From paul at all-the-johnsons.co.uk Mon Jan 1 14:46:54 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Mon, 01 Jan 2007 14:46:54 +0000 Subject: Mounting USB drives under rawhide Message-ID: <1167662814.22216.6.camel@T7.Linux> Hi, Okay, I give up. I'm running the current rawhide kernel on an x86_64 box and I can't get anything other than the laser printer to be recognised when I hot plug them in. What device name do I need to use to mount them by hand? /dev shows the following usb points /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev2.1_ep00 /dev/usbdev2.1_ep81 /dev/usbdev2.2_ep00 /dev/usbdev2.2_ep01 /dev/usbdev2.2_ep82 /dev/usbdev2.7_ep00 /dev/usbdev2.7_ep02 /dev/usbdev2.7_ep81 /dev/usbdev3.1_ep00 /dev/usbdev3.1_ep81 /dev/usb: lp0 /proc/bus/usb/devices comes up with the following T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2891.fc7 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2891.fc7 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=55aa ProdID=b012 Rev= 1.01 S: Manufacturer= S: Product=8-in-2 S: SerialNumber=D8C1CC9553 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=3004 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=DeskJet 980C S: SerialNumber=ES16B190F0OF C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2891.fc7 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms If I try to mount (say) /dev/usbdev3.1_ep81 I get an error saying it's not a block device. I really need to be able to mount USB devices, so any help would be appreciated. kernel : 2.6.19-1.2891.fc7 TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From drago01 at gmail.com Mon Jan 1 14:53:07 2007 From: drago01 at gmail.com (dragoran) Date: Mon, 01 Jan 2007 15:53:07 +0100 Subject: Mounting USB drives under rawhide In-Reply-To: <1167662814.22216.6.camel@T7.Linux> References: <1167662814.22216.6.camel@T7.Linux> Message-ID: <45992053.5090706@gmail.com> Paul wrote: > Hi, > > Okay, I give up. I'm running the current rawhide kernel on an x86_64 box > and I can't get anything other than the laser printer to be recognised > when I hot plug them in. > > What device name do I need to use to mount them by hand? > > /dev shows the following usb points > > /dev/usbdev1.1_ep00 > /dev/usbdev1.1_ep81 > /dev/usbdev2.1_ep00 > /dev/usbdev2.1_ep81 > /dev/usbdev2.2_ep00 > /dev/usbdev2.2_ep01 > /dev/usbdev2.2_ep82 > /dev/usbdev2.7_ep00 > /dev/usbdev2.7_ep02 > /dev/usbdev2.7_ep81 > /dev/usbdev3.1_ep00 > /dev/usbdev3.1_ep81 > > /dev/usb: > lp0 > > /proc/bus/usb/devices comes up with the following > > > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.19-1.2891.fc7 ehci_hcd > S: Product=EHCI Host Controller > S: SerialNumber=0000:00:02.2 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.19-1.2891.fc7 ohci_hcd > S: Product=OHCI Host Controller > S: SerialNumber=0000:00:02.1 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=55aa ProdID=b012 Rev= 1.01 > S: Manufacturer= > S: Product=8-in-2 > S: SerialNumber=D8C1CC9553 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 7 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=03f0 ProdID=3004 Rev= 1.00 > S: Manufacturer=Hewlett-Packard > S: Product=DeskJet 980C > S: SerialNumber=ES16B190F0OF > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.06 > S: Manufacturer=Linux 2.6.19-1.2891.fc7 ohci_hcd > S: Product=OHCI Host Controller > S: SerialNumber=0000:00:02.0 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > If I try to mount (say) /dev/usbdev3.1_ep81 I get an error saying it's > not a block device. > > I really need to be able to mount USB devices, so any help would be > appreciated. > > kernel : 2.6.19-1.2891.fc7 > > TTFN > > Paul > dmesg output? bug report for automounting not working for you? From paul at all-the-johnsons.co.uk Mon Jan 1 15:18:27 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Mon, 01 Jan 2007 15:18:27 +0000 Subject: Mounting USB drives under rawhide In-Reply-To: <45992053.5090706@gmail.com> References: <1167662814.22216.6.camel@T7.Linux> <45992053.5090706@gmail.com> Message-ID: <1167664707.22216.10.camel@T7.Linux> Hi, > dmesg output? After plugging it in - nothing. I did notice some selinux problems, but that won't be the problem as they didn't mount before re-enabling selinux. > bug report for automounting not working for you? No bug report being generated. TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From cpanceac at gmail.com Mon Jan 1 17:10:28 2007 From: cpanceac at gmail.com (cornel panceac) Date: Mon, 1 Jan 2007 19:10:28 +0200 Subject: Mounting USB drives under rawhide In-Reply-To: <1167664707.22216.10.camel@T7.Linux> References: <1167662814.22216.6.camel@T7.Linux> <45992053.5090706@gmail.com> <1167664707.22216.10.camel@T7.Linux> Message-ID: lsusb? 2007/1/1, Paul : > Hi, > > > dmesg output? > > After plugging it in - nothing. I did notice some selinux problems, but > that won't be the problem as they didn't mount before re-enabling > selinux. > > > bug report for automounting not working for you? > > No bug report being generated. > > TTFN > > Paul > -- > "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer > > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list > > > From paul at all-the-johnsons.co.uk Mon Jan 1 17:17:41 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Mon, 01 Jan 2007 17:17:41 +0000 Subject: Mounting USB drives under rawhide In-Reply-To: References: <1167662814.22216.6.camel@T7.Linux> <45992053.5090706@gmail.com> <1167664707.22216.10.camel@T7.Linux> Message-ID: <1167671861.22216.14.camel@T7.Linux> Hi, On Mon, 2007-01-01 at 19:10 +0200, cornel panceac top-posted: > lsusb? Bus 003 Device 001: ID 0000:0000 Bus 002 Device 007: ID 03f0:3004 Hewlett-Packard Bus 002 Device 002: ID 55aa:b012 OnSpec Electronic, Inc. Mitsumi FA402M 8-in-2 Card Reader Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 The 4 way USB hub is connected as it's currently powering my MP3 player! TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From mbarnes at redhat.com Tue Jan 2 02:49:53 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Mon, 1 Jan 2007 21:49:53 -0500 Subject: Fedora Core 6 Test Update: pygtk2-2.10.3-4.fc6 Message-ID: <200701020249.l022nriB002602@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2006-001 2007-01-01 --------------------------------------------------------------------- Product : Fedora Core 6 Name : pygtk2 Version : 2.10.3 Release : 4.fc6 Summary : Python bindings for GTK+ Description : PyGTK is an extension module for python that gives you access to the GTK+ widget set. Just about anything you can write in C with GTK+ you can write in python with PyGTK (within reason), but with all the benefits of python. --------------------------------------------------------------------- Update Information: This update fixes a minor packaging error in pygtk2. --------------------------------------------------------------------- * Sat Dec 30 2006 Matthew Barnes - 2.10.3-4.fc6 - Add Requires pkgconfig to devel subpackage (RH bug #220692). * Thu Nov 30 2006 Matthew Barnes - 2.10.3-3.fc6 - Add patch for RH bug #217430 (missing gtk-extrafuncs.defs). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ df2e1a8327306c7a446b17d038d1622d45b1e552 SRPMS/pygtk2-2.10.3-4.fc6.src.rpm df2e1a8327306c7a446b17d038d1622d45b1e552 noarch/pygtk2-2.10.3-4.fc6.src.rpm daa759d7c8be94a1349339f52e69e08a1f8757cd ppc/pygtk2-devel-2.10.3-4.fc6.ppc.rpm 900ea534252b6db5cec3e903951495a724abef66 ppc/pygtk2-codegen-2.10.3-4.fc6.ppc.rpm 85005585f4d3839f0de4e129da7c2c2f106538df ppc/debug/pygtk2-debuginfo-2.10.3-4.fc6.ppc.rpm d710d718693d002ee32a2106a211518143182359 ppc/pygtk2-libglade-2.10.3-4.fc6.ppc.rpm 185b4ad137663d57a932547ed65cdeadc66fdc58 ppc/pygtk2-2.10.3-4.fc6.ppc.rpm 80b98ad7ae1f7b0502ceed3f43ed34e9a0abcc4d x86_64/pygtk2-libglade-2.10.3-4.fc6.x86_64.rpm d63a20c630b28d391b4a0fbd9b5c7f94a34c120e x86_64/pygtk2-devel-2.10.3-4.fc6.x86_64.rpm 78e3d120508b3e09f8ebdc126753f29fa45219f6 x86_64/pygtk2-2.10.3-4.fc6.x86_64.rpm 26c55fac55ef868279cf6ce372c54d24a8ec5549 x86_64/pygtk2-codegen-2.10.3-4.fc6.x86_64.rpm 3e71b05d6b0cd4ae5e8d8950bd38b2c4b512e43d x86_64/debug/pygtk2-debuginfo-2.10.3-4.fc6.x86_64.rpm 1d74a2c75b445a60377010dcc9b15adb770cbe32 i386/pygtk2-codegen-2.10.3-4.fc6.i386.rpm 88b1f37d5752fca7fa25a634130af7f7542db38e i386/debug/pygtk2-debuginfo-2.10.3-4.fc6.i386.rpm 63137de1b8aaf3174281b7c61497cc01d4f2e8bc i386/pygtk2-libglade-2.10.3-4.fc6.i386.rpm 44dac1222cafd169c5e6e9596b82aa7a490b2b6b i386/pygtk2-devel-2.10.3-4.fc6.i386.rpm 34f8d9181511ab474aaa9f414c03e7a4a26e5b71 i386/pygtk2-2.10.3-4.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mbarnes at redhat.com Tue Jan 2 02:50:48 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Mon, 1 Jan 2007 21:50:48 -0500 Subject: Fedora Core 5 Test Update: pygtk2-2.8.6-1.fc5 Message-ID: <200701020250.l022omR7002825@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2006-001 2007-01-01 --------------------------------------------------------------------- Product : Fedora Core 5 Name : pygtk2 Version : 2.8.6 Release : 1.fc5 Summary : Python bindings for the GTK+ widget set. Description : PyGTK is an extension module for python that gives you access to the GTK+ widget set. Just about anything you can write in C with GTK+ you can write in python with PyGTK (within reason), but with all the benefits of python. --------------------------------------------------------------------- Update Information: This update fixes a minor packaging error in pygtk2. --------------------------------------------------------------------- * Sat Dec 30 2006 Matthew Barnes - 2.8.6-1.fc5 - Add Requires pkgconfig to devel subpackage (RH bug #220692). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ fd911389f3766ed451ae79e1bd09d31668054c8c SRPMS/pygtk2-2.8.6-1.fc5.src.rpm fd911389f3766ed451ae79e1bd09d31668054c8c noarch/pygtk2-2.8.6-1.fc5.src.rpm 522bacdde3f5c6ff9f6fb10eaaa531115bba46a7 ppc/pygtk2-devel-2.8.6-1.fc5.ppc.rpm f31f0e461c86639156d03318e39680f94eef11e4 ppc/pygtk2-libglade-2.8.6-1.fc5.ppc.rpm d11e9efeb415c16aad1cec1c2ac15731bcb7170b ppc/debug/pygtk2-debuginfo-2.8.6-1.fc5.ppc.rpm 3cc7ac868a737e30f4c69cd01dcce97e27c754c7 ppc/pygtk2-2.8.6-1.fc5.ppc.rpm 71e6060094633d6af952394c42cee6eb7a18ee1d x86_64/pygtk2-libglade-2.8.6-1.fc5.x86_64.rpm c33c7547cfb18c6399dbbc1afe9bdfb41d77c5b6 x86_64/debug/pygtk2-debuginfo-2.8.6-1.fc5.x86_64.rpm 3456f72c0b15b86bc04da9eedd61cc58eff5ca35 x86_64/pygtk2-2.8.6-1.fc5.x86_64.rpm 9de0d78b2d3a27b93ebcb0040bb8ea69607ea331 x86_64/pygtk2-devel-2.8.6-1.fc5.x86_64.rpm 713df8d33a1b548facd0cd40820171a0e143f9ba i386/debug/pygtk2-debuginfo-2.8.6-1.fc5.i386.rpm 3556176c9220716c5178214efaea442031609e5b i386/pygtk2-devel-2.8.6-1.fc5.i386.rpm ddb979d61c8c848f44ee7e210902d728430470d3 i386/pygtk2-libglade-2.8.6-1.fc5.i386.rpm b71f33dc4d17d673ca813b4bed50d746dffcb205 i386/pygtk2-2.8.6-1.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mbarnes at redhat.com Tue Jan 2 02:51:12 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Mon, 1 Jan 2007 21:51:12 -0500 Subject: Fedora Core 6 Test Update: evolution-2.8.2.1-3.fc6 Message-ID: <200701020251.l022pCIv002881@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2006-001 2007-01-01 --------------------------------------------------------------------- Product : Fedora Core 6 Name : evolution Version : 2.8.2.1 Release : 3.fc6 Summary : GNOME's next-generation groupware suite Description : Evolution is the GNOME mailer, calendar, contact manager and communications tool. The tools which make up Evolution will be tightly integrated with one another and act as a seamless personal information-management tool. --------------------------------------------------------------------- Update Information: This update fixes a minor packaging error in evolution. --------------------------------------------------------------------- * Sun Dec 30 2007 Matthew Barnes - 2.8.2.1-3.fc6 - Add Requires evolution-data-server-devel to devel subpackage (RH bug #218889). * Tue Nov 27 2007 Matthew Barnes - 2.8.2.1-2.fc6 - Remove patch for GNOME bug #343331 (fixed upstream). - Require evolution-data-server-1.8.2, since libcamel's API changed. * Tue Nov 21 2006 Matthew Barnes - 2.8.2.1-1.fc6 - Update to 2.8.2.1 * Mon Nov 20 2006 Matthew Barnes - 2.8.2-1.fc6 - Update to 2.8.2 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 227a554766d26927bf472270457c23516621a590 SRPMS/evolution-2.8.2.1-3.fc6.src.rpm 227a554766d26927bf472270457c23516621a590 noarch/evolution-2.8.2.1-3.fc6.src.rpm 2edc6e40af619442edf5538a265d7114f8dba458 ppc/evolution-devel-2.8.2.1-3.fc6.ppc.rpm 99092439cc04260cb3a353bf439507eefe8f2840 ppc/evolution-2.8.2.1-3.fc6.ppc.rpm 5168f518303ccc1121f11d9b30b22aa2dad7dad1 ppc/debug/evolution-debuginfo-2.8.2.1-3.fc6.ppc.rpm 19905f76b1cf4f3f342ffa429ad08fe1dc001ebc x86_64/debug/evolution-debuginfo-2.8.2.1-3.fc6.x86_64.rpm d3a634078c9e0e2f0e93e206ac0e40e732a92e6c x86_64/evolution-devel-2.8.2.1-3.fc6.x86_64.rpm e70b49d35873504968495d9aeb557cfddfea6ec4 x86_64/evolution-2.8.2.1-3.fc6.x86_64.rpm f82c15772c00f7765db9d0b983f599329749df45 i386/evolution-devel-2.8.2.1-3.fc6.i386.rpm 71fbde2f715e05720e5c5a3f07fd38a1249ea75f i386/evolution-2.8.2.1-3.fc6.i386.rpm 7b98afd9c7cd13297c429b0d45491bb9fd0247a1 i386/debug/evolution-debuginfo-2.8.2.1-3.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mbarnes at redhat.com Tue Jan 2 02:52:07 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Mon, 1 Jan 2007 21:52:07 -0500 Subject: Fedora Core 6 Test Update: gnome-python2-2.16.2-2.fc6 Message-ID: <200701020252.l022q7DU002968@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2006-001 2007-01-01 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-python2 Version : 2.16.2 Release : 2.fc6 Summary : The sources for the PyGNOME Python extension module Description : The gnome-python package contains the source packages for the Python bindings for GNOME called PyGNOME. PyGNOME is an extension module for Python that provides access to the base GNOME libraries, so you have access to more widgets, a simple configuration interface, and metadata support. --------------------------------------------------------------------- Update Information: This update fixes some minor packaging errors. --------------------------------------------------------------------- * Fri Nov 17 2006 Matthew Barnes - 2.16.2-2.fc6 - Fix some minor packaging bugs (RH bug #203532). - Bonobo subpackage requires pyorbit >= 2.0.1, not 2.0.l (RH bug #150885). * Sun Nov 5 2006 Matthew Barnes - 2.16.2-1.fc6 - Update to 2.16.2 - Clean up spec file. - Remove unused patches. - Add subpackage gnome-python2-devel (bug #203532). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ ad37e289a6142d1e38bedf86d17e503de86ad5a6 SRPMS/gnome-python2-2.16.2-2.fc6.src.rpm ad37e289a6142d1e38bedf86d17e503de86ad5a6 noarch/gnome-python2-2.16.2-2.fc6.src.rpm a526c3ab46ee1fb4d13c018429cdccf4a6b36217 ppc/gnome-python2-gconf-2.16.2-2.fc6.ppc.rpm c1e91a7d5a52b1f510ec93b0e1aa0890fb06be8c ppc/gnome-python2-devel-2.16.2-2.fc6.ppc.rpm fb7db1edf2b85c4365137c929b49bf7f78ae4328 ppc/gnome-python2-canvas-2.16.2-2.fc6.ppc.rpm 5bb6cda7058af2de463f49f1edee46d623af8264 ppc/gnome-python2-gnomevfs-2.16.2-2.fc6.ppc.rpm 51ac7bdca0de70d99863468e8473d43010789b14 ppc/gnome-python2-2.16.2-2.fc6.ppc.rpm ee3f8d5bc30a336757647b9994bb4aadc96cb4b2 ppc/gnome-python2-bonobo-2.16.2-2.fc6.ppc.rpm e4c74c0c4c249242c720fb28e188bcec517de325 ppc/debug/gnome-python2-debuginfo-2.16.2-2.fc6.ppc.rpm 8ce56b9f71eec3151caa6dbf6f2bdafd6dbe39b7 x86_64/gnome-python2-gnomevfs-2.16.2-2.fc6.x86_64.rpm 6c5f431572b6829aa5359b0abd3d75b07d97212e x86_64/gnome-python2-devel-2.16.2-2.fc6.x86_64.rpm ed45c3ee8ff60afeb5604d75087ee7a2a0e7932c x86_64/gnome-python2-canvas-2.16.2-2.fc6.x86_64.rpm 529e66065f998a17a2eea7ba2a9de1f05fb846c2 x86_64/debug/gnome-python2-debuginfo-2.16.2-2.fc6.x86_64.rpm 0158682491099a9b2d6ea206b067f545cdacea82 x86_64/gnome-python2-bonobo-2.16.2-2.fc6.x86_64.rpm 42e02fd3c43d9df41ecc5ebb76f4232cec82df47 x86_64/gnome-python2-2.16.2-2.fc6.x86_64.rpm 036f4916cd096f6cceeb6dba5c244265fe0a240d x86_64/gnome-python2-gconf-2.16.2-2.fc6.x86_64.rpm 7d3a97f073e2219bcc9836af9a64c98f6026ea96 i386/gnome-python2-gconf-2.16.2-2.fc6.i386.rpm 191bc6d3bb95ae923c5b210e616139569fe0284c i386/gnome-python2-devel-2.16.2-2.fc6.i386.rpm ab8227a16844edf1a9f5ad2a8e5fa47b1d86ef41 i386/gnome-python2-bonobo-2.16.2-2.fc6.i386.rpm 720c4f342d8701d0af0b5a16f4a291897704e5a5 i386/gnome-python2-2.16.2-2.fc6.i386.rpm e1466f072c75cdedbba0539350b252ca88dd165e i386/gnome-python2-canvas-2.16.2-2.fc6.i386.rpm c1a4c5163022e610a2226f04bf8e8535a7abdbbc i386/debug/gnome-python2-debuginfo-2.16.2-2.fc6.i386.rpm f72556fbb01be06832782be999e176aa2ae388c8 i386/gnome-python2-gnomevfs-2.16.2-2.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Tue Jan 2 16:04:27 2007 From: twaugh at redhat.com (Tim Waugh) Date: Tue, 2 Jan 2007 11:04:27 -0500 Subject: Fedora Core 6 Test Update: system-config-printer-0.7.44-1.fc6 Message-ID: <200701021604.l02G4R4F011805@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2006-1420 2007-01-02 --------------------------------------------------------------------- Product : Fedora Core 6 Name : system-config-printer Version : 0.7.44 Release : 1.fc6 Summary : A printer administration tool Description : system-config-printer is a graphical user interface that allows the user to configure a CUPS print server. --------------------------------------------------------------------- Update Information: Bug fix update. --------------------------------------------------------------------- * Tue Jan 2 2007 Tim Waugh 0.7.44-1 - 0.7.44: - Fixed traceback in error display (bug #220136). - Preserve case in model string when dumping debug output. * Thu Dec 21 2006 Tim Waugh 0.7.43-1 - 0.7.43: - Don't check against IEEE 1284 DES field at all. - Merged device matching code (bug #219518). - Catch non-fatal errors when auto-matching device. - Fixed driver checking bug involving pipelines (bug #220347). - Show PPD errors (bug #220136). * Mon Dec 11 2006 Tim Waugh 0.7.42-1 - 0.7.42: - Fixed typo in command set matching code. - Case-insensitive matching when Device ID not known to database. * Thu Dec 7 2006 Tim Waugh 0.7.41-1 - Updated pycups to 1.9.16. - 0.7.41: - Reconnect smoothly after uploading new configuration. - Update lpoptions when setting default printer if it conflicts with the new setting (bug #217395). - Fixed typo in show_HTTP_Error (bug #217537). - Don't pre-select make and model when not discoverable for chosen device (bug #217518). - Set Forward button sensitive on Device screen in new-printer dialog (bug #217515). - Keep Server Settings selected after applying changes if it was selected before. - Set Connecting dialog transient for main window. - Center Connecting dialog on parent. - Optional 'reason' argument for cupshelpers.Printer.setEnabled. - Describe devices that have no optional parameters. * Thu Nov 30 2006 Tim Waugh - Provide pycups feature. * Tue Nov 21 2006 Tim Waugh 0.7.40-1 - 0.7.40: - Removed username:password from hint string because we add that in afterwards. - Don't set button widths in create-printer dialog (bug #217025). * Tue Nov 21 2006 Tim Waugh 0.7.39-1 - 0.7.39: - Busy cursor while loading foomatic and PPD list (bug #215527). - Make PPD NickName selectable. - Added SMB hint label on device screen (bug #212759). * Tue Nov 14 2006 Tim Waugh 0.7.38-1 - Updated pycups to 1.9.15. - 0.7.38: - Fixed a bug in the 'ieee1284'/'ppd-device-id' parsing code. * Mon Nov 13 2006 Tim Waugh 0.7.37-1 - 0.7.37: - Allow cancellation of test pages (bug #215054). * Fri Nov 10 2006 Tim Waugh 0.7.36-1 - 0.7.36: - Match against commandset (bug #214181). - Parse 'ieee1284' foomatic autodetect entries (bug #214761). - Don't remove foomatic PPDs from the list (bug #197331). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 66655e37d321e01c270e26669397f686479f19b9 SRPMS/system-config-printer-0.7.44-1.fc6.src.rpm 66655e37d321e01c270e26669397f686479f19b9 noarch/system-config-printer-0.7.44-1.fc6.src.rpm 7c906d8e88751d3017a1c5a19061bb1cdce1960d ppc/debug/system-config-printer-debuginfo-0.7.44-1.fc6.ppc.rpm 96b1e5e72ffc1304113b4120d8536df8972f312f ppc/system-config-printer-libs-0.7.44-1.fc6.ppc.rpm 861957783f2b936355a1b42249b91f5e9a4d4aed ppc/system-config-printer-0.7.44-1.fc6.ppc.rpm c70bd156e02c4bcdbb34ef0b8b1412739dd0cfb5 x86_64/debug/system-config-printer-debuginfo-0.7.44-1.fc6.x86_64.rpm 7a21f9f06505886b06084c43940f5f8aa692b15e x86_64/system-config-printer-libs-0.7.44-1.fc6.x86_64.rpm 985bdcd04f0524c1893ce68662e36a98e4f3c250 x86_64/system-config-printer-0.7.44-1.fc6.x86_64.rpm 87f9702f46c788d6b838748ae31c2f9aa435e590 i386/system-config-printer-0.7.44-1.fc6.i386.rpm 6c845fb4ac7b2da4056790e944899ceb29b731eb i386/system-config-printer-libs-0.7.44-1.fc6.i386.rpm 96e75337b5804a40da1eeb528e9ceadfe4f64856 i386/debug/system-config-printer-debuginfo-0.7.44-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Tue Jan 2 18:53:59 2007 From: twaugh at redhat.com (Tim Waugh) Date: Tue, 2 Jan 2007 13:53:59 -0500 Subject: Fedora Core 6 Test Update: system-config-printer-0.7.44-1.fc6 Message-ID: <200701021853.l02Irx1c001063@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2006-1420 2007-01-02 --------------------------------------------------------------------- Product : Fedora Core 6 Name : system-config-printer Version : 0.7.44 Release : 1.fc6 Summary : A printer administration tool Description : system-config-printer is a graphical user interface that allows the user to configure a CUPS print server. --------------------------------------------------------------------- Update Information: Bug fix update. --------------------------------------------------------------------- * Tue Jan 2 2007 Tim Waugh 0.7.44-1 - 0.7.44: - Fixed traceback in error display (bug #220136). - Preserve case in model string when dumping debug output. * Thu Dec 21 2006 Tim Waugh 0.7.43-1 - 0.7.43: - Don't check against IEEE 1284 DES field at all. - Merged device matching code (bug #219518). - Catch non-fatal errors when auto-matching device. - Fixed driver checking bug involving pipelines (bug #220347). - Show PPD errors (bug #220136). * Mon Dec 11 2006 Tim Waugh 0.7.42-1 - 0.7.42: - Fixed typo in command set matching code. - Case-insensitive matching when Device ID not known to database. * Thu Dec 7 2006 Tim Waugh 0.7.41-1 - Updated pycups to 1.9.16. - 0.7.41: - Reconnect smoothly after uploading new configuration. - Update lpoptions when setting default printer if it conflicts with the new setting (bug #217395). - Fixed typo in show_HTTP_Error (bug #217537). - Don't pre-select make and model when not discoverable for chosen device (bug #217518). - Set Forward button sensitive on Device screen in new-printer dialog (bug #217515). - Keep Server Settings selected after applying changes if it was selected before. - Set Connecting dialog transient for main window. - Center Connecting dialog on parent. - Optional 'reason' argument for cupshelpers.Printer.setEnabled. - Describe devices that have no optional parameters. * Thu Nov 30 2006 Tim Waugh - Provide pycups feature. * Tue Nov 21 2006 Tim Waugh 0.7.40-1 - 0.7.40: - Removed username:password from hint string because we add that in afterwards. - Don't set button widths in create-printer dialog (bug #217025). * Tue Nov 21 2006 Tim Waugh 0.7.39-1 - 0.7.39: - Busy cursor while loading foomatic and PPD list (bug #215527). - Make PPD NickName selectable. - Added SMB hint label on device screen (bug #212759). * Tue Nov 14 2006 Tim Waugh 0.7.38-1 - Updated pycups to 1.9.15. - 0.7.38: - Fixed a bug in the 'ieee1284'/'ppd-device-id' parsing code. * Mon Nov 13 2006 Tim Waugh 0.7.37-1 - 0.7.37: - Allow cancellation of test pages (bug #215054). * Fri Nov 10 2006 Tim Waugh 0.7.36-1 - 0.7.36: - Match against commandset (bug #214181). - Parse 'ieee1284' foomatic autodetect entries (bug #214761). - Don't remove foomatic PPDs from the list (bug #197331). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ f3e8b68c98daff167e1d3866570821737a7d9eba SRPMS/system-config-printer-0.7.44-1.fc6.src.rpm f3e8b68c98daff167e1d3866570821737a7d9eba noarch/system-config-printer-0.7.44-1.fc6.src.rpm 003cbbe70d33cfdd6dfb89a54b532373f3e13a3b ppc/debug/system-config-printer-debuginfo-0.7.44-1.fc6.ppc.rpm 3a70ec15a8679a53669e57ccc37a6ad48793cadc ppc/system-config-printer-libs-0.7.44-1.fc6.ppc.rpm 317bad3b630b16b3d7f49547a6886b0f3615e9a8 ppc/system-config-printer-0.7.44-1.fc6.ppc.rpm 1be563c709dc7674f5b7b97cbe4c7635555c08dc x86_64/debug/system-config-printer-debuginfo-0.7.44-1.fc6.x86_64.rpm 8c8c5e3dcd335f79833ea79ab5d49afcb84e5d06 x86_64/system-config-printer-libs-0.7.44-1.fc6.x86_64.rpm 31447175defa68eb258350917f6131b14fe4850e x86_64/system-config-printer-0.7.44-1.fc6.x86_64.rpm 061d5275c5ada637598b68fc14a9516de94b76de i386/system-config-printer-0.7.44-1.fc6.i386.rpm ab1ef669e8a43d73fcd55ae2d1ca017e89523624 i386/system-config-printer-libs-0.7.44-1.fc6.i386.rpm dac5b14b07aefcdfe915a4ec67036c31a3f6a2d4 i386/debug/system-config-printer-debuginfo-0.7.44-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From cra at WPI.EDU Tue Jan 2 19:01:37 2007 From: cra at WPI.EDU (Chuck Anderson) Date: Tue, 2 Jan 2007 14:01:37 -0500 Subject: virt-manager memory leak? Message-ID: <20070102190137.GA3822@angus.ind.WPI.EDU> Has anyone noticed a memory leak in virt-manager? I have an FC6 host with an FC6 guest, running virt-manager with graphical and serial consoles on the guest. I left this running since Dec 27 and when I got back today the virt-manager python process was using 1.3 Gig resident RAM. From tjb at unh.edu Tue Jan 2 19:52:02 2007 From: tjb at unh.edu (Thomas J. Baker) Date: Tue, 02 Jan 2007 14:52:02 -0500 Subject: Fedora Core 6 Test Update: evolution-2.8.2.1-3.fc6 In-Reply-To: <200701020251.l022pCIv002881@int-mx1.corp.redhat.com> References: <200701020251.l022pCIv002881@int-mx1.corp.redhat.com> Message-ID: <1167767522.15224.9.camel@raptor.sr.unh.edu> On Mon, 2007-01-01 at 21:51 -0500, Matthew Barnes wrote: > --------------------------------------------------------------------- > Fedora Test Update Notification > FEDORA-2006-001 > 2007-01-01 > --------------------------------------------------------------------- > > Product : Fedora Core 6 > Name : evolution > Version : 2.8.2.1 > Release : 3.fc6 > Summary : GNOME's next-generation groupware suite > Description : > Evolution is the GNOME mailer, calendar, contact manager and > communications tool. The tools which make up Evolution will > be tightly integrated with one another and act as a seamless > personal information-management tool. > > --------------------------------------------------------------------- > Update Information: > > This update fixes a minor packaging error in evolution. > --------------------------------------------------------------------- > * Sun Dec 30 2007 Matthew Barnes - 2.8.2.1-3.fc6 > - Add Requires evolution-data-server-devel to devel subpackage > (RH bug #218889). > * Tue Nov 27 2007 Matthew Barnes - 2.8.2.1-2.fc6 > - Remove patch for GNOME bug #343331 (fixed upstream). > - Require evolution-data-server-1.8.2, since libcamel's API changed. > * Tue Nov 21 2006 Matthew Barnes - 2.8.2.1-1.fc6 > - Update to 2.8.2.1 > * Mon Nov 20 2006 Matthew Barnes - 2.8.2-1.fc6 > - Update to 2.8.2 > > --------------------------------------------------------------------- > This update can be downloaded from: > http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ > Although the changelog doesn't give any indication why, this version of evolution seems to stop checking all my IMAP folders for new mail after a random amount of time. (I use procmail server side filtering.) I'll click on a mailbox and it will suddenly show new messages that weren't indicated until I clicked it. I check every minute so it's easy to tell things aren't right when the new mail is from an hour ago. I just updated this morning. I'm running FC6/i386 and evolution on the client and the IMAP server is FC6/X86_64 running dovecot. Bugzilla is absolutely glacial at the moment. My search for evolution bugs has been churning for 5 minutes. I'll reply later with a bugzilla number unless someone already has one. tjb -- ======================================================================= | Thomas Baker email: tjb at unh.edu | | Systems Programmer | | Research Computing Center voice: (603) 862-4490 | | University of New Hampshire fax: (603) 862-1761 | | 332 Morse Hall | | Durham, NH 03824 USA http://wintermute.sr.unh.edu/~tjb | ======================================================================= From mbarnes at redhat.com Tue Jan 2 21:49:58 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Tue, 2 Jan 2007 16:49:58 -0500 Subject: Fedora Core 6 Test Update: python-numeric-24.2-1.fc6 Message-ID: <200701022149.l02LnwuE022580@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2006-004 2007-01-02 --------------------------------------------------------------------- Product : Fedora Core 6 Name : python-numeric Version : 24.2 Release : 1.fc6 Summary : Numerical Extension to Python Description : Numeric is a python module that provides support for numerical operations. --------------------------------------------------------------------- Update Information: Update to Numeric 24.2 and fix a hang when using the eigenvalues() function. --------------------------------------------------------------------- * Tue Jan 2 2007 Matthew Barnes - 24.2-1.fc6 - Update to 24.2 - Add patch for RH bug #163646 (hang in eigenvalues). - Remove Numeric-23.7-blasfix.patch (obsolete). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 863cd084115660256a5f2d9512133f71b3d6d0d0 SRPMS/python-numeric-24.2-1.fc6.src.rpm 863cd084115660256a5f2d9512133f71b3d6d0d0 noarch/python-numeric-24.2-1.fc6.src.rpm d849f66219821cca0aaa5f86b51cf1876adb8acb ppc/python-numeric-24.2-1.fc6.ppc.rpm 059f6bfea9b7d6eba679d621a907ed114c3dbc6f ppc/debug/python-numeric-debuginfo-24.2-1.fc6.ppc.rpm 043351f2def9377b5c725fce47a9ccbe9f75d18b x86_64/debug/python-numeric-debuginfo-24.2-1.fc6.x86_64.rpm f16d0cda4bcca68c009e0e0c80e47c0b8ca7ac23 x86_64/python-numeric-24.2-1.fc6.x86_64.rpm a5b580deb37e69f96c274a28de045555ebb3908c i386/debug/python-numeric-debuginfo-24.2-1.fc6.i386.rpm bfefe21763b11d12249b4c3431a39b53ae3fd1e1 i386/python-numeric-24.2-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From berrange at redhat.com Wed Jan 3 00:56:53 2007 From: berrange at redhat.com (Daniel P. Berrange) Date: Wed, 3 Jan 2007 00:56:53 +0000 Subject: virt-manager memory leak? In-Reply-To: <20070102190137.GA3822@angus.ind.WPI.EDU> References: <20070102190137.GA3822@angus.ind.WPI.EDU> Message-ID: <20070103005653.GA3260@redhat.com> On Tue, Jan 02, 2007 at 02:01:37PM -0500, Chuck Anderson wrote: > Has anyone noticed a memory leak in virt-manager? I have an FC6 host > with an FC6 guest, running virt-manager with graphical and serial > consoles on the guest. I left this running since Dec 27 and when I > got back today the virt-manager python process was using 1.3 Gig > resident RAM. Yes, there was a memory leak in one API call in libvirt, but I believe the latest Fedora errata should have already fixed them. What RPM versions of libvirt & virt-manager have you got installed ? Regards, Dan -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=| From pmatilai at laiskiainen.org Wed Jan 3 08:29:01 2007 From: pmatilai at laiskiainen.org (Panu Matilainen) Date: Wed, 3 Jan 2007 10:29:01 +0200 (EET) Subject: Are My RPM/Yum Seg-Faults Due to the Kernel FIle Corruption? In-Reply-To: <20061224173222.6345f02c.paul@permanentmail.com> References: <20061224091653.b394ccd9.paul@permanentmail.com> <20061224091939.2157e69b.paul@permanentmail.com> <1166980723.3281.1400.camel@laptopd505.fenrus.org> <20061224173222.6345f02c.paul@permanentmail.com> Message-ID: On Sun, 24 Dec 2006, Paul Dickson wrote: > On Sun, 24 Dec 2006 18:18:43 +0100, Arjan van de Ven wrote: > >> the bug wasn't seen prior to 2.6.19 so I doubt what you see is related >> to it... > > In the note about 2.6.20-rc2 says its been there since at least 2.6.18.3. Yup, and it certainly affects at least apt-rpm in current Fedora 5 & 6 kernels. I've seen a bunch of crash reports (and managed to reproduce it a few times myself) which all are caused by zeroes in apt's cachefile where data is expected... In the cases I managed to reproduce it, no rpmdb corruption was present, just apt's own cachefile. But as rpm uses mmap it's at least *possible* some of the rpm issues people see in FC6 are caused by it. - Panu - From cra at WPI.EDU Wed Jan 3 15:01:57 2007 From: cra at WPI.EDU (Chuck Anderson) Date: Wed, 3 Jan 2007 10:01:57 -0500 Subject: virt-manager memory leak? In-Reply-To: <20070103005653.GA3260@redhat.com> References: <20070102190137.GA3822@angus.ind.WPI.EDU> <20070103005653.GA3260@redhat.com> Message-ID: <20070103150157.GB18280@angus.ind.WPI.EDU> On Wed, Jan 03, 2007 at 12:56:53AM +0000, Daniel P. Berrange wrote: > On Tue, Jan 02, 2007 at 02:01:37PM -0500, Chuck Anderson wrote: > > Has anyone noticed a memory leak in virt-manager? I have an FC6 host > > with an FC6 guest, running virt-manager with graphical and serial > > consoles on the guest. I left this running since Dec 27 and when I > > got back today the virt-manager python process was using 1.3 Gig > > resident RAM. > > Yes, there was a memory leak in one API call in libvirt, but I believe > the latest Fedora errata should have already fixed them. What RPM > versions of libvirt & virt-manager have you got installed ? virt-manager-0.2.6-3.fc6 libvirt-0.1.10-1.fc6 From berrange at redhat.com Wed Jan 3 16:24:12 2007 From: berrange at redhat.com (Daniel P. Berrange) Date: Wed, 3 Jan 2007 16:24:12 +0000 Subject: virt-manager memory leak? In-Reply-To: <20070103150157.GB18280@angus.ind.WPI.EDU> References: <20070102190137.GA3822@angus.ind.WPI.EDU> <20070103005653.GA3260@redhat.com> <20070103150157.GB18280@angus.ind.WPI.EDU> Message-ID: <20070103162412.GH3067@redhat.com> On Wed, Jan 03, 2007 at 10:01:57AM -0500, Chuck Anderson wrote: > On Wed, Jan 03, 2007 at 12:56:53AM +0000, Daniel P. Berrange wrote: > > On Tue, Jan 02, 2007 at 02:01:37PM -0500, Chuck Anderson wrote: > > > Has anyone noticed a memory leak in virt-manager? I have an FC6 host > > > with an FC6 guest, running virt-manager with graphical and serial > > > consoles on the guest. I left this running since Dec 27 and when I > > > got back today the virt-manager python process was using 1.3 Gig > > > resident RAM. > > > > Yes, there was a memory leak in one API call in libvirt, but I believe > > the latest Fedora errata should have already fixed them. What RPM > > versions of libvirt & virt-manager have you got installed ? > > virt-manager-0.2.6-3.fc6 > libvirt-0.1.10-1.fc6 Ok, those are the latest releases, so could you file a bugzilla ticket about the problem. Regards, Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=| From buildsys at redhat.com Wed Jan 3 19:08:51 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Wed, 3 Jan 2007 14:08:51 -0500 Subject: rawhide report: 20060103 changes Message-ID: <200701031908.l03J8pY2014867@hs20-bc2-6.build.redhat.com> Updated Packages: aspell-12:0.60.5-1.fc7 ---------------------- * Tue Jan 02 2007 Ivana Varekova - 12:0.60.5-1 - update to 0.60.4 - cleanup spec file * Wed Nov 08 2006 Ivana Varekova - 12:0.60.4-1 - update to 0.60.4 * Wed Jul 12 2006 Jesse Keating - 12:0.60.3-7.1 - rebuild autofs-1:5.0.1-0.rc2.41 ----------------------- * Wed Dec 27 2006 Ian Kent - 5.0.1-0.rc2.41 - fix nonstrict multi-mount handling (bz 219383). - correct detection of duplicate indirect mount entries (bz 220799). cyrus-sasl-2.1.22-5 ------------------- * Tue Dec 05 2006 Nalin Dahyabhai 2.1.22-5 - rebuild - add 'authentication' or 'auxprop' to summaries for plugin packages to better indicate what the plugin provides - switch from automake 1.9 to automake 1.7 dev86-0.16.17-4.fc7 ------------------- * Wed Dec 27 2006 Jindrich Novy - 0.16.17-4 - bcc now searches in correct path for bcc-cpp on x86_64 (#219697) * Tue Dec 05 2006 Jindrich Novy - 0.16.17-3 - make the dev86 spec less tragic -> use macros, don't conflict on multiarches, add URL, fix BuildRoot, fix rpmlint warnings eclipse-cdt-1:3.1.1-6.fc7 ------------------------- * Mon Dec 11 2006 Jeff Johnstont 3.1.1-6 - Rebase autotools to 0.0.6 source. evolution-2.9.4-4.fc7 --------------------- * Sat Dec 30 2006 Matthew Barnes - 2.9.4-4.fc7 - Add Requires evolution-data-server-devel to devel subpackage (RH bug #218889). * Thu Dec 21 2006 Matthew Barnes - 2.9.4-3.fc7 - Add patch for RH bug #218898 (viewing message source). * Wed Dec 20 2006 Matthew Barnes - 2.9.4-2.fc7 - Revise patch for RH bug #202751 (printing of indic languages). fbset-2.1-23 ------------ * Tue Jan 02 2007 David Woodhouse - 2.1-23 - Fix man page syntax error gcc-4.1.1-49 ------------ * Tue Jan 02 2007 Jakub Jelinek 4.1.1-49 - update from gcc-4_1-branch (-r120062:120325) - PRs debug/26964, fortran/30200, libfortran/30145 - fix endless recursion in negate_expr/fold_unary (PR middle-end/30286) - fix cpp problem on empty source files (Tom Tromey, PR preprocessor/30001) - improve constructor disambiguation (Mark Mitchell, PR c++/28261, PR c++/29535) - fix handling of non-NULL attribute on nested functions (Andrew Pinski, PR tree-opt/30045) - fix ICE with friend templatized static member function (PR c++/29054) gdb-6.5-22.fc7 -------------- * Sat Dec 30 2006 Jan Kratochvil - 6.5-22 - Fix unwinding crash on older gcj(1) code (extended CFI support) (BZ 165025). - Include testcase for the readline history of input mode commands (BZ 215816). gnome-pilot-conduits-2.0.15-3.fc7 --------------------------------- * Sat Dec 30 2006 Matthew Barnes - 2.0.15-3.fc7 - Remove Prereq: /sbin/install-info (RH bug #220520). gnome-python2-2.16.2-5.fc7 -------------------------- * Sun Dec 31 2006 Matthew Barnes - 2.16.2-5 - Bonobo subpackage requires pyorbit >= 2.0.1, not 2.0.l (RH bug #150885). hal-cups-utils-0.6.3-1.fc7 -------------------------- * Tue Jan 02 2007 Tim Waugh 0.6.3-1 - 0.6.3: - Put PPD NickName in info line instead of just 'Added by HAL'. - Don't add/remove new printer if one already exists with a matching URI. * Sun Dec 17 2006 Tim Waugh - Use 'hp:' URIs when appropriate (bug #175555). - Added syslogging to hal_lpadmin. kernel-2.6.19-1.2904.fc7 ------------------------ * Mon Jan 01 2007 Dave Jones - 2.6.20rc3 * Mon Jan 01 2007 David Woodhouse - Fix fallout from half-baked upstream IBM vSCSI patch * Mon Jan 01 2007 David Woodhouse - Fix BUG() in assembler in PowerPC - Fix Maple IDE IRQ m17n-db-1.3.3-44.fc7 -------------------- * Tue Jan 02 2007 Mayank Jain - Resolves: Bug 221122: [hi_IN-remington] vowels in hi-remington are not typed correctly net-tools-1.60-75.fc7 --------------------- * Wed Dec 27 2006 Radek Vok??l - 1.60-76 - fix arp unaligned access (#220438) netpbm-10.35-9.fc7 ------------------ * Thu Dec 28 2006 Jindrich Novy 10.35-9 - pbmtog3 won't segfault on 64bit arches (#220739) * Tue Dec 19 2006 Jindrich Novy 10.35-8 - remove bogus man pages (#220112, #220113) - overflow2() no more conflicts with libgd.so (#216116) - fix BuildRoot * Thu Oct 12 2006 Jindrich Novy 10.35-7 - remove note about OSL 1 licensing from COPYRIGHT.PATENT file policycoreutils-1.33.6-9.fc7 ---------------------------- * Tue Jan 02 2007 Dan Walsh 1.33.6-9 - Fix fixfiles script to use tty command correctly. If this command fails, it should set the LOGFILE to /dev/null Resolves: #220879 psacct-6.3.2-42.fc7 ------------------- * Tue Jan 02 2007 Ivana Varekova - 6.3.2-42 - Resolves: 221069 (fix lastcomm man page) - spec file cleanup pygtk2-2.10.3-7.fc7 ------------------- * Sat Dec 30 2006 Matthew Barnes - 2.10.3-7.fc7 - Add Requires pkgconfig to devel subpackage. scim-bridge-0.4.9-1.fc7 ----------------------- * Tue Jan 02 2007 Jens Petersen - 0.4.9-1 - update to 0.4.9 - fixes hanging agent processes (#210772) - fixes movement of preedit with clicking (#217329) - no longer need scim-bridge-0.4.8-qt-moc-path.patch and scim-bridge-0.4.8-tests-dir-missing.patch - protect update-gtk-immodules in %post and %postun selinux-policy-2.4.6-21.fc7 --------------------------- * Mon Jan 29 2007 Dan Walsh 2.4.6-21 - Allow spamassassin to read var_lib_t dir Resolves: #219234 * Fri Dec 29 2006 Dan Walsh 2.4.6-20 - fix mplayer to work under strict policy - Allow iptables to use nscd Resolves: #220794 * Thu Dec 28 2006 Dan Walsh 2.4.6-19 - Add gconf policy and make it work with strict system-config-printer-0.7.45-1.fc7 ---------------------------------- * Wed Jan 03 2007 Tim Waugh 0.7.45-1 - Updated to pycups-1.9.17. - 0.7.45: - Fixed traceback in driver check. * Tue Jan 02 2007 Tim Waugh 0.7.44-1 - 0.7.44: - Fixed traceback in error display (bug #220136). - Preserve case in model string when dumping debug output. tar-2:1.15.1-24.fc7 ------------------- * Wed Jan 03 2007 Peter Vrabec 2:1.15.1-24 - supply tar man page (#219375) uucp-1.07-13.fc7 ---------------- * Wed Jan 03 2007 Peter Vrabec 1.07-13 - spec file improvements (#220534) vixie-cron-4:4.1-68.fc7 ----------------------- * Thu Dec 14 2006 Dan Walsh - 4:4.1-68 - Patch to run vixie-cron with mls correctly Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From twaugh at redhat.com Wed Jan 3 20:30:03 2007 From: twaugh at redhat.com (Tim Waugh) Date: Wed, 3 Jan 2007 15:30:03 -0500 Subject: Fedora Core 6 Test Update: system-config-printer-0.7.45-1.fc6 Message-ID: <200701032030.l03KU39r025027@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-1420 2007-01-03 --------------------------------------------------------------------- Product : Fedora Core 6 Name : system-config-printer Version : 0.7.45 Release : 1.fc6 Summary : A printer administration tool Description : system-config-printer is a graphical user interface that allows the user to configure a CUPS print server. --------------------------------------------------------------------- Update Information: Bug fix update. --------------------------------------------------------------------- * Wed Jan 3 2007 Tim Waugh 0.7.45-1 - Updated to pycups-1.9.17. - 0.7.45: - Fixed traceback in driver check. * Tue Jan 2 2007 Tim Waugh 0.7.44-1 - 0.7.44: - Fixed traceback in error display (bug #220136). - Preserve case in model string when dumping debug output. * Thu Dec 21 2006 Tim Waugh 0.7.43-1 - 0.7.43: - Don't check against IEEE 1284 DES field at all. - Merged device matching code (bug #219518). - Catch non-fatal errors when auto-matching device. - Fixed driver checking bug involving pipelines (bug #220347). - Show PPD errors (bug #220136). * Mon Dec 11 2006 Tim Waugh 0.7.42-1 - 0.7.42: - Fixed typo in command set matching code. - Case-insensitive matching when Device ID not known to database. * Thu Dec 7 2006 Tim Waugh 0.7.41-1 - Updated pycups to 1.9.16. - 0.7.41: - Reconnect smoothly after uploading new configuration. - Update lpoptions when setting default printer if it conflicts with the new setting (bug #217395). - Fixed typo in show_HTTP_Error (bug #217537). - Don't pre-select make and model when not discoverable for chosen device (bug #217518). - Set Forward button sensitive on Device screen in new-printer dialog (bug #217515). - Keep Server Settings selected after applying changes if it was selected before. - Set Connecting dialog transient for main window. - Center Connecting dialog on parent. - Optional 'reason' argument for cupshelpers.Printer.setEnabled. - Describe devices that have no optional parameters. * Thu Nov 30 2006 Tim Waugh - Provide pycups feature. * Tue Nov 21 2006 Tim Waugh 0.7.40-1 - 0.7.40: - Removed username:password from hint string because we add that in afterwards. - Don't set button widths in create-printer dialog (bug #217025). * Tue Nov 21 2006 Tim Waugh 0.7.39-1 - 0.7.39: - Busy cursor while loading foomatic and PPD list (bug #215527). - Make PPD NickName selectable. - Added SMB hint label on device screen (bug #212759). * Tue Nov 14 2006 Tim Waugh 0.7.38-1 - Updated pycups to 1.9.15. - 0.7.38: - Fixed a bug in the 'ieee1284'/'ppd-device-id' parsing code. * Mon Nov 13 2006 Tim Waugh 0.7.37-1 - 0.7.37: - Allow cancellation of test pages (bug #215054). * Fri Nov 10 2006 Tim Waugh 0.7.36-1 - 0.7.36: - Match against commandset (bug #214181). - Parse 'ieee1284' foomatic autodetect entries (bug #214761). - Don't remove foomatic PPDs from the list (bug #197331). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 4ecd6b7752a655e2c32bdd69a18e1b57bb8037ab SRPMS/system-config-printer-0.7.45-1.fc6.src.rpm 4ecd6b7752a655e2c32bdd69a18e1b57bb8037ab noarch/system-config-printer-0.7.45-1.fc6.src.rpm a692d1206ae0f559140ef6fc35415554f3723a8d ppc/debug/system-config-printer-debuginfo-0.7.45-1.fc6.ppc.rpm 170c3bcb562ae0ef9f44199fd94a640e1085b974 ppc/system-config-printer-0.7.45-1.fc6.ppc.rpm cdf83e511dbfba452123c7727149747421481ea8 ppc/system-config-printer-libs-0.7.45-1.fc6.ppc.rpm c9155a9c6a2ca31651eee5f6543022f9415eb782 x86_64/system-config-printer-libs-0.7.45-1.fc6.x86_64.rpm 5344f9a64fa3a6ee7f9d614c1e0e83f2189a5a35 x86_64/system-config-printer-0.7.45-1.fc6.x86_64.rpm 148fb284ac877400311f32fde0fe7a5ba5a6fd5a x86_64/debug/system-config-printer-debuginfo-0.7.45-1.fc6.x86_64.rpm 988335191be068753f51ead8f4a4d0f9383f72cc i386/system-config-printer-0.7.45-1.fc6.i386.rpm 3bbe203ad3bf6f4e20d55ee5395325e6bbb539aa i386/system-config-printer-libs-0.7.45-1.fc6.i386.rpm edbb4d62e6623430eaaf034d841b0b596853c813 i386/debug/system-config-printer-debuginfo-0.7.45-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From katzj at redhat.com Wed Jan 3 20:56:28 2007 From: katzj at redhat.com (Jeremy Katz) Date: Wed, 3 Jan 2007 15:56:28 -0500 Subject: Fedora Core 6 Test Update: yum-3.0.2-1.fc6 Message-ID: <200701032056.l03KuSoR032742@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-006 2007-01-03 --------------------------------------------------------------------- Product : Fedora Core 6 Name : yum Version : 3.0.2 Release : 1.fc6 Summary : RPM installer/updater Description : Yum is a utility that can check for and automatically download and install updated RPM packages. Dependencies are obtained and downloaded automatically prompting the user as necessary. --------------------------------------------------------------------- Update Information: This update fixes a number of bugs in yum. --------------------------------------------------------------------- * Wed Jan 3 2007 Jeremy Katz - 3.0.2-1 - update to 3.0.2 with lots of fixes * Fri Nov 10 2006 Jeremy Katz - 3.0.1-2 - yum-updatesd fixes (#213622, #212494, #212507) * Fri Nov 3 2006 Jeremy Katz - 3.0.1-1 - update to 3.0.1 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 12fb2401d25b002ac68d2b4111d85825372528a6 SRPMS/yum-3.0.2-1.fc6.src.rpm 12fb2401d25b002ac68d2b4111d85825372528a6 noarch/yum-3.0.2-1.fc6.src.rpm 1269e5f9699ede68a91c79950d8fae5bb70a8059 ppc/yum-updatesd-3.0.2-1.fc6.noarch.rpm 2585c3939e8594f64ecccab11af52efa23cd55c3 ppc/yum-3.0.2-1.fc6.noarch.rpm 1269e5f9699ede68a91c79950d8fae5bb70a8059 x86_64/yum-updatesd-3.0.2-1.fc6.noarch.rpm 2585c3939e8594f64ecccab11af52efa23cd55c3 x86_64/yum-3.0.2-1.fc6.noarch.rpm 1269e5f9699ede68a91c79950d8fae5bb70a8059 i386/yum-updatesd-3.0.2-1.fc6.noarch.rpm 2585c3939e8594f64ecccab11af52efa23cd55c3 i386/yum-3.0.2-1.fc6.noarch.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Thu Jan 4 17:32:09 2007 From: twaugh at redhat.com (Tim Waugh) Date: Thu, 4 Jan 2007 12:32:09 -0500 Subject: Fedora Core 6 Test Update: hal-cups-utils-0.6.4-1.fc6 Message-ID: <200701041732.l04HW9DP032296@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-007 2007-01-04 --------------------------------------------------------------------- Product : Fedora Core 6 Name : hal-cups-utils Version : 0.6.4 Release : 1.fc6 Summary : Halified CUPS utilities Description : Halified utilities for CUPS: - hal_lpadmin - hal CUPS backend --------------------------------------------------------------------- Update Information: Bug fix update. --------------------------------------------------------------------- * Thu Jan 4 2007 Tim Waugh 0.6.4-1 - 0.6.4: - Don't enable/disable existing printers. * Tue Jan 2 2007 Tim Waugh 0.6.3-1 - 0.6.3: - Applied all patches. - Added syslogging. - Use 'hp:' URIs when appropriate (bug #175555). - Put PPD NickName in info line instead of just 'Added by HAL'. - Don't add/remove new printer if one already exists with a matching URI. * Thu Nov 9 2006 Tim Waugh - 0.6.2-4.2 - IEEE 1284 Device ID in CUPS backend (bug #214755). * Wed Nov 8 2006 Tim Waugh - 0.6.2-4.1 - Use printer.commandset when matching printers (bug #214180). - Fixed HAL printer interface API name (bug #214598). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 038d8b1a6b044646d262eeb88dbee8ea6ee16cae SRPMS/hal-cups-utils-0.6.4-1.fc6.src.rpm 038d8b1a6b044646d262eeb88dbee8ea6ee16cae noarch/hal-cups-utils-0.6.4-1.fc6.src.rpm d74e018e731c68ffdb8f63d178743f23109e33a1 ppc/debug/hal-cups-utils-debuginfo-0.6.4-1.fc6.ppc.rpm a23e6cc50492677610824177a310e0f585fa50c3 ppc/hal-cups-utils-0.6.4-1.fc6.ppc.rpm 485d571450fe333b748dcd34d7cb8a3e4b7b31a3 x86_64/hal-cups-utils-0.6.4-1.fc6.x86_64.rpm 83fe76fd37e66f7336d28a4b5ccc7608c98d9868 x86_64/debug/hal-cups-utils-debuginfo-0.6.4-1.fc6.x86_64.rpm 991d264399fd1e16823b72cd4f88347b7caf3c94 i386/hal-cups-utils-0.6.4-1.fc6.i386.rpm 6085ce47fd7ba9b81cfaeb8da43af259dfcb0c1f i386/debug/hal-cups-utils-debuginfo-0.6.4-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From buildsys at redhat.com Thu Jan 4 20:08:27 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Thu, 4 Jan 2007 15:08:27 -0500 Subject: rawhide report: 20070104 changes Message-ID: <200701042008.l04K8Ron030833@hs20-bc2-6.build.redhat.com> Updated Packages: Pyrex-0:0.9.4-4.fc7 ------------------- * Wed Jan 03 2007 David Zeuthen - 0:0.9.4-4.fc7 - include a patch so Pyrex works with python 2.5 dbus-python-0.70-9.fc7 ---------------------- * Wed Jan 03 2007 David Zeuthen - 0.70-9.fc7 - rebuild against new Pyrex dogtail-0.6.1-1.fc7 ------------------- * Wed Jan 03 2007 Zack Cerza - 0.6.1-1 - New upstream release. evolution-sharp-0.12.1-1.fc7 ---------------------------- * Wed Jan 03 2007 Matthew Barnes - 0.12.1-1.fc7 - Update to 0.12.1 - Remove evolution-sharp-0.11.1-evo210.patch (fixed upstream). - Mono files now live in /usr/lib rather than /usr/lib. fonts-indic-2.0.12-1.fc7 ------------------------ * Thu Jan 04 2007 Parag Nemade - 2.0.12-1 - Resolves: RH#220881 for [ta_IN], RH#220882 for [hi_IN] (Parag Nemade) * Thu Jan 04 2007 Parag Nemade - 2.0.11-1 - Resolves: RH#216639 and RH#217482 for [kn_IN] (Parag Nemade) - Resolves: RH#219583 for [pa_IN] (Parag Nemade) - Resolves: RH#218588 for [gu_IN] (Parag Nemade) * Wed Dec 06 2006 Parag Nemade - 2.0.10-1 - Resolved Bugs from Parag Nemade - Resolves: bug 207269 for [ta_IN],bug 217482 for [kn_IN],bug 216628 for [ml_IN],bug 218588 for [gu_IN],bug 206599 for [te_IN] - Resolved Bugs from LingNing Zhang - Resolves: Bug 218586,bug 218587 for [ml_IN] gcc-4.1.1-50 ------------ * Wed Jan 03 2007 Jakub Jelinek 4.1.1-50 - backwards compatibility with old layout of struct _Unwind_Context (#220627) - fix preprocessor defines in assembly preprocessed with -std=... (Steven Bosscher, PR c/25993) - fix PCH creation with templates (Jason Merrill, PR c++/28217) - fix dwarf2out ICE (Alexandre Oliva, #217529, PR debug/30189) pam-0.99.6.2-7.fc7 ------------------ * Fri Dec 01 2006 Dan Walsh 0.99.6.2-7 - Fix selection of role * Fri Dec 01 2006 Dan Walsh 0.99.6.2-6 - Fix pam_namespace to only change MLS componant Resolves: Bug #216184 * Thu Nov 30 2006 Tomas Mraz 0.99.6.2-5 - add select-context option to pam_selinux (#213812) - autoreconf won't work with autoconf-2.61 as configure.in is not yet adjusted for it python-2.5-7.fc7 ---------------- * Wed Jan 03 2007 Jeremy Katz - 2.5.3-7 - fix ctypes to not require execstack (#220669) Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From davej at redhat.com Fri Jan 5 00:18:31 2007 From: davej at redhat.com (Dave Jones) Date: Thu, 4 Jan 2007 19:18:31 -0500 Subject: patches for pata disks on sata promise controller In-Reply-To: <459D86C2.4080006@jbsys.com> References: <459D86C2.4080006@jbsys.com> Message-ID: <20070105001831.GF17816@redhat.com> On Thu, Jan 04, 2007 at 03:59:14PM -0700, James C. Bevier wrote: > Since the 2.4 kernel, I have had to patch sata_promise.c and libata.c to > recognize pata disks. When the kernel was updated to 2.6.19, all of the > patches were discarded. The 2.6.19 rebase is incomplete. This is why it isn't in updates-testing yet. Pretty much all the stuff that had conflicts get commented out for the time being. > Why were these patches not integrated upstream > over the last two years? I'll leave Jeff to answer that one. I know I'm tired of carrying it too. > Now the code has been redesigned by someone > (Jeff?) and the patches invalidated. Here is a first pass at the > patches for the 2.6.19 and beyond kernels. Dave, could you review the > patch and incorporate them into the next kernel rev? They seem to work > for me, but they needed to be tested with a system that has sata disks > to make sure I did not screw them up. Here is the patch and the diffs > for the spec file. Jeff, care to eyeball this? (Same diff James sent, but with some indentation fixes) Thanks, Dave This will update the following files: drivers/scsi/libata-core.c include/linux/libata.h drivers/scsi/sata_promise.c through these ChangeSets: o [libata sata_promise] support PATA ports on SATA controllers diff -Nru a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c --- a/drivers/ata/libata-core.c 2006-12-27 13:57:22.000000000 -0700 +++ b/drivers/ata/libata-core.c 2006-12-27 12:24:36.000000000 -0700 @@ -5626,6 +5629,7 @@ ap->mwdma_mask = ent->mwdma_mask; ap->udma_mask = ent->udma_mask; ap->flags |= ent->port_flags; + ap->flags |= ent->pata_flags[port_no]; /* pata fix */ ap->ops = ent->port_ops; } ap->hw_sata_spd_limit = UINT_MAX; @@ -5804,6 +5808,9 @@ int irq_line = ent->irq; ap = ata_port_add(ent, host, i); + ap->flags |= ent->pata_flags[i]; /* pata fix */ + ata_port_printk(ap, KERN_INFO, " ata_dev_add port %u found\n", i); /* pata fix */ + host->ports[i] = ap; if (!ap) goto err_out; @@ -5832,6 +5839,7 @@ (ap->pio_mask << ATA_SHIFT_PIO); /* print per-port info to dmesg */ +ata_port_printk(ap, KERN_INFO, " ata_dev_add port flags 0x%lX\n", ap->flags); /* pata fix */ ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " "ctl 0x%lX bmdma 0x%lX irq %d\n", ap->flags & ATA_FLAG_SATA ? 'S' : 'P', diff -Nru a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c --- a/drivers/ata/sata_promise.c 2006-12-27 12:32:27.000000000 -0700 +++ b/drivers/ata/sata_promise.c 2006-12-27 14:15:06.000000000 -0700 @@ -102,6 +102,8 @@ static int pdc_port_start(struct ata_port *ap); static void pdc_port_stop(struct ata_port *ap); static void pdc_pata_phy_reset(struct ata_port *ap); +static void pdc_sata_phy_reset(struct ata_port *ap); /* pata fix */ +static void pdc_phy_reset(struct ata_port *ap); /* pata fix */ static void pdc_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); @@ -140,6 +142,8 @@ .exec_command = pdc_exec_command_mmio, .dev_select = ata_std_dev_select, + .phy_reset = pdc_phy_reset, /* pata fix */ + .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue_prot, .freeze = pdc_freeze, @@ -165,7 +169,8 @@ .exec_command = pdc_exec_command_mmio, .dev_select = ata_std_dev_select, - .phy_reset = pdc_pata_phy_reset, +/* .phy_reset = pdc_pata_phy_reset, */ /* pata fix */ + .phy_reset = pdc_phy_reset, /* pata fix */ .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue_prot, @@ -183,7 +188,7 @@ /* board_2037x */ { .sht = &pdc_ata_sht, - .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS /* | ATA_FLAG_SATA */, /* pata fix */ .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -353,6 +358,22 @@ readl(mmio); /* flush */ } +static void pdc_phy_reset(struct ata_port *ap) /* pata fix */ +{ /* pata fix */ + /* if no sata flag, test for pata drive */ /* pata fix */ + if (ap->flags & ATA_FLAG_SATA) /* pata fix */ + pdc_sata_phy_reset(ap); /* pata fix */ + else /* pata fix */ + pdc_pata_phy_reset(ap); /* pata fix */ +} + +static void pdc_sata_phy_reset(struct ata_port *ap) /* pata fix */ +{ /* pata fix */ + /* if no sata flag, test for pata drive */ /* pata fix */ + pdc_reset_port(ap); /* pata fix */ + sata_phy_reset(ap); /* pata fix */ +} + static void pdc_pata_cbl_detect(struct ata_port *ap) { u8 tmp; @@ -369,6 +390,12 @@ static void pdc_pata_phy_reset(struct ata_port *ap) { + u8 tmp; /* pata fix */ + void *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03; /* pata fix */ + tmp = readb(mmio); /* pata fix */ + if (tmp & 0x01) /* pata fix */ + ap->udma_mask &= ATA_UDMA_MASK_40C; /* pata fix */ + pdc_pata_cbl_detect(ap); pdc_reset_port(ap); ata_port_probe(ap); @@ -740,6 +767,7 @@ unsigned int board_idx = (unsigned int) ent->driver_data; int pci_dev_busy = 0; int rc; + u8 tmp; /* pata fix */ if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -802,6 +830,8 @@ probe_ent->port[0].scr_addr = base + 0x400; probe_ent->port[1].scr_addr = base + 0x500; + //printk(KERN_INFO DRV_NAME " looking for PATA port\n"); /* pata fix */ + dev_printk(KERN_INFO, &pdev->dev, "looking for PATA ports\n"); /* notice 4-port boards */ switch (board_idx) { case board_40518: @@ -820,7 +850,27 @@ hp->flags |= PDC_FLAG_GEN_II; /* Fall through */ case board_2037x: - probe_ent->n_ports = 2; +/* probe_ent->n_ports = 2; */ /* pata fix */ + /* the first two ports are always SATA */ /* pata fix */ + probe_ent->pata_flags[0] = ATA_FLAG_SATA; /* pata fix */ + probe_ent->pata_flags[1] = ATA_FLAG_SATA; /* pata fix */ + + /* Some boards also have PATA ports */ /* pata fix */ + tmp = readb(mmio_base + PDC_FLASH_CTL+1); /* pata fix */ + if (!(tmp & 0x80)) /* pata fix */ + { /* pata fix */ + probe_ent->n_ports = 3; /* pata fix */ + pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); /* pata fix */ + probe_ent->pata_flags[2] = ATA_FLAG_SLAVE_POSS; /* pata fix */ +// printk(KERN_INFO DRV_NAME " PATA port found\n"); /* pata fix */ + dev_printk(KERN_INFO, &pdev->dev, "PATA port found\n"); + } /* pata fix */ + else /* pata fix */ + { +// printk(KERN_INFO DRV_NAME " PATA port not found\n"); /* pata fix */ + dev_printk(KERN_INFO, &pdev->dev, "PATA port not found\n"); + probe_ent->n_ports = 2; /* pata fix */ + } break; case board_20619: probe_ent->n_ports = 4; diff -Nru a/include/linux/libata.h b/include/linux/libata.h --- a/include/linux/libata.h 2006-12-27 13:58:14.000000000 -0700 +++ b/include/linux/libata.h 2006-12-27 12:12:57.000000000 -0700 @@ -383,6 +383,7 @@ unsigned long irq2; unsigned int irq_flags; unsigned long port_flags; + unsigned long pata_flags[ATA_MAX_PORTS]; /* pata fix */ unsigned long _host_flags; void __iomem *mmio_base; void *private_data; -- http://www.codemonkey.org.uk From buildsys at redhat.com Fri Jan 5 11:24:39 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Fri, 5 Jan 2007 06:24:39 -0500 Subject: rawhide report: 20070105 changes Message-ID: <200701051124.l05BOdUa022439@hs20-bc2-6.build.redhat.com> Updated Packages: bind-31:9.3.3-2.fc7 ------------------- * Thu Jan 04 2007 Martin Stransky - 31:9.3.3-2 - added namedGetForwarders written in shell (#176100), created by Baris Cicek . booty-0.82-1 ------------ * Thu Jan 04 2007 Peter Jones - 0.82-1 - Include drives for /boot and stage1 in device.map (#218453) - Use the right drive list from isys (#217434) findutils-1:4.2.29-2 -------------------- * Fri Jan 05 2007 Miloslav Trmac - 1:4.2.29-2 - Ignore install-info errors in scriptlets fonts-sinhala-0.2.2-1.fc7 ------------------------- * Thu Jan 04 2007 Parag Nemade - 0.2.2-1 - Resolves: RH#206001 (Parag Nemade) gcc-4.1.1-51 ------------ * Thu Jan 04 2007 Jakub Jelinek 4.1.1-51 - bootstrap Ada on ppc32 (David Woodhouse) - fix complex division with -std=c99 or -std=gnu99 (PR c/30360) gimp-help-2-0.1.0.11.fc7 ------------------------ * Thu Jan 04 2007 Nils Philippsen - 2-0.1.0.11 - version 2-0.11 - add disttag glib2-2.12.7-1.fc7 ------------------ * Thu Jan 04 2007 Matthias Clasen - 2.12.7-1 - Update to 2.12.7 - Fix bit-test on x86-64 hal-cups-utils-0.6.4-1.fc7 -------------------------- * Thu Jan 04 2007 Tim Waugh 0.6.4-1 - 0.6.4: - Don't enable/disable existing printers. jwhois-3.2.3-9 -------------- * Fri Jan 05 2007 Miloslav Trmac - 3.2.3-9 - Ignore install-info errors in scriptlets - Remove the trailing dot from Summary: libselinux-1.33.3-1.fc7 ----------------------- * Thu Jan 04 2007 Dan Walsh - 1.33.3-1 - Upgrade to upstream * Merged patch for matchpathcon utility to use file mode information when available from Dan Walsh. mc-1:4.6.1a-39.fc7 ------------------ * Thu Jan 04 2007 Jindrich Novy 4.6.1a-39 - update to new CVS snapshot (fixes #220828) - update bindings again mlocate-0.15-2 -------------- * Fri Jan 05 2007 Miloslav Trmac - 0.15-2 - Add gfs and gfs2 to PRUNEFS Resolves: #220491 system-config-securitylevel-1.6.31-1.fc7 ---------------------------------------- * Thu Jan 04 2007 Chris Lumens 1.6.31-1 - Fix import that was causing a traceback (#221402). uucp-1.07-14.fc7 ---------------- * Thu Jan 04 2007 Peter Vrabec 1.07-14 - spec file improvements (#220534) Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From paul at all-the-johnsons.co.uk Fri Jan 5 15:36:55 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Fri, 05 Jan 2007 15:36:55 +0000 Subject: USB problems and CD mounting problems - what package should I BZ? Message-ID: <1168011415.3840.11.camel@T7.Linux> Hi, Running on rawhide here (x86_64). I can't mount a USB device at all. USB is working (it's powering a bluetooth dongle, Palm P3 and my MP3 player), but nothing is auto-mounting. The only thing of note in dmesg is Linux version 2.6.19-1.2904.fc7 usb 2-1: new full speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice libusual: modprobe for usb-storage succeeded, but module is not present usb 2-3: new full speed USB device using ohci_hcd and address 3 usb 2-3: device descriptor read/64, error -62 usb 2-3: device descriptor read/64, error -62 usb 2-3: new full speed USB device using ohci_hcd and address 4 usb 2-3: device descriptor read/64, error -62 usb 2-3: device descriptor read/64, error -62 usb 2-3: new full speed USB device using ohci_hcd and address 5 usb 2-3: device not accepting address 5, error -62 usb 2-3: new full speed USB device using ohci_hcd and address 6 usb 2-3: device not accepting address 6, error -62 usb 2-4: new full speed USB device using ohci_hcd and address 7 usb 2-4: configuration #1 chosen from 1 choice usb 1-4: new low speed USB device using ohci_hcd and address 2 usb 1-4: device descriptor read/64, error -62 usb 1-4: device descriptor read/64, error -62 usb 1-4: new low speed USB device using ohci_hcd and address 3 usb 1-4: device descriptor read/64, error -62 usb 1-4: device descriptor read/64, error -62 usb 1-4: new low speed USB device using ohci_hcd and address 4 usb 1-4: device not accepting address 4, error -62 usb 1-4: new low speed USB device using ohci_hcd and address 5 (lots of error -62s). If I put a CD or DVD into any of my drives, they too are not automounting - I can mount them from the command line though. If I double click on the icon in nautilus, it fails to mount then as well. Do I need to file both of these problems under hal or the kernel or indeed, some other package? lsusb shows Bus 003 Device 001: ID 0000:0000 Bus 002 Device 007: ID 03f0:3004 Hewlett-Packard Bus 002 Device 002: ID 55aa:b012 OnSpec Electronic, Inc. Mitsumi FA402M 8-in-2 Card Reader Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 (the 8 in 2 is off the main board, the HP is connected at the back of the machine as are the other devices not shown) lspci shows 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4) 02:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) 02:07.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03) 02:07.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port 02:08.0 SCSI storage controller: Adaptec AHA-7850 (rev 03) 02:09.0 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 04) 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0b.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) and finally /proc/bus/usb/devices shows T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2904.fc7 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2904.fc7 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=55aa ProdID=b012 Rev= 1.01 S: Manufacturer= S: Product=8-in-2 S: SerialNumber=D8C1CC9553 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=3004 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=DeskJet 980C S: SerialNumber=ES16B190F0OF C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.19-1.2904.fc7 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms Any help would be appreciated as I could do with being able to use by pen drives in the rawhide box! TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From michal at harddata.com Fri Jan 5 16:36:52 2007 From: michal at harddata.com (Michal Jaegermann) Date: Fri, 5 Jan 2007 09:36:52 -0700 Subject: USB problems and CD mounting problems - what package should I BZ? In-Reply-To: <1168011415.3840.11.camel@T7.Linux> References: <1168011415.3840.11.camel@T7.Linux> Message-ID: <20070105163652.GA26730@mail.harddata.com> On Fri, Jan 05, 2007 at 03:36:55PM +0000, Paul wrote: > > I can't mount a USB device at all. USB is working (it's powering a ^^^^^^ > bluetooth dongle, Palm P3 and my MP3 player), but nothing is > auto-mounting. .... > > If I put a CD or DVD into any of my drives, they too are not > automounting - I can mount them from the command line though. ^^^^^^ ..... > If I double click on the icon in nautilus, it fails to mount then > as well. Any useful output if you will try to use 'gnome-mount' directly from a command prompt? That's what you trying to do by double clicking but not much to see then. Pay attention to what 'gnome-mount --help' has to say. > > Do I need to file both of these problems under hal or the kernel or > indeed, some other package? It appears from what you write that kernel is doing its job. What precisely fails is not obvious from your description. I guess that you can always complain here about 'gnome-mount'. Likely attach an 'lshal' output to your report. Michal From mitr at redhat.com Fri Jan 5 17:00:53 2007 From: mitr at redhat.com (Miloslav Trmac) Date: Fri, 5 Jan 2007 12:00:53 -0500 Subject: Fedora Core 6 Test Update: m4-1.4.5-4 Message-ID: <200701051700.l05H0rWi015746@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-012 2007-01-05 --------------------------------------------------------------------- Product : Fedora Core 6 Name : m4 Version : 1.4.5 Release : 4 Summary : The GNU macro processor. Description : A GNU implementation of the traditional UNIX macro processor. M4 is useful for writing text files which can be logically parsed, and is used by many programs as part of their build process. M4 has built-in functions for including files, running shell commands, doing arithmetic, etc. The autoconf program needs m4 for generating configure scripts, but not for running configure scripts. Install m4 if you need a macro processor. --------------------------------------------------------------------- Update Information: If no regressions are reported, this will be pushed to final around Jan 12. --------------------------------------------------------------------- * Fri Jan 5 2007 Miloslav Trmac - 1.4.5-4 - Backport regexp substitution fixes from m4-1.4.6 Resolves: #221024 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 3b274d544f48aec4c5f5c396ee0763088acc2396 SRPMS/m4-1.4.5-4.src.rpm 3b274d544f48aec4c5f5c396ee0763088acc2396 noarch/m4-1.4.5-4.src.rpm f033e854e0f127959bc9f1a232a453c45cbd5ff1 ppc/m4-1.4.5-4.ppc.rpm 0dd0c6974064232e7e743eb520d2339189518be1 ppc/debug/m4-debuginfo-1.4.5-4.ppc.rpm 83c4bf4ec73c68214e5e82cc9219d7ba21eec1f7 x86_64/m4-1.4.5-4.x86_64.rpm 96cc14fdbc3afd9640d9202a22926cd3f9e3c626 x86_64/debug/m4-debuginfo-1.4.5-4.x86_64.rpm c6e19fa24bf3753c868b68519ebff00b3705ef57 i386/debug/m4-debuginfo-1.4.5-4.i386.rpm daa2bb4d3220b53666b2a9a6f2d416b712fc25cb i386/m4-1.4.5-4.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From paul at all-the-johnsons.co.uk Fri Jan 5 17:28:17 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Fri, 05 Jan 2007 17:28:17 +0000 Subject: USB problems and CD mounting problems - what package should I BZ? In-Reply-To: <20070105163652.GA26730@mail.harddata.com> References: <1168011415.3840.11.camel@T7.Linux> <20070105163652.GA26730@mail.harddata.com> Message-ID: <1168018097.3840.19.camel@T7.Linux> Hi, > Any useful output if you will try to use 'gnome-mount' directly > from a command prompt? That's what you trying to do by double > clicking but not much to see then. Pay attention to what > 'gnome-mount --help' has to say. gnome-mount (gnome-mount:13309) Bonobo-CRITICAl **: bonobo_object_unref: assertion `BONOBO_IS_OBJECT (object)' failed Hmm, bonobo doesn't seem to have been updated for rawhide according to rpm -qa libbonobo... > > Do I need to file both of these problems under hal or the kernel or > > indeed, some other package? > > It appears from what you write that kernel is doing its job. What > precisely fails is not obvious from your description. I guess that > you can always complain here about 'gnome-mount'. Likely attach > an 'lshal' output to your report. I'll try a recompile on bonobo and see if that sorts anything and then file the bug. Thanks :-) TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From michal at harddata.com Fri Jan 5 17:42:59 2007 From: michal at harddata.com (Michal Jaegermann) Date: Fri, 5 Jan 2007 10:42:59 -0700 Subject: USB problems and CD mounting problems - what package should I BZ? In-Reply-To: <1168018097.3840.19.camel@T7.Linux> References: <1168011415.3840.11.camel@T7.Linux> <20070105163652.GA26730@mail.harddata.com> <1168018097.3840.19.camel@T7.Linux> Message-ID: <20070105174259.GA29021@mail.harddata.com> On Fri, Jan 05, 2007 at 05:28:17PM +0000, Paul wrote: > > Any useful output if you will try to use 'gnome-mount' directly > > from a command prompt? That's what you trying to do by double > > clicking but not much to see then. Pay attention to what > > 'gnome-mount --help' has to say. > > gnome-mount I wrote 'gnome-mount --help' for a reason. > (gnome-mount:13309) Bonobo-CRITICAl **: bonobo_object_unref: assertion > `BONOBO_IS_OBJECT (object)' failed This shows up for a long time and was mentioned on other occasions. For example: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=207715 It is still there so apparently this is not so "critical". Shrug! > I'll try a recompile on bonobo and see if that sorts anything and then > file the bug. I would be a bit surprised if that would change anything. Michal From paul at all-the-johnsons.co.uk Fri Jan 5 18:25:08 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Fri, 05 Jan 2007 18:25:08 +0000 Subject: USB problems and CD mounting problems - what package should I BZ? In-Reply-To: <20070105174259.GA29021@mail.harddata.com> References: <1168011415.3840.11.camel@T7.Linux> <20070105163652.GA26730@mail.harddata.com> <1168018097.3840.19.camel@T7.Linux> <20070105174259.GA29021@mail.harddata.com> Message-ID: <1168021508.3840.23.camel@T7.Linux> Hi, > > gnome-mount > > I wrote 'gnome-mount --help' for a reason. > > > (gnome-mount:13309) Bonobo-CRITICAl **: bonobo_object_unref: assertion > > `BONOBO_IS_OBJECT (object)' failed This happened if I issued gnome-mount by itself, with -h (use hal). I get the same error (different number after the colon) if I try and mount anything listed in lshal. > > I'll try a recompile on bonobo and see if that sorts anything and then > > file the bug. > > I would be a bit surprised if that would change anything. It didn't. TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From twaugh at redhat.com Fri Jan 5 19:47:18 2007 From: twaugh at redhat.com (Tim Waugh) Date: Fri, 5 Jan 2007 14:47:18 -0500 Subject: Fedora Core 6 Test Update: foomatic-3.0.2-39.3.fc6 Message-ID: <200701051947.l05JlI2Y004468@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-1375 2007-01-05 --------------------------------------------------------------------- Product : Fedora Core 6 Name : foomatic Version : 3.0.2 Release : 39.3.fc6 Summary : Foomatic printer database. Description : Foomatic is a comprehensive, spooler-independent database of printers, printer drivers, and driver descriptions. It contains utilities to generate driver description files and printer queues for CUPS, LPD, LPRng, and PDQ using the database. There is also the possibility to read the PJL options out of PJL-capable laser printers and take them into account at the driver description file generation. There are spooler-independent command line interfaces to manipulate queues (foomatic-configure) and to print files/manipulate jobs (foomatic printjob). The site http://www.linuxprinting.org/ is based on this database. --------------------------------------------------------------------- Update Information: Database update. --------------------------------------------------------------------- * Fri Jan 5 2007 Tim Waugh 3.0.2-39.3 - Updated db to 3.0-20070105 (bug #214037, bug #191661, bug #198999, bug #191504, bug #187387, bug #188762, bug #170373, bug #221121, bug #214801). * Fri Dec 1 2006 Tim Waugh 3.0.2-39.2 - Updated db to 3.0-20061130. * Fri Nov 10 2006 Tim Waugh 3.0.2-39.1 - Updated db-engine to 3.0-20061109 (bug #197331). * Tue Nov 7 2006 Tim Waugh 3.0.2-38.2 - Clean up gimp-print-ijs/gutenprint recommended drivers. - Updated db-hpijs to 20061031. * Fri Nov 3 2006 Tim Waugh 3.0.2-38.1 - Updated db-engine to 3.0-20061031. - Updated db to 3.0-20061031. - Remove references to foo2zjs and foo2oak (bug #208851). