F12 installation problem

[hongwei hou]

It seems you use the lvm provied by fc11 defaultly . in fc12 it seems not
work "./dev/md/0_0: No such device" means could not found the /dev/md/....
.Re format the disk and have try ! Good luck!

2009/12/1, Peter J. Stieber <developer at toyon.com>:
>
> I'm trying to use x86_64 network install CD to load F12 on an ASUS P5Q MB.
>  The machine was successfully running F11.  I tried to upgrade using the
> network install CD, but I ran into some problem.  I blamed this on the fact
> I was also using the rpm fusion repository, but I didn't really look into
> the cause.  I reloaded F12 from scratch, wiping out the original install.  I
> made it to the reboot prompt, but when I rebooted I was left with...
>
> Boot has failed, sleeping forever.
>
> I booted using the rescue CD, mounted the drive, and removed rhgb and quite
> from the grub.conf file.  The result hinted that a raid device wasn't
> detected.  The machine only has on SATA drive and it was never setup or used
> in a raid configuration.  Here's what I see when I try to boot the
> machine...
>
> [drm] DAC-10: set mode 1280x1024 1d
> Console: switching to colour frame buffer device 160x64
> [drm] nouveau 0000:01:00.0: 0x121B: parsing clock script 0
> fb0: nouveaufb frame buffer device
> registered panic notifier
> [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
> dracut: Starting plymouth daemon
> dracut: Starting plymouth daemon
> dracut: rd_NO_DM: removing DM RAID activation
> dracut: rd_NO_DM: removing DM RAID activation
> dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
> dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
> Initializing USB Mass Storage driver...
> scsi4 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> md: bind<sda>
> dracut: Assembling MD RAID arrays
> dracut: Assembling MD RAID arrays
> md: linear personality registered for level -1
> linear: not enough drives present. Aborting'
> md: pers->run() failed ...
> dracut: mdadm: failed to start array /dev/md/0_0: No such device
> dracut: mdadm: failed to start array /dev/md/0_0: No such device
> scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-105 1.21 PQ: 0 ANSI: 0
> sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 4:0:0:0: Attached scsi generic sg1 type 5
> dracut: rd-NO_DM: removing DM RAID activation
> dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
> dracut: Assembling MD RAID arrays
> dracut: mdadm: failed to start array /dev/md/0_0: No such device
>
> Boot has failed, sleeping forever.
>
> Any ideas?
> Pete
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
> Guidelines:
> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20091202/a9f54bc7/attachment-0001.htm>