNS address 192.168.0.5
I understand that it means that connection is ready.
netstat -r is now:
Destination Gateway Genmask Flags MSS
Window irtt Iface
192.168.10.12 0.0.0.0 255.255.255.255 UH 0 0
0 ppp0
1.1.1.0 0.0.0.0 255.255.255.0 U 0
0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0
0 virbr0
169.254.0.0 0.0.0.0 255.255.0.0 U 0
0 0 eth0
0.0.0.0 1.1.1.254 0.0.0.0 UG 0
0 0 eth0
I need now to get connection to IP 172.25.9.64 behind the Windows VPN
server.
I understand that I can not do it without some route commands.
I tried the suggested commands in vain:
route add -net 192.168.10.0 netmask 255.255.255.0 dev ppp0
route add -net 172.25.9.0 netmask 255.255.255.0 dev ppp0
Now I tried ping 172.25.9.64 but it hanged up,
and I got the message:
ping 172.25.9.64
PING 172.25.9.64 (172.25.9.64) 56(84) bytes of data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
telnet 172.25.9.64 hangs up
I am looking for correct route commands to make it working.
Regards,
Zvi
More information about the fedora-list
mailing list