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 44868a2e9de0e9bb21a05b287c9917ec2e0c989a SRPMS/foomatic-3.0.2-39.3.fc6.src.rpm 44868a2e9de0e9bb21a05b287c9917ec2e0c989a noarch/foomatic-3.0.2-39.3.fc6.src.rpm de2fd31889209be37703f1bb9952c94c855f5c06 ppc/foomatic-3.0.2-39.3.fc6.ppc.rpm 5ae8c2a79cce5cdbd538d1e35e073212da70e313 ppc/debug/foomatic-debuginfo-3.0.2-39.3.fc6.ppc.rpm 1227eec1c1d5e703c882a81cae281cc93979ba3e x86_64/debug/foomatic-debuginfo-3.0.2-39.3.fc6.x86_64.rpm e94abc93d99d656ea60dd45edbc0c96fc217c20a x86_64/foomatic-3.0.2-39.3.fc6.x86_64.rpm 4162bee4fc4a0ac2a63b5f77b927c7f4116701d9 i386/foomatic-3.0.2-39.3.fc6.i386.rpm 68a2b9bbbc09b83b158c00f4c579009805ecafeb i386/debug/foomatic-debuginfo-3.0.2-39.3.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From dtimms at iinet.net.au Sat Jan 6 06:30:21 2007 From: dtimms at iinet.net.au (David Timms) Date: Sat, 06 Jan 2007 17:30:21 +1100 Subject: Difference between a test update and a release of same Message-ID: <459F41FD.7010106@iinet.net.au> Hi, if I am testing a particular update say dvd+rw-tools, if the test package is pushed into updates, are the rpm's identical ? Or are they identical before they are signed for each repository {updates, updates-testing} ? I ask to confirm whether or not when the final update is released, will I get it through yum, or will it be the identical EVR and hence not need installing ? {Although the --info of the package would say it is -testing package.} If yum will get the update version, I guess that would mean a double download ? DaveT. From wwoods at redhat.com Sat Jan 6 06:58:48 2007 From: wwoods at redhat.com (Will Woods) Date: Sat, 6 Jan 2007 01:58:48 -0500 Subject: Fedora QA Meeting, 1600UTC Wed Jan. 10, 2007 Message-ID: <4766D92F-17DB-4317-9CC1-01C52F5637FD@redhat.com> Hi! Your friendly neighborhood QA test lead here, letting you know that we will have a meeting for the Fedora QA team at 1600UTC (1100am EST) on Wed, Jan 10, 2007. I'll post a meeting agenda to the wiki soon at this address: http://fedoraproject.org/wiki/QA/Meetings/20070110 But here's the wrinkle - new year, new channels! We will switch the fedora tester discussion over to fedora-qa-list (for email) and this upcoming meeting will be held in #fedora-qa on freenode. To repeat: fedora-triage and fedora-test will be merged into fedora- qa real soon. Please start using #fedora-qa for all tester business on IRC, and Real Soon Now we will establish the new fedora-qa- list at redhat.com email list. Okay? Okay! Respond here if there's any questions or comments. If there's anything you want added to the agenda, add it on the wiki page or email here. Thanks! -w From sundaram at fedoraproject.org Sat Jan 6 08:53:03 2007 From: sundaram at fedoraproject.org (Rahul Sundaram) Date: Sat, 06 Jan 2007 14:23:03 +0530 Subject: Difference between a test update and a release of same In-Reply-To: <459F41FD.7010106@iinet.net.au> References: <459F41FD.7010106@iinet.net.au> Message-ID: <459F636F.6070207@fedoraproject.org> David Timms wrote: > Hi, if I am testing a particular update say dvd+rw-tools, if the test > package is pushed into updates, are the rpm's identical ? > > Or are they identical before they are signed for each repository > {updates, updates-testing} ? Yes. > > I ask to confirm whether or not when the final update is released, will > I get it through yum, or will it be the identical EVR and hence not need > installing ? Yes. Thats right. {Although the --info of the package would say it is > -testing package.} Yum info and list comamnds would actually say its installed. Only when a package is not installed does it show you the repository information. > > If yum will get the update version, I guess that would mean a double > download ? That shouldnt happen. Rahul From buildsys at redhat.com Sat Jan 6 11:26:20 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sat, 6 Jan 2007 06:26:20 -0500 Subject: rawhide report: 20070106 changes Message-ID: <200701061126.l06BQKq6029123@hs20-bc2-6.build.redhat.com> Updated Packages: cpuspeed-1:1.2.1-1.47.fc7 ------------------------- * Fri Jan 05 2007 Jarod Wilson - Fix status and condrestart for centrino/powernow-k8 (#219926) - Give feedback when loading/unloading a cpufreq governor - Rework config file and initscript to make it much easier for end-users to adjust frequency scaling setup - Log start/stop events with useful info - Don't start on xen kernels (freq scaling not supported) cvs-1.11.22-8.fc7 ----------------- * Fri Jan 05 2007 Jindrich Novy -1.11.22-8 - fix post/preun scriptlets so that they won't fail with docs disabled * Fri Dec 01 2006 Jindrich Novy - 1.11.22-7 - remove/replace obsolete rpm tags, fix rpmlint errors evolution-sharp-0.12.1-2.fc7 ---------------------------- * Fri Jan 05 2007 Matthew Barnes - 0.12.1-2.fc7 - Add patch for RH bug #221555 (wrong install directory). - Fix location of mono files to conform to packaging guidelines. foomatic-3.0.2-43.fc7 --------------------- * Fri Jan 05 2007 Tim Waugh 3.0.2-43 - Updated db to 3.0-20070105 (bug #214037, bug #191661, bug #198999, bug #191504, bug #187387, bug #188762, bug #170373, bug #221121, bug #214801). gcc-4.1.1-52 ------------ * Fri Jan 05 2007 Jakub Jelinek 4.1.1-52 - update from gcc-4_1-branch (-r120325:120507) - PRs c++/30382, middle-end/27826, middle-end/28116, tree-optimization/30212 gtk2-2.10.7-1.fc7 ----------------- * Thu Dec 21 2006 Matthias Clasen - 2.10.4-9 - Make gdk_pixbuf_loader_close() idempotent - Always emit the closed signal when the loader is closed * Thu Dec 21 2006 Matthias Clasen - 2.10.6-8 - Make update scripts handle slight variations in $host * Sat Dec 09 2006 Matthias Clasen - 2.10.6-7 - Fix error handling in pixbuf loaders (#218755) - Fix clipping of mnemonic underlines (#218615) - Give accessible names to message dialogs (#215472) - Fix a crash in the handling of invalid icon themes (#218247) - Make the print dialog work when the 'BrowseShortNames Off' cups option is used (#217220) jwhois-3.2.3-10 --------------- * Sat Jan 06 2007 Miloslav Trmac - 3.2.3-10 - Add automatic redirection for .com and .net domains (patch by Wolfgang Rupprecht ) Resolves: #221668 - Update to upstream config as of Jan 6 2007 kexec-tools-1.101-56.fc7 ------------------------ * Thu Jan 04 2007 Neil Horman - 1.101-56.fc7 - Fix option parsing problem for bzImage files (bz 221272) * Fri Dec 15 2006 Neil Horman - 1.101-55.fc7 - Wholesale update of RHEL5 revisions 55-147 * Tue Aug 29 2006 Neil Horman - 1.101-54.fc7 - integrate default elf format patch libICE-1.0.3-1.fc7 ------------------ * Fri Jan 05 2007 Adam Jackson 1.0.3-1 - Update to 1.0.3 libXScrnSaver-1.1.2-1.fc7 ------------------------- * Fri Jan 05 2007 Adam Jackson 1.1.2-1 - Update to 1.1.2 libXau-1.0.3-1.fc7 ------------------ * Fri Jan 05 2007 Adam Jackson 1.0.3-1 - Update to 1.0.3 libXfont-1.2.6-1.fc7 -------------------- * Fri Jan 05 2007 Adam Jackson 1.2.6-1 - Update to 1.2.6 libXfontcache-1.0.4-1.fc7 ------------------------- * Fri Jan 05 2007 Adam Jackson 1.0.4-1 - Update to 1.0.4 libXft-2.1.12-1.fc7 ------------------- * Fri Jan 05 2007 Adam Jackson 2.1.12-1.fc7 - Update to 2.1.12 libXv-1.0.3-1.fc7 ----------------- * Fri Jan 05 2007 Adam Jackson 1.0.3-1 - Update to 1.0.3 libXvMC-1.0.4-1.fc7 ------------------- * Fri Jan 05 2007 Adam Jackson 1.0.4-1 - Update to 1.0.4 libfontenc-1.0.4-1.fc7 ---------------------- * Fri Jan 05 2007 Adam Jackson 1.0.4-1 - Update to 1.0.4 libselinux-1.33.3-2.fc7 ----------------------- * Fri Jan 05 2007 Dan Walsh - 1.33.3-2 - Add securetty handling Resolves: #200110 logrotate-3.7.4-8.fc7 --------------------- * Fri Jan 05 2007 Peter Vrabec 3.7.4-8 - "size" option was ignored in config files (#221341) logwatch-7.3.2-2.fc7 -------------------- * Fri Jan 05 2007 Ivana Varekova 7.3.2-2 - Resolves: 221576 add html conf files * Thu Dec 21 2006 Ivana Varekova 7.3.2-1 - update to 7.3.2 - remove obsolete patches openoffice.org-1:2.1.0-6.10 --------------------------- * Wed Jan 03 2007 Caolan McNamara - 1:2.1.0-6.10 - Resolves: rhbz#216094 add workspace.impress115.patch * Wed Dec 20 2006 Caolan McNamara - 1:2.1.0-6.9 - still need openoffice.org-2.1.0.gccXXXXX.basegfx.crash.patch for rh#199870# - experiment and drop -fno-threadsafe-statics * Mon Dec 18 2006 Caolan McNamara - 1:2.1.0-6.8 - rename and appropiately merge commited patches as their respective workspaces - drop rh200118.filter.xalanbroken.patch - try and drop + openoffice.org-2.0.3.gccXXXXX.basegfx.crash.patch + openoffice.org-2.0.4.gccXXXXX.svtools.fsstorage.patch policycoreutils-1.33.8-1.fc7 ---------------------------- * Fri Jan 05 2007 Dan Walsh 1.33.8-2 - Stop newrole -l from working on non secure ttys Resolves: #200110 * Thu Jan 04 2007 Dan Walsh 1.33.8-1 - Update to upstream * Merged patches from Dan Walsh to: - omit the optional name from audit2allow - use the installed python version in the Makefiles - re-open the tty with O_RDWR in newrole * Wed Jan 03 2007 Dan Walsh 1.33.7-1 - Update to upstream * Patch from Dan Walsh to correctly suppress warnings in load_policy. screen-4.0.3-2.fc7 ------------------ * Fri Jan 05 2007 Marcela Maslanova - 4.0.3-2 - rebuilt (change in spec file) texi2html-1.76-6.fc7 -------------------- * Fri Jan 05 2007 Jindrich Novy 1.76-6 - fix post/preun scriptlets so that they won't fail with docs disabled (thanks to Ville Skytt??) * Wed Nov 29 2006 Jindrich Novy 1.76-5 - replace PreReq, fix BuildRoot xorg-x11-drv-fbdev-0.3.1-1.fc7 ------------------------------ * Fri Jan 05 2007 Adam Jackson 0.3.1-1 - Update to 0.3.1 xorg-x11-drv-mga-1.4.6.1-1.fc7 ------------------------------ * Fri Jan 05 2007 Adam Jackson 1.4.6.1-1 - Update to 1.4.6.1 xorg-x11-drv-nv-1.2.2.1-1.fc7 ----------------------------- * Fri Jan 05 2007 Adam Jackson 1.2.2.1-1 - Update to 1.2.2.1 xorg-x11-drv-rendition-4.1.3-1.fc7 ---------------------------------- * Fri Jan 05 2007 Adam Jackson 4.1.3-1 - Update to 4.1.3 xorg-x11-drv-vmware-10.14.1-1.fc7 --------------------------------- * Fri Jan 05 2007 Adam Jackson 10.14.1-1.fc7 - Update to 10.14.1 xorg-x11-proto-devel-7.1-11.fc7 ------------------------------- * Fri Jan 05 2007 Adam Jackson 7.1-11 - xproto 7.0.10 xorg-x11-util-macros-1.1.5-1.fc7 -------------------------------- * Fri Jan 05 2007 Adam Jackson 1.1.5-1 - Update to 1.1.5 xorg-x11-xauth-1:1.0.2-1.fc7 ---------------------------- * Fri Jan 05 2007 Adam Jackson 1:1.0.2-1.fc7 - Update to 1.0.2 xorg-x11-xdm-1:1.1.3-1.fc7 -------------------------- * Fri Jan 05 2007 Adam Jackson 1:1.1.3-1 - Update to 1.1.3 xorg-x11-xtrans-devel-1.0.3-1.fc7 --------------------------------- * Fri Jan 05 2007 Adam Jackson 1.0.3-1 - Update to 1.0.3 Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From romal at gmx.de Sat Jan 6 16:33:38 2007 From: romal at gmx.de (Robert M. Albrecht) Date: Sat, 06 Jan 2007 17:33:38 +0100 Subject: system-config-display crashing Message-ID: <459FCF62.6070101@gmx.de> Hi, is somebody else seeing this ? I`m quite sure I used it this week, so the crash must have appeared in the last few days. Running Rawhide with todays updates. cu romal [root at helios ~]# system-config-display *** glibc detected *** python2: free(): invalid pointer: 0x097b1b30 *** ======= Backtrace: ========= /lib/libc.so.6[0x941ffd] /lib/libc.so.6(cfree+0x90)[0x945650] /usr/lib/python2.5/site-packages/ixf86configmodule.so[0x67cdc1] /usr/lib/python2.5/site-packages/ixf86configmodule.so[0x67e43c] /usr/lib/python2.5/site-packages/ixf86configmodule.so[0x67cda1] /usr/lib/python2.5/site-packages/ixf86configmodule.so[0x67d25c] /usr/lib/libpython2.5.so.1.0(PyEval_EvalFrameEx+0x13dc)[0x4a0d3c] /usr/lib/libpython2.5.so.1.0(PyEval_EvalFrameEx+0x63cf)[0x4a5d2f] /usr/lib/libpython2.5.so.1.0(PyEval_EvalFrameEx+0x63cf)[0x4a5d2f] /usr/lib/libpython2.5.so.1.0(PyEval_EvalCodeEx+0x7ef)[0x4a6b7f] /usr/lib/libpython2.5.so.1.0[0x445eca] /usr/lib/libpython2.5.so.1.0(PyObject_Call+0x37)[0x426ef7] /usr/lib/libpython2.5.so.1.0[0x42e3f8] /usr/lib/libpython2.5.so.1.0(PyObject_Call+0x37)[0x426ef7] /usr/lib/libpython2.5.so.1.0(PyEval_CallObjectWithKeywords+0x7c)[0x49ed3c] /usr/lib/libpython2.5.so.1.0(PyInstance_New+0x6d)[0x4320fd] /usr/lib/libpython2.5.so.1.0(PyObject_Call+0x37)[0x426ef7] /usr/lib/libpython2.5.so.1.0(PyEval_EvalFrameEx+0x3611)[0x4a2f71] /usr/lib/libpython2.5.so.1.0(PyEval_EvalCodeEx+0x7ef)[0x4a6b7f] /usr/lib/libpython2.5.so.1.0(PyEval_EvalCode+0x63)[0x4a6c03] /usr/lib/libpython2.5.so.1.0[0x4c0496] /usr/lib/libpython2.5.so.1.0(PyRun_FileExFlags+0x8e)[0x4c054e] /usr/lib/libpython2.5.so.1.0(PyRun_SimpleFileExFlags+0x198)[0x4c1c08] /usr/lib/libpython2.5.so.1.0(PyRun_AnyFileExFlags+0x7a)[0x4c236a] /usr/lib/libpython2.5.so.1.0(Py_Main+0xa0d)[0x4cbdfd] python2(main+0x32)[0x8048582] /lib/libc.so.6(__libc_start_main+0xdc)[0x8f1e5c] python2[0x80484c1] ======= Memory map: ======== 00110000-0014e000 r-xp 00000000 08:02 6160442 /lib/libgobject-2.0.so.0.1200.7 0014e000-0014f000 rwxp 0003e000 08:02 6160442 /lib/libgobject-2.0.so.0.1200.7 0014f000-00153000 r-xp 00000000 08:02 6160449 /lib/libgthread-2.0.so.0.1200.7 00153000-00154000 rwxp 00003000 08:02 6160449 /lib/libgthread-2.0.so.0.1200.7 00154000-00156000 r-xp 00000000 08:02 6160409 /lib/libgmodule-2.0.so.0.1200.7 00156000-00157000 rwxp 00002000 08:02 6160409 /lib/libgmodule-2.0.so.0.1200.7 00157000-00159000 r-xp 00000000 08:02 1838518 /usr/lib/python2.5/lib-dynload/_randommodule.so 00159000-0015a000 rwxp 00002000 08:02 1838518 /usr/lib/python2.5/lib-dynload/_randommodule.so 0015a000-0015d000 r-xp 00000000 08:02 1838538 /usr/lib/python2.5/lib-dynload/fcntlmodule.so 0015d000-0015e000 rwxp 00003000 08:02 1838538 /usr/lib/python2.5/lib-dynload/fcntlmodule.so 0015e000-00161000 r-xp 00000000 08:02 1838514 /usr/lib/python2.5/lib-dynload/_localemodule.so 00161000-00162000 rwxp 00003000 08:02 1838514 /usr/lib/python2.5/lib-dynload/_localemodule.so 00162000-00275000 r-xp 00000000 08:02 1841441 /usr/lib/python2.5/site-packages/rhpl/iconv.so 00275000-0029b000 rwxp 00112000 08:02 1841441 /usr/lib/python2.5/site-packages/rhpl/iconv.so 0029b000-002a0000 rwxp 0029b000 00:00 0 002a0000-002a4000 r-xp 00000000 08:02 1838564 /usr/lib/python2.5/lib-dynload/zlibmodule.so 002a4000-002a5000 rwxp 00004000 08:02 1838564 /usr/lib/python2.5/lib-dynload/zlibmodule.so 002a5000-002a6000 r-xp 00000000 08:02 1841412 /usr/lib/python2.5/site-packages/rhpl/_translate.so 002a6000-002a7000 rwxp 00000000 08:02 1841412 /usr/lib/python2.5/site-packages/rhpl/_translate.so 002a7000-002a9000 r-xp 00000000 08:02 335290 /usr/lib/libXau.so.6.0.0 002a9000-002aa000 rwxp 00001000 08:02 335290 /usr/lib/libXau.so.6.0.0 002aa000-002b5000 r-xp 00000000 08:02 6161243 /lib/libgcc_s-4.1.1-20070105.so.1 002b5000-002b6000 rwxp 0000a000 08:02 6161243 /lib/libgcc_s-4.1.1-20070105.so.1 00331000-00335000 r-xp 00000000 08:02 1838556 /usr/lib/python2.5/lib-dynload/stropmodule.so 00335000-00337000 rwxp 00003000 08:02 1838556 /usr/lib/python2.5/lib-dynload/stropmodule.so 00404000-0051c000 r-xp 00000000 08:02 346004 /usr/lib/libpython2.5.so.1.0 0051c000-00542000 rwxp 00117000 08:02 346004 /usr/lib/libpython2.5.so.1.0 00542000-00548000 rwxp 00542000 00:00 0 005ef000-005f0000 r-xp 005ef000 00:00 0 [vdso] 00676000-00690000 r-xp 00000000 08:02 1842414 /usr/lib/python2.5/site-packages/ixf86configmodule.so 00690000-00694000 rwxp 0001a000 08:02 1842414 /usr/lib/python2.5/site-packages/ixf86configmodule.so 006e7000-0070c000 r-xp 00000000 08:02 1841475 /usr/lib/python2.5/site-packages/gtk-2.0/gobject/_gobject.so 0070c000-0070f000 rwxp 00024000 08:02 1841475 /usr/lib/python2.5/site-packages/gtk-2.0/gobject/_gobject.so 0070f000-00822000 r-xp 00000000 08:02 1843512 /usr/lib/python2.5/site-packages/rhpxl/_pyrandr.so 00822000-00847000 rwxp 00113000 08:02 1843512 /usr/lib/python2.5/site-packages/rhpxl/_pyrandr.so 00847000-0084d000 rwxp 00847000 00:00 0 00868000-0086e000 r-xp 00000000 08:02 1838523 /usr/lib/python2.5/lib-dynload/_struct.so 0086e000-0086f000 rwxp 00006000 08:02 1838523 /usr/lib/python2.5/lib-dynload/_struct.so 0089b000-0089d000 r-xp 00000000 08:02 6161406 /lib/libutil-2.5.90.so 0089d000-0089e000 r-xp 00001000 08:02 6161406 /lib/libutil-2.5.90.so 0089e000-0089f000 rwxp 00002000 08:02 6161406 /lib/libutil-2.5.90.so 008b9000-008d4000 r-xp 00000000 08:02 6160394 /lib/ld-2.5.90.so 008d4000-008d5000 r-xp 0001a000 08:02 6160394 /lib/ld-2.5.90.so 008d5000-008d6000 rwxp 0001b000 08:02 6160394 /lib/ld-2.5.90.so 008dc000-00a25000 r-xp 00000000 08:02 6161389 /lib/libc-2.5.90.so 00a25000-00a27000 r-xp 00149000 08:02 6161389 /lib/libc-2.5.90.so 00a27000-00a28000 rwxp 0014b000 08:02 6161389 /lib/libc-2.5.90.so 00a28000-00a2b000 rwxp 00a28000 00:00 0 00a2d000-00a54000 r-xp 00000000 08:02 6161395 /lib/libm-2.5.90.so 00a54000-00a55000 r-xp 00026000 08:02 6161395 /lib/libm-2.5.90.so 00a55000-00a56000 rwxp 00027000 08:02 6161395 /lib/libm-2.5.90.so 00a58000-00a5b000 r-xp 00000000 08:02 6161390 /lib/libdl-2.5.90.so 00a5b000-00a5c000 r-xp 00002000 08:02 6161390 /lib/libdl-2.5.90.so 00a5c000-00a5d000 rwxp 00003000 08:02 6161390 /lib/libdl-2.5.90.so 00a5f000-00a73000 r-xp 00000000 08:02 6161391 /lib/libpthread-2.5.90.so 00a73000-00a74000 r-xp 00013000 08:02 6161391 /lib/libpthread-2.5.90.so 00a74000-00a75000 rwxp 00014000 08:02 6161391 /lib/libpthread-2.5.90.so 00a75000-00a77000 rwxp 00a75000 00:00 0 00a79000-00a8b000 r-xp 00000000 08:02 337419 /usr/lib/libz.so.1.2.3 00a8b000-00a8c000 rwxp 00011000 08:02 337419 /usr/lib/libz.so.1.2.3 00b14000-00b17000 r-xp 00000000 08:02 1838544 /usr/lib/python2.5/lib-dynload/mathmodule.so 00b17000-00b18000 rwxp 00002000 08:02 1838544 /usr/lib/python2.5/lib-dynload/mathmodule.so 00b92000-00b97000 r-xp 00000000 08:02 331483 /usr/lib/libXdmcp.so.6.0.0 00b97000-00b98000 rwxp 00004000 08:02 331483 /usr/lib/libXdmcp.so.6.0.0 00b9f000-00ba6000 r-xp 00000000 08:02 6161392 /lib/librt-2.5.90.so 00ba6000-00ba7000 r-xp 00006000 08:02 6161392 /lib/librt-2.5.90.so 00ba7000-00ba8000 rwxp 00007000 08:02 6161392 /lib/librt-2.5.90.so 00baa000-00bb9000 r-xp 00000000 08:02 342826 /usr/lib/libXext.so.6.4.0 00bb9000-00bba000 rwxp 0000e000 08:02 342826 /usr/lib/libXext.so.6.4.0 00c05000-00c0b000 r-xp 00000000 08:02 1838547 /usr/lib/python2.5/lib-dynload/operator.so 00c0b000-00c0c000 rwxp 00006000 08:02 1838547 /usr/lib/python2.5/lib-dynload/operator.so 00c0c000-00d0a000 r-xp 00000000 08:02 331526 /usr/lib/libX11.so.6.2.0 00d0a000-00d0e000 rwxp 000fd000 08:02 331526 /usr/lib/libX11.so.6.2.0 00d5a000-00d62000 r-xp 00000000 08:02 331499 /usr/lib/libXrender.so.1.3.0 00d62000-00d63000 rwxp 00007000 08:02 331499 /usr/lib/libXrender.so.1.3.0 00d78000-00d7b000 r-xp 00000000 08:02 332723 /usr/lib/libXrandr.so.2.0.0 00d7b000-00d7c000 rwxp 00002000 08:02 332723 /usr/lib/libXrandr.so.2.0.0 00d85000-00da3000 r-xp 00000000 08:02 1841571 /usr/lib/python2.5/site-packages/_kudzumodule.so 00da3000-00da4000 rwxp 0001e000 08:02 1841571 /usr/lib/python2.5/site-packages/_kudzumodule.so 00dce000-00dd1000 r-xp 00000000 08:02 1838554 /usr/lib/python2.5/lib-dynload/selectmodule.so 00dd1000-00dd2000 rwxp 00002000 08:02 1838554 /usr/lib/python2.5/lib-dynload/selectmodule.so 00e2e000-00e32000 r-xp 00000000 08:02 1838528 /usr/lib/python2.5/lib-dynload/binascii.so 00e32000-00e33000 rwxp 00003000 08:02 1838528 /usr/lib/python2.5/lib-dynload/binascii.so 00e8d000-00f2a000 r-xp 00000000 08:02 6160399 /lib/libglib-2.0.so.0.1200.7 00f2a000-00f2b000 rwxp 0009d000 08:02 6160399 /lib/libglib-2.0.so.0.1200.7 00f51000-00f54000 r-xp 00000000 08:02 1838559 /usr/lib/python2.5/lib-dynload/timemodule.so 00f54000-00f56000 rwxp 00002000 08:02 1838559 /usr/lib/python2.5/lib-dynload/timemodule.so 08048000-08049000 r-xp 00000000 08:02 345269 /usr/bin/python 08049000-0804a000 rw-p 00000000 08:02 345269 /usr/bin/python 09642000-0986d000 rw-p 09642000 00:00 0 b7b00000-b7b21000 rw-p b7b00000 00:00 0 b7b21000-b7c00000 ---p b7b21000 00:00 0 b7c2b000-b7c6c000 rw-p b7c2b000 00:00 0 b7c6d000-b7e6d000 r--p 00000000 08:02 344428 /usr/lib/locale/locale-archive b7e6d000-b7ef2000 rw-p b7e6d000 00:00 0 b7f02000-b7f09000 r--s 00000000 08:02 400454 /usr/lib/gconv/gconv-modules.cache bff61000-bff77000 rw-p bff61000 00:00 0 [stack] /usr/share/system-config-display/system-config-display: line 2: 3049 Abgebrochen python2 /usr/share/system-config-display/xconf.py $@ [root at helios ~]# From linux00 at kornet.net Sat Jan 6 16:50:01 2007 From: linux00 at kornet.net (sangu) Date: Sun, 07 Jan 2007 01:50:01 +0900 Subject: system-config-display crashing In-Reply-To: <1168101188341636.0.ktmail6@ktmail6> References: <1168101188341636.0.ktmail6@ktmail6> Message-ID: <1168102201.2566.1.camel@localhost.localdomain> Please See : https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212780 2007-01-06 (?), 17:33 +0100, Robert M. Albrecht ???: > Hi, > > is somebody else seeing this ? > > I`m quite sure I used it this week, so the crash must have appeared in > the last few days. > > Running Rawhide with todays updates. > > cu romal > > > [root at helios ~]# system-config-display > *** glibc detected *** python2: free(): invalid pointer: 0x097b1b30 *** > ======= Backtrace: ========= > /lib/libc.so.6[0x941ffd] > /lib/libc.so.6(cfree+0x90)[0x945650] > /usr/lib/python2.5/site-packages/ixf86configmodule.so[0x67cdc1] > /usr/lib/python2.5/site-packages/ixf86configmodule.so[0x67e43c] > /usr/lib/python2.5/site-packages/ixf86configmodule.so[0x67cda1] > /usr/lib/python2.5/site-packages/ixf86configmodule.so[0x67d25c] > /usr/lib/libpython2.5.so.1.0(PyEval_EvalFrameEx+0x13dc)[0x4a0d3c] > /usr/lib/libpython2.5.so.1.0(PyEval_EvalFrameEx+0x63cf)[0x4a5d2f] > /usr/lib/libpython2.5.so.1.0(PyEval_EvalFrameEx+0x63cf)[0x4a5d2f] > /usr/lib/libpython2.5.so.1.0(PyEval_EvalCodeEx+0x7ef)[0x4a6b7f] > /usr/lib/libpython2.5.so.1.0[0x445eca] > /usr/lib/libpython2.5.so.1.0(PyObject_Call+0x37)[0x426ef7] > /usr/lib/libpython2.5.so.1.0[0x42e3f8] > /usr/lib/libpython2.5.so.1.0(PyObject_Call+0x37)[0x426ef7] > /usr/lib/libpython2.5.so.1.0(PyEval_CallObjectWithKeywords+0x7c)[0x49ed3c] > /usr/lib/libpython2.5.so.1.0(PyInstance_New+0x6d)[0x4320fd] > /usr/lib/libpython2.5.so.1.0(PyObject_Call+0x37)[0x426ef7] > /usr/lib/libpython2.5.so.1.0(PyEval_EvalFrameEx+0x3611)[0x4a2f71] > /usr/lib/libpython2.5.so.1.0(PyEval_EvalCodeEx+0x7ef)[0x4a6b7f] > /usr/lib/libpython2.5.so.1.0(PyEval_EvalCode+0x63)[0x4a6c03] > /usr/lib/libpython2.5.so.1.0[0x4c0496] > /usr/lib/libpython2.5.so.1.0(PyRun_FileExFlags+0x8e)[0x4c054e] > /usr/lib/libpython2.5.so.1.0(PyRun_SimpleFileExFlags+0x198)[0x4c1c08] > /usr/lib/libpython2.5.so.1.0(PyRun_AnyFileExFlags+0x7a)[0x4c236a] > /usr/lib/libpython2.5.so.1.0(Py_Main+0xa0d)[0x4cbdfd] > python2(main+0x32)[0x8048582] > /lib/libc.so.6(__libc_start_main+0xdc)[0x8f1e5c] > python2[0x80484c1] > ======= Memory map: ======== > 00110000-0014e000 r-xp 00000000 08:02 6160442 > /lib/libgobject-2.0.so.0.1200.7 > 0014e000-0014f000 rwxp 0003e000 08:02 6160442 > /lib/libgobject-2.0.so.0.1200.7 > 0014f000-00153000 r-xp 00000000 08:02 6160449 > /lib/libgthread-2.0.so.0.1200.7 > 00153000-00154000 rwxp 00003000 08:02 6160449 > /lib/libgthread-2.0.so.0.1200.7 > 00154000-00156000 r-xp 00000000 08:02 6160409 > /lib/libgmodule-2.0.so.0.1200.7 > 00156000-00157000 rwxp 00002000 08:02 6160409 > /lib/libgmodule-2.0.so.0.1200.7 > 00157000-00159000 r-xp 00000000 08:02 1838518 > /usr/lib/python2.5/lib-dynload/_randommodule.so > 00159000-0015a000 rwxp 00002000 08:02 1838518 > /usr/lib/python2.5/lib-dynload/_randommodule.so > 0015a000-0015d000 r-xp 00000000 08:02 1838538 > /usr/lib/python2.5/lib-dynload/fcntlmodule.so > 0015d000-0015e000 rwxp 00003000 08:02 1838538 > /usr/lib/python2.5/lib-dynload/fcntlmodule.so > 0015e000-00161000 r-xp 00000000 08:02 1838514 > /usr/lib/python2.5/lib-dynload/_localemodule.so > 00161000-00162000 rwxp 00003000 08:02 1838514 > /usr/lib/python2.5/lib-dynload/_localemodule.so > 00162000-00275000 r-xp 00000000 08:02 1841441 > /usr/lib/python2.5/site-packages/rhpl/iconv.so > 00275000-0029b000 rwxp 00112000 08:02 1841441 > /usr/lib/python2.5/site-packages/rhpl/iconv.so > 0029b000-002a0000 rwxp 0029b000 00:00 0 > 002a0000-002a4000 r-xp 00000000 08:02 1838564 > /usr/lib/python2.5/lib-dynload/zlibmodule.so > 002a4000-002a5000 rwxp 00004000 08:02 1838564 > /usr/lib/python2.5/lib-dynload/zlibmodule.so > 002a5000-002a6000 r-xp 00000000 08:02 1841412 > /usr/lib/python2.5/site-packages/rhpl/_translate.so > 002a6000-002a7000 rwxp 00000000 08:02 1841412 > /usr/lib/python2.5/site-packages/rhpl/_translate.so > 002a7000-002a9000 r-xp 00000000 08:02 335290 /usr/lib/libXau.so.6.0.0 > 002a9000-002aa000 rwxp 00001000 08:02 335290 /usr/lib/libXau.so.6.0.0 > 002aa000-002b5000 r-xp 00000000 08:02 6161243 > /lib/libgcc_s-4.1.1-20070105.so.1 > 002b5000-002b6000 rwxp 0000a000 08:02 6161243 > /lib/libgcc_s-4.1.1-20070105.so.1 > 00331000-00335000 r-xp 00000000 08:02 1838556 > /usr/lib/python2.5/lib-dynload/stropmodule.so > 00335000-00337000 rwxp 00003000 08:02 1838556 > /usr/lib/python2.5/lib-dynload/stropmodule.so > 00404000-0051c000 r-xp 00000000 08:02 346004 > /usr/lib/libpython2.5.so.1.0 > 0051c000-00542000 rwxp 00117000 08:02 346004 > /usr/lib/libpython2.5.so.1.0 > 00542000-00548000 rwxp 00542000 00:00 0 > 005ef000-005f0000 r-xp 005ef000 00:00 0 [vdso] > 00676000-00690000 r-xp 00000000 08:02 1842414 > /usr/lib/python2.5/site-packages/ixf86configmodule.so > 00690000-00694000 rwxp 0001a000 08:02 1842414 > /usr/lib/python2.5/site-packages/ixf86configmodule.so > 006e7000-0070c000 r-xp 00000000 08:02 1841475 > /usr/lib/python2.5/site-packages/gtk-2.0/gobject/_gobject.so > 0070c000-0070f000 rwxp 00024000 08:02 1841475 > /usr/lib/python2.5/site-packages/gtk-2.0/gobject/_gobject.so > 0070f000-00822000 r-xp 00000000 08:02 1843512 > /usr/lib/python2.5/site-packages/rhpxl/_pyrandr.so > 00822000-00847000 rwxp 00113000 08:02 1843512 > /usr/lib/python2.5/site-packages/rhpxl/_pyrandr.so > 00847000-0084d000 rwxp 00847000 00:00 0 > 00868000-0086e000 r-xp 00000000 08:02 1838523 > /usr/lib/python2.5/lib-dynload/_struct.so > 0086e000-0086f000 rwxp 00006000 08:02 1838523 > /usr/lib/python2.5/lib-dynload/_struct.so > 0089b000-0089d000 r-xp 00000000 08:02 6161406 /lib/libutil-2.5.90.so > 0089d000-0089e000 r-xp 00001000 08:02 6161406 /lib/libutil-2.5.90.so > 0089e000-0089f000 rwxp 00002000 08:02 6161406 /lib/libutil-2.5.90.so > 008b9000-008d4000 r-xp 00000000 08:02 6160394 /lib/ld-2.5.90.so > 008d4000-008d5000 r-xp 0001a000 08:02 6160394 /lib/ld-2.5.90.so > 008d5000-008d6000 rwxp 0001b000 08:02 6160394 /lib/ld-2.5.90.so > 008dc000-00a25000 r-xp 00000000 08:02 6161389 /lib/libc-2.5.90.so > 00a25000-00a27000 r-xp 00149000 08:02 6161389 /lib/libc-2.5.90.so > 00a27000-00a28000 rwxp 0014b000 08:02 6161389 /lib/libc-2.5.90.so > 00a28000-00a2b000 rwxp 00a28000 00:00 0 > 00a2d000-00a54000 r-xp 00000000 08:02 6161395 /lib/libm-2.5.90.so > 00a54000-00a55000 r-xp 00026000 08:02 6161395 /lib/libm-2.5.90.so > 00a55000-00a56000 rwxp 00027000 08:02 6161395 /lib/libm-2.5.90.so > 00a58000-00a5b000 r-xp 00000000 08:02 6161390 /lib/libdl-2.5.90.so > 00a5b000-00a5c000 r-xp 00002000 08:02 6161390 /lib/libdl-2.5.90.so > 00a5c000-00a5d000 rwxp 00003000 08:02 6161390 /lib/libdl-2.5.90.so > 00a5f000-00a73000 r-xp 00000000 08:02 6161391 /lib/libpthread-2.5.90.so > 00a73000-00a74000 r-xp 00013000 08:02 6161391 /lib/libpthread-2.5.90.so > 00a74000-00a75000 rwxp 00014000 08:02 6161391 /lib/libpthread-2.5.90.so > 00a75000-00a77000 rwxp 00a75000 00:00 0 > 00a79000-00a8b000 r-xp 00000000 08:02 337419 /usr/lib/libz.so.1.2.3 > 00a8b000-00a8c000 rwxp 00011000 08:02 337419 /usr/lib/libz.so.1.2.3 > 00b14000-00b17000 r-xp 00000000 08:02 1838544 > /usr/lib/python2.5/lib-dynload/mathmodule.so > 00b17000-00b18000 rwxp 00002000 08:02 1838544 > /usr/lib/python2.5/lib-dynload/mathmodule.so > 00b92000-00b97000 r-xp 00000000 08:02 331483 /usr/lib/libXdmcp.so.6.0.0 > 00b97000-00b98000 rwxp 00004000 08:02 331483 /usr/lib/libXdmcp.so.6.0.0 > 00b9f000-00ba6000 r-xp 00000000 08:02 6161392 /lib/librt-2.5.90.so > 00ba6000-00ba7000 r-xp 00006000 08:02 6161392 /lib/librt-2.5.90.so > 00ba7000-00ba8000 rwxp 00007000 08:02 6161392 /lib/librt-2.5.90.so > 00baa000-00bb9000 r-xp 00000000 08:02 342826 /usr/lib/libXext.so.6.4.0 > 00bb9000-00bba000 rwxp 0000e000 08:02 342826 /usr/lib/libXext.so.6.4.0 > 00c05000-00c0b000 r-xp 00000000 08:02 1838547 > /usr/lib/python2.5/lib-dynload/operator.so > 00c0b000-00c0c000 rwxp 00006000 08:02 1838547 > /usr/lib/python2.5/lib-dynload/operator.so > 00c0c000-00d0a000 r-xp 00000000 08:02 331526 /usr/lib/libX11.so.6.2.0 > 00d0a000-00d0e000 rwxp 000fd000 08:02 331526 /usr/lib/libX11.so.6.2.0 > 00d5a000-00d62000 r-xp 00000000 08:02 331499 > /usr/lib/libXrender.so.1.3.0 > 00d62000-00d63000 rwxp 00007000 08:02 331499 > /usr/lib/libXrender.so.1.3.0 > 00d78000-00d7b000 r-xp 00000000 08:02 332723 /usr/lib/libXrandr.so.2.0.0 > 00d7b000-00d7c000 rwxp 00002000 08:02 332723 /usr/lib/libXrandr.so.2.0.0 > 00d85000-00da3000 r-xp 00000000 08:02 1841571 > /usr/lib/python2.5/site-packages/_kudzumodule.so > 00da3000-00da4000 rwxp 0001e000 08:02 1841571 > /usr/lib/python2.5/site-packages/_kudzumodule.so > 00dce000-00dd1000 r-xp 00000000 08:02 1838554 > /usr/lib/python2.5/lib-dynload/selectmodule.so > 00dd1000-00dd2000 rwxp 00002000 08:02 1838554 > /usr/lib/python2.5/lib-dynload/selectmodule.so > 00e2e000-00e32000 r-xp 00000000 08:02 1838528 > /usr/lib/python2.5/lib-dynload/binascii.so > 00e32000-00e33000 rwxp 00003000 08:02 1838528 > /usr/lib/python2.5/lib-dynload/binascii.so > 00e8d000-00f2a000 r-xp 00000000 08:02 6160399 > /lib/libglib-2.0.so.0.1200.7 > 00f2a000-00f2b000 rwxp 0009d000 08:02 6160399 > /lib/libglib-2.0.so.0.1200.7 > 00f51000-00f54000 r-xp 00000000 08:02 1838559 > /usr/lib/python2.5/lib-dynload/timemodule.so > 00f54000-00f56000 rwxp 00002000 08:02 1838559 > /usr/lib/python2.5/lib-dynload/timemodule.so > 08048000-08049000 r-xp 00000000 08:02 345269 /usr/bin/python > 08049000-0804a000 rw-p 00000000 08:02 345269 /usr/bin/python > 09642000-0986d000 rw-p 09642000 00:00 0 > b7b00000-b7b21000 rw-p b7b00000 00:00 0 > b7b21000-b7c00000 ---p b7b21000 00:00 0 > b7c2b000-b7c6c000 rw-p b7c2b000 00:00 0 > b7c6d000-b7e6d000 r--p 00000000 08:02 344428 > /usr/lib/locale/locale-archive > b7e6d000-b7ef2000 rw-p b7e6d000 00:00 0 > b7f02000-b7f09000 r--s 00000000 08:02 400454 > /usr/lib/gconv/gconv-modules.cache > bff61000-bff77000 rw-p bff61000 00:00 0 [stack] > /usr/share/system-config-display/system-config-display: line 2: 3049 > Abgebrochen python2 /usr/share/system-config-display/xconf.py $@ > [root at helios ~]# > From michal at harddata.com Sat Jan 6 18:13:41 2007 From: michal at harddata.com (Michal Jaegermann) Date: Sat, 6 Jan 2007 11:13:41 -0700 Subject: system-config-display crashing In-Reply-To: <1168102201.2566.1.camel@localhost.localdomain> References: <1168101188341636.0.ktmail6@ktmail6> <1168102201.2566.1.camel@localhost.localdomain> Message-ID: <20070106181341.GB17733@mail.harddata.com> On Sun, Jan 07, 2007 at 01:50:01AM +0900, sangu wrote: > Please See : https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212780 And also https://bugzillha.redhat.com/bugzilla/show_bug.cgi?id=220923 and I suspect that other similar ones can be found if you will carefuly search through bugzilla. Michal From katzj at redhat.com Sat Jan 6 20:53:51 2007 From: katzj at redhat.com (Jeremy Katz) Date: Sat, 06 Jan 2007 15:53:51 -0500 Subject: system-config-display crashing In-Reply-To: <20070106181341.GB17733@mail.harddata.com> References: <1168101188341636.0.ktmail6@ktmail6> <1168102201.2566.1.camel@localhost.localdomain> <20070106181341.GB17733@mail.harddata.com> Message-ID: <1168116831.10335.6.camel@aglarond.local> On Sat, 2007-01-06 at 11:13 -0700, Michal Jaegermann wrote: > On Sun, Jan 07, 2007 at 01:50:01AM +0900, sangu wrote: > > Please See : https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212780 > > And also > https://bugzillha.redhat.com/bugzilla/show_bug.cgi?id=220923 > and I suspect that other similar ones can be found if you will > carefuly search through bugzilla. Okay, I had enough time today to finally look into these. Prior to python 2.5, PyObject_{malloc,realloc,free} and PyMem_{malloc,realloc,free} were essentially just defines to the system level functions. With python 2.5, they instead do some other actions that are different for each family of functions so that the memory usage of the interpreter can drop at times.[1] Hence, inconsistent use ==> segfaults. Fixed up libuser, newt and pyxf86config (which were the ones I could find bugs on). Jeremy [1] http://docs.python.org/whatsnew/ports.html From paul at all-the-johnsons.co.uk Sat Jan 6 21:53:48 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Sat, 06 Jan 2007 21:53:48 +0000 Subject: rawhide report: 20070106 changes In-Reply-To: <200701061126.l06BQKq6029123@hs20-bc2-6.build.redhat.com> References: <200701061126.l06BQKq6029123@hs20-bc2-6.build.redhat.com> Message-ID: <1168120428.3702.2.camel@T7.Linux> Hi, > openoffice.org-1:2.1.0-6.10 > --------------------------- On my x86_64 box, this version dies horribly if you load or import any MS or OOo file. Is anyone else seeing this? TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From dtimms at iinet.net.au Sat Jan 6 23:11:43 2007 From: dtimms at iinet.net.au (David Timms) Date: Sun, 07 Jan 2007 10:11:43 +1100 Subject: Difference between a test update and a release of same In-Reply-To: <459F636F.6070207@fedoraproject.org> References: <459F41FD.7010106@iinet.net.au> <459F636F.6070207@fedoraproject.org> Message-ID: <45A02CAF.3060008@iinet.net.au> Rahul Sundaram wrote: > David Timms wrote: >> Hi, if I am testing a particular update say dvd+rw-tools, if the test >> package is pushed into updates, are the rpm's identical ? >> >> Or are they identical before they are signed for each repository >> {updates, updates-testing} ? > > Yes. > >> >> I ask to confirm whether or not when the final update is released, will >> I get it through yum, or will it be the identical EVR and hence not need >> installing ? > > Yes. Thats right. > > {Although the --info of the package would say it is >> -testing package.} > > Yum info and list comamnds would actually say its installed. Only when a > package is not installed does it show you the repository information. > >> >> If yum will get the update version, I guess that would mean a double >> download ? > > That shouldnt happen. OK, thanks for clearing that up Rahul. DaveT. From vonbrand at inf.utfsm.cl Sat Jan 6 22:10:50 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Sat, 06 Jan 2007 19:10:50 -0300 Subject: Difference between a test update and a release of same In-Reply-To: Message from Rahul Sundaram of "Sat, 06 Jan 2007 14:23:03 +0530." <459F636F.6070207@fedoraproject.org> Message-ID: <200701062210.l06MAoDO011257@laptop13.inf.utfsm.cl> Rahul Sundaram wrote: > David Timms wrote: > > Hi, if I am testing a particular update say dvd+rw-tools, if the test > > package is pushed into updates, are the rpm's identical ? > > Or are they identical before they are signed for each repository > > {updates, updates-testing} ? > > Yes. Expanding a bit on this, the Developer Guidelines ask for the release to be bumped each time a new package is built, however minor the change. -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From vonbrand at inf.utfsm.cl Sat Jan 6 23:59:08 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Sat, 06 Jan 2007 20:59:08 -0300 Subject: rawhide report: 20070106 changes In-Reply-To: Your message of "Sat, 06 Jan 2007 21:53:48 -0000." <1168120428.3702.2.camel@T7.Linux> Message-ID: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> Paul wrote: > > openoffice.org-1:2.1.0-6.10 > > --------------------------- > On my x86_64 box, this version dies horribly if you load or import any > MS or OOo file. Is anyone else seeing this? In i686 oowriter works with MSFT files, and ooimpress with OOo files. -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From paul at all-the-johnsons.co.uk Sun Jan 7 00:27:48 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Sun, 07 Jan 2007 00:27:48 +0000 Subject: rawhide report: 20070106 changes In-Reply-To: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> References: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> Message-ID: <1168129668.3702.7.camel@T7.Linux> Hi, On Sat, 2007-01-06 at 20:59 -0300, Horst H. von Brand wrote: > Paul wrote: > > > openoffice.org-1:2.1.0-6.10 > > > --------------------------- > > > On my x86_64 box, this version dies horribly if you load or import any > > MS or OOo file. Is anyone else seeing this? > > In i686 oowriter works with MSFT files, and ooimpress with OOo files. Looks like an x86_64 problem. Thanks. TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From fct-cornette at insight.rr.com Sun Jan 7 03:40:51 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Sat, 06 Jan 2007 22:40:51 -0500 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? Message-ID: <45A06BC3.9090909@insight.rr.com> I have two programs which cause a segfault on exit. The first is Aisleriot only if you win the game and select quit for exit. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221046 Upstream thought that the problem is actually caused by the guile package. The most recent problem is with system-config-lvm. If you exit the program I end up getting bug buddy collecting information for a bug report. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221739 Anyway, another question is for s-c-lvm, there is no debuginfo package when I tried to install the package for debugging purposes. Is there a package for this program? Jim -- A right is not what someone gives you; it's what no one can take from you. -- Ramsey Clark From dtimms at iinet.net.au Sun Jan 7 03:43:41 2007 From: dtimms at iinet.net.au (David Timms) Date: Sun, 07 Jan 2007 14:43:41 +1100 Subject: Difference between a test update and a release of same In-Reply-To: <200701062210.l06MAoDO011257@laptop13.inf.utfsm.cl> References: <200701062210.l06MAoDO011257@laptop13.inf.utfsm.cl> Message-ID: <45A06C6D.1010409@iinet.net.au> Horst H. von Brand wrote: > Rahul Sundaram wrote: >> David Timms wrote: >>> Hi, if I am testing a particular update say dvd+rw-tools, if the test >>> package is pushed into updates, are the rpm's identical ? >>> Or are they identical before they are signed for each repository >>> {updates, updates-testing} ? >> Yes. > > Expanding a bit on this, the Developer Guidelines ask for the release to be > bumped each time a new package is built, however minor the change. Which makes sense or you would have total confusion with v4.5.6 works here, but not over here because they could have been different version of identical package. From the point of view of an updates-testing compared to an updates package of the same version, is the package actually rebuilt (ie from .src/spec), or is it just the signing authority that is different ? Actually, I found a package that is currently in both repos: $ ls -lgG virt-manager-0.2.6-3.fc6.i386.rpm* -rw-r--r-- 1 566479 Jan 7 14:03 virt-manager-0.2.6-3.fc6.i386.rpm -rw-r--r-- 1 566479 Jan 7 14:03 virt-manager-0.2.6-3.fc6.i386.rpm.test -same size $ md5sum vir* ebcb47c6fba4a4a6707a80c375507984 virt-manager-0.2.6-3.fc6.i386.rpm 6f755debee94a707ae2513cb7d8d59bc virt-manager-0.2.6-3.fc6.i386.rpm.test -but definitely different. $ rpmdiff virt-manager-0.2.6-3.fc6.i386.rpm virt-manager-0.2.6-3.fc6.i386.rpm.test $ -but no changed files $ diff -C 0 z.t.txt z.txt *** info.test.txt 2007-01-07 14:07:23.000000000 +1100 --- info.txt 2007-01-07 14:07:30.000000000 +1100 *************** *** 7 **** ! Signature : DSA/SHA1, Fri 22 Dec 2006 08:36:38 AM EST, Key ID da84cbd430c9ecf8 --- 7 ---- ! Signature : DSA/SHA1, Wed 03 Jan 2007 02:18:34 AM EST, Key ID b44269d04f2a6fd2 =>only the signature date and key ID is different. build host and date are identical. I wanted to understand how a production system might be affected by using a updates-testing package {that solves a problem}. It seems if that particular -testing package is eventually moved to the stable updates, then the only detectable difference is the signing date and time of the rpm, ie it can not introduce any binary/code differences between a system that has the package version from either repo. Thanks Horst. DaveT. From jkeating at redhat.com Sun Jan 7 03:46:23 2007 From: jkeating at redhat.com (Jesse Keating) Date: Sat, 6 Jan 2007 22:46:23 -0500 Subject: Difference between a test update and a release of same In-Reply-To: <45A06C6D.1010409@iinet.net.au> References: <200701062210.l06MAoDO011257@laptop13.inf.utfsm.cl> <45A06C6D.1010409@iinet.net.au> Message-ID: <200701062246.26896.jkeating@redhat.com> On Saturday 06 January 2007 22:43, David Timms wrote: > ?From the point of view of an updates-testing compared to an updates > package of the same version, is the package actually rebuilt (ie from > .src/spec), or is it just the signing authority that is different ? Just the signing is different. The buildsystem outputs the package unsigned, we then make a copy of it and sign it with the testing key for updates-testing, then for final, we make a copy of it and sign it with the final key. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From paul at permanentmail.com Sun Jan 7 04:56:23 2007 From: paul at permanentmail.com (Paul Dickson) Date: Sat, 6 Jan 2007 21:56:23 -0700 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <45A06BC3.9090909@insight.rr.com> References: <45A06BC3.9090909@insight.rr.com> Message-ID: <20070106215623.77f24187.paul@permanentmail.com> On Sat, 06 Jan 2007 22:40:51 -0500, Jim Cornette wrote: > I have two programs which cause a segfault on exit. The first is > Aisleriot only if you win the game and select quit for exit. > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221046 > Upstream thought that the problem is actually caused by the guile package. > > The most recent problem is with system-config-lvm. If you exit the > program I end up getting bug buddy collecting information for a bug report. > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221739 > > > Anyway, another question is for s-c-lvm, there is no debuginfo package > when I tried to install the package for debugging purposes. Is there a > package for this program? I'm seeing this with gnucash, which triggers bug-buddy which segfaults when it too exits. I'm current up-to-date with fedora development. Rolling back gnucash to 2.0.1 doesn't change the segfaults. -Paul From buildsys at redhat.com Sun Jan 7 11:16:43 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sun, 7 Jan 2007 06:16:43 -0500 Subject: rawhide report: 20070107 changes Message-ID: <200701071116.l07BGh4X023722@hs20-bc2-6.build.redhat.com> Updated Packages: agg-2.5-1 --------- * Sat Jan 06 2007 Caolan McNamara - 2.5-1 - bump to 2.5 eclipse-1:3.2.1-27.fc7 ---------------------- * Fri Jan 05 2007 Ben Konrath 3.2.1-27 - Use /g in tomcat version replacement. - Disable com.jcraft.jsch_0.1.28.jar and org.eclipse.osgi_3.2.1.R32x_v20060919.jar on ia64. * Tue Dec 19 2006 Ben Konrath 3.2.1-26 - Use sed instead of patch for tomcat version. - Add BuildRequires desktop-file-utils. * Wed Dec 06 2006 Ben Konrath 3.2.1-25 - Add %{_libdir}/eclipse dir to files list of libswt-gtk2. - Resolves: #211008. kernel-2.6.19-1.2905.fc7 ------------------------ * Sat Jan 06 2007 Dave Jones - 2.6.20rc3-git4 libuser-0.55-2 -------------- * Sat Jan 06 2007 Jeremy Katz - 0.55-2 - Fix inconsistent PyObject/PyMem usage (#220679) newt-0.52.4-3.fc7 ----------------- * Sat Jan 06 2007 Jeremy Katz - 0.52.4-3 - fix memory allocation in snack to be consistent (#212780) python-2.5-8.fc7 ---------------- * Sat Jan 06 2007 Jeremy Katz - 2.5.3-8 - fix extensions to use shared libpython (#219564) - all 64bit platforms need the regex fix (#122304) * Wed Jan 03 2007 Jeremy Katz - 2.5.3-7 - fix ctypes to not require execstack (#220669) * Fri Dec 15 2006 Jeremy Katz - 2.5.3-6 - don't link against compat-db (Robert Scheck) pyxf86config-0.3.32-1.fc7 ------------------------- * Sat Jan 06 2007 Jeremy Katz - 0.3.32-1 - Fix inconsistent PyObject/PyMem usage (#219918, #220993) setroubleshoot-1.8.13-1.fc7 --------------------------- * Sat Jan 06 2007 John Dennis - 1.8.13-1 - update translations - change SETroubleshootDatabase so it is optional if it's backed by a file, this fixes the problem of us littering temporary files when scanning logfiles which does not require persistence. - disable the view logfile menu item if no logfile has been opened - fix redundant log messages for case where there is no log file and the console flag is set. When there is no log file the logging module opens a console stream, thus the console stream produced by the console flag was redundant. - add username and password command line arguments rework startup logic so that all command line args are processed before we do any real work - rework the email preferences so that each email address can have a filter type associated with it. add a new filter_type "Ignore After First Alert" which filters after the first alert has been delivered - add UI for setting the email addresses alerts are sent to. Add menu item to edit email list, add email list dialog. Remove 'recipient' config file entry, now list is stored in seperate file. Add rpc to query and set the email list, the GUI calls this to get the current list from the server and set it in the server, it is the server which reads and writes the file. Add 'enable' flag to each email entry. Modify how the server iterates over the email list when it receives an alert. When marking an alert as having been sent the username is the email address but with 'email:' prepended so as not to collide with non-email filtering options for the same user. Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From fct-cornette at insight.rr.com Sun Jan 7 13:57:54 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Sun, 07 Jan 2007 08:57:54 -0500 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <20070106215623.77f24187.paul@permanentmail.com> References: <45A06BC3.9090909@insight.rr.com> <20070106215623.77f24187.paul@permanentmail.com> Message-ID: <45A0FC62.4050909@insight.rr.com> Paul Dickson wrote: > On Sat, 06 Jan 2007 22:40:51 -0500, Jim Cornette wrote: > > >> I have two programs which cause a segfault on exit. The first is >> Aisleriot only if you win the game and select quit for exit. >> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221046 >> Upstream thought that the problem is actually caused by the guile package. >> >> The most recent problem is with system-config-lvm. If you exit the >> program I end up getting bug buddy collecting information for a bug report. >> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221739 >> >> >> Anyway, another question is for s-c-lvm, there is no debuginfo package >> when I tried to install the package for debugging purposes. Is there a >> package for this program? >> > > I'm seeing this with gnucash, which triggers bug-buddy which segfaults > when it too exits. > > I'm current up-to-date with fedora development. Rolling back gnucash to > 2.0.1 doesn't change the segfaults. > > -Paul > > Thanks for the info. Bug buddy exiting also might be a big problem if it also exits without gathering information for the bug report. Bug Buddy woks fine and gathers information for the two failures that I'm getting. I'll try gnucash later to see if it crashes on exit for me and if bug buddy can grab any information without crashing. Jim From caolanm at redhat.com Sun Jan 7 14:28:08 2007 From: caolanm at redhat.com (Caolan McNamara) Date: Sun, 07 Jan 2007 14:28:08 +0000 Subject: rawhide report: 20070106 changes In-Reply-To: <1168129668.3702.7.camel@T7.Linux> References: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> <1168129668.3702.7.camel@T7.Linux> Message-ID: <1168180089.32293.2.camel@soulcrusher.caolan.org> On Sun, 2007-01-07 at 00:27 +0000, Paul wrote: > Hi, > > On Sat, 2007-01-06 at 20:59 -0300, Horst H. von Brand wrote: > > Paul wrote: > > > > openoffice.org-1:2.1.0-6.10 > > > > --------------------------- > > > > > On my x86_64 box, this version dies horribly if you load or import any > > > MS or OOo file. Is anyone else seeing this? > > > > In i686 oowriter works with MSFT files, and ooimpress with OOo files. > > Looks like an x86_64 problem. Thanks. Indeed, there's something horribly busted on x86_64 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221716 i.e. everything that crashes with a mention of WeakImplHelper_query The wheels have likely either come off visibility markup, and/or some related one definition rule cock-up. Odd that i386 shows no ill effects though. C. From paul at all-the-johnsons.co.uk Sun Jan 7 14:30:41 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Sun, 07 Jan 2007 14:30:41 +0000 Subject: rawhide report: 20070106 changes In-Reply-To: <1168180089.32293.2.camel@soulcrusher.caolan.org> References: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> <1168129668.3702.7.camel@T7.Linux> <1168180089.32293.2.camel@soulcrusher.caolan.org> Message-ID: <1168180241.3650.2.camel@T7.Linux> HI, > > > > > openoffice.org-1:2.1.0-6.10 > > > > > --------------------------- > > Looks like an x86_64 problem. Thanks. > > Indeed, there's something horribly busted on x86_64 > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221716 > > i.e. everything that crashes with a mention of WeakImplHelper_query Is there a work around that can be implemented between now and when the fix hits the fan? ETA on a fix for this? I hate reverting to using Win32 OOo so I can get stuff done for work! TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From caolanm at redhat.com Sun Jan 7 14:49:57 2007 From: caolanm at redhat.com (Caolan McNamara) Date: Sun, 07 Jan 2007 14:49:57 +0000 Subject: rawhide report: 20070106 changes In-Reply-To: <1168180241.3650.2.camel@T7.Linux> References: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> <1168129668.3702.7.camel@T7.Linux> <1168180089.32293.2.camel@soulcrusher.caolan.org> <1168180241.3650.2.camel@T7.Linux> Message-ID: <1168181397.8056.0.camel@soulcrusher.caolan.org> On Sun, 2007-01-07 at 14:30 +0000, Paul wrote: > HI, > > > > > > > openoffice.org-1:2.1.0-6.10 > > > > > > --------------------------- > > > > Looks like an x86_64 problem. Thanks. > > > > Indeed, there's something horribly busted on x86_64 > > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221716 > > > > i.e. everything that crashes with a mention of WeakImplHelper_query > > Is there a work around that can be implemented between now and when the > fix hits the fan? ETA on a fix for this? I hate reverting to using Win32 > OOo so I can get stuff done for work! Don't know what the problem is yet. reverting to the previous OOO 2.1.0-6.9 should work I assume. C. From paul at all-the-johnsons.co.uk Sun Jan 7 15:01:03 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Sun, 07 Jan 2007 15:01:03 +0000 Subject: rawhide report: 20070106 changes In-Reply-To: <1168181397.8056.0.camel@soulcrusher.caolan.org> References: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> <1168129668.3702.7.camel@T7.Linux> <1168180089.32293.2.camel@soulcrusher.caolan.org> <1168180241.3650.2.camel@T7.Linux> <1168181397.8056.0.camel@soulcrusher.caolan.org> Message-ID: <1168182063.3650.5.camel@T7.Linux> Hi, > Don't know what the problem is yet. reverting to the previous OOO > 2.1.0-6.9 should work I assume. Drat. Only got 2.1.0-6.9 on in var/cache/yum. Don't suppose you could upload the x86_64 packages somewhere? Pretty please with beer? TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From michal at harddata.com Sun Jan 7 16:43:43 2007 From: michal at harddata.com (Michal Jaegermann) Date: Sun, 7 Jan 2007 09:43:43 -0700 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <45A06BC3.9090909@insight.rr.com> References: <45A06BC3.9090909@insight.rr.com> Message-ID: <20070107164343.GA3884@mail.harddata.com> On Sat, Jan 06, 2007 at 10:40:51PM -0500, Jim Cornette wrote: > > The most recent problem is with system-config-lvm. If you exit the > program I end up getting bug buddy collecting information for a bug report. > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221739 That one happens to be a duplicate of https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221539 but you definitely got much more interesting traces from bug-buddy. I will leave to Jim Parsons which of these two he wants to track. > Anyway, another question is for s-c-lvm, there is no debuginfo package > when I tried to install the package for debugging purposes. Is there a > package for this program? s-c-lvm is really a pile of Python scripts so this package is its own source :-) and there is no other symbolic information which debuggers could use. All the info you need and can get you already installed. Michal From selinux at gmail.com Sun Jan 7 17:55:38 2007 From: selinux at gmail.com (Tom London) Date: Sun, 7 Jan 2007 09:55:38 -0800 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <20070107164343.GA3884@mail.harddata.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> Message-ID: <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> On 1/7/07, Michal Jaegermann wrote: > On Sat, Jan 06, 2007 at 10:40:51PM -0500, Jim Cornette wrote: > > > > The most recent problem is with system-config-lvm. If you exit the > > program I end up getting bug buddy collecting information for a bug report. > > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221739 > > That one happens to be a duplicate of > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221539 > but you definitely got much more interesting traces from bug-buddy. > I will leave to Jim Parsons which of these two he wants to track. > > > Anyway, another question is for s-c-lvm, there is no debuginfo package > > when I tried to install the package for debugging purposes. Is there a > > package for this program? > > s-c-lvm is really a pile of Python scripts so this package is > its own source :-) and there is no other symbolic information which > debuggers could use. All the info you need and can get you > already installed. > > Michal > I seem to have 'worked around' some similar 'bug buddy reports' by reverting ORBit2 and ORBit2-devel to 2.14.3-4.fc7. Does that work? tom -- Tom London From romal at gmx.de Sun Jan 7 18:53:20 2007 From: romal at gmx.de (Robert M. Albrecht) Date: Sun, 07 Jan 2007 19:53:20 +0100 Subject: system-config-display crashing In-Reply-To: <1168116831.10335.6.camel@aglarond.local> References: <1168101188341636.0.ktmail6@ktmail6> <1168102201.2566.1.camel@localhost.localdomain> <20070106181341.GB17733@mail.harddata.com> <1168116831.10335.6.camel@aglarond.local> Message-ID: <45A141A0.3000806@gmx.de> Hi, thanks, that fixed the glibc-bug for me. Now the tool does seem to have another problem. cu romal [root at helios ~]# system-config-display Traceback (most recent call last): File "/usr/share/system-config-display/xconf.py", line 311, in hardware_state = XF86HardwareState(xconfig) File "/usr/lib/python2.5/site-packages/rhpxl/xhwstate.py", line 177, in __init__ self.init_from_xconfig(xconfig) File "/usr/lib/python2.5/site-packages/rhpxl/xhwstate.py", line 296, in init_from_xconfig self.all_resolutions.sort (compare_resolution) File "/usr/lib/python2.5/site-packages/rhpxl/xhwstate.py", line 60, in compare_resolution (w1, h1) = resolution_from_string(res1) File "/usr/lib/python2.5/site-packages/rhpxl/xhwstate.py", line 49, in resolution_from_string (w, h) = string.split (res, "x") ValueError: need more than 1 value to unpack Jeremy Katz schrieb: > On Sat, 2007-01-06 at 11:13 -0700, Michal Jaegermann wrote: >> On Sun, Jan 07, 2007 at 01:50:01AM +0900, sangu wrote: >>> Please See : https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=212780 >> And also >> https://bugzillha.redhat.com/bugzilla/show_bug.cgi?id=220923 >> and I suspect that other similar ones can be found if you will >> carefuly search through bugzilla. > > Okay, I had enough time today to finally look into these. > > Prior to python 2.5, PyObject_{malloc,realloc,free} and > PyMem_{malloc,realloc,free} were essentially just defines to the system > level functions. With python 2.5, they instead do some other actions > that are different for each family of functions so that the memory usage > of the interpreter can drop at times.[1] Hence, inconsistent use ==> > segfaults. > > Fixed up libuser, newt and pyxf86config (which were the ones I could > find bugs on). > > Jeremy > > [1] http://docs.python.org/whatsnew/ports.html > From dwalsh at redhat.com Sun Jan 7 19:18:49 2007 From: dwalsh at redhat.com (Daniel Walsh) Date: Sun, 7 Jan 2007 14:18:49 -0500 Subject: Fedora Core 6 Test Update: selinux-policy-2.4.6-23.fc6 Message-ID: <200701071918.l07JIngo008917@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-016 2007-01-07 --------------------------------------------------------------------- Product : Fedora Core 6 Name : selinux-policy Version : 2.4.6 Release : 23.fc6 Summary : SELinux policy configuration Description : SELinux Reference Policy - modular. --------------------------------------------------------------------- * Fri Jan 5 2007 Dan Walsh 2.4.6-23 - Allow ssh access to the krb tickets - Allow sshd to change passwd - Stop newrole -l from working on non securetty Resolves: #200110 * Wed Jan 3 2007 Dan Walsh 2.4.6-22 - Fixes to run prelink in MLS machine Resolves: #221233 * Tue Jan 2 2007 Dan Walsh 2.4.6-21 - Allow spamassassin to read var_lib_t dir Resolves: #219234 * Fri Dec 29 2006 Dan Walsh 2.4.6-20 - fix mplayer to work under strict policy - Allow iptables to use nscd Resolves: #220794 * Thu Dec 28 2006 Dan Walsh 2.4.6-19 - Add gconf policy and make it work with strict * Sat Dec 23 2006 Dan Walsh 2.4.6-18 - Many fixes for strict policy and by extension mls. * Fri Dec 22 2006 Dan Walsh 2.4.6-17 - Fix to allow ftp to bind to ports > 1024 Resolves: #219349 * Tue Dec 19 2006 Dan Walsh 2.4.6-16 - Allow semanage to exec it self. Label genhomedircon as semanage_exec_t Resolves: #219421 - Allow sysadm_lpr_t to manage other print spool jobs Resolves: #220080 * Mon Dec 18 2006 Dan Walsh 2.4.6-15 - allow automount to setgid Resolves: #219999 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 1a411050cdf99723649aa8e5e5e12561a05ce7ea SRPMS/selinux-policy-2.4.6-23.fc6.src.rpm 1a411050cdf99723649aa8e5e5e12561a05ce7ea noarch/selinux-policy-2.4.6-23.fc6.src.rpm a100f61fcb723a2abcaf4e092c349ea075070e8b ppc/selinux-policy-targeted-2.4.6-23.fc6.noarch.rpm bab94fb56ec7888b9a75e5433de2961c748ca871 ppc/selinux-policy-2.4.6-23.fc6.noarch.rpm c3b87264a4d314289478ee583a412c9f3c4820e6 ppc/selinux-policy-mls-2.4.6-23.fc6.noarch.rpm 537a7e499fba4181ff964c4bad1ca7325c1798c2 ppc/selinux-policy-strict-2.4.6-23.fc6.noarch.rpm b6593922fc28af628a679bad5ef68c7440881aaa ppc/selinux-policy-devel-2.4.6-23.fc6.noarch.rpm a100f61fcb723a2abcaf4e092c349ea075070e8b x86_64/selinux-policy-targeted-2.4.6-23.fc6.noarch.rpm bab94fb56ec7888b9a75e5433de2961c748ca871 x86_64/selinux-policy-2.4.6-23.fc6.noarch.rpm c3b87264a4d314289478ee583a412c9f3c4820e6 x86_64/selinux-policy-mls-2.4.6-23.fc6.noarch.rpm 537a7e499fba4181ff964c4bad1ca7325c1798c2 x86_64/selinux-policy-strict-2.4.6-23.fc6.noarch.rpm b6593922fc28af628a679bad5ef68c7440881aaa x86_64/selinux-policy-devel-2.4.6-23.fc6.noarch.rpm a100f61fcb723a2abcaf4e092c349ea075070e8b i386/selinux-policy-targeted-2.4.6-23.fc6.noarch.rpm bab94fb56ec7888b9a75e5433de2961c748ca871 i386/selinux-policy-2.4.6-23.fc6.noarch.rpm c3b87264a4d314289478ee583a412c9f3c4820e6 i386/selinux-policy-mls-2.4.6-23.fc6.noarch.rpm 537a7e499fba4181ff964c4bad1ca7325c1798c2 i386/selinux-policy-strict-2.4.6-23.fc6.noarch.rpm b6593922fc28af628a679bad5ef68c7440881aaa i386/selinux-policy-devel-2.4.6-23.fc6.noarch.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From jakub at redhat.com Sun Jan 7 19:21:27 2007 From: jakub at redhat.com (Jakub Jelinek) Date: Sun, 7 Jan 2007 14:21:27 -0500 Subject: Fedora Core 6 Test Update: glibc-2.5-10.fc6 Message-ID: <200701071921.l07JLR5m009416@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-1488 2007-01-07 --------------------------------------------------------------------- Product : Fedora Core 6 Name : glibc Version : 2.5 Release : 10.fc6 Summary : The GNU libc libraries. Description : The glibc package contains standard libraries which are used by multiple programs on the system. In order to save disk space and memory, as well as to make upgrading easier, common system code is kept in one place and shared between programs. This particular package contains the most important sets of shared libraries: the standard C library and the standard math library. Without these two libraries, a Linux system will not function. --------------------------------------------------------------------- * Fri Jan 5 2007 Jakub Jelinek 2.5-10.fc6 - fix nss_compat +group handling (#220658) * Fri Dec 22 2006 Jakub Jelinek 2.5-9 - make sure pthread_kill doesn't return EINVAL even if the target thread exits in between pthread_kill ESRCH check and the actual tgkill syscall (#220420) * Tue Dec 19 2006 Jakub Jelinek 2.5-8 - fix setcontext on ppc32 (#219107) - fix wide stdio after setvbuf (#217064, BZ#2337) - fix {j,m}rand48{,_r} on 64-bit arches (BZ#3747) - handle power6x AT_PLATFORM (#216970) - fix a race condition in getXXbyYY_r (#219145) - fix tst-pselect testcase * Tue Dec 12 2006 Jakub Jelinek 2.5-7 - fix hasmntopt (#218802) - fix setusershell and getusershell (#218782) - strtod fixes (BZ#3664, BZ#3673, BZ#3674) - fix ttyname and ttyname_r with invalid file descriptor (#218276) - fix nis_getnames if the default domain doesn't contain at least two dots (#206483) - fix memusage with realloc (x, 0) * Wed Nov 29 2006 Jakub Jelinek 2.5-6 - fix svc_run (#216834, BZ#3559) - make sure there is consistent timestamp for /etc/ld.so.conf, /etc/localtime and /etc/rpc between multilib glibc rpms - fix :include: /etc/alias handling (#215572) - update powerpc-cpu add-on to version 0.4 (#196319) - add power6x subdir to /lib/ and /lib/rtkaio/, link all libs from ../power6/* into them - update nl, sv, pl and tr translations - add mai_IN locale (#213415) - fix es_ES LC_TIME (BZ#3320) * Tue Nov 14 2006 Jakub Jelinek 2.5-5 - remove bogus /usr/lib/librt.so.1 symlink (#213555) - fix memusage (#213656) - fix sysconf (_SC_LEVEL{2,3}_CACHE_SIZE) on Intel Core Duo CPUs - fix ld.so locking on dlopen failures (#213037, BZ#3429) - fix libthread_db.so on TLS_DTV_AT_TP architectures (#215513) - fix --inhibit-rpath (#214569) - fix _r_debug content when prelinked ld.so executes a program as its argument - handle new tzdata format to cope with year > 2037 transitions on 64-bit architectures - fix strxfrm - fix i?86 floor and ceil inlines (BZ#3451) * Thu Oct 19 2006 Jakub Jelinek 2.5-4 - fix i?86 6 argument syscalls (e.g. splice) - fix rtld minimal realloc (BZ#3352) - fix RFC3484 getaddrinfo sorting according to rules 4 and 7 (BZ#3369) - fix xdrmem_setpos (#211452) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 49ed34ce08b5c0e5d4c01da8b2bf7e5a97aba7f5 SRPMS/glibc-2.5-10.fc6.src.rpm 49ed34ce08b5c0e5d4c01da8b2bf7e5a97aba7f5 noarch/glibc-2.5-10.fc6.src.rpm 2f8aebb78b6f73d8ca63ec1a17312a49505c31c4 ppc/glibc-2.5-10.fc6.ppc.rpm 8600644460a99519af8d75b272950d957e109a2d ppc/glibc-common-2.5-10.fc6.ppc.rpm b90552d8fa18699e87143b0526cc757eb0e13e0e ppc/nscd-2.5-10.fc6.ppc.rpm f1051122944c75a78b2550b6e26016502157f870 ppc/debug/glibc-debuginfo-2.5-10.fc6.ppc.rpm 6a15eaf9e72798dd9ee999cb7cc446ac6d1f09ab ppc/glibc-headers-2.5-10.fc6.ppc.rpm 88440d16ff0ad3f9681f5d6d4196cbaca1c2c7fb ppc/glibc-utils-2.5-10.fc6.ppc.rpm 0d596cc6f825b8510595b570d7ca846a29190e0a ppc/glibc-devel-2.5-10.fc6.ppc.rpm bf4849eafd49ee9d60dcb657872ccb0a7741601b x86_64/glibc-common-2.5-10.fc6.x86_64.rpm 8528673ec1352d620bfa46cc4f862bc43538b2a2 x86_64/debug/glibc-debuginfo-2.5-10.fc6.x86_64.rpm 1d38f22cd1239bf6ff825df0529a49338f6dc418 x86_64/glibc-headers-2.5-10.fc6.x86_64.rpm a5f1640c97876ae633517031db7fcdc03ce84cc6 x86_64/glibc-2.5-10.fc6.x86_64.rpm d42dc9958570fe86fc51cb91d0752d036afcc7d9 x86_64/nscd-2.5-10.fc6.x86_64.rpm d397ecbf21eacf44231ab1afd05839a4dae5f7c6 x86_64/glibc-utils-2.5-10.fc6.x86_64.rpm 699fad8cda3d212322974deb5b555a427bed7147 x86_64/glibc-devel-2.5-10.fc6.x86_64.rpm 69984a99c01249f340d64744fa9b91445a9366b1 i386/nscd-2.5-10.fc6.i386.rpm d98556651633a8b09f869555f5d3906c7e7f67da i386/glibc-devel-2.5-10.fc6.i386.rpm 053ed779aea2231e5d5ed0e56955b919c5f0195b i386/glibc-utils-2.5-10.fc6.i386.rpm fe84221d58d43a6c9d1b9fae4f6bf85063aa2236 i386/glibc-2.5-10.fc6.i386.rpm 6bd78a069904b874ee38c6abc1687039198a47d8 i386/debug/glibc-debuginfo-2.5-10.fc6.i386.rpm 38955150f4c8d70e35dfa0a30fc00c554e1dbe25 i386/glibc-headers-2.5-10.fc6.i386.rpm 1d788f47445d9f5178a07730c14ae3facac25990 i386/glibc-common-2.5-10.fc6.i386.rpm 5f8652e70d3ad46df39a192086e77af5fbbfb372 i386/debug/glibc-debuginfo-common-2.5-10.fc6.i386.rpm d6bdd6e57a8e57f253414dc4ed2bd180790392c9 i386/glibc-2.5-10.fc6.i686.rpm 404cb6c856b64ade3412ca7e2c7596a56ceb4d64 i386/debug/glibc-debuginfo-2.5-10.fc6.i686.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From tibbs at math.uh.edu Sun Jan 7 19:23:44 2007 From: tibbs at math.uh.edu (Jason L Tibbitts III) Date: 07 Jan 2007 13:23:44 -0600 Subject: rawhide report: 20070106 changes In-Reply-To: <1168182063.3650.5.camel@T7.Linux> References: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> <1168129668.3702.7.camel@T7.Linux> <1168180089.32293.2.camel@soulcrusher.caolan.org> <1168180241.3650.2.camel@T7.Linux> <1168181397.8056.0.camel@soulcrusher.caolan.org> <1168182063.3650.5.camel@T7.Linux> Message-ID: >>>>> "P" == Paul writes: P> Drat. Only got 2.1.0-6.9 on in var/cache/yum. Don't suppose you P> could upload the x86_64 packages somewhere? Pretty please with P> beer? You could always check it out of CVS and build it. - J< From jakub at redhat.com Sun Jan 7 19:26:18 2007 From: jakub at redhat.com (Jakub Jelinek) Date: Sun, 7 Jan 2007 14:26:18 -0500 Subject: Fedora Core 6 Test Update: gcc-4.1.1-51.fc6 Message-ID: <200701071926.l07JQI3Y010026@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-1494 2007-01-07 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gcc Version : 4.1.1 Release : 51.fc6 Summary : Various compilers (C, C++, Objective-C, Java, ...) Description : The gcc package contains the GNU Compiler Collection version 4.1. You'll need this package in order to compile C code. --------------------------------------------------------------------- * Fri Jan 5 2007 Jakub Jelinek 4.1.1-51.fc6 - update from gcc-4_1-branch (-r120325:120507) - PRs c++/30382, middle-end/27826, middle-end/28116, tree-optimization/30212 * Thu Jan 4 2007 Jakub Jelinek 4.1.1-51 - fix complex division with -std=c99 or -std=gnu99 (PR c/30360) * Wed Jan 3 2007 Jakub Jelinek 4.1.1-50 - backwards compatibility with old layout of struct _Unwind_Context (#220627) - fix preprocessor defines in assembly preprocessed with -std=... (Steven Bosscher, PR c/25993) - fix PCH creation with templates (Jason Merrill, PR c++/28217) - fix dwarf2out ICE (Alexandre Oliva, #217529, PR debug/30189) * Tue Jan 2 2007 Jakub Jelinek 4.1.1-49 - update from gcc-4_1-branch (-r120062:120325) - PRs debug/26964, fortran/30200, libfortran/30145 - fix endless recursion in negate_expr/fold_unary (PR middle-end/30286) - fix cpp problem on empty source files (Tom Tromey, PR preprocessor/30001) - improve constructor disambiguation (Mark Mitchell, PR c++/28261, PR c++/29535) - fix handling of non-NULL attribute on nested functions (Andrew Pinski, PR tree-opt/30045) - fix ICE with friend templatized static member function (PR c++/29054) * Wed Dec 20 2006 Jakub Jelinek 4.1.1-48 - update from gcc-4_1-branch (-r119833:120062) - PRs libstdc++/11953 - fix ia64 EH region boundaries where last br.call in the region is not at the end of a bundle (#219596, PR target/30230) - fix DI resp. TImode __sync_*_compare_and_swap on i?86 resp. x86_64 (Kazu Hirata, #220258, PR target/27266) - fix asm vs. nested functions or OpenMP (#220250, PRs middle-end/30262, middle-end/30263) - fix handling of complex shared OpenMP vars (Andrew Pinski, PR middle-end/30143) * Thu Dec 14 2006 Jakub Jelinek 4.1.1-47 - fix ia64 prologue generation (Andreas Schwab, #219594, PR target/29166) - fix ppc64 divdi3 (PR target/30185) * Wed Dec 13 2006 Jakub Jelinek 4.1.1-46 - update from gcc-4_1-branch (-r119654:119833) - PRs c++/27316, c++/28740, c++/29732, fortran/29820, fortran/29821, fortran/29912, fortran/29916, fortran/30003, libstdc++/26497, libstdc++/28125, libstdc++/28265, target/30039 - fix loop unswitching (Zdenek Dvorak, #219138, PR rtl-optimization/30113) * Fri Dec 8 2006 Jakub Jelinek 4.1.1-45 - update from gcc-4_1-branch (-r119343:119654) - PRs c++/14329, c++/28284, c++/29632, c++/29728, c++/29729, c++/29730, c++/29733, c++/30022, libfortran/29810 - add protoize.1 and unprotoize.1 man pages (#188914) - fix RTL sharing problem in combine (#218603, PR rtl-optimization/27761) - additions to libgcj-src (Ben Konrath, PR libgcj/30110) * Fri Dec 1 2006 Jakub Jelinek 4.1.1-44 - fix OpenMP loops with 0 iterations (PR libgomp/29947) * Thu Nov 30 2006 Jakub Jelinek 4.1.1-43 - update from gcc-4_1-branch (-r119167:119343) - PRs c++/29022, fortran/29391, fortran/29489, fortran/29982, libgfortran/29936, target/29319, tree-opt/29964 - fix -fopenmp ICEs on omp constructs where the body never returns (PR middle-end/29965) * Fri Nov 24 2006 Jakub Jelinek 4.1.1-42 - update from gcc-4_1-branch (-r119021:119167) - fix s390{,x} __sync_* builtins - fix ppc64 libffi unwind info * Thu Nov 23 2006 Jakub Jelinek 4.1.1-41 - fix ICE with -fopenmp -fexceptions on ia64 (#216988, PR c/29955) - fix parsing of C++ if/switch/etc. conditions (PR c++/29886) * Wed Nov 22 2006 Jakub Jelinek 4.1.1-40 - disallow multiple vector_size attributes (PR c/29736) - don't ICE on main returning int with vector_size attribute (PR c++/29735) - hide symbols that shouldn't be exported from libgcj.so (GC_*, ffi_*, lt_* etc., #216120) * Mon Nov 20 2006 Jakub Jelinek 4.1.1-39 - update from gcc-4_1-branch (-r118891:119021) - PRs middle-end/26306, middle-end/29753, target/18553, target/29114, target/29449, tree-opt/29788, tree-optimization/28888 - fix some C++ vector conversions (PR c++/29734) - fix C++ ICE with value dependent const brace enclosed initializer (PR c++/29570) * Thu Nov 16 2006 Jakub Jelinek 4.1.1-38 - update from gcc-4_1-branch (-r118805:118891) - PRs rtl-optimization/29797 - fix forwprop switch optimization (PR middle-end/29584) - remove old *34* provides (#215839) * Tue Nov 14 2006 Jakub Jelinek 4.1.1-37 - fix up check_effective_target_fopenmp tcl test for the testsuite framework backport changes * Tue Nov 14 2006 Jakub Jelinek 4.1.1-36 - update from gcc-4_1-branch (-r118571:118805) - PRs c++/29106, c++/29518, fortran/24518, fortran/29216, fortran/29314, fortran/29371, fortran/29387, fortran/29392, fortran/29490, fortran/29565, fortran/29630, fortran/29679, fortran/29713, middle-end/21032, testsuite/28703, tree-opt/28545 - honor initial conditions and variable types in conversion to perfect nesting for -ftree-loop-linear optimizations (#209297, PR tree-optimization/29581) * Sat Nov 11 2006 Jakub Jelinek 4.1.1-35 - fix libgcj_bc.so dummy lib on i?86/x86_64/ia64/s390/s390x * Sat Nov 11 2006 Jakub Jelinek 4.1.1-34 - fix libgcj_bc.so symlink and dummy lib placement to avoid 64-bit gcc-java requiring 32-bit libc or vice versa - fix ICE on Fortran !$omp continued line followed by !