f10dvd installs but won't boot
jackson byers
byersjab at gmail.com
Fri May 8 16:54:41 UTC 2009
jbyers:
> Any ideas on the failing X server?
>
----
Craig:
not really but /var/log/Xorg.0.log and /var/log/Xorg.setup.log should be
able to tell you/us what the problem is. If you do post the Xorg.0.log
to the list, you might want to also include output of 'lspci -v' too
Craig
------
jbyers:
Ok, Xorg.0.log is huge, I will try to cut out large number of modelines
[root at bootp log]# ls -l X*
-rw-rw-r-- 1 root byers 43222 May 7 07:54 Xorg.0.log
-rw-rw-r-- 1 root byers 361 May 7 07:39 Xorg.0.log.old
-rw-r--r-- 1 root root 743 May 7 12:00 Xorg.setup.log
first:
[root at bootp log]# less Xorg.setup.log
Fatal server error:
Server is already active for display 17
If this server is no longer running, remove /tmp/.X17-lock
and start again.
Current Operating System: Linux localhost.localdomain 2.6.27.21-170.2.56.fc10.i6
86 #1 SMP Mon Mar 23 23:37:54 EDT 2009 i686
Build Date: 10 March 2009 07:20:48PM
Build ID: xorg-x11-server 1.5.3-15.fc10
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/dev/null", Time: Thu May 7 11:57:39 2009
(++) Using config file: "/tmp/tmpfnALSkxorg.config"
Xorg.setup.log (END)
----
that /tmp/tmpfnALSkxorg.config file no longer exists.
I believe i removed /tmp/.X17-lock
and tried again
-rw-r--r-- 1 root root 596 May 7 10:52 tmp5zEjJzxorg.config
-rw-r--r-- 1 root root 596 May 7 11:40 tmpdHrbUuxorg.config
-rw-r--r-- 1 root root 596 May 7 10:50 tmphwdZ4Gxorg.config
-rw-r--r-- 1 root root 596 May 7 12:00 tmpq7w3ikxorg.config
the last one looks very crude:
[root at bootp tmp]# less tmpq7w3ikxorg.config
# Xorg configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105+inet"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "mga"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
--------------------------------
here is lspci
[root at bootp ~]# lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
Host-to-AGP Bridge (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC
Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01)
02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X
Gigabit Ethernet (rev 02)
02:0b.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
02:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
02:0c.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
[root at bootp ~]#
from lspci -v for the matrox:
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP
(rev 01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb
Flags: bus master, medium devsel, latency 64, IRQ 201
Memory at f6000000 (32-bit, prefetchable) [size=32M]
Memory at f5000000 (32-bit, non-prefetchable) [size=16K]
Memory at f4800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at f5fe0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
------------
is AGP video card a problem?????
Here is Xorg.0.log
heavily edited to reduce size
I am reluctant to post this huge file as is
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-92.1.10.el5 i686
Current Operating System: Linux localhost.localdomain
2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686
Build Date: 16 November 2008 08:29:02PM
Build ID: xorg-x11-server 1.5.3-5.fc10
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 7 07:52:06 2009
(EE) Unable to locate/open config file
(II) Loader magic: 0x81f4400
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0 at 1:0:0) Matrox Graphics, Inc. MGA G550 AGP rev 1, Mem @
0xf6000000/0, 0xf5000000/0, 0xf4800000/0, BIOS @ 0x????????/131072
(==) Matched mga for the autoconfigured driver
New driver is "mga"
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default mga Device 0"
Driver "mga"
EndSection
Section "Screen"
Identifier "Builtin Default mga Screen 0"
Device "Builtin Default mga Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default mga Screen 0"
Screen "Builtin Default fbdev Screen 0"
Screen "Builtin Default vesa Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default mga Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default mga Device 0"
(==) No monitor specified for screen "Builtin Default mga Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SELinux
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers//mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 1.4.99.902, module version = 1.4.9
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.4.99.2, module version = 0.3.1
ABI class: X.Org Video Driver, version 4.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.4.99.905, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 Maxim, mgag200 Winbond,
mgag400, mgag550
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01 at 00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.0.2
ABI class: X.Org Video Driver, version 4.1
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(--) MGA(0): Chipset: "mgag550"
(II) MGA(0): Creating default Display subsection in Screen section
"Builtin Default mga Screen 0" for depth/fbbpp 24/32
(==) MGA(0): Depth 24, (==) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using HW cursor
(==) MGA(0): Using XAA acceleration
(--) MGA(0): Linear framebuffer at 0xF6000000
(--) MGA(0): MMIO registers at 0xF5000000
(--) MGA(0): Pseudo-DMA transfer window at 0xF4800000
(--) MGA(0): Video BIOS info block at offset 0x07CE0
(--) MGA(0): VideoRAM: 32768 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C device "DDC P1:E-EDID segment register" registered at
address 0x60.
