FC3T2 candidate

[Gregory Woodbury]

On Wed, Sep 08, 2004 at 08:15:32PM -0400, Jim Cornette wrote:
> Phil Schaffner wrote:
> >Same problem here.  Also can't get network install to work.  Seems to be
> >the same problem as
> >https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=131293
> 
> I have a toranado card, but this is a 01:00.0 Ethernet controller: 3Com 
> Corporation 3c905C-TX/TX-M [Tornado] (rev 74).
> 
> This works fine with the latest kernels - kernel-2.6.8-1.541 and
> kernel-2.6.8-1.540. I am running with acpi=on specified in the grub.conf 
> file. I get an inet address and everything. With the reealtech NIC, I 
> get a hardware address, but no inet address.
> 
> Realtech - alias eth0 ne2k-pci
> eth0      Link encap:Ethernet  HWaddr 52:54:05:E4:A4:39
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:9 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:2694 (2.6 KiB)  TX bytes:1938 (1.8 KiB)
>           Interrupt:10 Base address:0xdf80
> 
> The "Other" Tornado - alias eth1 3c59x
> eth1      Link encap:Ethernet  HWaddr 00:01:02:FA:69:F3
>           inet addr:192.168.1.103  Bcast:192.168.1.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:302 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:261 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:254994 (249.0 KiB)  TX bytes:27932 (27.2 KiB)
>           Interrupt:11 Base address:0xdc00
> 
> Kernel line specifying acpi=on
>         kernel /vmlinuz-2.6.8-1.541 ro root=LABEL=/1 acpi=on 3
>         initrd /initrd-2.6.8-1.541.img

This eth0 not getting an IP address is bugzilla #132038

-- 
G.Wolfe Woodbury     `- -'
RHCT                   U
The Line Eater is a boojum!