$ conditional line (PR fortran/29759) * Wed Nov 8 2006 Jakub Jelinek 4.1.1-33 - update from gcc-4_1-branch (-r118468:118571) - PRs fortran/24398, fortran/27701, fortran/29098, fortran/29115, fortran/29211, fortran/29232, fortran/29364, fortran/29373, fortran/29407, libfortran/29627, tree-optimization/29610 - fix java.net.SocketPermission (Gary Benson, #212739) - fix java.util.regex.Matcher (Ito Kazumitsu, #183698, PR classpath/29703) - fix # handling in libcpp when switching from system header to non-system header or main source (PR preprocessor/29612) - fix gcc configury detection of ld COMDAT support - move *.so symlinks from libgcj-devel to gcc-java (#214195) * Sat Nov 4 2006 Jakub Jelinek 4.1.1-32 - update from gcc-4_1-branch (-r118025:118468) - PRs bootstrap/28400, fortran/29067, libgfortran/29563, middle-end/29250, rtl-optimization/28970, rtl-optimization/29631, target/29377, tree-optimization/27891 - fix infinite recursion in make_vector_type (#212848, PR tree-optimization/29637) - merge gomp fixes from the trunk (-r118133:118134) - PR fortran/29629 - fix A < 0 ? : 0 optimization (#213821, PR middle-end/29695) - fix ICE in gfc_get_derived_type (Paul Thomas, #212936, PR fortran/29641) * Wed Oct 25 2006 Jakub Jelinek 4.1.1-31 - update from gcc-4_1-branch (-r117629:118025) - PRs c++/20647, c++/25878, c++/26884, c++/27787, c++/28506, c++/28906, c++/29020, c++/29175, c++/29318, c++/29408, c++/29435, c/27184, c/29092, fortran/25091, fortran/25092, fortran/29284, fortran/29321, fortran/29322, fortran/29393, fortran/29403, gcov/profile/26570, inline-asm/29119, middle-end/20491, rtl-optimization/29323, target/25519, target/28825, target/28960, target/29300, testsuite/28829, tree-optimization/26969 - fix libstdc++.so backwards compatibility with GCC 3.4.x (#210452) - fix always_inline attribute at -O0 (Jan Hubicka, PR middle-end/29241) - fix function local static vars with used attribute (Jan Hubicka, Richard Guenther, PR middle-end/29299) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ be376157bedfbbe4fe5e488acae02d9a7fd9313d SRPMS/gcc-4.1.1-51.fc6.src.rpm be376157bedfbbe4fe5e488acae02d9a7fd9313d noarch/gcc-4.1.1-51.fc6.src.rpm d81784ee62e1ca35ff1b1773bb3347a4ef2fbabb ppc/libgcj-4.1.1-51.fc6.ppc.rpm 7f37c33501729cc41d77328013b9fb9dfffcdb41 ppc/libgcj-devel-4.1.1-51.fc6.ppc.rpm 1d50227eba094022c885035fc494bcb0c16ecff8 ppc/gcc-4.1.1-51.fc6.ppc.rpm cf80533af128977503d0c77db3b5d982d178cfe5 ppc/libgomp-4.1.1-51.fc6.ppc.rpm 4a7eb152e0a1d8c0ae1b0d97b10f1422ff447d8f ppc/libstdc++-4.1.1-51.fc6.ppc.rpm 298d9337508fd6efcd8a0aee2bd2382f22406f42 ppc/gcc-java-4.1.1-51.fc6.ppc.rpm bc09fa59a31f961a32b57cc017b8241d4eea7bbe ppc/libmudflap-4.1.1-51.fc6.ppc.rpm 40a6496f9a7f0da515864c878c781ccb23e8f623 ppc/gcc-c++-4.1.1-51.fc6.ppc.rpm 0a73e76936f2e48de928d06cb786745336323941 ppc/libgcc-4.1.1-51.fc6.ppc.rpm 168187f2c6e6fe93e4cf6bac537bbdc3de1e9ee2 ppc/libstdc++-devel-4.1.1-51.fc6.ppc.rpm e856012e375ccb59368c7e43570d7dff30b02554 ppc/libobjc-4.1.1-51.fc6.ppc.rpm 44f7089d817548d7fea3af948eec566879bebb8d ppc/libgfortran-4.1.1-51.fc6.ppc.rpm b30bad762326d2bc2ea849c9a850f021ae7e5224 ppc/debug/gcc-debuginfo-4.1.1-51.fc6.ppc.rpm 9bdce64dfdb37e114530418de51835d4552469f2 ppc/gcc-objc++-4.1.1-51.fc6.ppc.rpm 7c2dc2f6612f0aacb6671f0fbf1be5bde2df84c8 ppc/libmudflap-devel-4.1.1-51.fc6.ppc.rpm 43bed70ea9aa252afe1ab7aebd8ae90142f2b670 ppc/libgcj-src-4.1.1-51.fc6.ppc.rpm a75a0f17bbde28b96f8e9a9e9d2d367cd5aa25ed ppc/gcc-gfortran-4.1.1-51.fc6.ppc.rpm 9802e4852183f2b4576cc155551c40a930ebc613 ppc/cpp-4.1.1-51.fc6.ppc.rpm 7e71194526f1c59168a53199a549b5dc063c9421 ppc/gcc-objc-4.1.1-51.fc6.ppc.rpm 77ac01c1a84f44b7a60cf0de935bf0e0eddfc0f6 x86_64/libgcj-devel-4.1.1-51.fc6.x86_64.rpm c4b98d9230565ca050fb5dcf2dd74fd823038ea9 x86_64/libstdc++-4.1.1-51.fc6.x86_64.rpm 8666ceecd5c018bafcd546d8c352f067e7ab1787 x86_64/gcc-4.1.1-51.fc6.x86_64.rpm 6ace397fa395b2c900d27777ee9d5834ddc520a0 x86_64/libgcj-src-4.1.1-51.fc6.x86_64.rpm c0a2a1de18ac3233bf0bfac6ab979008e4ce7594 x86_64/gcc-java-4.1.1-51.fc6.x86_64.rpm 20262f2bb368917df69429dbfc99ca5781019b1d x86_64/libgnat-4.1.1-51.fc6.x86_64.rpm 3c4950dd867a718d4f2d0973f8ee5dd370e89dc8 x86_64/libgcj-4.1.1-51.fc6.x86_64.rpm e4ea8182a4ec248c814ad5ca8d3ab919ac138fba x86_64/gcc-objc++-4.1.1-51.fc6.x86_64.rpm 048793c1bd52a80364887994a20f277c59652152 x86_64/libgfortran-4.1.1-51.fc6.x86_64.rpm c8a0ff464f98a44a99343d7402c3e59b3963ca64 x86_64/gcc-gnat-4.1.1-51.fc6.x86_64.rpm e3872cbb3a7308aab06400532c29bcf0da301d2a x86_64/gcc-c++-4.1.1-51.fc6.x86_64.rpm 9fe4e25ccc78b1f39de8e9e1138e26b6eca4902c x86_64/debug/gcc-debuginfo-4.1.1-51.fc6.x86_64.rpm 85d7d3cc58ecdb2b08a1bb5feca895623e4fede5 x86_64/libstdc++-devel-4.1.1-51.fc6.x86_64.rpm 6bf03c2bf264209d92f3ae80b3ab1c2ff1b71c34 x86_64/libgcc-4.1.1-51.fc6.x86_64.rpm f1caf7c39d05d45c50e476d53ad692171d3b7e3a x86_64/libobjc-4.1.1-51.fc6.x86_64.rpm b6fbc372a6d770e73f0cf4b9aa64b6aee4b4dfb1 x86_64/gcc-objc-4.1.1-51.fc6.x86_64.rpm dd34cd46c2fbb475c2297358bb780c3c140bfb94 x86_64/cpp-4.1.1-51.fc6.x86_64.rpm 28c881bf6dfc69ecfeed17c08b061f9aebb085ca x86_64/gcc-gfortran-4.1.1-51.fc6.x86_64.rpm 8f22092833385f5f660706096d8dfca863dd52ac x86_64/libmudflap-4.1.1-51.fc6.x86_64.rpm 4dc544cd9349ee67cbbcee565639bbeae41e7463 x86_64/libgomp-4.1.1-51.fc6.x86_64.rpm 6807e559ab16e8f38929a53d52c872e0cde9eaa8 x86_64/libmudflap-devel-4.1.1-51.fc6.x86_64.rpm e1528a7ab80ce3e02fce72ec2443ccc2334b0212 i386/gcc-objc-4.1.1-51.fc6.i386.rpm 369947cb712482e62d86752c15f75d8d6ae8dc3c i386/gcc-objc++-4.1.1-51.fc6.i386.rpm ba329cd17ed58c355648fbdb918e3c19a1e971f2 i386/libstdc++-devel-4.1.1-51.fc6.i386.rpm 9d4e6aadd504ef4b52bdfd2df5dd74b7dca2be22 i386/libgfortran-4.1.1-51.fc6.i386.rpm 4dfd282145307e3ec58e67da6024e83cafe3aaab i386/libgomp-4.1.1-51.fc6.i386.rpm 5702f9f1b4d620eea83fa7119e320fe2f00aa52a i386/libstdc++-4.1.1-51.fc6.i386.rpm 2f4c314218b74da4478085a16910f74873d42026 i386/gcc-gfortran-4.1.1-51.fc6.i386.rpm d7dbd5f083d57d843e7676119efa69d6e956b64b i386/gcc-4.1.1-51.fc6.i386.rpm 3465e89e61618587ffdbdf12491d40ca45277fac i386/libgcj-src-4.1.1-51.fc6.i386.rpm a4edaac7503173e445babe0516954d8e9eea1d70 i386/gcc-gnat-4.1.1-51.fc6.i386.rpm c3d29ee8ca52ebe9d95b4fe637c5cad454056c1c i386/debug/gcc-debuginfo-4.1.1-51.fc6.i386.rpm d85470dc42ffcf2676a2d532f35ca775f16cafb7 i386/libmudflap-4.1.1-51.fc6.i386.rpm a8ec611fc6d11bd7d20e3a8c64e35d3b93394126 i386/libgnat-4.1.1-51.fc6.i386.rpm c7df7cc33f22fa9aef103ca65f0599bf599ca903 i386/cpp-4.1.1-51.fc6.i386.rpm 571a68c004b43c28cf7b43693ef5d32ea36d921e i386/gcc-java-4.1.1-51.fc6.i386.rpm e2b4db2258bc2a98d09672605e9ff008bd54f59e i386/gcc-c++-4.1.1-51.fc6.i386.rpm e42934ef821c95c1d0e072a7b88037e420cef732 i386/libgcc-4.1.1-51.fc6.i386.rpm ed25c0d12eb0e89ebd89098ca6218f34184e600c i386/libgcj-4.1.1-51.fc6.i386.rpm 8376171673ac670f60743e09b3fa6b9cbc9af140 i386/libobjc-4.1.1-51.fc6.i386.rpm 36abe306843974c33bb621a4cbc8989f04db9ad4 i386/libmudflap-devel-4.1.1-51.fc6.i386.rpm 4591f3ebb6ec4f8334839ef521a13de72a9842d9 i386/libgcj-devel-4.1.1-51.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From moshe at runslinux.net Sun Jan 7 19:50:17 2007 From: moshe at runslinux.net (Moshe Jacobson) Date: Sun, 7 Jan 2007 14:50:17 -0500 Subject: rawhide report: 20070106 changes In-Reply-To: <200701061126.l06BQKq6029123@hs20-bc2-6.build.redhat.com> References: <200701061126.l06BQKq6029123@hs20-bc2-6.build.redhat.com> Message-ID: <358a1cd50701071150r69809d48o42a5108ada4ffaea@mail.gmail.com> On 1/6/07, buildsys at redhat.com wrote: > > openoffice.org-1:2.1.0-6.10 > --------------------------- > * Wed Jan 03 2007 Caolan McNamara - 1:2.1.0-6.10 > - Resolves: rhbz#216094 add workspace.impress115.patch > Unlike the others, I'm having problems on my 32-bit machine. Anytime I try to save a document from an openoffice app, the whole app just stops responding altogether. Is this happening for anyone else? Running: kernel-2.6.18-1.2849.fc6 openoffice.org-core-2.1.0-6.10 Thanks, Moshe -------------- next part -------------- An HTML attachment was scrubbed... URL: From paul at all-the-johnsons.co.uk Sun Jan 7 20:38:18 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Sun, 07 Jan 2007 20:38:18 +0000 Subject: rawhide report: 20070106 changes In-Reply-To: References: <200701062359.l06Nx83k012516@laptop13.inf.utfsm.cl> <1168129668.3702.7.camel@T7.Linux> <1168180089.32293.2.camel@soulcrusher.caolan.org> <1168180241.3650.2.camel@T7.Linux> <1168181397.8056.0.camel@soulcrusher.caolan.org> <1168182063.3650.5.camel@T7.Linux> Message-ID: <1168202298.3650.9.camel@T7.Linux> Hi, > P> Drat. Only got 2.1.0-6.9 on in var/cache/yum. Don't suppose you > P> could upload the x86_64 packages somewhere? Pretty please with > P> beer? > > You could always check it out of CVS and build it. The fix will probably appear quicker than me rebuilding it on this box... ;-) TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From paul at all-the-johnsons.co.uk Sun Jan 7 20:39:50 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Sun, 07 Jan 2007 20:39:50 +0000 Subject: rawhide report: 20070106 changes In-Reply-To: <358a1cd50701071150r69809d48o42a5108ada4ffaea@mail.gmail.com> References: <200701061126.l06BQKq6029123@hs20-bc2-6.build.redhat.com> <358a1cd50701071150r69809d48o42a5108ada4ffaea@mail.gmail.com> Message-ID: <1168202390.3650.11.camel@T7.Linux> On Sun, 2007-01-07 at 14:50 -0500, Moshe Jacobson wrote: > On 1/6/07, buildsys at redhat.com wrote: > openoffice.org-1:2.1.0-6.10 > --------------------------- > * Wed Jan 03 2007 Caolan McNamara - > 1:2.1.0-6.10 > - Resolves: rhbz#216094 add workspace.impress115.patch > > Unlike the others, I'm having problems on my 32-bit machine. Anytime > I try to save a document from an openoffice app, the whole app just > stops responding altogether. Is this happening for anyone else? > > Running: > kernel-2.6.18-1.2849.fc6 > openoffice.org-core-2.1.0-6.10 Why the old kernel? Are you not running rawhide? Personally, I'd save the throwback and submit it to BZ. If it's the same as the current problem, C will flag it. By the sounds of it, it's not. TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From fct-cornette at insight.rr.com Sun Jan 7 21:01:09 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Sun, 07 Jan 2007 16:01:09 -0500 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <20070107164343.GA3884@mail.harddata.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> Message-ID: <45A15F95.5060906@insight.rr.com> Michal Jaegermann wrote: > On Sat, Jan 06, 2007 at 10:40:51PM -0500, Jim Cornette wrote: >> The most recent problem is with system-config-lvm. If you exit the >> program I end up getting bug buddy collecting information for a bug report. >> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221739 > > That one happens to be a duplicate of > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221539 > but you definitely got much more interesting traces from bug-buddy. > I will leave to Jim Parsons which of these two he wants to track. I'll check out the reference for comparison. > >> Anyway, another question is for s-c-lvm, there is no debuginfo package >> when I tried to install the package for debugging purposes. Is there a >> package for this program? > > s-c-lvm is really a pile of Python scripts so this package is > its own source :-) and there is no other symbolic information which > debuggers could use. All the info you need and can get you > already installed. > > Michal > Alright, I'll just make due with the information that I was able to collect. If there are only scripts, it should be up to the developer to decypher. Related to the problem with gnucash, I tried out exiting the program and bug buddy mailed this bug report upstream. At least this problem is easier to resolve than having to win a game in order to reproduce the bug. Here is the link to the new bug report for gnucash.. http://bugzilla.gnome.org/show_bug.cgi?id=394024 Jim -- system has been recalled From fct-cornette at insight.rr.com Sun Jan 7 21:18:40 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Sun, 07 Jan 2007 16:18:40 -0500 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> Message-ID: <45A163B0.5030303@insight.rr.com> Tom London wrote: > On 1/7/07, Michal Jaegermann wrote: >> On Sat, Jan 06, 2007 at 10:40:51PM -0500, Jim Cornette wrote: >> > I seem to have 'worked around' some similar 'bug buddy reports' by > reverting ORBit2 and ORBit2-devel to 2.14.3-4.fc7. > > Does that work? If you upgraded ORBit2 up to the latest version, do the crashes start up again? Did you make a report against ORBit2? All packages are current as to what is available in rawhide. Jim > > tom -- Chicago law prohibits eating in a place that is on fire. From selinux at gmail.com Sun Jan 7 22:24:46 2007 From: selinux at gmail.com (Tom London) Date: Sun, 7 Jan 2007 14:24:46 -0800 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <45A163B0.5030303@insight.rr.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> <45A163B0.5030303@insight.rr.com> Message-ID: <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> On 1/7/07, Jim Cornette wrote: > Tom London wrote: > > On 1/7/07, Michal Jaegermann wrote: > >> On Sat, Jan 06, 2007 at 10:40:51PM -0500, Jim Cornette wrote: > >> > > I seem to have 'worked around' some similar 'bug buddy reports' by > > reverting ORBit2 and ORBit2-devel to 2.14.3-4.fc7. > > > > Does that work? > > If you upgraded ORBit2 up to the latest version, do the crashes start up > again? Did you make a report against ORBit2? > > All packages are current as to what is available in rawhide. > > Jim I filed several reports upstream. At least one issue (with at-spi) has a patch listed at bugzilla.gnome.org, so I figured a downstream fix was in the works. Yes, if I upgrade to latest ORBit2 packages, I start seeing failures again (I tried this morning and got a failure with at-spi). [Original BZ reported here: http://bugzilla.gnome.org/show_bug.cgi?id=390362 ]. Reverting to older ORBit2 packages 'cures'. BZ'd locally here: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221778 tom Tom London From cra at WPI.EDU Sun Jan 7 22:42:43 2007 From: cra at WPI.EDU (Chuck Anderson) Date: Sun, 7 Jan 2007 17:42:43 -0500 Subject: virt-manager memory leak? In-Reply-To: <20070103162412.GH3067@redhat.com> References: <20070102190137.GA3822@angus.ind.WPI.EDU> <20070103005653.GA3260@redhat.com> <20070103150157.GB18280@angus.ind.WPI.EDU> <20070103162412.GH3067@redhat.com> Message-ID: <20070107224243.GC29345@angus.ind.WPI.EDU> On Wed, Jan 03, 2007 at 04:24:12PM +0000, Daniel P. Berrange wrote: > On Wed, Jan 03, 2007 at 10:01:57AM -0500, Chuck Anderson wrote: > > On Wed, Jan 03, 2007 at 12:56:53AM +0000, Daniel P. Berrange wrote: > > > On Tue, Jan 02, 2007 at 02:01:37PM -0500, Chuck Anderson wrote: > > > > Has anyone noticed a memory leak in virt-manager? I have an FC6 host > > > > with an FC6 guest, running virt-manager with graphical and serial > > > > consoles on the guest. I left this running since Dec 27 and when I > > > > got back today the virt-manager python process was using 1.3 Gig > > > > resident RAM. > > > > > > Yes, there was a memory leak in one API call in libvirt, but I believe > > > the latest Fedora errata should have already fixed them. What RPM > > > versions of libvirt & virt-manager have you got installed ? > > > > virt-manager-0.2.6-3.fc6 > > libvirt-0.1.10-1.fc6 > > Ok, those are the latest releases, so could you file a bugzilla ticket > about the problem. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221780 From bloch at verdurin.com Sun Jan 7 22:55:59 2007 From: bloch at verdurin.com (bloch at verdurin.com) Date: Sun, 7 Jan 2007 22:55:59 +0000 Subject: Fedora Core 6 Test Update: yum-3.0.2-1.fc6 In-Reply-To: <200701032056.l03KuSoR032742@int-mx1.corp.redhat.com> References: <200701032056.l03KuSoR032742@int-mx1.corp.redhat.com> Message-ID: <20070107225559.GE1076@bloch.config> On Wed, 03 Jan 2007, Jeremy Katz wrote: > --------------------------------------------------------------------- > Fedora Test Update Notification > FEDORA-2007-006 > 2007-01-03 > --------------------------------------------------------------------- > > Product : Fedora Core 6 > Name : yum > Version : 3.0.2 > Release : 1.fc6 > Summary : RPM installer/updater > Description : > Yum is a utility that can check for and automatically download and > install updated RPM packages. Dependencies are obtained and downloaded > automatically prompting the user as necessary. > > --------------------------------------------------------------------- > Update Information: > > This update fixes a number of bugs in yum. With this update I'm still finding that yum-updatesd sometimes blocks manual invocations of yum. From dtimms at iinet.net.au Mon Jan 8 01:44:47 2007 From: dtimms at iinet.net.au (dtimms at iinet.net.au) Date: Mon, 8 Jan 2007 10:44:47 +0900 Subject: vmware guest crash spinlock lockup - bugzilla-able ? Message-ID: <1168220687.45a1a20f6ed66@mail.iinet.net.au> Hi, I have some machines: pc1: dell sc430 , 1GB, raid 1 software, intel x86_64 kernel pc2: shuttle xcube, 1GB, raid 1 software, intel i686 kernel os1+2: fc6 +updated 2007-01-04, vmware-server-1.0.1 Both machines run two vmware-guests: 1: fc6 +updated 2007-01-04, samba server, winbind 2: fc6 +updated 2007-01-04, dns, dhcp, openldap. All real and guest vms are running kernel-2.6.18-1.2868.fc6 #1 SMP After about 48 hours, pc1-vm1 crashed, restarted and still OK. 3 days. Today I have found that pc2-vm1 and pc2-vm2 have crashed. Message left on pc2:vm2 screen summary: worker_thread kthread kthread kernel_thread ===== BUG: spinlock lockup on CPU#0, modprobe/13636 (Not tainted) dump_trace show_trace_log_lvl show_trace dump_stack _raw_spin_lock cache_alloc_refill kmem_cache_alloc get_empty_filp __path_lookup_open open_name do_filp_open do_sys_open sys_open syscall_call DWARF2 unwinder stuck at syscall_call Leftover inexact backtrace: ===== the visible part of the trace with the other vm is different, but mentions the same spinlock and DWARF messages. The server and vm guests have quite a few services either disabled or removed, to reduce overall machine load. Is this an issue that needs to be reported to bugzilla.redhat ? Or is there another bug report location that would be best. DaveT. From fct-cornette at insight.rr.com Mon Jan 8 02:27:57 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Sun, 07 Jan 2007 21:27:57 -0500 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> <45A163B0.5030303@insight.rr.com> <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> Message-ID: <45A1AC2D.5000504@insight.rr.com> Tom London wrote: > On 1/7/07, Jim Cornette wrote: >> Tom London wrote: >> > On 1/7/07, Michal Jaegermann wrote: >> >> On Sat, Jan 06, 2007 at 10:40:51PM -0500, Jim Cornette wrote: >> >> >> > I seem to have 'worked around' some similar 'bug buddy reports' by >> > reverting ORBit2 and ORBit2-devel to 2.14.3-4.fc7. >> > >> > Does that work? >> >> If you upgraded ORBit2 up to the latest version, do the crashes start up >> again? Did you make a report against ORBit2? > > I filed several reports upstream. > > At least one issue (with at-spi) has a patch listed at > bugzilla.gnome.org, so I figured a downstream fix was in the works. > > Yes, if I upgrade to latest ORBit2 packages, I start seeing failures > again (I tried this morning and got a failure with at-spi). [Original > BZ reported here: http://bugzilla.gnome.org/show_bug.cgi?id=390362 ]. > Reverting to older ORBit2 packages 'cures'. > > BZ'd locally here: > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=221778 > > tom > Tom London > Thanks for the leads. I was wondering if the other reports filed should reference depending upon ORBit2 and this bug number if downgrading ORBits2 stops the crashing? Jim -- Experience is what you get when you were expecting something else. From jkeating at redhat.com Mon Jan 8 03:01:14 2007 From: jkeating at redhat.com (Jesse Keating) Date: Sun, 7 Jan 2007 22:01:14 -0500 Subject: Fedora Core 6 Test Update: yum-3.0.2-1.fc6 In-Reply-To: <20070107225559.GE1076@bloch.config> References: <200701032056.l03KuSoR032742@int-mx1.corp.redhat.com> <20070107225559.GE1076@bloch.config> Message-ID: <200701072201.14561.jkeating@redhat.com> On Sunday 07 January 2007 17:55, bloch at verdurin.com wrote: > With this update I'm still finding that yum-updatesd sometimes blocks > manual invocations of yum. Well, you can only have one copy of yum running at a time, I don't think this update was going to attempt to do anything different with that. yum-updatesd is running a copy of yum, thus no other copies can run. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From tla at rasmil.dk Mon Jan 8 09:30:58 2007 From: tla at rasmil.dk (Tim Lauridsen) Date: Mon, 08 Jan 2007 10:30:58 +0100 Subject: Fedora Core 6 Test Update: yum-3.0.2-1.fc6 In-Reply-To: <20070107225559.GE1076@bloch.config> References: <200701032056.l03KuSoR032742@int-mx1.corp.redhat.com> <20070107225559.GE1076@bloch.config> Message-ID: <45A20F52.50101@rasmil.dk> bloch at verdurin.com wrote: > On Wed, 03 Jan 2007, Jeremy Katz wrote: > > >> --------------------------------------------------------------------- >> Fedora Test Update Notification >> FEDORA-2007-006 >> 2007-01-03 >> --------------------------------------------------------------------- >> >> Product : Fedora Core 6 >> Name : yum >> Version : 3.0.2 >> Release : 1.fc6 >> Summary : RPM installer/updater >> Description : >> Yum is a utility that can check for and automatically download and >> install updated RPM packages. Dependencies are obtained and downloaded >> automatically prompting the user as necessary. >> >> --------------------------------------------------------------------- >> Update Information: >> >> This update fixes a number of bugs in yum. >> > > With this update I'm still finding that yum-updatesd sometimes blocks > manual invocations of yum. > > There is a problem with yum 3.0.2, it take very long time to initialize updates, so yum-updated will take much longer to run and block other invocations of yum. This is fixed upstream in yum 3.0.3, just released. I'm sure there soon will be a new release for FC6. Tim -------------- next part -------------- An HTML attachment was scrubbed... URL: From buildsys at redhat.com Mon Jan 8 11:13:11 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Mon, 8 Jan 2007 06:13:11 -0500 Subject: rawhide report: 20070108 changes Message-ID: <200701081113.l08BDBtT029997@hs20-bc2-6.build.redhat.com> Updated Packages: gnome-python2-2.17.1-1.fc7 -------------------------- * Sun Jan 07 2007 Matthew Barnes - 2.17.1-1 - Update to 2.17.1 gnome-python2-desktop-2.17.2-1.fc7 ---------------------------------- * Sun Jan 07 2007 Matthew Barnes - 2.17.2-1 - Update to 2.17.2 - New gnome-python2-bugbuddy subpackage. - Update version requirements to match configure.ac. - Use python_sitearch macro for installing libraries. kernel-2.6.19-1.2906.fc7 ------------------------ * Sun Jan 07 2007 Dave Jones - 2.6.20rc4 Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From selinux at gmail.com Mon Jan 8 14:38:05 2007 From: selinux at gmail.com (Tom London) Date: Mon, 8 Jan 2007 06:38:05 -0800 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <45A1AC2D.5000504@insight.rr.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> <45A163B0.5030303@insight.rr.com> <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> <45A1AC2D.5000504@insight.rr.com> Message-ID: <4c4ba1530701080638k386f8e98v67bf26d988eb9769@mail.gmail.com> On 1/7/07, Jim Cornette wrote: > > Thanks for the leads. I was wondering if the other reports filed should > reference depending upon ORBit2 and this bug number if downgrading > ORBits2 stops the crashing? > > Jim I would think so.... couldn't hurt. I'm not sure there is actually a problem with ORBit2 or if the API changed a bit between versions (requiring changes to calling apps) or if ... The 'marker' for me was that ORBit2 routines were always a few calls down from the the top of the bug buddy stack trace. tom -- Tom London From ajackson at redhat.com Mon Jan 8 16:56:13 2007 From: ajackson at redhat.com (Adam Jackson) Date: Mon, 08 Jan 2007 11:56:13 -0500 Subject: system-config-display crashing In-Reply-To: <45A141A0.3000806@gmx.de> References: <1168101188341636.0.ktmail6@ktmail6> <1168102201.2566.1.camel@localhost.localdomain> <20070106181341.GB17733@mail.harddata.com> <1168116831.10335.6.camel@aglarond.local> <45A141A0.3000806@gmx.de> Message-ID: <1168275373.7683.601.camel@localhost.localdomain> On Sun, 2007-01-07 at 19:53 +0100, Robert M. Albrecht wrote: > Hi, > > thanks, that fixed the glibc-bug for me. > > Now the tool does seem to have another problem. > > cu romal > > [root at helios ~]# system-config-display > Traceback (most recent call last): > File "/usr/share/system-config-display/xconf.py", line 311, in > hardware_state = XF86HardwareState(xconfig) > File "/usr/lib/python2.5/site-packages/rhpxl/xhwstate.py", line 177, > in __init__ > self.init_from_xconfig(xconfig) > File "/usr/lib/python2.5/site-packages/rhpxl/xhwstate.py", line 296, > in init_from_xconfig > self.all_resolutions.sort (compare_resolution) > File "/usr/lib/python2.5/site-packages/rhpxl/xhwstate.py", line 60, > in compare_resolution > (w1, h1) = resolution_from_string(res1) > File "/usr/lib/python2.5/site-packages/rhpxl/xhwstate.py", line 49, > in resolution_from_string > (w, h) = string.split (res, "x") > ValueError: need more than 1 value to unpack Already filed. s-c-d needs to be taken out behind the barn and shot. - ajax From michal at harddata.com Mon Jan 8 17:15:30 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 8 Jan 2007 10:15:30 -0700 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <45A1AC2D.5000504@insight.rr.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> <45A163B0.5030303@insight.rr.com> <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> <45A1AC2D.5000504@insight.rr.com> Message-ID: <20070108171530.GB8114@mail.harddata.com> On Sun, Jan 07, 2007 at 09:27:57PM -0500, Jim Cornette wrote: > > Thanks for the leads. I was wondering if the other reports filed should > reference depending upon ORBit2 and this bug number if downgrading > ORBits2 stops the crashing? I bumped in another application with a consistent "crash-on-exit" behaviour. Try to adjust keyboard properties from a GUI in "Preferences" menu entry and see for yourself. I do not know at this moment of backing out ORBit2 version helps here. I guess that I will wait for updates before filing any new bug reports. Michal From twaugh at redhat.com Mon Jan 8 18:59:50 2007 From: twaugh at redhat.com (Tim Waugh) Date: Mon, 8 Jan 2007 13:59:50 -0500 Subject: Fedora Core 6 Test Update: hal-cups-utils-0.6.5-1.fc6 Message-ID: <200701081859.l08Ixosp009189@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-007 2007-01-08 --------------------------------------------------------------------- Product : Fedora Core 6 Name : hal-cups-utils Version : 0.6.5 Release : 1.fc6 Summary : Halified CUPS utilities Description : Halified utilities for CUPS: - hal_lpadmin - hal CUPS backend --------------------------------------------------------------------- Update Information: Bug fix update. --------------------------------------------------------------------- * Mon Jan 8 2007 Tim Waugh 0.6.5-1 - Requires system-config-printer >= 0.7.46. - 0.6.5: - Set PPD page size before adding printer (bug #221841). * Thu Jan 4 2007 Tim Waugh 0.6.4-1 - 0.6.4: - Don't enable/disable existing printers. * Tue Jan 2 2007 Tim Waugh 0.6.3-1 - 0.6.3: - Applied all patches. - Added syslogging. - Use 'hp:' URIs when appropriate (bug #175555). - Put PPD NickName in info line instead of just 'Added by HAL'. - Don't add/remove new printer if one already exists with a matching URI. * Thu Nov 9 2006 Tim Waugh - 0.6.2-4.2 - IEEE 1284 Device ID in CUPS backend (bug #214755). * Wed Nov 8 2006 Tim Waugh - 0.6.2-4.1 - Use printer.commandset when matching printers (bug #214180). - Fixed HAL printer interface API name (bug #214598). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ b194c2a36f5a3ded8aedbacd4735c091c04a4f9d SRPMS/hal-cups-utils-0.6.5-1.fc6.src.rpm b194c2a36f5a3ded8aedbacd4735c091c04a4f9d noarch/hal-cups-utils-0.6.5-1.fc6.src.rpm c76a3e799235d388f5243cb2290d9fd2896ca06b ppc/debug/hal-cups-utils-debuginfo-0.6.5-1.fc6.ppc.rpm 73b6edadcab6b011bed9bea44cfa4efe167144c7 ppc/hal-cups-utils-0.6.5-1.fc6.ppc.rpm 1b43a464d24f8696110255b8c357845dc97ba9c0 x86_64/hal-cups-utils-0.6.5-1.fc6.x86_64.rpm 7c3ede0ceb84a726db7fa18d2b9c50307329ff65 x86_64/debug/hal-cups-utils-debuginfo-0.6.5-1.fc6.x86_64.rpm 117aca3205dbb9cee701bc7fe7c5accd4ce96693 i386/hal-cups-utils-0.6.5-1.fc6.i386.rpm 8bd209fde0cc8852c40c102150bc89342b570ebb i386/debug/hal-cups-utils-debuginfo-0.6.5-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Mon Jan 8 19:00:58 2007 From: twaugh at redhat.com (Tim Waugh) Date: Mon, 8 Jan 2007 14:00:58 -0500 Subject: Fedora Core 6 Test Update: system-config-printer-0.7.46-1.fc6 Message-ID: <200701081900.l08J0wwk009558@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-022 2007-01-08 --------------------------------------------------------------------- Product : Fedora Core 6 Name : system-config-printer Version : 0.7.46 Release : 1.fc6 Summary : A printer administration tool Description : system-config-printer is a graphical user interface that allows the user to configure a CUPS print server. --------------------------------------------------------------------- Update Information: Bug fix update for "wrong page size" problem. --------------------------------------------------------------------- * Mon Jan 8 2007 Tim Waugh 0.7.46-1 - 0.7.46: - Fixed page size problem (bug #221702). - Added 'ro' to ALL_LINGUAS. * Wed Jan 3 2007 Tim Waugh 0.7.45-1 - Updated to pycups-1.9.17. - 0.7.45: - Fixed traceback in driver check. * Tue Jan 2 2007 Tim Waugh 0.7.44-1 - 0.7.44: - Fixed traceback in error display (bug #220136). - Preserve case in model string when dumping debug output. * Thu Dec 21 2006 Tim Waugh 0.7.43-1 - 0.7.43: - Don't check against IEEE 1284 DES field at all. - Merged device matching code (bug #219518). - Catch non-fatal errors when auto-matching device. - Fixed driver checking bug involving pipelines (bug #220347). - Show PPD errors (bug #220136). * Mon Dec 11 2006 Tim Waugh 0.7.42-1 - 0.7.42: - Fixed typo in command set matching code. - Case-insensitive matching when Device ID not known to database. * Thu Dec 7 2006 Tim Waugh 0.7.41-1 - Updated pycups to 1.9.16. - 0.7.41: - Reconnect smoothly after uploading new configuration. - Update lpoptions when setting default printer if it conflicts with the new setting (bug #217395). - Fixed typo in show_HTTP_Error (bug #217537). - Don't pre-select make and model when not discoverable for chosen device (bug #217518). - Set Forward button sensitive on Device screen in new-printer dialog (bug #217515). - Keep Server Settings selected after applying changes if it was selected before. - Set Connecting dialog transient for main window. - Center Connecting dialog on parent. - Optional 'reason' argument for cupshelpers.Printer.setEnabled. - Describe devices that have no optional parameters. * Thu Nov 30 2006 Tim Waugh - Provide pycups feature. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ e13fc2883f7957bc4d31b0427e0f623a0c5c6aa3 SRPMS/system-config-printer-0.7.46-1.fc6.src.rpm e13fc2883f7957bc4d31b0427e0f623a0c5c6aa3 noarch/system-config-printer-0.7.46-1.fc6.src.rpm 3e349749e8d4450973e49eabeb8273c61c4d5b40 ppc/debug/system-config-printer-debuginfo-0.7.46-1.fc6.ppc.rpm 8ee8e3c468fd17913fc4f26d30aeaab42433a330 ppc/system-config-printer-libs-0.7.46-1.fc6.ppc.rpm e71fd163b265ab61fb54dab20bd68b84dc10149b ppc/system-config-printer-0.7.46-1.fc6.ppc.rpm 35aaf8c878f0b44912750a31efcbfadbf64eafcb x86_64/debug/system-config-printer-debuginfo-0.7.46-1.fc6.x86_64.rpm 71a8f09ce87fe82c8bef28aea1e45453e4231955 x86_64/system-config-printer-libs-0.7.46-1.fc6.x86_64.rpm 24a36be471074fc27b8ba2df6618e5ce5a9608bc x86_64/system-config-printer-0.7.46-1.fc6.x86_64.rpm b8414647566c4f4c97db9788e2f49c61040068cc i386/debug/system-config-printer-debuginfo-0.7.46-1.fc6.i386.rpm e2ff7c1d4f9076fd9ce345486b5cd1a56cfda95d i386/system-config-printer-0.7.46-1.fc6.i386.rpm b92276c4a207ed32b2cfdd22d80004e23aea1ae1 i386/system-config-printer-libs-0.7.46-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Mon Jan 8 19:02:25 2007 From: twaugh at redhat.com (Tim Waugh) Date: Mon, 8 Jan 2007 14:02:25 -0500 Subject: Fedora Core 6 Test Update: cups-1.2.7-1.6.fc6 Message-ID: <200701081902.l08J2PSJ010136@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-023 2007-01-08 --------------------------------------------------------------------- Product : Fedora Core 6 Name : cups Version : 1.2.7 Release : 1.6.fc6 Summary : Common Unix Printing System Description : The Common UNIX Printing System provides a portable printing layer for UNIX?? operating systems. It has been developed by Easy Software Products to promote a standard printing solution for all UNIX vendors and users. CUPS provides the System V and Berkeley command-line interfaces. --------------------------------------------------------------------- Update Information: Bug fix update to resolve busy loop in ipp backend. --------------------------------------------------------------------- * Wed Jan 3 2007 Tim Waugh 1:1.2.7-1.6 - Applied upstream patch to avoid busy loop in client (STR #2179, bug #219330). * Fri Dec 8 2006 Tim Waugh - Requires tmpwatch for the cron.daily script (bug #218901). * Thu Dec 7 2006 Tim Waugh 1:1.2.7-1.5 - Use upstream patch for STR #2121. - Fixed If-Modified-Since: handling in libcups (bug #217556, STR #2133). - Fixed extra EOF in pstops output (bug #216154, STR #2111). * Tue Nov 28 2006 Tim Waugh - Ship an lpoptions file so it picks up the right SELinux file context. * Mon Nov 27 2006 Tim Waugh 1:1.2.7-1.4 - Better LSPP fix for bug #216855. * Thu Nov 23 2006 Tim Waugh - Use translated string for password prompt (STR #2121). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 15158893af262b6a581f5cd83f4f8c0b003a33c5 SRPMS/cups-1.2.7-1.6.fc6.src.rpm 15158893af262b6a581f5cd83f4f8c0b003a33c5 noarch/cups-1.2.7-1.6.fc6.src.rpm ac76f33f634686d3c12c11271e12ad3eedc51b72 ppc/cups-devel-1.2.7-1.6.fc6.ppc.rpm ea8f55ac4136aa26d6c3b75e830a6827aa88eb73 ppc/cups-libs-1.2.7-1.6.fc6.ppc.rpm 1746abffdca21cb7104c370ee01831adde403692 ppc/cups-1.2.7-1.6.fc6.ppc.rpm 53da8e6061acd0ed5797b1e4512933fa940eab3e ppc/cups-lpd-1.2.7-1.6.fc6.ppc.rpm 19bbed2460afdfceb79d70f78c2d1687df14b54a ppc/debug/cups-debuginfo-1.2.7-1.6.fc6.ppc.rpm 86ede5722e3cd4a9837b85b47c4d64236c03479d x86_64/cups-devel-1.2.7-1.6.fc6.x86_64.rpm c2c74676d0d004e4ca4a71b9c7406f81c3925176 x86_64/cups-lpd-1.2.7-1.6.fc6.x86_64.rpm 3cce811923d9af1585bd6ecaae2bd14c99995811 x86_64/cups-1.2.7-1.6.fc6.x86_64.rpm 19345cfa4836c51f840ee1db5567bf7560f4745e x86_64/cups-libs-1.2.7-1.6.fc6.x86_64.rpm 86a435000964b2df735c56d0e9f61d85e66098ee x86_64/debug/cups-debuginfo-1.2.7-1.6.fc6.x86_64.rpm 4fded2f7f80e23b16968811c7c32e19bd378d5d6 i386/cups-1.2.7-1.6.fc6.i386.rpm 19996f2c6e2c28498ff129eb1720f9b81600a59c i386/cups-libs-1.2.7-1.6.fc6.i386.rpm a3ca93ea14f20300e7a8f51e271f948961841c82 i386/cups-lpd-1.2.7-1.6.fc6.i386.rpm 7eba7936ac4dfb547f27963b89957e01a00a8dc9 i386/debug/cups-debuginfo-1.2.7-1.6.fc6.i386.rpm 025416b012dad88e8c69f0b62fa0137f9ee3688a i386/cups-devel-1.2.7-1.6.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From katzj at redhat.com Mon Jan 8 19:03:21 2007 From: katzj at redhat.com (Jeremy Katz) Date: Mon, 8 Jan 2007 14:03:21 -0500 Subject: Fedora Core 6 Test Update: yum-3.0.3-1.fc6 Message-ID: <200701081903.l08J3LxG010390@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-006 2007-01-08 --------------------------------------------------------------------- Product : Fedora Core 6 Name : yum Version : 3.0.3 Release : 1.fc6 Summary : RPM installer/updater Description : Yum is a utility that can check for and automatically download and install updated RPM packages. Dependencies are obtained and downloaded automatically prompting the user as necessary. --------------------------------------------------------------------- Update Information: This update fixes a number of bugs in yum. --------------------------------------------------------------------- * Mon Jan 8 2007 Jeremy Katz - 3.0.3-1 - update to 3.0.3 (#221622, #221470, #220953) * Wed Jan 3 2007 Jeremy Katz - 3.0.2-1 - update to 3.0.2 with lots of fixes * Fri Nov 10 2006 Jeremy Katz - 3.0.1-2 - yum-updatesd fixes (#213622, #212494, #212507) * Fri Nov 3 2006 Jeremy Katz - 3.0.1-1 - update to 3.0.1 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ f4ef018b1c17c4193cb3e80a83479dbf14f9aee7 SRPMS/yum-3.0.3-1.fc6.src.rpm f4ef018b1c17c4193cb3e80a83479dbf14f9aee7 noarch/yum-3.0.3-1.fc6.src.rpm 8f5bca4de82f934879138aac0ec71f531126ed61 ppc/yum-3.0.3-1.fc6.noarch.rpm 8329b30bdaa0d52d5040b3520430b0eb5a7eeb1f ppc/yum-updatesd-3.0.3-1.fc6.noarch.rpm 8f5bca4de82f934879138aac0ec71f531126ed61 x86_64/yum-3.0.3-1.fc6.noarch.rpm 8329b30bdaa0d52d5040b3520430b0eb5a7eeb1f x86_64/yum-updatesd-3.0.3-1.fc6.noarch.rpm 8f5bca4de82f934879138aac0ec71f531126ed61 i386/yum-3.0.3-1.fc6.noarch.rpm 8329b30bdaa0d52d5040b3520430b0eb5a7eeb1f i386/yum-updatesd-3.0.3-1.fc6.noarch.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From katzj at redhat.com Mon Jan 8 19:03:23 2007 From: katzj at redhat.com (Jeremy Katz) Date: Mon, 8 Jan 2007 14:03:23 -0500 Subject: Fedora Core 6 Test Update: yum-metadata-parser-1.0.3-1.fc6 Message-ID: <200701081903.l08J3NX4010398@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-006 2007-01-08 --------------------------------------------------------------------- Product : Fedora Core 6 Name : yum-metadata-parser Version : 1.0.3 Release : 1.fc6 Summary : A fast metadata parser for yum Description : Fast metadata parser for yum implemented in C. --------------------------------------------------------------------- Update Information: This update fixes a number of bugs in yum. --------------------------------------------------------------------- * Mon Jan 8 2007 Jeremy Katz - 1.0.3-1 - update to 1.0.3 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 5c868cfeef9aa0893acc74271e3b4b6033dc0ee0 SRPMS/yum-metadata-parser-1.0.3-1.fc6.src.rpm 5c868cfeef9aa0893acc74271e3b4b6033dc0ee0 noarch/yum-metadata-parser-1.0.3-1.fc6.src.rpm 1c2781a5f203762fc3c48821dced56b75db5b715 ppc/debug/yum-metadata-parser-debuginfo-1.0.3-1.fc6.ppc.rpm 86819e2e44686c2fa39e3894acfa9bbbf6c747bd ppc/yum-metadata-parser-1.0.3-1.fc6.ppc.rpm 6bb973299fdaa54d7fe3daad1e5df26a384fb1e8 x86_64/yum-metadata-parser-1.0.3-1.fc6.x86_64.rpm 9a64e3a4483c15872fe80a8202ea460cd5ebe156 x86_64/debug/yum-metadata-parser-debuginfo-1.0.3-1.fc6.x86_64.rpm ad9b51c79e506bdf3aeeb5f1f09b5383f6b75c09 i386/yum-metadata-parser-1.0.3-1.fc6.i386.rpm 5d7d045508bfb61b02f7bf7e7f05f57c0d6848c3 i386/debug/yum-metadata-parser-debuginfo-1.0.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From bloch at verdurin.com Mon Jan 8 19:54:28 2007 From: bloch at verdurin.com (bloch at verdurin.com) Date: Mon, 8 Jan 2007 19:54:28 +0000 Subject: Fedora Core 6 Test Update: yum-3.0.2-1.fc6 In-Reply-To: <45A20F52.50101@rasmil.dk> References: <200701032056.l03KuSoR032742@int-mx1.corp.redhat.com> <20070107225559.GE1076@bloch.config> <45A20F52.50101@rasmil.dk> Message-ID: <20070108195428.GF1076@bloch.config> On Mon, 08 Jan 2007, Tim Lauridsen wrote: > >>--------------------------------------------------------------------- > >>Update Information: > >> > >>This update fixes a number of bugs in yum. > >> > > > >With this update I'm still finding that yum-updatesd sometimes blocks > >manual invocations of yum. > > > > > There is a problem with yum 3.0.2, it take very long time to initialize > updates, so yum-updated will take much longer to run and block other > invocations of yum. > This is fixed upstream in yum 3.0.3, just released. > I'm sure there soon will be a new release for FC6. > That makes sense and explains the variable results I was seeing. Thanks, Adam From seandarcy2 at gmail.com Mon Jan 8 22:06:19 2007 From: seandarcy2 at gmail.com (sean) Date: Mon, 08 Jan 2007 17:06:19 -0500 Subject: ntp messed up; where I start? Message-ID: ntp-4.2.2p4-2.fc7.x86_64 I set time and date this morning. Now at 16;45 local time, I show 23:09 on the computer. I've been seeing these huge fast times for about a week. I've erased ntp ( including all the /etc/ntp and /var/lib/ntp files ) and reinstalled. syslog shows that a restart makes it work ( notice the time jump ): Jan 8 23:14:41 localhost ntpd[2913]: ntpd exiting on signal 15 Jan 8 16:49:25 localhost ntpdate[10916]: step time server 62.206.253.10 offset -23128.011850 sec Jan 8 16:49:25 localhost ntpd[10918]: ntpd 4.2.2p4 at 1.1585 Wed Nov 22 14:49:33 UTC 2006 (1) Jan 8 16:49:25 localhost ntpd[10919]: precision = 2.000 usec Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface wildcard, 0.0.0.0#123 Disabled Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface wildcard, ::#123 Disabled Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface lo, ::1#123 Enabled Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface eth0, fe80::215:f2ff:fe77:8613#123 Enabled Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface lo, 127.0.0.1#123 Enabled Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface eth0, 10.10.8.1#123 Enabled Jan 8 16:49:25 localhost ntpd[10919]: kernel time sync status 0040 Jan 8 16:49:25 localhost ntpd[10919]: frequency initialized 0.000 PPM from /var/lib/ntp/drift ntpstat always shows: ntpstat unsynchronised time server re-starting polling server every 64 s ntpq shows me reaching the time servers ( notice how much offset already): ntpq> pe remote refid st t when poll reach delay offset jitter ============================================================================== 58.73.137.250 .GPS. 1 u 55 64 177 439.874 -102854 69862.7 trogdor.ruka.or 64.142.103.194 2 u 61 64 177 192.566 -5814.1 124198. dnsserver.org 76.169.239.34 2 u 61 64 177 208.446 -6295.5 124753. It's a three-month old mobo. It's dual boot, no problem in windows. I don't know a lot about ntp, not enough to file a cogent bug report. What should I be looking for? sean From seandarcy2 at gmail.com Mon Jan 8 22:50:55 2007 From: seandarcy2 at gmail.com (sean) Date: Mon, 08 Jan 2007 17:50:55 -0500 Subject: ntp messed up; where I start? In-Reply-To: References: Message-ID: sean wrote: > ntp-4.2.2p4-2.fc7.x86_64 > > I set time and date this morning. Now at 16;45 local time, I show 23:09 > on the computer. I've been seeing these huge fast times for about a week. > > I've erased ntp ( including all the /etc/ntp and /var/lib/ntp files ) > and reinstalled. > > syslog shows that a restart makes it work ( notice the time jump ): > > Jan 8 23:14:41 localhost ntpd[2913]: ntpd exiting on signal 15 > Jan 8 16:49:25 localhost ntpdate[10916]: step time server 62.206.253.10 > offset -23128.011850 sec > Jan 8 16:49:25 localhost ntpd[10918]: ntpd 4.2.2p4 at 1.1585 Wed Nov 22 > 14:49:33 UTC 2006 (1) > Jan 8 16:49:25 localhost ntpd[10919]: precision = 2.000 usec > Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface wildcard, > 0.0.0.0#123 Disabled > Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface wildcard, > ::#123 Disabled > Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface lo, > ::1#123 Enabled > Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface eth0, > fe80::215:f2ff:fe77:8613#123 Enabled > Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface lo, > 127.0.0.1#123 Enabled > Jan 8 16:49:25 localhost ntpd[10919]: Listening on interface eth0, > 10.10.8.1#123 Enabled > Jan 8 16:49:25 localhost ntpd[10919]: kernel time sync status 0040 > Jan 8 16:49:25 localhost ntpd[10919]: frequency initialized 0.000 PPM > from /var/lib/ntp/drift > > ntpstat always shows: > > ntpstat > unsynchronised > time server re-starting > polling server every 64 s > > ntpq shows me reaching the time servers ( notice how much offset already): > > ntpq> pe > remote refid st t when poll reach delay offset > jitter > ============================================================================== > > 58.73.137.250 .GPS. 1 u 55 64 177 439.874 -102854 > 69862.7 > trogdor.ruka.or 64.142.103.194 2 u 61 64 177 192.566 -5814.1 > 124198. > dnsserver.org 76.169.239.34 2 u 61 64 177 208.446 -6295.5 > 124753. > > > It's a three-month old mobo. It's dual boot, no problem in windows. > > I don't know a lot about ntp, not enough to file a cogent bug report. > > What should I be looking for? > > sean > Still messing around. Actual time is 5:30: # date Mon Jan 8 17:48:23 EST 2007 # hwclock Mon 08 Jan 2007 05:30:41 PM EST -1.028559 seconds !!! Any clues? sean From fct-cornette at insight.rr.com Mon Jan 8 22:50:23 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Mon, 08 Jan 2007 17:50:23 -0500 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <20070108171530.GB8114@mail.harddata.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> <45A163B0.5030303@insight.rr.com> <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> <45A1AC2D.5000504@insight.rr.com> <20070108171530.GB8114@mail.harddata.com> Message-ID: <45A2CAAF.5090802@insight.rr.com> Michal Jaegermann wrote: > On Sun, Jan 07, 2007 at 09:27:57PM -0500, Jim Cornette wrote: >> Thanks for the leads. I was wondering if the other reports filed should >> reference depending upon ORBit2 and this bug number if downgrading >> ORBits2 stops the crashing? > > I bumped in another application with a consistent "crash-on-exit" > behaviour. Try to adjust keyboard properties from a GUI in > "Preferences" menu entry and see for yourself. > > I do not know at this moment of backing out ORBit2 version helps > here. I guess that I will wait for updates before filing any > new bug reports. > > Michal > It sure enough does crash! http://bugzilla.gnome.org/show_bug.cgi?id=394443 With bug buddy, filing the report is too easy to post. I'll refrain from going too far to the extreme, but this should at least get orbit2 some tlc from reassigning the reports to the ORBit2 component. Jim -- Experience is what you get when you were expecting something else. From selinux at gmail.com Mon Jan 8 23:33:42 2007 From: selinux at gmail.com (Tom London) Date: Mon, 8 Jan 2007 15:33:42 -0800 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <45A2CAAF.5090802@insight.rr.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> <45A163B0.5030303@insight.rr.com> <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> <45A1AC2D.5000504@insight.rr.com> <20070108171530.GB8114@mail.harddata.com> <45A2CAAF.5090802@insight.rr.com> Message-ID: <4c4ba1530701081533p226540d3k73c68d72374c1e10@mail.gmail.com> On 1/8/07, Jim Cornette wrote: > It sure enough does crash! > > http://bugzilla.gnome.org/show_bug.cgi?id=394443 > > With bug buddy, filing the report is too easy to post. > > I'll refrain from going too far to the extreme, but this should at least > get orbit2 some tlc from reassigning the reports to the ORBit2 component. > > Jim > This does not crash for me running ORBit2-2.14.3-4.fc7..... tom -- Tom London From michal at harddata.com Tue Jan 9 00:43:23 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 8 Jan 2007 17:43:23 -0700 Subject: ntp messed up; where I start? In-Reply-To: References: Message-ID: <20070109004323.GC21198@mail.harddata.com> On Mon, Jan 08, 2007 at 05:06:19PM -0500, sean wrote: > ntp-4.2.2p4-2.fc7.x86_64 > > I set time and date this morning. Now at 16;45 local time, I > show 23:09 on the computer. This is not likely ntp. Probably something is messing up your clocks. Kernel is pickup up a clock which is broken? When differences are too big then ntp is giving up. A quick check. Set clock correctly, do not start ntpd at all. Is time sane after a while then? > Jan 8 16:49:25 localhost ntpd[10919]: frequency initialized > 0.000 PPM from /var/lib/ntp/drift 0.000 PPM??? > > ntpq> pe > remote refid st t when poll reach delay offset jitter > ============================================================================== > 58.73.137.250 .GPS. 1 u 55 64 177 439.874 -102854 69862.7 > trogdor.ruka.or 64.142.103.194 2 u 61 64 177 192.566 -5814.1 124198. > dnsserver.org 76.169.239.34 2 u 61 64 177 208.446 -6295.5 124753. These are HUGE values for delay, offset and jitter. Do you have anything defined in /etc/ntp/step-tickers so you are trying to change an initial clock value on a startup? I do not think that ntpd will really try to do anything with stuff of that sort. BTW - where is your .LOCL. clock? Did you remove it from a configuration? Not such great idea. Michal From michal at harddata.com Tue Jan 9 00:54:24 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 8 Jan 2007 17:54:24 -0700 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <45A2CAAF.5090802@insight.rr.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> <45A163B0.5030303@insight.rr.com> <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> <45A1AC2D.5000504@insight.rr.com> <20070108171530.GB8114@mail.harddata.com> <45A2CAAF.5090802@insight.rr.com> Message-ID: <20070109005424.GD21198@mail.harddata.com> On Mon, Jan 08, 2007 at 05:50:23PM -0500, Jim Cornette wrote: > > It sure enough does crash! > > http://bugzilla.gnome.org/show_bug.cgi?id=394443 > > With bug buddy, filing the report is too easy to post. Apparently "too easy" is right. :-) It is already closed as a duplicate of http://bugzilla.gnome.org/show_bug.cgi?id=364839 and that one list forty four, or something in that range, duplicates. For more fun 364839 is closed as resolved. Michal From fct-cornette at insight.rr.com Tue Jan 9 02:13:37 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Mon, 08 Jan 2007 21:13:37 -0500 Subject: programs launching bug buddy on exit, anyone else seeing this type problem? In-Reply-To: <20070109005424.GD21198@mail.harddata.com> References: <45A06BC3.9090909@insight.rr.com> <20070107164343.GA3884@mail.harddata.com> <4c4ba1530701070955ocd4a944he21137ec05a42695@mail.gmail.com> <45A163B0.5030303@insight.rr.com> <4c4ba1530701071424p7823a497tb4932e90242f194c@mail.gmail.com> <45A1AC2D.5000504@insight.rr.com> <20070108171530.GB8114@mail.harddata.com> <45A2CAAF.5090802@insight.rr.com> <20070109005424.GD21198@mail.harddata.com> Message-ID: <45A2FA51.9020409@insight.rr.com> Michal Jaegermann wrote: > On Mon, Jan 08, 2007 at 05:50:23PM -0500, Jim Cornette wrote: >> It sure enough does crash! >> >> http://bugzilla.gnome.org/show_bug.cgi?id=394443 >> >> With bug buddy, filing the report is too easy to post. > > Apparently "too easy" is right. :-) It is already closed as > a duplicate of http://bugzilla.gnome.org/show_bug.cgi?id=364839 > and that one list forty four, or something in that range, duplicates. > For more fun 364839 is closed as resolved. > > Michal > But what was fixed? One other thing puzzles me as to why they show all of the endless scrolling through bug marked as duplicate instead of having a way to tally all of the duplicates within a separate area for duplicates , depends on or similar fields. Still waiting on ORBit2 to be repaired either upstream or locally. Jim -- If you don't have time to do it right, where are you going to find the time to do it over? From moshe at runslinux.net Tue Jan 9 02:43:00 2007 From: moshe at runslinux.net (Moshe Jacobson) Date: Mon, 8 Jan 2007 21:43:00 -0500 Subject: rawhide report: 20070106 changes In-Reply-To: <1168202390.3650.11.camel@T7.Linux> References: <200701061126.l06BQKq6029123@hs20-bc2-6.build.redhat.com> <358a1cd50701071150r69809d48o42a5108ada4ffaea@mail.gmail.com> <1168202390.3650.11.camel@T7.Linux> Message-ID: <358a1cd50701081843j25a26fdbk64621dc0e293921d@mail.gmail.com> On 1/7/07, Paul wrote: > > On Sun, 2007-01-07 at 14:50 -0500, Moshe Jacobson wrote: > > On 1/6/07, buildsys at redhat.com wrote: > > openoffice.org-1:2.1.0-6.10 > > --------------------------- > > * Wed Jan 03 2007 Caolan McNamara - > > 1:2.1.0-6.10 > > - Resolves: rhbz#216094 add workspace.impress115.patch > > > > Unlike the others, I'm having problems on my 32-bit machine. Anytime > > I try to save a document from an openoffice app, the whole app just > > stops responding altogether. Is this happening for anyone else? > > > > Running: > > kernel-2.6.18-1.2849.fc6 > > openoffice.org-core-2.1.0-6.10 > > Why the old kernel? Are you not running rawhide? The newer kernel causes my broadcom wireless NIC not to work properly, I think. I can't remember, but there's something wrong with it that I didn't feel like figuring out at the time. Personally, I'd save the throwback and submit it to BZ. If it's the same > as the current problem, C will flag it. By the sounds of it, it's not. How do I get a throwback if it's freezing? Moshe -- Moshe Jacobson www.runslinux.net 770.366.2923(m) 678.298.5375(w) IM me: jehsom on AIM/Yahoo!/ICQ/Google; moshe at runslinux.net on MSN -------------- next part -------------- An HTML attachment was scrubbed... URL: From buildsys at redhat.com Tue Jan 9 11:17:43 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Tue, 9 Jan 2007 06:17:43 -0500 Subject: rawhide report: 20070109 changes Message-ID: <200701091117.l09BHhvM004765@hs20-bc2-6.build.redhat.com> New package fast-user-switch-applet A panel applet for user-switching Updated Packages: autofs-1:5.0.1-0.rc3.3 ---------------------- * Tue Jan 09 2007 Ian Kent - 5.0.1-0.rc3.3 - remove redundant rpath link option (prep for move to Extras). * Tue Jan 09 2007 Ian Kent - 5.0.1-0.rc3.1 - consolidate to rc3. - fix typo in Fix typo in var when removing temp directory (bz 221847). binutils-2.17.50.0.9-1 ---------------------- * Mon Jan 08 2007 Jakub Jelinek 2.17.50.0.9-1 - update to 2.17.50.0.9 - fix tekhex reader bzip2-1.0.4-1.fc7 ----------------- * Mon Jan 08 2007 Ivana Varekova 1.0.4-1 - update to 1.0.4 - spec file cleanup cpuspeed-1:1.2.1-1.48.fc7 ------------------------- * Mon Jan 08 2007 Jarod Wilson - Let non-centrino/powernow-k8 systems also use other validated governors (#219926) - Fix cpuspeed daemon options settings (#221829) dovecot-1.0-2.rc17.fc7 ---------------------- * Mon Jan 08 2007 Tomas Janousek - 1.0-2.rc17 - update to latest upstream, fixes a few bugs * Thu Dec 21 2006 Tomas Janousek - 1.0-1.1.rc15 - reenabled GSSAPI (#220377) evolution-2.9.5-1.fc7 --------------------- * Tue Jan 08 2008 Matthew Barnes - 2.9.5-1.fc7 - Update to 2.9.5 - Remove pilot-link-0.12 patch (fixed upstream). - Remove patch for RH bug #215466 and #218589 (fixed upstream). - Remove patch for RH bug #215695 (fixed upstream). * Sat Dec 30 2006 Matthew Barnes - 2.9.4-4.fc7 - Add Requires evolution-data-server-devel to devel subpackage (RH bug #218889). * Thu Dec 21 2006 Matthew Barnes - 2.9.4-3.fc7 - Add patch for RH bug #218898 (viewing message source). evolution-connector-2.9.5-1.fc7 ------------------------------- * Mon Jan 08 2007 Matthew Barnes - 2.9.5-1.fc7 - Update to 2.9.5 - Remove patch for GNOME bug #357660 (fixed upstream). evolution-data-server-1.9.5-1.fc7 --------------------------------- * Mon Jan 08 2007 Matthew Barnes - 1.9.5-1.fc7 - Update to 1.9.5 - Remove patch for GNOME bug #362638 (fixed upstream). - Remove patch for GNOME bug #387638 (fixed upstream). fonts-arabic-2.0-4.fc7 ---------------------- * Tue Jan 09 2007 Parag Nemade - 2.0-4 - Resolved:bug rh#221385 PakTypeTehreer.ttf contains a space in PS name (Parag Nemade) gawk-3.1.5-12.fc6 ----------------- * Mon Jan 08 2007 Karel Zak 3.1.5-12 - fix #221827 - double free or corruption (patch from upstream) gcc-4.1.1-53 ------------ * Tue Jan 09 2007 Jakub Jelinek 4.1.1-53 - fix libgomp testsuite driver (Ulrich Weigand) - combiner fixes (Richard Sandiford, PR rtl-optimization/25514, PR rtl-optimization/27736) gnome-python2-2.17.2-1.fc7 -------------------------- * Mon Jan 08 2007 Matthew Barnes - 2.17.2-1 - Update to 2.17.2 * Sun Jan 07 2007 Matthew Barnes - 2.17.1-1 - Update to 2.17.1 * Sun Dec 31 2006 Matthew Barnes - 2.16.2-5 - Bonobo subpackage requires pyorbit >= 2.0.1, not 2.0.l (RH bug #150885). gnome-python2-desktop-2.17.3-1.fc7 ---------------------------------- * Mon Jan 08 2007 Matthew Barnes - 2.17.3-1 - Update to 2.17.3 gtkhtml3-3.13.5-1.fc7 --------------------- * Mon Jan 08 2007 Matthew Barnes - 3.13.5-1.fc7 - Update to 3.13.5 * Mon Jan 08 2007 Matthew Barnes - 3.13.4-2.fc7 - Add patch for GNOME bug #394182 (code cleanup). - Remove patch for GNOME bug #363036 (superseded). hal-cups-utils-0.6.5-1.fc7 -------------------------- * Mon Jan 08 2007 Tim Waugh 0.6.5-1 - Requires system-config-printer >= 0.7.46. - 0.6.5: - Set PPD page size before adding printer (bug #221841). libsoup-2.2.99-1.fc7 -------------------- * Mon Jan 08 2007 Matthew Barnes - 2.2.99-1 - Update to 2.2.99 m17n-db-1.3.4-1.fc7 ------------------- * Mon Jan 08 2007 Mayank Jain - Resolves: Bug 221794 - Rebased to new release m17n-db-1.3.4 - Removed patch: si-wijesekera_surrounding_to_preedit.patch - Added directive to delete si-wijesekera from the upstream tarball as it used surrounding text - Commented directive to copy bopo-kbd.mim - Commented directive using variable.mim and command.mim - added global.mim in place of them - Added sections for new Uyghur. - Added copy directive for Mizuochi (grc-*) keymap for classical greek - Added directives to install translations for japanese translations. - Added patch to rename si-wijesekera-preedit to si-wijesekera and add key summary as Patch2 ntp-4.2.4-1.fc7 --------------- * Mon Jan 08 2007 Miroslav Lichvar 4.2.4-1 - update to 4.2.4 (#146884) - don't use local clock in default config - autogenerate man pages from HTML - clean up spec a bit openoffice.org-1:2.1.0-6.11 --------------------------- * Sat Jan 06 2007 Caolan McNamara - 1:2.1.0-6.11 - Resolves: rhbz#221491 openoffice.org-2.1.0.ooo73201.sw.a11yloadcrash.patch system-config-printer-0.7.46-1.fc7 ---------------------------------- * Mon Jan 08 2007 Tim Waugh 0.7.46-1 - 0.7.46: - Fixed page size problem (bug #221702). - Added 'ro' to ALL_LINGUAS. vim-2:7.0.178-3 --------------- * Mon Jan 08 2007 Karsten Hopp 7.0.178-3 - enable filetype plugin vnc-4.1.2-9.fc7 --------------- * Mon Jan 08 2007 Adam Tkac 4.1.2-9.fc7 - enable render extensions by default on s390 & s390x xorg-x11-xkb-utils-1.0.2-3.fc7 ------------------------------ * Mon Jan 08 2007 Adam Jackson 1.0.2-3 - From OLPC: jam -DHAVE_STRCASECMP into CFLAGS to make xkbcomp (and therefore X server startup) slightly less painfully slow. yum-metadata-parser-1.0.3-1.fc7 ------------------------------- * Mon Jan 08 2007 Jeremy Katz - 1.0.3-1 - update to 1.0.3 Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From vonbrand at inf.utfsm.cl Tue Jan 9 12:04:54 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Tue, 09 Jan 2007 09:04:54 -0300 Subject: rawhide report: 20070109 changes In-Reply-To: Message from buildsys@redhat.com of "Tue, 09 Jan 2007 06:17:43 CDT." <200701091117.l09BHhvM004765@hs20-bc2-6.build.redhat.com> Message-ID: <200701091204.l09C4sQ3004260@laptop13.inf.utfsm.cl> buildsys at redhat.com wrote: > autofs-1:5.0.1-0.rc3.3 > ---------------------- > * Tue Jan 09 2007 Ian Kent - 5.0.1-0.rc3.3 > - remove redundant rpath link option (prep for move to Extras). ^^^^^^ Huh? -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From dennis at ausil.us Tue Jan 9 13:10:34 2007 From: dennis at ausil.us (Dennis Gilmore) Date: Tue, 9 Jan 2007 07:10:34 -0600 Subject: rawhide report: 20070109 changes In-Reply-To: <200701091204.l09C4sQ3004260@laptop13.inf.utfsm.cl> References: <200701091204.l09C4sQ3004260@laptop13.inf.utfsm.cl> Message-ID: <200701090710.34692.dennis@ausil.us> On Tuesday 09 January 2007 6:04 am, Horst H. von Brand wrote: > buildsys at redhat.com wrote: > > autofs-1:5.0.1-0.rc3.3 > > ---------------------- > > * Tue Jan 09 2007 Ian Kent - 5.0.1-0.rc3.3 > > - remove redundant rpath link option (prep for move to Extras). > > ^^^^^^ > Huh? \Core is merging with Extras to become Fedora -- Dennis Gilmore, RHCE Proud Australian From notting at redhat.com Tue Jan 9 16:54:54 2007 From: notting at redhat.com (Bill Nottingham) Date: Tue, 9 Jan 2007 11:54:54 -0500 Subject: Fedora Core 6 Test Update: gnucash-2.0.4-1.fc6 Message-ID: <200701091654.l09GssnX003603@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-025 2007-01-09 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnucash Version : 2.0.4 Release : 1.fc6 Summary : GnuCash is an application to keep track of your finances. Description : GnuCash is a personal finance manager. A check-book like register GUI allows you to enter and track bank accounts, stocks, income and even currency trades. The interface is designed to be simple and easy to use, but is backed with double-entry accounting principles to ensure balanced books. --------------------------------------------------------------------- Update Information: This updates GNUCash to the latest upstream release. If no regressions are found, this will be pushed final on Friday, January 12. --------------------------------------------------------------------- * Mon Jan 8 2007 Bill Nottingham - 2.0.4-1 - update to 2.0.4 * Wed Oct 11 2006 Bill Nottingham - 2.0.2-1 - update to 2.0.2 - update docs to 2.0.1 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ d2a855899775f7781577f00c8835020a357f119a SRPMS/gnucash-2.0.4-1.fc6.src.rpm d2a855899775f7781577f00c8835020a357f119a noarch/gnucash-2.0.4-1.fc6.src.rpm 8e94aa3b4b54208d024ce092794601c6bc4e97d8 ppc/debug/gnucash-debuginfo-2.0.4-1.fc6.ppc.rpm 3a363d7cdbacaad489fdf92d743826f4e2fb8e9d ppc/gnucash-2.0.4-1.fc6.ppc.rpm b76fe99539f9e595ea0861d7c9b82d97c354b3c6 x86_64/debug/gnucash-debuginfo-2.0.4-1.fc6.x86_64.rpm 480be8b5d0e5da4b0d1abc12f8879dc539533c27 x86_64/gnucash-2.0.4-1.fc6.x86_64.rpm 7877a6628502495ef496f1e980cc2b2e844f4f38 i386/gnucash-2.0.4-1.fc6.i386.rpm 28a193a65cc808e02305b192122fcf61886af1dd i386/debug/gnucash-debuginfo-2.0.4-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From ikent at redhat.com Tue Jan 9 16:55:54 2007 From: ikent at redhat.com (Ian Kent) Date: Tue, 9 Jan 2007 11:55:54 -0500 Subject: Fedora Core 6 Test Update: autofs-5.0.1-0.rc3.2 Message-ID: <200701091655.l09GtsDR004008@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-026 2007-01-09 --------------------------------------------------------------------- Product : Fedora Core 6 Name : autofs Version : 5.0.1 Release : 0.rc3.2 Summary : A tool for automatically mounting and unmounting filesystems. Description : autofs is a daemon which automatically mounts filesystems when you use them, and unmounts them later when you are not using them. This can include network filesystems, CD-ROMs, floppies, and so forth. --------------------------------------------------------------------- * Tue Jan 9 2007 Ian Kent - 5.0.1-0.rc3.2 - consolidate to rc3. - fix typo in Fix typo in var when removing temp directory (bz 221847). - remove redundant rpath link option. * Wed Dec 27 2006 Ian Kent - 5.0.1-0.rc2.41 - fix nonstrict multi-mount handling (bz 219383). - correct detection of duplicate indirect mount entries (bz 220799). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 931aeda3092dd6b2bc890c2d6daf4130963f0eb4 SRPMS/autofs-5.0.1-0.rc3.2.src.rpm 931aeda3092dd6b2bc890c2d6daf4130963f0eb4 noarch/autofs-5.0.1-0.rc3.2.src.rpm 0f60613f06b199b59e74d98fdb765104aebd34c5 ppc/autofs-5.0.1-0.rc3.2.ppc.rpm 2c61693d1fa3e3821ab65f53b0709398d6fe4e34 ppc/debug/autofs-debuginfo-5.0.1-0.rc3.2.ppc.rpm a2b6003a23e9cfd349b5c9774e8ceeb712de5903 x86_64/autofs-5.0.1-0.rc3.2.x86_64.rpm bab633b918def46b4ee3ee53fd820a9296acfea9 x86_64/debug/autofs-debuginfo-5.0.1-0.rc3.2.x86_64.rpm b66059e1a61ae353df005168c04e8f7c6bcaa525 i386/debug/autofs-debuginfo-5.0.1-0.rc3.2.i386.rpm 6584613f81d66f464e3ecb0b5d061ddc3b9625bc i386/autofs-5.0.1-0.rc3.2.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Tue Jan 9 16:58:55 2007 From: twaugh at redhat.com (Tim Waugh) Date: Tue, 9 Jan 2007 11:58:55 -0500 Subject: Fedora Core 6 Test Update: gimp-print-4.2.7-23.fc6 Message-ID: <200701091658.l09GwtAC004916@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-029 2007-01-09 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gimp-print Version : 4.2.7 Release : 23.fc6 Summary : A collection of high-quality printer drivers. Description : These drivers provide printing quality for UNIX/Linux in many cases equal to or better than proprietary vendor-supplied drivers, and can be used for many of the most demanding printing tasks. --------------------------------------------------------------------- Update Information: Bug fix update for GIMP plug-in. --------------------------------------------------------------------- * Tue Dec 12 2006 Tim Waugh 4.2.7-23 - Set POSIX locale when parsing lpstat output (bug #219017). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ c765121ff9697c8aaf8537c39995eeea7db55700 SRPMS/gimp-print-4.2.7-23.fc6.src.rpm c765121ff9697c8aaf8537c39995eeea7db55700 noarch/gimp-print-4.2.7-23.fc6.src.rpm 0fc8498331c1585d8cd6424a95d744789f7d6f9e ppc/debug/gimp-print-debuginfo-4.2.7-23.fc6.ppc.rpm 2037790b1452e1c6166a72fc4b61c547ce713edc ppc/gimp-print-4.2.7-23.fc6.ppc.rpm 4f88d46be9bc2a1f69d0fd659cb5fab94d69644c ppc/gimp-print-cups-4.2.7-23.fc6.ppc.rpm cc945f6c77901721d7f80f20f41a1d2e331be3ce ppc/gimp-print-devel-4.2.7-23.fc6.ppc.rpm 4d42b15d510edec08d12a96e2782b531060121b6 ppc/gimp-print-utils-4.2.7-23.fc6.ppc.rpm 8f77a07e90edc8dee768db9bac2b112b16abac61 ppc/gimp-print-plugin-4.2.7-23.fc6.ppc.rpm 8992e60ffc51cece074f1b00d729da8d6a1202a6 x86_64/gimp-print-cups-4.2.7-23.fc6.x86_64.rpm 5a91cb5b18095deeefcfcf0d13429385c1b18711 x86_64/gimp-print-plugin-4.2.7-23.fc6.x86_64.rpm 0b2f94f592e4bfc532ff05536eefec3c9a92ea32 x86_64/gimp-print-utils-4.2.7-23.fc6.x86_64.rpm f9a833be8028314c8657c6e45399b426686dd9ee x86_64/gimp-print-4.2.7-23.fc6.x86_64.rpm 5d0780d345edd166049b40a4fa5840f82bd0fcc7 x86_64/debug/gimp-print-debuginfo-4.2.7-23.fc6.x86_64.rpm 8a517944d0e09b05798795f08f31c2b981b6e913 x86_64/gimp-print-devel-4.2.7-23.fc6.x86_64.rpm 44d634dc2f4d5d4051c6609777a440280a0fb1cb i386/gimp-print-4.2.7-23.fc6.i386.rpm 2132567bfb8544fb13d86e9716ec9a2ca0ac2829 i386/debug/gimp-print-debuginfo-4.2.7-23.fc6.i386.rpm c00f06117b380d777b0833cabc852afb0fbee078 i386/gimp-print-utils-4.2.7-23.fc6.i386.rpm 5a3a04a944e1c997c60a2e6eaf878159bc200ccb i386/gimp-print-plugin-4.2.7-23.fc6.i386.rpm 6eccaf65bf0a8886fa3521edb22bc8df8a71f103 i386/gimp-print-devel-4.2.7-23.fc6.i386.rpm 142cad7bfed16ea97307885f7a3da83e8bdaaead i386/gimp-print-cups-4.2.7-23.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From dwalsh at redhat.com Tue Jan 9 22:05:46 2007 From: dwalsh at redhat.com (Daniel Walsh) Date: Tue, 9 Jan 2007 17:05:46 -0500 Subject: Fedora Core 6 Test Update: libselinux-1.33.3-2.fc6 Message-ID: <200701092205.l09M5kJI029706@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-032 2007-01-09 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libselinux Version : 1.33.3 Release : 2.fc6 Summary : SELinux library and simple utilities Description : Security-enhanced Linux is a feature of the Linux?? kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement??, Role-based Access Control, and Multi-level Security. libselinux provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. --------------------------------------------------------------------- * Fri Jan 5 2007 Dan Walsh - 1.33.3-2 - Add securetty handling Resolves: #200110 * Thu Jan 4 2007 Dan Walsh - 1.33.3-1 - Upgrade to upstream * Merged patch for matchpathcon utility to use file mode information when available from Dan Walsh. * Thu Dec 7 2006 Jeremy Katz - 1.33.2-4 - rebuild against python 2.5 * Wed Dec 6 2006 Dan Walsh - 1.33.2-3 - Fix matchpathcon to lstat files * Thu Nov 30 2006 Dan Walsh - 1.33.2-2 - Update man page * Tue Nov 14 2006 Dan Walsh - 1.33.2-1 - Upgrade to upstream * Fri Nov 3 2006 Dan Walsh - 1.33.1-2 - Add James Antill patch for login verification of MLS Levels - MLS ragnes need to be checked, Eg. login/cron. This patch adds infrastructure. * Tue Oct 24 2006 Dan Walsh - 1.33.1-1 - Upgrade to latest from NSA * Merged updated flask definitions from Darrel Goeddel. This adds the context security class, and also adds the string definitions for setsockcreate and polmatch. * Tue Oct 17 2006 Dan Walsh - 1.32-1 - Upgrade to latest from NSA * Updated version for release. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 1f1ff2299f6c691c1839d0542bb7640178077b29 SRPMS/libselinux-1.33.3-2.fc6.src.rpm 1f1ff2299f6c691c1839d0542bb7640178077b29 noarch/libselinux-1.33.3-2.fc6.src.rpm 75a7817b322ba30416592f714b38d53dba242166 ppc/debug/libselinux-debuginfo-1.33.3-2.fc6.ppc.rpm b1e8faaefc97543468c0666a3ac2bc5d841c876f ppc/libselinux-python-1.33.3-2.fc6.ppc.rpm 6e532e75e17d5530279645cdbd9cf40759399bbb ppc/libselinux-devel-1.33.3-2.fc6.ppc.rpm 37fc944da010939bae97ba62b648e7827bde77c0 ppc/libselinux-1.33.3-2.fc6.ppc.rpm aaaa34184b04acf2c9c7d313f77c085a7c64f022 x86_64/libselinux-devel-1.33.3-2.fc6.x86_64.rpm 458b8a7d383877f6236319cc0102d062f4f9a009 x86_64/libselinux-python-1.33.3-2.fc6.x86_64.rpm 7fe1e7b9336f3103c2586c11ee4d0269fba68b5b x86_64/debug/libselinux-debuginfo-1.33.3-2.fc6.x86_64.rpm 4464d3bc5d449785051c460433f7fc889fd49dea x86_64/libselinux-1.33.3-2.fc6.x86_64.rpm 7b02faefa113f8437d91973c1381f561ce2d12c5 i386/libselinux-1.33.3-2.fc6.i386.rpm 8aba20e20c020d5610e1fbaacbebb64d4f924a78 i386/debug/libselinux-debuginfo-1.33.3-2.fc6.i386.rpm 16848679dd9ebb897abe5de3371ab9ae0d7c1801 i386/libselinux-python-1.33.3-2.fc6.i386.rpm 312977cd7d946c17d5ccbf9ebb7b1cbcfa898254 i386/libselinux-devel-1.33.3-2.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Tue Jan 9 22:06:56 2007 From: twaugh at redhat.com (Tim Waugh) Date: Tue, 9 Jan 2007 17:06:56 -0500 Subject: Fedora Core 6 Test Update: foomatic-3.0.2-39.4.fc6 Message-ID: <200701092206.l09M6uTv030031@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-1375 2007-01-09 --------------------------------------------------------------------- Product : Fedora Core 6 Name : foomatic Version : 3.0.2 Release : 39.4.fc6 Summary : Foomatic printer database. Description : Foomatic is a comprehensive, spooler-independent database of printers, printer drivers, and driver descriptions. It contains utilities to generate driver description files and printer queues for CUPS, LPD, LPRng, and PDQ using the database. There is also the possibility to read the PJL options out of PJL-capable laser printers and take them into account at the driver description file generation. There are spooler-independent command line interfaces to manipulate queues (foomatic-configure) and to print files/manipulate jobs (foomatic printjob). The site http://www.linuxprinting.org/ is based on this database. --------------------------------------------------------------------- Update Information: Database update. --------------------------------------------------------------------- * Tue Jan 9 2007 Tim Waugh 3.0.2-39.4 - Removed m2300w files (bug #203381). * Fri Jan 5 2007 Tim Waugh 3.0.2-39.3 - Updated db to 3.0-20070105 (bug #214037, bug #191661, bug #198999, bug #191504, bug #187387, bug #188762, bug #170373, bug #221121, bug #214801). * Fri Dec 1 2006 Tim Waugh 3.0.2-39.2 - Updated db to 3.0-20061130. * Fri Nov 10 2006 Tim Waugh 3.0.2-39.1 - Updated db-engine to 3.0-20061109 (bug #197331). * Tue Nov 7 2006 Tim Waugh 3.0.2-38.2 - Clean up gimp-print-ijs/gutenprint recommended drivers. - Updated db-hpijs to 20061031. * Fri Nov 3 2006 Tim Waugh 3.0.2-38.1 - Updated db-engine to 3.0-20061031. - Updated db to 3.0-20061031. - Remove references to foo2zjs and foo2oak (bug #208851). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 433710d04aa55bc274707dffee8388ab6f6038eb SRPMS/foomatic-3.0.2-39.4.fc6.src.rpm 433710d04aa55bc274707dffee8388ab6f6038eb noarch/foomatic-3.0.2-39.4.fc6.src.rpm c6cfe136313409b1f64de1a6c2b775eeb78962a9 ppc/debug/foomatic-debuginfo-3.0.2-39.4.fc6.ppc.rpm d14516ea5fcb237962e472a63ced9edbf36b649f ppc/foomatic-3.0.2-39.4.fc6.ppc.rpm a59586f9ef420bac8261b9f5426f4ecba03876fc x86_64/foomatic-3.0.2-39.4.fc6.x86_64.rpm 577d31c0c7f97451213e4f5074f4e45f1b278c68 x86_64/debug/foomatic-debuginfo-3.0.2-39.4.fc6.x86_64.rpm 4e5a81e7ac401777e979f83ea871019941b73649 i386/debug/foomatic-debuginfo-3.0.2-39.4.fc6.i386.rpm 125b4480e06495a9cef2891d7e774d1a6381d389 i386/foomatic-3.0.2-39.4.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From gianluca.cecchi at gmail.com Tue Jan 9 23:11:26 2007 From: gianluca.cecchi at gmail.com (Gianluca Cecchi) Date: Wed, 10 Jan 2007 00:11:26 +0100 Subject: [OT] kvm kernel module in fc6? Message-ID: <561c252c0701091511p73488ae4q259d612b71ec3694@mail.gmail.com> Hello, probably more correct to post to fedora extra, but as kernel is also affected, I try to post also here. Sorry for your extra-time. I have an updated fc6 (2.6.18-1.2869.fc6) and I installed the kvm-9-1.i386.rpm package found under extras-development. But this gives me only the user space modified version of qemu (qemu-kvm is the only file included). I'm able to run for example the iso of the fc6 live cd without problem. When running it I'm obviously receiving the message that /dev/kvm is not found and that kvm will so be turned off. In case I want to run Windows inside it, can I find the pre-compiled version of kvm for fc6 anywhere or should I download the source and self compile? I have a quad core system based on a p5b-vm mb so that I would like to test vt technology. Thanks in advance for your help, Gianluca From jkeating at redhat.com Tue Jan 9 23:20:02 2007 From: jkeating at redhat.com (Jesse Keating) Date: Tue, 9 Jan 2007 18:20:02 -0500 Subject: [OT] kvm kernel module in fc6? In-Reply-To: <561c252c0701091511p73488ae4q259d612b71ec3694@mail.gmail.com> References: <561c252c0701091511p73488ae4q259d612b71ec3694@mail.gmail.com> Message-ID: <200701091820.05912.jkeating@redhat.com> On Tuesday 09 January 2007 18:11, Gianluca Cecchi wrote: > Hello, > probably more correct to post to fedora extra, but as kernel is also > affected, I try to post also here. Sorry for your extra-time. > I have an updated fc6 (2.6.18-1.2869.fc6) and I installed the > kvm-9-1.i386.rpm package found under extras-development. > But this gives me only the user space modified version of qemu > (qemu-kvm is the only file included). > I'm able to run for example the iso of the fc6 live cd without problem. > When running it I'm obviously receiving the message that /dev/kvm is > not found and that kvm will so be turned off. > In case I want to run Windows inside it, can I find the pre-compiled > version of kvm for fc6 anywhere or should I download the source and > self compile? > I have a quad core system based on a p5b-vm mb so that I would like to > test vt technology. > Thanks in advance for your help, > Gianluca Please don't cross post. You really shouldn't mix extras-development with Core 6. The two are not designed to work with eachother. For using KVM, you really need the kernel from rawhide (fedora development). However, there be dragons there. Your milage may vary. