New scanner/printer combo
Gene Heskett
gene.heskett at verizon.net
Sat Oct 24 18:02:02 UTC 2009
On Saturday 24 October 2009, Louis Lagendijk wrote:
>On Sat, 2009-10-24 at 11:10 -0400, Gene Heskett wrote:
>> On Saturday 24 October 2009, Louis Lagendijk wrote:
>> >> Problem 2 is that the scanner doesn't even check in as shown above.
>> >> OTOH, I also have an Epson 1250u that works flawlessly, but it would
>> >> be nice to get rid of one rather high occupancy item here in the
>> >> coyote.den.
>> >
>> >and this is the strange part: why does it not show the scanner? What
>> >does lsusb return? Does the scanner work under Windows? Not that it
>> >matters much as the scanner seems not supported by Sane right now. But
>> >maybe this is just a matter of adding the usb id....
>> >
>> >Louis
>>
>> The scanner does show in an lsusb -v, but not without the -v, here is a
>> snippet:
>> ==========================
>> Bus 001 Device 002: ID 04b8:0856 Seiko Epson Corp.
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 2.00
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 64
>> idVendor 0x04b8 Seiko Epson Corp.
>> idProduct 0x0856
>> bcdDevice 1.00
>> iManufacturer 1 EPSON
>> iProduct 2 USB2.0 MFP(Hi-Speed)
>> iSerial 3 4C454C593037313524
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 78
>> bNumInterfaces 3
>> bConfigurationValue 1
>> iConfiguration 4 USB2.0 MFP(Hi-Speed)
>> bmAttributes 0xc0
>> Self Powered
>> MaxPower 2mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 2
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 255 Vendor Specific Subclass
>> bInterfaceProtocol 255 Vendor Specific Protocol
>> iInterface 5 EPSON Scanner
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x01 EP 1 OUT
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 1
>> bAlternateSetting 0
>> bNumEndpoints 2
>> bInterfaceClass 7 Printer
>> bInterfaceSubClass 1 Printer
>> bInterfaceProtocol 2 Bidirectional
>> iInterface 6 USB2.0 Printer
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x04 EP 4 OUT
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x85 EP 5 IN
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 2
>> bAlternateSetting 0
>> bNumEndpoints 2
>> bInterfaceClass 8 Mass Storage
>> bInterfaceSubClass 6 SCSI
>> bInterfaceProtocol 80 Bulk (Zip)
>> iInterface 7 USB2.0 Mass Storage
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x07 EP 7 OUT
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x88 EP 8 IN
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Device Qualifier (for other device speed):
>> bLength 10
>> bDescriptorType 6
>> bcdUSB 2.00
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 64
>> bNumConfigurations 1
>> Device Status: 0x0001
>> Self Powered
>> ============================
>>
>> Thanks.
>
>I suggest to keep an eye on http://avasys.jp/eng/linux_driver/
>these guys make some linux drivers for Epson devices (they are in some
>way related to Epson). I see that they already have Imagescan for the
>NX415 (actually Image Scan! for Linux & Photo Image Print System Lite)
>Click on the download for "all in ones", select the NX415 and of you
>go.....
>
>
>Good luck|
>
>Louis
>
Thank you Louis, I pulled everything related and will have an install fest
shortly, as in a couple of days. Or less. I see there were rpms for it, so
I'll try them first, right now in fact. Oh oh, it seems to be looking for
kernels in the 2.6.31.corner:
[root at coyote rpms]# rpm -Uvh Epson-MFD-*
Preparing... ###########################################
[100%]
1:pipslite ########################################### [
50%]
Install Message > Described entry of LITE in services.
Install Message > Backup file is /etc/services.bak.
Install Message > Start /usr/lib/pipslite/setup to change setup.
Install Message > Start /usr/bin/pipslite-install to make ppd file.
2:iscan ###########################################
[100%]
gzip: /boot/initrd-2.6.31.1.img.old: unexpected end of file
cpio: premature end of archive
gzip: /boot/initrd-2.6.31.2.img.old: unexpected end of file
cpio: premature end of archive
gzip: /boot/initrd-2.6.31.2-rc1.img.old: unexpected end of file
cpio: premature end of archive
gzip: /boot/initrd-2.6.31.3.img.old: unexpected end of file
cpio: premature end of archive
gzip: /boot/initrd-2.6.31.4.img.old: unexpected end of file
cpio: premature end of archive
Those files are probably zero length files and are an artifact of the method
my "makeit" scripts goes about installing a new kernel. I keep a backup of
the previous version, and the only way to do that is with touch, then rm
because if rm can't find it, its showstopper error to my script.
Running /usr/lib/pipslite/setup I set it to be lp3 and saved it. So I jumped
through a few hoops, and added it to cups, but it won't be of any use to me
as it only has 2 paper size settings, A4 and some small photo size.
Ok, the scanner; That looks easy enough, but again the size of the scan is
stuck at A4 and no option in the gui can change it. I told it to copy a cups
test sheet on letter and the printer is merrily munching away, using the cups
NX400 lp2 preset. I will also change it to use the lp3 version as this color
looks a wee bit washed out. It also expanded the image to fit an A4 I
believe, the upper, lower and left edges are trimmed quite a bit.
I wonder it there are USian, letter sized downloads available... Lacking the
scan area trims of xsane, it isn't anywhere near as usable as xsane is.
Thanks again Louis, at least I know it works now.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
The NRA is offering FREE Associate memberships to anyone who wants them.
<https://www.nrahq.org/nrabonus/accept-membership.asp>
Even bytes get lonely for a little bit.
More information about the fedora-list
mailing list