[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Scanning over network in Fedora 11



Am 11.07.2009 20:00, schrieb Anthony Messina:


in my xinetd, my service file is "sane-port" not just "sane"
(/etc/xinetd.d/sane-port)

not sure if you're using tcpwrappers or not, but you may need the following in
/etc/hosts.allow

sane-port: 192.168.2.0/255.255.255.0
saned: 192.168.2.0/255.255.255.0

and in /etc/sane.d/dll.conf, the "net" must be uncommented.

you may also need to expand your sane-port xinetd service definition.  mine
looks like:

service sane-port
         {
                 disable = no
                 port = 6566
                 socket_type = stream
                 protocol = tcp
                 wait = no
                 user = nobody
                 group = nobody
                 server = /usr/sbin/saned
                 only_from = 192.168.2.0/24
                 bind = 192.168.2.3
                 flags = IPv4
         }

it all works here.  -a


Thanks, Anthony,

I've tried your suggestions one after the other, but still no success:

- rename service file
- adding lines to hosts.allow (I don't use tcpwrappers anyway)
- "net" was already uncommented in dll.conf
- using you service file (with bind=192.168.2.35, which is my host's ip)

Klaus


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]