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From berrange at redhat.com Tue Jan 9 23:21:32 2007 From: berrange at redhat.com (Daniel P. Berrange) Date: Tue, 9 Jan 2007 23:21:32 +0000 Subject: [OT] kvm kernel module in fc6? In-Reply-To: <561c252c0701091511p73488ae4q259d612b71ec3694@mail.gmail.com> References: <561c252c0701091511p73488ae4q259d612b71ec3694@mail.gmail.com> Message-ID: <20070109232132.GB14242@redhat.com> On Wed, Jan 10, 2007 at 12:11:26AM +0100, Gianluca Cecchi wrote: > probably more correct to post to fedora extra, but as kernel is also > affected, I try to post also here. Sorry for your extra-time. > I have an updated fc6 (2.6.18-1.2869.fc6) and I installed the > kvm-9-1.i386.rpm package found under extras-development. > But this gives me only the user space modified version of qemu > (qemu-kvm is the only file included). The kvm package from extras-development is a new addition and will require the coresponding kernel from rawhide, to get the neccessary kernel mods. > I'm able to run for example the iso of the fc6 live cd without problem. > When running it I'm obviously receiving the message that /dev/kvm is > not found and that kvm will so be turned off. > In case I want to run Windows inside it, can I find the pre-compiled > version of kvm for fc6 anywhere or should I download the source and > self compile? Fedora 7 will be the first release to officially support KVM. So if you're trying this on FC6, then you will have to build KVM kernel& userspace bits yourself. > I have a quad core system based on a p5b-vm mb so that I would like to > test vt technology. In FC-6, Xen HVM guests will happily use VT extensions and will be much faster than KVM currently is, not to mention more stable (well for some guest OS at least). Regards, Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=| From buildsys at redhat.com Wed Jan 10 11:00:08 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Wed, 10 Jan 2007 06:00:08 -0500 Subject: rawhide report: 20070110 changes Message-ID: <200701101100.l0AB08Yl011093@hs20-bc2-6.build.redhat.com> Updated Packages: amtu-1.0.4-4.fc7 ---------------- * Tue Jan 09 2007 Steve Grubb 1.0.4-4 - patch fixing network and disk tests anaconda-11.2.0.8-1 ------------------- * Tue Jan 09 2007 Jeremy Katz - 11.2.0.8-1 - Add pata* drivers - Fix segfault with ks= (clumens, #221904) - Fix starting sector for sparc (pjones) - Only ask about vnc if Xvnc is present (dcantrell) - Put a debug button on custom dialogs with flags.debug (pjones) - python2.5 fixes - Fix ftp/http being specified as the url (dcantrell, #220728) - Use a default dhcpclass (dcantrell, #220082) - Add --gaugefor checkisomd5 (Ryan Finnie, #220286) - Don't overly clear the root window text (clumens, #220905) - Handle crazy large disk sizes (clumens, #219414) - Try to fix USB sleeping bits - Translation fix (#221253) - Honor dhcpclass (#220057) autofs-1:5.0.1-0.rc3.5 ---------------------- * Wed Jan 10 2007 Ian Kent - 5.0.1-0.rc3.5 - remove fullstop from Summary tag. - change Buildroot to recommended form. - replace Prereq with Requires. cpuspeed-1:1.2.1-1.51.fc7 ------------------------- * Wed Jan 10 2007 Jarod Wilson - Minor fix for cpuspeed daemon stop function * Tue Jan 09 2007 Jarod Wilson - Turn on ia64 builds (#216702) - Fix status on xen kernels * Tue Jan 09 2007 Jarod Wilson - Move config file to /etc/sysconfig/cpuspeed, more appropriate for initscript configs (#152305) - Manify 'cpuspeed --help' along with other details (#172655) - Tweak cpuspeed default thresholds (#147565) dejavu-lgc-fonts-2.13-1 ----------------------- * Tue Jan 09 2007 Behdad Esfahbod - 2.13-1 - Update to 2.13 - Use .bz2 tarball evolution-data-server-1.9.5-2.fc7 --------------------------------- * Tue Jan 09 2007 Matthew Barnes - 1.9.5-2.fc7 - Require libsoup-devel in devel subpackage (RH bug #152482). evolution-webcal-2.9.5-1.fc7 ---------------------------- * Tue Jan 09 2007 Matthew Barnes - 2.9.5-1.fc7 - Update to 2.9.5 - Update version requirements to match configure.ac. fetchmail-6.3.6-1.fc7 --------------------- * Sat Jan 06 2007 Miloslav Trmac - 6.3.6-1 - Update to fetchmail-6.3.6 (CVE-2006-5867, CVE-2006-5974) file-4.19-1.fc7 --------------- * Tue Jan 09 2007 Martin Bacovsky - 4.19-1.fc7 - Resolves: #208880 - Pointless file(1) error message while detecting ELF 64-bit file thanks to for patch - Resolves: #214992 - file-devel should own /usr/include/* /usr/lib/lib*.so - Resolves: #203548 - a -devel package should be split out for libmagic - upgrade to new upstream 4.19 - patch revision and cleaning - split package to file, file-devel and file-libs * Wed Aug 23 2006 Martin Bacovsky - 4.17-8 - fix recognition of perl script with embed awk (#203610) * Fri Aug 18 2006 Martin Bacovsky - 4.17-7 - fix recognition of bash script with embed awk (#202185) foomatic-3.0.2-44.fc7 --------------------- * Tue Jan 09 2007 Tim Waugh 3.0.2-44 - Removed m2300w files (bug #203381). freetype-2.2.1-16.fc7 --------------------- * Tue Jan 09 2007 Behdad Esfahbod 2.2.1-16 - Backport binary-search fixes from HEAD - Add freetype-2.2.1-ttcmap.patch - Resolves: #208734 - Fix rendering issue with some Asian fonts. - Add freetype-2.2.1-fix-get-orientation.patch - Resolves: #207261 - Copy non-X demos even if not compiling with_xfree86. - Add freetype-2.2.1-zero-item-size.patch, to fix crasher. - Resolves #214048 - Add X11_PATH=/usr to "make"s, to find modern X. - Resolves #212199 * Mon Sep 11 2006 Behdad Esfahbod 2.2.1-10 - Fix crasher https://bugs.freedesktop.org/show_bug.cgi?id=6841 - Add freetype-2.2.1-memcpy-fix.patch * Thu Sep 07 2006 Behdad Esfahbod 2.2.1-9 - Add BuildRequires: libX11-devel (#205355) gdb-6.5-23.fc7 -------------- * Tue Jan 09 2007 Jan Kratochvil - 6.5-23 - Find symbols properly at their original (included) file (BZ 109921). - Remove the stuck mock(1) builds disfunctional workaround (-> mock BZ 221351). gimp-print-4.2.7-23.fc7 ----------------------- * Tue Dec 12 2006 Tim Waugh 4.2.7-23 - Fixed build (mkinstalldirs problem). - Set POSIX locale when parsing lpstat output (bug #219017). gtk2-2.10.7-2.fc7 ----------------- * Tue Jan 09 2007 Behdad Esfahbod - 2.10.7-2 - Configure with --with-included-loaders=png. Saves a page per process * Thu Dec 21 2006 Matthias Clasen - 2.10.7-1 - Make gdk_pixbuf_loader_close() idempotent - Always emit the closed signal when the loader is closed * Thu Dec 21 2006 Matthias Clasen - 2.10.6-8 - Make update scripts handle slight variations in $host htdig-3:3.2.0b6-9.fc7 --------------------- * Tue Jan 09 2007 Adam Tkac 3:3.2.0b6-9.fc7 - added +i option to rundig script. This option enables incremental digging icu-3.6-14 ---------- * Tue Jan 09 2007 Caolan McNamara - 3.6-14 - Related: rhbz#216089 add icu.icuXXXX.safety.patch iptables-1.3.7-1 ---------------- * Tue Jan 09 2007 Thomas Woerner 1.3.7-1 - new verison 1.3.7 - iptc is not a public interface and therefore not installed anymore - dropped upstream secmark patch * Tue Sep 19 2006 Thomas Woerner 1.3.5-2 - added secmark iptables patches (#201573) kbd-1.12-21 ----------- * Tue Jan 09 2007 Miloslav Trmac - 1.12-21 - Add a "ko" (Korean) keyboard layout, equivalent to the "us" layout Resolves: #220151 krb5-1.5-15 ----------- * Tue Jan 09 2007 Nalin Dahyabhai - 1.5-15 - apply fixes from Tom Yu for MITKRB5-SA-2006-002 (CVE-2006-6143) (#218456) - apply fixes from Tom Yu for MITKRB5-SA-2006-003 (CVE-2006-6144) (#218456) * Mon Oct 23 2006 Nalin Dahyabhai - 1.5-11 - don't bail from the KDC init script if there's no database, it may be in a different location than the default (fenlason) - remove the [kdc] section from the default krb5.conf -- doesn't seem to have been applicable for a while * Wed Oct 18 2006 Nalin Dahyabhai - 1.5-10 - rename krb5.sh and krb5.csh so that they don't overlap (#210623) - way-late application of added error info in kadmind.init (#65853) libdhcp-1.17-3.fc7 ------------------ * Tue Jan 09 2007 David Cantrell - 1.17-3 - Set IFF_UP and IFF_RUNNING flags on interface before trying to get a DHCP lease. Fixes a problem with DHCP failing in anaconda using 2.6.19 and higher kernels (#221392). libselinux-1.33.3-3.fc7 ----------------------- * Fri Jan 05 2007 Dan Walsh - 1.33.3-3 - Cleanup patch libsemanage-1.9.2-1.fc7 ----------------------- * Fri Dec 22 2006 Dan Walsh - 1.9.2-1 - Upgrade to latest from NSA * Merged patch to optionally reduce disk usage by removing the backup module store and linked policy from Karl MacMillan * Merged patch to correctly propagate return values in libsemanage logrotate-3.7.4-9.fc7 --------------------- * Tue Jan 09 2007 Peter Vrabec 3.7.4-9 - allow multibyte characters in readPath() (#122145) man-1.6e-2.fc7 -------------- * Tue Jan 09 2007 Ivana Varekova - 1.6e-2 - Resolves: 221868 man use incorrect groff option - spec file cleanup * Mon Dec 11 2006 Ivana Varekova - 1.6e-1 - update to 1.6e * Thu Oct 26 2006 Ivana Varekova - 1.6d-3 - add MAKEWHATISDBUPDATES option (bug 210501) nmap-2:4.20-1 ------------- * Tue Jan 09 2007 Florian La Roche - version 4.20 pango-1.15.3-2.fc7 ------------------ * Tue Jan 09 2007 Behdad Esfahbod - 1.15.3-2 - Update sources * Tue Jan 09 2007 Behdad Esfahbod - 1.15.3-1 - Update to 1.15.3 - Pass --with-included-modules=basic-fc. Saves one page of memory per process. policycoreutils-1.33.10-1.fc7 ----------------------------- * Tue Jan 09 2007 Dan Walsh 1.33.10-1 - Update to upstream * Merged patch to correctly handle a failure during semanage handle creation from Karl MacMillan. * Merged patch to fix seobject role modification from Dan Walsh. rhpl-0.198-1 ------------ * Tue Jan 09 2007 David Cantrell - 0.198-1 - Conflicts with kbd < 1.12-21 * Tue Jan 09 2007 Paul Nasrat - 0.197-1 - Fix Korean keyboard (#212280) vte-0.15.1-1.fc7 ---------------- * Tue Jan 09 2007 Behdad Esfahbod 0.15.1-1 - Update to 0.15.1 xorg-x11-server-1.1.1-57.fc7 ---------------------------- * Tue Jan 09 2007 Adam Jackson 1.1.1-57 - xorg-xserver-1.1.0-dbe-render.diff: CVE #2006-6101 - xorg-x11-server-1.1.0-redhat-xephyr-only-hack.patch: Skip building the non-Xephyr kdrive servers entirely. Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From harald at redhat.com Wed Jan 10 15:57:34 2007 From: harald at redhat.com (Harald Hoyer) Date: Wed, 10 Jan 2007 10:57:34 -0500 Subject: Fedora Core 6 Test Update: udev-095-17.fc6 Message-ID: <200701101557.l0AFvYYq029116@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-038 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 6 Name : udev Version : 095 Release : 17.fc6 Summary : A userspace implementation of devfs Description : The udev package contains an implementation of devfs in userspace using sysfs and netlink. --------------------------------------------------------------------- Update Information: This update contains various bugfixes found in the RHEL beta phase. --------------------------------------------------------------------- * Tue Jan 9 2007 Harald Hoyer - 095-17.fc6 - merge RHEL bugfixes - Resolves: rhbz#220543 * Mon Dec 18 2006 Harald Hoyer - 095-14.5.fc6 - added symlink to /sbin/dasd_id (#219181) - added more debugging possibilities (#219621) - Resolves: rhbz#219181, rhbz#219621 * Thu Dec 14 2006 Harald Hoyer - 095-14.4.fc6 - fixed typo - Resolves: rhbz#219113 * Fri Dec 8 2006 Harald Hoyer - 095-14.3.fc6 - load ide-scsi module for tape devices (#207248,#219113) - Resolves: rhbz#219113 * Mon Nov 27 2006 Harald Hoyer - 095-14.2.fc6 - PnP rule added (rhbz#216515) - Resolves: rhbz#216515 * Mon Nov 20 2006 Harald Hoyer - 095-14.1.fc6 - Do not ignore dm devices completly (rhbz#204157, rhbz#214639) - Remove tty devices from udev.nodes (rhbz#209204) - Resolves: rhbz#204157, rhbz#214639, rhbz#209204 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ e30c63f17b91325cccb10778ed9f32bda9a164ed SRPMS/udev-095-17.fc6.src.rpm e30c63f17b91325cccb10778ed9f32bda9a164ed noarch/udev-095-17.fc6.src.rpm 4e9b40f3527a58f1e91632c1917f1b52016539f9 ppc/libvolume_id-devel-095-17.fc6.ppc.rpm 5531038dcf2db867d7de4d7d22e7dccec7ad1290 ppc/udev-095-17.fc6.ppc.rpm 7de532d33d762aca19c195423a9ea6370f2c4a9a ppc/libvolume_id-095-17.fc6.ppc.rpm 9e7799549e48a56612261bb6df6f1375d0de6974 ppc/debug/udev-debuginfo-095-17.fc6.ppc.rpm 58c563c3e15eecdba161ffc85fee4b7a37e8532d x86_64/libvolume_id-devel-095-17.fc6.x86_64.rpm d517fbfb716f64c67a5d9a1359436a251f1ff868 x86_64/libvolume_id-095-17.fc6.x86_64.rpm ad8d8fd1faa0268354fae98e2335dd0cfb3b3d2e x86_64/udev-095-17.fc6.x86_64.rpm 6548ea18e61836fcfcbf54d88c2d0b2c0dd1a6d7 x86_64/debug/udev-debuginfo-095-17.fc6.x86_64.rpm c5238cb33f1161f025b50ba313b83771b746ad76 i386/libvolume_id-devel-095-17.fc6.i386.rpm 06144f1bf011a4af12067a7a7df21cd3585d43ed i386/udev-095-17.fc6.i386.rpm c132273128468bb9b2c7f1a23a57985e41442a89 i386/libvolume_id-095-17.fc6.i386.rpm f18c96ee447428f415a671878fa29b383cdff63b i386/debug/udev-debuginfo-095-17.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From jakub at redhat.com Wed Jan 10 15:59:00 2007 From: jakub at redhat.com (Jakub Jelinek) Date: Wed, 10 Jan 2007 10:59:00 -0500 Subject: Fedora Core 5 Test Update: gcc-4.1.1-51.fc5 Message-ID: <200701101559.l0AFx0qT029707@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-039 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 5 Name : gcc Version : 4.1.1 Release : 51.fc5 Summary : Various compilers (C, C++, Objective-C, Java, ...) Description : The gcc package contains the GNU Compiler Collection version 4.1. You'll need this package in order to compile C code. --------------------------------------------------------------------- * Mon Jan 8 2007 Jakub Jelinek 4.1.1-51.fc5 - update from gcc-4_1-branch (-r120325:120507) - PRs c++/30382, middle-end/27826, middle-end/28116, tree-optimization/30212 * Thu Jan 4 2007 Jakub Jelinek 4.1.1-51 - fix complex division with -std=c99 or -std=gnu99 (PR c/30360) * Wed Jan 3 2007 Jakub Jelinek 4.1.1-50 - fix preprocessor defines in assembly preprocessed with -std=... (Steven Bosscher, PR c/25993) - fix PCH creation with templates (Jason Merrill, PR c++/28217) - fix dwarf2out ICE (Alexandre Oliva, #217529, PR debug/30189) * Tue Jan 2 2007 Jakub Jelinek 4.1.1-49 - update from gcc-4_1-branch (-r120062:120325) - PRs debug/26964, fortran/30200, libfortran/30145 - fix endless recursion in negate_expr/fold_unary (PR middle-end/30286) - fix cpp problem on empty source files (Tom Tromey, PR preprocessor/30001) - improve constructor disambiguation (Mark Mitchell, PR c++/28261, PR c++/29535) - fix handling of non-NULL attribute on nested functions (Andrew Pinski, PR tree-opt/30045) - fix ICE with friend templatized static member function (PR c++/29054) * Wed Dec 20 2006 Jakub Jelinek 4.1.1-48 - update from gcc-4_1-branch (-r119833:120062) - PRs libstdc++/11953 - fix ia64 EH region boundaries where last br.call in the region is not at the end of a bundle (#219596, PR target/30230) - fix DI resp. TImode __sync_*_compare_and_swap on i?86 resp. x86_64 (Kazu Hirata, #220258, PR target/27266) - fix asm vs. nested functions or OpenMP (#220250, PRs middle-end/30262, middle-end/30263) - fix handling of complex shared OpenMP vars (Andrew Pinski, PR middle-end/30143) * Thu Dec 14 2006 Jakub Jelinek 4.1.1-47 - fix ia64 prologue generation (Andreas Schwab, #219594, PR target/29166) - fix ppc64 divdi3 (PR target/30185) * Wed Dec 13 2006 Jakub Jelinek 4.1.1-46 - update from gcc-4_1-branch (-r119654:119833) - PRs c++/27316, c++/28740, c++/29732, fortran/29820, fortran/29821, fortran/29912, fortran/29916, fortran/30003, libstdc++/26497, libstdc++/28125, libstdc++/28265, target/30039 - fix loop unswitching (Zdenek Dvorak, #219138, PR rtl-optimization/30113) * Fri Dec 8 2006 Jakub Jelinek 4.1.1-45 - update from gcc-4_1-branch (-r119343:119654) - PRs c++/14329, c++/28284, c++/29632, c++/29728, c++/29729, c++/29730, c++/29733, c++/30022, libfortran/29810 - add protoize.1 and unprotoize.1 man pages (#188914) - fix RTL sharing problem in combine (#218603, PR rtl-optimization/27761) - additions to libgcj-src (Ben Konrath, PR libgcj/30110) * Fri Dec 1 2006 Jakub Jelinek 4.1.1-44 - fix OpenMP loops with 0 iterations (PR libgomp/29947) * Thu Nov 30 2006 Jakub Jelinek 4.1.1-43 - update from gcc-4_1-branch (-r119167:119343) - PRs c++/29022, fortran/29391, fortran/29489, fortran/29982, libgfortran/29936, target/29319, tree-opt/29964 - fix -fopenmp ICEs on omp constructs where the body never returns (PR middle-end/29965) * Fri Nov 24 2006 Jakub Jelinek 4.1.1-42 - update from gcc-4_1-branch (-r119021:119167) - fix s390{,x} __sync_* builtins - fix ppc64 libffi unwind info * Thu Nov 23 2006 Jakub Jelinek 4.1.1-41 - fix ICE with -fopenmp -fexceptions on ia64 (#216988, PR c/29955) - fix parsing of C++ if/switch/etc. conditions (PR c++/29886) * Wed Nov 22 2006 Jakub Jelinek 4.1.1-40 - disallow multiple vector_size attributes (PR c/29736) - don't ICE on main returning int with vector_size attribute (PR c++/29735) - hide symbols that shouldn't be exported from libgcj.so (GC_*, ffi_*, lt_* etc., #216120) * Mon Nov 20 2006 Jakub Jelinek 4.1.1-39 - update from gcc-4_1-branch (-r118891:119021) - PRs middle-end/26306, middle-end/29753, target/18553, target/29114, target/29449, tree-opt/29788, tree-optimization/28888 - fix some C++ vector conversions (PR c++/29734) - fix C++ ICE with value dependent const brace enclosed initializer (PR c++/29570) * Thu Nov 16 2006 Jakub Jelinek 4.1.1-38 - update from gcc-4_1-branch (-r118805:118891) - PRs rtl-optimization/29797 - fix forwprop switch optimization (PR middle-end/29584) - remove old *34* provides (#215839) * Tue Nov 14 2006 Jakub Jelinek 4.1.1-37 - fix up check_effective_target_fopenmp tcl test for the testsuite framework backport changes * Tue Nov 14 2006 Jakub Jelinek 4.1.1-36 - update from gcc-4_1-branch (-r118571:118805) - PRs c++/29106, c++/29518, fortran/24518, fortran/29216, fortran/29314, fortran/29371, fortran/29387, fortran/29392, fortran/29490, fortran/29565, fortran/29630, fortran/29679, fortran/29713, middle-end/21032, testsuite/28703, tree-opt/28545 - honor initial conditions and variable types in conversion to perfect nesting for -ftree-loop-linear optimizations (#209297, PR tree-optimization/29581) * Sat Nov 11 2006 Jakub Jelinek 4.1.1-35 - fix libgcj_bc.so dummy lib on i?86/x86_64/ia64/s390/s390x * Sat Nov 11 2006 Jakub Jelinek 4.1.1-34 - fix ICE on Fortran !$omp continued line followed by !$ conditional line (PR fortran/29759) * Wed Nov 8 2006 Jakub Jelinek 4.1.1-33 - update from gcc-4_1-branch (-r118468:118571) - PRs fortran/24398, fortran/27701, fortran/29098, fortran/29115, fortran/29211, fortran/29232, fortran/29364, fortran/29373, fortran/29407, libfortran/29627, tree-optimization/29610 - fix # handling in libcpp when switching from system header to non-system header or main source (PR preprocessor/29612) - fix gcc configury detection of ld COMDAT support * Sat Nov 4 2006 Jakub Jelinek 4.1.1-32 - update from gcc-4_1-branch (-r118025:118468) - PRs bootstrap/28400, fortran/29067, libgfortran/29563, middle-end/29250, rtl-optimization/28970, rtl-optimization/29631, target/29377, tree-optimization/27891 - fix infinite recursion in make_vector_type (#212848, PR tree-optimization/29637) - merge gomp fixes from the trunk (-r118133:118134) - PR fortran/29629 - fix A < 0 ? : 0 optimization (#213821, PR middle-end/29695) - fix ICE in gfc_get_derived_type (Paul Thomas, #212936, PR fortran/29641) * Wed Oct 25 2006 Jakub Jelinek 4.1.1-31 - update from gcc-4_1-branch (-r117629:118025) - PRs c++/20647, c++/25878, c++/26884, c++/27787, c++/28506, c++/28906, c++/29020, c++/29175, c++/29318, c++/29408, c++/29435, c/27184, c/29092, fortran/25091, fortran/25092, fortran/29284, fortran/29321, fortran/29322, fortran/29393, fortran/29403, gcov/profile/26570, inline-asm/29119, middle-end/20491, rtl-optimization/29323, target/25519, target/28825, target/28960, target/29300, testsuite/28829, tree-optimization/26969 - fix libstdc++.so backwards compatibility with GCC 3.4.x (#210452) - fix always_inline attribute at -O0 (Jan Hubicka, PR middle-end/29241) - fix function local static vars with used attribute (Jan Hubicka, Richard Guenther, PR middle-end/29299) * Wed Oct 11 2006 Jakub Jelinek 4.1.1-30 - update from gcc-4_1-branch (-r117464:117629) - PRs c++/28302, c++/28349, c++/28450, c++/29002, libstdc++/29095, libstdc++/29354, libstdc++/29368, target/28490 - fix gnu.xml.transform.TransformerImpl (Tom Tromey, #208854, PR classpath/29362) * Fri Oct 6 2006 Jakub Jelinek 4.1.1-29 - update from gcc-4_1-branch (-r117266:117464) - PRs bootstrap/26764, bootstrap/27334, c++/29080, c++/29138, c++/29226, c/27489, c/27490, debug/28980, fortran/18791, libfortran/18791, middle-end/28862, objc/29195, other/25035, tree-opt/28952 - fix s390{,x} address legitimization with TLS symbols (Angel Nunez Mencias) - fix -fno-automatic with Fortran auto arrays with non-constant size (#203928, PR fortran/28415) - fix char and short __sync_fetch_and_XXX (PR target/28924) - fix emitting of vector constants with incomplete initializers (PR c/29091) - fix ICE with multiple exit loop and -ftree-loop-linear (#208935, PR tree-optimization/29290) * Sat Sep 30 2006 Jakub Jelinek 4.1.1-28 - fix i386/x86_64 legitimize_pic_address with TLS symbols (PR target/29198) - fix gimplification of post-increment with side-effects on the inner expression (PR c/29154) * Thu Sep 28 2006 Jakub Jelinek 4.1.1-27 - update from gcc-4_1-branch (-r117225:117266) - PR target/29230 - restrict single entry mem{{,p}cpy,move,set} optimization to vars and components thereof (PR middle-end/29272) * Tue Sep 26 2006 Jakub Jelinek 4.1.1-26 - update from gcc-4_1-branch (-r117162:117225) - PRs classpath/28661, libgcj/29178, libstdc++/29179, libstdc++/29224 - fix unwind info generation, broken in gcc-4.1.1-21 (Roger Sayle, PR debug/29132) * Sat Sep 23 2006 Jakub Jelinek 4.1.1-25 - update from gcc-4_1-branch (-r117069:117162) - PRs c++/28996, c++/29087, middle-end/26983 - fix -fprofile-use with anonymous namespaces (Jan Hubicka, PRs profile/20815, profile/26399) - fix #pragma omp parallel and #pragma omp section that call nested functions (PRs middle-end/25261, middle-end/28790) * Wed Sep 20 2006 Jakub Jelinek 4.1.1-24 - update from gcc-4_1-branch (-r117000:117069) - PRs fortran/21918, fortran/28526, fortran/28817, fortran/29060, fortran/29101, middle-end/27226, middle-end/4520, tree-optimization/28900 - add support for Fortran OpenMP conditional inclusion (PR fortran/29097) - add some -D_FORTIFY_SOURCE compile time strncat buffer overflow checks * Sun Sep 17 2006 Jakub Jelinek 4.1.1-23 - update from gcc-4_1-branch (-r116958:117000) - PRs fortran/29051, target/28946 - fix single entry mem{{,p}cpy,move,set} optimization (Andrew Pinski, PR tree-opt/29059) * Fri Sep 15 2006 Jakub Jelinek 4.1.1-22 - update from gcc-4_1-branch (-r116778:116958) - PRs ada/21952, ada/29025, c++/26957, fortran/28890, fortran/28923, fortran/28959, libfortran/28890, libfortran/28923, libfortran/28947, middle-end/28493, other/23541, other/26507, rtl-optimization/28243, rtl-optimization/28634, rtl-optimization/28636, rtl-optimization/28726, target/13685, target/26504, target/27537, target/27681, target/28621, target/29006, testsuite/28950, testsuite/29007 - fix #pragma omp atomic (PR middle-end/28046) - speed up dominance frontiers calculation (Jan Hubicka) - fix gcc-gfortran %doc (#206333) - fix gcc-debuginfo (#205500) * Fri Sep 8 2006 Jakub Jelinek 4.1.1-21 - update from gcc-4_1-branch (-r116498:116778) - PRs c++/19809, c++/26102, c++/26195, c++/26571, c++/26670, c++/26671, c++/26696, c++/26917, c++/28860, c++/28878, c++/28886, fortran/20067, fortran/24866, fortran/25077, fortran/25102, fortran/28005, fortran/28873, fortran/28885, fortran/28908, libfortran/28005, middle-end/27724, middle-end/28814, other/22313, rtl-optimization/27616, rtl-optimization/28386, target/24367 - add primitive class object symbols to libgcj_bc.so (Tom Tromey, PR libgcj/28698) - optimize single entry memcpy/mempcpy/memmove/memset already at the tree level (PR middle-end/27567) - add dependencies to *-devel subpackages, so that e.g. ppc64 libstdc++-devel requires 64-bit libstdc++, similarly for libgcj-devel and libgcj/zlib-devel * Fri Aug 25 2006 Jakub Jelinek 4.1.1-20 - update from gcc-4_1-branch (-r116389:116498) - PRs c++/28056, c++/28058, c++/28595, c++/28853, c/27558, c/27893, c/28299, c/28418, driver/27622, libfortran/28452, libfortran/28542, target/27075 - optimize A / (B << N) where A and B is positive and B is a power of two (Alan Modra, #195924, PR rtl-optimization/26026) - fix attribute handling in C++ (Jason Merrill, #204277, #204035, PRs c++/28659, c++/28863) * Fri Aug 25 2006 Jakub Jelinek 4.1.1-19 - update from gcc-4_1-branch (-r116223:116389) - PRs c++/23372, c++/27714, c++/28346, c++/28385, fortran/18111, fortran/20886, fortran/25217, fortran/25828, fortran/28425, fortran/28496, fortran/28601, fortran/28630, fortran/28660, fortran/28735, fortran/28762, fortran/28771, fortran/28788, libstdc++/28765, target/27565 - fix ICE in add_reg_br_prob_note (PR middle-end/28683) * Fri Aug 18 2006 Jakub Jelinek 4.1.1-18 - update from gcc-4_1-branch (-r116176:116223) - PRs c++/28593, c++/28606, c++/28710, c/27697, middle-end/20256, middle-end/25211, middle-end/26435 - don't waste .rodata space when copying from const array with large entries (PR middle-end/28755) - fix --combine with anonymous structures in unions (Alexandre Oliva, PR c/27898) - rebuilt with latest binutils to pick up 64K -z commonpagesize on ppc* (#203001) * Wed Aug 16 2006 Jakub Jelinek 4.1.1-17 - update from gcc-4_1-branch (-r116082:116176) - PRs c++/27894, c++/28677, c/28649, middle-end/28075, rtl-optimization/23454 - merge gomp fixes from the trunk (-r116152:116154) - PRs middle-end/28713, middle-end/28724 - add -march=geode and -mtune=geode support (Vlad Makarov) - use %gs rather than %fs register on x86_64 with -mcmodel=kernel -fstack-protector (Arjan van de Ven, #202842) - don't create jar manifest in libgcj-tools-4.*.jar (#200887) - externally_visible attribute fixes (Jan Hubicka, PRs c/25795, c++/27369) - --combine fixes for aggregates with attributes (PRs c/28706, c/28712) - further externally_visible attr fixes (PR c/28744) - fix invalid token pasting error message (PR preprocessor/28709) - obey OpenMP 2.5 chapter 4 env var requirements (whitespace rules and case insensitivity in the env vars; PR libgomp/28725) - fix OPT_FLAGS on sparc * Sat Aug 12 2006 Jakub Jelinek 4.1.1-16 - fix multilib conflict in libgcj-tools-4.1.1.jar (#200887) * Fri Aug 11 2006 Jakub Jelinek 4.1.1-15 - update from gcc-4_1-branch (-r115877:116082) - PRs c++/27508, c++/28148, c++/28250, c++/28256, c++/28257, c++/28259, c++/28267, c++/28274, c++/28347, c++/28432, c++/28557, c++/28594, c++/28637, c++/28638, c++/28639, c++/28640, c++/28641, c/27721, c/28136, fortran/27981, fortran/28548, fortran/28590, middle-end/28651, rtl-optimization/27291, rtl-optimization/28221, target/27566, target/27827 - fix Fortran ICE with nested function (Paul Thomas, #200618, PR fortran/28600) * Wed Aug 2 2006 Jakub Jelinek 4.1.1-14 - update from gcc-4_1-branch (-r115644:115877) - PRs c++/27572, c++/27668, c++/27962, c++/28025, c++/28258, c++/28523, debug/25468, fortran/20892, fortran/27874, fortran/28129, fortran/28439, libgfortran/28335, libgfortran/28339, middle-end/28402, middle-end/28403, middle-end/28473, target/27287, target/28247, tree-optimization/26719, tree-optimization/27639, tree-optimization/27795, tree-optimization/28029, tree-optimization/28238 - BuildRequire firefox-devel instead of mozilla-devel * Tue Jul 25 2006 Alexandre Oliva 4.1.1-13 - backport fix by Andrew Haley for build problems related with the bootstrap ClassLoader * Mon Jul 24 2006 Alexandre Oliva 4.1.1-12 - backport fix by Mark Wielaard for NullPointerException in GCJ web plugin * Fri Jul 21 2006 Jakub Jelinek 4.1.1-11 - update from gcc-4_1-branch (-r115565:115644) - PRs target/27363, c++/27495, c++/28048, c++/28235, c++/28337, c++/28338, c++/28363, middle-end/28283 * Tue Jul 18 2006 Jakub Jelinek 4.1.1-9 - update from gcc-4_1-branch (-r115330:115565) - PRs c++/28016, c++/28051, c++/28249, c++/28291, c++/28294, c++/28304, c++/28343, c/26993, c/28286, fortran/20844, fortran/20893, fortran/20903, fortran/25097, fortran/27980, fortran/28201, fortran/28353, fortran/28384, libstdc++/27878, tree-optimization/19505, tree-optimization/28162, tree-optimization/28187 - fix directory traversal issue in fastjar (Richard Guenther, CVE-2006-3619, PR fastjar/28359) - fix ICE on complex assignment in nested fn (Richard Henderson, PR middle-end/27889) - fix __builtin_constant_p in initializers (Mark Shinwell, #198849) - fix tree verification - IDENTIFIER_NODE can be shared (Diego Novillo) - fix duplicate_eh_regions - handle > 99 tree dumps in the testsuite * Sat Jul 15 2006 Jakub Jelinek 4.1.1-8 - fix handling of C++ template static data members in anonymous namespace (PR c++/28370) - fix Fortran OpenMP handling of !$omp parallel do with lastprivate on the iteration variable (PR fortran/28390) - backported reassociation pass rewrite (Daniel Berlin, Jeff Law, Roger Sayle, Peter Bergner, PRs ada/24994, tree-optimization/26854) - BuildReq sharutils for uuencode * Tue Jul 11 2006 Jakub Jelinek 4.1.1-7 - update from gcc-4_1-branch (-r115058:115330) - PRs c++/13983, c++/17519, c++/18681, c++/18698, c++/26577, c++/27019, c++/27424, c++/27768, c++/27820, c++/28114, fortran/23420, fortran/23862, fortran/24748, fortran/26801, fortran/27965, fortran/28081, fortran/28094, fortran/28167, fortran/28174, fortran/28213, fortran/28237, middle-end/27428, target/28084, target/28207, tree-optimization/28218 - fix ppc insvdi_internal2/3 (David Edelsohn, Alan Modra, #197755, PR target/28170) - avoid TFmode PRE_INC/PRE_DEC on ppc (David Edelsohn, PR target/28150) * Thu Jun 29 2006 Jakub Jelinek 4.1.1-6 - update from gcc-4_1-branch (-r114766:115058) - PRs c++/27821, c++/28109, c++/28110, c++/28112, fortran/16206, fortran/18769, fortran/19310, fortran/19904, fortran/20867, fortran/20874, fortran/20876, fortran/22038, fortran/25049, fortran/25050, fortran/25056, fortran/25073, fortran/27554, fortran/27715, fortran/27784, fortran/27895, fortran/27958, fortran/28118, fortran/28119, libfortran/27784, libfortran/27895, libgcj/28178, middle-end/28045, middle-end/28151, target/27082, target/27861, tree-optimization/27781 - fix a reload problem that lead sometimes to writes to read-only objects (Bernd Schmidt, #196736, PR middle-end/26991, PR rtl-optimization/25636) - ppc -mcpu=power6 initial support (Pete Steinmetz, #195924) * Tue Jun 20 2006 Jakub Jelinek 4.1.1-5 - fix C++ #pragma omp atomic (Mark Mitchell) * Mon Jun 19 2006 Jakub Jelinek 4.1.1-4 - update from gcc-4_1-branch (-r114555:114766) - PRs bootstrap/22541, c++/21210, c++/26559, c++/27227, c++/27648, c++/27665, c++/27666, c++/27689, c++/27884, c++/27933, c++/27951, fortran/27786, java/28024, middle-end/27733, middle-end/27802, target/27858, tree-optimization/27830 - merge gomp changes from the trunk (-r114642:114643) - PR libgomp/28008 - fix -fmerge-all-constants - fix #pragma omp critical handling if not --enable-linux-futex * Tue Jun 13 2006 Jakub Jelinek 4.1.1-3 - add BuildRequires for elfutils-devel on ia64 - fix a reload bug visible on s390x (Andreas Krebbel, #193912, PR middle-end/27959) * Mon Jun 12 2006 Jakub Jelinek 4.1.1-2 - update from gcc-4_1-branch (-r114107:114555) - PRs ada/27769, c++/20173, c++/26068, c++/26433, c++/26496, c++/27177, c++/27385, c++/27447, c++/27451, c++/27601, c++/27713, c++/27716, c++/27722, c++/27801, c++/27806, c++/27807, c++/27819, c/25161, c/26818, c/27020, c/27718, fortran/14067, fortran/16943, fortran/18003, fortran/19015, fortran/19777, fortran/20839, fortran/20877, fortran/23091, fortran/23151, fortran/24168, fortran/24558, fortran/25047, fortran/25058, fortran/25082, fortran/25090, fortran/25098, fortran/25147, fortran/25746, fortran/26551, fortran/27155, fortran/27320, fortran/27411, fortran/27449, fortran/27470, fortran/27524, fortran/27552, fortran/27584, fortran/27613, fortran/27655, fortran/27662, fortran/27709, fortran/27897, libgcj/26483, libgfortran/24459, libgfortran/27757, middle-end/27743, middle-end/27793, target/25758, target/26223, target/27790, target/27842, testsuite/27705, tree-optimization/26242, tree-optimization/26622 - merge gomp changes from the trunk (-r114518:114520 and -r114524:114525) - PRs preprocessor/27746, c/27747, c++/27748, fortran/27916 - don't generate decls with the same DECL_UID in C++ FE (PR middle-end/27793) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ 1a3a15e031444339a0ccd21ba7bab3333e9d89d2 SRPMS/gcc-4.1.1-51.fc5.src.rpm 1a3a15e031444339a0ccd21ba7bab3333e9d89d2 noarch/gcc-4.1.1-51.fc5.src.rpm 4c96825ff4cbecf3fccbd49918bf3a6deae545b0 ppc/libstdc++-4.1.1-51.fc5.ppc.rpm a835d50e97ef0a39f97dd82009adce689ab7a981 ppc/libgcc-4.1.1-51.fc5.ppc.rpm c00a34b1b7caad6d6b1d35483f678c8641902ef2 ppc/gcc-java-4.1.1-51.fc5.ppc.rpm db7aadcd7a2890e72bbccfc13da32d4bd59d542a ppc/libgcj-4.1.1-51.fc5.ppc.rpm ff9edea3d39319c1c46e94c4f2894767578aa1a4 ppc/gcc-objc-4.1.1-51.fc5.ppc.rpm 2a58e4112ae809ce0885e26392a6c5a601c85437 ppc/libmudflap-devel-4.1.1-51.fc5.ppc.rpm 1c2120d581d35f41c285182fe40add2bb22fde41 ppc/libgomp-4.1.1-51.fc5.ppc.rpm 441f8b09840e716ca38eeacffb791e1f7c32c0ea ppc/gcc-gfortran-4.1.1-51.fc5.ppc.rpm 8a0866c04715bf1835408db1916c6a17e687e84a ppc/gcc-c++-4.1.1-51.fc5.ppc.rpm bfd09ad4f28f66099c981ec9f77e8fb0c16bf5d2 ppc/libgcj-devel-4.1.1-51.fc5.ppc.rpm 750bc0c9f78a62eba3c479abb9a5a2e223919d9f ppc/libstdc++-devel-4.1.1-51.fc5.ppc.rpm 922c9b6449f2c9ec6249c36f1be7b92d5ca1a9f6 ppc/libobjc-4.1.1-51.fc5.ppc.rpm 78b0b3ed13c14397fa7f5de7f837771fa2a77799 ppc/cpp-4.1.1-51.fc5.ppc.rpm 765ef519c1d848023f88e6cf0bba2d1a5f2e52ce ppc/debug/gcc-debuginfo-4.1.1-51.fc5.ppc.rpm 02e8ee0e67e69941fc8fcfd462c5c319ef395d2d ppc/gcc-4.1.1-51.fc5.ppc.rpm fd8eb16e7c540afe3e0742d591e6ae5e969f3146 ppc/gcc-objc++-4.1.1-51.fc5.ppc.rpm aab619796c3c32aaade6d6e47cf6b250e88eedfa ppc/libgfortran-4.1.1-51.fc5.ppc.rpm 43dc47b4272e43629ad02c712b8c1001359f6560 ppc/libmudflap-4.1.1-51.fc5.ppc.rpm ef47771bf37b6f5e16bc8b0d577f4c5e842983a4 ppc/libgcj-src-4.1.1-51.fc5.ppc.rpm 35a7f0cc598cd967a36dd2461b8e82ac58ba6a2d x86_64/gcc-4.1.1-51.fc5.x86_64.rpm 76f5143979c8f7758d8af588430125ef0373f58e x86_64/libmudflap-devel-4.1.1-51.fc5.x86_64.rpm 88cbb72e5c98d46dcacdf4fd19531024a146e50f x86_64/gcc-c++-4.1.1-51.fc5.x86_64.rpm 8bbcafd34c658b5ba4e764a7038449a62387537e x86_64/libgcj-devel-4.1.1-51.fc5.x86_64.rpm e676bbe6bf683122b6da321e5ce69905d42b3474 x86_64/libgomp-4.1.1-51.fc5.x86_64.rpm a793164f3826bfc1c4c5348d0e254756c1e16a72 x86_64/gcc-gfortran-4.1.1-51.fc5.x86_64.rpm 9997ab588d28f1608767a806df040834d8dee991 x86_64/libobjc-4.1.1-51.fc5.x86_64.rpm f63281ad0406085334535098352a6381d5493692 x86_64/gcc-objc++-4.1.1-51.fc5.x86_64.rpm 3b3eb576d962a4b65704c5590f8b80d4cf635170 x86_64/libgcj-src-4.1.1-51.fc5.x86_64.rpm 0fae1e0c80c0089f09d20040e162eea0c8e70bfd x86_64/gcc-objc-4.1.1-51.fc5.x86_64.rpm 2b37092a962d9f8301b78469cc49dd184772f5a5 x86_64/libmudflap-4.1.1-51.fc5.x86_64.rpm 463a1faf2279f1014c065659b4b69216fa0db08c x86_64/gcc-java-4.1.1-51.fc5.x86_64.rpm 81ae2e6c3474a6e8db6f8e23b68b726e22f91b29 x86_64/libstdc++-devel-4.1.1-51.fc5.x86_64.rpm 7783c603e80e5a30505512810a83dc493b0a8342 x86_64/gcc-gnat-4.1.1-51.fc5.x86_64.rpm 241d128f731dea21829ce534880bfd77350c2d91 x86_64/libstdc++-4.1.1-51.fc5.x86_64.rpm 90912c14e34b3560da46bb5fc4794fec6fde8d29 x86_64/libgnat-4.1.1-51.fc5.x86_64.rpm 7de7bf0da2c096dd4754832b19a200cbf3b68fdf x86_64/debug/gcc-debuginfo-4.1.1-51.fc5.x86_64.rpm a660de3cba994d219b68e1c7390b8d5b542972f7 x86_64/libgcc-4.1.1-51.fc5.x86_64.rpm 042f093c8dce782f5f29a47125379817d9712d16 x86_64/libgcj-4.1.1-51.fc5.x86_64.rpm c9086b3b353fcf3b3f7c3e7c822bff1e087a7c6b x86_64/libgfortran-4.1.1-51.fc5.x86_64.rpm 94b4a893413f985ffaa93664f40ad4016921c148 x86_64/cpp-4.1.1-51.fc5.x86_64.rpm 31387f5c84a4d668712ada13d9ae2dc4dc438fba i386/gcc-objc-4.1.1-51.fc5.i386.rpm 60cdf87a764363939c4845f524073f5a54bffbb8 i386/debug/gcc-debuginfo-4.1.1-51.fc5.i386.rpm 5797d8397ed79e693351012639d4c0f6ce1cf069 i386/libgnat-4.1.1-51.fc5.i386.rpm d22d56083adcdf61dad4aae400c0a84e91a7c288 i386/gcc-gnat-4.1.1-51.fc5.i386.rpm 74e962eca7a474170e1c5f7fd797e1e23301c615 i386/gcc-c++-4.1.1-51.fc5.i386.rpm 9a2d1ec0fd01da8b4edb157531903ed86c489015 i386/libmudflap-4.1.1-51.fc5.i386.rpm b481106908583c94d6ccbfc91411a8e61bd86b4e i386/gcc-java-4.1.1-51.fc5.i386.rpm f86c0aff3e946c2cf34194d6326bfd10a46b7c9e i386/libstdc++-4.1.1-51.fc5.i386.rpm e421c7beb90bc01c1cc1246d64ce92240e054cad i386/libobjc-4.1.1-51.fc5.i386.rpm c8b6c865224ef139d1293b0fa7c63751ec26c90a i386/gcc-4.1.1-51.fc5.i386.rpm 2b944c777ec900787b237932bc1417e65eb1074d i386/libgfortran-4.1.1-51.fc5.i386.rpm 7d5e7040233f99e1ebc4bb2b384000497922a8eb i386/libmudflap-devel-4.1.1-51.fc5.i386.rpm 8b26fa847a3b6fc5a7c50df292955f48ff7a0c67 i386/libgcj-src-4.1.1-51.fc5.i386.rpm 0aa9573bdbd7dca9fd98a65c6276124272d52138 i386/libgcj-devel-4.1.1-51.fc5.i386.rpm 9717056dcfeae0155ed2bb3faa0edd415a4e92df i386/libstdc++-devel-4.1.1-51.fc5.i386.rpm 8932004fe02f0591125e6d569644e1506784df8a i386/libgomp-4.1.1-51.fc5.i386.rpm b79455c18aa04ab792c2ed69e9641d8bd7c3fc03 i386/gcc-gfortran-4.1.1-51.fc5.i386.rpm f5a2fc061ba8b229c411008732fbdca2667a8ebc i386/libgcj-4.1.1-51.fc5.i386.rpm 1ff6ce08a1c32634b8b246188c55fad21c706fb3 i386/gcc-objc++-4.1.1-51.fc5.i386.rpm 1022915954c4794e80df71c1b9a8e7e9191f4fa2 i386/libgcc-4.1.1-51.fc5.i386.rpm 288c0fd19a2bdf751e9dfcfce7a5ca2c1155c3e8 i386/cpp-4.1.1-51.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Wed Jan 10 15:59:49 2007 From: twaugh at redhat.com (Tim Waugh) Date: Wed, 10 Jan 2007 10:59:49 -0500 Subject: Fedora Core 6 Test Update: coreutils-5.97-12.3.fc6 Message-ID: <200701101559.l0AFxnva029964@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-040 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 6 Name : coreutils Version : 5.97 Release : 12.3.fc6 Summary : The GNU core utilities: a set of tools commonly used in shell scripts Description : These are the GNU core utilities. This package is the combination of the old GNU fileutils, sh-utils, and textutils packages. --------------------------------------------------------------------- Update Information: Bug fix update to prevent a cut(1) crash. --------------------------------------------------------------------- * Wed Jan 10 2007 Tim Waugh 5.97-12.3 - Prevent a cut(1) crash (bug #220312). * Fri Nov 24 2006 Tim Waugh 5.97-12.2 - Unbreak id (bug #217177). * Thu Nov 23 2006 Tim Waugh 5.97-12.1 - Fixed stat's 'C' format specifier (bug #216676). - Misleading 'id -Z root' error message (bug #211089). * Wed Oct 4 2006 Tim Waugh 5.97-12 - Fixed 'cp -Z' when destination exists, again (bug #189967). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 1ca789ebe4c7e7a42d67aa605fcb0f68b209a3fb SRPMS/coreutils-5.97-12.3.fc6.src.rpm 1ca789ebe4c7e7a42d67aa605fcb0f68b209a3fb noarch/coreutils-5.97-12.3.fc6.src.rpm 8c639b66d81c94d41a70a4af62c93ee90f76db4d ppc/coreutils-5.97-12.3.fc6.ppc.rpm ed3beb1df1abf1e9d16591d915e52d2cb31cdd39 ppc/debug/coreutils-debuginfo-5.97-12.3.fc6.ppc.rpm fc6dd8ac6e5db31e8db76cea8cf7d2a3477a6a80 x86_64/coreutils-5.97-12.3.fc6.x86_64.rpm a6bed49ce02e498d02b74e78d74bc7fe53bb5d34 x86_64/debug/coreutils-debuginfo-5.97-12.3.fc6.x86_64.rpm 81a2d8c1b83b16063f596a2755f99c00a8524c90 i386/coreutils-5.97-12.3.fc6.i386.rpm d5766e5363a0f3bfcd272edcc23865ce40646e8c i386/debug/coreutils-debuginfo-5.97-12.3.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mitr at redhat.com Wed Jan 10 16:04:29 2007 From: mitr at redhat.com (Miloslav Trmac) Date: Wed, 10 Jan 2007 11:04:29 -0500 Subject: [SECURITY] Fedora Core 5 Test Update: fetchmail-6.3.6-1.fc5 Message-ID: <200701101604.l0AG4T7R031868@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-041 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 5 Name : fetchmail Version : 6.3.6 Release : 1.fc5 Summary : A remote mail retrieval and forwarding utility Description : Fetchmail is a remote mail retrieval and forwarding utility intended for use over on-demand TCP/IP links, like SLIP or PPP connections. Fetchmail supports every remote-mail protocol currently in use on the Internet (POP2, POP3, RPOP, APOP, KPOP, all IMAPs, ESMTP ETRN, IPv6, and IPSEC) for retrieval. Then Fetchmail forwards the mail through SMTP so you can read it through your favorite mail client. Install fetchmail if you need to retrieve mail over SLIP or PPP connections. --------------------------------------------------------------------- Update Information: If no regressions are reported, this will be pushed to final around Jan 12. --------------------------------------------------------------------- * Sat Jan 6 2007 Miloslav Trmac - 6.3.6-1 - Update to fetchmail-6.3.6 (CVE-2006-5867, CVE-2006-5974) * Wed Nov 1 2006 Miloslav Trmac - 6.3.5-1 - Update to fetchmail-6.3.5 - Fix some rpmlint warnings * Sun Sep 24 2006 Miloslav Trmac - 6.3.4-2 - Don't increase the certificate search path on each poll (#206346) * Wed Jul 12 2006 Jesse Keating - 6.3.4-1.1 - rebuild --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ 61625e187f09c03e22f493f29165b7cd734ea550 SRPMS/fetchmail-6.3.6-1.fc5.src.rpm 61625e187f09c03e22f493f29165b7cd734ea550 noarch/fetchmail-6.3.6-1.fc5.src.rpm 93d7534fba6a49053a296e91b34bf35453b492ae ppc/fetchmail-6.3.6-1.fc5.ppc.rpm f60a3f5c70bea85ac43803e8dcdd7a8d996d11fb ppc/debug/fetchmail-debuginfo-6.3.6-1.fc5.ppc.rpm 5ba3d820efdcd538fdf7a41c9e726bdd808d74ed x86_64/debug/fetchmail-debuginfo-6.3.6-1.fc5.x86_64.rpm 665255df9a224850b775ebd84ad50e40039de2a3 x86_64/fetchmail-6.3.6-1.fc5.x86_64.rpm 855eb82c9a2e07c468f88a9c2e51cb103c728d4c i386/debug/fetchmail-debuginfo-6.3.6-1.fc5.i386.rpm 756d03a555d83397814dcb55d90678eff6e760ed i386/fetchmail-6.3.6-1.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mitr at redhat.com Wed Jan 10 16:04:59 2007 From: mitr at redhat.com (Miloslav Trmac) Date: Wed, 10 Jan 2007 11:04:59 -0500 Subject: [SECURITY] Fedora Core 6 Test Update: fetchmail-6.3.6-1.fc6 Message-ID: <200701101604.l0AG4xxp032042@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-042 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 6 Name : fetchmail Version : 6.3.6 Release : 1.fc6 Summary : A remote mail retrieval and forwarding utility Description : Fetchmail is a remote mail retrieval and forwarding utility intended for use over on-demand TCP/IP links, like SLIP or PPP connections. Fetchmail supports every remote-mail protocol currently in use on the Internet (POP2, POP3, RPOP, APOP, KPOP, all IMAPs, ESMTP ETRN, IPv6, and IPSEC) for retrieval. Then Fetchmail forwards the mail through SMTP so you can read it through your favorite mail client. Install fetchmail if you need to retrieve mail over SLIP or PPP connections. --------------------------------------------------------------------- Update Information: If no regressions are reported, this will be pushed to final around Jan 12. --------------------------------------------------------------------- * Sat Jan 6 2007 Miloslav Trmac - 6.3.6-1 - Update to fetchmail-6.3.6 (CVE-2006-5867, CVE-2006-5974) * Wed Nov 1 2006 Miloslav Trmac - 6.3.5-1 - Update to fetchmail-6.3.5 - Fix some rpmlint warnings * Sun Sep 24 2006 Miloslav Trmac - 6.3.4-2 - Don't increase the certificate search path on each poll (#206346) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 5c6188d8fdff759f6f5bb2bd642be4dcf197e272 SRPMS/fetchmail-6.3.6-1.fc6.src.rpm 5c6188d8fdff759f6f5bb2bd642be4dcf197e272 noarch/fetchmail-6.3.6-1.fc6.src.rpm 04aa3e675ac42a2203826c41a4e21e91e74174d6 ppc/fetchmail-6.3.6-1.fc6.ppc.rpm b872736d9a9fd9f0b92f08313852989e8a953fd3 ppc/debug/fetchmail-debuginfo-6.3.6-1.fc6.ppc.rpm 13dac824596a24ab2fb606e981cfc64cb5ff9c20 x86_64/debug/fetchmail-debuginfo-6.3.6-1.fc6.x86_64.rpm 5f006a579c9441351c53c155918550c5fec4e8d9 x86_64/fetchmail-6.3.6-1.fc6.x86_64.rpm d32e960b81537677f02a7b9f0cb6b08d23684c9e i386/debug/fetchmail-debuginfo-6.3.6-1.fc6.i386.rpm 0c0c8f80c6ec3a394ff962a491fff082f0bab129 i386/fetchmail-6.3.6-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mbarnes at redhat.com Wed Jan 10 20:22:21 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Wed, 10 Jan 2007 15:22:21 -0500 Subject: Fedora Core 6 Test Update: evolution-data-server-1.8.2-2.fc6 Message-ID: <200701102022.l0AKMLCB020957@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-044 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 6 Name : evolution-data-server Version : 1.8.2 Release : 2.fc6 Summary : Backend data server for Evolution Description : The evolution-data-server package provides a unified backend for programs that work with contacts, tasks, and calendar information. It was originally developed for Evolution (hence the name), but is now used by other packages. --------------------------------------------------------------------- Update Information: This update fixes a hang that sometimes occurs after clicking the "Send / Receive" button in Evolution. --------------------------------------------------------------------- * Wed Jan 10 2007 Matthew Barnes - 1.8.2-2.fc6 - Add patch for RH bug #208724 (hang on send/receive). * Mon Nov 20 2006 Matthew Barnes - 1.8.2-1.fc6 - Update to 1.8.2 - Remove patch for RH bug #213706 (fixed upstream). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ e9296ed2905fb41a9e885c8f0cc6b09b0ae433c3 SRPMS/evolution-data-server-1.8.2-2.fc6.src.rpm e9296ed2905fb41a9e885c8f0cc6b09b0ae433c3 noarch/evolution-data-server-1.8.2-2.fc6.src.rpm cf77cc6ec9ce0cc43b371266f5a554817a9f932c ppc/evolution-data-server-devel-1.8.2-2.fc6.ppc.rpm 84bbee62eef603b382309dc7938e1e8a6b13e0ad ppc/evolution-data-server-1.8.2-2.fc6.ppc.rpm e514f09b9c4e3d1a6b4b50befa116e7e749ff18a ppc/debug/evolution-data-server-debuginfo-1.8.2-2.fc6.ppc.rpm eb4d19a4d2d2e4b29e4bd0f2e9d8702c06cd57f4 x86_64/evolution-data-server-devel-1.8.2-2.fc6.x86_64.rpm 8af3f9637836cd224243e2d6b89fb3c12e0b320b x86_64/evolution-data-server-1.8.2-2.fc6.x86_64.rpm 59166ab25022729d544e4555007780d4bd818c7e x86_64/debug/evolution-data-server-debuginfo-1.8.2-2.fc6.x86_64.rpm dcafaf12c69e88439497346a2f089cc1549a34c9 i386/debug/evolution-data-server-debuginfo-1.8.2-2.fc6.i386.rpm 55e8cebfe425e998bd923be6c3d936b786c906ff i386/evolution-data-server-devel-1.8.2-2.fc6.i386.rpm 419b8ec812f9b7a871b55b0182721f6ba669096b i386/evolution-data-server-1.8.2-2.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From agk at redhat.com Wed Jan 10 20:24:57 2007 From: agk at redhat.com (Alasdair G. Kergon) Date: Wed, 10 Jan 2007 15:24:57 -0500 Subject: Fedora Core 5 Test Update: device-mapper-1.02.13-1.fc5 Message-ID: <200701102024.l0AKOvoZ021581@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-046 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 5 Name : device-mapper Version : 1.02.13 Release : 1.fc5 Summary : Device mapper library Description : This package contains the supporting userspace files (libdevmapper and dmsetup) for the device-mapper. --------------------------------------------------------------------- Update Information: Update to latest stable upstream release. To see what has changed, read the upstream changelog in the WHATS_NEW file under /usr/share/doc/device-mapper-1.02.13. --------------------------------------------------------------------- * Tue Jan 2 2007 Alasdair Kergon - 1.02.13-1 - Update to latest stable release. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ 9d98fcff49510f8cf0147992323195938edd61cd SRPMS/device-mapper-1.02.13-1.fc5.src.rpm 9d98fcff49510f8cf0147992323195938edd61cd noarch/device-mapper-1.02.13-1.fc5.src.rpm 51f0c0872f738c4839fd83dc3ba8942b2ca6db8a ppc/device-mapper-1.02.13-1.fc5.ppc.rpm ce8dd7c4b99522bf79c273a2247e8b5410668965 ppc/debug/device-mapper-debuginfo-1.02.13-1.fc5.ppc.rpm c6bb8cfcf80cf9de9794c83612a0f1ae6fd3b1c4 x86_64/device-mapper-1.02.13-1.fc5.x86_64.rpm aa2a3bc3d11821dc379be6364c5f53e06c800cc2 x86_64/debug/device-mapper-debuginfo-1.02.13-1.fc5.x86_64.rpm cde04e2ed1360e63c777f4ceeeebefa49fe20e24 i386/debug/device-mapper-debuginfo-1.02.13-1.fc5.i386.rpm 7734b03d355896043d81bd839a9447f4b097131f i386/device-mapper-1.02.13-1.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From agk at redhat.com Wed Jan 10 20:25:27 2007 From: agk at redhat.com (Alasdair G. Kergon) Date: Wed, 10 Jan 2007 15:25:27 -0500 Subject: Fedora Core 6 Test Update: device-mapper-1.02.13-1.fc6 Message-ID: <200701102025.l0AKPROo021792@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-047 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 6 Name : device-mapper Version : 1.02.13 Release : 1.fc6 Summary : Device mapper library Description : This package contains the supporting userspace files (libdevmapper and dmsetup) for the device-mapper. --------------------------------------------------------------------- Update Information: Update to latest stable upstream release. To see what has changed, read the upstream changelog in the WHATS_NEW file under /usr/share/doc/device-mapper-1.02.13. --------------------------------------------------------------------- * Tue Jan 2 2007 Alasdair Kergon - 1.02.13-1 - Update dmsetup man page (setgeometry & message). - Suppress encryption key in 'dmsetup table' output unless --showkeys supplied. - Smaller upstream source tarball with files for 2.4 kernel removed. - Avoid deptree attempting to suspend a device that's already suspended. - Add suspend noflush support. - Add dm_snprintf(), dm_split_words() and dm_split_lvm_name() to libdevmapper. - Add --table argument to dmsetup for a one-line table. - Abort if errors are found during cmdline option processing. - Add lockfs indicator to debug output. - Add --force to dmsetup remove* to load error target. - dmsetup remove_all also performs mknodes. - Don't suppress identical table reloads if permission changes. - Append distribution to release. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ bb32e0d2df64efbbbae8e5ce901eb3788fb5a2cc SRPMS/device-mapper-1.02.13-1.fc6.src.rpm bb32e0d2df64efbbbae8e5ce901eb3788fb5a2cc noarch/device-mapper-1.02.13-1.fc6.src.rpm d919ec3e211a003c1145701ada9e710cb81971ac ppc/device-mapper-1.02.13-1.fc6.ppc.rpm ce9b22f5db4100d9cd6fdafb7f70936dc6fbc9bc ppc/debug/device-mapper-debuginfo-1.02.13-1.fc6.ppc.rpm 9389f5a874882444475ad7447296f13448f49e6d x86_64/debug/device-mapper-debuginfo-1.02.13-1.fc6.x86_64.rpm a0f0a6934b6c69a7e212d9f8b7780a7f87124f0e x86_64/device-mapper-1.02.13-1.fc6.x86_64.rpm eedbedc6415251bf02d8c324b8a6571cc0eb501f i386/device-mapper-1.02.13-1.fc6.i386.rpm 8d573dd6465662b860fa0ba83bca46f4d07ae865 i386/debug/device-mapper-debuginfo-1.02.13-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Wed Jan 10 20:26:43 2007 From: twaugh at redhat.com (Tim Waugh) Date: Wed, 10 Jan 2007 15:26:43 -0500 Subject: Fedora Core 6 Test Update: hplip-1.6.12-1.fc6 Message-ID: <200701102026.l0AKQhrB022275@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-048 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 6 Name : hplip Version : 1.6.12 Release : 1.fc6 Summary : HP Linux Imaging and Printing Project Description : The Hewlett-Packard Linux Imaging and Printing Project provides drivers for HP printers and multi-function peripherals. --------------------------------------------------------------------- Update Information: New version. --------------------------------------------------------------------- * Wed Dec 6 2006 Tim Waugh 1.6.12-1 - 1.6.12. No longer need broken-conf, loop, out-of-paper, guest or sane-debug patches. * Wed Nov 1 2006 Tim Waugh 1.6.10-1.4 - Fixed debugging patch. * Wed Nov 1 2006 Tim Waugh 1.6.10-1.3 - Allow debugging of the SANE backend. * Mon Oct 30 2006 Tim Waugh 1.6.10-1.2 - IPv6 support (bug #198377). Local-only sockets are IPv4, and ought to be changed to unix domain sockets in future. * Fri Oct 27 2006 Tim Waugh 1.6.10-1.1 - 1.6.10. No longer need compile patch. - Fixed default config file (bug #211072). - Moved libhpip to hpijs sub-package (bug #212531). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ b3e20db56fdce2a215f26312138ba7f4ea4da87f SRPMS/hplip-1.6.12-1.fc6.src.rpm b3e20db56fdce2a215f26312138ba7f4ea4da87f noarch/hplip-1.6.12-1.fc6.src.rpm c3f70f3190c3712ed3785421e07ea0126fda99c7 ppc/libsane-hpaio-1.6.12-1.fc6.ppc.rpm 708eb3f196b59803f0531cfda29cd827c179aba3 ppc/hplip-1.6.12-1.fc6.ppc.rpm 057b16d0e157e14f9d75fc9a5f109d1bab699615 ppc/hpijs-1.6.12-1.fc6.ppc.rpm ef86a4670f0930d3c29e18ae87835c9104962bc0 ppc/debug/hplip-debuginfo-1.6.12-1.fc6.ppc.rpm 895f9db76204a1fae7eab0e2c6d6cd547f25a355 x86_64/hpijs-1.6.12-1.fc6.x86_64.rpm 725e5139cb0bd86e12851dafaf92c7e55b4f1983 x86_64/hplip-1.6.12-1.fc6.x86_64.rpm 187982bfd09e124b5eda01665de2171e81a45e1a x86_64/debug/hplip-debuginfo-1.6.12-1.fc6.x86_64.rpm 6a587ff8c3bffb3d738098fcd5b9d16f3d0ee668 x86_64/libsane-hpaio-1.6.12-1.fc6.x86_64.rpm 21febc4463b66d91de0b3bdce3a42f0e24a0a5d3 i386/hpijs-1.6.12-1.fc6.i386.rpm 1511a61307b1a5db6e8b4ff1e7f64524fab409e0 i386/debug/hplip-debuginfo-1.6.12-1.fc6.i386.rpm 8e8be663bf64100dfd51d1d5d583ffb6e2f6eae4 i386/hplip-1.6.12-1.fc6.i386.rpm 130d85bbf34c7530854d061aa371a3df6d5aaef7 i386/libsane-hpaio-1.6.12-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From agk at redhat.com Wed Jan 10 20:29:04 2007 From: agk at redhat.com (Alasdair G. Kergon) Date: Wed, 10 Jan 2007 15:29:04 -0500 Subject: Fedora Core 6 Test Update: lvm2-2.02.17-1.fc6 Message-ID: <200701102029.l0AKT4xC022826@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-049 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 6 Name : lvm2 Version : 2.02.17 Release : 1.fc6 Summary : Userland logical volume management tools Description : LVM2 includes all of the support for handling read/write operations on physical volumes (hard disks, RAID-Systems, magneto optical, etc., multiple devices (MD), see mdadd(8) or even loop devices, see losetup(8)), creating volume groups (kind of virtual disks) from one or more physical volumes and creating one or more logical volumes (kind of logical partitions) in volume groups. --------------------------------------------------------------------- Update Information: Update to latest stable upstream release. To see what has changed, read the upstream changelog in the WHATS_NEW file under /usr/share/doc/lvm2-2.02.17 --------------------------------------------------------------------- * Tue Jan 2 2007 Alasdair Kergon - 2.02.17-1 - Latest stable upstream version. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 5a15724ef1890996917883dcb097bd96109a9cb5 SRPMS/lvm2-2.02.17-1.fc6.src.rpm 5a15724ef1890996917883dcb097bd96109a9cb5 noarch/lvm2-2.02.17-1.fc6.src.rpm 48427c6217b1df1400383f232962280eabe61f77 ppc/debug/lvm2-debuginfo-2.02.17-1.fc6.ppc.rpm b6ca40d5fdb2aa6b36187e0e5b203706bb06890d ppc/lvm2-2.02.17-1.fc6.ppc.rpm d6dd3d0ee3c1e5c69b9f4ea6b6e839c1ba5f0a82 x86_64/debug/lvm2-debuginfo-2.02.17-1.fc6.x86_64.rpm 3bb80742c21341a69fc83f18a53e543df803927d x86_64/lvm2-2.02.17-1.fc6.x86_64.rpm 2123338f5886587bae2d33bf8a3d8f5877ef28e2 i386/debug/lvm2-debuginfo-2.02.17-1.fc6.i386.rpm 10c8543b73780f489774b7c365617b86ec8691bb i386/lvm2-2.02.17-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From agk at redhat.com Wed Jan 10 20:30:16 2007 From: agk at redhat.com (Alasdair G. Kergon) Date: Wed, 10 Jan 2007 15:30:16 -0500 Subject: Fedora Core 6 Test Update: lvm2-cluster-2.02.17-1.fc6 Message-ID: <200701102030.l0AKUGCM023286@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-050 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 6 Name : lvm2-cluster Version : 2.02.17 Release : 1.fc6 Summary : Cluster extenstions for userland logical volume management tools Description : Extensions to LVM2 to support clusters. --------------------------------------------------------------------- Update Information: Update to latest stable upstream release. To see what has changed, read the upstream changelog in the WHATS_NEW file under /usr/share/doc/lvm2-2.02.17 --------------------------------------------------------------------- * Wed Jan 3 2007 Alasdair Kergon - 2.02.17-1 - Update to latest stable upstream. * Tue Sep 19 2006 Alasdair Kergon - 2.02.10-1.0 - New upstream with fixes. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ a17d7cc56462c5c9dfaede0a93d786afd646145d SRPMS/lvm2-cluster-2.02.17-1.fc6.src.rpm a17d7cc56462c5c9dfaede0a93d786afd646145d noarch/lvm2-cluster-2.02.17-1.fc6.src.rpm a9ab36158392114e3220dd3b618efc92a6821a2c ppc/lvm2-cluster-2.02.17-1.fc6.ppc.rpm 2095433b4b7f98a5e5d608d9d8049cf6ba94383f ppc/debug/lvm2-cluster-debuginfo-2.02.17-1.fc6.ppc.rpm b2c719275f58cdede667dd657daeb5a053cceaa5 x86_64/lvm2-cluster-2.02.17-1.fc6.x86_64.rpm f3405aecc296bd4ece743ef2165b2e245214d41e x86_64/debug/lvm2-cluster-debuginfo-2.02.17-1.fc6.x86_64.rpm 3785f7241e9aec01f793163f8eb54c8684b79963 i386/lvm2-cluster-2.02.17-1.fc6.i386.rpm eeea8f8a3dc20dc83a7ed3c19fb2a14d1c33e104 i386/debug/lvm2-cluster-debuginfo-2.02.17-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From agk at redhat.com Wed Jan 10 20:31:22 2007 From: agk at redhat.com (Alasdair G. Kergon) Date: Wed, 10 Jan 2007 15:31:22 -0500 Subject: Fedora Core 5 Test Update: lvm2-2.02.17-1.fc5 Message-ID: <200701102031.l0AKVMPl023925@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-051 2007-01-10 --------------------------------------------------------------------- Product : Fedora Core 5 Name : lvm2 Version : 2.02.17 Release : 1.fc5 Summary : Userland logical volume management tools Description : LVM2 includes all of the support for handling read/write operations on physical volumes (hard disks, RAID-Systems, magneto optical, etc., multiple devices (MD), see mdadd(8) or even loop devices, see losetup(8)), creating volume groups (kind of virtual disks) from one or more physical volumes and creating one or more logical volumes (kind of logical partitions) in volume groups. --------------------------------------------------------------------- Update Information: Update to latest stable upstream release. To see what has changed, read the upstream changelog in the WHATS_NEW file under /usr/share/doc/lvm2-2.02.17 --------------------------------------------------------------------- * Tue Jan 2 2007 Alasdair Kergon - 2.02.17-1 - Latest stable upstream version. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ 8b47c844242e54e7e3897b840542f54d9c314405 SRPMS/lvm2-2.02.17-1.fc5.src.rpm 8b47c844242e54e7e3897b840542f54d9c314405 noarch/lvm2-2.02.17-1.fc5.src.rpm 78a4a05556f1c5ad018ac61c1112b7b8be1b46ba ppc/lvm2-2.02.17-1.fc5.ppc.rpm 9447422caae08ae71aae46e4711d1019b50e3e90 ppc/debug/lvm2-debuginfo-2.02.17-1.fc5.ppc.rpm ef2accf373302423871262a02474a87507d4369d x86_64/debug/lvm2-debuginfo-2.02.17-1.fc5.x86_64.rpm 03680f869a4a939d84ca2deca5a9257b85b44c5c x86_64/lvm2-2.02.17-1.fc5.x86_64.rpm da2a12952421fcc5d061dbe6ee653e57ae4a9eab i386/lvm2-2.02.17-1.fc5.i386.rpm dfcac4b54d9ac53253778522379e705f74c311a5 i386/debug/lvm2-debuginfo-2.02.17-1.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From michal at harddata.com Wed Jan 10 22:09:17 2007 From: michal at harddata.com (Michal Jaegermann) Date: Wed, 10 Jan 2007 15:09:17 -0700 Subject: rawhide report: 20070110 changes In-Reply-To: <200701101100.l0AB08Yl011093@hs20-bc2-6.build.redhat.com> References: <200701101100.l0AB08Yl011093@hs20-bc2-6.build.redhat.com> Message-ID: <20070110220917.GA21595@mail.harddata.com> On Wed, Jan 10, 2007 at 06:00:08AM -0500, buildsys at redhat.com wrote: > > Updated Packages: Wow! This is an "interesting" update! The most visible feature is that it makes my gnome-terminal to crash immediately on a startup; and bug-buddy called by that drops a core too. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=222205 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=222210 There could be more surprises as a pango update appears to remove one of shared libraries which presence seems to be widely expected. This makes for a lot of unhappy programs. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=222217 Michal From katzj at redhat.com Wed Jan 10 22:23:52 2007 From: katzj at redhat.com (Jeremy Katz) Date: Wed, 10 Jan 2007 17:23:52 -0500 Subject: rawhide report: 20070110 changes In-Reply-To: <20070110220917.GA21595@mail.harddata.com> References: <200701101100.l0AB08Yl011093@hs20-bc2-6.build.redhat.com> <20070110220917.GA21595@mail.harddata.com> Message-ID: <1168467832.4632.64.camel@aglarond.local> On Wed, 2007-01-10 at 15:09 -0700, Michal Jaegermann wrote: > On Wed, Jan 10, 2007 at 06:00:08AM -0500, buildsys at redhat.com wrote: > > Updated Packages: > > Wow! This is an "interesting" update! The most visible feature > is that it makes my gnome-terminal to crash immediately on > a startup; and bug-buddy called by that drops a core too. > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=222205 > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=222210 x86_64? Should be fixed with the vte in tomorrow's rawhide (it got fixed before I even got to looking at it :-) Jeremy From fct-cornette at insight.rr.com Thu Jan 11 02:09:20 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Wed, 10 Jan 2007 21:09:20 -0500 Subject: at-spi downgrade allows lm manager and keyboard to work. Message-ID: <45A59C50.10601@insight.rr.com> I just read through the upstream bug that my mad bug submittal craze got the bug reassigned to another bug claiming it will be fixed in the next release due to a change in at-spi. Anyway, I downgraded at-spi to the Released version for FC6 and the errors are not repeatable with the fc6 version of at-spi. This was an interesting domino effect type of bug. I guess ORBit2 is not directly responsible for the problem. When would we expect the patch applied to at-spi so we could test the effects of the improvement. Patch from upstream developer. http://bugzilla.gnome.org/attachment.cgi?id=78972 Jim -- Yes, it is written. Good shall always destroy evil. -- Sirah the Yang, "The Omega Glory", stardate unknown From deji_aking at yahoo.ca Thu Jan 11 03:39:43 2007 From: deji_aking at yahoo.ca (Deji Akingunola) Date: Wed, 10 Jan 2007 22:39:43 -0500 Subject: at-spi downgrade allows lm manager and keyboard to work. In-Reply-To: <45A59C50.10601@insight.rr.com> References: <45A59C50.10601@insight.rr.com> Message-ID: <45A5B17F.4010501@yahoo.ca> Jim Cornette wrote: > > > When would we expect the patch applied to at-spi so we could test the > effects of the improvement. > A new release of at-spi that with the fix should appear in rawhide tomorrow. (https://www.redhat.com/archives/fedora-cvs-commits/2007-January/msg00384.html) __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From gianluca.cecchi at gmail.com Thu Jan 11 05:46:36 2007 From: gianluca.cecchi at gmail.com (Gianluca Cecchi) Date: Thu, 11 Jan 2007 06:46:36 +0100 Subject: [OT] kvm kernel module in fc6? Message-ID: <561c252c0701102146i10aee336v72ae2a7d9b7583ab@mail.gmail.com> On Tue, 9 Jan 2007 23:21:32 +0000 Daniel P. Berrange wrote: > The kvm package from extras-development is a new addition and will require > the coresponding kernel from rawhide, to get the neccessary kernel mods. thanks Daniel [snip] > In FC-6, Xen HVM guests will happily use VT extensions and will be much > faster than KVM currently is, not to mention more stable (well for some > guest OS at least). Actually, taking Jeremy's src.rpm and the relative spec file I had only to: - adapt spec file for kvm-10 that was released, - change the configure line eliminating the "--with-patched-kernel" part (as said in kvm docs) - add in %files section the 3 kernel modules to be built - build the rpm - install it against my standard 2869 based fc6. And in less that one hour I was able to have a qemu/kvm wxp sp2 virtual machine running very smoothly being able to connect transparently to the internet like my physical one: - seconds to create a 9Gb disk - 5 minutes for the first part of installation/disk partition (from hd iso image) - 9 minutes for the second part with all typical parameters no customizations - 20 minutes to apply sp2 ita (from hd iso) Instead with Xen on fc6 I was only able to get a black screen after the first part with no way to proceed, after may attempts and read... I tried all the apic/acpi combinations in configuration file without success; I read xen related ml on rh but no way. Last time was about beginning of december. Based on your comments I will give another deep shot to xen to see if anything changed with latest kernels and xen packages released for fc6, that I have updated. Gianluca From buildsys at redhat.com Thu Jan 11 11:03:08 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Thu, 11 Jan 2007 06:03:08 -0500 Subject: rawhide report: 20070111 changes Message-ID: <200701111103.l0BB38nR018344@hs20-bc2-6.build.redhat.com> Updated Packages: alacarte-0.11.1.1-1.fc7 ----------------------- * Thu Jan 11 2007 Matthias Clasen - 0.11.1.1-1 - Update to 0.11.1.1 alsa-utils-1.0.14-0.2.rc1.fc7 ----------------------------- * Wed Jan 10 2007 Martin Stransky 1.0.14-0.2.rc1 - added a config line for hda-intel driver anaconda-11.2.0.9-1 ------------------- * Wed Jan 10 2007 Jeremy Katz - 11.2.0.9-1 - Set NETWORKING_IPV6 based on whether we want ipv6 for any devices or not (dcantrell, katzj, #222147) - Little fixes so installs work. at-spi-1.7.15-1.fc7 ------------------- * Wed Jan 10 2007 Matthias Clasen - 1.7.15-1 - Update to 1.7.15 atk-1.13.1-1.fc7 ---------------- * Wed Jan 10 2007 Matthias Clasen - 1.13.1-1 - Update to 1.13.1 coreutils-6.7-1.fc7 ------------------- * Tue Jan 09 2007 Tim Waugh 6.7-1 - 6.7. No longer need sort-compatibility, rename, newhashes, timestyle, acl, df-cifs, afs or autoconf patches. * Tue Jan 02 2007 Tim Waugh - Prevent 'su --help' showing runuser-only options such as --group. cpuspeed-1:1.2.1-1.52.fc7 ------------------------- dosfstools-2.11-6.1.fc7 ----------------------- elfutils-0.125-3.fc7 -------------------- * Wed Jan 10 2007 Roland McGrath - 0.125-3.fc7 - Fix overeager warn_unused_result build failures. * Wed Jan 10 2007 Roland McGrath - 0.125-1 - Update to 0.125 - elflint: Compare DT_GNU_HASH tests. - move archives into -static RPMs - libelf, elflint: better support for core file handling - Really fix libdwfl sorting of modules with 64-bit addresses (#220817). - Resolves: RHBZ #220817, RHBZ #213792 eog-2.17.4-1.fc7 ---------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.4-1 - Update to 2.17.4 * Tue Jan 09 2007 Behdad Esfahbod - 2.17.3-2 - Handle svgz images - Resolves: #219782 epic-4:2.6-1.fc7 ---------------- * Wed Jan 10 2007 Peter Vrabec 4:2.6-1 - upgrade * Mon Jul 31 2006 Peter Vrabec 4:2.4-5 - upgrade to new bugfix release * Mon Jul 31 2006 Peter Vrabec 4:2.2-5 - add buildrequires ncurses-devel epiphany-2.17.5-1.fc7 --------------------- * Thu Jan 11 2007 Matthias Clasen 2.17.5-1 - Update to 2.17.5 evince-0.7.1-1.fc7 ------------------ * Wed Jan 10 2007 Matthias Clasen - 0.7.1-1 - Update to 0.7.1 evolution-2.9.5-2.fc7 --------------------- * Wed Jan 10 2007 Matthew Barnes - 2.9.5-2.fc7 - Add patch for GNOME bug #359979 (change EMsgPort semantics). * Mon Jan 08 2007 Matthew Barnes - 2.9.5-1.fc7 - Update to 2.9.5 - Remove pilot-link-0.12 patch (fixed upstream). - Remove patch for RH bug #215466 and #218589 (fixed upstream). - Remove patch for RH bug #215695 (fixed upstream). * Sat Dec 30 2006 Matthew Barnes - 2.9.4-4.fc7 - Add Requires evolution-data-server-devel to devel subpackage (RH bug #218889). evolution-data-server-1.9.5-3.fc7 --------------------------------- * Wed Jan 10 2007 Matthew Barnes - 1.9.5-3.fc7 - Add patch for GNOME bug #359979 (change EMsgPort semantics). file-roller-2.17.5-1.fc7 ------------------------ * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 gail-1.10.0-1.fc7 ----------------- gawk-3.1.5-12.fc7 ----------------- * Thu Jan 11 2007 Karel Zak 3.1.5-12 - fix #222080 double free or corruption * Wed Jul 19 2006 Karel Zak 3.1.5-11 - spec file cleanup * Tue Jul 18 2006 Karel Zak 3.1.5-10 - add IPv6 support (patch be Jan Pazdziora) gcalctool-5.9.10-1.fc7 ---------------------- * Wed Jan 10 2007 Matthias Clasen - 5.9.10-1 - Update to 5.9.10 gdm-1:2.17.5-1.fc7 ------------------ * Thu Jan 11 2007 Matthias Clasen - 1:2.17.5-1 - Update to 2.17.5 gedit-1:2.17.3-1.fc7 -------------------- * Wed Jan 10 2007 Matthias Clasen - 1:2.17.3-1 - Update to 2.17.3 gettext-0.16.1-2.fc7 -------------------- * Thu Jan 11 2007 Jens Petersen - 0.16.1-2 - move /usr/lib/gettext to devel subpackage gimp-print-4.2.7-24.fc7 ----------------------- * Wed Jan 10 2007 Tim Waugh 4.2.7-24 - Don't build the plugin subpackage (bug #196989). gnome-applets-1:2.17.1-1.fc7 ---------------------------- * Wed Jan 10 2007 Matthias Clasen - 1:2.17.1-1 - Update to 2.17.1 * Wed Jan 10 2007 Ray Strode - 1:2.16.2-6 - fix null applet error on login for new users (bug 222104) gnome-desktop-2.17.5-1.fc7 -------------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 gnome-games-1:2.17.5-1.fc7 -------------------------- * Wed Jan 10 2007 Matthias Clasen - 1:2.17.5-1 - Update to 2.17.5 gnome-icon-theme-2.17.5-1.fc7 ----------------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 gnome-keyring-0.7.3-1.fc7 ------------------------- * Wed Jan 10 2007 Matthias Clasen - 0.7.3-1 - Update to 0.7.3 * Tue Dec 19 2006 Matthias Clasen - 0.7.2-1 - Update to 0.7.2 * Mon Nov 06 2006 Matthias Clasen - 0.7.1-1 - Update to 0.7.1 gnome-mag-0.14.1-1.fc7 ---------------------- * Wed Jan 10 2007 Matthias Clasen - 0.14.1-1 - Update to 0.14.1 gnome-media-2.17.2-1.fc7 ------------------------ * Wed Jan 10 2007 Matthias Clasen - 2.17.2-1 - Update to 2.17.2 gnome-menus-2.17.5-1.fc7 ------------------------ * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 - Remove traces of gmenu-simple-editor gnome-screensaver-2.17.5-1.fc7 ------------------------------ * Thu Jan 11 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 gnome-system-monitor-2.17.5-1.fc7 --------------------------------- * Thu Jan 11 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 gnome-themes-2.17.5-1.fc7 ------------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 gnome-utils-1:2.17.1-1.fc7 -------------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.1-1 - Update to 2.17.1 gthumb-2.9.1-1.fc7 ------------------ * Wed Jan 10 2007 Matthias Clasen - 2.9.1-1 - Update to 2.9.1 gtk2-engines-2.9.1-1.fc7 ------------------------ * Wed Jan 10 2007 Matthias Clasen - 2.9.1-1 - Update to 2.9.1 gtksourceview-1.8.3-1.fc7 ------------------------- * Wed Jan 10 2007 Matthias Clasen - 1.8.3-1 - Update to 1.8.3 hplip-1.6.12-1.fc7 ------------------ * Wed Jan 10 2007 Tim Waugh 1.6.12-1 - 1.6.12. No longer need broken-conf, loop, out-of-paper or sane-debug patches. intltool-0.35.4-1.fc7 --------------------- * Wed Jan 10 2007 Matthias Clasen - 0.35.4-1 - Update to 0.35.4 iptables-1.3.7-1.1 ------------------ * Wed Jan 10 2007 Thomas Woerner 1.3.7-1.1 - fixed installation of secmark modules kernel-2.6.19-1.2909.fc7 ------------------------ * Wed Jan 10 2007 Dave Jones - 2.6.20rc4-git4 - PIIX3 PATA support. libbonoboui-2.17.0-1.fc7 ------------------------ * Wed Jan 10 2007 Matthias Clasen - 2.17.0-1 - Update to 2.17.0 libgnome-2.17.3-1.fc7 --------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.3-1 - Update to 2.17.3 * Wed Jan 10 2007 Matthias Clasen - 2.17.2-1 - Update to 2.17.2 * Tue Dec 05 2006 Matthias Clasen - 2.17.1-1 - Update to 2.17.1 libgnomeui-2.17.1-1.fc7 ----------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.1-1 - Update to 2.17.1 logrotate-3.7.4-10.fc7 ---------------------- * Wed Jan 10 2007 Peter Vrabec 3.7.4-10 - fix some rpmlint issues m17n-db-1.3.4-2.fc7 ------------------- * Thu Jan 11 2007 Mayank Jain - Moved all translations to m17n-db-datafiles package m17n-lib-1.3.4-1.1.fc7 ---------------------- * Wed Jan 10 2007 Mayank Jain - 1.3.4-1.1.fc7 - rebuild for m17n-lib-1.3.4 version - Updated m17n-lib-nobuild-examples.patch * Wed Jul 12 2006 Jesse Keating - 1.3.3-1.1.fc6 - rebuild * Wed Jul 12 2006 Mayank Jain - 1.3.3-1.fc6 - Updated spec file for changes mentioned in RH bug 193524, comment 4 - Thanks to Mamoru Tasaka nautilus-cd-burner-2.17.5-1.fc7 ------------------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 ncompress-4.2.4-48.fc7 ---------------------- * Wed Jan 10 2007 Peter Vrabec 4.2.4-48 - fix some rpmlint issues ncurses-5.6-1.20070106.fc7 -------------------------- * Wed Jan 10 2007 Miroslav Lichvar 5.6-1.20070106 - update to 5.6, patch 20070106 orca-2.17.5-1.fc7 ----------------- * Thu Jan 11 2007 Matthias Clasen - 2.17.5-1 - Update to orca 2.17.5 postgresql-8.2.1-1.fc7 ---------------------- * Wed Jan 10 2007 Tom Lane 8.2.1-1 - Update to PostgreSQL 8.2.1 - Update to pgtcl 1.5.3 - Be sure we link to libncurses, not libtermcap which is disappearing in Fedora pyparted-1.8.2-1.fc7 -------------------- * Wed Jan 10 2007 Jeremy Katz - 1.8.2-1 - use PyObject_DEL instead of PyMem_DEL rhpl-0.199-1 ------------ * Wed Jan 10 2007 Paul Nasrat - 0.199-1 - Fix Korean keyboard map (#212280) system-config-samba-1.2.38-1.fc7 -------------------------------- * Wed Jan 10 2007 Nils Philippsen - 1.2.38 - get list of configuration parameters and defaults from testparm, fix duplicate dict keys (#219308) vconfig-1.9-3.fc7 ----------------- * Wed Jan 10 2007 Phil Knirsch - 1.9-3 - Removed CVS cruft from documentation (#221161) - Tiny specfile cleanups. vino-2.17.5-1.fc7 ----------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 vte-0.15.1-2.fc7 ---------------- * Wed Jan 10 2007 Behdad Esfahbod 0.15.1-2 - Add vte-0.15.1-segfault.patch - Fixes crasher on x86_64 (GNOME#394890) wget-1.10.2-11.fc7 ------------------ * Wed Jan 10 2007 Karsten Hopp 1.10.2-11 - add fix for CVE-2006-6719 zenity-2.17.3-1.fc7 ------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.3-1 - Update to 2.17.3 Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From drago01 at gmail.com Thu Jan 11 11:21:39 2007 From: drago01 at gmail.com (dragoran) Date: Thu, 11 Jan 2007 12:21:39 +0100 Subject: rawhide report: 20070111 changes In-Reply-To: <200701111103.l0BB38nR018344@hs20-bc2-6.build.redhat.com> References: <200701111103.l0BB38nR018344@hs20-bc2-6.build.redhat.com> Message-ID: <45A61DC3.3040409@gmail.com> buildsys at redhat.com wrote: > > > > Updated Packages: > > [...] > anaconda-11.2.0.9-1 > ------------------- > * Wed Jan 10 2007 Jeremy Katz - 11.2.0.9-1 > - Set NETWORKING_IPV6 based on whether we want ipv6 for > any devices or not (dcantrell, katzj, #222147) > - Little fixes so installs work. > does this anaconda supports sw raid? it was broken/diabled some time ago so I was unable to use it on my box? is this fixed now? if not, will it get fixed before T1? > > > > > > > > > > > > > > > > > > > > > From fct-cornette at insight.rr.com Thu Jan 11 11:49:50 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Thu, 11 Jan 2007 06:49:50 -0500 Subject: at-spi downgrade allows lm manager and keyboard to work. In-Reply-To: <45A5B17F.4010501@yahoo.ca> References: <45A59C50.10601@insight.rr.com> <45A5B17F.4010501@yahoo.ca> Message-ID: <45A6245E.2000109@insight.rr.com> Deji Akingunola wrote: > Jim Cornette wrote: >> >> >> When would we expect the patch applied to at-spi so we could test the >> effects of the improvement. >> > A new release of at-spi that with the fix should appear in rawhide > tomorrow. > (https://www.redhat.com/archives/fedora-cvs-commits/2007-January/msg00384.html) > > Thanks! I bookmarked the archive main page. The package did not make it yet to rawhide but am looking forward to testing once it arrives. All sorts of bug reports could then be closed. Jim -- That money talks, I'll not deny, I heard it once, It said "Good-bye. -- Richard Armour From vonbrand at inf.utfsm.cl Thu Jan 11 13:44:32 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Thu, 11 Jan 2007 10:44:32 -0300 Subject: rawhide report: 20070111 changes In-Reply-To: Message from buildsys@redhat.com of "Thu, 11 Jan 2007 06:03:08 CDT." <200701111103.l0BB38nR018344@hs20-bc2-6.build.redhat.com> Message-ID: <200701111344.l0BDiWpk012203@laptop13.inf.utfsm.cl> buildsys at redhat.com wrote: > Updated Packages: [...] > gnome-desktop-2.17.5-1.fc7 > -------------------------- > * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 > - Update to 2.17.5 Gives (i686): Updating : gnome-desktop-devel ##################### [ 58/160] I/O warning : failed to load external entity "glchess.schemas" Failed to open `glchess.schemas': No such file or directory locate(1) doesn't find any file of that name here. [...] > gnome-menus-2.17.5-1.fc7 > ------------------------ > * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 > - Update to 2.17.5 > - Remove traces of gmenu-simple-editor Clashes with redhat-menus: Transaction Check Error: file /usr/share/desktop-directories/System.directory from install of gnome-menus-2.17.5-1.fc7 conflicts with file from package redhat-menus-7.8.9-1.fc7 -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From rstrode at redhat.com Thu Jan 11 15:52:05 2007 From: rstrode at redhat.com (Raymond Strode) Date: Thu, 11 Jan 2007 10:52:05 -0500 Subject: Fedora Core 6 Test Update: gnome-applets-2.16.0.1-13.fc6 Message-ID: <200701111552.l0BFq5NL004313@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-052 2007-01-11 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-applets Version : 2.16.0.1 Release : 13.fc6 Summary : Small applications for the GNOME panel Description : GNOME (GNU Network Object Model Environment) is a user-friendly set of applications and desktop tools to be used in conjunction with a window manager for the X Window System. The gnome-applets package provides small utilities for the GNOME panel. --------------------------------------------------------------------- Update Information: This update should resolve an issure where some users are getting an error dialog on login about the Null-Applet. --------------------------------------------------------------------- * Wed Jan 10 2007 Ray Strode - 1:2.16.0.1-13 - fix null applet error on login for new users (bug 222104) * Tue Dec 12 2006 Ray Strode - 1:2.16.0.1-12 - fix mixer applet error on login for new users (bug 217919) * Mon Nov 6 2006 Ray Strode - 1:2.16.0.1-11 - s/verion/version/ in dbus-glib-devel build requires --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 4d8657f99a2e986a59199cf8794d4a618ccbd608 SRPMS/gnome-applets-2.16.0.1-13.fc6.src.rpm 4d8657f99a2e986a59199cf8794d4a618ccbd608 noarch/gnome-applets-2.16.0.1-13.fc6.src.rpm a2da0dbb395eb0dcbf47677771c2cb706b8f81c4 ppc/gnome-applets-2.16.0.1-13.fc6.ppc.rpm 3bafba479cb11292fdbdebfba01ca798e15101e3 ppc/debug/gnome-applets-debuginfo-2.16.0.1-13.fc6.ppc.rpm baf160b6bc2bfd55e343bad35fec4af112d59d96 x86_64/debug/gnome-applets-debuginfo-2.16.0.1-13.fc6.x86_64.rpm 84156ea77c714946df81bca1ab1d10d3aa7a849c x86_64/gnome-applets-2.16.0.1-13.fc6.x86_64.rpm 25ad31b85e32481c9f268311ddd0cbaaa8751f01 i386/gnome-applets-2.16.0.1-13.fc6.i386.rpm 9d0e21355826d6481db3920b8fb257744e18e93f i386/debug/gnome-applets-debuginfo-2.16.0.1-13.