nic bonding Fedora 8

[Steve Repo]

On Tue, Sep 23, 2008 at 10:43 PM, Chris Snook <csnook at redhat.com> wrote:
> Frank Murphy wrote:
>>
>> On Tue, 2008-09-23 at 09:08 -0400, Mark Haney wrote:
>>
>>> Yeah it's included, I use it all the time between GigE ports on my data
>>> servers.
>>>
>>>
>>
>> Should the bond0 be controlled by NM or network?
>
> Network.  Here's the bonding configuration (eth1 and eth2) on my F8 test
> box. You'll want to customize this.  There's good bonding documentation on
> kbase.redhat.com.  It was written for RHEL, but it applies to Fedora too.
>
> -- Chris
>
> [root at bernoulli ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond0
> DEVICE=bond0
> BONDING_OPTS="mode=1 miimon=100 primary=eth1"
> BOOTPROTO=none
> ONBOOT=no
> NETWORK=169.254.0.0
> NETMASK=255.255.255.0
> IPADDR=169.254.0.2
>
> [root at bernoulli ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
> # Intel Corporation 82557/8/9 Ethernet Pro 100
> DEVICE=eth1
> ONBOOT=no
> BOOTPROTO=none
> HWADDR=00:90:27:a3:7f:a0
> SLAVE=yes
> MASTER=bond0
>
> [root at bernoulli ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth2
> # Intel Corporation 82557/8/9 Ethernet Pro 100
> DEVICE=eth2
> ONBOOT=no
> BOOTPROTO=none
> HWADDR=00:07:e9:17:8d:f7
> SLAVE=yes
> MASTER=bond0
>
> [root at bernoulli ~]# cat /etc/modprobe.conf
> alias eth0 tg3
> alias scsi_hostadapter libata
> alias scsi_hostadapter1 ata_piix
> alias scsi_hostadapter2 ahci
> alias snd-card-0 snd-hda-intel
> options snd-card-0 index=0
> options snd-hda-intel index=0
> alias eth1 e100
> alias eth2 e100
> alias bond0 bonding


Thanks! Saved a lot of research time :)