Burning Disk 1
Bob Gill
gillb4 at telusplanet.net
Mon May 3 05:05:26 UTC 2004
Hi. I recently downloaded Fedora Core 2 test3 for testing. I checked
all of the files I downloaded with md5checksum and all came out ok. The
problem I have is burning the software from disk 1. Disks 2,3 and 4 all
burned successfully, and checksums for the disks are ok. I burned disk1
onto a 650MB CDRW using cdrecord -v -v -v -v -speed=4 -dev=/dev/cdrom1
-blank=fast -overburn FC2-test3-i386-disc1.iso. Checksum fails. I've
used different CDRW disks, and 2 CDR (700MB) disks, with all
burns/checksums bad. I can go back and burn 650MB of other data to the
CDRW disk without problems. Is there something special that I have to
do to burn disk1? I'm currently running FC1 updated with yum, and
Kernel 2.6.6-rc3-bk3. I have also installed hotplug/udev (without
problems). I understand that the disk1 iso might not fit on a 650MB
CDRW, but after 2 bad burns on CDR, I'm asking questions. The error
message I get when the burn dies is:
[root at localhost temp]# cdrecord -v -speed=4 -blank=fast -overburn
-dev=/dev/cdrom1 FC2-test3-i386-disc1.iso
Cdrecord-Clone 2.01a19 (i686-redhat-linux-gnu) Copyright (C) 1995-2003 J
rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrom1'
devname: '/dev/cdrom1'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c
1.75 02/10/21 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MITSUMI '
Identifikation : 'CR-4804TE '
Revision : '2.4C'
Device seems to be: Philips CDD-522.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET RAW/R16 RAW/R96R
Drive buf size : 1343488 = 1312 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 631 MB
Total size: 725 MB (71:53.00) = 323475 sectors
Lout start: 725 MB (71:55/00) = 323475 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 36374
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 431 of 631 MB written (fifo 100%) [buf 99%]
4.0x.cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 03 5F 47 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.401s timeout 40s
write track data: error after 452605952 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing time: 748.354s
Average write speed 5.8x.
Min drive buffer fill was 94%
Fixating...
Fixating time: 62.244s
cdrecord: fifo had 7193 puts and 7130 gets.
cdrecord: fifo was 0 times empty and 7084 times full, min fill was 95%.
[root at localhost temp]# df Filesystem 1K-blocks Used
Available Use% Mounted on
/dev/hda3 18625588 8088720 9590736 46% /
/dev/hda1 29249 19443 8296 71% /boot
none 518664 0 518664 0% /dev/shm
/dev/hdb1 80033348 59618600 20414748 75% /data
/dev/sdb1 134210908 44605708 89605200 34% /mnt/fire
/dev/sda1 134210908 30327052 103883856 23% /mnt/fire2
[root at localhost temp]# eject /mnt/cdrom1
[root at localhost temp]# mount /mnt/cdrom1
df
[root at localhost temp]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda3 18625588 8088720 9590736 46% /
/dev/hda1 29249 19443 8296 71% /boot
none 518664 0 518664 0% /dev/shm
/dev/hdb1 80033348 59618600 20414748 75% /data
/dev/sdb1 134210908 44605708 89605200 34% /mnt/fire
/dev/sda1 134210908 30327052 103883856 23% /mnt/fire2
/dev/cdrom1 646946 646946 0 100% /mnt/cdrom1
4ae4c6449d68933309968ad5c545c668 FC2-test3-i386-disc1.iso
a4966b24af192952de3016d96153323f FC2-test3-i386-disc2.iso
83e93f40e6b945e5a2c8cc04772ab085 FC2-test3-i386-disc3.iso
baba457bb27a7e9ed1a9832f6d1659cf FC2-test3-i386-disc4.iso
-----------------------------------------------------------
cdrecord -prcap -dev=/dev/cdrom1 shows:
Maximum read speed: 4234 kB/s (CD 24x, DVD 3x)
Maximum write speed: 706 kB/s (CD 4x, DVD 0x)
Buffer size in KB: 2048
(so I can write at 4x without problems). The writer is (actually) an HP
CD-writer Plus.
Thanks,
Bob
More information about the fedora-test-list
mailing list