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Thu Jan 11 15:56:09 2007 From: twaugh at redhat.com (Tim Waugh) Date: Thu, 11 Jan 2007 10:56:09 -0500 Subject: Fedora Core 6 Test Update: diffstat-1.43-1.fc6 Message-ID: <200701111556.l0BFu9p0005669@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-057 2007-01-11 --------------------------------------------------------------------- Product : Fedora Core 6 Name : diffstat Version : 1.43 Release : 1.fc6 Summary : A utility which provides statistics based on the output of diff. Description : The diff command compares files line by line. Diffstat reads the output of the diff command and displays a histogram of the insertions, deletions and modifications in each file. Diffstat is commonly used to provide a summary of the changes in large, complex patch files. Install diffstat if you need a program which provides a summary of the diff command's output. You'll need to also install diffutils. --------------------------------------------------------------------- Update Information: New version that fixes a crash. --------------------------------------------------------------------- * Thu Jan 11 2007 Tim Waugh 1.43-1 - 1.43. Fixes bug #187350. No longer need compress patch. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 4d7bad0496e8ab5185953c0ab1939b51638fcd36 SRPMS/diffstat-1.43-1.fc6.src.rpm 4d7bad0496e8ab5185953c0ab1939b51638fcd36 noarch/diffstat-1.43-1.fc6.src.rpm 65edd541c5f537ef566598b8d0026c6e9e3da9ba ppc/diffstat-1.43-1.fc6.ppc.rpm fe646c9a56197e71991890faaa523a04f5b70cca ppc/debug/diffstat-debuginfo-1.43-1.fc6.ppc.rpm df515d7253c56555637322dfcc170392c9aeb490 x86_64/diffstat-1.43-1.fc6.x86_64.rpm 2f3585498ac955b81b5f7e11aab3384522050f01 x86_64/debug/diffstat-debuginfo-1.43-1.fc6.x86_64.rpm 4765b4e5ac811a57b6899176184f271878a174df i386/debug/diffstat-debuginfo-1.43-1.fc6.i386.rpm 76f8b41da8f8bec2a135fef1c37f3757d4878b3c i386/diffstat-1.43-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From sebenste at weather.admin.niu.edu Thu Jan 11 19:18:34 2007 From: sebenste at weather.admin.niu.edu (Gilbert Sebenste) Date: Thu, 11 Jan 2007 13:18:34 -0600 (CST) Subject: Updated kernels for FC5/FC6 question Message-ID: Hello Dave et al, How's things going for a release? I take it the previous problems are still giving you folks many fits. ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** ******************************************************************************* From wwoods at redhat.com Thu Jan 11 20:21:31 2007 From: wwoods at redhat.com (Will Woods) Date: Thu, 11 Jan 2007 20:21:31 +0000 Subject: Fedora QA meeting: Wed Jan. 17, 1700UTC Message-ID: <1168546891.25699.42.camel@metroid.rdu.redhat.com> Hello! Hope you all enjoyed your winter break from the test meetings. With the new year comes some new changes: 1) Meetings (and bug triage and other general QA/tester discussion) have been moved to #fedora-qa. We'll still be on freenode, naturally. 2) We'll be moving to a new mailing list: fedora-qa (when it's set up). Some other exciting news: I'll be at FUDCon[1], running a QA Hackfest! I'm planning to be writing (and helping others write) a whole mess of RHTS[2] regression tests, and testing the heck out of F7Test1 (which should be released Jan. 30, 3 days before FUDCon). I'm open to suggestions for other things to work on, too. With Test1 coming so soon, it's time we had a discussion about how we're going to test this thing! Meeting agenda will be posted here: http://fedoraproject.org/wiki/QA/Meetings/20070117 Here's a couple things I want to talk about: 1. F7 - what are the new features? How will we test them? - See the matrix here: http://fedoraproject.org/wiki/QA/7/FeatureMatrix - How are we going to track who tested what? Does everyone have wiki access? - Do these things have good test plans? Who can write test plans? 2. fedora-updates-system and web interfaces for testing feedback - We need a web interface to keep track of who's tested what, and to make it easier to report bugs with test packages. If you've got any suggestions, send them to me or the list. Hope to see you there! -w [1] http://barcamp.org/FudconBoston2007 [2] https://wiki.108.redhat.com/wiki/index.php/Testing/Rhts [3] See schedule here: http://fedoraproject.org/wiki/Releases/7 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From davej at redhat.com Thu Jan 11 21:51:03 2007 From: davej at redhat.com (Dave Jones) Date: Thu, 11 Jan 2007 16:51:03 -0500 Subject: [SECURITY] Fedora Core 6 Test Update: kernel-2.6.19-1.2895.fc6 Message-ID: <200701112151.l0BLp3gS018621@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-058 2007-01-11 --------------------------------------------------------------------- Product : Fedora Core 6 Name : kernel Version : 2.6.19 Release : 1.2895.fc6 Summary : The Linux kernel (the core of the Linux operating system) Description : The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. --------------------------------------------------------------------- Update Information: This is a large rebase to the latest upstream stable kernel (2.6.19.2) Complete changelogs available at www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.19 www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.19.1 www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.19.2 This update also introduces 'kernel-debug', a variant with additional debugging options enabled. These kernels may run with lower performance and increased memory overhead than the non-debug variants. --------------------------------------------------------------------- * Wed Jan 10 2007 Dave Jones - 2.6.19.2 * Tue Jan 9 2007 Dave Jones - GFS2 update. * Mon Jan 8 2007 Dave Jones - Enable pktcdvd for 586. (#221673) - Reenable signed modules. - networking labelling lockdep fixes. * Sun Jan 7 2007 Dave Jones - Disable NMI watchdog by default. * Sat Jan 6 2007 Dave Jones - 2.6.19.2rc1 * Tue Jan 2 2007 Dave Jones - Make serial ATA work again. * Thu Dec 28 2006 Dave Jones - Enable debug kernels. * Sun Dec 24 2006 Juan Quintela - 2.6.19.1 xen update. * Thu Dec 21 2006 Dave Jones - 2.6.19.1 * Wed Dec 20 2006 Dave Jones - Update to 2.6.18.6 final (no changes since rc2) - Reenable squashfs (#220293) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 11e01bb5bb7e86b4711f6d8bcc4e8213933e1813 SRPMS/kernel-2.6.19-1.2895.fc6.src.rpm 11e01bb5bb7e86b4711f6d8bcc4e8213933e1813 noarch/kernel-2.6.19-1.2895.fc6.src.rpm f019dc8d84e49aca500d91937d1b996cd9e6e3bc ppc/kernel-2.6.19-1.2895.fc6.ppc.rpm a028edcf0e78fbdbd9892bc4ee686e546601ae8f ppc/kernel-headers-2.6.19-1.2895.fc6.ppc.rpm 046fe63d13c735d082ed693a0a6288c6239e28db ppc/debug/kernel-smp-debuginfo-2.6.19-1.2895.fc6.ppc.rpm db390a5d9150fbb1f1757dcd2890e8d10bf68172 ppc/kernel-devel-2.6.19-1.2895.fc6.ppc.rpm fbd8232d1d4992402f2f371b1a1ed66244975e26 ppc/kernel-smp-2.6.19-1.2895.fc6.ppc.rpm ebbe999012a0c40bb6cca1bb9edecfcddb1390c6 ppc/debug/kernel-debuginfo-2.6.19-1.2895.fc6.ppc.rpm 379a0f350af3e51834f19bb74af12d484bfb9e08 ppc/debug/kernel-debuginfo-common-2.6.19-1.2895.fc6.ppc.rpm 684247d4f410909ce9ee5b2da2c7a5149e7e2c15 ppc/kernel-smp-devel-2.6.19-1.2895.fc6.ppc.rpm 634d6f164e424fc90b785f8348d8ccebcd2cf67f ppc/kernel-doc-2.6.19-1.2895.fc6.noarch.rpm e454f6b84378020a8db74902054035b427b88cc9 x86_64/debug/kernel-debuginfo-common-2.6.19-1.2895.fc6.x86_64.rpm 6a7ceed107b667137f19dbf8e85f05b945753517 x86_64/debug/kernel-debug-debuginfo-2.6.19-1.2895.fc6.x86_64.rpm cc64ca7fd8c81adbfbf9ab6f92f61aa3d8e3ac93 x86_64/kernel-2.6.19-1.2895.fc6.x86_64.rpm 9223c97d8e6d4e2133d86874341abd383e5c1d70 x86_64/kernel-kdump-devel-2.6.19-1.2895.fc6.x86_64.rpm 7632022aab90e1ec7db97bff5ab1a13da3581cc5 x86_64/debug/kernel-xen-debuginfo-2.6.19-1.2895.fc6.x86_64.rpm 501eeb3b707bf842d83d28f93c477f1f70510223 x86_64/kernel-debug-devel-2.6.19-1.2895.fc6.x86_64.rpm 64f04eb00a5250bcde267ba91f9edc710ed79498 x86_64/kernel-devel-2.6.19-1.2895.fc6.x86_64.rpm 5ec5abe14b776da09c5ef33a0b39134950b23799 x86_64/kernel-xen-2.6.19-1.2895.fc6.x86_64.rpm a2f3f93a82c6f170aa63a7c43d22c1fdb41300b1 x86_64/debug/kernel-kdump-debuginfo-2.6.19-1.2895.fc6.x86_64.rpm f6c46ae7c14228abe6cafdcbb0cd8aff4e46a9e6 x86_64/kernel-kdump-2.6.19-1.2895.fc6.x86_64.rpm 50e682f47a688cac252f02ff588f4d0504a7a36a x86_64/kernel-debug-2.6.19-1.2895.fc6.x86_64.rpm 3a9dcaafe53b53e363f7731f0868fba096e79952 x86_64/kernel-headers-2.6.19-1.2895.fc6.x86_64.rpm 29b0f4b4bd545e1fef4a3cac55f9fc9a84acf188 x86_64/debug/kernel-debuginfo-2.6.19-1.2895.fc6.x86_64.rpm 065a24c6fe2d9f36d9e98b673ff347fbd1ff440b x86_64/kernel-xen-devel-2.6.19-1.2895.fc6.x86_64.rpm 634d6f164e424fc90b785f8348d8ccebcd2cf67f x86_64/kernel-doc-2.6.19-1.2895.fc6.noarch.rpm 87f8e13d9d69c8df99ed827b434db810cd4e78e4 i386/kernel-headers-2.6.19-1.2895.fc6.i386.rpm 28edb9368cfa7afbf8c2ad692b8f1b69dee579eb i386/kernel-devel-2.6.19-1.2895.fc6.i586.rpm 8420e7472653398dccdcdd3fdf679cf32a6f9d89 i386/kernel-2.6.19-1.2895.fc6.i586.rpm bc65287725cc90cb32b82ad20161728af4d4f8ee i386/debug/kernel-debuginfo-2.6.19-1.2895.fc6.i586.rpm 11b844a090325f413b943f7a432f3a1f51a26551 i386/debug/kernel-debuginfo-common-2.6.19-1.2895.fc6.i586.rpm 4df5b67f836236b0a6c2214ba992c6267383fc7d i386/debug/kernel-debuginfo-2.6.19-1.2895.fc6.i686.rpm 02ed0803c636bae5db409f09a714e9d1c1f7b7d0 i386/kernel-xen-2.6.19-1.2895.fc6.i686.rpm 914ef5cb01ed1faf27022cf112c8a27a3a571754 i386/kernel-PAE-devel-2.6.19-1.2895.fc6.i686.rpm 70e1b47ede529cc2a3fb76db2497e3aee1a2916c i386/kernel-PAE-debug-devel-2.6.19-1.2895.fc6.i686.rpm d76fcd9496d966f7d468314d8da0bc4b5155e920 i386/kernel-kdump-2.6.19-1.2895.fc6.i686.rpm ccbfcb7c99d8eee455b8e1de35345dd00b0d98a7 i386/debug/kernel-kdump-debuginfo-2.6.19-1.2895.fc6.i686.rpm 821c029d978f7611e98ae1d7e0ad4e9c03444b08 i386/kernel-debug-2.6.19-1.2895.fc6.i686.rpm 601e7a380d4d42a81acd313fb394e21f6ce6eb57 i386/kernel-2.6.19-1.2895.fc6.i686.rpm 42c5f0f2cca7c70d65de75143dec125c57646569 i386/kernel-PAE-2.6.19-1.2895.fc6.i686.rpm 899a2ea8cb97c3f0f65b21e293ac27e0cf313a47 i386/debug/kernel-debuginfo-common-2.6.19-1.2895.fc6.i686.rpm 815770acb5d34bc2d43cad11068daf3818e5d5ce i386/kernel-PAE-debug-2.6.19-1.2895.fc6.i686.rpm a75051f74f690f7f6a05f4b0fb9dcbdc49c79753 i386/kernel-debug-devel-2.6.19-1.2895.fc6.i686.rpm 43725e7e4f298ad641407fe5583076d7b9923c8d i386/kernel-devel-2.6.19-1.2895.fc6.i686.rpm a9ffb797e0d566e46245a0d0bea334e71637a5f6 i386/debug/kernel-PAE-debuginfo-2.6.19-1.2895.fc6.i686.rpm 9f6a8a6c1eb375003787a2f52f716a4443b395ae i386/kernel-kdump-devel-2.6.19-1.2895.fc6.i686.rpm 5a2a307165528f9c1075ef8b5909906aaeddae3b i386/debug/kernel-xen-debuginfo-2.6.19-1.2895.fc6.i686.rpm cfbd1d4878a8c5d5b32defe0fbc438ace83b4f50 i386/kernel-xen-devel-2.6.19-1.2895.fc6.i686.rpm 6f232f7ac6a8597357017374606dbaa93a66b53d i386/debug/kernel-PAE-debug-debuginfo-2.6.19-1.2895.fc6.i686.rpm 308b0f48810a6630f1818cfaddc9c15b376e3b82 i386/debug/kernel-debug-debuginfo-2.6.19-1.2895.fc6.i686.rpm 634d6f164e424fc90b785f8348d8ccebcd2cf67f i386/kernel-doc-2.6.19-1.2895.fc6.noarch.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From david at lovesunix.net Thu Jan 11 22:00:20 2007 From: david at lovesunix.net (David Nielsen) Date: Thu, 11 Jan 2007 23:00:20 +0100 Subject: Fedora QA meeting: Wed Jan. 17, 1700UTC In-Reply-To: <1168546891.25699.42.camel@metroid.rdu.redhat.com> References: <1168546891.25699.42.camel@metroid.rdu.redhat.com> Message-ID: <1168552820.26169.44.camel@dawkins> tor, 11 01 2007 kl. 20:21 +0000, skrev Will Woods: > Hello! > > Hope you all enjoyed your winter break from the test meetings. With the > new year comes some new changes: > > 1) Meetings (and bug triage and other general QA/tester discussion) have > been moved to #fedora-qa. We'll still be on freenode, naturally. > 2) We'll be moving to a new mailing list: fedora-qa (when it's set up). > > Some other exciting news: I'll be at FUDCon[1], running a QA Hackfest! > I'm planning to be writing (and helping others write) a whole mess of > RHTS[2] regression tests, and testing the heck out of F7Test1 (which > should be released Jan. 30, 3 days before FUDCon). I'm open to > suggestions for other things to work on, too. Being your faithful minion I'll join the fun via IRC, I can't afford to fly to Boston even though it would be fun.. damn you transatlantic airfare prices! Oh and I am working on that Fedora Love Day proposal for you, I've been sick all December so I simply have no had time. - David > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list -- "Ridicule is the only weapon that can be used against unintelligible propositions. Ideas must be distinct before reason can act upon them.? -Thomas Jefferson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: Dette er en digitalt underskrevet brevdel URL: From berrange at redhat.com Thu Jan 11 22:02:51 2007 From: berrange at redhat.com (Daniel Berrange) Date: Thu, 11 Jan 2007 17:02:51 -0500 Subject: Fedora Core 5 Test Update: xen-3.0.3-3.fc5 Message-ID: <200701112202.l0BM2pEt022415@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-062 2007-01-11 --------------------------------------------------------------------- Product : Fedora Core 5 Name : xen Version : 3.0.3 Release : 3.fc5 Summary : Xen is a virtual machine monitor Description : This package contains the Xen hypervisor and Xen tools, needed to run virtual machines on x86 systems, together with the kernel-xen* packages. Information on how to use Xen can be found at the Xen project pages. Virtualisation can be used to run multiple versions or multiple Linux distributions on one system, or to test untrusted applications in a sandboxed environment. --------------------------------------------------------------------- Update Information: Collection of many small bug fixes backported from latest upstream xen-devel repository / RHEL-5 xen RPM. --------------------------------------------------------------------- * Tue Jan 9 2007 Daniel P. Berrange - 3.0.3-3.fc5 - fix core dumps of 32 bit guests >2GB RAM (bz 215796) - write the /local/domain/vm node early in the startup process (bz 215269) - fix memory boundary checking in qemu-dm (bz 221119) - add --force option to xenbus device detach code (bz 217853) - fix keeping track of HVM vnc password (bz 218050) - enable DMA on HVM virtual cdrom drive (bz 218357) - new paravirt framebuffer, as merged upstream (bz 218050) - more cosmetic pygrub fixing (bz 215316) - make ballooning work right (bz 212069) - do not auto-start a domain that was restored from a save (bz 217295) - use log level info for messages that are not errors (bz 218759) - Allows HTTP request to dump core of a domain (bz 214913) - catch it when an HVM guest tries to use hde (bz 217736) - make "xm list" display how much memory a domain really has (bz 217443) - pass qemu and blktap I/O errors back to the guest (bz 217765, 217859) - fix 2TB overflow/wraparound in blktap (bz 217580) - various fixes from Herbert Xu's security audit - allow HVM virtual floppy to be a device on dom0 (bz 216449) - make uppercase characters always work in HVM console (bz 217554) - move the dump path to /var/lib/xen (bug 212558) * Tue Nov 14 2006 Juan Quintela - 3.0.3-2.fc5 - add vmxassist fix from RHEL5. * Mon Oct 30 2006 Daniel P. Berrange - 3.0.3-1.fc5 - Update to xen-3.0.3 changeset 11774 - Pull in paravirt framebuffer patches - Pull in VNC password patches for full & para-virt framebuffer - Fix xenguest-install.py to use a read-write libvirt connection - Make /etc/xen & /var/log/xen mode 0700 restricted to protect VNC password - Add /var/lib/xen/images as a dir for storing file based disk images - Added pygrub fixes for many kernels & cursor cosmetics * Wed Sep 20 2006 Juan Quintela - 3.0.2-4.FC5 - Update to xen-unstable cset: 11540. * Wed Jun 21 2006 Daniel Veillard - 3.0.2-3.FC5 - Add missing xen-compat.h needed to compile on the new xen sources * Tue Jun 20 2006 Stephen C. Tweedie - 3.0.2-2.FC5 - Add BuildRequires: for gnu/stubs-32.h so that x86_64 builds pick up glibc32 correctly - Update to xen-unstable cset 10278 (from rawhide) to enable kernel rebase --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ 9adc08b7be9f7b6e716909b2beaa4236e498294a SRPMS/xen-3.0.3-3.fc5.src.rpm 9adc08b7be9f7b6e716909b2beaa4236e498294a noarch/xen-3.0.3-3.fc5.src.rpm 19dbc7b4eb2ea1e9614874e185a10047aa16f5e8 x86_64/debug/xen-debuginfo-3.0.3-3.fc5.x86_64.rpm b9a8ce36f498bd60370e6b0186c64c8973987c34 x86_64/xen-3.0.3-3.fc5.x86_64.rpm 5991d9756e48aa4654ead31983d7e339b4e1d6ca i386/xen-3.0.3-3.fc5.i386.rpm 7ec542f4936e051869a4cac250d885bee2c23cb2 i386/debug/xen-debuginfo-3.0.3-3.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From berrange at redhat.com Thu Jan 11 22:04:47 2007 From: berrange at redhat.com (Daniel Berrange) Date: Thu, 11 Jan 2007 17:04:47 -0500 Subject: Fedora Core 6 Test Update: xen-3.0.3-3.fc6 Message-ID: <200701112204.l0BM4lFL022838@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-064 2007-01-11 --------------------------------------------------------------------- Product : Fedora Core 6 Name : xen Version : 3.0.3 Release : 3.fc6 Summary : Xen is a virtual machine monitor Description : This package contains the Xen hypervisor and Xen tools, needed to run virtual machines on x86 systems, together with the kernel-xen* packages. Information on how to use Xen can be found at the Xen project pages. Virtualisation can be used to run multiple versions or multiple Linux distributions on one system, or to test untrusted applications in a sandboxed environment. --------------------------------------------------------------------- Update Information: Collection of many small bug fixes backported from latest upstream xen-devel repository / RHEL-5 xen RPM. --------------------------------------------------------------------- * Tue Jan 9 2007 Daniel P. Berrange - 3.0.3-3.fc6 - Bump release number, just so that we're newer than FC-5 Xen RPM. * Tue Jan 9 2007 Daniel P. Berrange - 3.0.3-2.fc6 - fix core dumps of 32 bit guests >2GB RAM (bz 215796) - write the /local/domain/vm node early in the startup process (bz 215269) - fix memory boundary checking in qemu-dm (bz 221119) - add --force option to xenbus device detach code (bz 217853) - fix keeping track of HVM vnc password (bz 218050) - enable DMA on HVM virtual cdrom drive (bz 218357) - new paravirt framebuffer, as merged upstream (bz 218050) - more cosmetic pygrub fixing (bz 215316) - make ballooning work right (bz 212069) - do not auto-start a domain that was restored from a save (bz 217295) - use log level info for messages that are not errors (bz 218759) - Allows HTTP request to dump core of a domain (bz 214913) - catch it when an HVM guest tries to use hde (bz 217736) - make "xm list" display how much memory a domain really has (bz 217443) - pass qemu and blktap I/O errors back to the guest (bz 217765, 217859) - fix 2TB overflow/wraparound in blktap (bz 217580) - various fixes from Herbert Xu's security audit - allow HVM virtual floppy to be a device on dom0 (bz 216449) - make uppercase characters always work in HVM console (bz 217554) - move the dump path to /var/lib/xen (bug 212558) * Tue Nov 14 2006 Juan Quintela - 3.0.3-1.fc6 - Update to xen-3.0.3-8.rhel5. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ e7fd4e1a4920131182e1964e6c798aa6943cf44e SRPMS/xen-3.0.3-3.fc6.src.rpm e7fd4e1a4920131182e1964e6c798aa6943cf44e noarch/xen-3.0.3-3.fc6.src.rpm 73b385c7bbd8da1098725a2a53d6fc864a205ca1 x86_64/xen-3.0.3-3.fc6.x86_64.rpm 865f5e5d87db31d04487b515e66a5e5ea0b3e159 x86_64/xen-libs-3.0.3-3.fc6.x86_64.rpm b5b71ea76fb6329074203275872f61fb0dce404e x86_64/debug/xen-debuginfo-3.0.3-3.fc6.x86_64.rpm e06e1a18d6de4ab2322884b8dae819d313e7fb1a x86_64/xen-devel-3.0.3-3.fc6.x86_64.rpm 68139e6e4280ff355b3d81b9144bf4d05a6da5ac i386/xen-devel-3.0.3-3.fc6.i386.rpm ff56f8245c94736d5d627440a83e9bbb9f1d4f15 i386/xen-libs-3.0.3-3.fc6.i386.rpm 7f11bc09632b2aa0083176485e5377d8e190d984 i386/xen-3.0.3-3.fc6.i386.rpm 43bc4b98770516c128e4c74d6fc7642a1a2b4cac i386/debug/xen-debuginfo-3.0.3-3.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From fct-cornette at insight.rr.com Fri Jan 12 01:04:21 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Thu, 11 Jan 2007 20:04:21 -0500 Subject: RPM database all messed up after update Message-ID: <45A6DE95.5020301@insight.rr.com> I just applied updates minus the menus that were in conflict, so these were excluded. I figured everything was successful so I deleted the package cache. (bad move!) Anyway, I figured that I'd run 'yum list updates' and get back the two packages which I excluded for the transaction. I got back a list of packages which were "successfully installed" but the database for rpm did not change the entries. Without going into a lot of details. rpm -q kernel shows kernels below installed. Running rpm -qV kernel-2.6.19-1.2905.fc7 shows a list of missing files for the removed kernel. rpm -q kernel kernel-2.6.19-1.2906.fc7 kernel-2.6.19-1.2905.fc7 ls of boot shows: s config-2.6.19-1.2906.fc7 memtest86+-1.65 config-2.6.19-1.2909.fc7 newinitrd grub System.map-2.6.19-1.2906.fc7 initrd-2.6.19-1.2906.fc7.img System.map-2.6.19-1.2909.fc7 initrd-2.6.19-1.2909.fc7.img vmlinuz-2.6.19-1.2906.fc7 lost+found vmlinuz-2.6.19-1.2909.fc7 grub.conf lists the actual newest and the running kernel and not the 2905 version that was removed. What would be a good way to get the database to reflect the actually installed packages? To be brief, the yum.log lists these last entries. There were 80 rpms updated. Jan 11 18:48:18 Updated: libgnomeui-debuginfo.i386 2.17.1-1.fc7 Jan 11 18:48:21 Updated: alsa-utils.i386 1.0.14-0.2.rc1.fc7 Jan 11 18:48:22 Updated: logrotate.i386 3.7.4-10.fc7 Jan 11 18:48:23 Updated: postgresql-python.i386 8.2.1-1.fc7 Jan 11 18:49:00 Updated: postgresql-server.i386 8.2.1-1.fc7 Jan 11 18:49:49 Installed: kernel.i686 2.6.19-1.2909.fc7 Jan 11 18:49:51 Updated: cpuspeed.i386 1:1.2.1-1.52.fc7 Jan 11 18:49:52 Updated: gimp-print-utils.i386 4.2.7-24.fc7 Jan 11 18:49:56 Updated: gawk.i386 3.1.5-12.fc7 Jan 11 18:49:58 Updated: iptables-ipv6.i386 1.3.7-1.1 Jan 11 18:49:59 Updated: elfutils.i386 0.125-3.fc7 I'll file a bug report with the details. Now with all of the updates in place, rpm will error out when checking for file versions. --> Running transaction check --> Processing Conflict: elfutils-libelf conflicts elfutils > 0.124-1.fc6 --> Processing Conflict: elfutils-libs conflicts elfutils > 0.124-1.fc6 --> Processing Conflict: elfutils-libelf conflicts elfutils-libelf-devel > 0.124-1.fc6 --> Finished Dependency Resolution Error: elfutils-libelf conflicts with elfutils > 0.124-1.fc6 Error: elfutils-libs conflicts with elfutils > 0.124-1.fc6 Error: elfutils-libelf conflicts with elfutils-libelf-devel > 0.124-1.fc6 Jim -- That money talks, I'll not deny, I heard it once, It said "Good-bye. -- Richard Armour From fct-cornette at insight.rr.com Fri Jan 12 02:19:09 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Thu, 11 Jan 2007 21:19:09 -0500 Subject: RPM database all messed up after update In-Reply-To: <45A6DE95.5020301@insight.rr.com> References: <45A6DE95.5020301@insight.rr.com> Message-ID: <45A6F01D.4050108@insight.rr.com> Jim Cornette wrote: Correcting the problem was not too difficult. I just needed to run the below to redo the transaction. yum --exclude=gnome-menus-2.17.5-1.fc7 --exclude=redhat-menus-7.8.9-1.fc7 --exclude "elfutil*" -y update Checking for updates only shows now what I expected, except for the elfutils packages. Updated Packages elfutils.i386 0.125-3.fc7 development elfutils-libelf-devel.i386 0.125-3.fc7 development gnome-menus.i386 2.17.5-1.fc7 development Jim -- After a few boring years, socially meaningful rock 'n' roll died out. It was replaced by disco, which offers no guidance to any form of life more advanced than the lichen family. -- Dave Barry, "Kids Today: They Don't Know Dum Diddly Do" From michal at harddata.com Fri Jan 12 02:21:23 2007 From: michal at harddata.com (Michal Jaegermann) Date: Thu, 11 Jan 2007 19:21:23 -0700 Subject: RPM database all messed up after update In-Reply-To: <45A6DE95.5020301@insight.rr.com> References: <45A6DE95.5020301@insight.rr.com> Message-ID: <20070112022123.GA2265@mail.harddata.com> On Thu, Jan 11, 2007 at 08:04:21PM -0500, Jim Cornette wrote: > > What would be a good way to get the database to reflect the actually > installed packages? $ rpm --help | grep -A1 justdb --justdb update the database, but do not modify the filesystem I am afraid that you still need packages you want to feed to rpm. Start with 'rpm --rebuilddb' and see what are results. Repeat few times if necessary. Michal From paul at permanentmail.com Fri Jan 12 02:30:18 2007 From: paul at permanentmail.com (Paul Dickson) Date: Thu, 11 Jan 2007 19:30:18 -0700 Subject: RPM database all messed up after update In-Reply-To: <45A6DE95.5020301@insight.rr.com> References: <45A6DE95.5020301@insight.rr.com> Message-ID: <20070111193018.4fe1a612.paul@permanentmail.com> On Thu, 11 Jan 2007 20:04:21 -0500, Jim Cornette wrote: > Without going into a lot of details. rpm -q kernel shows kernels below > installed. Running rpm -qV kernel-2.6.19-1.2905.fc7 shows a list of > missing files for the removed kernel. > > rpm -q kernel > kernel-2.6.19-1.2906.fc7 > kernel-2.6.19-1.2905.fc7 You might try: rpm -i --replacepkgs kernel-2.6.19-1.2905.... You might add the --oldpackage option too. -Paul From fct-cornette at insight.rr.com Fri Jan 12 03:55:48 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Thu, 11 Jan 2007 22:55:48 -0500 Subject: RPM database all messed up after update In-Reply-To: <20070111193018.4fe1a612.paul@permanentmail.com> References: <45A6DE95.5020301@insight.rr.com> <20070111193018.4fe1a612.paul@permanentmail.com> Message-ID: <45A706C4.3020100@insight.rr.com> Paul Dickson wrote: > On Thu, 11 Jan 2007 20:04:21 -0500, Jim Cornette wrote: > >> Without going into a lot of details. rpm -q kernel shows kernels below >> installed. Running rpm -qV kernel-2.6.19-1.2905.fc7 shows a list of >> missing files for the removed kernel. >> >> rpm -q kernel >> kernel-2.6.19-1.2906.fc7 >> kernel-2.6.19-1.2905.fc7 > > You might try: rpm -i --replacepkgs kernel-2.6.19-1.2905.... > > You might add the --oldpackage option too. > > -Paul > The newer rpm for 2909 was installed and only the database entry for the 2905 was installed on the system. I got the kernel to install correctly and add to the database by running yum again. It installed the packages again and removed the 2905 entry. For the updated packages, it was a big mess. I had about 41 multiple versioned entries in the rpm db again. There was the removed datawise but not from the rpmdb and the actually installed packages. I filed a report for the incident. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=222400 Jim From fct-cornette at insight.rr.com Fri Jan 12 04:19:09 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Thu, 11 Jan 2007 23:19:09 -0500 Subject: RPM database all messed up after update In-Reply-To: <20070112022123.GA2265@mail.harddata.com> References: <45A6DE95.5020301@insight.rr.com> <20070112022123.GA2265@mail.harddata.com> Message-ID: <45A70C3D.6010009@insight.rr.com> Michal Jaegermann wrote: > On Thu, Jan 11, 2007 at 08:04:21PM -0500, Jim Cornette wrote: >> What would be a good way to get the database to reflect the actually >> installed packages? > > $ rpm --help | grep -A1 justdb > --justdb update the database, but do not modify the > filesystem > > I am afraid that you still need packages you want to feed > to rpm. Start with 'rpm --rebuilddb' and see what are results. > Repeat few times if necessary. > > Michal > I just let the transaction happen in full glory all over again. This added the latest packages to the db but left the older entries from the actually erased packages lingering in the database. I then had to remove the older fictitious rpmdb entries with rpm -e --justdb Before all of this trouble, I ran rpm --rebuilddb but there were still the older rpm entries within the db. I knew the newest packages were actually installed. I'm guessing that the elfutils packages along with having a kernel install in the transaction may have tickled the error. The kernel because of the mysterious error with yum when a package is being installed among the upgraded rpm transactions. Hopefully this error does not happen again with this error. At least the at-spi package correction got rid of all of those closing programs which were launching bug-buddy. There isn't anything in yum which could have been triggered by ORBit2 or at-spi is there which would of caused this yum transaction error? Jim -- To err is human, but I can REALLY foul things up. From buildsys at redhat.com Fri Jan 12 11:43:36 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Fri, 12 Jan 2007 06:43:36 -0500 Subject: rawhide report: 20070112 changes Message-ID: <200701121143.l0CBhaII001534@hs20-bc2-6.build.redhat.com> Updated Packages: control-center-1:2.17.5-1.fc7 ----------------------------- * Thu Jan 11 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 * Sat Dec 09 2006 Matthias Clasen - 2.17.3-2 - Spec file cleanups cpuspeed-1:1.2.1-1.53.fc7 ------------------------- * Thu Jan 11 2007 Jarod Wilson - Fix up documentation in config file (#219926) - Fall back cleanly to userspace governor on non-centrino/powernow-k8/p4-clockmod systems - Update description to reflect support for kernel-space freq scaling device-mapper-1.02.14-1.fc7 --------------------------- * Thu Jan 11 2007 Alasdair Kergon - 1.02.14-1 - Use CFLAGS when linking so mixed sparc builds can supply -m64. - Export dm_basename() and dm_tree_use_no_flush_suspend(). - Cope with a trailing space when comparing tables prior to possible reload. * Tue Nov 28 2006 Alasdair Kergon - 1.02.13-1 - Update dmsetup man page (setgeometry & message). - Suppress encryption key in 'dmsetup table' output unless --showkeys supplied. * Sat Oct 14 2006 Alasdair Kergon - 1.02.12-3 - Drop the release suffix. diffstat-1.43-1.fc7 ------------------- * Thu Jan 11 2007 Tim Waugh 1.43-1 - 1.43. Fixes bug #187350. No longer need compress patch. eclipse-changelog-1:2.3.3-3.fc7 ------------------------------- * Thu Jan 11 2007 Kyu Lee 2.3.3-3 - Updated license information. - Use copy-platform in %{_datadir}. fonts-indic-2.0.13-1.fc7 ------------------------ * Fri Jan 12 2007 Parag Nemade - 2.0.13-1 - Resolves: RH#220880 for [or_IN], RH#222406 for [ml_IN] (Parag Nemade) foomatic-3.0.2-45.fc7 --------------------- * Thu Jan 11 2007 Tim Waugh 3.0.2-45 - Leave gutenprint-recommended printers alone, rather than pointing them to gimp-print as before. gdb-6.5-24.fc7 -------------- * Thu Jan 11 2007 Jan Kratochvil - 6.5-24 - Backport readline history for input mode commands like `command' (BZ 215816). * Tue Jan 09 2007 Jan Kratochvil - 6.5-23 - Find symbols properly at their original (included) file (BZ 109921). - Remove the stuck mock(1) builds disfunctional workaround (-> mock BZ 221351). * Sat Dec 30 2006 Jan Kratochvil - 6.5-22 - Fix unwinding crash on older gcj(1) code (extended CFI support) (BZ 165025). - Include testcase for the readline history of input mode commands (BZ 215816). gettext-0.16.1-1.fc7 -------------------- * Fri Dec 22 2006 Jens Petersen - 0.16.1-1 - update to 0.16.1 * Mon Nov 27 2006 Jens Petersen - 0.16-2 - re-enable openmp on ia64 * Thu Nov 23 2006 Jens Petersen - 0.16-1 - update to 0.16 release - disable openmp on ia64 (#216988) gnome-session-2.17.5-1.fc7 -------------------------- * Wed Jan 10 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 hunspell-1.1.4-4.fc7 -------------------- * Thu Jan 11 2007 Caolan McNamara - 1.1.4-4 - fix out of range kernel-2.6.19-1.2911.fc7 ------------------------ * Thu Jan 11 2007 Kristian H??gsberg - Add and enable alternative firewire stack. * Thu Jan 11 2007 Jeremy Katz - disable nmi watchdog by default libselinux-1.33.4-1.fc7 ----------------------- libwpd-0.8.8-1 -------------- * Thu Jan 11 2007 Caolan McNamara - 0.8.8-1 - next version linuxdoc-tools-0.9.21-8.fc7 --------------------------- * Thu Jan 11 2007 Tim Waugh 0.9.21-8 - Applied patch from Kir Kolyshkin (bug #204902): - added a patch from debian bug #321998 (obsoletes patch -badif) lvm2-2.02.18-1.fc7 ------------------ * Thu Jan 11 2007 Alasdair Kergon - 2.02.18-1 - Use CFLAGS when linking so mixed sparc builds can supply -m64. - Prevent permission changes on active mirrors. - Print warning instead of error message if lvconvert cannot zero volume. - Add snapshot options to lvconvert man page. - dumpconfig accepts a list of configuration variables to display. - Change dumpconfig to use --file to redirect output to a file. - Avoid vgreduce error when mirror code removes the log LV. - Fix ambiguous vgsplit error message for split LV. - Fix lvextend man page typo. - Use no flush suspending for mirrors. - Fix create mirror with name longer than 22 chars. net-snmp-1:5.4-7.fc7 -------------------- * Thu Jan 11 2007 Radek Vok??l - 5.4-7 - fix ethtool extension (#222268) * Thu Jan 11 2007 Radek Vok??l - 5.4-6 - swith to new disman implementation numactl-0.9.8-1.38 ------------------ * Thu Jan 11 2007 Neil Horman - 0.9.8-1.38 - Fixed -devel to depend on base package so libnuma.so resolves * Thu Sep 21 2006 Neil Horman - 0.9.8-1.36 - adding nodebind patch for bz 207404 openoffice.org-1:2.1.0-6.12 --------------------------- * Thu Jan 11 2007 Caolan McNamara - 1:2.1.0-6.12 - Resolves: rhbz#216089 if there is no font at all to handle something pango-1.15.3-4.fc7 ------------------ * Thu Jan 11 2007 Behdad Esfahbod - 1.15.3-4 - Undo the posttrans change. That's a no no. We now regenerate the module file in postun if there are any other pango versions left. This should take care of the problem in the future. * Thu Jan 11 2007 Behdad Esfahbod - 1.15.3-3 - Move pango.modules generation to posttrans, to make sure modules available in an older version but not this one are removed. - Resolves #222217 policycoreutils-1.33.12-1.fc7 ----------------------------- * Tue Jan 09 2007 Dan Walsh 1.33.12-1 - Want to update to match api - Update to upstream * Merged newrole securetty check from Dan Walsh. * Merged semodule patch to generalize list support from Karl MacMillan. Resolves: #200110 * Tue Jan 09 2007 Dan Walsh 1.33.11-1 - Update to upstream * Merged fixfiles and seobject fixes from Dan Walsh. * Merged semodule support for list of modules after -i from Karl MacMillan. procinfo-18-20.fc7 ------------------ * Thu Jan 11 2007 Karel Zak 18-20 - bye bye libtermcap redhat-menus-7.8.9-2.fc7 ------------------------ * Thu Jan 11 2007 Matthias Clasen - 7.8.9-2 - Resolve a conflict with gnome-menus rhpl-0.200-1 ------------ * Thu Jan 11 2007 Paul Nasrat - 0.200-1 - Add PS3 ppc machine type setroubleshoot-1.8.14-1.fc7 --------------------------- * Thu Jan 11 2007 John Dennis - 1.8.14-1 - Resolves: bug# 221850 plugin module loading was failing in python 2.5 with the message "SystemError: Parent module 'plugins' not loaded". This is due to a change in behavior between python 2.4 and 2.5, in python 2.4 the lack of a parent module was silently ignored. The fix is to load plugins.__init__ first. system-config-httpd-5:1.4.3-1.fc7 --------------------------------- * Thu Jan 11 2007 Phil Knirsch 1.4.3-1.fc7 - Small manpage fix to be docbook compatible (#221191) util-linux-2.13-0.49.fc7 ------------------------ * Thu Jan 11 2007 Karel Zak 2.13-0.49 - fix #222293 - undocumented partx,addpart, delpart Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From ndbecker2 at gmail.com Fri Jan 12 12:25:08 2007 From: ndbecker2 at gmail.com (Neal Becker) Date: Fri, 12 Jan 2007 07:25:08 -0500 Subject: [SECURITY] Fedora Core 6 Test Update: kernel-2.6.19-1.2895.fc6 References: <200701112151.l0BLp3gS018621@int-mx1.corp.redhat.com> Message-ID: Dave Jones wrote: > --------------------------------------------------------------------- > Fedora Test Update Notification > FEDORA-2007-058 > 2007-01-11 > --------------------------------------------------------------------- Nit: I can't find any mention of just what is the [SECURITY] update about. If it really is an important security update, please make the nature of it more obvious so I can tell if it's important to me. From jim at jbsys.com Fri Jan 12 18:06:49 2007 From: jim at jbsys.com (Jim Bevier) Date: Fri, 12 Jan 2007 11:06:49 -0700 Subject: patches for pata disks on sata promise controller References: <459D86C2.4080006@jbsys.com> <20070105001831.GF17816@redhat.com> Message-ID: <004001c73674$6e7c3ad0$0a01a8c0@jbsys> ----- Original Message ----- From: "Dave Jones" To: "James C. Bevier" Cc: ; Sent: Thursday, January 04, 2007 5:18 PM Subject: Re: patches for pata disks on sata promise controller > On Thu, Jan 04, 2007 at 03:59:14PM -0700, James C. Bevier wrote: > > Since the 2.4 kernel, I have had to patch sata_promise.c and libata.c to > > recognize pata disks. When the kernel was updated to 2.6.19, all of the > > patches were discarded. > > The 2.6.19 rebase is incomplete. This is why it isn't in updates-testing > yet. > Pretty much all the stuff that had conflicts get commented out for the > time being. > > > Why were these patches not integrated upstream > > over the last two years? > > I'll leave Jeff to answer that one. I know I'm tired of carrying it too. > > > Now the code has been redesigned by someone > > (Jeff?) and the patches invalidated. Here is a first pass at the > > patches for the 2.6.19 and beyond kernels. Dave, could you review the > > patch and incorporate them into the next kernel rev? They seem to work > > for me, but they needed to be tested with a system that has sata disks > > to make sure I did not screw them up. Here is the patch and the diffs > > for the spec file. > > Jeff, care to eyeball this? > (Same diff James sent, but with some indentation fixes) > > Thanks, > > Dave > > > old patch deleted................. > Dave, Here is a revised patch for using pata drives on the sata_promise 2037x controller. I took out some of the patch that was not getting executed. This patch was tested with the 2909 kernel. I re-enabled the patch2200 code in the spec file to use this new patch. I sure would like to see this in the next release of the kernel so it can be widely tested. This is a replacement for the pre 2.6.19 patch that no longer works. It has been two years for the sata_promise patch, so you would think it should be main stream by now. Jim -------------- next part -------------- A non-text attachment was scrubbed... Name: linux-2.6.19-sata-promise-pata-ports.patch Type: application/octet-stream Size: 2861 bytes Desc: not available URL: From twaugh at redhat.com Fri Jan 12 19:36:55 2007 From: twaugh at redhat.com (Tim Waugh) Date: Fri, 12 Jan 2007 14:36:55 -0500 Subject: Fedora Core 5 Test Update: cups-1.2.6-1.4.fc5 Message-ID: <200701121936.l0CJatU4022127@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-1219 2007-01-12 --------------------------------------------------------------------- Product : Fedora Core 5 Name : cups Version : 1.2.6 Release : 1.4.fc5 Summary : Common Unix Printing System Description : The Common UNIX Printing System provides a portable printing layer for UNIX?? operating systems. It has been developed by Easy Software Products to promote a standard printing solution for all UNIX vendors and users. CUPS provides the System V and Berkeley command-line interfaces. --------------------------------------------------------------------- Update Information: New version. --------------------------------------------------------------------- * Fri Jan 12 2007 Tim Waugh 1:1.2.6-1.4 - Don't even reload CUPS when rotating logs (bug #215024). * Wed Dec 6 2006 Tim Waugh 1:1.2.6-1.3 - Fixed extra EOF in pstops output (bug #216154, STR #2111). * Fri Nov 10 2006 Tim Waugh 1:1.2.6-1.2 - Reload, don't restart, when logrotating (bug #215023). * Thu Nov 9 2006 Tim Waugh 1:1.2.6-1.1 - 1.2.6. * Mon Nov 6 2006 Tim Waugh 1:1.2.5-1.4 - One more D-Bus signal fix (bug #212763). * Fri Nov 3 2006 Tim Waugh 1:1.2.5-1.3 - Restore missed JobQueuedRemote D-Bus signal in ipp backend (part of bug #212763). * Mon Oct 30 2006 Tim Waugh 1:1.2.5-1.2 - Fixed support for /dev/ttyUSB devices (bug #212577, STR #2061). - Fixed parallel backend (bug #213021, STR #2056). * Mon Oct 23 2006 Tim Waugh 1:1.2.5-1.1 - 1.2.5. * Fri Sep 22 2006 Tim Waugh 1:1.2.4-1.1 - 1.2.4 (fixes bug #206763). No longer need str1968 patch. - No longer need no-propagate-ipp-port patch. * Wed Sep 13 2006 Tim Waugh 1:1.2.3-1.6 - Turn off DEBUG again. * Wed Sep 13 2006 Tim Waugh 1:1.2.3-1.5 - Try a small http.c fix (bug #205619). * Wed Sep 13 2006 Tim Waugh 1:1.2.3-1.4 - Define DEBUG in cups/http.c and cups/request.c. * Mon Sep 11 2006 Tim Waugh 1:1.2.3-1.3 - Applied upstream patch to fix STR #1968 (bug #205619). * Tue Sep 5 2006 Tim Waugh - No longer need CAN-2005-0064 patch (fixed upstream). * Wed Aug 30 2006 Tim Waugh 1:1.2.3-1.2 - Don't overwrite snmp.c. - No longer need str1893 patch. * Wed Aug 30 2006 Tim Waugh 1:1.2.3-1.1 - 1.2.3. No longer need str1880 or str1881 patches. * Thu Aug 24 2006 Tim Waugh 1:1.2.2-1.9 - Updated fix for STR #1881 from upstream. * Fri Aug 18 2006 Tim Waugh - Own notifier directory (bug #203085). * Wed Aug 16 2006 Tim Waugh 1:1.2.2-1.8 - Apply patch to fix STR #1880 (bug #200205). * Wed Aug 16 2006 Tim Waugh - Added a clause in the %post scriptlet to remove bad remote.cache files (bug #201800). * Wed Aug 16 2006 Tim Waugh 1:1.2.2-1.7 - Use upstream patch to fix STR #1881. - Remove 'Provides: LPRng = 3.8.15-3' (bug #148757). * Fri Aug 11 2006 Tim Waugh 1:1.2.2-1.6 - Apply patch to fix STR #1893 (bug #201800). * Sun Aug 6 2006 Tim Waugh 1:1.2.2-1.5 - Apply patch from STR #1881 for remote IPP printing (bug #201167). * Wed Aug 2 2006 Tim Waugh 1:1.2.2-1.4 - Use sigaction, not signal, to set the alarm handler in the snmp backend (bug #200205). * Tue Aug 1 2006 Tim Waugh 1:1.2.2-1.3 - Use try_connect() before httpConnect() in snmp backend (bug #200205). * Fri Jul 28 2006 Tim Waugh 1:1.2.2-1.2 - Use replacement snmp.c from STR #1737 (bug #193093). * Thu Jul 20 2006 Tim Waugh 1:1.2.2-1.1 - 1.2.2. * Wed Jul 19 2006 Tim Waugh 1:1.2.1-1.13 - Sync with svn5754. Fixes bug #198987, bug #195532, bug #130118. * Fri Jul 14 2006 Tim Waugh 1:1.2.1-1.12 - Sync with svn5737. * Tue Jul 4 2006 Tim Waugh 1:1.2.1-1.11 - Sync with svn5706. - No longer need localhost, str1740, str1758, str1736, str1776 patches. - Removed backend patch. - Use --enable-pie instead of patching it in. * Thu Jun 15 2006 Tim Waugh 1:1.2.1-1.10 - Fixed cupsd network default printer crash (STR #1776). * Tue Jun 13 2006 Tim Waugh 1:1.2.1-1.9 - Remove certs directory in %post, not %postun. * Tue Jun 13 2006 Tim Waugh 1:1.2.1-1.8 - Remove old-style certs directory after upgrade (bug #194581). * Wed Jun 7 2006 Tim Waugh 1:1.2.1-1.7 - Prevent 'too many open files' error (STR #1736, bug #194368). * Wed Jun 7 2006 Tim Waugh 1:1.2.1-1.6 - Fix 'Allow from @IF(...)' (STR #1758, bug #187703). * Wed Jun 7 2006 Tim Waugh 1:1.2.1-1.5 - ServerBin compatibility patch (bug #194005). * Fri Jun 2 2006 Tim Waugh 1:1.2.1-1.4 - Applied upstream patch to fix STR #1740 (bug #192809). * Thu Jun 1 2006 Tim Waugh - Fixed group ownerships again (bug #192880). * Wed May 24 2006 Tim Waugh 1:1.2.1-1.3 - Fix 'localhost' fallback in httpAddrGetList() (bug #192628, STR #1723). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ 452963f0572a6dec417be82a1b12f73dda57df25 SRPMS/cups-1.2.6-1.4.fc5.src.rpm 452963f0572a6dec417be82a1b12f73dda57df25 noarch/cups-1.2.6-1.4.fc5.src.rpm 1b63be81a1d3d2caca174b826b9e81fa2412d2ad ppc/debug/cups-debuginfo-1.2.6-1.4.fc5.ppc.rpm cd831c5fddb3fa6eff35a7f441317c53dd9eb6be ppc/cups-1.2.6-1.4.fc5.ppc.rpm afaef165ff803512e6c284f3a49bd21ed2db3490 ppc/cups-lpd-1.2.6-1.4.fc5.ppc.rpm 0b3476749bfd0c75d402472eb7ebc50b8466fe2a ppc/cups-devel-1.2.6-1.4.fc5.ppc.rpm 616e7667dea5577909e0aaca907556299821306b ppc/cups-libs-1.2.6-1.4.fc5.ppc.rpm 89756a4b16f7dfae5a34b05d5a0529862dc16c89 x86_64/cups-1.2.6-1.4.fc5.x86_64.rpm 5543d9e68bf813355ee26429f85f0dfa3067d38e x86_64/cups-libs-1.2.6-1.4.fc5.x86_64.rpm c2243b0fef1100e1466b152675e68378c92175e5 x86_64/cups-lpd-1.2.6-1.4.fc5.x86_64.rpm 91b1050206daa451ae32aa51294df1f1faff5e55 x86_64/cups-devel-1.2.6-1.4.fc5.x86_64.rpm c5cc7be7ce98d2f55b89051114cbed2d314c7e06 x86_64/debug/cups-debuginfo-1.2.6-1.4.fc5.x86_64.rpm b4d218d09fd05a24f4e0de2f948bff52120da8b2 i386/cups-libs-1.2.6-1.4.fc5.i386.rpm b9f203cd645cdfb30cc00c1642835827cffcecba i386/cups-lpd-1.2.6-1.4.fc5.i386.rpm b9d17bcacc3a511b4d613148b1fe4fc6d40d5404 i386/debug/cups-debuginfo-1.2.6-1.4.fc5.i386.rpm de7a164ce12d335223ee9c2ccf905fade1228b1b i386/cups-1.2.6-1.4.fc5.i386.rpm abff56468f543aa3bb703901b8dc66dddecc98c4 i386/cups-devel-1.2.6-1.4.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Fri Jan 12 19:38:37 2007 From: twaugh at redhat.com (Tim Waugh) Date: Fri, 12 Jan 2007 14:38:37 -0500 Subject: Fedora Core 6 Test Update: ghostscript-8.15.3-2.fc6 Message-ID: <200701121938.l0CJcbQK022560@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-065 2007-01-12 --------------------------------------------------------------------- Product : Fedora Core 6 Name : ghostscript Version : 8.15.3 Release : 2.fc6 Summary : A PostScript(TM) interpreter and renderer. Description : Ghostscript is a set of software that provides a PostScript(TM) interpreter, a set of C procedures (the Ghostscript library, which implements the graphics capabilities in the PostScript language) and an interpreter for Portable Document Format (PDF) files. Ghostscript translates PostScript code into many common, bitmapped formats, like those understood by your printer or screen. Ghostscript is normally used to display PostScript files and to print PostScript files to non-PostScript printers. If you need to display PostScript files or print them to non-PostScript printers, you should install ghostscript. If you install ghostscript, you also need to install the ghostscript-fonts package. --------------------------------------------------------------------- Update Information: Bug fix update. --------------------------------------------------------------------- * Fri Jan 12 2007 Tim Waugh 8.15.3-2 - Own cjkv directory (bug #221380, bug #222375). * Tue Dec 5 2006 Tim Waugh 8.15.3-1 - 8.15.3. No longer need gtk2, ps2epsi, badc, pagesize, use-external-freetype, split-font-configuration or cjkv patches. - Renumbered patches. * Mon Nov 27 2006 Tim Waugh 8.15.2-9.2 - Added split-cidfnmap patch (bug #194592). * Thu Nov 16 2006 Tim Waugh 8.15.2-9.1 - Added missing part to CJKV patch (bug #194592). * Tue Oct 3 2006 Tim Waugh 8.15.2-9 - Apply CJKV patch from svn164:165 plus the fix from svn173:174 (bug #194592, bug #203712, possibly bug #167596). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 43da1dcf7bf8666977997dccb7f3231d3d7ad7a6 SRPMS/ghostscript-8.15.3-2.fc6.src.rpm 43da1dcf7bf8666977997dccb7f3231d3d7ad7a6 noarch/ghostscript-8.15.3-2.fc6.src.rpm 549e035a1409499df8cef3bd25047970c735c5f4 ppc/ghostscript-gtk-8.15.3-2.fc6.ppc.rpm 646c6e4f14c0817452a20109abab9b6adcf6e9fe ppc/ghostscript-8.15.3-2.fc6.ppc.rpm e709118a2fd0f81fe8c303dfabffde7798bdbbe9 ppc/ghostscript-devel-8.15.3-2.fc6.ppc.rpm d4f9dffeed623886abbd02a51f5c9a90641b4565 ppc/debug/ghostscript-debuginfo-8.15.3-2.fc6.ppc.rpm e3d54adabb3ff69f4f67ab34ae6e82fc5b2f6789 x86_64/ghostscript-devel-8.15.3-2.fc6.x86_64.rpm 2a6579504e388bd01f5825700f8a3c8ca4a94b42 x86_64/ghostscript-8.15.3-2.fc6.x86_64.rpm d5c3544278a8daf80c4761c019f84bb073a56223 x86_64/debug/ghostscript-debuginfo-8.15.3-2.fc6.x86_64.rpm ac0be2a7196fad6788e9cb67217a387643da1c2a x86_64/ghostscript-gtk-8.15.3-2.fc6.x86_64.rpm 47fb4345f44cc38c281947672db7750ec4110ae5 i386/ghostscript-8.15.3-2.fc6.i386.rpm bf9a47ff15dac830b6203beaf07ea3f38b6c803f i386/debug/ghostscript-debuginfo-8.15.3-2.fc6.i386.rpm 5b9e5157d34d40da4753269fa3593884937b62c1 i386/ghostscript-gtk-8.15.3-2.fc6.i386.rpm ee97b3e4fc3341e6eae844c6103cdd436a715a0d i386/ghostscript-devel-8.15.3-2.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Fri Jan 12 19:40:32 2007 From: twaugh at redhat.com (Tim Waugh) Date: Fri, 12 Jan 2007 14:40:32 -0500 Subject: Fedora Core 6 Test Update: system-config-printer-0.7.47-1.fc6 Message-ID: <200701121940.l0CJeWB9023076@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-022 2007-01-12 --------------------------------------------------------------------- Product : Fedora Core 6 Name : system-config-printer Version : 0.7.47 Release : 1.fc6 Summary : A printer administration tool Description : system-config-printer is a graphical user interface that allows the user to configure a CUPS print server. --------------------------------------------------------------------- Update Information: Bug fix update for "wrong page size" problem, incorrect missing driver check, and some minor text problems. --------------------------------------------------------------------- * Fri Jan 12 2007 Tim Waugh 0.7.47-1 - 0.7.47: - Fixed minor text bugs (bug #177433). - Handle shell builtins in the driver check (bug #222413). * Mon Jan 8 2007 Tim Waugh 0.7.46-1 - 0.7.46: - Fixed page size problem (bug #221702). - Added 'ro' to ALL_LINGUAS. * Wed Jan 3 2007 Tim Waugh 0.7.45-1 - Updated to pycups-1.9.17. - 0.7.45: - Fixed traceback in driver check. * Tue Jan 2 2007 Tim Waugh 0.7.44-1 - 0.7.44: - Fixed traceback in error display (bug #220136). - Preserve case in model string when dumping debug output. * Thu Dec 21 2006 Tim Waugh 0.7.43-1 - 0.7.43: - Don't check against IEEE 1284 DES field at all. - Merged device matching code (bug #219518). - Catch non-fatal errors when auto-matching device. - Fixed driver checking bug involving pipelines (bug #220347). - Show PPD errors (bug #220136). * Mon Dec 11 2006 Tim Waugh 0.7.42-1 - 0.7.42: - Fixed typo in command set matching code. - Case-insensitive matching when Device ID not known to database. * Thu Dec 7 2006 Tim Waugh 0.7.41-1 - Updated pycups to 1.9.16. - 0.7.41: - Reconnect smoothly after uploading new configuration. - Update lpoptions when setting default printer if it conflicts with the new setting (bug #217395). - Fixed typo in show_HTTP_Error (bug #217537). - Don't pre-select make and model when not discoverable for chosen device (bug #217518). - Set Forward button sensitive on Device screen in new-printer dialog (bug #217515). - Keep Server Settings selected after applying changes if it was selected before. - Set Connecting dialog transient for main window. - Center Connecting dialog on parent. - Optional 'reason' argument for cupshelpers.Printer.setEnabled. - Describe devices that have no optional parameters. * Thu Nov 30 2006 Tim Waugh - Provide pycups feature. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ bbcd6fbeec97c0c350c0d7d2157a83406158b81b SRPMS/system-config-printer-0.7.47-1.fc6.src.rpm bbcd6fbeec97c0c350c0d7d2157a83406158b81b noarch/system-config-printer-0.7.47-1.fc6.src.rpm 3554a2c194292b2613f64cb4c0f0cbb06fd4e995 ppc/system-config-printer-0.7.47-1.fc6.ppc.rpm 1eca1d173e3bb209844290eaf334d5617dfd698b ppc/debug/system-config-printer-debuginfo-0.7.47-1.fc6.ppc.rpm 9f4735fa07be07f49eea6483f939a11c0d13b4d4 ppc/system-config-printer-libs-0.7.47-1.fc6.ppc.rpm 6837bf3124032770087f55968eebfc0a69438917 x86_64/system-config-printer-libs-0.7.47-1.fc6.x86_64.rpm 7563534a093922f4db649f4b6eba73d426ce227d x86_64/debug/system-config-printer-debuginfo-0.7.47-1.fc6.x86_64.rpm 26d99704578e01b0d6a254cc5739b03f4486916b x86_64/system-config-printer-0.7.47-1.fc6.x86_64.rpm 14c04eaae366e1f19e0cca3e104ba6dcc267bc9a i386/debug/system-config-printer-debuginfo-0.7.47-1.fc6.i386.rpm 99e323642ddee20bd2e6aafdf6a334a68f0a8dd6 i386/system-config-printer-0.7.47-1.fc6.i386.rpm c965a76a38066d46a3aa47b04b58947c6e3e0a3c i386/system-config-printer-libs-0.7.47-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Fri Jan 12 19:41:41 2007 From: twaugh at redhat.com (Tim Waugh) Date: Fri, 12 Jan 2007 14:41:41 -0500 Subject: Fedora Core 6 Test Update: cups-1.2.7-1.7.fc6 Message-ID: <200701121941.l0CJff4H023383@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-023 2007-01-12 --------------------------------------------------------------------- Product : Fedora Core 6 Name : cups Version : 1.2.7 Release : 1.7.fc6 Summary : Common Unix Printing System Description : The Common UNIX Printing System provides a portable printing layer for UNIX?? operating systems. It has been developed by Easy Software Products to promote a standard printing solution for all UNIX vendors and users. CUPS provides the System V and Berkeley command-line interfaces. --------------------------------------------------------------------- Update Information: Bug fix update to resolve busy loop in ipp backend. Also resolves a problem with logrotate causing repeated jobs. --------------------------------------------------------------------- * Fri Jan 12 2007 Tim Waugh 1:1.2.7-1.7 - Don't even reload CUPS when rotating logs (bug #215024). * Wed Jan 3 2007 Tim Waugh 1:1.2.7-1.6 - Applied upstream patch to avoid busy loop in client (STR #2179, bug #219330). * Fri Dec 8 2006 Tim Waugh - Requires tmpwatch for the cron.daily script (bug #218901). * Thu Dec 7 2006 Tim Waugh 1:1.2.7-1.5 - Use upstream patch for STR #2121. - Fixed If-Modified-Since: handling in libcups (bug #217556, STR #2133). - Fixed extra EOF in pstops output (bug #216154, STR #2111). * Tue Nov 28 2006 Tim Waugh - Ship an lpoptions file so it picks up the right SELinux file context. * Mon Nov 27 2006 Tim Waugh 1:1.2.7-1.4 - Better LSPP fix for bug #216855. * Thu Nov 23 2006 Tim Waugh - Use translated string for password prompt (STR #2121). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ bd748361c16efaa2bb87f4757ae026ff0b971570 SRPMS/cups-1.2.7-1.7.fc6.src.rpm bd748361c16efaa2bb87f4757ae026ff0b971570 noarch/cups-1.2.7-1.7.fc6.src.rpm a1936ab7193e22c026a0c30a4cbbc0cdbcebc290 ppc/cups-libs-1.2.7-1.7.fc6.ppc.rpm 45449375c7003eb26110d29ed57ee5c1e984f40b ppc/cups-devel-1.2.7-1.7.fc6.ppc.rpm 66653a25c13c4014d2af66447611890a4c2a384a ppc/cups-lpd-1.2.7-1.7.fc6.ppc.rpm 10272ee6e7c8b202b3789e0c6c6017f865feb1d5 ppc/debug/cups-debuginfo-1.2.7-1.7.fc6.ppc.rpm 3fe5a0797cd2d8e40e52f96e1e3991b88f4fa947 ppc/cups-1.2.7-1.7.fc6.ppc.rpm a098f6ba037c4975d70ba82c2010cfd284a4f691 x86_64/cups-lpd-1.2.7-1.7.fc6.x86_64.rpm 9d9cfdb84c9599f523f9ae51bd61cf7bee501103 x86_64/cups-libs-1.2.7-1.7.fc6.x86_64.rpm f2c9ab2c3a01860635a5c00caa5bfcaca455548a x86_64/cups-1.2.7-1.7.fc6.x86_64.rpm 1967827c2ec6ca9678639332ecdb70a46facadf6 x86_64/cups-devel-1.2.7-1.7.fc6.x86_64.rpm 8d1104e7693531ff7a8ef0c4d001ea1caba708f8 x86_64/debug/cups-debuginfo-1.2.7-1.7.fc6.x86_64.rpm c886d3cb0f62bc9e87c4a09c977c5f121f1db906 i386/debug/cups-debuginfo-1.2.7-1.7.fc6.i386.rpm 4b47bd0b0092af0703201cbec41735187f5f34c8 i386/cups-1.2.7-1.7.fc6.i386.rpm 37be7354ee169cc2dc913a0d7c968691aa57d1a5 i386/cups-libs-1.2.7-1.7.fc6.i386.rpm e4c4188f51718ecba58e379e69974c219d8ac62b i386/cups-devel-1.2.7-1.7.fc6.i386.rpm d1cd4b1a4379be22b1ccf86aa4eb820b96d4a639 i386/cups-lpd-1.2.7-1.7.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From paul at all-the-johnsons.co.uk Fri Jan 12 20:47:32 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Fri, 12 Jan 2007 20:47:32 +0000 Subject: saa7130 video card problem Message-ID: <1168634852.3306.6.camel@T7.Linux> Hi, I've just replaced my Pinaccle card with a SAA7130 card. The system has recognised the card, but tvtime is giving absolutely nothing out -just a black screen. When I right click to set things up, I get a video card called "default" but am unable to do a channel scan or anything like that. dmesg comes up with Linux version 2.6.19-1.2911.fc7 Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.14 loaded ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 saa7130[0]: found at 0000:02:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xf700c000 saa7130[0]: subsystem: 1301:2001, board: UNKNOWN/GENERIC [card=0,autodetected] saa7130[0]: board init: gpio is 0 saa7130[0]: i2c eeprom 00: 01 13 01 20 08 20 1c 55 43 43 a9 1c 55 43 43 a9 saa7130[0]: i2c eeprom 10: ff ff 00 00 ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c scan: found device @ 0xa0 [eeprom] saa7130[0]: i2c scan: found device @ 0xc0 [tuner (analog)] saa7130[0]: i2c scan: found device @ 0xc2 [???] saa7130[0]: registered device video0 [v4l2] saa7130[0]: registered device vbi0 ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.19-1.2911.fc7 #1 ------------------------------------------------------- tvtime/3389 is trying to acquire lock: (&mm->mmap_sem){----}, at: [] videobuf_dma_init_user +0xcd/0x174 [video_buf] but task is already holding lock: (&q->lock#2){--..}, at: [] mutex_lock+0x2a/0x2e which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&q->lock#2){--..}: [] __lock_acquire+0x90e/0xa50 [] lock_acquire+0x4c/0x65 [] mutex_lock+0x2a/0x2e [] __mutex_lock_slowpath+0xef/0x279 [] do_mmap_pgoff+0x44a/0x7e9 [] mutex_lock+0x2a/0x2e [] videobuf_mmap_mapper+0x1c/0x23c [video_buf] [] video_mmap+0x35/0x37 [saa7134] [] do_mmap_pgoff+0x4ec/0x7e9 [] trace_hardirqs_on+0x11a/0x13e [] sys_mmap+0x90/0x119 [] tracesys+0xdc/0xe1 [] 0xffffffffffffffff -> #0 (&mm->mmap_sem){----}: [] __lock_acquire+0x820/0xa50 [] lock_acquire+0x4c/0x65 [] videobuf_dma_init_user+0xcd/0x174 [video_buf] [] down_read+0x3e/0x4a [] videobuf_dma_init_user+0xcd/0x174 [video_buf] [] videobuf_dma_free+0x7a/0xa3 [video_buf] [] videobuf_iolock+0x86/0xd5 [video_buf] [] buffer_prepare+0x194/0x206 [saa7134] [] videobuf_qbuf+0x242/0x2ef [video_buf] [] video_do_ioctl+0xdeb/0xf5d [saa7134] [] avc_has_perm+0x49/0x5b [] video_usercopy+0x1d1/0x2a9 [videodev] [] prio_tree_insert+0x18c/0x231 [] video_do_ioctl+0x0/0xf5d [saa7134] [] video_ioctl+0x10/0x12 [saa7134] [] do_ioctl+0x5e/0x77 [] vfs_ioctl+0x260/0x27d [] sys_ioctl+0x5f/0x82 [] tracesys+0xdc/0xe1 [] 0xffffffffffffffff other info that might help us debug this: 1 lock held by tvtime/3389: #0: (&q->lock#2){--..}, at: [] mutex_lock+0x2a/0x2e stack backtrace: Call Trace: [] print_circular_bug_tail+0x70/0x7b [] __lock_acquire+0x820/0xa50 [] lock_acquire+0x4c/0x65 [] :video_buf:videobuf_dma_init_user+0xcd/0x174 [] down_read+0x3e/0x4a [] :video_buf:videobuf_dma_init_user+0xcd/0x174 [] :video_buf:videobuf_dma_free+0x7a/0xa3 [] :video_buf:videobuf_iolock+0x86/0xd5 [] :saa7134:buffer_prepare+0x194/0x206 [] :video_buf:videobuf_qbuf+0x242/0x2ef [] :saa7134:video_do_ioctl+0xdeb/0xf5d [] avc_has_perm+0x49/0x5b [] :videodev:video_usercopy+0x1d1/0x2a9 [] prio_tree_insert+0x18c/0x231 [] :saa7134:video_do_ioctl+0x0/0xf5d [] :saa7134:video_ioctl+0x10/0x12 [] do_ioctl+0x5e/0x77 [] vfs_ioctl+0x260/0x27d [] sys_ioctl+0x5f/0x82 [] tracesys+0xdc/0xe1 Any help on setting this up would help! I am not sure if the above is a tvtime problem or a kernel problem. TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From deji_aking at yahoo.ca Fri Jan 12 23:25:49 2007 From: deji_aking at yahoo.ca (Deji Akingunola) Date: Fri, 12 Jan 2007 18:25:49 -0500 Subject: saa7130 video card problem In-Reply-To: <1168634852.3306.6.camel@T7.Linux> References: <1168634852.3306.6.camel@T7.Linux> Message-ID: <45A818FD.8020003@yahoo.ca> Paul wrote: > Hi, > > I've just replaced my Pinaccle card with a SAA7130 card. The system has > recognised the card, but tvtime is giving absolutely nothing out -just a > black screen. > > ... > ======================================================= > [ INFO: possible circular locking dependency detected ] > 2.6.19-1.2911.fc7 #1 > ------------------------------------------------------- > tvtime/3389 is trying to acquire lock: > (&mm->mmap_sem){----}, at: [] videobuf_dma_init_user > +0xcd/0x174 [video_buf] > That's https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=202604. Do you have other kernels installed? Similar card (on the same system that produced the above bug) works on kernels up to 2.6.19-1.2904.fc7, have not tested with newer kernels. Deji __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From poelstra at redhat.com Sat Jan 13 01:52:11 2007 From: poelstra at redhat.com (John Poelstra) Date: Fri, 12 Jan 2007 17:52:11 -0800 Subject: update to Testing page on Fedora wiki Message-ID: <45A83B4B.5010307@redhat.com> What is the proper etiquette for proposing or making large changes to an existing wiki page? I have been studying this page: http://fedoraproject.org/wiki/Testing There is a lot of helpful information here, however I think it would be easier to consume, particularly for newbies, if it was reworked into 2 or 3 smaller pages. I would also propose a separate page dedicated to installing rawhide. I am volunteering to make the changes, what are the next steps I should take? :) Thanks, John From sundaram at fedoraproject.org Sat Jan 13 01:51:43 2007 From: sundaram at fedoraproject.org (Rahul Sundaram) Date: Sat, 13 Jan 2007 07:21:43 +0530 Subject: update to Testing page on Fedora wiki In-Reply-To: <45A83B4B.5010307@redhat.com> References: <45A83B4B.5010307@redhat.com> Message-ID: <45A83B2F.7010304@fedoraproject.org> John Poelstra wrote: > What is the proper etiquette for proposing or making large changes to an > existing wiki page? > > I have been studying this page: http://fedoraproject.org/wiki/Testing > > There is a lot of helpful information here, however I think it would be > easier to consume, particularly for newbies, if it was reworked into 2 > or 3 smaller pages. I would also propose a separate page dedicated to > installing rawhide. > I am volunteering to make the changes, what are the next steps I should > take? :) It would be easier for many people watching the page if you copy and make the changes in your wiki space and then copy the edits back in one go. Rahul From buildsys at redhat.com Sat Jan 13 10:37:54 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sat, 13 Jan 2007 05:37:54 -0500 Subject: rawhide report: 20070113 changes Message-ID: <200701131037.l0DAbs0X009196@hs20-bc2-6.build.redhat.com> New package ConsoleKit System daemon for tracking users, sessions and seats Updated Packages: cups-1:1.2.7-7.fc7 ------------------ * Fri Jan 12 2007 Tim Waugh 1:1.2.7-7 - Don't even reload CUPS when rotating logs (bug #215024). * Fri Dec 08 2006 Tim Waugh - Requires tmpwatch for the cron.daily script (bug #218901). device-mapper-1.02.14-2.fc7 --------------------------- * Fri Jan 12 2007 Alasdair Kergon - 1.02.14-2 - Rebuild. * Thu Jan 11 2007 Alasdair Kergon - 1.02.14-1 - Use CFLAGS when linking so mixed sparc builds can supply -m64. - Export dm_basename() and dm_tree_use_no_flush_suspend(). - Cope with a trailing space when comparing tables prior to possible reload. * Tue Nov 28 2006 Alasdair Kergon - 1.02.13-1 - Update dmsetup man page (setgeometry & message). - Suppress encryption key in 'dmsetup table' output unless --showkeys supplied. eclipse-1:3.2.1-30.fc7 ---------------------- * Fri Jan 12 2007 Ben Konrath 3.2.1-30 - Fix %postun problem in the sdk sub-package. * Thu Jan 11 2007 Ben Konrath 3.2.1-29 - Remove SWT JNI symlinks from %{libdir}. * Wed Jan 10 2007 Ben Konrath 3.2.1-28 - Rpmlint cleanups. fontconfig-2.4.2-2.fc7 ---------------------- * Fri Jan 12 2007 Behdad Esfahbod - 2.4.2-2 - Change /usr/share/X11/fonts/OTF to /usr/share/X11/fonts/TTF - Resolves: #220809 gawk-3.1.5-13.fc7 ----------------- * Fri Jan 12 2007 Karel Zak 3.1.5-13 - improve freewstr patch gdb-6.5-25.fc7 -------------- * Fri Jan 12 2007 Jan Kratochvil - 6.5-25 - Fix unwinding of non-CFI (w/o debuginfo) PPC code by recent GCC (BZ 140532). ghostscript-8.15.3-4.fc7 ------------------------ * Fri Jan 12 2007 Tim Waugh 8.15.3-4 - Own cjkv directory (bug #221380, bug #222375). * Tue Dec 05 2006 Tim Waugh 8.15.3-3 - Added split-cidfnmap patch (bug #194592). * Thu Nov 16 2006 Tim Waugh 8.15.3-2 - 8.15.3. No longer need gtk2, ps2epsi, badc, pagesize, use-external-freetype, split-font-configuration or cjkv patches. - Renumbered patches. gphoto2-2.3.1-2.fc7 ------------------- * Thu Jan 11 2007 Jindrich Novy 2.3.1-2 - really fix the gphoto2-devel multilib conflict (#205211) jpackage-utils-0:1.7.3-1jpp.2.fc7 --------------------------------- * Thu Jan 11 2007 Thomas Fitzsimmons - 0:1.7.3-1jpp.2.fc7 - Add 1.6.0 directories missed in merge. - Resolves: rhbz#221262 libdhcp-1.19-1.fc7 ------------------ * Fri Jan 12 2007 David Cantrell - 1.19-1 - Catch return value of asprintf() in ifxDHCPv6() and ifxDHCPv4() * Thu Jan 11 2007 David Cantrell - 1.18-1 - Set IFF_UP and IFF_RUNNING flags on interface before trying to get a DHCP lease. Fixes a problem with DHCP failing in anaconda using 2.6.19 and higher kernels (#221392). * Fri Oct 27 2006 David Cantrell - 1.17-1 - Replace enum dhcp_state_e in libdhcp.h with the actual typedef libselinux-1.33.4-2.fc7 ----------------------- * Fri Jan 12 2007 Dan Walsh - 1.33.4-2 - Add reference to selinux man page in all man pages to make apropos work Resolves: # 217881 * Thu Jan 11 2007 Dan Walsh - 1.33.4-1 - Upstream wanted some minor changes, upgrading to keep api the same - Upgrade to upstream * Merged selinux_check_securetty_context() and support from Dan Walsh. Resolves: #200110 man-pages-2.43-3.fc7 -------------------- * Fri Jan 12 2007 Ivana Varekova 2.43-3 - fix mmap2 man page - spec file cleanup * Fri Dec 08 2006 Ivana Varekova 2.43-2 - remove old/wrong patches - fix tgkill/tkill man pages inconsistency * Fri Dec 01 2006 Ivana Varekova 2.43-1 - update to 2.43 - fix mount.2 man page (#211608) numactl-0.9.8-2.fc7 ------------------- * Fri Jan 12 2007 Neil Horman - 0.9.8-2.fc7 - Properly fixed bz 221982 - Updated revision string to include .fc7 parted-1.8.2-1.fc7 ------------------ * Fri Jan 12 2007 David Cantrell - 1.8.2-1 - Upgrade to GNU parted-1.8.2 policycoreutils-1.33.12-2.fc7 ----------------------------- * Fri Jan 12 2007 Dan Walsh 1.33.12-2 - Update man pages by adding SELinux to header to fix apropos database Resolves: #217881 postgresql-8.2.1-2.fc7 ---------------------- * Fri Jan 12 2007 Tom Lane 8.2.1-2 - Split -pl subpackage into three new packages to reduce dependencies and track upstream project's packaging. pyparted-1.8.3-1.fc7 -------------------- * Fri Jan 12 2007 David Cantrell - 1.8.3-1 - Required parted-1.8.2 or higher setarch-2.0-3.fc7 ----------------- * Fri Jan 12 2007 Jindrich Novy 2.0-3 - add sparc32bash alias to keep compatibility with sparc32 which is obsoleted by setarch for some time (#221976), thanks to Dennis Gilmore stardict-2.4.8-1.fc7 -------------------- * Fri Jan 12 2007 Mayank Jain - Added perl-XML-Parser as BuildRequires * Thu Jan 11 2007 Mayank Jain * Thu Jan 11 2007 Mayank Jain - Updated to version 2.4.8 - Removed invalid patch - stardict-2.4.5-invalid-cplusplus.patch - Reset release number to 2.4.8-1 - Added dist-tag to the release version directive system-config-printer-0.7.47-1.fc7 ---------------------------------- * Fri Jan 12 2007 Tim Waugh 0.7.47-1 - 0.7.47: - Fixed minor text bugs (bug #177433). - Handle shell builtins in the driver check (bug #222413). system-config-securitylevel-1.7.0-1.fc7 --------------------------------------- * Fri Jan 12 2007 Chris Lumens 1.7.0-1 - Change .desktop file (#218925). - Make iptables default FORWARD rule REJECT (#221828). - Correct F12 behavior on main page (#221942). - Disable IPv6 firewall when asked to (#221942). - Support adding a user-specified custom firewall rules file that gets included after the defaults (#138143). vixie-cron-4:4.1-69.fc7 ----------------------- * Wed Jan 10 2007 Marcela Maslanova - 4:4.1-69 - patch from bz - Cron does not detect changed symlink - rhbz#221856 Broken deps for ia64 ---------------------------------------------------------- mkinitrd - 6.0.6-1.ia64 requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.ia64 requires libparted-1.8.so.0()(64bit) Broken deps for i386 ---------------------------------------------------------- mkinitrd - 6.0.6-1.i386 requires libparted-1.8.so.0 nash - 6.0.6-1.i386 requires libparted-1.8.so.0 Broken deps for x86_64 ---------------------------------------------------------- mkinitrd - 6.0.6-1.x86_64 requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.x86_64 requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.i386 requires libparted-1.8.so.0 Broken deps for ppc64 ---------------------------------------------------------- mkinitrd - 6.0.6-1.ppc64 requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.ppc64 requires libparted-1.8.so.0()(64bit) Broken deps for ppc ---------------------------------------------------------- mkinitrd - 6.0.6-1.ppc requires libparted-1.8.so.0 nash - 6.0.6-1.ppc requires libparted-1.8.so.0 Broken deps for s390 ---------------------------------------------------------- mkinitrd - 6.0.6-1.s390 requires libparted-1.8.so.0 nash - 6.0.6-1.s390 requires libparted-1.8.so.0 systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 Broken deps for s390x ---------------------------------------------------------- mkinitrd - 6.0.6-1.s390x requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.s390x requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.s390 requires libparted-1.8.so.0 From drago01 at gmail.com Sat Jan 13 11:23:07 2007 From: drago01 at gmail.com (dragoran) Date: Sat, 13 Jan 2007 12:23:07 +0100 Subject: rawhide install fails (anaconda crash) Message-ID: <45A8C11B.9060808@gmail.com> I tyred a rawhide ftp install today but after downloading stage2.img it crashes with: (hand copied) File "/usr/bin/anaconda", line 574 in import signal, traceback, string, isys, iutil, time File "/usr/lib/anacoda/iutil.py", line 19, in import rhplx File "/usr/lib/python2.5/site-packages/rhpl/__init__.py", line 41 'PS3PF' : 'PS3' SyntaxError: inavlid syntax install aborted abnormally [1/1] seems like the problem is not exactly in anaconda but in rhpl From ddmbox2 at yahoo.co.uk Sat Jan 13 12:31:02 2007 From: ddmbox2 at yahoo.co.uk (dexter) Date: Sat, 13 Jan 2007 12:31:02 +0000 Subject: rawhide install fails (anaconda crash) In-Reply-To: <45A8C11B.9060808@gmail.com> References: <45A8C11B.9060808@gmail.com> Message-ID: <200701131231.02615.ddmbox2@yahoo.co.uk> On Sat January 13 2007 11:23, dragoran wrote: > I tyred a rawhide ftp install today but after downloading stage2.img it > crashes with: > (hand copied) > File "/usr/bin/anaconda", line 574 in > import signal, traceback, string, isys, iutil, time > File "/usr/lib/anacoda/iutil.py", line 19, in > import rhplx > File "/usr/lib/python2.5/site-packages/rhpl/__init__.py", line 41 > 'PS3PF' : 'PS3' > SyntaxError: inavlid syntax > install aborted abnormally [1/1] > > seems like the problem is not exactly in anaconda but in rhpl Correct :-) I've just hit this bug in 221850 its a trivial fix of a comma missing on the end of line 40 from /usr/lib/python2.5/site-packages/rhpl/__init__.py rhpl-0.200-1.rpm ...dex ___________________________________________________________ Copy addresses and emails from any email account to Yahoo! Mail - quick, easy and free. http://uk.docs.yahoo.com/trueswitch2.html From buildsys at redhat.com Sat Jan 13 17:47:36 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sat, 13 Jan 2007 12:47:36 -0500 Subject: rawhide report: 20070113 changes Message-ID: <200701131747.l0DHlaoe011614@hs20-bc2-6.build.redhat.com> New package ConsoleKit System daemon for tracking users, sessions and seats Updated Packages: cups-1:1.2.7-7.fc7 ------------------ * Fri Jan 12 2007 Tim Waugh 1:1.2.7-7 - Don't even reload CUPS when rotating logs (bug #215024). * Fri Dec 08 2006 Tim Waugh - Requires tmpwatch for the cron.daily script (bug #218901). device-mapper-1.02.14-2.fc7 --------------------------- * Fri Jan 12 2007 Alasdair Kergon - 1.02.14-2 - Rebuild. * Thu Jan 11 2007 Alasdair Kergon - 1.02.14-1 - Use CFLAGS when linking so mixed sparc builds can supply -m64. - Export dm_basename() and dm_tree_use_no_flush_suspend(). - Cope with a trailing space when comparing tables prior to possible reload. * Tue Nov 28 2006 Alasdair Kergon - 1.02.13-1 - Update dmsetup man page (setgeometry & message). - Suppress encryption key in 'dmsetup table' output unless --showkeys supplied. eclipse-1:3.2.1-30.fc7 ---------------------- * Fri Jan 12 2007 Ben Konrath 3.2.1-30 - Fix %postun problem in the sdk sub-package. * Thu Jan 11 2007 Ben Konrath 3.2.1-29 - Remove SWT JNI symlinks from %{libdir}. * Wed Jan 10 2007 Ben Konrath 3.2.1-28 - Rpmlint cleanups. fontconfig-2.4.2-2.fc7 ---------------------- * Fri Jan 12 2007 Behdad Esfahbod - 2.4.2-2 - Change /usr/share/X11/fonts/OTF to /usr/share/X11/fonts/TTF - Resolves: #220809 gawk-3.1.5-13.fc7 ----------------- * Fri Jan 12 2007 Karel Zak 3.1.5-13 - improve freewstr patch gdb-6.5-26.fc7 -------------- * Sat Jan 13 2007 Jan Kratochvil - 6.5-26 - Fix unwinding of non-debug (.eh_frame) PPC code, Andreas Schwab (BZ 140532). - Fix unwinding of debug (.debug_frame) PPC code, workaround GCC (BZ 140532). - Fix missing testsuite .log output of testcases using get_compiler_info(). * Fri Jan 12 2007 Jan Kratochvil - 6.5-25 - Fix unwinding of non-CFI (w/o debuginfo) PPC code by recent GCC (BZ 140532). ghostscript-8.15.3-4.fc7 ------------------------ * Fri Jan 12 2007 Tim Waugh 8.15.3-4 - Own cjkv directory (bug #221380, bug #222375). * Tue Dec 05 2006 Tim Waugh 8.15.3-3 - Added split-cidfnmap patch (bug #194592). * Thu Nov 16 2006 Tim Waugh 8.15.3-2 - 8.15.3. No longer need gtk2, ps2epsi, badc, pagesize, use-external-freetype, split-font-configuration or cjkv patches. - Renumbered patches. gphoto2-2.3.1-2.fc7 ------------------- * Thu Jan 11 2007 Jindrich Novy 2.3.1-2 - really fix the gphoto2-devel multilib conflict (#205211) jpackage-utils-0:1.7.3-1jpp.2.fc7 --------------------------------- * Thu Jan 11 2007 Thomas Fitzsimmons - 0:1.7.3-1jpp.2.fc7 - Add 1.6.0 directories missed in merge. - Resolves: rhbz#221262 libdhcp-1.19-1.fc7 ------------------ * Fri Jan 12 2007 David Cantrell - 1.19-1 - Catch return value of asprintf() in ifxDHCPv6() and ifxDHCPv4() * Thu Jan 11 2007 David Cantrell - 1.18-1 - Set IFF_UP and IFF_RUNNING flags on interface before trying to get a DHCP lease. Fixes a problem with DHCP failing in anaconda using 2.6.19 and higher kernels (#221392). * Fri Oct 27 2006 David Cantrell - 1.17-1 - Replace enum dhcp_state_e in libdhcp.h with the actual typedef libselinux-1.33.4-2.fc7 ----------------------- * Fri Jan 12 2007 Dan Walsh - 1.33.4-2 - Add reference to selinux man page in all man pages to make apropos work Resolves: # 217881 * Thu Jan 11 2007 Dan Walsh - 1.33.4-1 - Upstream wanted some minor changes, upgrading to keep api the same - Upgrade to upstream * Merged selinux_check_securetty_context() and support from Dan Walsh. Resolves: #200110 man-pages-2.43-3.fc7 -------------------- * Fri Jan 12 2007 Ivana Varekova 2.43-3 - fix mmap2 man page - spec file cleanup * Fri Dec 08 2006 Ivana Varekova 2.43-2 - remove old/wrong patches - fix tgkill/tkill man pages inconsistency * Fri Dec 01 2006 Ivana Varekova 2.43-1 - update to 2.43 - fix mount.2 man page (#211608) numactl-0.9.8-2.fc7 ------------------- * Fri Jan 12 2007 Neil Horman - 0.9.8-2.fc7 - Properly fixed bz 221982 - Updated revision string to include .fc7 policycoreutils-1.33.12-2.fc7 ----------------------------- * Fri Jan 12 2007 Dan Walsh 1.33.12-2 - Update man pages by adding SELinux to header to fix apropos database Resolves: #217881 postgresql-8.2.1-2.fc7 ---------------------- * Fri Jan 12 2007 Tom Lane 8.2.1-2 - Split -pl subpackage into three new packages to reduce dependencies and track upstream project's packaging. rhpl-0.201-2 ------------ * Sat Jan 13 2007 Jesse Keating - 0.201-2 - rebuild in correct collection * Fri Jan 12 2007 Chris Llumens - 0.201-1 - Fix traceback. setarch-2.0-3.fc7 ----------------- * Fri Jan 12 2007 Jindrich Novy 2.0-3 - add sparc32bash alias to keep compatibility with sparc32 which is obsoleted by setarch for some time (#221976), thanks to Dennis Gilmore stardict-2.4.8-1.fc7 -------------------- * Fri Jan 12 2007 Mayank Jain - Added perl-XML-Parser as BuildRequires * Thu Jan 11 2007 Mayank Jain * Thu Jan 11 2007 Mayank Jain - Updated to version 2.4.8 - Removed invalid patch - stardict-2.4.5-invalid-cplusplus.patch - Reset release number to 2.4.8-1 - Added dist-tag to the release version directive system-config-printer-0.7.47-1.fc7 ---------------------------------- * Fri Jan 12 2007 Tim Waugh 0.7.47-1 - 0.7.47: - Fixed minor text bugs (bug #177433). - Handle shell builtins in the driver check (bug #222413). system-config-securitylevel-1.7.0-1.fc7 --------------------------------------- * Fri Jan 12 2007 Chris Lumens 1.7.0-1 - Change .desktop file (#218925). - Make iptables default FORWARD rule REJECT (#221828). - Correct F12 behavior on main page (#221942). - Disable IPv6 firewall when asked to (#221942). - Support adding a user-specified custom firewall rules file that gets included after the defaults (#138143). vixie-cron-4:4.1-69.fc7 ----------------------- * Wed Jan 10 2007 Marcela Maslanova - 4:4.1-69 - patch from bz - Cron does not detect changed symlink - rhbz#221856 Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From buildsys at redhat.com Sun Jan 14 11:04:47 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sun, 14 Jan 2007 06:04:47 -0500 Subject: rawhide report: 20070114 changes Message-ID: <200701141104.l0EB4lA4005800@hs20-bc2-6.build.redhat.com> Updated Packages: gdm-1:2.17.5-2.fc7 ------------------ * Sat Jan 13 2007 Matthias Clasen - 1:2.17.5-2 - Enable ConsoleKit support gnome-panel-2.16.2-2.fc7 ------------------------ * Sun Jan 14 2007 Matthias Clasen - 2.16.2-2 - Check for the right tracker desktop file Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From sebenste at weather.admin.niu.edu Sun Jan 14 19:40:35 2007 From: sebenste at weather.admin.niu.edu (Gilbert Sebenste) Date: Sun, 14 Jan 2007 13:40:35 -0600 (CST) Subject: Updated kernel for FC5? Message-ID: Hello Dave J. et al, OK, that's cool that FC6 got the update. Can we expect one for FC5? Just a simple yes/no will be more than adequate. Many thanks and keep up the great work! ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** ******************************************************************************* From jkeating at redhat.com Sun Jan 14 23:29:45 2007 From: jkeating at redhat.com (Jesse Keating) Date: Sun, 14 Jan 2007 18:29:45 -0500 Subject: Fedora Core 6 Test Update: yum-3.0.3-1.fc6 In-Reply-To: <200701081903.l08J3LxG010390@int-mx1.corp.redhat.com> References: <200701081903.l08J3LxG010390@int-mx1.corp.redhat.com> Message-ID: <200701141829.50219.jkeating@redhat.com> On Monday 08 January 2007 14:03, Jeremy Katz wrote: > Update Information: > > This update fixes a number of bugs in yum. > --------------------------------------------------------------------- > * Mon Jan ?8 2007 Jeremy Katz - 3.0.3-1 > - update to 3.0.3 (#221622, #221470, #220953) I've been doing some testing with this. I've used it to compose a tree, with it in the tree. Installation of said tree works as expected, no i586 kernel sneaking into my 686 systems. I've also tested it on other systems to do yum updates, and using pup to update. 221622 is fixed, no more groupinstall issues. 221470 is confirmed fixed as well. I'd vote this gets moved to final. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From dennis at ausil.us Sun Jan 14 23:46:25 2007 From: dennis at ausil.us (Dennis Gilmore) Date: Sun, 14 Jan 2007 17:46:25 -0600 Subject: Fedora Core 6 Test Update: yum-3.0.3-1.fc6 In-Reply-To: <200701141829.50219.jkeating@redhat.com> References: <200701081903.l08J3LxG010390@int-mx1.corp.redhat.com> <200701141829.50219.jkeating@redhat.com> Message-ID: <200701141746.26414.dennis@ausil.us> On Sunday 14 January 2007 5:29 pm, Jesse Keating wrote: > On Monday 08 January 2007 14:03, Jeremy Katz wrote: > > Update Information: > > > > This update fixes a number of bugs in yum. > > --------------------------------------------------------------------- > > * Mon Jan ?8 2007 Jeremy Katz - 3.0.3-1 > > - update to 3.0.3 (#221622, #221470, #220953) > > I've been doing some testing with this. I've used it to compose a tree, > with it in the tree. Installation of said tree works as expected, no i586 > kernel sneaking into my 686 systems. I've also tested it on other systems > to do yum updates, and using pup to update. spot reported that sparc installs installed sparc64 kernel on sparc64 systems instead of sparc. > 221622 is fixed, no more groupinstall issues. > > 221470 is confirmed fixed as well. > > I'd vote this gets moved to final. I would vote that it gets released also -- Dennis Gilmore, RHCE Proud Australian From lists at sapience.com Mon Jan 15 00:06:32 2007 From: lists at sapience.com (Mail List) Date: Sun, 14 Jan 2007 19:06:32 -0500 Subject: Fedora Core 6 Test Update: yum-3.0.3-1.fc6 In-Reply-To: <200701141829.50219.jkeating@redhat.com> References: <200701081903.l08J3LxG010390@int-mx1.corp.redhat.com> <200701141829.50219.jkeating@redhat.com> Message-ID: <200701141906.32089.lists@sapience.com> On Sunday 14 January 2007 18:29, Jesse Keating wrote: > On Monday 08 January 2007 14:03, Jeremy Katz wrote: > I'd vote this gets moved to final. ditto From deji_aking at yahoo.ca Mon Jan 15 00:56:15 2007 From: deji_aking at yahoo.ca (Deji Akingunola) Date: Sun, 14 Jan 2007 19:56:15 -0500 Subject: Fedora Core 6 Test Update: yum-3.0.3-1.fc6 In-Reply-To: <200701141829.50219.jkeating@redhat.com> References: <200701081903.l08J3LxG010390@int-mx1.corp.redhat.com> <200701141829.50219.jkeating@redhat.com> Message-ID: <45AAD12F.9010907@yahoo.ca> Jesse Keating wrote: > > 221622 is fixed, no more groupinstall issues. > > 221470 is confirmed fixed as well. > > I'd vote this gets moved to final. > > It'll be nice to have it in rawhide too. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From cra at WPI.EDU Mon Jan 15 01:24:51 2007 From: cra at WPI.EDU (Chuck Anderson) Date: Sun, 14 Jan 2007 20:24:51 -0500 Subject: Fedora Core 6 Test Update: gnome-applets-2.16.0.1-13.fc6 In-Reply-To: <200701111552.l0BFq5NL004313@int-mx1.corp.redhat.com> References: <200701111552.l0BFq5NL004313@int-mx1.corp.redhat.com> Message-ID: <20070115012451.GA23971@angus.ind.WPI.EDU> This update was bad news on my laptop. It totally hosed the GNOME desktop until I reverted to 2.16.0.1-12.fc6. None of the theme settings loaded, there was no panel, no desktop background, hot keys didn't work, window decorations were "default", etc. Instead, a dialog popped up: Power Manager GConf schema installer error. battery_low_percentage cannot be zero https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=222587 On Thu, Jan 11, 2007 at 10:52:05AM -0500, Raymond Strode wrote: > Name : gnome-applets > Version : 2.16.0.1 > Release : 13.fc6 > Summary : Small applications for the GNOME panel > Description : > GNOME (GNU Network Object Model Environment) is a user-friendly set of > applications and desktop tools to be used in conjunction with a window > manager for the X Window System. The gnome-applets package provides > small utilities for the GNOME panel. > > --------------------------------------------------------------------- > Update Information: > > This update should resolve an issure where some users are > getting an error dialog on login about the Null-Applet. > --------------------------------------------------------------------- > * Wed Jan 10 2007 Ray Strode - 1:2.16.0.1-13 > - fix null applet error on login for new users (bug 222104) > * Tue Dec 12 2006 Ray Strode - 1:2.16.0.1-12 > - fix mixer applet error on login for new users (bug 217919) > * Mon Nov 6 2006 Ray Strode - 1:2.16.0.1-11 > - s/verion/version/ in dbus-glib-devel build requires From jim at jbsys.com Mon Jan 15 02:53:45 2007 From: jim at jbsys.com (Jim Bevier) Date: Sun, 14 Jan 2007 19:53:45 -0700 Subject: final patch for pata disks on sata promise controller References: <459D86C2.4080006@jbsys.com> <20070105001831.GF17816@redhat.com> <004001c73674$6e7c3ad0$0a01a8c0@jbsys> Message-ID: <001801c73850$5fcb8120$0a01a8c0@jbsys> ----- Original Message ----- From: "Jim Bevier" To: "For testers of Fedora Core development releases" Cc: ; Sent: Friday, January 12, 2007 11:06 AM Subject: Re: patches for pata disks on sata promise controller > > ----- Original Message ----- > From: "Dave Jones" > To: "James C. Bevier" > Cc: ; > Sent: Thursday, January 04, 2007 5:18 PM > Subject: Re: patches for pata disks on sata promise controller > > >> On Thu, Jan 04, 2007 at 03:59:14PM -0700, James C. Bevier wrote: >> > Since the 2.4 kernel, I have had to patch sata_promise.c and libata.c >> > to >> > recognize pata disks. When the kernel was updated to 2.6.19, all of >> > the >> > patches were discarded. >> >> The 2.6.19 rebase is incomplete. This is why it isn't in updates-testing >> yet. >> Pretty much all the stuff that had conflicts get commented out for the >> time being. >> >> > Why were these patches not integrated upstream >> > over the last two years? >> >> I'll leave Jeff to answer that one. I know I'm tired of carrying it too. >> >> > Now the code has been redesigned by someone >> > (Jeff?) and the patches invalidated. Here is a first pass at the >> > patches for the 2.6.19 and beyond kernels. Dave, could you review the >> > patch and incorporate them into the next kernel rev? They seem to work >> > for me, but they needed to be tested with a system that has sata disks >> > to make sure I did not screw them up. Here is the patch and the diffs >> > for the spec file. >> >> Jeff, care to eyeball this? >> (Same diff James sent, but with some indentation fixes) >> >> Thanks, >> >> Dave >> >> >> old patch deleted................. >> > > Dave, > > Here is a revised patch for using pata drives on the sata_promise 2037x > controller. I took out some of the patch that was not getting executed. > This patch was tested with the 2909 kernel. I re-enabled the patch2200 > code > in the spec file to use this new patch. I sure would like to see this in > the next release of the kernel so it can be widely tested. This is a > replacement for the pre 2.6.19 patch that no longer works. It has been > two > years for the sata_promise patch, so you would think it should be main > stream by now. > > Jim > Dave, I found a couple of e-mails on the web from jeff at garzik.org signing off on sata_promise patches to gentoo users. It is slightly modified from the patch that I sent to you last week. I merged my mods with those and now have "the last" patch. This patch should allow pata disks on models 2037x and 2057x sata promise controllers. This should allow the same functionally as pre 2.6.19 kernels. I have tested it on the 2911 kernel. I am sorry Jeff chose to not include the gentoo patch in the current fedora libata releases. I have credited the gentoo people who generated the patch in the attached patch. How about including it in the next kernel release? Jim -------------- next part -------------- A non-text attachment was scrubbed... Name: linux-2.6.19-sata-promise-pata-ports.patch Type: application/octet-stream Size: 4837 bytes Desc: not available URL: From dtimms at iinet.net.au Mon Jan 15 10:36:54 2007 From: dtimms at iinet.net.au (David Timms) Date: Mon, 15 Jan 2007 21:36:54 +1100 Subject: ntp messed up; where I start? In-Reply-To: <20070109004323.GC21198@mail.harddata.com> References: <20070109004323.GC21198@mail.harddata.com> Message-ID: <45AB5946.9050101@iinet.net.au> Michal Jaegermann wrote: > On Mon, Jan 08, 2007 at 05:06:19PM -0500, sean wrote: >> ntp-4.2.2p4-2.fc7.x86_64 >> >> I set time and date this morning. Now at 16;45 local time, I >> show 23:09 on the computer. > > This is not likely ntp. Probably something is messing up your > clocks. Kernel is pickup up a clock which is broken? > When differences are too big then ntp is giving up. > > A quick check. Set clock correctly, do not start ntpd at all. > Is time sane after a while then? agreed, good place to start. I had a fast clock through most of fc5. I was able to find some bugzilla entries, but not a solution. It would get about 00:30:00 fast in 00:10:00 minutes. My understanding is once the {kernel} reads the hardware time at boot, it keeps track of it's own ticking. When you shutdown, it writes the current time back to hardware time. So if the kernel is running out of whack, then: - there is a kernel bug that should be reported - you can tell ntp that it is allowed to make large corrections to the time, and hence keep the free-running clock under control. One way is a machine within your network that doesn't have the problem. There is some kernel parameters that I forgot but try the kernel boot options acpi and timer=pmtimer { similar} to see if that helps. DaveT. From buildsys at redhat.com Mon Jan 15 11:11:23 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Mon, 15 Jan 2007 06:11:23 -0500 Subject: rawhide report: 20070115 changes Message-ID: <200701151111.l0FBBNnW012064@hs20-bc2-6.build.redhat.com> Updated Packages: autofs-1:5.0.1-0.rc3.7 ---------------------- * Mon Jan 15 2007 Ian Kent - 5.0.1-0.rc3.7 - ignore "winbind" if it appears in "automount" nsswitch.conf (bz 214632). glib2-2.12.8-1.fc7 ------------------ * Mon Jan 15 2007 Matthias Clasen - 2.12.8-1 - Update to 2.12.8 kernel-2.6.19-1.2912.fc7 ------------------------ * Sun Jan 14 2007 Roland McGrath - utrace update: PTRACE_TRACEME fix libgtop2-2.14.6-1.fc7 --------------------- * Sun Jan 14 2007 Matthias Clasen - 2.14.6-1 - Update to 2.14.6 shadow-utils-2:4.0.18.1-9.fc7 ----------------------------- * Sun Jan 14 2007 Peter Vrabec 2:4.0.18.1-9 - fix append option in usermod (#222540). squid-7:2.6.STABLE7-1.fc7 ------------------------- * Sun Jan 14 2007 Martin Stransky - 7:2.6.STABLE7-1 - update to the latest upstream Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From gilboad at gmail.com Mon Jan 15 11:27:52 2007 From: gilboad at gmail.com (Gilboa Davara) Date: Mon, 15 Jan 2007 13:27:52 +0200 Subject: Updated kernel for FC5? In-Reply-To: References: Message-ID: <1168860472.30273.12.camel@gilboa-work-dev.localdomain> On Sun, 2007-01-14 at 13:40 -0600, Gilbert Sebenste wrote: > Hello Dave J. et al, > > OK, that's cool that FC6 got the update. Can we expect one for FC5? > Just a simple yes/no will be more than adequate. Many thanks and keep up > the great work! ... One with a working mkinitrd, please? ;) [1] - Gilboa [1] https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=211030 From ikent at redhat.com Mon Jan 15 16:24:40 2007 From: ikent at redhat.com (Ian Kent) Date: Mon, 15 Jan 2007 11:24:40 -0500 Subject: Fedora Core 6 Test Update: autofs-5.0.1-0.rc3.6 Message-ID: <200701151624.l0FGOewN009272@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-076 2007-01-15 --------------------------------------------------------------------- Product : Fedora Core 6 Name : autofs Version : 5.0.1 Release : 0.rc3.6 Summary : A tool for automatically mounting and unmounting filesystems Description : autofs is a daemon which automatically mounts filesystems when you use them, and unmounts them later when you are not using them. This can include network filesystems, CD-ROMs, floppies, and so forth. --------------------------------------------------------------------- * Mon Jan 15 2007 Ian Kent - 5.0.1-0.rc3.6 - ignore "winbind" if it appears in "automount" nsswitch.conf (bz 214632). * Wed Jan 10 2007 Ian Kent - 5.0.1-0.rc3.4 - remove fullstop from Summary tag. - change Buildroot to recommended form. - replace Prereq with Requires. * Tue Jan 9 2007 Ian Kent - 5.0.1-0.rc3.2 - consolidate to rc3. - fix typo in Fix typo in var when removing temp directory (bz 221847). - remove redundant rpath link option. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ cf841d0e44ce3aeb1fbf324211df4347630671f0 SRPMS/autofs-5.0.1-0.rc3.6.src.rpm cf841d0e44ce3aeb1fbf324211df4347630671f0 noarch/autofs-5.0.1-0.rc3.6.src.rpm 9029402122d36d769477f588abc1d6995eb9be4e ppc/debug/autofs-debuginfo-5.0.1-0.rc3.6.ppc.rpm ae0d05ee5f3b72b1666cf126cd5f4b370de47487 ppc/autofs-5.0.1-0.rc3.6.ppc.rpm df174b49dd3a29ddb8e149245cc531a941152b6c x86_64/autofs-5.0.1-0.rc3.6.x86_64.rpm 96369a704f2e5180ddc19b6be3026130d7264ed5 x86_64/debug/autofs-debuginfo-5.0.1-0.rc3.6.x86_64.rpm c8db53113517a6462bc403499764e15c8ebb1f56 i386/autofs-5.0.1-0.rc3.6.i386.rpm 532994585e8933c027ecf917bc5b5ab843337701 i386/debug/autofs-debuginfo-5.0.1-0.rc3.6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From dwalsh at redhat.com Mon Jan 15 20:11:23 2007 From: dwalsh at redhat.com (Daniel Walsh) Date: Mon, 15 Jan 2007 15:11:23 -0500 Subject: Fedora Core 6 Test Update: libselinux-1.33.4-2.fc6 Message-ID: <200701152011.l0FKBN0n007028@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-081 2007-01-15 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libselinux Version : 1.33.4 Release : 2.fc6 Summary : SELinux library and simple utilities Description : Security-enhanced Linux is a feature of the Linux?? kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement??, Role-based Access Control, and Multi-level Security. libselinux provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. --------------------------------------------------------------------- * Fri Jan 12 2007 Dan Walsh - 1.33.4-2 - Add reference to selinux man page in all man pages to make apropos work Resolves: # 217881 * Thu Jan 11 2007 Dan Walsh - 1.33.4-1 - Upstream wanted some minor changes, upgrading to keep api the same - Upgrade to upstream * Merged selinux_check_securetty_context() and support from Dan Walsh. Resolves: #200110 * Fri Jan 5 2007 Dan Walsh - 1.33.3-3 - Cleanup patch * Fri Jan 5 2007 Dan Walsh - 1.33.3-2 - Add securetty handling Resolves: #200110 * Thu Jan 4 2007 Dan Walsh - 1.33.3-1 - Upgrade to upstream * Merged patch for matchpathcon utility to use file mode information when available from Dan Walsh. * Thu Dec 7 2006 Jeremy Katz - 1.33.2-4 - rebuild against python 2.5 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 1e22e131255a4a23be52cb429bc1064f794c953e SRPMS/libselinux-1.33.4-2.fc6.src.rpm 1e22e131255a4a23be52cb429bc1064f794c953e noarch/libselinux-1.33.4-2.fc6.src.rpm 315c1e9d04981c8567b5a171aca9e6447dc1022b ppc/libselinux-devel-1.33.4-2.fc6.ppc.rpm 91268d0fab10b6dcba26b477876f917cde9e80ad ppc/debug/libselinux-debuginfo-1.33.4-2.fc6.ppc.rpm 3b7f4f0d88285d7df74328668f12af314f52d838 ppc/libselinux-1.33.4-2.fc6.ppc.rpm bab987004eea3eb69e0c1acd184d0fbe651851ea ppc/libselinux-python-1.33.4-2.fc6.ppc.rpm 44a9bea2254c1409088beed285fed2b4268f79cd x86_64/libselinux-python-1.33.4-2.fc6.x86_64.rpm b391647f519cd0d0c2b1db3407824d028495bae7 x86_64/libselinux-1.33.4-2.fc6.x86_64.rpm a48af81bef79cb1f76bb00d0f0e487c70c4044ca x86_64/debug/libselinux-debuginfo-1.33.4-2.fc6.x86_64.rpm 07d84ecdd074bd5f19820e6b36451a1efb84fb60 x86_64/libselinux-devel-1.33.4-2.fc6.x86_64.rpm 63514912e7a04e05bac951406a77910d5b70227e i386/libselinux-devel-1.33.4-2.fc6.i386.rpm cd5ff6b1b79e5ccbca0ed4c6ecb236d3579ac1c9 i386/libselinux-python-1.33.4-2.fc6.i386.rpm f90fc726df0fd4eab46eea7e0b17d391dbb2ddfa i386/debug/libselinux-debuginfo-1.33.4-2.fc6.i386.rpm 56c7587b68c8078ec80a819b8dbcd0499c899d00 i386/libselinux-1.33.4-2.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From dwalsh at redhat.com Mon Jan 15 23:20:10 2007 From: dwalsh at redhat.com (Daniel Walsh) Date: Mon, 15 Jan 2007 18:20:10 -0500 Subject: Fedora Core 6 Test Update: selinux-policy-2.4.6-27.fc6 Message-ID: <200701152320.l0FNKAhB020984@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-082 2007-01-15 --------------------------------------------------------------------- Product : Fedora Core 6 Name : selinux-policy Version : 2.4.6 Release : 27.fc6 Summary : SELinux policy configuration Description : SELinux Reference Policy - modular. --------------------------------------------------------------------- * Mon Jan 15 2007 Dan Walsh 2.4.6-27 - Fix senmail avc trying to read /root - More fixes for ssh transitions to userspace Resolves: #221608 Resolves: #222548 * Fri Jan 12 2007 Dan Walsh 2.4.6-26 - automounter needs setuid - prelink needs to be able to rw_dir_perms on usr_t - pcscd_t needs to be able to search sysfs_t - Lots of fixes to run sshd under xinetd Resolves: #219999 * Wed Jan 10 2007 Dan Walsh 2.4.6-25 - Allow pcscd to use dac_search_override capability Resolves: #222064 * Mon Jan 8 2007 Dan Walsh 2.4.6-24 - Allow prelink when run from rpm to create tmp files Resolves: #221865 - Remove file_context for exportfs Resolves: #221181 - Allow spamassassin to create ~/.spamassissin Resolves: #203290 - Allow netlabel packets to flow. Resolves: #210426 * Fri Jan 5 2007 Dan Walsh 2.4.6-23 - Allow ssh access to the krb tickets - Allow sshd to change passwd - Stop newrole -l from working on non securetty Resolves: #200110 * Wed Jan 3 2007 Dan Walsh 2.4.6-22 - Fixes to run prelink in MLS machine Resolves: #221233 * Tue Jan 2 2007 Dan Walsh 2.4.6-21 - Allow spamassassin to read var_lib_t dir Resolves: #219234 * Fri Dec 29 2006 Dan Walsh 2.4.6-20 - fix mplayer to work under strict policy - Allow iptables to use nscd Resolves: #220794 * Thu Dec 28 2006 Dan Walsh 2.4.6-19 - Add gconf policy and make it work with strict * Sat Dec 23 2006 Dan Walsh 2.4.6-18 - Many fixes for strict policy and by extension mls. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ fe2a383839cd1b4a37daa2a35ced682de04ced23 SRPMS/selinux-policy-2.4.6-27.fc6.src.rpm fe2a383839cd1b4a37daa2a35ced682de04ced23 noarch/selinux-policy-2.4.6-27.fc6.src.rpm c5f31e278f22ded55497828d37107ab5a7fc5c35 ppc/selinux-policy-mls-2.4.6-27.fc6.noarch.rpm 357bfe85e1de46d4351fbe8f79e8233aeb659250 ppc/selinux-policy-devel-2.4.6-27.fc6.noarch.rpm 6e71a960e96be43d1e44a919aeb838047778d52f ppc/selinux-policy-targeted-2.4.6-27.fc6.noarch.rpm 04945d6a1e61c7fd0ca72abad5216694f127687c ppc/selinux-policy-2.4.6-27.fc6.noarch.rpm 2e1d62e4a77925af9fceecf7bf82294ce948ce99 ppc/selinux-policy-strict-2.4.6-27.fc6.noarch.rpm c5f31e278f22ded55497828d37107ab5a7fc5c35 x86_64/selinux-policy-mls-2.4.6-27.fc6.noarch.rpm 357bfe85e1de46d4351fbe8f79e8233aeb659250 x86_64/selinux-policy-devel-2.4.6-27.fc6.noarch.rpm 6e71a960e96be43d1e44a919aeb838047778d52f x86_64/selinux-policy-targeted-2.4.6-27.fc6.noarch.rpm 04945d6a1e61c7fd0ca72abad5216694f127687c x86_64/selinux-policy-2.4.6-27.fc6.noarch.rpm 2e1d62e4a77925af9fceecf7bf82294ce948ce99 x86_64/selinux-policy-strict-2.4.6-27.fc6.noarch.rpm c5f31e278f22ded55497828d37107ab5a7fc5c35 i386/selinux-policy-mls-2.4.6-27.fc6.noarch.rpm 357bfe85e1de46d4351fbe8f79e8233aeb659250 i386/selinux-policy-devel-2.4.6-27.fc6.noarch.rpm 6e71a960e96be43d1e44a919aeb838047778d52f i386/selinux-policy-targeted-2.4.6-27.fc6.noarch.rpm 04945d6a1e61c7fd0ca72abad5216694f127687c i386/selinux-policy-2.4.6-27.fc6.noarch.rpm 2e1d62e4a77925af9fceecf7bf82294ce948ce99 i386/selinux-policy-strict-2.4.6-27.fc6.noarch.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From davej at redhat.com Tue Jan 16 03:26:17 2007 From: davej at redhat.com (Dave Jones) Date: Mon, 15 Jan 2007 22:26:17 -0500 Subject: [SECURITY] Fedora Core 6 Test Update: kernel-2.6.19-1.2895.fc6 In-Reply-To: References: <200701112151.l0BLp3gS018621@int-mx1.corp.redhat.com> Message-ID: <20070116032617.GB18993@redhat.com> On Fri, Jan 12, 2007 at 07:25:08AM -0500, Neal Becker wrote: > Dave Jones wrote: > > > --------------------------------------------------------------------- > > Fedora Test Update Notification > > FEDORA-2007-058 > > 2007-01-11 > > --------------------------------------------------------------------- > > Nit: I can't find any mention of just what is the [SECURITY] update about. > If it really is an important security update, please make the nature of it > more obvious so I can tell if it's important to me. odd. I filled out the CVE's in the update tool, and the script that mails out the announcemnet stripped them out. You can find them in the 2.6.19.2 changelog that was linked in the text though. Dave -- http://www.codemonkey.org.uk From buildsys at redhat.com Tue Jan 16 10:34:59 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Tue, 16 Jan 2007 05:34:59 -0500 Subject: rawhide report: 20070116 changes Message-ID: <200701161034.l0GAYxEQ020893@hs20-bc2-6.build.redhat.com> Removed package diskdumputils Removed package netdump Updated Packages: arpwatch-14:2.1a15-3.fc7 ------------------------ device-mapper-multipath-0.4.7-9.fc7 ----------------------------------- * Mon Jan 15 2007 Benjamin Marzinksi - 0.4.7-9.fc7 - Fixed spec file. * Mon Jan 15 2007 Benjamin Marzinski - 0.4.7-8.fc7 - Update to latest code (t0_4_7_head2) * Wed Dec 13 2006 Benjamin Marzinski - 0.4.7-7.fc7 - Update to latest code (t0_4_7_head1) gawk-3.1.5-14.fc7 ----------------- * Mon Jan 15 2007 Karel Zak 3.1.5-14 - sync with double-free upstream fixes - fix #222531: Replace dist by ?dist gdb-6.5-27.fc7 -------------- * Mon Jan 15 2007 Jan Kratochvil - 6.5-27 - Fix the testsuite results broken in 6.5-26, stop invalid testsuite runs. * Sat Jan 13 2007 Jan Kratochvil - 6.5-26 - Fix unwinding of non-debug (.eh_frame) PPC code, Andreas Schwab (BZ 140532). - Fix unwinding of debug (.debug_frame) PPC code, workaround GCC (BZ 140532). - Fix missing testsuite .log output of testcases using get_compiler_info(). * Fri Jan 12 2007 Jan Kratochvil - 6.5-25 - Fix unwinding of non-CFI (w/o debuginfo) PPC code by recent GCC (BZ 140532). gnucash-2.0.4-1.fc6 ------------------- * Mon Jan 08 2007 Bill Nottingham - 2.0.4-1 - update to 2.0.4 gzip-1.3.9-1.fc7 ---------------- * Mon Jan 15 2007 Ivana Varekova 1.3.9-1 - rebuild to 1.3.9 - spec cleanup libselinux-1.33.4-3.fc7 ----------------------- * Mon Jan 15 2007 Dan Walsh - 1.33.4-3 - Add Ulrich NSCD__GETSERV and NSCD__SHMEMGRP for Uli libwmf-0.2.8.4-12 ----------------- * Tue Jan 16 2007 Caolan McNamara 0.2.8.4-12 - Resolves: rhbz#222734 no need for Makefiles in doc dirs logwatch-7.3.2-3.fc7 -------------------- * Tue Jan 16 2007 Ivana Varekova 7.3.2-3 - Resolves: 222263 sshd script problem parted-1.8.2-1.fc7 ------------------ * Fri Jan 12 2007 David Cantrell - 1.8.2-1 - Upgrade to GNU parted-1.8.2 pyparted-1.8.3-1.fc7 -------------------- * Fri Jan 12 2007 David Cantrell - 1.8.3-1 - Required parted-1.8.2 or higher system-config-printer-0.7.48-1.fc7 ---------------------------------- * Mon Jan 15 2007 Tim Waugh 0.7.48-1 - 0.7.48: - Updated translations. system-config-samba-1.2.39-1.fc7 -------------------------------- * Mon Jan 15 2007 Nils Philippsen - 1.2.39 - handle synonyms and inverted synonyms gracefully (#222595) vnc-4.1.2-10.fc7 ---------------- * Mon Jan 15 2007 Adam Tkac 4.1.2-10.fc7 - fixed render crashing when run in 8bpp w3m-0.5.1-15.fc6 ---------------- * Mon Jan 15 2007 Parag Nemade - 0.5.1-15 - Resolves: rh#221484 wireshark-0.99.5-0.pre2.fc7 --------------------------- * Mon Jan 15 2007 Radek Vokal 0.99.5-0.pre2 - another 0.99.5 prerelease, fix build bug and pie flags Broken deps for ia64 ---------------------------------------------------------- mkinitrd - 6.0.6-1.ia64 requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.ia64 requires libparted-1.8.so.0()(64bit) Broken deps for ppc64 ---------------------------------------------------------- mkinitrd - 6.0.6-1.ppc64 requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.ppc64 requires libparted-1.8.so.0()(64bit) Broken deps for s390 ---------------------------------------------------------- mkinitrd - 6.0.6-1.s390 requires libparted-1.8.so.0 nash - 6.0.6-1.s390 requires libparted-1.8.so.0 systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 Broken deps for s390x ---------------------------------------------------------- mkinitrd - 6.0.6-1.s390x requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.s390x requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.s390 requires libparted-1.8.so.0 Broken deps for i386 ---------------------------------------------------------- mkinitrd - 6.0.6-1.i386 requires libparted-1.8.so.0 nash - 6.0.6-1.i386 requires libparted-1.8.so.0 Broken deps for ppc ---------------------------------------------------------- mkinitrd - 6.0.6-1.ppc requires libparted-1.8.so.0 nash - 6.0.6-1.ppc requires libparted-1.8.so.0 Broken deps for x86_64 ---------------------------------------------------------- mkinitrd - 6.0.6-1.x86_64 requires libparted-1.8.so.0()(64bit) nash - 6.0.6-1.i386 requires libparted-1.8.so.0 nash - 6.0.6-1.x86_64 requires libparted-1.8.so.0()(64bit) From dtimms at iinet.net.au Tue Jan 16 15:54:56 2007 From: dtimms at iinet.net.au (David Timms) Date: Wed, 17 Jan 2007 02:54:56 +1100 Subject: Fedora Core 6 Test Update: selinux-policy-2.4.6-27.fc6 In-Reply-To: <200701152320.l0FNKAhB020984@int-mx1.corp.redhat.com> References: <200701152320.l0FNKAhB020984@int-mx1.corp.redhat.com> Message-ID: <45ACF550.5000209@iinet.net.au> Daniel Walsh wrote: > --------------------------------------------------------------------- > Fedora Test Update Notification > FEDORA-2007-082 > 2007-01-15 > --------------------------------------------------------------------- > Product : Fedora Core 6 > Name : selinux-policy > Version : 2.4.6 > Release : 27.fc6 > --------------------------------------------------------------------- > * Mon Jan 15 2007 Dan Walsh 2.4.6-27 > - Fix senmail avc trying to read /root ........../\ might have been fast on the fingers this day ? > - Remove file_context for exportfs > Resolves: #221181 > - Allow spamassassin to create ~/.spamassissin .........................................../\. Dan, is that a bug in the spamassassin source, or in the policy, or just the changelog ? DaveT. From alexl at redhat.com Tue Jan 16 17:48:00 2007 From: alexl at redhat.com (Alexander Larsson) Date: Tue, 16 Jan 2007 12:48:00 -0500 Subject: Fedora Core 6 Test Update: libgpod-0.4.2-0.1.fc6 Message-ID: <200701161748.l0GHm0OO025240@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-084 2007-01-16 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libgpod Version : 0.4.2 Release : 0.1.fc6 Summary : Library to access the contents of an iPod Description : Libgpod is a library to access the contents of an iPod. It supports playlists, smart playlists, playcounts, ratings, podcasts, album artwork, photos, etc. --------------------------------------------------------------------- Update Information: This upgrade fixes many issues in libgpod, including working with newer ipods. The new version is not binary compatible with the older version, so a compat-libgpod is included to keep applications using the old version working. To get full use of the update applications using libgpod will also need to be updated so that they use the new version. --------------------------------------------------------------------- * Sun Jan 14 2007 Todd Zullinger - 0.4.2-0.1 - Update to 0.4.2 - Change %description to reflect newer features - Make %setup quiet - Remove TODO file from %doc as it's not included anymore - Explicitly disable the python bindings, they are in the python-gpod package in Extras until the Core/Extras merge - Add compatibility package for libgpod-0.3.2 * Mon Nov 20 2006 Alexander Larsson - 0.4.0-2 - Add ldconfig calls in post/postun * Mon Nov 13 2006 Matthias Clasen - 0.4.0-1 - Update to 0.4.0 - Include docs in the -devel package - Don't ship static libraries --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 3f7fdd30215f8e81974a5f5ab9c524ebbddb2671 SRPMS/libgpod-0.4.2-0.1.fc6.src.rpm 3f7fdd30215f8e81974a5f5ab9c524ebbddb2671 noarch/libgpod-0.4.2-0.1.fc6.src.rpm 75dc4ddd5b0a6754b01cdc4c46f05dff1f50e471 ppc/libgpod-devel-0.4.2-0.1.fc6.ppc.rpm 261aa9f7090cdb26c62eb304246ef680f17261f5 ppc/debug/libgpod-debuginfo-0.4.2-0.1.fc6.ppc.rpm a76d4e5eb5b9b0554f31d807562a6551518dcc6e ppc/compat-libgpod-0.3.2-0.1.fc6.ppc.rpm 1468cca60f687362b50ea8dcd6fed1394eb4c09e ppc/libgpod-0.4.2-0.1.fc6.ppc.rpm cddfa62dd080b86d294761dadcfdc7e66e07d7cc x86_64/libgpod-devel-0.4.2-0.1.fc6.x86_64.rpm 082f4dbdabae0ab28c746fc9bab453fb9b507ff3 x86_64/compat-libgpod-0.3.2-0.1.fc6.x86_64.rpm d39ef9e1d3ee70b66c940a73bc90a7c519fa87dc x86_64/libgpod-0.4.2-0.1.fc6.x86_64.rpm afba414b56ae4d6d1a0e0f8ac2242d2915cc536f x86_64/debug/libgpod-debuginfo-0.4.2-0.1.fc6.x86_64.rpm 5fac4ec122dc2b0182eca452a85e407da2f70150 i386/libgpod-0.4.2-0.1.fc6.i386.rpm 438441fda1a9707097467949e3cf045e47659d88 i386/compat-libgpod-0.3.2-0.1.fc6.i386.rpm 72ee1c1771b11acb62f1d5c036dc22e85b7ca268 i386/libgpod-devel-0.4.2-0.1.fc6.i386.rpm 62b1a1f4f59d49a9df5681b384bdf762f6ca2e9b i386/debug/libgpod-debuginfo-0.4.2-0.1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From cra at WPI.EDU Tue Jan 16 17:49:53 2007 From: cra at WPI.EDU (Chuck Anderson) Date: Tue, 16 Jan 2007 12:49:53 -0500 Subject: FC6 updates-testing repo broken Message-ID: <20070116174953.GR17053@angus.ind.WPI.EDU> download.fedora.redhat.com is missing some files: ---> Downloading header for udev to pack into transaction set. http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/i386/udev-095-17.fc6.i386.rpm: [Errno 14] HTTP Error 404: Date: Tue, 16 Jan 2007 17:46:00 GMT Server: Apache/2.0.52 (Red Hat) Last-Modified: Tue, 16 Jan 2007 17:16:16 GMT ETag: "378bb7-1176-850ad800" Accept-Ranges: bytes Content-Length: 4470 Connection: close Content-Type: text/html; charset=UTF-8 Trying other mirror. Error: failure: udev-095-17.fc6.i386.rpm from updates-testing: [Errno 256] No more mirrors to try. evolution-data-server - 1.8.2-2.fc6.i386: failure: evolution-data-server-1.8.2-2.fc6.i386.rpm from updates-testing: [Errno 256] No more mirrors to try. libvolume_id - 095-17.fc6.i386: failure: libvolume_id-095-17.fc6.i386.rpm from updates-testing: [Errno 256] No more mirrors to try. udev - 095-17.fc6.i386: failure: udev-095-17.fc6.i386.rpm from updates-testing: [Errno 256] No more mirrors to try. From jkeating at redhat.com Tue Jan 16 17:56:28 2007 From: jkeating at redhat.com (Jesse Keating) Date: Tue, 16 Jan 2007 12:56:28 -0500 Subject: FC6 updates-testing repo broken In-Reply-To: <20070116174953.GR17053@angus.ind.WPI.EDU> References: <20070116174953.GR17053@angus.ind.WPI.EDU> Message-ID: <200701161256.29032.jkeating@redhat.com> On Tuesday 16 January 2007 12:49, Chuck Anderson wrote: > download.fedora.redhat.com is missing some files: I _just_ did a push, perhaps you hit the magic moment in the middle of the push where data doesn't match the repodata? -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From cra at WPI.EDU Tue Jan 16 18:01:56 2007 From: cra at WPI.EDU (Chuck Anderson) Date: Tue, 16 Jan 2007 13:01:56 -0500 Subject: FC6 updates-testing repo broken In-Reply-To: <200701161256.29032.jkeating@redhat.com> References: <20070116174953.GR17053@angus.ind.WPI.EDU> <200701161256.29032.jkeating@redhat.com> Message-ID: <20070116180156.GS17053@angus.ind.WPI.EDU> On Tue, Jan 16, 2007 at 12:56:28PM -0500, Jesse Keating wrote: > On Tuesday 16 January 2007 12:49, Chuck Anderson wrote: > > download.fedora.redhat.com is missing some files: > > I _just_ did a push, perhaps you hit the magic moment in the middle of the > push where data doesn't match the repodata? Perhaps, but I was using my local mirror before that test with d.f.r.c, so all the planets must have been in perfect alignment for my mirror to sync from duke, and duke to sync from the master at the exact moment you did the push. It looks like what happened is those packages were moved from updates-testing to updates, and not deleted from updates-testing's repodata. I worked around this by disabling updates-testing temporarily, yum update, then reenabling, and it works fine now. From kevin.kofler at chello.at Tue Jan 16 18:43:40 2007 From: kevin.kofler at chello.at (Kevin Kofler) Date: Tue, 16 Jan 2007 18:43:40 +0000 (UTC) Subject: [SECURITY] Fedora Core 6 Test Update: kernel-2.6.19-1.2895.fc6 References: <200701112151.l0BLp3gS018621@int-mx1.corp.redhat.com> Message-ID: Dave Jones redhat.com> writes: > Name : kernel > Version : 2.6.19 > Release : 1.2895.fc6 This works fine on my Pentium 4 (with a single PATA disk on sata-promise and a software RAID 0 on the regular IDE controller). It also works fine in an x86_64 QEMU virtual machine. Users of out-of-tree wireless drivers will have some "fun" though. Here's some patches against Ralink's rt2570 2.0.8.0 (based on the fixes in the rt2x00 CVS), which may also be useful as a reference for those wanting to fix other WLAN drivers. Compile fix: http://www.tigen.org/kevin.kofler/pcprogs/rt2570-2.0.8.0-get_wireless_stats.diff SSID truncation fix: http://www.tigen.org/kevin.kofler/pcprogs/rt2570-2.0.8.0-rtusb_info-2.6.19.diff Kevin Kofler From dwalsh at redhat.com Tue Jan 16 20:37:01 2007 From: dwalsh at redhat.com (Daniel J Walsh) Date: Tue, 16 Jan 2007 15:37:01 -0500 Subject: Fedora Core 6 Test Update: selinux-policy-2.4.6-27.fc6 In-Reply-To: <45ACF550.5000209@iinet.net.au> References: <200701152320.l0FNKAhB020984@int-mx1.corp.redhat.com> <45ACF550.5000209@iinet.net.au> Message-ID: <45AD376D.1070502@redhat.com> David Timms wrote: > Daniel Walsh wrote: >> --------------------------------------------------------------------- >> Fedora Test Update Notification >> FEDORA-2007-082 >> 2007-01-15 >> --------------------------------------------------------------------- >> Product : Fedora Core 6 >> Name : selinux-policy >> Version : 2.4.6 >> Release : 27.fc6 >> --------------------------------------------------------------------- >> * Mon Jan 15 2007 Dan Walsh 2.4.6-27 >> - Fix senmail avc trying to read /root > ........../\ might have been fast on the fingers this day ? >> - Remove file_context for exportfs >> Resolves: #221181 >> - Allow spamassassin to create ~/.spamassissin > .........................................../\. > Dan, is that a bug in the spamassassin source, or in the policy, or > just the changelog ? > > DaveT. > Just changelog From twaugh at redhat.com Tue Jan 16 22:42:30 2007 From: twaugh at redhat.com (Tim Waugh) Date: Tue, 16 Jan 2007 17:42:30 -0500 Subject: Fedora Core 6 Test Update: system-config-printer-0.7.49-1.fc6 Message-ID: <200701162242.l0GMgUrt028883@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-022 2007-01-16 --------------------------------------------------------------------- Product : Fedora Core 6 Name : system-config-printer Version : 0.7.49 Release : 1.fc6 Summary : A printer administration tool Description : system-config-printer is a graphical user interface that allows the user to configure a CUPS print server. --------------------------------------------------------------------- Update Information: Bug fix update for "wrong page size" problem, incorrect missing driver check, and some minor text problems. --------------------------------------------------------------------- * Tue Jan 16 2007 Tim Waugh 0.7.49-1 - 0.7.49: - Fixed a traceback in the driver check code. - Fixed a typo in the conflicts message. - Handle InputSlot/ManualFeed specially because libcups does (bug #222490). * Mon Jan 15 2007 Tim Waugh 0.7.48-1 - 0.7.48: - Updated translations. * Fri Jan 12 2007 Tim Waugh 0.7.47-1 - 0.7.47: - Fixed minor text bugs (bug #177433). - Handle shell builtins in the driver check (bug #222413). * Mon Jan 8 2007 Tim Waugh 0.7.46-1 - 0.7.46: - Fixed page size problem (bug #221702). - Added 'ro' to ALL_LINGUAS. * Wed Jan 3 2007 Tim Waugh 0.7.45-1 - Updated to pycups-1.9.17. - 0.7.45: - Fixed traceback in driver check. * Tue Jan 2 2007 Tim Waugh 0.7.44-1 - 0.7.44: - Fixed traceback in error display (bug #220136). - Preserve case in model string when dumping debug output. * Thu Dec 21 2006 Tim Waugh 0.7.43-1 - 0.7.43: - Don't check against IEEE 1284 DES field at all. - Merged device matching code (bug #219518). - Catch non-fatal errors when auto-matching device. - Fixed driver checking bug involving pipelines (bug #220347). - Show PPD errors (bug #220136). * Mon Dec 11 2006 Tim Waugh 0.7.42-1 - 0.7.42: - Fixed typo in command set matching code. - Case-insensitive matching when Device ID not known to database. * Thu Dec 7 2006 Tim Waugh 0.7.41-1 - Updated pycups to 1.9.16. - 0.7.41: - Reconnect smoothly after uploading new configuration. - Update lpoptions when setting default printer if it conflicts with the new setting (bug #217395). - Fixed typo in show_HTTP_Error (bug #217537). - Don't pre-select make and model when not discoverable for chosen device (bug #217518). - Set Forward button sensitive on Device screen in new-printer dialog (bug #217515). - Keep Server Settings selected after applying changes if it was selected before. - Set Connecting dialog transient for main window. - Center Connecting dialog on parent. - Optional 'reason' argument for cupshelpers.Printer.setEnabled. - Describe devices that have no optional parameters. * Thu Nov 30 2006 Tim Waugh - Provide pycups feature. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ feeb81470aa44c69d80b613d1ff7a407499c83ca SRPMS/system-config-printer-0.7.49-1.fc6.src.rpm feeb81470aa44c69d80b613d1ff7a407499c83ca noarch/system-config-printer-0.7.49-1.fc6.src.rpm 020e58a30ad9b852d221b14a8fb8744817a37f17 ppc/system-config-printer-libs-0.7.49-1.fc6.ppc.rpm d48d0c8c0e1f420bd6256e937b575ab289b3909e ppc/debug/system-config-printer-debuginfo-0.7.49-1.fc6.ppc.rpm e7619a7b797450d92abf50168707a38a3c2f01bc ppc/system-config-printer-0.7.49-1.fc6.ppc.rpm afbeccd2b405cc3c35eebfff7157cf642ecf8e6d x86_64/system-config-printer-0.7.49-1.fc6.x86_64.rpm 0029d9b98613c82e45e3776fee36b53e67c455a8 x86_64/debug/system-config-printer-debuginfo-0.7.49-1.fc6.x86_64.rpm 2a8db6673902c7b2d04a4a5a82d2589becb7afef x86_64/system-config-printer-libs-0.7.49-1.fc6.x86_64.rpm 74c4a9febabd4a2b4e2c57f1400c6ac410577ff6 i386/system-config-printer-0.7.49-1.fc6.i386.rpm f01d024f35d4f8ded479e9123e9fff6a3529498a i386/system-config-printer-libs-0.7.49-1.fc6.i386.rpm 66b5ab2a0b3c045bf80f902f8f24e21d2af6998e i386/debug/system-config-printer-debuginfo-0.7.49-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From buildsys at redhat.com Wed Jan 17 11:42:50 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Wed, 17 Jan 2007 06:42:50 -0500 Subject: rawhide report: 20070117 changes Message-ID: <200701171142.l0HBgoev000680@hs20-bc2-6.build.redhat.com> Updated Packages: anaconda-11.2.0.10-1 -------------------- * Tue Jan 16 2007 Chris Lumens - 11.2.0.10-1 - Remove deps when going back from package selection (dlehman, #222894). - Fix UI when going back from package selection (dlehman, #215493). - Update kickstart code to use new pykickstart API. - Fix loader test for NULL (yanmin.zhang AT intel.com, #222767). - Don't display the unsupported lang box in kickstart installs (#222096). - Error message fixes in package installation (katzj). - Update DHCP UI (dcantrell). - Correct behavior of escape key in release notes viewer (dcantrell, #220418). bash-3.2-2.fc7 -------------- * Tue Jan 16 2007 Miroslav Lichvar 3.2-2 - Link with ncurses. bind-31:9.3.3-3.fc7 ------------------- * Tue Jan 16 2007 Martin Stransky - 30:9.3.3-3 - fixed a multi-lib issue - Resolves: rhbz#222717 curl-7.16.0-5.fc7 ----------------- * Tue Jan 16 2007 Jindrich Novy 7.16.0-5 - don't package generated makefiles for docs/examples to avoid multilib conflicts glib2-2.12.9-1.fc7 ------------------ * Tue Jan 16 2007 Matthias Clasen - 2.12.9-1 - Update to 2.12.9 gtk2-2.10.8-1.fc7 ----------------- * Wed Jan 17 2007 Matthias Clasen - 2.10.8-1 - Update to 2.10.8 libgpod-0.4.2-1.fc7 ------------------- * Tue Jan 16 2007 Alexander Larsson - 0.4.2-1 - update to 0.4.2 - Change %description to reflect newer features - Remove TODO file from %doc as it's not included anymore - Explicitly disable the python bindings, they are in the python-gpod package in Extras until the Core/Extras merge libselinux-1.33.5-1.fc7 ----------------------- * Mon Jan 15 2007 Dan Walsh - 1.33.5-1 - Upgrade to upstream * Merged getdefaultcon utility from Dan Walsh. libtiff-3.8.2-7.fc7 ------------------- * Tue Jan 16 2007 Tom Lane 3.8.2-7 - Remove Makefiles from the shipped /usr/share/doc/html directories Resolves: bz #222729 lv-4.51-9.fc7 ------------- * Tue Jan 16 2007 Miroslav Lichvar - 4.51-9 - link with ncurses - add dist tag * Wed Jul 12 2006 Jesse Keating - 4.51-8.1 - rebuild * Mon Jun 12 2006 Akira TAGOH - 4.51-8 - clean up the spec file. - add autoconf to BuildReq. (#194753) m17n-db-1.3.4-3.fc7 ------------------- * Tue Jan 16 2007 Mayank Jain - Added Patch 3 as sk-kbd-222804.patch to fix bug 222804 mkinitrd-6.0.6-2 ---------------- * Tue Jan 16 2007 Jesse Keating - 6.0.6-2 - rebuild for new parted nspr-4.6.4-2 ------------ * Fri Feb 16 2007 Kai Engert - 4.6.4-2 - Include upstream patch to fix ipv6 support (rhbz 222554) openoffice.org-1:2.1.0-6.13 --------------------------- * Mon Jan 15 2007 Caolan McNamara - 1:2.1.0-6.13 - Resolves: rhbz#222426 add openoffice.org-2.1.0.ooo73481.svx.longnotint32.patch - Resolves: rhbz#222423 openoffice.org-2.1.0.ooo73485.vcl.filterzwatrender.patch - Resolves: rhbz#222420 DejaVu font has two plausible english names openssh-4.5p1-2.fc7 ------------------- * Tue Jan 16 2007 Tomas Mraz - 4.5p1-2 - support mls on labeled networks (#220487) - support mls level selection on unlabeled networks - allow / in usernames in scp (only beginning /, ./, and ../ is special) pam-0.99.6.2-8.fc7 ------------------ * Tue Jan 16 2007 Tomas Mraz 0.99.6.2-8 - properly include /var/log/faillog and tallylog as ghosts and create them in post script (#209646) - update gmo files as we patch some po files (#218271) - add use_current_range option to pam_selinux (#220487) - improve the role selection in pam_selinux - remove shortcut on Password: in ja locale (#218271) - revert to old euid and not ruid when setting euid in pam_keyinit (#219486) - rename selinux-namespace patch to namespace-level * Fri Dec 01 2006 Dan Walsh 0.99.6.2-7 - fix selection of role * Fri Dec 01 2006 Dan Walsh 0.99.6.2-6 - add possibility to pam_namespace to only change MLS component - Resolves: Bug #216184 policycoreutils-1.33.14-1.fc7 ----------------------------- * Tue Jan 16 2007 Dan Walsh 1.33.14-1 * Merged newrole man page patch from Michael Thompson. * Merged patch to fix python unicode problem from Dan Walsh. * Tue Jan 16 2007 Dan Walsh 1.33.12-3 - Fix handling of audit messages for useradd change Resolves: #222159 pykickstart-0.90-1.fc7 ---------------------- * Tue Jan 16 2007 Chris Lumens - 0.90-1 - Support multiple versions of kickstart syntax from one code base (#189348). - Fix inconsistency between Script parser and writer (#222877). python-2.5-9.fc7 ---------------- * Tue Jan 16 2007 Miroslav Lichvar - 2.5.3-9 - link with ncurses * Sat Jan 06 2007 Jeremy Katz - 2.5.3-8 - fix extensions to use shared libpython (#219564) - all 64bit platforms need the regex fix (#122304) * Wed Jan 03 2007 Jeremy Katz - 2.5.3-7 - fix ctypes to not require execstack (#220669) rhythmbox-0.9.7-6.fc7 --------------------- * Tue Jan 16 2007 Alexander Larsson - 0.9.7-6.fc7 - rebuild with new libgpod stardict-2.4.8-2.fc7 -------------------- * Tue Jan 16 2007 Mayank Jain - Removed gnome support from the spec file (--disable-gnome-support) for bug 213850 - Commented the gnome related directives. strace-4.5.15-1.fc7 ------------------- * Tue Jan 16 2007 Roland McGrath - 4.5.15-1 - biarch fixes (#179740, #192193, #171626, #173050, #218433, #218043) - fix -ff -o behavior (#204950, #218435, #193808, #219423) - better quotactl printing (#118696) - *at, inotify*, pselect6, ppoll and unshare syscalls (#178633, #191275) - glibc-2.5 build fixes (#209856) - memory corruption fixes (#200621 - fix race in child setup under -f (#180293) - show ipc key values in hex (#198179, #192182) - disallow -c with -ff (#187847) - Resolves: RHBZ #179740, RHBZ #192193, RHBZ #204950, RHBZ #218435 - Resolves: RHBZ #193808, RHBZ #219423, RHBZ #171626, RHBZ #173050 - Resolves: RHBZ #218433, RHBZ #218043, RHBZ #118696, RHBZ #178633 - Resolves: RHBZ #191275, RHBZ #209856, RHBZ #200621, RHBZ #180293 - Resolves: RHBZ #198179, RHBZ #198182, RHBZ #187847 system-config-kickstart-2.7.1-1.fc7 ----------------------------------- * Tue Jan 16 2007 Chris Lumens 2.7.1-1 - Update to use new pykickstart. - Don't traceback if no monitor or x driver is selected. - Handle pykickstart exceptions by displaying an error dialog. system-config-printer-0.7.49-1.fc7 ---------------------------------- * Tue Jan 16 2007 Tim Waugh 0.7.49-1 - 0.7.49: - Fixed a traceback in the driver check code. - Fixed a typo in the conflicts message. - Handle InputSlot/ManualFeed specially because libcups does (bug #222490). tomboy-0.5.3-1.fc7 ------------------ * Thu Jan 11 2007 Matthias Clasen - 0.5.3-1 - Update to 0.5.3 * Wed Dec 20 2006 Matthias Clasen - 0.5.2-1 - Update to 0.5.2 zsh-4.2.6-3.fc7 --------------- * Tue Jan 16 2007 Miroslav Lichvar - 4.2.6-3 - Link with ncurses - Add dist tag - Make scriptlets safer * Tue Sep 19 2006 James Antill - 4.2.6-2 - Add --enable-maildir-support BZ#186281 Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From justin.conover at gmail.com Wed Jan 17 14:57:09 2007 From: justin.conover at gmail.com (Justin Conover) Date: Wed, 17 Jan 2007 08:57:09 -0600 Subject: Kernel-2.6.20-rc* Message-ID: Dave Jones, Do you know when you will be building a kernel off of that? I'm interested in rc2 and beyond http://uwsg.iu.edu/hypermail/linux/kernel/0612.3/0000.html I was wanting to test the Novatel U720 Eric Smith (1): usb serial: add support for Novatel S720/U720 CDMA/EV-DO modems http://marc2.theaimsgroup.com/?l=linux-mm-commits&m=116577893917749&q=raw Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: From david at lovesunix.net Wed Jan 17 15:07:48 2007 From: david at lovesunix.net (David Nielsen) Date: Wed, 17 Jan 2007 16:07:48 +0100 Subject: Kernel-2.6.20-rc* In-Reply-To: References: Message-ID: <1169046468.3204.197.camel@dawkins> ons, 17 01 2007 kl. 08:57 -0600, skrev Justin Conover: > Dave Jones, > > Do you know when you will be building a kernel off of that? > > I'm interested in rc2 and beyond > > http://uwsg.iu.edu/hypermail/linux/kernel/0612.3/0000.html > > I was wanting to test the Novatel U720 > > Eric Smith (1): > usb serial: add support for Novatel S720/U720 CDMA/EV-DO modems > > http://marc2.theaimsgroup.com/?l=linux-mm-commits&m=116577893917749&q=raw Development is already running a .20-rc based kernel. - David Nielsen -- "Ridicule is the only weapon that can be used against unintelligible propositions. Ideas must be distinct before reason can act upon them.? -Thomas Jefferson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: Dette er en digitalt underskrevet brevdel URL: From katzj at redhat.com Wed Jan 17 15:07:12 2007 From: katzj at redhat.com (Jeremy Katz) Date: Wed, 17 Jan 2007 10:07:12 -0500 Subject: Kernel-2.6.20-rc* In-Reply-To: References: Message-ID: <1169046432.28819.0.camel@aglarond.local> On Wed, 2007-01-17 at 08:57 -0600, Justin Conover wrote: > Do you know when you will be building a kernel off of that? > > I'm interested in rc2 and beyond rawhide has been at rc2 or so since the beginning of the year. Jeremy From justin.conover at gmail.com Wed Jan 17 15:14:59 2007 From: justin.conover at gmail.com (Justin Conover) Date: Wed, 17 Jan 2007 09:14:59 -0600 Subject: Kernel-2.6.20-rc* In-Reply-To: <1169046432.28819.0.camel@aglarond.local> References: <1169046432.28819.0.camel@aglarond.local> Message-ID: On 1/17/07, Jeremy Katz wrote: > > On Wed, 2007-01-17 at 08:57 -0600, Justin Conover wrote: > > Do you know when you will be building a kernel off of that? > > > > I'm interested in rc2 and beyond > > rawhide has been at rc2 or so since the beginning of the year. > > Jeremy > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list > Sorry, just looked at the source file * Thu Jan 11 2007 Jeremy Katz - disable nmi watchdog by default * Wed Jan 10 2007 Dave Jones - 2.6.20rc4-git4 - PIIX3 PATA support. * Sun Jan 7 2007 Dave Jones - 2.6.20rc4 * Sat Jan 6 2007 Dave Jones - 2.6.20rc3-git4 Thanks for the replys! Guess I need to plugin and see if it works :) -------------- next part -------------- An HTML attachment was scrubbed... URL: From mclasen at redhat.com Wed Jan 17 16:32:12 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 17 Jan 2007 11:32:12 -0500 Subject: Fedora Core 6 Test Update: glib2-2.12.9-1.fc6 Message-ID: <200701171632.l0HGWC3j025324@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-093 2007-01-17 --------------------------------------------------------------------- Product : Fedora Core 6 Name : glib2 Version : 2.12.9 Release : 1.fc6 Summary : A library of handy utility functions Description : GLib is the low-level core library that forms the basis for projects such as GTK+ and GNOME. It provides data structure handling for C, portability wrappers, and interfaces for such runtime functionality as an event loop, threads, dynamic loading, and an object system. This package provides version 2 of GLib. --------------------------------------------------------------------- Update Information: The latest stable upstream release of GLib fixes a number of issues. --------------------------------------------------------------------- * Wed Jan 17 2007 Matthias Clasen - 2.12.9-1 - Update to 2.12.9 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ e80a7eba00063c8553b54c730d0e371d856b86dd SRPMS/glib2-2.12.9-1.fc6.src.rpm e80a7eba00063c8553b54c730d0e371d856b86dd noarch/glib2-2.12.9-1.fc6.src.rpm 03fc5d7302b0e88aad9ddfd891800731fd501312 ppc/glib2-2.12.9-1.fc6.ppc.rpm a7b747bf62b380a89560bef7335e60ad75ccb993 ppc/debug/glib2-debuginfo-2.12.9-1.fc6.ppc.rpm f01ae4b0c24a369bafea1aceb3b5a1b8f1cbfa2c ppc/glib2-devel-2.12.9-1.fc6.ppc.rpm 1a0793571c237e4046c43fd89c0f434a678cc110 x86_64/debug/glib2-debuginfo-2.12.9-1.fc6.x86_64.rpm 4a6317f17a43dcb549b2ebe15e134715951adc17 x86_64/glib2-2.12.9-1.fc6.x86_64.rpm bf42fa49c26d07fcf7e7935b4b8c8044122ab8f0 x86_64/glib2-devel-2.12.9-1.fc6.x86_64.rpm fea14dcf77f1c7f3722f877e51e748a2807a1ac6 i386/glib2-2.12.9-1.fc6.i386.rpm 9dc3395d6ff370f192862311104c6a444b34b769 i386/glib2-devel-2.12.9-1.fc6.i386.rpm 366895af33d5dd2280e31f0969e00f5cd536b0a2 i386/debug/glib2-debuginfo-2.12.9-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From alexl at redhat.com Wed Jan 17 16:33:37 2007 From: alexl at redhat.com (Alexander Larsson) Date: Wed, 17 Jan 2007 11:33:37 -0500 Subject: Fedora Core 6 Test Update: rhythmbox-0.9.7-1.fc6 Message-ID: <200701171633.l0HGXbdW025826@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-094 2007-01-17 --------------------------------------------------------------------- Product : Fedora Core 6 Name : rhythmbox Version : 0.9.7 Release : 1.fc6 Summary : Music Management Application Description : Rhythmbox is an integrated music management application based on the powerful GStreamer media framework. It has a number of features, including an easy to use music browser, searching and sorting, comprehensive audio format support through GStreamer, Internet Radio support, playlists and more. --------------------------------------------------------------------- Update Information: This update of rhythmbox fixes a lot of bugs, especially related to ipod use. (Uses the recently updated libgpod) --------------------------------------------------------------------- * Tue Jan 16 2007 Alexander Larsson - 0.9.7-1.fc6 - Update to 0.9.7 - rebuild with new libgpod * Sun Nov 26 2006 Ray Strode - 0.9.5-8 - drop keybinding patch (bug 217315) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 0b019b4b5fef678539a7f012d9fa65aef66dda96 SRPMS/rhythmbox-0.9.7-1.fc6.src.rpm 0b019b4b5fef678539a7f012d9fa65aef66dda96 noarch/rhythmbox-0.9.7-1.fc6.src.rpm c34261fc011955234ffb116634849eb0fec2b8f1 ppc/rhythmbox-0.9.7-1.fc6.ppc.rpm d2596c7209127018c3dba36e7c7fe1616625d95b ppc/debug/rhythmbox-debuginfo-0.9.7-1.fc6.ppc.rpm 8bada82b1e6e8efeb51b8a003b62ccb1a1a069d1 x86_64/debug/rhythmbox-debuginfo-0.9.7-1.fc6.x86_64.rpm 8d65faa9093e0e1e046099af844d9d1a0eadaed8 x86_64/rhythmbox-0.9.7-1.fc6.x86_64.rpm 2a0c8e165e32b740b047f225bc05b02783cee1d1 i386/debug/rhythmbox-debuginfo-0.9.7-1.fc6.i386.rpm e12a2d970d1cca9662dacf6ec8d2301a784f09e9 i386/rhythmbox-0.9.7-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From veillard at redhat.com Wed Jan 17 16:34:38 2007 From: veillard at redhat.com (Daniel Veillard) Date: Wed, 17 Jan 2007 11:34:38 -0500 Subject: Fedora Core 6 Test Update: libxslt-1.1.20-1.fc6 Message-ID: <200701171634.l0HGYcKA026132@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-095 2007-01-17 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libxslt Version : 1.1.20 Release : 1.fc6 Summary : Library providing the Gnome XSLT engine Description : This C library allows to transform XML files into other XML files (or HTML, text, ...) using the standard XSLT stylesheet transformation mechanism. To use it you need to have a version of libxml2 >= 2.6.27 installed. The xsltproc command is a command line interface to the XSLT engine --------------------------------------------------------------------- Update Information: Upstream release, fixes bugs present in 1.1.18 and 1.1.19 --------------------------------------------------------------------- * Wed Nov 29 2006 Daniel Veillard - 1.1.20-1.fc6 - upstream release 1.1.20 see http://xmlsoft.org/XSLT/news.html * Wed Nov 29 2006 Daniel Veillard - 1.1.19-1.fc6 - upstream release 1.1.19 see http://xmlsoft.org/XSLT/news.html * Thu Oct 26 2006 Daniel Veillard - 1.1.18-1.FC6 - upstream release 1.1.18 see http://xmlsoft.org/XSLT/news.html --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 10413bce36ae82759cb71e998a6a71aea60e0886 SRPMS/libxslt-1.1.20-1.fc6.src.rpm 10413bce36ae82759cb71e998a6a71aea60e0886 noarch/libxslt-1.1.20-1.fc6.src.rpm 37b6ad5d9aa7935bfbd49ee8e7ef8ecb1230bc71 ppc/libxslt-1.1.20-1.fc6.ppc.rpm 8cc4d0aaec29c376db12b0a32e2d833ffcb55c68 ppc/debug/libxslt-debuginfo-1.1.20-1.fc6.ppc.rpm 54e29c7a7b6e8cda3e5d17c99830487ecd4df04c ppc/libxslt-devel-1.1.20-1.fc6.ppc.rpm ab8ca1db95779c8e99de89eaaadbc08e0fc0d0a2 ppc/libxslt-python-1.1.20-1.fc6.ppc.rpm 2d995f781b047b24b63283c44bf8e4d0ff9a2076 x86_64/debug/libxslt-debuginfo-1.1.20-1.fc6.x86_64.rpm 4b6114b7366df05d8a663e9ac5a94dd0e54c1799 x86_64/libxslt-devel-1.1.20-1.fc6.x86_64.rpm 1566a34fe86293a189feb4ef315a9dcfbecdb3e5 x86_64/libxslt-python-1.1.20-1.fc6.x86_64.rpm c1f682ce2d8b236273946d134d1591afa2997f91 x86_64/libxslt-1.1.20-1.fc6.x86_64.rpm ece0b108e3cebe282bf5db6c4efdecd44d916dff i386/libxslt-python-1.1.20-1.fc6.i386.rpm 80477b7800f55b75beff493f07630f1704cac0de i386/libxslt-devel-1.1.20-1.fc6.i386.rpm 59ef8a8b02b521b6e73e352ae1d635441d9a6421 i386/libxslt-1.1.20-1.fc6.i386.rpm 9067ce4f62aa49fa191ec7426212354e85b63140 i386/debug/libxslt-debuginfo-1.1.20-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mefoster at gmail.com Wed Jan 17 19:30:38 2007 From: mefoster at gmail.com (Mary Ellen Foster) Date: Wed, 17 Jan 2007 19:30:38 +0000 Subject: Fedora Core 6 Test Update: libxslt-1.1.20-1.fc6 In-Reply-To: <200701171634.l0HGYcKA026132@int-mx1.corp.redhat.com> References: <200701171634.l0HGYcKA026132@int-mx1.corp.redhat.com> Message-ID: On 17/01/07, Daniel Veillard wrote: > Product : Fedora Core 6 > Name : libxslt > Version : 1.1.20 > Release : 1.fc6 > Summary : Library providing the Gnome XSLT engine This update seems not to be signed ... :( MEF -- Mary Ellen Foster http://homepages.inf.ed.ac.uk/mef/ From veillard at redhat.com Wed Jan 17 20:35:56 2007 From: veillard at redhat.com (Daniel Veillard) Date: Wed, 17 Jan 2007 15:35:56 -0500 Subject: Fedora Core 6 Test Update: libxslt-1.1.20-1.fc6 Message-ID: <200701172035.l0HKZu8R004504@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-095 2007-01-17 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libxslt Version : 1.1.20 Release : 1.fc6 Summary : Library providing the Gnome XSLT engine Description : This C library allows to transform XML files into other XML files (or HTML, text, ...) using the standard XSLT stylesheet transformation mechanism. To use it you need to have a version of libxml2 >= 2.6.27 installed. The xsltproc command is a command line interface to the XSLT engine --------------------------------------------------------------------- Update Information: Upstream release, fixes bugs present in 1.1.18 and 1.1.19 --------------------------------------------------------------------- * Wed Nov 29 2006 Daniel Veillard - 1.1.20-1.fc6 - upstream release 1.1.20 see http://xmlsoft.org/XSLT/news.html * Wed Nov 29 2006 Daniel Veillard - 1.1.19-1.fc6 - upstream release 1.1.19 see http://xmlsoft.org/XSLT/news.html * Thu Oct 26 2006 Daniel Veillard - 1.1.18-1.FC6 - upstream release 1.1.18 see http://xmlsoft.org/XSLT/news.html --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ a40db2a0d0cb3a2e496d6c3d5cbf3d8639aea185 SRPMS/libxslt-1.1.20-1.fc6.src.rpm a40db2a0d0cb3a2e496d6c3d5cbf3d8639aea185 noarch/libxslt-1.1.20-1.fc6.src.rpm 7c8beeb68b5b0ffd13c9f5b5ae3c7d67198fbe48 ppc/libxslt-1.1.20-1.fc6.ppc.rpm 102327d7c783d9244e5fca3b15dac0f2e7876bf1 ppc/debug/libxslt-debuginfo-1.1.20-1.fc6.ppc.rpm 9caf2c24aa419557808339091158b5c8c18c329b ppc/libxslt-devel-1.1.20-1.fc6.ppc.rpm 6ebcfedad4180683583eefbc33fd7dfcc46ac18d ppc/libxslt-python-1.1.20-1.fc6.ppc.rpm 9c0945649b63a99b4709f001e729fdd3668852d5 x86_64/debug/libxslt-debuginfo-1.1.20-1.fc6.x86_64.rpm 0b08f08c4da9430e76b8e907f163507447fc9292 x86_64/libxslt-devel-1.1.20-1.fc6.x86_64.rpm 4510b4d7d3f619c6ece5f07a3bc3adfc1b98b0e2 x86_64/libxslt-python-1.1.20-1.fc6.x86_64.rpm f8782d0e735d6826f066ee7b0a4d4a22fa65565b x86_64/libxslt-1.1.20-1.fc6.x86_64.rpm 6ee2e5cdf4252ffdcbc9e71fe47afdcce50b59c7 i386/libxslt-python-1.1.20-1.fc6.i386.rpm dbe29e5d8fc8dfd09bd30849ba8ee6ab9426f7cd i386/libxslt-devel-1.1.20-1.fc6.i386.rpm 60149150858d38ff338bb643584bbc00f2b8b1d2 i386/libxslt-1.1.20-1.fc6.i386.rpm b1e97e7ffe244c0501d0eea7c80023032b57b7fe i386/debug/libxslt-debuginfo-1.1.20-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 17 20:37:09 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 17 Jan 2007 15:37:09 -0500 Subject: Fedora Core 6 Test Update: gtk2-2.10.8-1.fc6 Message-ID: <200701172037.l0HKb99J004859@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-096 2007-01-17 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gtk2 Version : 2.10.8 Release : 1.fc6 Summary : The GIMP ToolKit (GTK+), a library for creating GUIs for X Description : GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off tools to complete application suites. --------------------------------------------------------------------- Update Information: The latest stable upstream release of GTK+ fixes a large number of bugs. --------------------------------------------------------------------- * Wed Jan 17 2007 Matthias Clasen - 2.10.8-1 - Update to 2.10.8 * Thu Dec 21 2006 Matthias Clasen - 2.10.4-10 - Make gdk_pixbuf_loader_close() idempotent - Always emit the closed signal when the loader is closed * Thu Dec 21 2006 Matthias Clasen - 2.10.4-9 - Make update scripts handle slight variations in $host --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 727f3e1ce6d27f180c8ac887e53d32f2eac99b3e SRPMS/gtk2-2.10.8-1.fc6.src.rpm 727f3e1ce6d27f180c8ac887e53d32f2eac99b3e noarch/gtk2-2.10.8-1.fc6.src.rpm 177f8aaa6cbab2578c3667f1b5b3cd328d7824d9 ppc/gtk2-2.10.8-1.fc6.ppc.rpm 01a54d1101f3ae274f97f183bf953a2638713c5a ppc/debug/gtk2-debuginfo-2.10.8-1.fc6.ppc.rpm 778e74822a50c091047b3009ae9b2b5cf958fec7 ppc/gtk2-devel-2.10.8-1.fc6.ppc.rpm fe36eee2c8a9b5858d104541e56eb101dc33cb9d x86_64/debug/gtk2-debuginfo-2.10.8-1.fc6.x86_64.rpm 7d54777f4c4b13c93c081a74f9c8b644ee8e26db x86_64/gtk2-2.10.8-1.fc6.x86_64.rpm cc703713bbca08ad7a41386df99a08df9b02750a x86_64/gtk2-devel-2.10.8-1.fc6.x86_64.rpm 911ae0aee84c405ea95adcc2c521f3ca5732a270 i386/debug/gtk2-debuginfo-2.10.8-1.fc6.i386.rpm 3ae35a0465389a2f4afea683000757ea5412937e i386/gtk2-devel-2.10.8-1.fc6.i386.rpm 2afe31c742912a5a974a8aee0d29664fad17ef3f i386/gtk2-2.10.8-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From ikent at redhat.com Wed Jan 17 20:39:21 2007 From: ikent at redhat.com (Ian Kent) Date: Wed, 17 Jan 2007 15:39:21 -0500 Subject: Fedora Core 6 Test Update: autofs-5.0.1-0.rc3.8 Message-ID: <200701172039.l0HKdL0V005511@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-098 2007-01-17 --------------------------------------------------------------------- Product : Fedora Core 6 Name : autofs Version : 5.0.1 Release : 0.rc3.8 Summary : A tool for automatically mounting and unmounting filesystems Description : autofs is a daemon which automatically mounts filesystems when you use them, and unmounts them later when you are not using them. This can include network filesystems, CD-ROMs, floppies, and so forth. --------------------------------------------------------------------- * Wed Jan 17 2007 Ian Kent - 5.0.1-0.rc3.8 - fix another expire regression introduced in the "mitigate manual umount" patch (bz 222872). - replace patch 3 with rc3 variant instead of the rc2 one. * Mon Jan 15 2007 Ian Kent - 5.0.1-0.rc3.6 - ignore "winbind" if it appears in "automount" nsswitch.conf (bz 214632). * Wed Jan 10 2007 Ian Kent - 5.0.1-0.rc3.4 - remove fullstop from Summary tag. - change Buildroot to recommended form. - replace Prereq with Requires. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 6971b2aaebe8190ce86791a90bc9b24dfd5ca503 SRPMS/autofs-5.0.1-0.rc3.8.src.rpm 6971b2aaebe8190ce86791a90bc9b24dfd5ca503 noarch/autofs-5.0.1-0.rc3.8.src.rpm 7d0d7c08c599a590a9faab91ac853c7b45b18d36 ppc/autofs-5.0.1-0.rc3.8.ppc.rpm c965be44a170a63c4d87b36f1ed2ebace56598f8 ppc/debug/autofs-debuginfo-5.0.1-0.rc3.8.ppc.rpm 60174ac1c7901dd5d4bcac704e75fb43545efadb x86_64/autofs-5.0.1-0.rc3.8.x86_64.rpm f3057359013fc7872a6dac3b2a85332798528f59 x86_64/debug/autofs-debuginfo-5.0.1-0.rc3.8.x86_64.rpm 97c06b18d80f6bc7cad572fa29d74c8a57671328 i386/debug/autofs-debuginfo-5.0.1-0.rc3.8.i386.rpm 1e80d53706d9d9b65e04f1f9dc894c5c052793b7 i386/autofs-5.0.1-0.rc3.8.