Fedora Core 4 Test Update: udev-071-0.FC4.2

Wed Feb 1 15:06:55 UTC 2006

dragoran wrote:

> Alan Cox wrote:
>
>> On Wed, Feb 01, 2006 at 04:26:33PM +0200, Gilboa Davara wrote:
>>  
>>
>>>> hda: task_in_intr: status=0x59 { DriveReady SeekComplete 
>>>> DataRequest Error }
>>>> hda: task_in_intr: error=0x10 { SectorIdNotFound }, 
>>>> LBAsect=78221567, sector=78156288
>>>>     
>>>
>>
>> What size is /dev/hda
>>  
>>
> 40GB
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: Host Protected Area detected.
>        current capacity is 78156288 sectors (40016 MB)
>        native  capacity is 78156289 sectors (40016 MB)
> hda: Host Protected Area disabled.
> hda: 78156289 sectors (40016 MB) w/1024KiB Cache, CHS=65535/16/63, 
> UDMA(100)
> hda: cache flushes not supported
> hda: hda1
> what smart info should I post?
>
 smartctl -l error /dev/hda
smartctl version 5.33 [x86_64-redhat-linux-gnu] Copyright (C) 2002-4 
Bruce AllenHome page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 101 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 101 occurred at disk power-on lifetime: 13962 hours (581 days + 18 
hours)
  When the command that caused the error occurred, the device was active 
or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 f0  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 00 00 00 f0 00      00:00:14.471  READ DMA
  b0 da 00 00 4f c2 f0 00      00:00:14.364  SMART RETURN STATUS
  b0 d2 00 00 4f c2 f0 00      00:00:14.364  SMART ENABLE/DISABLE 
ATTRIBUTE AUTOSAVE
  b0 d8 00 00 4f c2 f0 00      00:00:14.364  SMART ENABLE OPERATIONS
  91 00 3f 00 00 00 ff 00      00:00:14.364  INITIALIZE DEVICE 
PARAMETERS [OBS-6]

Error 100 occurred at disk power-on lifetime: 13962 hours (581 days + 18 
hours)
  When the command that caused the error occurred, the device was active 
or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 01 00 00 b1  Error: ICRC, ABRT at LBA = 0x01000001 = 16777217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 40 01 00 00 b1 00      00:01:37.756  READ DMA
  c8 00 40 01 00 00 b1 00      00:01:37.285  READ DMA
  10 00 3f 00 00 00 b0 00      00:01:37.285  RECALIBRATE [OBS-4]
  c8 00 40 01 00 00 b1 00      00:01:36.821  READ DMA
  c8 00 40 01 00 00 b1 00      00:01:36.385  READ DMA

Error 99 occurred at disk power-on lifetime: 13962 hours (581 days + 18 
hours)
  When the command that caused the error occurred, the device was active 
or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 01 00 00 b1  Error: ICRC, ABRT at LBA = 0x01000001 = 16777217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 40 01 00 00 b1 00      00:01:37.285  READ DMA
  10 00 3f 00 00 00 b0 00      00:01:37.285  RECALIBRATE [OBS-4]
  c8 00 40 01 00 00 b1 00      00:01:36.821  READ DMA
  c8 00 40 01 00 00 b1 00      00:01:36.385  READ DMA
  c8 00 08 01 00 00 b0 00      00:01:35.643  READ DMA

Error 98 occurred at disk power-on lifetime: 13962 hours (581 days + 18 
hours)
  When the command that caused the error occurred, the device was active 
or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 01 00 00 b1  Error: ICRC, ABRT at LBA = 0x01000001 = 16777217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 40 01 00 00 b1 00      00:01:36.821  READ DMA
  c8 00 40 01 00 00 b1 00      00:01:36.385  READ DMA
  c8 00 08 01 00 00 b0 00      00:01:35.643  READ DMA
  c6 00 10 00 00 00 b0 00      00:01:35.643  SET MULTIPLE MODE
  10 00 3f 00 00 00 b0 00      00:01:35.643  RECALIBRATE [OBS-4]

Error 97 occurred at disk power-on lifetime: 13962 hours (581 days + 18 
hours)
  When the command that caused the error occurred, the device was active 
or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 01 00 00 b1  Error: ICRC, ABRT at LBA = 0x01000001 = 16777217

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 40 01 00 00 b1 00      00:01:36.385  READ DMA
  c8 00 08 01 00 00 b0 00      00:01:35.643  READ DMA
  c6 00 10 00 00 00 b0 00      00:01:35.643  SET MULTIPLE MODE
  10 00 3f 00 00 00 b0 00      00:01:35.643  RECALIBRATE [OBS-4]
  91 00 3f 3f ff 3b bf 00      00:01:35.643  INITIALIZE DEVICE 
PARAMETERS [OBS-6]