[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: call for testing, dmraid in rawhide



Peter Jones wrote:

As the changelog says, last night's rawhide build has support for dmraid
during installation.  If anybody wants to test this, I'd be really
appreciative ;)

OK, took me longer than I had hoped backed up odds and sods from my test
box and pull a local mirror of rawhide, but finally got there today

The motherboard is an Intel D945GTP with 2x 250GB SATA drives, which was
previously running rawhide OK, I went into the BIOS and changed SATA
from AHCI to RAID, then went into the BIOS RAID util and created a 100GB
mirror on the first "half" of both disks and a 300GB stripe on the
remaining "half"

I'm booting from a CD of the current rawhide boot.iso my command line is

linux vga=773 dmraid debug console=tty1 console=ttyS0,115200

I get into the "blue" setup screen ok, entered language/keyboard
settings, chose http install and enter suitable url for my mirror, it
retrieves stage2.img ok, detects my ATI card, starts X, shows the
"Fedora core" GUI wallpaper and then anaconda crashes

         __init__.py line 530 in getvalid
	if isinstance(RaidDev, x) or isinstance(RaidSet,x)

to save re-typing I've put a photo capture of the screen here
http://adslpipe.co.uk/dmraid.jpg

I also captured the serial console and attached it below, but I don't
think it shows much of interest. there is the usual output from anaconda
on the other virtual consoles, but they're all locked.

Let me know if there are any other tests you'd like me to try ...

Linux version 2.6.14-1.1771_FC5 (bhcompile hs20-bc1-2 build redhat com)
(gcc version 4.1.0 20051214 (Red Hat 4.1.0-0.9)) #1 Sat Dec 17 20:40:42
EST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
 BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fe4c000 (usable)
 BIOS-e820: 000000003fe4c000 - 000000003fe56000 (ACPI NVS)
 BIOS-e820: 000000003fe56000 - 000000003fe88000 (usable)
 BIOS-e820: 000000003fe88000 - 000000003fee9000 (ACPI NVS)
 BIOS-e820: 000000003fee9000 - 000000003feed000 (usable)
 BIOS-e820: 000000003feed000 - 000000003feff000 (ACPI data)
 BIOS-e820: 000000003feff000 - 000000003ff00000 (usable)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe680
Using x86 segment limits to approximate NX protection
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC disabled (-2); pass 'lapic' to re-enable.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
LAPIC disabled (-2)
Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000)
Built 1 zonelists
Kernel command line: initrd=initrd.img ramdisk_size=8192
BOOT_IMAGE=vmlinuz console=ttyS0,115200 console=tty1
Initializing CPU#0
CPU 0 irqstacks, hard=c03bd000 soft=c03bc000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1029460k/1047552k available (1863k kernel code, 16920k reserved,
741k data, 168k init, 129548k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Using HPET for base-timer
Using HPET for gettimeofday
Detected 3000.142 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 6005.13 BogoMIPS
(lpj=12010261)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e00)
Local APIC disabled by default; use 'lapic' to enable it.
checking if image is initramfs... it is
Freeing initrd memory: 4665k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
report
pnp: 00:05: ioport range 0x500-0x53f has been reserved
pnp: 00:05: ioport range 0x400-0x47f could not be reserved
pnp: 00:05: ioport range 0x680-0x6ff has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 2000-2fff
  MEM window: 50100000-501fffff
  PREFETCH window: 40000000-4fffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: 50300000-503fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: 50400000-504fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
  IO window: disabled.
  MEM window: 50500000-505fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: disabled.
  MEM window: 50600000-506fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: disabled.
  MEM window: 50700000-507fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: 50000000-500fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1c.4[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1c.5[B] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
audit: initializing netlink socket (disabled)
audit(1135010866.884:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 7D3C110B2B3EE5F5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
assign_interrupt_mode Found MSI capability
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
assign_interrupt_mode Found MSI capability
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
assign_interrupt_mode Found MSI capability
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
assign_interrupt_mode Found MSI capability
ACPI: PCI Interrupt 0000:00:1c.4[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB  P32 UAR1 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 UHC1 UHC2 UHC3 UHC4 EHCI
AC9M AZAL
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 168k freed
Write protecting the kernel read-only data: 314k



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]