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From marian_kopala at wp.pl Wed Jan 17 21:34:52 2007 From: marian_kopala at wp.pl (Marian Kopala) Date: Wed, 17 Jan 2007 22:34:52 +0100 Subject: The application file-roller has crashed Message-ID: <1169069692.8342.4.camel@amigos> 1) rpm -q file-roller file-roller-2.17.5-1.fc7 2) $ file-roller GTK Accessibility Module initialized Bonobo accessibility support initialized *** glibc detected *** file-roller: munmap_chunk(): invalid pointer: 0x08a6b940 *** Marian From michal at harddata.com Wed Jan 17 21:43:45 2007 From: michal at harddata.com (Michal Jaegermann) Date: Wed, 17 Jan 2007 14:43:45 -0700 Subject: warning - gtk2 from 20070117 really breaks gnome panel Message-ID: <20070117214345.GA16703@mail.harddata.com> If you will install gtk2-2.10.8-1.fc7 then you are likely to see something like either *** glibc detected *** gnome-panel: free(): invalid next size (normal): 0x0000000000b2e110 *** or *** glibc detected *** gnome-panel: double free or corruption (!prev): 0x0000000000b38110 *** and gnome-panel bombs. Makes hard to leave a session and if you are unlucky you may be left with _two_ gnome-panels among saved clients; which makes for an "interesting" startup next time. :-) There is already https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=223003 with an annotation "Fixed in gtk2-2.10.8-2.fc7" but for now your best bet is not to update gtk2 or back off to gtk2-2.10.7-2.fc7. Michal From michal at harddata.com Wed Jan 17 21:48:28 2007 From: michal at harddata.com (Michal Jaegermann) Date: Wed, 17 Jan 2007 14:48:28 -0700 Subject: The application file-roller has crashed In-Reply-To: <1169069692.8342.4.camel@amigos> References: <1169069692.8342.4.camel@amigos> Message-ID: <20070117214828.GB16703@mail.harddata.com> On Wed, Jan 17, 2007 at 10:34:52PM +0100, Marian Kopala wrote: > > 2) $ file-roller > > GTK Accessibility Module initialized > Bonobo accessibility support initialized > *** glibc detected *** file-roller: munmap_chunk(): > invalid pointer: 0x08a6b940 *** Quite like the same gtk2-2.10.8-1.fc7, I was writing about a minute ago, is responsible. file-roller is using libgtk-x11-2.0.so.0 Michal From gmaxwell at gmail.com Wed Jan 17 15:34:00 2007 From: gmaxwell at gmail.com (Gregory Maxwell) Date: Wed, 17 Jan 2007 10:34:00 -0500 Subject: Kernel-2.6.20-rc* In-Reply-To: References: Message-ID: On 1/17/07, Justin Conover wrote: > Dave Jones, > > Do you know when you will be building a kernel off of that? > > I'm interested in rc2 and beyond > > http://uwsg.iu.edu/hypermail/linux/kernel/0612.3/0000.html > > I was wanting to test the Novatel U720 > > Eric Smith (1): > usb serial: add support for Novatel S720/U720 CDMA/EV-DO modems > > http://marc2.theaimsgroup.com/?l=linux-mm-commits&m=116577893917749&q=raw Even without the updated kernel you can instruct usbserial to talk to the device manually: modprobe usbserial product=0?2110 vendor=0?1410 Let me know if you get it working. I just recieved one of these too, but since it doesn't appear possible to perform first time activation of the device without Microsoft Windows, I'm considering sending it back. From buildsys at redhat.com Thu Jan 18 08:04:09 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Thu, 18 Jan 2007 03:04:09 -0500 Subject: rawhide report: 20070118 changes Message-ID: <200701180804.l0I849hu006713@hs20-bc2-6.build.redhat.com> New package libthai Thai language support routines Updated Packages: autofs-1:5.0.1-0.rc3.9 ---------------------- * Wed Jan 17 2007 Ian Kent - 5.0.1-0.rc3.9 - fix another expire regression introduced in the "mitigate manual umount" patch (bz 222872). compiz-0.3.6-1.fc7 ------------------ * Tue Jan 16 2007 Kristian H??gsberg - 0.3.6-1 - Update to 0.3.6, update patches. - Drop autotool build requires. - Drop glfinish.patch, cow.patch, resize-offset.patch and icon-menu-patch. - Add libdecoration.so - Update to desktop-effects-0.7.0, which spawns the right decorator and plays nicely with unknown plugins. device-mapper-1.02.15-1.fc7 --------------------------- * Wed Jan 17 2007 Alasdair Kergon - 1.02.15-1 - Add basic reporting functions to libdevmapper. dialog-1.0.20060221-1 --------------------- * Wed Jan 17 2007 Harald Hoyer - 1.0.20060221-1 - version 1.0-20060221 fonts-indic-2.1.2-1.fc7 ----------------------- * Thu Jan 18 2007 Parag Nemade - 2.1.2-1 - Resolved Bugs from Parag Nemade - Bug 222407: [or_IN] [fonts-indic] - One GSUB Conjunct is not appearing with its correct shape - Bug 206434: [ml_IN] Digits are appearing in English instead of malayalam - Priority C - Bug 215894: Relative height of 0x0901 (and 0x0902) on 0x0915 is different than other devnagari characters (hi_IN, mr_IN) - Bug 222408: [te_IN] [fonts-indic] - Danda and Double Danda to be implemented with 0964 && 0965 - Bug 222409: [kn_IN] [fonts-indic] - Danda and Double Danda to be implemented with 0964 && 0965 - Bug 221384: [kn_IN] - shape of ra (U+0CB0) is not corret in combined character (below base) - Added AUTHORS,README to %doc freetype-2.3.0-1.fc7 -------------------- * Wed Jan 17 2007 Behdad Esfahbod 2.3.0-1 - Update to 2.3.0. - Drop upstream patches. - Drop -fno-strict-aliasing, it should just work. - Fix typo in ftconfig.h generation. glibc-2.5.90-15 --------------- * Wed Jan 17 2007 Jakub Jelinek 2.5.90-15 - fix NIS getservbyname when proto is NULL - fix nss_compat +group handling (#220658) - cache services in nscd - fix double free in fts_close (#222089) - fix vfork+execvp memory leak (#221187) - soft-fp fixes (BZ#2749) - further strtod fixes (BZ#3855) - make sure pthread_kill doesn't return EINVAL even if the target thread exits in between pthread_kill ESRCH check and the actual tgkill syscall (#220420) - fix ABBA deadlock possibility in ld.so scope locking code gmp-4.1.4-11 ------------ * Wed Jan 17 2007 Jakub Jelinek 4.1.4-11 - make sure libmpfr.a doesn't contain SSE2 instructions on i?86 (#222371) - rebase to mpfr 2.2.1 from 2.2.0 + cumulative fixes gstreamer-plugins-good-0.10.5-1.fc7 ----------------------------------- * Wed Jan 17 2007 Matthias Clasen - 0.10.5-1 - Update to 0.10.5 gtk2-2.10.8-2.fc7 ----------------- * Wed Jan 17 2007 Matthias Clasen - 2.10.8-2 - Fix a crash in the recent-files menu code. ipsec-tools-0.6.6-1 ------------------- * Wed Jan 17 2007 Harald Hoyer - 0.6.6-1 - version 0.6.6 libXfont-1.2.6-2.fc7 -------------------- * Wed Jan 17 2007 Kristian H??gsberg 1.2.6-2 - Add built-in-scalable.patch to prevent crash when trying to scale built-in bitmap fonts. * Fri Jan 05 2007 Adam Jackson 1.2.6-1 - Update to 1.2.6 * Fri Dec 01 2006 Adam Jackson 1.2.5-1 - Update to 1.2.5 from upstream. Drops CID font support. libselinux-1.33.6-1.fc7 ----------------------- * Wed Jan 17 2007 Dan Walsh - 1.33.6-1 - Upgrade to upstream * Merged man page updates to make "apropos selinux" work from Dan Walsh. libxslt-1.1.20-1 ---------------- * Wed Jan 17 2007 Daniel Veillard - upstream release 1.1.20 see http://xmlsoft.org/XSLT/news.html logwatch-7.3.2-4.fc7 -------------------- * Wed Jan 17 2007 Ivana Varekova 7.3.2-4 - add xntpd patch lvm2-2.02.19-1.fc7 ------------------ * Wed Jan 17 2007 Alasdair Kergon - 2.02.19-1 - Fix a segfault if an empty config file section encountered. - Fix partition table processing after sparc changes. - Fix cmdline PE range processing segfault. - Move basic reporting functions into libdevmapper. * Fri Jan 12 2007 Alasdair Kergon - 2.02.18-2 - Rebuild. * Thu Jan 11 2007 Alasdair Kergon - 2.02.18-1 - Use CFLAGS when linking so mixed sparc builds can supply -m64. - Prevent permission changes on active mirrors. - Print warning instead of error message if lvconvert cannot zero volume. - Add snapshot options to lvconvert man page. - dumpconfig accepts a list of configuration variables to display. - Change dumpconfig to use --file to redirect output to a file. - Avoid vgreduce error when mirror code removes the log LV. - Fix ambiguous vgsplit error message for split LV. - Fix lvextend man page typo. - Use no flush suspending for mirrors. - Fix create mirror with name longer than 22 chars. m17n-db-1.3.4-4.fc7 ------------------- * Wed Jan 17 2007 Mayank Jain - Added Patch 4 as number_pad_itrans-222634.patch for adding number pad support in itrans keymaps - Added number pad support in all indic keymaps except tamil as they used english numerals. - Resolves bug : 222634 m2crypto-0.17-1 --------------- * Wed Jan 17 2007 Miloslav Trmac - 0.17-1 - Update to m2crypto-0.17 - Update for Python 2.5 * Thu Dec 07 2006 Miloslav Trmac - 0.16-8 - Rebuild with updated build tools to avoid DT_TEXTREL on s390x Resolves: #218578 metacity-2.17.5-1.fc7 --------------------- * Wed Jan 17 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 policycoreutils-1.33.15-1.fc7 ----------------------------- * Wed Jan 17 2007 Dan Walsh 1.33.15-1 - Update to upstream * Merged unicode-to-string fix for seobject audit from Dan Walsh. * Merged man page updates to make "apropos selinux" work from Dan Walsh. pykickstart-0.91-1.fc7 ---------------------- * Wed Jan 17 2007 Chris Lumens - 0.91-1 - Add a method to read kickstart files from strings. rpm-4.4.2-39.fc7 ---------------- * Wed Jan 17 2007 Deepak Bhole 4.4.2-39.fc7 - Added a missing BR for elfutils-libelf-devel-static (needed for -lelf) squirrelmail-1.4.8-3.fc6 ------------------------ * Mon Jan 15 2007 Warren Togami 1.4.8-3 - CVE-2006-6142 syslinux-3.31-1 --------------- * Wed Jan 17 2007 Jeremy Katz - 3.31-1 - update to 3.31 system-config-services-0.9.4-1.fc7 ---------------------------------- * Wed Dec 06 2006 Harald Hoyer - 0.9.4 - fixed service start/stop (#218429) - translation update (#216558) - Resolves: rhbz#216558, rhbz#218429 * Fri Nov 24 2006 Nils Philippsen - 0.9.3 - pick up updated translations (#216558) totem-2.17.5-1.fc7 ------------------ * Tue Jan 16 2007 Matthias Clasen - 2.17.5-1 - Update to 2.17.5 vixie-cron-4:4.1-70.fc7 ----------------------- * Tue Jan 16 2007 Marcela Maslanova - 4:4.1-70 - change in manual Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From cervajs at fpf.slu.cz Thu Jan 18 09:20:51 2007 From: cervajs at fpf.slu.cz (marek cervenka) Date: Thu, 18 Jan 2007 10:20:51 +0100 (CET) Subject: fedora core - www.ltsp.org Message-ID: hi, are there some pre-release rpms of ltsp-5 for fc6/7? (or tarball) i have problem with national(czech republic) keyboard via xkb (probably xorg 7.1(fc6) vs xorg 6.8(ltsp-4.2) problem) this http://wiki.ltsp.org/twiki/bin/view/Ltsp/TroubleShooting#Problems_with_the_keyboard doesnt help note from http://wiki.ltsp.org/twiki/bin/view/Ltsp/Ltsp5Status Fedora not supported Work is being done to provide LTSP-5 in Fedora Core 7 who is working on it? thanks --------------------------------------- Marek Cervenka Centrum Vypocetni Techniky CVT - http://cvt.fpf.slu.cz FPF SLU OPAVA - http://www.fpf.slu.cz LCNA - http://lcna.slu.cz ======================================= From netwiz at crc.id.au Thu Jan 18 10:27:53 2007 From: netwiz at crc.id.au (Steven Haigh) Date: Thu, 18 Jan 2007 21:27:53 +1100 Subject: Upgrading FC6 -> Rawhide. Message-ID: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> Hi all, I'm trying to upgrade a new and fully updated FC6 laptop to rawhide for testing, however when I try and run 'yum upgrade' or 'yum update' I get the following: --> Running transaction check --> Processing Dependency: python-elementtree for package: yum --> Processing Dependency: python(abi) = 2.4 for package: yum --> Processing Dependency: firstboot-tui = 1.4.28 for package: firstboot --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package firstboot-tui.noarch 0:1.4.28-2.fc7 set to be updated --> Running transaction check --> Processing Dependency: python-elementtree for package: yum --> Processing Dependency: python(abi) = 2.4 for package: yum --> Finished Dependency Resolution Error: Missing Dependency: python(abi) = 2.4 is needed by package yum Where does this come into it? -- Steven Haigh Email: netwiz at crc.id.au Web: http://www.crc.id.au Phone: (03) 9017 0597 - 0412 935 897 From justin.conover at gmail.com Thu Jan 18 10:33:36 2007 From: justin.conover at gmail.com (Justin Conover) Date: Thu, 18 Jan 2007 04:33:36 -0600 Subject: Kernel-2.6.20-rc* In-Reply-To: References: Message-ID: On 1/17/07, Gregory Maxwell wrote: > > On 1/17/07, Justin Conover wrote: > > Dave Jones, > > > > Do you know when you will be building a kernel off of that? > > > > I'm interested in rc2 and beyond > > > > http://uwsg.iu.edu/hypermail/linux/kernel/0612.3/0000.html > > > > I was wanting to test the Novatel U720 > > > > Eric Smith (1): > > usb serial: add support for Novatel S720/U720 CDMA/EV-DO modems > > > > > http://marc2.theaimsgroup.com/?l=linux-mm-commits&m=116577893917749&q=raw > > > Even without the updated kernel you can instruct usbserial to talk to > the device manually: > modprobe usbserial product=0?2110 vendor=0?1410 > > Let me know if you get it working. I just recieved one of these too, > but since it doesn't appear possible to perform first time activation > of the device without Microsoft Windows, I'm considering sending it > back. > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list > modprobe usbserial product=0?2110 vendor=0?1410 Jan 18 04:31:40 echelon kernel: usbcore: registered new interface driver usbserial Jan 18 04:31:40 echelon kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic Jan 18 04:31:40 echelon kernel: usbcore: registered new interface driver usbserial_generic Jan 18 04:31:40 echelon kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core I was able to register mine with windows, because well, I work for Sprint and they give me a windows laptop, I just use it for work and everything else I use is some sort of *nix ;) -------------- next part -------------- An HTML attachment was scrubbed... URL: From david at lovesunix.net Thu Jan 18 16:33:12 2007 From: david at lovesunix.net (David Nielsen) Date: Thu, 18 Jan 2007 17:33:12 +0100 Subject: Upgrading FC6 -> Rawhide. In-Reply-To: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> References: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> Message-ID: <1169137992.3267.6.camel@dawkins> tor, 18 01 2007 kl. 21:27 +1100, skrev Steven Haigh: > Hi all, > > I'm trying to upgrade a new and fully updated FC6 laptop to rawhide > for testing, however when I try and run 'yum upgrade' or 'yum update' > I get the following: > > --> Running transaction check > --> Processing Dependency: python-elementtree for package: yum > --> Processing Dependency: python(abi) = 2.4 for package: yum > --> Processing Dependency: firstboot-tui = 1.4.28 for package: firstboot > --> Restarting Dependency Resolution with new changes. > --> Populating transaction set with selected packages. Please wait. > ---> Package firstboot-tui.noarch 0:1.4.28-2.fc7 set to be updated > --> Running transaction check > --> Processing Dependency: python-elementtree for package: yum > --> Processing Dependency: python(abi) = 2.4 for package: yum > --> Finished Dependency Resolution > Error: Missing Dependency: python(abi) = 2.4 is needed by package yum > > Where does this come into it? I have a feeling that is because the yum in FC6 (at least updates-testing) is newer than the one in Rawhide. - David Nielsen -- "Ridicule is the only weapon that can be used against unintelligible propositions. Ideas must be distinct before reason can act upon them.? -Thomas Jefferson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: Dette er en digitalt underskrevet brevdel URL: From jkeating at redhat.com Thu Jan 18 16:38:23 2007 From: jkeating at redhat.com (Jesse Keating) Date: Thu, 18 Jan 2007 11:38:23 -0500 Subject: Upgrading FC6 -> Rawhide. In-Reply-To: <1169137992.3267.6.camel@dawkins> References: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> <1169137992.3267.6.camel@dawkins> Message-ID: <200701181138.23738.jkeating@redhat.com> On Thursday 18 January 2007 11:33, David Nielsen wrote: > > Error: Missing Dependency: python(abi) = 2.4 is needed by package yum > > > > Where does this come into it? > > I have a feeling that is because the yum in FC6 (at least > updates-testing) is newer than the one in Rawhide. Yep. Waiting for upstream yum 3.1, which is rolling in a bunch of patches to the 3.0(.3) version. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From jim at jbsys.com Thu Jan 18 17:02:03 2007 From: jim at jbsys.com (Jim Bevier) Date: Thu, 18 Jan 2007 10:02:03 -0700 Subject: final patch for pata disks on sata promise controller References: <459D86C2.4080006@jbsys.com> <20070105001831.GF17816@redhat.com> <004001c73674$6e7c3ad0$0a01a8c0@jbsys> <001801c73850$5fcb8120$0a01a8c0@jbsys> <20070115134639.GR31287@devserv.devel.redhat.com> Message-ID: <007401c73b22$60ba2fd0$0a01a8c0@jbsys> ----- Original Message ----- From: "Jeff Garzik" To: "Jim Bevier" Cc: "Dave Jones" ; Sent: Monday, January 15, 2007 6:46 AM Subject: Re: final patch for pata disks on sata promise controller > On Sun, Jan 14, 2007 at 07:53:45PM -0700, Jim Bevier wrote: >> I found a couple of e-mails on the web from jeff at garzik.org signing off >> on >> sata_promise patches to gentoo users. It is slightly modified from the >> patch that I sent to you last week. I merged my mods with those and now >> have "the last" patch. This patch should allow pata disks on models >> 2037x >> and 2057x sata promise controllers. This should allow the same >> functionally as pre 2.6.19 kernels. I have tested it on the 2911 kernel. >> I am sorry Jeff chose to not include the gentoo patch in the current >> fedora >> libata releases. I have credited the gentoo people who generated the >> patch >> in the attached patch. How about including it in the next kernel >> release? > > I thought I already replied to you? > > The support you want is in libata-dev.git#upstream repository. > > Those patches you are attaching are old. > > Jeff > I looked at the 'new' patch in the upstream libata-dev.git and it is better than the one I have been using. It restricts the changes to just the sata_promise.c module. So, when is this 'new' patch going to show up in a rawhide kernel? Or do I have to continue patching the kernel while waiting (insert time value here) for the changes to be sent to Dave? Jim From netwiz at crc.id.au Thu Jan 18 22:41:12 2007 From: netwiz at crc.id.au (Steven Haigh) Date: Fri, 19 Jan 2007 09:41:12 +1100 Subject: Upgrading FC6 -> Rawhide. In-Reply-To: <200701181138.23738.jkeating@redhat.com> References: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> <1169137992.3267.6.camel@dawkins> <200701181138.23738.jkeating@redhat.com> Message-ID: On 19/01/2007, at 3:38 AM, Jesse Keating wrote: > On Thursday 18 January 2007 11:33, David Nielsen wrote: >>> Error: Missing Dependency: python(abi) = 2.4 is needed by package >>> yum >>> >>> Where does this come into it? >> >> I have a feeling that is because the yum in FC6 (at least >> updates-testing) is newer than the one in Rawhide. > > Yep. Waiting for upstream yum 3.1, which is rolling in a bunch of > patches to > the 3.0(.3) version. Is there a way I can make the update happen anyhow without downgrading yum? I did see something a while back about the --skip-broken (i think) option, however I can't seem to see this option available. -- Steven Haigh Email: netwiz at crc.id.au Web: http://www.crc.id.au Phone: (03) 9017 0597 - 0412 935 897 From sundaram at fedoraproject.org Thu Jan 18 23:07:05 2007 From: sundaram at fedoraproject.org (Rahul Sundaram) Date: Fri, 19 Jan 2007 04:37:05 +0530 Subject: Upgrading FC6 -> Rawhide. In-Reply-To: References: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> <1169137992.3267.6.camel@dawkins> <200701181138.23738.jkeating@redhat.com> Message-ID: <45AFFD99.4080204@fedoraproject.org> Steven Haigh wrote: > On 19/01/2007, at 3:38 AM, Jesse Keating wrote: >> On Thursday 18 January 2007 11:33, David Nielsen wrote: >>>> Error: Missing Dependency: python(abi) = 2.4 is needed by package yum >>>> >>>> Where does this come into it? >>> >>> I have a feeling that is because the yum in FC6 (at least >>> updates-testing) is newer than the one in Rawhide. >> >> Yep. Waiting for upstream yum 3.1, which is rolling in a bunch of >> patches to >> the 3.0(.3) version. > > Is there a way I can make the update happen anyhow without downgrading yum? > > I did see something a while back about the --skip-broken (i think) > option, however I can't seem to see this option available. That is part of the yum-skip-broken plugin in Fedora Extras. Rahul From buildsys at redhat.com Fri Jan 19 08:12:16 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Fri, 19 Jan 2007 03:12:16 -0500 Subject: rawhide report: 20070119 changes Message-ID: <200701190812.l0J8CG9V019432@hs20-bc2-6.build.redhat.com> Updated Packages: PyQt-3.17-3 ----------- * Thu Jan 18 2007 Than Ngo - 3.17-3 - rebuilt anaconda-11.2.0.12-1 -------------------- * Thu Jan 18 2007 Jeremy Katz - 11.2.0.12-1 - Fix so that package selection in the yum backend is actually enabled - UI tweaks so that we work better with a real window manager - Ensure that file contexts are reset to the right thing after a live CD copy - Fix another ks.cfg traceback - Make it easier to do a 32bit build on a 64bit host * Thu Jan 18 2007 Jeremy Katz - 11.2.0.11-1 - Add backend for installing from a live CD - Make backend controllable from the installclass - Bring up loopback device in ks (clumens, #191424) - Fix traceback with writing ks.cfg (clumens) - Add support for new vesamenu bits in syslinux - Allow for updates.img to be a cpioball (dlehman) - Fix use of halt in ks.cfg (pjones, #222953) - Fix traceback in text mode network config (Elliot Peele) autoconf-2.61-3 --------------- * Thu Jan 18 2007 Karsten Hopp 2.61-3 - don't abort (un)install scriptlets when _excludedocs is set (Ville Skytt??) automake-1.10-3 --------------- * Thu Jan 18 2007 Karsten Hopp 1.10-3 - don't abort (un)install scriptlets when _excludedocs is set (Ville Skytt??) * Tue Nov 21 2006 Karsten Hopp 1.10-2 - rebuild * Fri Nov 10 2006 Karsten Hopp 1.10-1 - automake 1.10 dump-0.4b41-3.fc7 ----------------- * Thu Jan 18 2007 Adam Tkac 0.4b41-3.fc7 - dump is now linked dynamically - removed termcap dependency ed-0.3-3 -------- * Thu Jan 18 2007 Karsten Hopp 0.3-3 - don't abort (un)install scriptlets when _excludedocs is set (Ville Skytt??) * Thu Jan 18 2007 Karsten Hopp 0.3-2 - fix man page permissions (#222581) fbset-2.1-24.fc7 ---------------- * Thu Jan 18 2007 Jindrich Novy - 2.1-24 - add dist tag, minor rpmlint fix fedora-logos-6.0.90-1.fc7 ------------------------- * Thu Jan 18 2007 Jeremy Katz - 6.0.90-1 - add syslinux splash for use with graphical menu firefox-2.0.0.1-3.fc7 --------------------- * Thu Jan 18 2007 Christopher Aillon 2.0.0.1-3 - Remove the XLIB_SKIP_ARGB_VISUALS=1 workaround; the plugin got fixed. freetype-2.3.0-2.fc7 -------------------- * Wed Jan 17 2007 Behdad Esfahbod 2.3.0-2 - Add without_subpixel_rendering. - Drop X11_PATH=/usr. Not needed anymore. gaim-2:2.0.0-0.29.beta5.fc7 --------------------------- * Thu Jan 18 2007 Warren Togami - 2:2.0.0-0.29.beta5 - Debian patch 17_upnp_crash - Debian patch 18_jabber-roster-crash ghostscript-8.15.3-5.fc7 ------------------------ * Thu Jan 18 2007 Tim Waugh 8.15.3-5 - Backported gxcht 64bit crash fix from GPL trunk (bug #177763). gphoto2-2.3.1-3.fc7 ------------------- * Thu Jan 18 2007 Jindrich Novy 2.3.1-3 - gphoto2-devel requires libusb-devel (#222015) libthai-0.1.7-4.fc7 ------------------- * Wed Jan 17 2007 Behdad Esfahbod 0.1.7-4 - Patch libthai.pc.in to not require datrie. pango-1.15.4-5.fc7 ------------------ * Thu Jan 18 2007 Behdad Esfahbod - 1.15.4-5 - Again... HELLO.txt is moved. * Thu Jan 18 2007 Behdad Esfahbod - 1.15.4-4 - Bump again. I accidentally tagged 1.15.3-4 as 1.15.4-3 previously :(. * Thu Jan 18 2007 Behdad Esfahbod - 1.15.4-3 - s/HELLO.utf8/HELLO.txt/ to match upstream. sip-4.5.2-1 ----------- * Thu Jan 18 2007 Than Ngo - 4.5.2-1 - 4.5.2 symlinks-1.2-25.fc7 ------------------- * Thu Jan 18 2007 Tim Waugh 1.2-25 - Build with LFS support (bug #206407). tzdata-2007a-1.fc7 ------------------ * Thu Jan 18 2007 Petr Machata - 2007a-1 - Upstream 2007a - Updates to Bahamas, they will be in sync with 2007 US DST change - New zone Australia/Eucla - Africa/Asmera renamed to Africa/Asmara, link created - Atlantic/Faeroe renamed to Atlantic/Faroe, link created - Packaging - Adding BuildRequires: glibc-common >= 2.5.90-7 to build tzdata with extended 64-bit format necessary for dates beyond 2037 vsftpd-2.0.5-12.fc7 ------------------- * Thu Jan 18 2007 Radek Vok??l - 2.0.5-12 - add dist tag - add buildrequires tcp_wrappers-devel * Wed Jan 17 2007 Maros Barabas - 2.0.5-11 - add errno EACCES to not die by vsf_sysutil_bind - Resolves #198677 * Thu Dec 14 2006 Maros Barabas - 2.0.5-10 - correct man (5) pages - Resolves: #216765 - correct calling function stat - Resolves: bz200763 wget-1.10.2-12.fc7 ------------------ * Thu Jan 18 2007 Karsten Hopp 1.10.2-12 - don't abort (un)install scriptlets when _excludedocs is set (Ville Skytt??) xterm-223-2.fc7 --------------- * Thu Jan 18 2007 Miroslav Lichvar 223-2 - make xterm binary sgid utempter (#222847) - fix font size changes with -fa option (#222340) - fix redrawing of internal border (#223027) - enable metaSendsEscape resource and set modifyFunctionKeys to 0 by default Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From netwiz at crc.id.au Sat Jan 20 01:33:38 2007 From: netwiz at crc.id.au (Steven Haigh) Date: Sat, 20 Jan 2007 12:33:38 +1100 Subject: Yum metadata mismatches... Message-ID: <20070120123338.2ozl7expuskgwo0s@zeus.crc.id.au> Trying to upgrade from FC6 (still) and now getting: ]# yum -y update Loading "installonlyn" plugin Loading "skip-broken" plugin Setting up Update Process Setting up repositories extras-development 100% |=========================| 1.1 kB 00:00 development 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files primary.xml.gz 100% |=========================| 1.3 MB 00:57 http://download.fedora.redhat.com/pub/fedora/linux/extras/development/i386/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum Trying other mirror. Error: failure: repodata/primary.xml.gz from extras-development: [Errno 256] No more mirrors to try. Ideas? -- Steven Haigh Email: netwiz at crc.id.au Web: http://www.crc.id.au Phone: (03) 9017 0597 - 0412 935 897 From jkeating at redhat.com Sat Jan 20 03:37:38 2007 From: jkeating at redhat.com (Jesse Keating) Date: Fri, 19 Jan 2007 22:37:38 -0500 Subject: Yum metadata mismatches... In-Reply-To: <20070120123338.2ozl7expuskgwo0s@zeus.crc.id.au> References: <20070120123338.2ozl7expuskgwo0s@zeus.crc.id.au> Message-ID: <200701192237.41525.jkeating@redhat.com> On Friday 19 January 2007 20:33, Steven Haigh wrote: > checksum > Trying other mirror. > Error: failure: repodata/primary.xml.gz from extras-development: ? > [Errno 256] No more mirrors to try. There was some corruption happening on the master mirror side. I do believe we've corrected this and the mirrors should be getting the right repodata again. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From ernesto at ornl.gov Sat Jan 20 04:12:29 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Fri, 19 Jan 2007 23:12:29 -0500 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG Message-ID: <1169266349.3979.1.camel@panther> Hi After updating the kernel wireless no longer works: [root at panther ~]# modprobe ipw3945; ipw3945d FATAL: Module ipw3945 not found. 2007-01-19 23:10:49: ERROR: Could not find Intel PRO/Wireless 3945ABG Network Connection [1]+ Done system-config-network ipw3945d - regulatory daemon Copyright (C) 2005-2006 Intel Corporation. All rights reserved. version: 1.7.22 2007-01-19 23:10:49: ERROR: Could not find Intel PRO/Wireless 3945ABG Network Connection [root at panther ~]# uname -a Linux panther 2.6.19-1.2895.fc6 #1 SMP Wed Jan 10 18:50:56 EST 2007 x86_64 x86_64 x86_64 GNU/Linux Any ideas? Thanks, Ernest From drago01 at gmail.com Sat Jan 20 07:37:46 2007 From: drago01 at gmail.com (dragoran) Date: Sat, 20 Jan 2007 08:37:46 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169266349.3979.1.camel@panther> References: <1169266349.3979.1.camel@panther> Message-ID: <45B1C6CA.10900@gmail.com> Ernest L. Williams Jr. wrote: > Hi > > After updating the kernel wireless no longer works: > > > [root at panther ~]# modprobe ipw3945; ipw3945d > FATAL: Module ipw3945 not found. > 2007-01-19 23:10:49: ERROR: Could not find Intel PRO/Wireless 3945ABG > Network Connection > [1]+ Done system-config-network > ipw3945d - regulatory daemon > Copyright (C) 2005-2006 Intel Corporation. All rights reserved. > version: 1.7.22 > 2007-01-19 23:10:49: ERROR: Could not find Intel PRO/Wireless 3945ABG > Network Connection > [root at panther ~]# uname -a > Linux panther 2.6.19-1.2895.fc6 #1 SMP Wed Jan 10 18:50:56 EST 2007 > x86_64 x86_64 x86_64 GNU/Linux > > > > Any ideas? > > you need to build and install the ipw3945 module. http://ipw3945.sf.net > > Thanks, > Ernest > > From per at bothner.com Sat Jan 20 07:45:50 2007 From: per at bothner.com (Per Bothner) Date: Fri, 19 Jan 2007 23:45:50 -0800 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <45B1C6CA.10900@gmail.com> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> Message-ID: <45B1C8AE.1020106@bothner.com> dragoran wrote: > you need to build and install the ipw3945 module. > http://ipw3945.sf.net Ernest may have been using ipw3945 rpms from atrpms.net. They're not always immediately updated, though there seems to be new modules for kernel 2895 as of today. Though last time I updated, it didn't work for me, even though I had updated to a matching kernel module. Hopefully, FC7 will have "wireless that just works" for ipw3945 ... -- --Per Bothner per at bothner.com http://per.bothner.com/ From buildsys at redhat.com Sat Jan 20 11:27:58 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sat, 20 Jan 2007 06:27:58 -0500 Subject: rawhide report: 20070120 changes Message-ID: <200701201127.l0KBRwLc007330@hs20-bc2-6.build.redhat.com> Updated Packages: alsa-lib-1.0.14-0.2.rc2.fc7 --------------------------- * Fri Jan 19 2007 Martin Stransky 1.0.14-0.2.rc2 - new upstream alsa-utils-1.0.14-0.3.rc2.fc7 ----------------------------- * Fri Jan 19 2007 Martin Stransky 1.0.14-0.3.rc2 - new upstream anaconda-11.2.0.13-1 -------------------- * Fri Jan 19 2007 Chris Lumens - 11.2.0.13-1 - Kickstart and upgrade are no longer installclasses. - Update x86_64 syslinux config (katzj). - Support %packages --default (#221305). - Fix early kickstart UI traceback. - Remove cruft in x86 images (katzj). - Fix error handling in loader netconfig screen (dcantrell). - Add libthai to graphical install (katzj). autofs-1:5.0.1-0.rc3.11 ----------------------- * Thu Jan 18 2007 Ian Kent - 5.0.1-0.rc3.11 - correct check for busy offset mounts before offset umount (bz 222872). bash-3.2-3.fc7 -------------- * Fri Jan 19 2007 Tim Waugh 3.2-3 - Back out rmatch change introduced in 3.2 (bug #220087). coreutils-6.7-2.fc7 ------------------- * Fri Jan 19 2007 Tim Waugh 6.7-2 - Build does not require libtermcap-devel. docbook-style-xsl-1.71.1-2.fc7 ------------------------------ * Fri Jan 19 2007 Tomas Mraz 1.71.1-2 - Add new wordml and especially highlighting (which is referenced from html) subdirs to Makefile. * Fri Jan 19 2007 Tim Waugh 1.71.1-1 - 1.71.1. No longer seem to need lists patch. Removed out of date sp patch. eclipse-cdt-1:3.1.1-7.fc7 ------------------------- * Wed Jan 17 2007 Jeff Johnston 3.1.1-7 - Resolves: #222350 - Rebase autotools to 0.0.6.1 source. - Add comments. - Put arch-specific jars in library dir. * Mon Dec 11 2006 Jeff Johnston 3.1.1-6 - Rebase autotools to 0.0.6 source. * Wed Nov 15 2006 Jeff Johnston 3.1.1-5 - Add cppunit support. festival-1.95-6.fc7 ------------------- * Fri Jan 19 2007 Miroslav Lichvar - 1.95-6 - link with ncurses - add dist tag - make scriptlets safer gok-1.2.1-2.fc7 --------------- * Fri Jan 19 2007 Matthias Clasen - 1.2.1-2 - Update to 1.2.1 hunspell-1.1.4-5.fc7 -------------------- * Fri Jan 19 2007 Caolan McNamara - 1.1.4-5 - .pc icu-3.6-15 ---------- * Fri Jan 19 2007 Caolan McNamara - 3.6-15 - Resolves: rhbz#214948 icu.icu5506.multiplevowels.patch lftp-3.5.9-1.fc7 ---------------- * Thu Jan 18 2007 Maros Barabas - 3.5.9 - Upgrade to 3.5.9 from upstream libdv-0:1.0.0-1.fc7 ------------------- * Fri Jan 19 2007 Jarod Wilson 1.0.0-1 - New upstream release - PIC patch from Mike Frysinger (#146596) - Re-enable asm on i386 * Thu Sep 21 2006 Jarod Wilson 0.104-5 - Disable asm on i386 for now to prevent text relocations in DSO libselinux-1.34.0-1.fc7 ----------------------- * Fri Jan 19 2007 Dan Walsh - 1.34.0-1 - Upgrade to upstream * Updated version for stable branch. libsepol-1.16.0-1.fc7 --------------------- * Fri Jan 19 2007 Dan Walsh 1.16.0-1 - Upgrade to latest from NSA * Updated version for stable branch. pam-0.99.7.0-1.fc7 ------------------ * Fri Jan 19 2007 Tomas Mraz 0.99.7.0-1 - upgrade to new upstream version - drop pam_stack module as it is obsolete - some changes to silence rpmlint * Tue Jan 16 2007 Tomas Mraz 0.99.6.2-8 - properly include /var/log/faillog and tallylog as ghosts and create them in post script (#209646) - update gmo files as we patch some po files (#218271) - add use_current_range option to pam_selinux (#220487) - improve the role selection in pam_selinux - remove shortcut on Password: in ja locale (#218271) - revert to old euid and not ruid when setting euid in pam_keyinit (#219486) - rename selinux-namespace patch to namespace-level * Fri Dec 01 2006 Dan Walsh 0.99.6.2-7 - fix selection of role parted-1.8.2-2.fc7 ------------------ * Thu Jan 18 2007 David Cantrell - 1.8.2-2 - Preserve starting sector for primary NTFS 3.1 partitions (Windows Vista) when modifying the DOS disk label. NTFS 3.1 partitions do not start on the 2nd head of the 1st cylinder at the beginning of the drive. pinfo-0.6.9-2.fc7 ----------------- * Fri Jan 19 2007 Miroslav Lichvar 0.6.9-2 - use correct group when dropping group privileges (#221107) - open also files without .info suffix - make scriptlets safer - make sure readline support isn't compiled in pykickstart-0.92-1.fc7 ---------------------- * Fri Jan 19 2007 Chris Lumens - 0.92-1 - Fix KickstartVersionError reporting. - Add a version attribute to handler objects. - Fix line number reporting on lots of commands. - Add initial support for Fedora 7 and remove deprecated commands. - Accept a --default argument to the %packages header (#221305). syslinux-3.31-2 --------------- * Thu Jan 18 2007 Jesse Keating - 3.31-2 - Make syslinux own /usr/lib/syslinux. system-config-display-1.0.48-1.fc7 ---------------------------------- * Thu Dec 07 2006 Adam Jackson 1.0.48-1 - Import old driver list code from rhpxl. (#218241) * Wed Dec 06 2006 Adam Jackson 1.0.47-1 - Fail gracefully on machines with no video. vsftpd-2.0.5-13.fc7 ------------------- * Fri Jan 19 2007 Maros Barabas - 2.0.5-13 - add lost patch: don't die when no user config file is present - Resolves #166986 xen-3.0.4-1.fc7 --------------- * Thu Jan 11 2007 Daniel P. Berrange - 3.0.4-1 - Upgrade to official xen-3.0.4_1 release tarball Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From Axel.Thimm at ATrpms.net Sat Jan 20 14:29:16 2007 From: Axel.Thimm at ATrpms.net (Axel Thimm) Date: Sat, 20 Jan 2007 15:29:16 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169266349.3979.1.camel@panther> References: <1169266349.3979.1.camel@panther> Message-ID: <20070120142916.GC25079@neu.nirvana> On Fri, Jan 19, 2007 at 11:12:29PM -0500, Ernest L. Williams Jr. wrote: > After updating the kernel wireless no longer works: > > > [root at panther ~]# modprobe ipw3945; ipw3945d > FATAL: Module ipw3945 not found. > 2007-01-19 23:10:49: ERROR: Could not find Intel PRO/Wireless 3945ABG > Network Connection > [1]+ Done system-config-network > ipw3945d - regulatory daemon > Copyright (C) 2005-2006 Intel Corporation. All rights reserved. > version: 1.7.22 > 2007-01-19 23:10:49: ERROR: Could not find Intel PRO/Wireless 3945ABG > Network Connection > [root at panther ~]# uname -a > Linux panther 2.6.19-1.2895.fc6 #1 SMP Wed Jan 10 18:50:56 EST 2007 > x86_64 x86_64 x86_64 GNU/Linux > > > > Any ideas? Install yum-plugin-kmdl, that will pick up kmdl on kernel upgrades, even after the kernel has been installed. -- Axel.Thimm at ATrpms.net -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From netwiz at crc.id.au Sat Jan 20 15:59:20 2007 From: netwiz at crc.id.au (Steven Haigh) Date: Sun, 21 Jan 2007 02:59:20 +1100 Subject: Upgrading FC6 -> Rawhide. In-Reply-To: <45AFFD99.4080204@fedoraproject.org> References: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> <1169137992.3267.6.camel@dawkins> <200701181138.23738.jkeating@redhat.com> <45AFFD99.4080204@fedoraproject.org> Message-ID: On 19/01/2007, at 10:07 AM, Rahul Sundaram wrote: > Steven Haigh wrote: >> On 19/01/2007, at 3:38 AM, Jesse Keating wrote: >>> On Thursday 18 January 2007 11:33, David Nielsen wrote: >>>>> Error: Missing Dependency: python(abi) = 2.4 is needed by >>>>> package yum >>>>> >>>>> Where does this come into it? >>>> >>>> I have a feeling that is because the yum in FC6 (at least >>>> updates-testing) is newer than the one in Rawhide. >>> >>> Yep. Waiting for upstream yum 3.1, which is rolling in a bunch >>> of patches to >>> the 3.0(.3) version. >> Is there a way I can make the update happen anyhow without >> downgrading yum? >> I did see something a while back about the --skip-broken (i think) >> option, however I can't seem to see this option available. > > That is part of the yum-skip-broken plugin in Fedora Extras. Looks like this still won't work as glib (or glibc?) also depends on dependencies that fall within the updated yum packages. This means without reverting yum back to the rawhide version, it's currently not possible to do an upgrade from FC6 to the current rawhide. A newer version of yum in rawhide would probably fix this. -- Steven Haigh Email: netwiz at crc.id.au Web: http://www.crc.id.au Phone: (03) 9017 0597 - 0412 935 897 From jkeating at redhat.com Sat Jan 20 16:18:12 2007 From: jkeating at redhat.com (Jesse Keating) Date: Sat, 20 Jan 2007 11:18:12 -0500 Subject: Upgrading FC6 -> Rawhide. In-Reply-To: References: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> <45AFFD99.4080204@fedoraproject.org> Message-ID: <200701201118.16134.jkeating@redhat.com> On Saturday 20 January 2007 10:59, Steven Haigh wrote: > Looks like this still won't work as glib (or glibc?) also depends on ? > dependencies that fall within the updated yum packages. This means ? > without reverting yum back to the rawhide version, it's currently not ? > possible to do an upgrade from FC6 to the current rawhide. > > A newer version of yum in rawhide would probably fix this. We're waiting for the the new upstream version of yum. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From netwiz at crc.id.au Sat Jan 20 16:35:44 2007 From: netwiz at crc.id.au (Steven Haigh) Date: Sun, 21 Jan 2007 03:35:44 +1100 Subject: Upgrading FC6 -> Rawhide. In-Reply-To: <200701201118.16134.jkeating@redhat.com> References: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> <45AFFD99.4080204@fedoraproject.org> <200701201118.16134.jkeating@redhat.com> Message-ID: <6E3061A6-21F6-45DD-8E24-3358ABE81B6E@crc.id.au> On 21/01/2007, at 3:18 AM, Jesse Keating wrote: > On Saturday 20 January 2007 10:59, Steven Haigh wrote: >> Looks like this still won't work as glib (or glibc?) also depends on >> dependencies that fall within the updated yum packages. This means >> without reverting yum back to the rawhide version, it's currently not >> possible to do an upgrade from FC6 to the current rawhide. >> >> A newer version of yum in rawhide would probably fix this. > > We're waiting for the the new upstream version of yum. Would it cause any issues downgrading to the rawhide yum? For what reason is the rawhide yum older than the released yum version in the stable/updates area? -- Steven Haigh Email: netwiz at crc.id.au Web: http://www.crc.id.au Phone: (03) 9017 0597 - 0412 935 897 From jkeating at redhat.com Sat Jan 20 16:44:40 2007 From: jkeating at redhat.com (Jesse Keating) Date: Sat, 20 Jan 2007 11:44:40 -0500 Subject: Upgrading FC6 -> Rawhide. In-Reply-To: <6E3061A6-21F6-45DD-8E24-3358ABE81B6E@crc.id.au> References: <20070118212753.gmxs2v25no00cswo@zeus.crc.id.au> <200701201118.16134.jkeating@redhat.com> <6E3061A6-21F6-45DD-8E24-3358ABE81B6E@crc.id.au> Message-ID: <200701201144.40998.jkeating@redhat.com> On Saturday 20 January 2007 11:35, Steven Haigh wrote: > Would it cause any issues downgrading to the rawhide yum? For what ? > reason is the rawhide yum older than the released yum version in the ? > stable/updates area? We had a specific bug we wanted to fix in FC6. Rawhide has some other patches to make it work with python2.5, and juggling in the rest of the 3.0 patches I guess was not ideal. 3.1 is supposed to be coming very soon from upstream and yum will get updated then. Most definitely it will either get a new upstream release, or the forward port before Test1. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From jwilliam at xmission.com Sun Jan 21 00:27:46 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Sat, 20 Jan 2007 17:27:46 -0700 Subject: USB/NFS install of rawhide Grub problem. Message-ID: <000c01c73cf2$f9da6460$020aa8c0@a18> I found a use for the little 16MB memory cards that come with your camera. I put one in a USB reader and it seems to work fine. I tried to use the bootdisk.img file, but I couldn't get my IBM T30 laptop to boot from that. I tried dd if=bootkdisk.img of=/dev/sdc fdisk -l /dev/sdc lists a bunch or partitions and whines about them. So I did: mount p450:/var/download/rawhide /media dd if=/dev/zero /dev/sdc /usr/lib/syslinux/mkdiskimage -4 /dev/sdc 0 64 32 sync sleep 5 syslinux /dev/sdc4 mount /dev/sdc4 /mnt/sdc cd /mnt/sdc cp -av /media/isolinux/* . mv isolinux.cfg syslinux.cfg rm -f isolinux.bin cd / sync umount /mnt/sdc umount /media Boot from usb device. The problem that I ran into was grub decided my hard drive should be (hd1,1) and it should have been (hd0,1). One think that I noticed that the background was all black since it couldn't find /boot/grub/splash.xpm.gz since it was looking for a drive that didn't exist. I am guessing that it sees the usb as hd0 so it thinks the hard drive will be hd1. I have seen things like this with RHEL 4 and having more than 1 drive. It seems to want to use the wrong drive or the count is off. If I decide to file a bug report, would it be against grub or another program? Also it looks like Bluetooth was loaded. I don't have Bluetooth. I thought one of the goals of 7 was to not load things you don't have. From wdhammond at earthlink.net Sun Jan 21 01:17:41 2007 From: wdhammond at earthlink.net (wayne) Date: Sat, 20 Jan 2007 19:17:41 -0600 Subject: Error: Missing Dependency: libSDL_gfx.so.13 is needed by package perl-SDL Message-ID: <45B2BF35.3000102@earthlink.net> For the last month, yum has been failing to update with an error message: "Error: Missing Dependency: libSDL_gfx.so.13 is needed by package perl-SDL" This last time I tried a recommendation for a similar problem posted on the Red Hat forums. It did not work. How can I resolve this problem? [root at localhost ~]# sudo yum --exclude=perl-SDL* update Loading "installonlyn" plugin Setting up Update Process Setting up repositories Reading repository metadata in from local files Excluding Packages in global exclude list Finished Resolving Dependencies < snip processing of files > --> Finished Dependency Resolution Error: Missing Dependency: libSDL_gfx.so.13 is needed by package perl-SDL -- Wayne www.glenmeadows.us "I cannot imagine a God who rewards and punishes the objects of his creation, whose purposes are modeled after our own -- a God, in short, who is but a reflection of human frailty. Neither can I believe that the individual survives the death of his body, although feeble souls harbor such thoughts through fear or ridiculous egotism." [Einstein] -------------- next part -------------- An HTML attachment was scrubbed... URL: From mschwendt.tmp0701.nospam at arcor.de Sun Jan 21 02:39:36 2007 From: mschwendt.tmp0701.nospam at arcor.de (Michael Schwendt) Date: Sun, 21 Jan 2007 03:39:36 +0100 Subject: Error: Missing Dependency: libSDL_gfx.so.13 is needed by package perl-SDL In-Reply-To: <45B2BF35.3000102@earthlink.net> References: <45B2BF35.3000102@earthlink.net> Message-ID: <20070121033936.8a1204c0.mschwendt.tmp0701.nospam@arcor.de> On Sat, 20 Jan 2007 19:17:41 -0600, wayne wrote: > For the last month, yum has been failing to update with an error > message: "Error: Missing Dependency: libSDL_gfx.so.13 is needed by > package perl-SDL" > > This last time I tried a recommendation for a similar problem posted on > the Red Hat forums. It did not work. How can I resolve this problem? > > [root at localhost ~]# sudo yum --exclude=perl-SDL* update > Loading "installonlyn" plugin > Setting up Update Process > Setting up repositories > Reading repository metadata in from local files > Excluding Packages in global exclude list > Finished > Resolving Dependencies > < snip processing of files > > --> Finished Dependency Resolution > Error: Missing Dependency: libSDL_gfx.so.13 is needed by package perl-SDL This can mean that one of your enabled repositories tries to upgrade SDL_gfx to a different SONAME, which breaks the dependency in perl-SDL. What repositories do you have enabled? What are the installed versions of perl-SDL and SDL_gfx? In Fedora Extras Development I see SDL_gfx-2.0.13-7.fc6 perl-SDL-2.1.3-3.fc6 which are compatible (and SDL_gfx provides libSDL_gfx.so.13 e.g.). The broken deps report for Fedora Extras doesn't list your problem either: https://www.redhat.com/archives/fedora-extras-list/2007-January/msg00480.html From ernesto at ornl.gov Sun Jan 21 03:11:01 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Sat, 20 Jan 2007 22:11:01 -0500 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <20070120142916.GC25079@neu.nirvana> References: <1169266349.3979.1.camel@panther> <20070120142916.GC25079@neu.nirvana> Message-ID: <1169349061.8176.8.camel@panther> On Sat, 2007-01-20 at 15:29 +0100, Axel Thimm wrote: > On Fri, Jan 19, 2007 at 11:12:29PM -0500, Ernest L. Williams Jr. wrote: > > After updating the kernel wireless no longer works: > > > > > > [root at panther ~]# modprobe ipw3945; ipw3945d > > FATAL: Module ipw3945 not found. > > 2007-01-19 23:10:49: ERROR: Could not find Intel PRO/Wireless 3945ABG > > Network Connection > > [1]+ Done system-config-network > > ipw3945d - regulatory daemon > > Copyright (C) 2005-2006 Intel Corporation. All rights reserved. > > version: 1.7.22 > > 2007-01-19 23:10:49: ERROR: Could not find Intel PRO/Wireless 3945ABG > > Network Connection > > [root at panther ~]# uname -a > > Linux panther 2.6.19-1.2895.fc6 #1 SMP Wed Jan 10 18:50:56 EST 2007 > > x86_64 x86_64 x86_64 GNU/Linux > > > > > > > > Any ideas? > > Install yum-plugin-kmdl, that will pick up kmdl on kernel upgrades, > even after the kernel has been installed. I did that. My kernel is: 2.6.19-1.2895.fc6 #1 SMP I still get errors: =============================================================== [root at panther ~]# yum -y install ipw3945 ipw3945d Loading "installonlyn" plugin Loading "kmdl" plugin Setting up Install Process Setting up repositories Reading repository metadata in from local files Parsing package install arguments Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Downloading header for ipw3945 to pack into transaction set. ipw3945-1.2.0-18.2.fc6.at 100% |=========================| 3.3 kB 00:00 ---> Package ipw3945.x86_64 0:1.2.0-18.2.fc6.at set to be updated ---> Downloading header for ipw3945d to pack into transaction set. ipw3945d-1.7.22-4.at.x86_ 100% |=========================| 2.9 kB 00:00 ---> Package ipw3945d.x86_64 0:1.7.22-4.at set to be updated --> Running transaction check --> Processing Dependency: ipw3945-kmdl-1.2.0-18.2.fc6.at for package: ipw3945 --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Downloading header for ipw3945-kmdl-2.6.18-1.2869.fc6 to pack into transaction set. ipw3945-kmdl-2.6.18-1.286 100% |=========================| 4.0 kB 00:00 ---> Package ipw3945-kmdl-2.6.18-1.2869.fc6.x86_64 0:1.2.0-18.2.fc6.at set to be updated --> Running transaction check Dependencies Resolved ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: ipw3945 x86_64 1.2.0-18.2.fc6.at atrpms 35 k ipw3945d x86_64 1.7.22-4.at atrpms 36 k Installing for dependencies: ipw3945-kmdl-2.6.18-1.2869.fc6 x86_64 1.2.0-18.2.fc6.at atrpms 94 k Transaction Summary ============================================================================= Install 3 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 165 k Downloading Packages: (1/3): ipw3945-1.2.0-18.2 100% |=========================| 35 kB 00:00 (2/3): ipw3945-kmdl-2.6.1 100% |=========================| 94 kB 00:00 (3/3): ipw3945d-1.7.22-4. 100% |=========================| 36 kB 00:00 Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing: ipw3945d ######################### [1/3] Installing: ipw3945-kmdl-2.6.18-1.2869.f ######################### [2/3] Installing: ipw3945 ######################### [3/3] Installed: ipw3945.x86_64 0:1.2.0-18.2.fc6.at ipw3945d.x86_64 0:1.7.22-4.at Dependency Installed: ipw3945-kmdl-2.6.18-1.2869.fc6.x86_64 0:1.2.0-18.2.fc6.at Complete! [root at panther ~]# modprobe ipw3945; ipw3945d FATAL: Module ipw3945 not found. 2007-01-20 22:08:46: ERROR: Could not find Intel PRO/Wireless 3945ABG Network Connection ipw3945d - regulatory daemon Copyright (C) 2005-2006 Intel Corporation. All rights reserved. version: 1.7.22 2007-01-20 22:08:46: ERROR: Could not find Intel PRO/Wireless 3945ABG Network Connection ============================================================== From ernesto at ornl.gov Sun Jan 21 03:14:08 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Sat, 20 Jan 2007 22:14:08 -0500 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <45B1C8AE.1020106@bothner.com> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> <45B1C8AE.1020106@bothner.com> Message-ID: <1169349248.8176.12.camel@panther> On Fri, 2007-01-19 at 23:45 -0800, Per Bothner wrote: > dragoran wrote: > > you need to build and install the ipw3945 module. > > http://ipw3945.sf.net > > Ernest may have been using ipw3945 rpms from atrpms.net. > They're not always immediately updated, though there > seems to be new modules for kernel 2895 as of today. Yes, I was using atrpms.net REPO. yum install only picks up ipw3945-kmdl-2.6.18-1.2869.fc6.x86_64 I would expect 2895. [root at panther ~]# uname -a Linux panther 2.6.19-1.2895.fc6 #1 SMP Wed Jan 10 18:50:56 EST 2007 x86_64 x86_64 x86_64 GNU/Linux > > Though last time I updated, it didn't work for me, > even though I had updated to a matching kernel module. You also have to modify modprobe.conf manually: install ipw3945 /sbin/modprobe --ignore-install ipw3945 ; sleep 0.5 ; /sbin/ipw3945d --quiet remove ipw3945 /sbin/ipw3945d --kill ; /sbin/modprobe -r --ignore-remove ipw3945 > > Hopefully, FC7 will have "wireless that just works" > for ipw3945 ... > -- > --Per Bothner > per at bothner.com http://per.bothner.com/ > From vonbrand at inf.utfsm.cl Sun Jan 21 03:53:07 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Sun, 21 Jan 2007 00:53:07 -0300 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169266349.3979.1.camel@panther> References: <1169266349.3979.1.camel@panther> Message-ID: <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> Ernest L. Williams Jr. wrote: > After updating the kernel wireless no longer works: > > > [root at panther ~]# modprobe ipw3945; ipw3945d > FATAL: Module ipw3945 not found. Need to rebuild the (out-of-tree, not-in-Fedora-kernel) module. Sheesh... PS: Go to , there you'll find the source. Note that for me only 1.1.3 + 3 patches listed works with Fedora's kernels, the 1.2.0 one doesn't. -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From per at bothner.com Sun Jan 21 04:18:35 2007 From: per at bothner.com (Per Bothner) Date: Sat, 20 Jan 2007 20:18:35 -0800 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169349248.8176.12.camel@panther> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> <45B1C8AE.1020106@bothner.com> <1169349248.8176.12.camel@panther> Message-ID: <45B2E99B.1070302@bothner.com> Ernest L. Williams Jr. wrote: > On Fri, 2007-01-19 at 23:45 -0800, Per Bothner wrote: >> Though last time I updated, it didn't work for me, >> even though I had updated to a matching kernel module. > You also have to modify modprobe.conf manually: > > install ipw3945 /sbin/modprobe --ignore-install ipw3945 ; sleep > 0.5 ; /sbin/ipw3945d --quiet > remove ipw3945 /sbin/ipw3945d --kill ; /sbin/modprobe -r --ignore-remove > ipw3945 Actually, I got it working today. The hint to also install yum-plugin-kmdl may have helped. I don't need anything for ipw3945 in modprobe.conf. Instead I created the attached init file. (I can't start ipw3945d from rc.local, since that gets run too late.) -- --Per Bothner per at bothner.com http://per.bothner.com/ -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: ipw3945d URL: From monty19 at hotmail.com Sun Jan 21 05:44:43 2007 From: monty19 at hotmail.com (monty19@ hotmail.com) Date: Sun, 21 Jan 2007 05:44:43 +0000 Subject: Inclusion of Grub 2 in FC7 ? Message-ID: I would like to see it included, at least as an option. I gather that it is too late for FC7, but it would be nice to be able to boot to a root partition on a Software RAID when F8 comes out... From Axel.Thimm at ATrpms.net Sun Jan 21 08:21:07 2007 From: Axel.Thimm at ATrpms.net (Axel Thimm) Date: Sun, 21 Jan 2007 09:21:07 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169349061.8176.8.camel@panther> References: <1169266349.3979.1.camel@panther> <20070120142916.GC25079@neu.nirvana> <1169349061.8176.8.camel@panther> Message-ID: <20070121082107.GR25079@neu.nirvana> On Sat, Jan 20, 2007 at 10:11:01PM -0500, Ernest L. Williams Jr. wrote: > On Sat, 2007-01-20 at 15:29 +0100, Axel Thimm wrote: > > On Fri, Jan 19, 2007 at 11:12:29PM -0500, Ernest L. Williams Jr. wrote: > > > After updating the kernel wireless no longer works: > > Install yum-plugin-kmdl, that will pick up kmdl on kernel upgrades, > > even after the kernel has been installed. > > I did that. > > My kernel is: 2.6.19-1.2895.fc6 #1 SMP > > I still get errors: > =============================================================== > [root at panther ~]# yum -y install ipw3945 ipw3945d > Loading "installonlyn" plugin > Loading "kmdl" plugin > Installing for dependencies: > ipw3945-kmdl-2.6.18-1.2869.fc6 x86_64 1.2.0-18.2.fc6.at atrpms > 94 k Try yum install ipw3945-kmdl-2.6.19-1.2895.fc6 -- Axel.Thimm at ATrpms.net -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From drago01 at gmail.com Sun Jan 21 10:04:36 2007 From: drago01 at gmail.com (dragoran) Date: Sun, 21 Jan 2007 11:04:36 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> Message-ID: <45B33AB4.9010405@gmail.com> Horst H. von Brand wrote: > Ernest L. Williams Jr. wrote: > >> After updating the kernel wireless no longer works: >> >> >> [root at panther ~]# modprobe ipw3945; ipw3945d >> FATAL: Module ipw3945 not found. >> > > Need to rebuild the (out-of-tree, not-in-Fedora-kernel) module. > > Sheesh... > > PS: Go to , there you'll find the source. Note that > for me only 1.1.3 + 3 patches listed works with Fedora's kernels, the > 1.2.0 one doesn't. > I am using 1.2.0 without any problems. What do you mean by doesn't work? From buildsys at redhat.com Sun Jan 21 11:32:11 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sun, 21 Jan 2007 06:32:11 -0500 Subject: rawhide report: 20070121 changes Message-ID: <200701211132.l0LBWBgD007512@hs20-bc2-6.build.redhat.com> Updated Packages: cairo-1.3.12-1.fc7 ------------------ * Sat Jan 20 2007 Carl Worth 1.3.12-1 - Update to 1.3.12 esound-1:0.2.36-4.fc7 --------------------- * Sat Jan 20 2007 Matthias Clasen - 1:0.2.36-4 - Split a -libs package off the core esound package in preparation for pulseaudio (#223503) - Correct the License tag gaim-2:2.0.0-0.30.beta6.fc7 --------------------------- * Sat Jan 20 2007 Warren Togami - 2:2.0.0-0.30.beta6 - 2.0.0 beta6 gdb-6.6-1.fc7 ------------- * Sat Jan 20 2007 Jan Kratochvil - 6.6-1 - Upgrade to GDB 6.6. Drop redundant patches, forward-port remaining ones. - Backported post gdb-6.6 release ia64 unwinding fixups. - Testcase for exec() from threaded program (BZ 202689). * Mon Jan 15 2007 Jan Kratochvil - 6.5-27 - Fix the testsuite results broken in 6.5-26, stop invalid testsuite runs. * Sat Jan 13 2007 Jan Kratochvil - 6.5-26 - Fix unwinding of non-debug (.eh_frame) PPC code, Andreas Schwab (BZ 140532). - Fix unwinding of debug (.debug_frame) PPC code, workaround GCC (BZ 140532). - Fix missing testsuite .log output of testcases using get_compiler_info(). gnome-python2-extras-2.14.2-8.fc7 --------------------------------- * Sat Jan 20 2007 Matthew Barnes - 2.14.2-8.fc7 - Add missing BuildRequires gnome-python2-devel (RH bug #223602). gnome-speech-0.4.8-1.fc7 ------------------------ * Sat Jan 20 2007 Matthias Clasen - 0.4.8-1 - Update to 0.4.8 gnome-themes-2.17.5-3.fc7 ------------------------- * Sat Jan 20 2007 Matthias Clasen - 2.17.5-3 - Re-add the Clearlooks icon theme libgnomeui-2.17.1-2.fc7 ----------------------- * Sat Jan 20 2007 Matthias Clasen - 2.17.1-2 - Drop explicit esound requirement in preparation for pulseaudio - Clean up requires Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From mefoster at gmail.com Sun Jan 21 12:57:36 2007 From: mefoster at gmail.com (Mary Ellen Foster) Date: Sun, 21 Jan 2007 12:57:36 +0000 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <45B33AB4.9010405@gmail.com> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> Message-ID: On 21/01/07, dragoran wrote: > I am using 1.2.0 without any problems. > What do you mean by doesn't work? For me, anyway, NetworkManager never gets past "stage 2" (28% connected), even if I'm connecting to an open access point with a strong signal. Trying to connect without NetworkManager has similar results, in that it sees things but doesn't associate. Are there people who are successfully using these drivers? I've tried a few times and so far with no joy. MEF -- Mary Ellen Foster http://homepages.inf.ed.ac.uk/mef/ From ernesto at ornl.gov Sun Jan 21 13:57:22 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Sun, 21 Jan 2007 08:57:22 -0500 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <20070121082107.GR25079@neu.nirvana> References: <1169266349.3979.1.camel@panther> <20070120142916.GC25079@neu.nirvana> <1169349061.8176.8.camel@panther> <20070121082107.GR25079@neu.nirvana> Message-ID: <1169387842.3371.0.camel@panther> On Sun, 2007-01-21 at 09:21 +0100, Axel Thimm wrote: > On Sat, Jan 20, 2007 at 10:11:01PM -0500, Ernest L. Williams Jr. wrote: > > On Sat, 2007-01-20 at 15:29 +0100, Axel Thimm wrote: > > > On Fri, Jan 19, 2007 at 11:12:29PM -0500, Ernest L. Williams Jr. wrote: > > > > After updating the kernel wireless no longer works: > > > > Install yum-plugin-kmdl, that will pick up kmdl on kernel upgrades, > > > even after the kernel has been installed. > > > > I did that. > > > > My kernel is: 2.6.19-1.2895.fc6 #1 SMP > > > > I still get errors: > > =============================================================== > > [root at panther ~]# yum -y install ipw3945 ipw3945d > > Loading "installonlyn" plugin > > Loading "kmdl" plugin > > > Installing for dependencies: > > ipw3945-kmdl-2.6.18-1.2869.fc6 x86_64 1.2.0-18.2.fc6.at atrpms > > 94 k > > Try yum install ipw3945-kmdl-2.6.19-1.2895.fc6 That worked perfect!! [root at panther ~]# yum install ipw3945-kmdl-2.6.19-1.2895.fc6 Loading "installonlyn" plugin Loading "kmdl" plugin Setting up Install Process Setting up repositories atrpms 100% |=========================| 951 B 00:00 core 100% |=========================| 1.1 kB 00:00 updates 100% |=========================| 1.2 kB 00:00 extras 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files primary.xml.gz 100% |=========================| 238 kB 00:00 atrpms : ################################################## 920/920 Parsing package install arguments Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Downloading header for ipw3945-kmdl-2.6.19-1.2895.fc6 to pack into transaction set. ipw3945-kmdl-2.6.19-1.289 100% |=========================| 4.0 kB 00:00 ---> Package ipw3945-kmdl-2.6.19-1.2895.fc6.x86_64 0:1.2.0-18.2.fc6.at set to be updated --> Running transaction check --> Processing Dependency: ieee80211-kmdl-2.6.19-1.2895.fc6 >= 1.1.11 for package: ipw3945-kmdl-2.6.19-1.2895.fc6 --> Processing Dependency: ipw3945d >= 1.7.18 for package: ipw3945-kmdl-2.6.19-1.2895.fc6 --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Downloading header for ieee80211-kmdl-2.6.19-1.2895.fc6 to pack into transaction set. ieee80211-kmdl-2.6.19-1.2 100% |=========================| 4.9 kB 00:00 ---> Package ieee80211-kmdl-2.6.19-1.2895.fc6.x86_64 0:1.2.16-16.fc6.at set to be updated ---> Downloading header for ipw3945d to pack into transaction set. ipw3945d-1.7.22-4.at.x86_ 100% |=========================| 2.9 kB 00:00 ---> Package ipw3945d.x86_64 0:1.7.22-4.at set to be updated --> Running transaction check Dependencies Resolved ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: ipw3945-kmdl-2.6.19-1.2895.fc6 x86_64 1.2.0-18.2.fc6.at atrpms 94 k Installing for dependencies: ieee80211-kmdl-2.6.19-1.2895.fc6 x86_64 1.2.16-16.fc6.at atrpms 44 k ipw3945d x86_64 1.7.22-4.at atrpms 36 k Transaction Summary ============================================================================= Install 3 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 174 k Is this ok [y/N]: y Downloading Packages: (1/3): ipw3945-kmdl-2.6.1 100% |=========================| 94 kB 00:00 (2/3): ieee80211-kmdl-2.6 100% |=========================| 44 kB 00:00 (3/3): ipw3945d-1.7.22-4. 100% |=========================| 36 kB 00:00 Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing: ipw3945d ######################### [1/3] Installing: ieee80211-kmdl-2.6.19-1.2895 ######################### [2/3] Installing: ipw3945-kmdl-2.6.19-1.2895.f ######################### [3/3] Installed: ipw3945-kmdl-2.6.19-1.2895.fc6.x86_64 0:1.2.0-18.2.fc6.at Dependency Installed: ieee80211-kmdl-2.6.19-1.2895.fc6.x86_64 0:1.2.16-16.fc6.at ipw3945d.x86_64 0:1.7.22-4.at Complete! [root at panther ~]# modprobe ipw3945; ipw3945d ipw3945d - regulatory daemon Copyright (C) 2005-2006 Intel Corporation. All rights reserved. version: 1.7.22 2007-01-21 08:55:52: ERROR: ipw3945d already running. If ipw3945d is not running then you need to remove '/var/run/ipw3945d.pid' and try again. From drago01 at gmail.com Sun Jan 21 13:13:45 2007 From: drago01 at gmail.com (dragoran) Date: Sun, 21 Jan 2007 14:13:45 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> Message-ID: <45B36709.6080409@gmail.com> Mary Ellen Foster wrote: > On 21/01/07, dragoran wrote: >> I am using 1.2.0 without any problems. >> What do you mean by doesn't work? > > For me, anyway, NetworkManager never gets past "stage 2" (28% > connected), even if I'm connecting to an open access point with a > strong signal. Trying to connect without NetworkManager has similar > results, in that it sees things but doesn't associate. > > Are there people who are successfully using these drivers? I've tried > a few times and so far with no joy. > yes.. I am using it and have not noticed any problems (yet) I only can't create encrypted ad-hoc networks but this never worked for me... > MEF > From josep.puigdemont at gmail.com Sun Jan 21 14:27:13 2007 From: josep.puigdemont at gmail.com (Josep Puigdemont) Date: Sun, 21 Jan 2007 15:27:13 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> Message-ID: <1169389633.3460.72.camel@baldrick.mine.nu> Hi, El dg 21 de 01 del 2007 a les 12:57 +0000, en/na Mary Ellen Foster va escriure: > On 21/01/07, dragoran wrote: > > I am using 1.2.0 without any problems. > > What do you mean by doesn't work? > > For me, anyway, NetworkManager never gets past "stage 2" (28% > connected), even if I'm connecting to an open access point with a > strong signal. Trying to connect without NetworkManager has similar > results, in that it sees things but doesn't associate. > > Are there people who are successfully using these drivers? I've tried > a few times and so far with no joy. I'm not sure if it was the same, but I also had problems connecting to open access points with strong signal. Then I thought it could be due to IPv6, because I could see some messages in the log about not being able to get an IP or something. Although I I thought I had it disabled, I manually changed the IPv6 setting in /etc/sysconfig/network, and that did the trick for me. My problems could be due to something else, I'm not sure, but since then I have no trouble connecting to open networks. /Josep > > MEF > > -- > Mary Ellen Foster > http://homepages.inf.ed.ac.uk/mef/ > From ernesto at ornl.gov Sun Jan 21 14:32:48 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Sun, 21 Jan 2007 09:32:48 -0500 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <45B2E99B.1070302@bothner.com> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> <45B1C8AE.1020106@bothner.com> <1169349248.8176.12.camel@panther> <45B2E99B.1070302@bothner.com> Message-ID: <1169389968.4130.8.camel@panther> On Sat, 2007-01-20 at 20:18 -0800, Per Bothner wrote: > Ernest L. Williams Jr. wrote: > > On Fri, 2007-01-19 at 23:45 -0800, Per Bothner wrote: > >> Though last time I updated, it didn't work for me, > >> even though I had updated to a matching kernel module. > > You also have to modify modprobe.conf manually: > > > > install ipw3945 /sbin/modprobe --ignore-install ipw3945 ; sleep > > 0.5 ; /sbin/ipw3945d --quiet > > remove ipw3945 /sbin/ipw3945d --kill ; /sbin/modprobe -r --ignore-remove > > ipw3945 > > Actually, I got it working today. The hint to also > install yum-plugin-kmdl may have helped. Yes, I did this also. > > I don't need anything for ipw3945 in modprobe.conf. > Instead I created the attached init file. > > (I can't start ipw3945d from rc.local, since that gets > run too late.) Agreed; ipw3945 never comes back after a reboot. I must manually restart it each time. Sometimes it will just associate and come to life on its own a few "10s of seconds" after I log into my desktop. We should not have to put this into rc.local. By the way, I tried your script and it did not work for me. I thought that the purpose of modprobe.conf is to get the device going early on. Also, I have used system-config-network to setup eth1 to startup at boot time. My "/etc/sysconfig/network-scripts/ifcfg-eth1" reflects this as well. When booting the message states something like: ============================================================== Device ipw3945 not detected; delaying initialization. ============================================================== Thanks, Ernest > plain text document attachment (ipw3945d) > # chkconfig: 2345 4 96 > # description: Start ipw3945 daemon > > # Source function library. > . /etc/init.d/functions > > test -x /sbin/ipw3945d || exit 0 > > start() > { > echo -n $"Starting ipw3945d: " > /sbin/ipw3945d > echo > } > > case "$1" in > start) > start > ;; > stop) > ;; > status) > status /sbin/ipw3945d > ;; > *) > echo $"Usage: $0 {start|stop|restart|condrestart|status}" > exit 1 > esac > > exit $RETVAL > From ernesto at ornl.gov Sun Jan 21 14:35:49 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Sun, 21 Jan 2007 09:35:49 -0500 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <45B36709.6080409@gmail.com> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> <45B36709.6080409@gmail.com> Message-ID: <1169390149.4130.11.camel@panther> On Sun, 2007-01-21 at 14:13 +0100, dragoran wrote: > Mary Ellen Foster wrote: > > On 21/01/07, dragoran wrote: > >> I am using 1.2.0 without any problems. > >> What do you mean by doesn't work? > > > > For me, anyway, NetworkManager never gets past "stage 2" (28% > > connected), even if I'm connecting to an open access point with a > > strong signal. Trying to connect without NetworkManager has similar > > results, in that it sees things but doesn't associate. > > > > Are there people who are successfully using these drivers? I've tried > > a few times and so far with no joy. > > > yes.. I am using it and have not noticed any problems (yet) > I only can't create encrypted ad-hoc networks but this never worked for > me.. I have never used network manager. The NetworkManager and NetworkManagerDispatcher services are turned off by default. Should I turn these services on? What benefit do we get? Thanks, Ernest > > MEF > > > From drago01 at gmail.com Sun Jan 21 14:45:55 2007 From: drago01 at gmail.com (dragoran) Date: Sun, 21 Jan 2007 15:45:55 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169390149.4130.11.camel@panther> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> <45B36709.6080409@gmail.com> <1169390149.4130.11.camel@panther> Message-ID: <45B37CA3.8060001@gmail.com> Ernest L. Williams Jr. wrote: > On Sun, 2007-01-21 at 14:13 +0100, dragoran wrote: > >> Mary Ellen Foster wrote: >> >>> On 21/01/07, dragoran wrote: >>> >>>> I am using 1.2.0 without any problems. >>>> What do you mean by doesn't work? >>>> >>> For me, anyway, NetworkManager never gets past "stage 2" (28% >>> connected), even if I'm connecting to an open access point with a >>> strong signal. Trying to connect without NetworkManager has similar >>> results, in that it sees things but doesn't associate. >>> >>> Are there people who are successfully using these drivers? I've tried >>> a few times and so far with no joy. >>> >>> >> yes.. I am using it and have not noticed any problems (yet) >> I only can't create encrypted ad-hoc networks but this never worked for >> me.. >> > > I have never used network manager. The NetworkManager and > NetworkManagerDispatcher services are turned off by default. > > Should I turn these services on? What benefit do we get? > > you will get a gnome applet that let you manage your wlan (and lan) connections easy. it also auto switch beetween cable/wlan when you plug in a cable etc.. > Thanks, > Ernest > > > > >>> MEF >>> >>> > > From vonbrand at inf.utfsm.cl Sun Jan 21 15:20:50 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Sun, 21 Jan 2007 12:20:50 -0300 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <45B33AB4.9010405@gmail.com> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> Message-ID: <200701211520.l0LFKovp006151@laptop13.inf.utfsm.cl> dragoran wrote: > Horst H. von Brand wrote: > > Ernest L. Williams Jr. wrote: > > > >> After updating the kernel wireless no longer works: > >> > >> > >> [root at panther ~]# modprobe ipw3945; ipw3945d > >> FATAL: Module ipw3945 not found. > >> > > > > Need to rebuild the (out-of-tree, not-in-Fedora-kernel) module. > > > > Sheesh... > > > > PS: Go to , there you'll find the source. Note that > > for me only 1.1.3 + 3 patches listed works with Fedora's kernels, the > > 1.2.0 one doesn't. > > > I am using 1.2.0 without any problems. > What do you mean by doesn't work? Doesn't build with Fedora kernels. -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From drago01 at gmail.com Sun Jan 21 15:37:21 2007 From: drago01 at gmail.com (dragoran) Date: Sun, 21 Jan 2007 16:37:21 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <200701211520.l0LFKovp006151@laptop13.inf.utfsm.cl> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> <200701211520.l0LFKovp006151@laptop13.inf.utfsm.cl> Message-ID: <45B388B1.30705@gmail.com> Horst H. von Brand wrote: > dragoran wrote: > >> Horst H. von Brand wrote: >> >>> Ernest L. Williams Jr. wrote: >>> >>> >>>> After updating the kernel wireless no longer works: >>>> >>>> >>>> [root at panther ~]# modprobe ipw3945; ipw3945d >>>> FATAL: Module ipw3945 not found. >>>> >>>> >>> Need to rebuild the (out-of-tree, not-in-Fedora-kernel) module. >>> >>> Sheesh... >>> >>> PS: Go to , there you'll find the source. Note that >>> for me only 1.1.3 + 3 patches listed works with Fedora's kernels, the >>> 1.2.0 one doesn't. >>> >>> >> I am using 1.2.0 without any problems. >> What do you mean by doesn't work? >> > > Doesn't build with Fedora kernels. > it does ... are you using rawhide? if yes it fails because it fails to detect it as 2.6.20 .... From kdekorte at gmail.com Sun Jan 21 11:41:17 2007 From: kdekorte at gmail.com (Kevin DeKorte) Date: Sun, 21 Jan 2007 06:41:17 -0500 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> Message-ID: <45B3515D.4010603@gmail.com> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Mary Ellen Foster wrote: > On 21/01/07, dragoran wrote: >> I am using 1.2.0 without any problems. >> What do you mean by doesn't work? > > For me, anyway, NetworkManager never gets past "stage 2" (28% > connected), even if I'm connecting to an open access point with a > strong signal. Trying to connect without NetworkManager has similar > results, in that it sees things but doesn't associate. > > Are there people who are successfully using these drivers? I've tried > a few times and so far with no joy. > > MEF > I use the version 1.2 drivers on my laptop running FC6 with NetworkManager and they work really well. I only use the ipw3945 drivers that I compile myself and I don't use the ieee drivers that are related since the kernel in Fedora is new enough. The only problem I have with the drivers is that once you are connected to a AP, it doesn't seem to do anymore scanning so you can't see a complete list of APs in your area. Kevin - -- Get my public GnuPG key from http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7D0BD5D1 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iD8DBQFFs1Fd6w2kMH0L1dERAphbAJwOtBayS2dqNIAQWCqhJNA6GE8eDgCglRj9 CYtu3yY+RQPY38tZJzYs5G8= =AaOy -----END PGP SIGNATURE----- From wdhammond at earthlink.net Sun Jan 21 17:10:02 2007 From: wdhammond at earthlink.net (wayne) Date: Sun, 21 Jan 2007 11:10:02 -0600 Subject: fedora-test-list Digest, Vol 35, Issue 27 In-Reply-To: <20070121141303.2770973421@hormel.redhat.com> References: <20070121141303.2770973421@hormel.redhat.com> Message-ID: <45B39E6A.3030208@earthlink.net> fedora-test-list-request at redhat.com wrote: > Send fedora-test-list mailing list submissions to > fedora-test-list at redhat.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://www.redhat.com/mailman/listinfo/fedora-test-list > or, via email, send a message with subject or body 'help' to > fedora-test-list-request at redhat.com > > You can reach the person managing the list at > fedora-test-list-owner at redhat.