FC3T2 No sound

Mike Loiterman mike at ascendency.net
Mon Sep 27 21:24:20 UTC 2004


FC1 I had sound.
FC2 I had sound but it was barely audible.
FC3T2 I have no sound at all.

I have turned up everything in the sound control box and made sue my sound
is unmuted.

I have an inspiron7000.

Below is contents of dmesg

Linux version 2.6.8-1.541 (bhcompile at porky.build.redhat.com) (gcc version
3.4.1
20040831 (Red Hat 3.4.1-10)) #1 Wed Sep 1 18:01:20 EDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000eb800 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000014000000 (usable)
 BIOS-e820: 00000000fffeb800 - 0000000100000000 (reserved)
0MB HIGHMEM available.
320MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 81920
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 77824 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: Unable to locate RSDP
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023c6000 soft=023c5000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 300.108 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 320400k/327680k available (2024k kernel code, 6780k reserved, 631k
data,
 144k init, 0k highmem)
Calibrating delay loop... 589.82 BogoMIPS (lpj=294912)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0183f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps:        0183f1ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: System description tables not found
    ACPI-0084: *** Error: acpi_load_tables: Could not get RSDP, AE_NOT_FOUND
    ACPI-0134: *** Error: acpi_load_tables: Could not load tables:
AE_NOT_FOUND
ACPI: Unable to load the System Description Tables
checking if image is initramfs... it is
Freeing initrd memory: 572k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9d3, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
get_random_bytes called before random driver initialization
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI: IRQ 0 for device 0000:00:04.0 doesn't match PIRQ mask - try
pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:04.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: IRQ 0 for device 0000:00:04.1 doesn't match PIRQ mask - try
pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:04.1
PCI: Sharing IRQ 11 with 0000:00:03.0
get_random_bytes called before random driver initialization
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1096238419.577:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key EB180CB126A51024
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 263M
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST92011A, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TORiSAN DVD-ROM DRD-U624, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: ATAPI DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
 Firmware: 4.3
 180 degree mounted touchpad
 Sensor: 8
 new absolute packet format
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 144k freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
inserting floppy driver for 2.6.8-1.541
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PCI: Found IRQ 5 for device 0000:00:08.0
es1968: not attempting power management.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
es1968: clocking to 48000
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0000fce0
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: over-current change on port 2
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 0000:00:04.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:04.0 [1028:0085]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:04.0, mfunc 0x01021c12, devctl 0x66
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000059
PCI: Found IRQ 11 for device 0000:00:04.1
PCI: Sharing IRQ 11 with 0000:00:03.0
Yenta: CardBus bridge found at 0000:00:04.1 [1028:0085]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:04.1, mfunc 0x01021c12, devctl 0x66
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000006
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02359760(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
EXT3 FS on hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 650624k swap on /dev/hda3.  Priority:-1 extents:1
IA-32 Microcode Update Driver: v1.14 <tigran at veritas.com>
microcode: CPU0 updated from revision 0x15 to 0x2d, date = 05181999
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2560 buckets, 20480 max) - 388 bytes per conntrack
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco 0.13e (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin
<proski
@gnu.org>, et al)
orinoco_cs 0.13e (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin
<pro
ski at gnu.org>, et al)
divert: allocating divert_blk for eth0
eth0: Station identity 001f:0002:0001:0004
eth0: Looks like an Intersil firmware version 1.4.2
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:06:25:15:FD:96
eth0: Station name "Prism  I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
eth0: Error -110 setting multicast list.
eth0: Error -110 setting multicast list.
eth0: Error -110 setting multicast list.
eth0: New link status: Connected (0001)
eth0: New link status: Disconnected (0002)
eth0: New link status: Connected (0001)
eth0: New link status: AP Changed (0003)
eth0: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
cisco_ipsec: module license 'Proprietary' taints kernel.
divert: not allocating divert_blk for non-ethernet device cipsec0
Cisco Systems VPN Client Version 4.6.00 (0045) kernel module loaded
spurious 8259A interrupt: IRQ7.
application firefox-bin uses obsolete OSS audio interface
 CIFS VFS: Error connecting to IPv4 socket. Aborting operation
 CIFS VFS: cifs_mount failed w/return code = -22
eth0: New link status: AP Out of Range (0004)
eth0: New link status: AP In Range (0005)
eth0: Error -110 writing Tx descriptor to BAP
eth0: Error -110 writing Tx descriptor to BAP
eth0: Error -110 writing Tx descriptor to BAP
eth0: Error -110 writing Tx descriptor to BAP
eth0: New link status: Disconnected (0002)
eth0: New link status: Connected (0001)
eth0: New link status: AP Out of Range (0004)
eth0: New link status: AP In Range (0005)
eth0: New link status: Disconnected (0002)
eth0: New link status: Connected (0001)
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.
eth0: Information frame lost.


------------------------------
Mike Loiterman
grantADLER
Tel: 630-302-4944
Fax: 773-442-0992
Email: mike at ascendency.net
PGP Key: 0xD1B9D18E
GPG Key: 0x661D0518




More information about the fedora-test-list mailing list