[O/T] raptor 10000rpm ide disks
Neal D. Becker
nbecker at hns.com
Tue Nov 4 16:49:01 UTC 2003
I just got a pair of WD raptor disks, which are SATA 10000rpm. Sweet, right?
No! They are connected to Asus A7N8X MB, which has SiI3112 Serial ATA
(according to dmesg).
hdparm -t shows TERRIBLE slow results.
/sbin/hdparm /dev/hde
/dev/hde:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 4500/255/63, sectors = 72303840, start = 0
OK, now try with DMA turned on. Locks up machine. Here's what was logged:
Nov 4 11:30:56 rpppc1 kernel: blk: queue c03c61e8, I/O limit 4095Mb (mask
0xffffffff)
Nov 4 11:31:01 rpppc1 kernel: hde: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Nov 4 11:31:01 rpppc1 kernel: hde: dma_intr: error=0x10 { SectorIdNotFound },
LBAsect=1099511642367, high=65536, low=14591, sector=0
Nov 4 11:31:21 rpppc1 kernel: hde: dma_timer_expiry: dma status == 0x21
This is with kernel 2.4.20-20.9.
More information about the fedora-test-list
mailing list