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) MGA(0): initializing int10
(II) MGA(0): Primary V_BIOS segment is: 0xc000
(II) MGA(0): VESA BIOS detected
(II) MGA(0): VESA VBE Version 3.0
(II) MGA(0): VESA VBE Total Mem: 32768 kB
(II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
(II) MGA(0): VESA VBE OEM Software Rev: 1.4
(II) MGA(0): VESA VBE OEM Vendor: Matrox
(II) MGA(0): VESA VBE OEM Product: Matrox G550
(II) MGA(0): VESA VBE OEM Product Rev: 00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) MGA(0): VESA VBE DDC supported
(II) MGA(0): VESA VBE DDC Level 2
(II) MGA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) MGA(0): VESA VBE DDC read successfully
(II) MGA(0): VBE DDC Monitor info: 0x8b23a20
(II) MGA(0): Manufacturer: MEL Model: 43f0 Serial#: 18202
(II) MGA(0): Year: 2000 Week: 20
(II) MGA(0): EDID Version: 1.1
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) MGA(0): Sync: Separate Composite SyncOnGreen
(II) MGA(0): Max Image Size [cm]: horiz.: 40 vert.: 30
(II) MGA(0): Gamma: 2.20
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): GTF timings supported
(II) MGA(0): redX: 0.625 redY: 0.340 greenX: 0.290 greenY: 0.605
(II) MGA(0): blueX: 0.150 blueY: 0.070 whiteX: 0.283 whiteY: 0.297
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 720x400 at 70Hz
(II) MGA(0): 720x400 at 88Hz
(II) MGA(0): 640x480 at 60Hz
(II) MGA(0): 640x480 at 67Hz
(II) MGA(0): 640x480 at 72Hz
(II) MGA(0): 640x480 at 75Hz
(II) MGA(0): 800x600 at 56Hz
(II) MGA(0): 800x600 at 60Hz
(II) MGA(0): 800x600 at 72Hz
(II) MGA(0): 800x600 at 75Hz
(II) MGA(0): 832x624 at 75Hz
(II) MGA(0): 1024x768 at 87Hz (interlaced)
(II) MGA(0): 1024x768 at 60Hz
(II) MGA(0): 1024x768 at 70Hz
(II) MGA(0): 1024x768 at 75Hz
(II) MGA(0): 1280x1024 at 75Hz
(II) MGA(0): 1152x870 at 75Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported Future Video Modes:
(II) MGA(0): #0: hsize: 1600 vsize 1200 refresh: 85 vid: 22953
(II) MGA(0): #1: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) MGA(0): #2: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) MGA(0): #3: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) MGA(0): #4: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) MGA(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) MGA(0): #6: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) MGA(0): #7: hsize: 1800 vsize 1440 refresh: 70 vid: 35522
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 229.5 MHz Image Size: 393 x 295 mm
(II) MGA(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end
2160 h_border: 0
(II) MGA(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking:
1250 v_border: 0
(II) MGA(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 108
kHz, PixClock max 330 MHz
(II) MGA(0): Monitor name: NSH1117K
(II) MGA(0): Serial No: 005018202
(II) MGA(0): EDID (in hex):
(II) MGA(0): 00ffffffffffff0034acf0431a470000
(II) MGA(0): 140a01010e281e78e90488a0574a9b26
(II) MGA(0): 12484cffff80a959a94f8199818f6159
(II) MGA(0): 714f4559c28aa659403062b0324040c0
(II) MGA(0): 130089271100001e000000fd0032a01e
(II) MGA(0): 6c21000a202020202020000000fc004e
(II) MGA(0): 5348313131374b0a20202020000000ff
(II) MGA(0): 003030353031383230320a20202000ab
(II) MGA(0): end of VBE DDC Monitor info
(II) MGA(0): EDID vendor "MEL", prod id 17392
(II) MGA(0): Using EDID range info for horizontal sync
(II) MGA(0): Using EDID range info for vertical refresh
(II) MGA(0): Printing DDC gathered Modelines:
(II) MGA(0): Modeline "1600x1200"x0.0 229.50 1600 1664 1856 2160
1200 1201 1204 1250 +hsync +vsync (106.2 kHz)
(II) MGA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601
605 628 +hsync +vsync (37.9 kHz)
....
(II) MGA(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601
604 631 +hsync +vsync (53.7 kHz)
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 1200 MHz
(II) MGA(0): <default monitor>: Using hsync range of 30.00-108.00 kHz
(II) MGA(0): <default monitor>: Using vrefresh range of 50.00-160.00 Hz
(II) MGA(0): <default monitor>: Using maximum pixel clock of 330.00 MHz
(II) MGA(0): Estimated virtual size for aspect ratio 1.3333 is 1600x1200
(II) MGA(0): Clock range: 17.75 to 1200.00 MHz
(II) MGA(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
...
(II) MGA(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240
242 254 doublescan -hsync -vsync (43.3 kHz)
(**) MGA(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "360x200"x85.0 17.75 360 378 414 468 200 200
202 223 doublescan -hsync +vsync (37.9 kHz)
(**) MGA(0): Display dimensions: (400, 300) mm
(**) MGA(0): DPI set to (101, 101)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 32 depth: 24
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
...
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmGetBusid returned ''
(II) [drm] loaded kernel module for "mga" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
(II) MGA(0): [drm] framebuffer handle = 0xf6000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): X context handle = 0x1
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (1600,2399)
(II) MGA(0): Largest offscreen area available: 1600 x 1199
(II) MGA(0): Reserved back buffer at offset 0xea6000
(II) MGA(0): Reserved depth buffer at offset 0x15f9000
(II) MGA(0): Reserved 2768 kb for textures at offset 0x1d4c000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
19 256x256 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(II) MGA(0): [drm] dma control initialized, using IRQ 16
(II) MGA(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: drmOpenMinor returns 14
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: Loaded and initialized /usr/lib/dri/mga_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Power Button (CM)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Power Button (CM): always reports core events
(**) Power Button (CM): Device: "/dev/input/event1"
(II) Power Button (CM): Found keys
(II) Power Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Power Button (CM): xkb_rules: "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Power Button (CM): xkb_model: "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Power Button (CM): xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105+inet"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Power Button (FF)
(**) Power Button (FF): always reports core events
(**) Power Button (FF): Device: "/dev/input/event0"
(II) Power Button (FF): Found keys
(II) Power Button (FF): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Power Button (FF): xkb_rules: "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Power Button (FF): xkb_model: "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Power Button (FF): xkb_layout: "us"
(II) config/hal: Adding input device PS2++ Logitech Wheel Mouse
(**) PS2++ Logitech Wheel Mouse: always reports core events
(**) PS2++ Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) PS2++ Logitech Wheel Mouse: Found x and y relative axes
(II) PS2++ Logitech Wheel Mouse: Found mouse buttons
(II) PS2++ Logitech Wheel Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS2++ Logitech Wheel Mouse"
(type: MOUSE)
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button
emulation" (type: MOUSE)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) PS2++ Logitech Wheel Mouse: Close
(II) UnloadModule: "evdev"
(II) Power Button (FF): Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button (CM): Close
(II) UnloadModule: "evdev"
(II) MGA(0): [drm] removed 1 reserved context for kernel
(II) MGA(0): [drm] unmapping 8192 bytes of SAREA 0xfad4c000 at 0xb7f8b000
(II) MGA(0): [drm] Closed DRM master.
==================
Jack
More information about the fedora-list
mailing list