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of fedora-test-list digest..." > > > Today's Topics: > > 1. USB/NFS install of rawhide Grub problem. (Jerry Williams) > 2. Error: Missing Dependency: libSDL_gfx.so.13 is needed by > package perl-SDL (wayne) > 3. Re: Error: Missing Dependency: libSDL_gfx.so.13 is needed by > package perl-SDL (Michael Schwendt) > 4. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG > (Ernest L. Williams Jr.) > 5. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG > (Ernest L. Williams Jr.) > 6. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG > (Horst H. von Brand) > 7. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG (Per Bothner) > 8. Re: Inclusion of Grub 2 in FC7 ? (monty19@ hotmail.com) > 9. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG (Axel Thimm) > 10. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG (dragoran) > 11. rawhide report: 20070121 changes (buildsys at redhat.com) > 12. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG > (Mary Ellen Foster) > 13. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG > (Ernest L. Williams Jr.) > 14. Re: ERROR: Could not find Intel PRO/Wireless 3945ABG (dragoran) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 20 Jan 2007 17:27:46 -0700 > From: "Jerry Williams" > Subject: USB/NFS install of rawhide Grub problem. > To: > Message-ID: <000c01c73cf2$f9da6460$020aa8c0 at a18> > Content-Type: text/plain; charset="us-ascii" > > I found a use for the little 16MB memory cards that come with your camera. > I put one in a USB reader and it seems to work fine. > I tried to use the bootdisk.img file, but I couldn't get my IBM T30 laptop > to boot from that. > I tried dd if=bootkdisk.img of=/dev/sdc > fdisk -l /dev/sdc > lists a bunch or partitions and whines about them. > So I did: > mount p450:/var/download/rawhide /media > dd if=/dev/zero /dev/sdc > /usr/lib/syslinux/mkdiskimage -4 /dev/sdc 0 64 32 > sync > sleep 5 > syslinux /dev/sdc4 > mount /dev/sdc4 /mnt/sdc > cd /mnt/sdc > cp -av /media/isolinux/* . > mv isolinux.cfg syslinux.cfg > rm -f isolinux.bin > cd / > sync > umount /mnt/sdc > umount /media > > Boot from usb device. > > The problem that I ran into was grub decided my hard drive should be (hd1,1) > and it should have been (hd0,1). > One think that I noticed that the background was all black since it couldn't > find /boot/grub/splash.xpm.gz since it was looking for a drive that didn't > exist. > I am guessing that it sees the usb as hd0 so it thinks the hard drive will > be hd1. > I have seen things like this with RHEL 4 and having more than 1 drive. It > seems to want to use the wrong drive or the count is off. > > If I decide to file a bug report, would it be against grub or another > program? > > Also it looks like Bluetooth was loaded. I don't have Bluetooth. > I thought one of the goals of 7 was to not load things you don't have. > > > > > ------------------------------ > > Message: 2 > Date: Sat, 20 Jan 2007 19:17:41 -0600 > From: wayne > Subject: Error: Missing Dependency: libSDL_gfx.so.13 is needed by > package perl-SDL > To: fedora-test-list at redhat.com > Message-ID: <45B2BF35.3000102 at earthlink.net> > Content-Type: text/plain; charset="utf-8" > > For the last month, yum has been failing to update with an error > message: "Error: Missing Dependency: libSDL_gfx.so.13 is needed by > package perl-SDL" > > This last time I tried a recommendation for a similar problem posted on > the Red Hat forums. It did not work. How can I resolve this problem? > > [root at localhost ~]# sudo yum --exclude=perl-SDL* update > Loading "installonlyn" plugin > Setting up Update Process > Setting up repositories > Reading repository metadata in from local files > Excluding Packages in global exclude list > Finished > Resolving Dependencies > < snip processing of files > > --> Finished Dependency Resolution > Error: Missing Dependency: libSDL_gfx.so.13 is needed by package perl-SDL > > I did a search on the error message and found http://www.ferzkopp.net/joomla/content/view/19/14/ which explains the reason for the error as: Author's Comment: The library versioning was changed in version 2.0.14. The original versioning used .so.13.0.0 which was wrong. The new versioning is using .so.0.0.14 which is right. The RPM dependency is set from the previous versioning scheme. A quick fix would be to locate the .so file using "locate SDL_gfx | grep .so" and making a symbolic link to the missing dependency as in "ln -s /usr/lib/SDL_gfx.so.0.0.15 /usr/lib/SDL_gfx.so.13". A newer .15 RPM might requires some scripts to do this automatically - I don't know how to set this up (that's why there is no .15 RPM right now.) Posted by Maurizio Loreti, whose homepage is here on 01/01/2007 at 14:19 I resolved the problem temporarily by removing frozen-bubble and perl-SDL which are the only applications on my computer requiring libSDL_gfx. I then had to go to /var/lib/rpm and delete all of the db files and rebuild the database with rpm -vv --rebuilddb This fixed the problem with updates. I am hesitant to reinstall frozen-bubble until this problem is resolved. -- Wayne www.glenmeadows.us "I cannot imagine a God who rewards and punishes the objects of his creation, whose purposes are modeled after our own -- a God, in short, who is but a reflection of human frailty. Neither can I believe that the individual survives the death of his body, although feeble souls harbor such thoughts through fear or ridiculous egotism." [Einstein] -------------- next part -------------- An HTML attachment was scrubbed... URL: From per at bothner.com Sun Jan 21 17:27:08 2007 From: per at bothner.com (Per Bothner) Date: Sun, 21 Jan 2007 09:27:08 -0800 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169389968.4130.8.camel@panther> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> <45B1C8AE.1020106@bothner.com> <1169349248.8176.12.camel@panther> <45B2E99B.1070302@bothner.com> <1169389968.4130.8.camel@panther> Message-ID: <45B3A26C.6050507@bothner.com> Ernest L. Williams Jr. wrote: > I thought that the purpose of modprobe.conf is to get the device going > early on. I don't believe the modules in modprobe.conf are automatically loaded. Rather from the man page, it is "a method of specifying what options are to be used with those modules." > Also, I have used system-config-network to setup eth1 to startup at boot > time. > My "/etc/sysconfig/network-scripts/ifcfg-eth1" reflects this as well. If you use NetworkManeger, turn off starting the wired network at boot time. On my laptopn there is no fle named /etc/sysconfig/network-scripts/fcfg-eth1 Ernest L. Williams Jr. wrote: > I have never used network manager. The NetworkManager and > NetworkManagerDispatcher services are turned off by default. > > Should I turn these services on? What benefit do we get? In addition to automatic switching between wired and wireless (as dragoran mentioned), you also get faster booting, especially when the Ethernet isn't plugged in, assuming you turn off starting the Ethernet at boot time: one less thing to time out ... -- --Per Bothner per at bothner.com http://per.bothner.com/ From Axel.Thimm at ATrpms.net Sun Jan 21 17:35:17 2007 From: Axel.Thimm at ATrpms.net (Axel Thimm) Date: Sun, 21 Jan 2007 18:35:17 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <45B388B1.30705@gmail.com> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> <200701211520.l0LFKovp006151@laptop13.inf.utfsm.cl> <45B388B1.30705@gmail.com> Message-ID: <20070121173517.GU25079@neu.nirvana> On Sun, Jan 21, 2007 at 04:37:21PM +0100, dragoran wrote: > Horst H. von Brand wrote: > >dragoran wrote: > > > >>Horst H. von Brand wrote: > >> > >>>Ernest L. Williams Jr. wrote: > >>> > >>> > >>>>After updating the kernel wireless no longer works: > >>>> > >>>> > >>>>[root at panther ~]# modprobe ipw3945; ipw3945d > >>>>FATAL: Module ipw3945 not found. > >>>> > >>>> > >>>Need to rebuild the (out-of-tree, not-in-Fedora-kernel) module. > >>> > >>>Sheesh... > >>> > >>>PS: Go to , there you'll find the source. Note > >>>that > >>> for me only 1.1.3 + 3 patches listed works with Fedora's kernels, the > >>> 1.2.0 one doesn't. > >>> > >>> > >>I am using 1.2.0 without any problems. > >>What do you mean by doesn't work? > >> > > > >Doesn't build with Fedora kernels. They builds with a little help (which almost every kernel module project requires). > it does ... are you using rawhide? > if yes it fails because it fails to detect it as 2.6.20 .... Try out the packages at http://atrpms.net/name/ipw3945/ they work for both FC6 and F7. -- Axel.Thimm at ATrpms.net -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From mschwendt.tmp0701.nospam at arcor.de Sun Jan 21 18:09:51 2007 From: mschwendt.tmp0701.nospam at arcor.de (Michael Schwendt) Date: Sun, 21 Jan 2007 19:09:51 +0100 Subject: fedora-test-list Digest, Vol 35, Issue 27 In-Reply-To: <45B39E6A.3030208@earthlink.net> References: <20070121141303.2770973421@hormel.redhat.com> <45B39E6A.3030208@earthlink.net> Message-ID: <20070121190951.876a6fb7.mschwendt.tmp0701.nospam@arcor.de> On Sun, 21 Jan 2007 11:10:02 -0600, wayne wrote: > > Error: Missing Dependency: libSDL_gfx.so.13 is needed by package perl-SDL > > > > > > I did a search on the error message and found http://www.ferzkopp.net/joomla/content/view/19/14/ > which explains the reason for the error as: No, all this does not apply to Fedora until the SDL_gfx packager does an upgrade to a newer SDL_gfx upstream release. > fix would be to locate the .so file using "locate SDL_gfx | grep .so" > and making a symbolic link to the missing dependency as in "ln -s > /usr/lib/SDL_gfx.so.0.0.15 /usr/lib/SDL_gfx.so.13". A newer .15 RPM > might requires some scripts to do this automatically - I don't know how > to set this up (that's why there is no .15 RPM right now.) This is not a fix but a poor hack. The fact that you have a SDL_gfx.so.0.0.15 proves that you have downloaded an SDL_gfx package from a non-Fedora repository. It is an incompatible package upgrade which breakes the dependencies. > Posted by Maurizio Loreti, whose homepage is here > on 01/01/2007 at 14:19 > > I resolved the problem temporarily by removing frozen-bubble and > perl-SDL which are the only applications on my computer requiring > libSDL_gfx. I then had to go to /var/lib/rpm and delete all of the db > files and rebuild the database with rpm -vv --rebuilddb > This fixed the problem with updates. > > I am hesitant to reinstall frozen-bubble until this problem is resolved. Just revisit my reply to your original message. You sound confused. Messing with files in /var/lib/rpm was not necessary. From michal at harddata.com Sun Jan 21 18:13:36 2007 From: michal at harddata.com (Michal Jaegermann) Date: Sun, 21 Jan 2007 11:13:36 -0700 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <45B3A26C.6050507@bothner.com> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> <45B1C8AE.1020106@bothner.com> <1169349248.8176.12.camel@panther> <45B2E99B.1070302@bothner.com> <1169389968.4130.8.camel@panther> <45B3A26C.6050507@bothner.com> Message-ID: <20070121181336.GC22504@mail.harddata.com> On Sun, Jan 21, 2007 at 09:27:08AM -0800, Per Bothner wrote: > > If you use NetworkManeger, turn off starting the wired network at > boot time. Well, if your interfaces are not configured with static addresses as only DHCP is handled. Also it looks like that NetworkManager does not notice interfaces which showed up after it was started. Say, you plugged in a Cardbus card with a wireless on it. It is not clear to me if NetworkManager is expected to react but it does not without a restart or two. Likely if you are adding ipw3945 in rc.local you should also restart NetworkManager there and then everything will work. Michal From per at bothner.com Sun Jan 21 18:23:23 2007 From: per at bothner.com (Per Bothner) Date: Sun, 21 Jan 2007 10:23:23 -0800 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <20070121181336.GC22504@mail.harddata.com> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> <45B1C8AE.1020106@bothner.com> <1169349248.8176.12.camel@panther> <45B2E99B.1070302@bothner.com> <1169389968.4130.8.camel@panther> <45B3A26C.6050507@bothner.com> <20070121181336.GC22504@mail.harddata.com> Message-ID: <45B3AF9B.7000801@bothner.com> Michal Jaegermann wrote: > Likely if you are adding ipw3945 > in rc.local you should also restart NetworkManager there and then > everything will work. That's why I suggested starting ipw3945d in an init script that is run before NetworkManager is started. rc.local is too late. -- --Per Bothner per at bothner.com http://per.bothner.com/ From pbrobinson at gmail.com Sun Jan 21 19:37:33 2007 From: pbrobinson at gmail.com (Peter Robinson) Date: Sun, 21 Jan 2007 19:37:33 +0000 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <20070121181336.GC22504@mail.harddata.com> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> <45B1C8AE.1020106@bothner.com> <1169349248.8176.12.camel@panther> <45B2E99B.1070302@bothner.com> <1169389968.4130.8.camel@panther> <45B3A26C.6050507@bothner.com> <20070121181336.GC22504@mail.harddata.com> Message-ID: <5256d0b0701211137g10e0414ck62086caa591d3f58@mail.gmail.com> I have the 3945 daemon starting in rc.local and networkmanager works with it just fine. I use the atrpm rpms with no issue but they don't seem to update it for the test kernels, but maybe they're in a test repo to match the fedora test repos. Peter On 1/21/07, Michal Jaegermann wrote: > On Sun, Jan 21, 2007 at 09:27:08AM -0800, Per Bothner wrote: > > > > If you use NetworkManeger, turn off starting the wired network at > > boot time. > > Well, if your interfaces are not configured with static addresses as > only DHCP is handled. Also it looks like that NetworkManager does > not notice interfaces which showed up after it was started. Say, > you plugged in a Cardbus card with a wireless on it. It is not > clear to me if NetworkManager is expected to react but it does not > without a restart or two. Likely if you are adding ipw3945 > in rc.local you should also restart NetworkManager there and then > everything will work. > > Michal > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list > From Axel.Thimm at ATrpms.net Sun Jan 21 19:55:44 2007 From: Axel.Thimm at ATrpms.net (Axel Thimm) Date: Sun, 21 Jan 2007 20:55:44 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <5256d0b0701211137g10e0414ck62086caa591d3f58@mail.gmail.com> References: <1169266349.3979.1.camel@panther> <45B1C6CA.10900@gmail.com> <45B1C8AE.1020106@bothner.com> <1169349248.8176.12.camel@panther> <45B2E99B.1070302@bothner.com> <1169389968.4130.8.camel@panther> <45B3A26C.6050507@bothner.com> <20070121181336.GC22504@mail.harddata.com> <5256d0b0701211137g10e0414ck62086caa591d3f58@mail.gmail.com> Message-ID: <20070121195544.GB25079@neu.nirvana> On Sun, Jan 21, 2007 at 07:37:33PM +0000, Peter Robinson wrote: > I have the 3945 daemon starting in rc.local and networkmanager works > with it just fine. I use the atrpm rpms with no issue but they don't > seem to update it for the test kernels, but maybe they're in a test > repo to match the fedora test repos. You mean the test kernels from updates-testing? I was once offering kmdls for these kernel, but two issues came up: Noone would use them, and when the kernel was to become golden (e.g. move for updates-testing to updates) it more often than not got a last minute change invalidating all kmdls for it, so either way I had to face rebuilds. It would be nice if there was a way to be notified of new kernels as soon as they get committed. There is fedora-packages-announce and the rawhide report, but the info there is when the kernel is already in the wild, and scanning fedora-packages-announce/rawhide reports just for new kernels is rather cumbersome. I usually notice new kernels rather fast enough because I'm also hosting an official mirror. > Peter > > On 1/21/07, Michal Jaegermann wrote: > >On Sun, Jan 21, 2007 at 09:27:08AM -0800, Per Bothner wrote: > >> > >> If you use NetworkManeger, turn off starting the wired network at > >> boot time. > > > >Well, if your interfaces are not configured with static addresses as > >only DHCP is handled. Also it looks like that NetworkManager does > >not notice interfaces which showed up after it was started. Say, > >you plugged in a Cardbus card with a wireless on it. It is not > >clear to me if NetworkManager is expected to react but it does not > >without a restart or two. Likely if you are adding ipw3945 > >in rc.local you should also restart NetworkManager there and then > >everything will work. > > > > Michal > > > -- Axel.Thimm at ATrpms.net -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From ernesto at ornl.gov Sun Jan 21 22:32:36 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Sun, 21 Jan 2007 17:32:36 -0500 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169389633.3460.72.camel@baldrick.mine.nu> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> <1169389633.3460.72.camel@baldrick.mine.nu> Message-ID: <1169418756.5008.2.camel@panther> On Sun, 2007-01-21 at 15:27 +0100, Josep Puigdemont wrote: > Hi, > > El dg 21 de 01 del 2007 a les 12:57 +0000, en/na Mary Ellen Foster va > escriure: > > On 21/01/07, dragoran wrote: > > > I am using 1.2.0 without any problems. > > > What do you mean by doesn't work? > > > > For me, anyway, NetworkManager never gets past "stage 2" (28% > > connected), even if I'm connecting to an open access point with a > > strong signal. Trying to connect without NetworkManager has similar > > results, in that it sees things but doesn't associate. > > > > Are there people who are successfully using these drivers? I've tried > > a few times and so far with no joy. > > I'm not sure if it was the same, but I also had problems connecting to > open access points with strong signal. > Then I thought it could be due to IPv6, because I could see some > messages in the log about not being able to get an IP or something. > Although I I thought I had it disabled, I manually changed the IPv6 > setting in /etc/sysconfig/network, and that did the trick for me. > My problems could be due to something else, I'm not sure, but since then > I have no trouble connecting to open networks. What file did you change? What modifications did you make? -- Ernesto > > /Josep > > > > > MEF > > > > -- > > Mary Ellen Foster > > http://homepages.inf.ed.ac.uk/mef/ > > > From josep.puigdemont at gmail.com Sun Jan 21 23:07:58 2007 From: josep.puigdemont at gmail.com (Josep Puigdemont) Date: Mon, 22 Jan 2007 00:07:58 +0100 Subject: ERROR: Could not find Intel PRO/Wireless 3945ABG In-Reply-To: <1169418756.5008.2.camel@panther> References: <1169266349.3979.1.camel@panther> <200701210353.l0L3r79w023706@laptop13.inf.utfsm.cl> <45B33AB4.9010405@gmail.com> <1169389633.3460.72.camel@baldrick.mine.nu> <1169418756.5008.2.camel@panther> Message-ID: <1169420878.4810.17.camel@baldrick.mine.nu> El dg 21 de 01 del 2007 a les 17:32 -0500, en/na Ernest L. Williams Jr. va escriure: > On Sun, 2007-01-21 at 15:27 +0100, Josep Puigdemont wrote: > > Hi, > > > > El dg 21 de 01 del 2007 a les 12:57 +0000, en/na Mary Ellen Foster va > > escriure: > > > On 21/01/07, dragoran wrote: > > > > I am using 1.2.0 without any problems. > > > > What do you mean by doesn't work? > > > > > > For me, anyway, NetworkManager never gets past "stage 2" (28% > > > connected), even if I'm connecting to an open access point with a > > > strong signal. Trying to connect without NetworkManager has similar > > > results, in that it sees things but doesn't associate. > > > > > > Are there people who are successfully using these drivers? I've tried > > > a few times and so far with no joy. > > > > I'm not sure if it was the same, but I also had problems connecting to > > open access points with strong signal. > > Then I thought it could be due to IPv6, because I could see some > > messages in the log about not being able to get an IP or something. > > Although I I thought I had it disabled, I manually changed the IPv6 > > setting in /etc/sysconfig/network, and that did the trick for me. > > My problems could be due to something else, I'm not sure, but since then > > I have no trouble connecting to open networks. > What file did you change? What modifications did you make? The file was: /etc/sysconfig/network I changed NETWORKING_IPV6=yes for NETWORKING_IPV6=no /Josep > > > -- Ernesto > > > > > > > /Josep > > > > > > > > MEF > > > > > > -- > > > Mary Ellen Foster > > > http://homepages.inf.ed.ac.uk/mef/ > > > > > > From wdhammond at earthlink.net Mon Jan 22 04:04:27 2007 From: wdhammond at earthlink.net (wayne) Date: Sun, 21 Jan 2007 22:04:27 -0600 Subject: fedora-test-list Digest, Vol 35, Issue 27 In-Reply-To: <20070121190951.876a6fb7.mschwendt.tmp0701.nospam@arcor.de> References: <20070121141303.2770973421@hormel.redhat.com> <45B39E6A.3030208@earthlink.net> <20070121190951.876a6fb7.mschwendt.tmp0701.nospam@arcor.de> Message-ID: <45B437CB.9000507@earthlink.net> Michael Schwendt wrote: > On Sun, 21 Jan 2007 11:10:02 -0600, wayne wrote: > > >>> Error: Missing Dependency: libSDL_gfx.so.13 is needed by package perl-SDL >>> >>> >>> >> I did a search on the error message and found http://www.ferzkopp.net/joomla/content/view/19/14/ >> which explains the reason for the error as: >> > > No, all this does not apply to Fedora until the SDL_gfx packager does > an upgrade to a newer SDL_gfx upstream release. > If libSDL_gfx.so.13 was on my computer and was not recognized as such, what would cause that? That was the symbolic link available but yum didn't recognize the it as such as that package did not meet the dependency requirements and the whole process failed. Attempts to > >> fix would be to locate the .so file using "locate SDL_gfx | grep .so" >> and making a symbolic link to the missing dependency as in "ln -s >> /usr/lib/SDL_gfx.so.0.0.15 /usr/lib/SDL_gfx.so.13". A newer .15 RPM >> might requires some scripts to do this automatically - I don't know how >> to set this up (that's why there is no .15 RPM right now.) >> > > This is not a fix but a poor hack. The fact that you have a > SDL_gfx.so.0.0.15 proves that you have downloaded an SDL_gfx package from > a non-Fedora repository. It is an incompatible package upgrade which > breakes the dependencies. > > Which repos could cause that? I believe the only one I have that is not Fedora is for NVidia drivers, and I only enable it when the kernel is updated so that I can use my NVidia graphics card. >> Posted by Maurizio Loreti, whose homepage is here >> on 01/01/2007 at 14:19 >> >> I resolved the problem temporarily by removing frozen-bubble and >> perl-SDL which are the only applications on my computer requiring >> libSDL_gfx. I then had to go to /var/lib/rpm and delete all of the db >> files and rebuild the database with rpm -vv --rebuilddb >> This fixed the problem with updates. >> >> I am hesitant to reinstall frozen-bubble until this problem is resolved. >> > > Just revisit my reply to your original message. You sound confused. > Messing with files in /var/lib/rpm was not necessary. > You are right, I am confused. Where would you go to find answers to error messages? Is google still my friend? I kept getting error messages during yum -y update attempts. After "yum remove frozen-bubble" and "yum remove perl-SDL" attempting to run "yum -y update" generated a lockup of the terminal session with many lines of ascii characters. Also messages about a corrupt database. "rpm --vv --rebuilddb" did not work. After "cd /var/lib/rpm" then "rm -f *.00*" I was able to successfully use "rpm -vv --rebuilddb" and then run "yum -y update". Why is removing the db files and rebuilding wrong? Is there a better solution? BTW, I did a backup of the directory first in case the files have some information that could be useful for troubleshooting. Thank you for your help. Also, after I received this response from you, I received the below from the website from the above link: Wayne, the problem comes from a long-standing bug in the SDl_gfx distro in that the micro version was updated as 2.0.1, 2.0.2, .... but the .so library version was updated as well to .so.1, .so.2 - in version 2.0.14 this was changed to a version .so.2 (which is the correct way). This is documented in the changelog. Since I am not making the RPMs, I cannot change the Fedora behavior. What is missing is probably a manual script that fixes the library version numbers when going from .13 to anything above. I'll try to contact people on the Fedora list to get this resolved. Until then please try the following: - you can try to locate the new SDL_gfx rpm, download it manually and force an installation using "rpm -Uvh --force --nodeps *.rpm" - you can try to remove the package that is dependent on libSDL_gfx.so.13 Bye Andreas > Email: wdhammond at earthlink.net > whose homepage is: http://glenmeadows.us > Comment: I have been trying to update my system (Fedora Core 6) for > more than a month now, and the update keeps failing with an > error:Error: Missing Dependency: libSDL_gfx.so.13 is needed by package > perl-SDLrnI tried creating the symbolic link noted in your 1/1/2007 > post above, but that didn't work. How long before this issue is > resolved? I have a utility running that reports 115 updates available, > and I cannot update at all. > Regards, -- Wayne www.glenmeadows.us "I cannot imagine a God who rewards and punishes the objects of his creation, whose purposes are modeled after our own -- a God, in short, who is but a reflection of human frailty. Neither can I believe that the individual survives the death of his body, although feeble souls harbor such thoughts through fear or ridiculous egotism." [Einstein] -------------- next part -------------- An HTML attachment was scrubbed... URL: From mschwendt.tmp0701.nospam at arcor.de Mon Jan 22 07:00:37 2007 From: mschwendt.tmp0701.nospam at arcor.de (Michael Schwendt) Date: Mon, 22 Jan 2007 08:00:37 +0100 Subject: SDL_gfx - Re: fedora-test-list Digest, Vol 35, Issue 27 In-Reply-To: <45B437CB.9000507@earthlink.net> References: <20070121141303.2770973421@hormel.redhat.com> <45B39E6A.3030208@earthlink.net> <20070121190951.876a6fb7.mschwendt.tmp0701.nospam@arcor.de> <45B437CB.9000507@earthlink.net> Message-ID: <20070122080037.e7044a3c.mschwendt.tmp0701.nospam@arcor.de> On Sun, 21 Jan 2007 22:04:27 -0600, wayne wrote: > If libSDL_gfx.so.13 was on my computer and was not recognized as such, > what would cause that? An upgrade to an incompatible SDL_gfx package provided in a non-Fedora repository. Or a hopelessly broken RPM database. Yum *does* see the installed libSDL_gfx.so.13 just like rpm -qf /usr/lib/libSDL_gfx* does, e.g. yum list SDL_gfx *But* if there is a package upgrade to the libSDL_gfx.so.0.0.15 you've talked of, the old files are not available anymore and are not in the transaction check either. They would be gone with the upgrade, which fails because other files still need the older SDL_gfx package. So, look into what SDL_gfx package version is installed and what package would be installed by "yum upgrade". Find out where it comes from. > That was the symbolic link available but yum > didn't recognize the it as such as that package did not meet the > dependency requirements and the whole process failed. With all due respect, this is nonsense. "rpm -ql SDL_gfx" lists the files *any* symlinks included in the package, and the symlink is included, too. > Which repos could cause that? I believe the only one I have that is not > Fedora is for NVidia drivers, and I only enable it when the kernel is > updated so that I can use my NVidia graphics card. Instead of guessing that you could simply verify which repositories you have enabled. You've talked about a version of SDL_gfx that is not provided in Fedora Extras 6 and "Development" packages yet. Where does it come from? > I kept getting error messages during yum -y update attempts. After "yum > remove frozen-bubble" and "yum remove perl-SDL" attempting to run "yum > -y update" generated a lockup of the terminal session with many lines of > ascii characters. Also messages about a corrupt database. "rpm --vv > --rebuilddb" did not work. After "cd /var/lib/rpm" then "rm -f *.00*" I > was able to successfully use "rpm -vv --rebuilddb" and then run "yum -y > update". Well, can you accept that all this is abnormal behaviour? You cover multiple problems in one mail. Problems with an incompatible SDL_gfx package from an unknown location and corruption with RPM. That doesn't make it easy if the investigation work is not done by you. > Also, after I received this response from you, I received the below from > the website from the above link: That is irrelevant. You search in wrong places. SDL_gfx in Fedora Extras is still at v2.0.13. Only if you mess with upstream package releases or non-Fedora packages, you run into the problems with the SONAME change. > Until then please try the following: > - you can try to locate the new SDL_gfx rpm, download it manually and > force an installation using "rpm -Uvh --force --nodeps *.rpm" And this is a big fat DO NOT. Whoever has recommended those rpm options has given you very bad advice. It's not just that --force is permitted to overwrite arbitrary files from other packages, --nodeps ignores package dependencies altogether and only increases problems with further installs. From bruno at wolff.to Mon Jan 22 07:31:05 2007 From: bruno at wolff.to (Bruno Wolff III) Date: Mon, 22 Jan 2007 01:31:05 -0600 Subject: Inclusion of Grub 2 in FC7 ? In-Reply-To: References: Message-ID: <20070122073105.GA2318@wolff.to> On Sun, Jan 21, 2007 at 05:44:43 +0000, "monty19@ hotmail.com" wrote: > I would like to see it included, at least as an option. I gather that it > is too late for FC7, but it would be nice to be able to boot to a root > partition on a Software RAID when F8 comes out... I tried cvs a week or so ago and the software raid part didn't seem to work. I had the raid module loaded but listing devices didn't show any of my raid arrays. I asked about in on the grub-devel list and didn't get a response. Also of note for getting into FC7 is that the last change to cvs was December 13th, so there seems to be some kind of lull in development right now. From buildsys at redhat.com Mon Jan 22 11:24:27 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Mon, 22 Jan 2007 06:24:27 -0500 Subject: rawhide report: 20070122 changes Message-ID: <200701221124.l0MBOREI020990@hs20-bc2-6.build.redhat.com> Updated Packages: bison-2.3-3.fc7 --------------- * Sun Jan 21 2007 Roland McGrath - 2.3-3 - Canonicalize post/preun use of install-info. - Resolves: 223679 cpio-2.6-23.fc7 --------------- * Mon Jan 22 2007 Peter Vrabec 2.6-23 - fix non-failsafe install-info use in scriptlets (#223682) emacspeak-25-1.fc7 ------------------ * Mon Jan 22 2007 Jens Petersen - 25-1 - update to version 25 - update emacspeak-tcl-pkgreq-tclx.patch - protect install-info in %post and %preun (Ville Skytt??, #223685) gettext-0.16.1-3.fc7 -------------------- * Mon Jan 22 2007 Jens Petersen - 0.16.1-3 - protect install-info in %post and %preun (Ville Skytt??, #223689) gnome-desktop-2.17.90-1.fc7 --------------------------- * Sun Jan 21 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 - Drop some long-obsolete images - Clean up BuildRequires gnome-panel-2.17.90-1.fc7 ------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 - Clean up BuildRequires - Allow user switching from the logout dialog gnome-session-2.17.90-1.fc7 --------------------------- * Sun Jan 21 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 - Clean up BuildRequires ncurses-5.6-2.20070120.fc7 -------------------------- * Sun Jan 21 2007 Miroslav Lichvar 5.6-2.20070120 - update to patch 20070120 - don't depend on bash, drop resetall script - include rxvt-unicode description tar-2:1.15.1-25.fc7 ------------------- * Wed Jan 03 2007 Peter Vrabec 2:1.15.1-25 - fix non-failsafe install-info use in scriptlets (#223718) Broken deps for i386 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for ppc64 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for x86_64 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for ia64 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for s390 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 Broken deps for ppc ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for s390x ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl From pbrobinson at gmail.com Mon Jan 22 12:26:53 2007 From: pbrobinson at gmail.com (Peter Robinson) Date: Mon, 22 Jan 2007 12:26:53 +0000 Subject: FC6, kernel 2.6.19 and software suspend Message-ID: <5256d0b0701220426o54aa7cd7hdee11ce081a1e34a@mail.gmail.com> Hi All, A while ago (in the test-2 or test-3 stage of FC6) I got a new laptop. A Dell Latitude D620. My old laptop was a Latitude D600 running FC5. I installed the testing release of FC6 because the D620 is a Core Duo chip and chipset and FC6 looked to have better support for that hardware. The one thing that never seemed to work was the resume from suspend, it worked perfectly on FC5 on the D600. I seem to remember I mentioned it on the list in one of the discussions about it. Last night I finally got around to playing with it some more. It seems the reason it doesn't resume (lots of errors spewed to the console about ata.1) is due to the fact we have a corporate policy of having HDD passwords on all laptops. If I temporarily remove the HDD password it resumes perfectly on 2.6.18 but it doesn't on 2.6.19 (hence the mention of 2.6.19 in the subject). So is this a known problem with HDD passwords using a SATA chip (libata presumably) or should I bugzilla it? I seem to remember an age ago there was this issue somewhere with another ide laptop. Peter From tmraz at redhat.com Mon Jan 22 13:10:48 2007 From: tmraz at redhat.com (Tomas Mraz) Date: Mon, 22 Jan 2007 14:10:48 +0100 Subject: rawhide report: 20070120 changes In-Reply-To: <200701220721.23081.bernie@develer.com> References: <200701201127.l0KBRwLc007330@hs20-bc2-6.build.redhat.com> <200701220721.23081.bernie@develer.com> Message-ID: <1169471448.3244.3.camel@perun.kabelta.loc> On Mon, 2007-01-22 at 07:21 +0100, Bernardo Innocenti wrote: > On Saturday 20 January 2007 12:27, buildsys at redhat.com wrote: > > > pam-0.99.7.0-1.fc7 > > ------------------ > > * Fri Jan 19 2007 Tomas Mraz 0.99.7.0-1 > > - upgrade to new upstream version > > - drop pam_stack module as it is obsolete > > - some changes to silence rpmlint > > Is it just me or after this update anybody and his dog can > login without typing a valid password in any account? > > See: > > bernie at bender:~$ su - openwrt > Password: > openwrt at bender:~$ > openwrt at bender:~$ logout > openwrt at bender:~$ logout > bender:/etc/pam.d# grep openwrt /etc/passwd /etc/shadow > /etc/passwd:openwrt:x:501:501:openwrt compiler:/usr/local/src/openwrt:/bin/bash > /etc/shadow:openwrt:!!:13529:::::: > > I've installed this update yesterday in the evening and today > there were already rootkits and irc bots everywhere :) > Well it is not just you. And I am ashamed I didn't catch this problem when reviewing changes in new upstream version. :( It won't allow anyone to any account but only accounts with only two characters in passwd field - like !! and similar. It is very serious anyway. Should be fixed in pam-0.99.7.0-2.fc7. -- Tomas Mraz No matter how far down the wrong road you've gone, turn back. Turkish proverb From clumens at redhat.com Mon Jan 22 15:32:22 2007 From: clumens at redhat.com (Chris Lumens) Date: Mon, 22 Jan 2007 10:32:22 -0500 Subject: kickstart testing needed Message-ID: <20070122153221.GJ13118@exeter.boston.redhat.com> I recently reworked all the pykickstart guts, which of course means a bunch of places where new bugs could be lurking. Now I went through and fixed a bunch before I unleashed this new stuff on the world, but other people have much more creative kickstart files. So could some people please do some testing with a tree from January 20 or later and if you find bugs specific to kickstart (as in, not regular anaconda problems or packaging problems) please file them against anaconda or pykickstart? Thanks. - Chris From ernesto at ornl.gov Mon Jan 22 15:47:30 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Mon, 22 Jan 2007 10:47:30 -0500 Subject: Bluetooth Logitech mouse Message-ID: <1169480850.4150.12.camel@panther> Hi, Can someone give me a reference for how to get my new logitech bluetooth mouse going? I have been able to do the following so far: =========================================================== [root at panther ~]# hcitool inq Inquiring ... 00:07:61:66:AF:56 clock offset: 0x68b4 class: 0x002580 [root at panther ~]# l2ping 00:07:61:66:AF:56 Ping: 00:07:61:66:AF:56 from 00:16:41:73:C3:5F (data size 44) ... 44 bytes from 00:07:61:66:AF:56 id 0 time 45.38ms 44 bytes from 00:07:61:66:AF:56 id 1 time 21.84ms 44 bytes from 00:07:61:66:AF:56 id 2 time 22.78ms 44 bytes from 00:07:61:66:AF:56 id 3 time 19.83ms =========================================================================== Thanks, Ernest From jeff at ocjtech.us Mon Jan 22 16:06:33 2007 From: jeff at ocjtech.us (Jeffrey C. Ollie) Date: Mon, 22 Jan 2007 10:06:33 -0600 Subject: Bluetooth Logitech mouse In-Reply-To: <1169480850.4150.12.camel@panther> References: <1169480850.4150.12.camel@panther> Message-ID: <1169481993.3845.12.camel@lt21223.campus.dmacc.edu> On Mon, 2007-01-22 at 10:47 -0500, Ernest L. Williams Jr. wrote: > Hi, > > Can someone give me a reference for how to get my new logitech bluetooth > mouse going? The Loigitech BlueTooth mouse is a HID device, so you need the hidd command: hidd --search hidd --connect
Should do the trick. Jeff -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From mbarnes at redhat.com Mon Jan 22 17:06:04 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Mon, 22 Jan 2007 12:06:04 -0500 Subject: Fedora Core 6 Test Update: gnome-python2-extras-2.14.2-8.fc6 Message-ID: <200701221706.l0MH64CD006280@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-104 2007-01-22 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-python2-extras Version : 2.14.2 Release : 8.fc6 Summary : The sources for additional. PyGNOME Python extension modules. Description : The gnome-python-extra package contains the source packages for additional Python bindings for GNOME. It should be used together with gnome-python. --------------------------------------------------------------------- Update Information: This update corrects a packaging error that caused the egg.recent module to be omitted from the package. --------------------------------------------------------------------- * Sat Jan 20 2007 Matthew Barnes - 2.14.2-8.fc6 - Add missing BuildRequires gnome-python2-devel (RH bug #223602). * Fri Jan 5 2007 Matthew Barnes - 2.14.2-7 - Require firefox-1.5.0.9 exactly. This will introduce a dependency conflict the next time libgtkembedmoz.so changes location, to ensure this package gets rebuilt (RH bug #215163). * Tue Nov 21 2006 Matthew Barnes - 2.14.2-6 - Rebuild against firefox (again). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ aa360108aab6daaf58c4e31faab7ffce0bb42f6c SRPMS/gnome-python2-extras-2.14.2-8.fc6.src.rpm aa360108aab6daaf58c4e31faab7ffce0bb42f6c noarch/gnome-python2-extras-2.14.2-8.fc6.src.rpm 4148bbd13a9c276760e47c894e608bfb75ca4ceb ppc/gnome-python2-extras-2.14.2-8.fc6.ppc.rpm 829b171af1390803c4cc8ce442ff0042601618be ppc/gnome-python2-gtkspell-2.14.2-8.fc6.ppc.rpm adbaadb5e9e3986140bf64104479e6f414b5b239 ppc/gnome-python2-gtkmozembed-2.14.2-8.fc6.ppc.rpm cb478d95fca92088bd7b3a89a1d7ed96aef58d44 ppc/debug/gnome-python2-extras-debuginfo-2.14.2-8.fc6.ppc.rpm ddedd0ce3a33d52c6208ff8ecee4606dc74fd05f ppc/gnome-python2-gtkhtml2-2.14.2-8.fc6.ppc.rpm a263230edbdc87bc545b33510e3ba37bb06f5bc8 ppc/gnome-python2-libegg-2.14.2-8.fc6.ppc.rpm 68ade21fb11e43ecf8405b8412d666ead7642c52 x86_64/gnome-python2-gtkspell-2.14.2-8.fc6.x86_64.rpm 30ba67bb5394f3d7086d2846391334fcc8c9a9ca x86_64/gnome-python2-extras-2.14.2-8.fc6.x86_64.rpm f5a2322b4235c06f9d406a2b9d51696312322d32 x86_64/gnome-python2-gtkhtml2-2.14.2-8.fc6.x86_64.rpm e2735886b4d675f550346cbc2f8e3b0ca6f2175b x86_64/debug/gnome-python2-extras-debuginfo-2.14.2-8.fc6.x86_64.rpm f4723182cdcc68ba7e9695e46feabf327ce34526 x86_64/gnome-python2-gtkmozembed-2.14.2-8.fc6.x86_64.rpm 46bf8ad36b8ec0c6ef71b14d6a0039aa74a5f8ca x86_64/gnome-python2-libegg-2.14.2-8.fc6.x86_64.rpm c809df6f63cbbdfe0844e6455997de7d37b25d2e i386/gnome-python2-gtkspell-2.14.2-8.fc6.i386.rpm 1b1f9d32525029e3cd3cf6df3e61b57b7e07f719 i386/gnome-python2-gtkmozembed-2.14.2-8.fc6.i386.rpm 879c407ebb4333d6d28ab97e82fb0ea56c107737 i386/gnome-python2-libegg-2.14.2-8.fc6.i386.rpm aaa095452f6fd6dc155edc210b7f774f062b58df i386/gnome-python2-extras-2.14.2-8.fc6.i386.rpm 3a113d711005befd407389e11d888fba2e3a344a i386/debug/gnome-python2-extras-debuginfo-2.14.2-8.fc6.i386.rpm 2f28e3fbedf1b5d598e590695b8454fb071c9b29 i386/gnome-python2-gtkhtml2-2.14.2-8.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From dwalsh at redhat.com Mon Jan 22 17:07:50 2007 From: dwalsh at redhat.com (Daniel Walsh) Date: Mon, 22 Jan 2007 12:07:50 -0500 Subject: Fedora Core 6 Test Update: policycoreutils-1.33.15-1.fc6 Message-ID: <200701221707.l0MH7opH006793@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-105 2007-01-22 --------------------------------------------------------------------- Product : Fedora Core 6 Name : policycoreutils Version : 1.33.15 Release : 1.fc6 Summary : SELinux policy core utilities. Description : Security-enhanced Linux is a feature of the Linux?? kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement??, Role-based Access Control, and Multi-level Security. policycoreutils contains the policy core utilities that are required for basic operation of a SELinux system. These utilities include load_policy to load policies, setfiles to label filesystems, newrole to switch roles, and run_init to run /etc/init.d scripts in the proper context. --------------------------------------------------------------------- * Wed Jan 17 2007 Dan Walsh 1.33.15-1 - Update to upstream * Merged unicode-to-string fix for seobject audit from Dan Walsh. * Merged man page updates to make "apropos selinux" work from Dan Walsh. * Tue Jan 16 2007 Dan Walsh 1.33.14-1 * Merged newrole man page patch from Michael Thompson. * Merged patch to fix python unicode problem from Dan Walsh. * Tue Jan 16 2007 Dan Walsh 1.33.12-3 - Fix handling of audit messages for useradd change Resolves: #222159 * Fri Jan 12 2007 Dan Walsh 1.33.12-2 - Update man pages by adding SELinux to header to fix apropos database Resolves: #217881 * Tue Jan 9 2007 Dan Walsh 1.33.12-1 - Want to update to match api - Update to upstream * Merged newrole securetty check from Dan Walsh. * Merged semodule patch to generalize list support from Karl MacMillan. Resolves: #200110 * Tue Jan 9 2007 Dan Walsh 1.33.11-1 - Update to upstream * Merged fixfiles and seobject fixes from Dan Walsh. * Merged semodule support for list of modules after -i from Karl MacMillan. * Tue Jan 9 2007 Dan Walsh 1.33.10-1 - Update to upstream * Merged patch to correctly handle a failure during semanage handle creation from Karl MacMillan. * Merged patch to fix seobject role modification from Dan Walsh. * Fri Jan 5 2007 Dan Walsh 1.33.8-2 - Stop newrole -l from working on non secure ttys Resolves: #200110 * Thu Jan 4 2007 Dan Walsh 1.33.8-1 - Update to upstream * Merged patches from Dan Walsh to: - omit the optional name from audit2allow - use the installed python version in the Makefiles - re-open the tty with O_RDWR in newrole * Wed Jan 3 2007 Dan Walsh 1.33.7-1 - Update to upstream * Patch from Dan Walsh to correctly suppress warnings in load_policy. * Tue Jan 2 2007 Dan Walsh 1.33.6-9 - Fix fixfiles script to use tty command correctly. If this command fails, it should set the LOGFILE to /dev/null Resolves: #220879 * Wed Dec 20 2006 Dan Walsh 1.33.6-8 - Remove hard coding of python2.4 from Makefiles * Tue Dec 19 2006 Dan Walsh 1.33.6-7 - add exists switch to semanage to tell it not to check for existance of Linux user Resolves: #219421 * Mon Dec 18 2006 Dan Walsh 1.33.6-6 - Fix audit2allow generating reference policy - Fix semanage to manage user roles properly Resolves: #220071 * Fri Dec 8 2006 Dan Walsh 1.33.6-5 - Update po files - Fix newrole to open stdout and stderr rdrw so more will work on MLS machines Resolves: #216920 * Thu Dec 7 2006 Jeremy Katz - 1.33.6-4 - rebuild for python 2.5 * Wed Dec 6 2006 Dan Walsh 1.33.6-3 - Update po files Resolves: #216920 * Fri Dec 1 2006 Dan Walsh 1.33.6-2 - Update po files Resolves: #216920 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ e7a42245561d3c3092c1a56e3fd3de8617cb206e SRPMS/policycoreutils-1.33.15-1.fc6.src.rpm e7a42245561d3c3092c1a56e3fd3de8617cb206e noarch/policycoreutils-1.33.15-1.fc6.src.rpm 54e648d26027854b6b3d5630092b98e85ea50dde ppc/policycoreutils-newrole-1.33.15-1.fc6.ppc.rpm d27daaf22216828a7e8f3f0a80505b65d679ab24 ppc/policycoreutils-gui-1.33.15-1.fc6.ppc.rpm 90fb07a49e401c530e3b20f52b7fbf374a3146af ppc/debug/policycoreutils-debuginfo-1.33.15-1.fc6.ppc.rpm 6771ee9cc1391a83fd8bcab60e12bb6df5f95c60 ppc/policycoreutils-1.33.15-1.fc6.ppc.rpm 4e9ea8c92b48602fb3eba2fa30d2b9cee7c2fa20 x86_64/debug/policycoreutils-debuginfo-1.33.15-1.fc6.x86_64.rpm 7e389f106b0a813dd2a7fc695b763ec13f466049 x86_64/policycoreutils-newrole-1.33.15-1.fc6.x86_64.rpm ef007066109cb00b537dfc39799e0bcc79750e6c x86_64/policycoreutils-gui-1.33.15-1.fc6.x86_64.rpm 3db0123543cc3c2d9d7860d4280081f87aaf6c9f x86_64/policycoreutils-1.33.15-1.fc6.x86_64.rpm 27787c98d801ff24d5f2030b8c96440cad8dd7e5 i386/policycoreutils-gui-1.33.15-1.fc6.i386.rpm 25175ff92d95df3aae079b560d14e4c97edd3fd8 i386/debug/policycoreutils-debuginfo-1.33.15-1.fc6.i386.rpm 336d49dd3219c73de71fb6f3fbb2a1c69c003273 i386/policycoreutils-newrole-1.33.15-1.fc6.i386.rpm 4173de4036beee96157a47f5cad28e11b73af994 i386/policycoreutils-1.33.15-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mbarnes at redhat.com Mon Jan 22 17:11:50 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Mon, 22 Jan 2007 12:11:50 -0500 Subject: [SECURITY] Fedora Core 6 Test Update: libsoup-2.2.99-1.fc6 Message-ID: <200701221711.l0MHBod1008093@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-109 2007-01-22 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libsoup Version : 2.2.99 Release : 1.fc6 Summary : Soup, an HTTP library implementation Description : Libsoup is an HTTP library implementation in C. It was originally part of a SOAP (Simple Object Access Protocol) implementation called Soup, but the SOAP and non-SOAP parts have now been split into separate packages. libsoup uses the Glib main loop and is designed to work well with GTK applications. This enables GNOME applications to access HTTP servers on the network in a completely asynchronous fashion, very similar to the Gtk+ programming model (a synchronous operation mode is also supported for those who want it). --------------------------------------------------------------------- Update Information: Update to the latest libsoup 2.2 release. This release fixes a security flaw that causes the libsoup server to crash when it receives a malformed HTTP GET header. --------------------------------------------------------------------- * Thu Jan 18 2007 Matthew Barnes - 2.2.99-1.fc6 - Update to 2.2.99 * Tue Nov 21 2006 Matthew Barnes - 2.2.98-1.fc6 - Update to 2.2.98 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 760abc30a7442c0d77c9430fd09141262e8888b1 SRPMS/libsoup-2.2.99-1.fc6.src.rpm 760abc30a7442c0d77c9430fd09141262e8888b1 noarch/libsoup-2.2.99-1.fc6.src.rpm 246fdbaaf67f02d3cafce8098960e0632c852b4e ppc/debug/libsoup-debuginfo-2.2.99-1.fc6.ppc.rpm e61d39456a800ee72379ce7ffd76919365b8f941 ppc/libsoup-devel-2.2.99-1.fc6.ppc.rpm c7ff1c716d1042cd9475fb1715821af2f1b01f5a ppc/libsoup-2.2.99-1.fc6.ppc.rpm f399c3c9c836c8906d7f533de99e38a7625a065b x86_64/debug/libsoup-debuginfo-2.2.99-1.fc6.x86_64.rpm ee813b337fa56f7fa5d4747b2efebe91672d6d79 x86_64/libsoup-2.2.99-1.fc6.x86_64.rpm df4229bc0871f41a4d1a60d45f7c8d8a1eb6c262 x86_64/libsoup-devel-2.2.99-1.fc6.x86_64.rpm d19256c49b58bc77e37d999bf5bfb586acf67fc7 i386/libsoup-devel-2.2.99-1.fc6.i386.rpm 1bbd57490de4e1f99c84ae1585fde339e4e05c2e i386/libsoup-2.2.99-1.fc6.i386.rpm 3fdb380214333c320a8fb75522c57dba71dd3b64 i386/debug/libsoup-debuginfo-2.2.99-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From ikent at redhat.com Mon Jan 22 17:15:35 2007 From: ikent at redhat.com (Ian Kent) Date: Mon, 22 Jan 2007 12:15:35 -0500 Subject: Fedora Core 6 Test Update: autofs-5.0.1-0.rc3.10 Message-ID: <200701221715.l0MHFZ8t009274@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-113 2007-01-22 --------------------------------------------------------------------- Product : Fedora Core 6 Name : autofs Version : 5.0.1 Release : 0.rc3.10 Summary : A tool for automatically mounting and unmounting filesystems Description : autofs is a daemon which automatically mounts filesystems when you use them, and unmounts them later when you are not using them. This can include network filesystems, CD-ROMs, floppies, and so forth. --------------------------------------------------------------------- * Thu Jan 18 2007 Ian Kent - 5.0.1-0.rc3.10 - correct check for busy offset mounts before offset umount (bz 222872). * Wed Jan 17 2007 Ian Kent - 5.0.1-0.rc3.8 - fix another expire regression introduced in the "mitigate manual umount" patch (bz 222872). - replace patch 3 with rc3 variant instead of the rc2 one. * Mon Jan 15 2007 Ian Kent - 5.0.1-0.rc3.6 - ignore "winbind" if it appears in "automount" nsswitch.conf (bz 214632). * Wed Jan 10 2007 Ian Kent - 5.0.1-0.rc3.4 - remove fullstop from Summary tag. - change Buildroot to recommended form. - replace Prereq with Requires. --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ e823eb967fb070b776e806694e349904dd61b153 SRPMS/autofs-5.0.1-0.rc3.10.src.rpm e823eb967fb070b776e806694e349904dd61b153 noarch/autofs-5.0.1-0.rc3.10.src.rpm 4727a2975f9e44cb4eb524efdbb89f8ac4d97781 ppc/debug/autofs-debuginfo-5.0.1-0.rc3.10.ppc.rpm d5ee17197709e67ec44a40ef90a0a4b266db9c46 ppc/autofs-5.0.1-0.rc3.10.ppc.rpm db61bcc95fb84995f619797844814129059b0392 x86_64/autofs-5.0.1-0.rc3.10.x86_64.rpm ab5c2b145132d7c7a2048d3bd249f58185aaecef x86_64/debug/autofs-debuginfo-5.0.1-0.rc3.10.x86_64.rpm 5181158b2dfcaebc73cbc763178d0a868b476746 i386/debug/autofs-debuginfo-5.0.1-0.rc3.10.i386.rpm 57ea1a4924f90d086c39f895ac8028b36e747360 i386/autofs-5.0.1-0.rc3.10.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From jakub at redhat.com Mon Jan 22 17:18:23 2007 From: jakub at redhat.com (Jakub Jelinek) Date: Mon, 22 Jan 2007 12:18:23 -0500 Subject: Fedora Core 6 Test Update: binutils-2.17.50.0.6-3.fc6 Message-ID: <200701221718.l0MHIN4w009882@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-116 2007-01-22 --------------------------------------------------------------------- Product : Fedora Core 6 Name : binutils Version : 2.17.50.0.6 Release : 3.fc6 Summary : A GNU collection of binary utilities. Description : Binutils is a collection of binary utilities, including ar (for creating, modifying and extracting from archives), as (a family of GNU assemblers), gprof (for displaying call graph profile data), ld (the GNU linker), nm (for listing symbols from object files), objcopy (for copying and translating object files), objdump (for displaying information from object files), ranlib (for generating an index for the contents of an archive), size (for listing the section sizes of an object or archive file), strings (for listing printable strings from files), strip (for discarding symbols), and addr2line (for converting addresses to file and line). --------------------------------------------------------------------- * Fri Jan 19 2007 Jakub Jelinek 2.17.50.0.6-3.fc6 - 10x linking speedup on large C++ apps (#223181) - fix tekhex reader * Thu Dec 21 2006 Jakub Jelinek 2.17.50.0.6-2.fc6 - update to 2.17.50.0.6 - fix for section relative linker script defined symbols in empty sections (#212032, BZ#3267) - fix handling of DW_CFA_set_loc in .eh_frame optimizations - fix R_PPC_{PLT,GOT{,_TLSGD,_TLSLD,_TPREL,_DTPREL}}16_HA relocation handling with weak undefined symbols (Alan Modra, #211094) - fix --cref (#212099) - fix --emit-relocs on ppc64 (#211991) - fix popcnt instruction assembly and disassembly on amd64 (#214767) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ a46cb179f1cd382ae81c333ada35ef183d01fad9 SRPMS/binutils-2.17.50.0.6-3.fc6.src.rpm a46cb179f1cd382ae81c333ada35ef183d01fad9 noarch/binutils-2.17.50.0.6-3.fc6.src.rpm 92fa6c3e0b464edc77e9415bb7d931cd583c8610 ppc/binutils-2.17.50.0.6-3.fc6.ppc.rpm 6fdb370ebe8aa76d3cc0ba5c2832832a9a4d104b ppc/binutils-devel-2.17.50.0.6-3.fc6.ppc.rpm cdbeedebce7c8f6b428f817345258140e272263b ppc/debug/binutils-debuginfo-2.17.50.0.6-3.fc6.ppc.rpm dad881f10ccf84ab7e2bf4c5ab59152bda99e70c x86_64/binutils-devel-2.17.50.0.6-3.fc6.x86_64.rpm 066c75b3492bdef17d30b7812c4837e85b6fc43d x86_64/debug/binutils-debuginfo-2.17.50.0.6-3.fc6.x86_64.rpm 94b7707be9d66f896c338fe6b557ab8cbfddc22a x86_64/binutils-2.17.50.0.6-3.fc6.x86_64.rpm af32644daff168a29c49ff88214d9a54b0d01c72 i386/debug/binutils-debuginfo-2.17.50.0.6-3.fc6.i386.rpm 5195054b37156d453d8f023c794861d4a6ee74ce i386/binutils-devel-2.17.50.0.6-3.fc6.i386.rpm ce0c83ff8a2e019a5f16c7a69250a18b6e9a7933 i386/binutils-2.17.50.0.6-3.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From rstrode at redhat.com Mon Jan 22 17:20:16 2007 From: rstrode at redhat.com (Raymond Strode) Date: Mon, 22 Jan 2007 12:20:16 -0500 Subject: Fedora Core 6 Test Update: gnome-screensaver-2.16.1-4.fc6 Message-ID: <200701221720.l0MHKGIO010424@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-117 2007-01-22 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-screensaver Version : 2.16.1 Release : 4.fc6 Summary : GNOME Screensaver Description : gnome-screensaver is a screen saver and locker that aims to have simple, sane, secure defaults and be well integrated with the desktop. --------------------------------------------------------------------- Update Information: This update should resolve two problems 1) gnome-screensaver lock dialog freezing up when the user's account is expired. 2) initial keystrokes getting lost before the lock dialog appears --------------------------------------------------------------------- * Fri Jan 19 2007 Ray Strode - 2.16.1-4.fc6 - correctly queue keystrokes so they aren't lost when bringing up lock dialog (bug 206677) - run pam account management modules from correct thread * Fri Nov 10 2006 Ray Strode - 2.16.1-3.fc6 - convert pam messages from users encoding to utf8 before puttin in ui (bug 214681) * Mon Oct 16 2006 Ray Strode - 2.16.1-2.fc6 - backport fixes from fc7 branch * Mon Oct 16 2006 Ray Strode - 2.16.1-1.fc6 - Update to 2.16.1 * Thu Oct 5 2006 Ray Strode - 2.16.0-10.fc6 - report token events from helper process using token name instead of slot id and slot series number, since slot id and slot series number are relative to each process (bug 208018) * Wed Oct 4 2006 Ray Strode - 2.16.0-9.fc6 - Add more debugging messages to help diagnose bug 208018 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ e6f2544f07f0f0038e8c15d23b9e85f4e4994a89 SRPMS/gnome-screensaver-2.16.1-4.fc6.src.rpm e6f2544f07f0f0038e8c15d23b9e85f4e4994a89 noarch/gnome-screensaver-2.16.1-4.fc6.src.rpm f48a914f4e52d1bb67e018f64bad07d19b440fd5 ppc/gnome-screensaver-2.16.1-4.fc6.ppc.rpm 950d20a76fc34da782875777c266b286f85b05eb ppc/debug/gnome-screensaver-debuginfo-2.16.1-4.fc6.ppc.rpm 964a0add04415e4e3fc4700e3f891ff8bbb0ba85 x86_64/debug/gnome-screensaver-debuginfo-2.16.1-4.fc6.x86_64.rpm e1269222a3c2c12efcbd19e79b7f1b69fe88fa07 x86_64/gnome-screensaver-2.16.1-4.fc6.x86_64.rpm 9388c7e14136b82102761ece2a0e6f110e4eb057 i386/gnome-screensaver-2.16.1-4.fc6.i386.rpm 974bb1b48cf443ead1f77618310b8264181ce7cb i386/debug/gnome-screensaver-debuginfo-2.16.1-4.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From jwilson at redhat.com Mon Jan 22 17:21:24 2007 From: jwilson at redhat.com (Jarod Wilson) Date: Mon, 22 Jan 2007 12:21:24 -0500 Subject: Fedora Core 6 Test Update: libdv-1.0.0-1.fc6 Message-ID: <200701221721.l0MHLO69010600@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-118 2007-01-22 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libdv Version : 1.0.0 Release : 1.fc6 Summary : Software decoder for DV format video Description : The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (a.k.a. FireWire or i.Link) interface. libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M. --------------------------------------------------------------------- Update Information: - New upstream release - PIC patch from Mike Frysinger (#146596) - Re-enable asm on i386 --------------------------------------------------------------------- * Fri Jan 19 2007 Jarod Wilson 1.0.0-1 - New upstream release - PIC patch from Mike Frysinger (#146596) - Re-enable asm on i386 * Thu Sep 21 2006 Jarod Wilson 0.104-5 - Disable asm on i386 for now to prevent text relocations in DSO --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 5148b28feb655dcd499e2787fa9ecf6bfeb9b23b SRPMS/libdv-1.0.0-1.fc6.src.rpm 5148b28feb655dcd499e2787fa9ecf6bfeb9b23b noarch/libdv-1.0.0-1.fc6.src.rpm f3fba0e6fa152162232d159b023deaed0aa93256 ppc/libdv-devel-1.0.0-1.fc6.ppc.rpm b158e3e28f97b126372ef529fc2d8dad87c94d8c ppc/libdv-tools-1.0.0-1.fc6.ppc.rpm 1510f2df51fc03959b4435045d9009a0df520ba2 ppc/libdv-1.0.0-1.fc6.ppc.rpm 56cb10df9e3b81abbd5811893ad9f3a4b38cc29e ppc/debug/libdv-debuginfo-1.0.0-1.fc6.ppc.rpm 29cae5b1353e69e3aa60d5b92357276a5ea4cc59 x86_64/libdv-tools-1.0.0-1.fc6.x86_64.rpm a976e1ab87b94d471f940d533e73e405aa3deb73 x86_64/libdv-1.0.0-1.fc6.x86_64.rpm 2b23993e4aa6fd0c4e31ebf29a6bcaf01a862a60 x86_64/debug/libdv-debuginfo-1.0.0-1.fc6.x86_64.rpm 110ffb5e4e569f70b2f99f75ba8217ffaa555e41 x86_64/libdv-devel-1.0.0-1.fc6.x86_64.rpm 5a30e221eaeec9a6cdeb5f47b0741500ae6969ff i386/libdv-devel-1.0.0-1.fc6.i386.rpm a88e13a2dbb57149e2ad6a708bb8608c843d13a9 i386/libdv-1.0.0-1.fc6.i386.rpm b50b3771c9cb06fb32f4b0210603dfe6be172265 i386/libdv-tools-1.0.0-1.fc6.i386.rpm 6750b0901905cb82f87f5e3b3982bd582050ae90 i386/debug/libdv-debuginfo-1.0.0-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From buildsys at redhat.com Mon Jan 22 17:39:06 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Mon, 22 Jan 2007 12:39:06 -0500 Subject: rawhide report: 20070122 changes Message-ID: <200701221739.l0MHd6lR025250@hs20-bc2-6.build.redhat.com> Updated Packages: aspell-12:0.60.5-2.fc7 ---------------------- * Mon Jan 22 2007 Ivana Varekova - 12:0.60.5-2 - Resolves: 223676 fix non-failsafe install-info problem * Tue Jan 02 2007 Ivana Varekova - 12:0.60.5-1 - update to 0.60.4 - cleanup spec file * Wed Nov 08 2006 Ivana Varekova - 12:0.60.4-1 - update to 0.60.4 avahi-0.6.16-1.fc7 ------------------ * Mon Jan 22 2007 Martin Bacovsky - 0.6.16-1.fc7 - Resolves: #221763: CVE-2006-6870 Maliciously crafted packed can DoS avahi daemon - upgrade to new upstream - patch revision - Resolves: #218140: avahi configuration file wants a non-existent group bc-1.06-22 ---------- * Mon Jan 22 2007 Thomas Woerner 1.06-22 - rebuild for ncurses * Wed Jul 12 2006 Jesse Keating - 1.06-21 - rebuild - add missing br automake * Tue Jun 06 2006 Thomas Woerner 1.06-20 - added missing flex build require bind-31:9.3.3-4.fc7 ------------------- * Mon Jan 22 2007 Adam Tkac 31:9.3.3-4.fc7 - package bind-libbind-devel has beed removed (libs has been moved to bind-devel & bind-libs) - Resolves: #214208 * Tue Jan 16 2007 Martin Stransky - 31:9.3.3-3 - fixed a multi-lib issue - Resolves: rhbz#222717 * Thu Jan 04 2007 Martin Stransky - 31:9.3.3-2 - added namedGetForwarders written in shell (#176100), created by Baris Cicek . bison-2.3-3.fc7 --------------- * Sun Jan 21 2007 Roland McGrath - 2.3-3 - Canonicalize post/preun use of install-info. - Resolves: 223679 busybox-1:1.2.2-3.fc7 --------------------- * Mon Jan 22 2007 Ivana Varekova - 1:1.2.2-3 - Resolves: 223620 id output shows context twice - fix iptunnel x kernel-headers problem cpio-2.6-23.fc7 --------------- * Mon Jan 22 2007 Peter Vrabec 2.6-23 - fix non-failsafe install-info use in scriptlets (#223682) ekiga-2.0.4-1.fc7 ----------------- * Mon Jan 22 2007 Daniel Veillard - 2.0.4-1 - Upgrade to ekiga-2.0.4 * Thu Nov 02 2006 Daniel Veillard - 2.0.3-3 - Resolves: rhbz#201535 - fixes build-requires for opal-devel and pwlib-devel * Sat Oct 28 2006 Matthias Clasen - 2.0.3-2 - Rebuild against evolution-data-server 1.9 emacspeak-25-1.fc7 ------------------ * Mon Jan 22 2007 Jens Petersen - 25-1 - update to version 25 - update emacspeak-tcl-pkgreq-tclx.patch - protect install-info in %post and %preun (Ville Skytt??, #223685) gettext-0.16.1-3.fc7 -------------------- * Mon Jan 22 2007 Jens Petersen - 0.16.1-3 - protect install-info in %post and %preun (Ville Skytt??, #223689) gnome-desktop-2.17.90-1.fc7 --------------------------- * Sun Jan 21 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 - Drop some long-obsolete images - Clean up BuildRequires gnome-panel-2.17.90-1.fc7 ------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 - Clean up BuildRequires - Allow user switching from the logout dialog gnome-session-2.17.90-1.fc7 --------------------------- * Sun Jan 21 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 - Clean up BuildRequires gnuplot-4.0.0-16.fc7 -------------------- * Mon Jan 22 2007 Ivana Varekova - 4.0.0-16 - Resolves: 223693 fix non-failsafe install-info problem gperf-3.0.2-3.fc7 ----------------- * Mon Jan 22 2007 Florian La Roche - rhbz#223695 gpm-1.20.1-80.fc7 ----------------- * Mon Jan 22 2007 Tomas Janousek - 1.20.1-80 - forgot to add the patch for #168076 * Mon Jan 22 2007 Tomas Janousek - 1.20.1-79 - added disttag to release * Mon Jan 22 2007 Tomas Janousek - 1.20.1-78 - refuse connections while waiting for console, fixes #168076 groff-1.18.1.4-2 ---------------- * Mon Jan 22 2007 Marcela Maslanova - 1.18.1.4-2 - changes in spec, remove patches groff-1.18.1.1-bigendian.patch, groff-xlibs.patch gsl-1.8-2.fc7 ------------- * Mon Jan 22 2007 Ivana Varekova - 1.8-2 - Resolves: 223700 fix non-failsafe install-info problem - spec file cleanup gzip-1.3.9-2.fc7 ---------------- * Mon Jan 22 2007 Ivana Varekova 1.3.9-2 - Resolves: 223702 fix non-failsafe install-info problem lvm2-2.02.19-2.fc7 ------------------ * Mon Jan 22 2007 Milan Broz - 2.02.19-2 - Remove BuildRequires libtermcap-devel Resolves: #223766 mtools-3.9.10-3.fc7 ------------------- * Mon Jan 22 2007 Adam Tkac 3.9.10-3 - Resolves: #223712 - applied Ville Skytt?'s (ville.skytta "antispam" iki.fi) patch (install-info scriptlet failures) ncurses-5.6-2.20070120.fc7 -------------------------- * Sun Jan 21 2007 Miroslav Lichvar 5.6-2.20070120 - update to patch 20070120 - don't depend on bash, drop resetall script - include rxvt-unicode description opal-2.2.4-1.fc7 ---------------- * Mon Jan 22 2007 Daniel Veillard - 2.2.4-1 - upstream release of 2.2.4 pam-0.99.7.0-2.fc7 ------------------ * Mon Jan 22 2007 Tomas Mraz 0.99.7.0-2 - add back min salt length requirement which was erroneously removed upstream * Fri Jan 19 2007 Tomas Mraz 0.99.7.0-1 - upgrade to new upstream version - drop pam_stack module as it is obsolete - some changes to silence rpmlint * Tue Jan 16 2007 Tomas Mraz 0.99.6.2-8 - properly include /var/log/faillog and tallylog as ghosts and create them in post script (#209646) - update gmo files as we patch some po files (#218271) - add use_current_range option to pam_selinux (#220487) - improve the role selection in pam_selinux - remove shortcut on Password: in ja locale (#218271) - revert to old euid and not ruid when setting euid in pam_keyinit (#219486) - rename selinux-namespace patch to namespace-level pcre-7.0-2 ---------- * Mon Jan 22 2007 Than Ngo - 7.0-1 - 7.0 psgml-1.2.5-5.fc7 ----------------- * Mon Jan 22 2007 Adam Tkac 1.2.5-5.fc7 - added dist macro - fixed install-info scriptlet failures (#223715), patch from Ville Skytt? (ville.skytta "antispam" iki.fi) pwlib-1.10.3-1.fc7 ------------------ * Mon Jan 22 2007 Daniel Veillard - 1.10.3-1 - Update to 1.10.3 quagga-0:0.98.6-3.fc7 --------------------- * Mon Jan 22 2007 Martin Bacovsky - 0.98.6-3.fc7 - Resolves: #172548 - quagga.spec defines with_vtysh 1 but vtysh is not enabled in the build rsh-0.17-39.fc7 --------------- * Mon Jan 22 2007 Adam Tkac 0.17-39.fc7 - rebased on ncurses instead of libtermcap s390utils-2:1.5.4-4.fc7 ----------------------- * Mon Jan 22 2007 Phil Knirsch 2:1.5.4-4.fc7 - Fixed problem with invisible zfcp devices after boot (#223569) tar-2:1.15.1-25.fc7 ------------------- * Wed Jan 03 2007 Peter Vrabec 2:1.15.1-25 - fix non-failsafe install-info use in scriptlets (#223718) tetex-3.0-35.fc7 ---------------- * Mon Jan 22 2007 Jindrich Movy 3.0-35 - make preun scripts failsafe for subpackages when docs are excluded (#223719) time-1.7-28.fc7 --------------- * Mon Jan 22 2007 Florian La Roche - add dist tag - fix rhbz#223720 vixie-cron-4:4.1-72.fc7 ----------------------- * Mon Jan 22 2007 Marcela Maslanova - 4:4.1-72 - change in manual - rhbz#223532 - rhbz#223662, rhbz#222464 which-2.16-8 ------------ * Mon Jan 22 2007 Than Ngo - 2.16-8 - install-info scriptlet failures Broken deps for ppc64 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for i386 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for x86_64 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for ppc ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for ia64 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for s390 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 Broken deps for s390x ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl From lwn-ft at lwn.net Mon Jan 22 21:09:44 2007 From: lwn-ft at lwn.net (Jonathan Corbet) Date: Mon, 22 Jan 2007 14:09:44 -0700 Subject: Fighting the i386 plague Message-ID: <975.1169500184@lwn.net> I'm one of those strange people who thinks that, by virtue of having an x86_64 system, I shouldn't need to drag a lot of i386 packages around. But keeping them off the system is a real pain. I ran "yum update" on my rawhide system just now, and got the following output: gutenprint x86_64 5.0.0-4.fc7 extras-development 2.7 M replacing gimp-print-utils.x86_64 4.2.7-24.fc7 gutenprint i386 5.0.0-4.fc7 extras-development 2.7 M replacing gimp-print-utils.x86_64 4.2.7-24.fc7 Can anybody tell me why it wants to pull in the i386 version of gutenprint to replace the x86_64 version of gimp-print-utils? Is there any way to convince it not to do things like that? Thanks, jon From jkeating at redhat.com Mon Jan 22 21:20:48 2007 From: jkeating at redhat.com (Jesse Keating) Date: Mon, 22 Jan 2007 16:20:48 -0500 Subject: Fighting the i386 plague In-Reply-To: <975.1169500184@lwn.net> References: <975.1169500184@lwn.net> Message-ID: <200701221620.48965.jkeating@redhat.com> On Monday 22 January 2007 16:09, Jonathan Corbet wrote: > Can anybody tell me why it wants to pull in the i386 version of > gutenprint to replace the x86_64 version of gimp-print-utils? ?Is there > any way to convince it not to do things like that? By default, if you ask yum to install and .i386 + .x86_64 are available, you'll get them both. (same for other arches, like ppc/ppc64) This is so that multilib Just Works and you don't have to think about it. Those that DO think about it and concienciously decide to NOT use that feature of their processor can add "exclude=*.i?86" to /etc/yum.conf, as well as yum remove \*.i?86. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From david at lovesunix.net Mon Jan 22 21:29:13 2007 From: david at lovesunix.net (David Nielsen) Date: Mon, 22 Jan 2007 22:29:13 +0100 Subject: Fighting the i386 plague In-Reply-To: <200701221620.48965.jkeating@redhat.com> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> Message-ID: <1169501353.32400.6.camel@dawkins> man, 22 01 2007 kl. 16:20 -0500, skrev Jesse Keating: > On Monday 22 January 2007 16:09, Jonathan Corbet wrote: > > Can anybody tell me why it wants to pull in the i386 version of > > gutenprint to replace the x86_64 version of gimp-print-utils? Is there > > any way to convince it not to do things like that? > > By default, if you ask yum to install and .i386 + > .x86_64 are available, you'll get them both. (same for other > arches, like ppc/ppc64) This is so that multilib Just Works and you don't > have to think about it. Those that DO think about it and concienciously > decide to NOT use that feature of their processor can add "exclude=*.i?86" > to /etc/yum.conf, as well as yum remove \*.i?86. I seem to remember mentions that this specific solution to the multilib disaster would cause problems by removing needed packages. Any truth to that? - David -- "Ridicule is the only weapon that can be used against unintelligible propositions. Ideas must be distinct before reason can act upon them.? -Thomas Jefferson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: Dette er en digitalt underskrevet brevdel URL: From gmaxwell at gmail.com Mon Jan 22 21:33:35 2007 From: gmaxwell at gmail.com (Gregory Maxwell) Date: Mon, 22 Jan 2007 16:33:35 -0500 Subject: Fighting the i386 plague In-Reply-To: <1169501353.32400.6.camel@dawkins> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> Message-ID: On 1/22/07, David Nielsen wrote: > I seem to remember mentions that this specific solution to the multilib > disaster would cause problems by removing needed packages. Any truth to > that? Not needed packages.. files.. Right now foo.x86_64.rpm and foo.i386.rpm can provide /usr/share/foo/important_arch_neutral_file_such_as_a_manpage If you remove foo.i386.rpm the shared file will get nuked. RPM can recognize such overlaps and do the right thing, but some code which greatly speeds up dependency computation breaks that. From alan at clueserver.org Mon Jan 22 21:41:35 2007 From: alan at clueserver.org (alan) Date: Mon, 22 Jan 2007 13:41:35 -0800 (PST) Subject: Fighting the i386 plague In-Reply-To: <1169501353.32400.6.camel@dawkins> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> Message-ID: On Mon, 22 Jan 2007, David Nielsen wrote: > man, 22 01 2007 kl. 16:20 -0500, skrev Jesse Keating: >> On Monday 22 January 2007 16:09, Jonathan Corbet wrote: >>> Can anybody tell me why it wants to pull in the i386 version of >>> gutenprint to replace the x86_64 version of gimp-print-utils? Is there >>> any way to convince it not to do things like that? >> >> By default, if you ask yum to install and .i386 + >> .x86_64 are available, you'll get them both. (same for other >> arches, like ppc/ppc64) This is so that multilib Just Works and you don't >> have to think about it. Those that DO think about it and concienciously >> decide to NOT use that feature of their processor can add "exclude=*.i?86" >> to /etc/yum.conf, as well as yum remove \*.i?86. > > I seem to remember mentions that this specific solution to the multilib > disaster would cause problems by removing needed packages. Any truth to > that? For anyone using anything linked as 32bit, yes. A while back I tried removing the 32bit stuff and was left with a non-working system. I am not certain what is linked against the 32bit libraries in the default distribution. (I can check my laptop, but that is at home.) OpenOffice used to be 32bit only, but I believe they fixed that. Things like Acroread and similar binary only will need the libraries, as well. (People tend to use more than just the things installed with the distro.) At some point, I will have to do a check of what uses the 32bit libraries on a 64-bit install. Hopefully not much, but you never know... -- "Invoking the supernatural can explain anything, and hence explains nothing." - University of Utah bioengineering professor Gregory Clark From jim at jbsys.com Mon Jan 22 22:01:04 2007 From: jim at jbsys.com (Jim Bevier) Date: Mon, 22 Jan 2007 15:01:04 -0700 Subject: sata_promise.c patch from libata-dev.git#upstream Message-ID: <003101c73e70$cfd34fe0$0a01a8c0@jbsys> Dave, Here is the pata drive on sata_promise controller patch. It is the one that will someday find its way into 2.6.21. Until then, please include this patch in the kernel build to provide pata drive support. I would be most thankful. Jim -------------- next part -------------- A non-text attachment was scrubbed... Name: linux-2.6.19-sata-promise-pata-ports.patch Type: application/octet-stream Size: 3237 bytes Desc: not available URL: From michal at harddata.com Mon Jan 22 22:13:13 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 22 Jan 2007 15:13:13 -0700 Subject: Fighting the i386 plague In-Reply-To: <200701221620.48965.jkeating@redhat.com> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> Message-ID: <20070122221313.GB3816@mail.harddata.com> On Mon, Jan 22, 2007 at 04:20:48PM -0500, Jesse Keating wrote: > On Monday 22 January 2007 16:09, Jonathan Corbet wrote: > > Can anybody tell me why it wants to pull in the i386 version of > > gutenprint to replace the x86_64 version of gimp-print-utils? ?Is there > > any way to convince it not to do things like that? > > By default, if you ask yum to install and .i386 + > .x86_64 are available, you'll get them both. You seem to be missing the point. Jonathan did not ask to "install gutentprint". Look at this output: gutenprint i386 5.0.0-4.fc7 extras-development 2.7 M replacing gimp-print-utils.x86_64 4.2.7-24.fc7 and the same gimp-print-utils.x86_64 is "replaced" but x86_64 version of gutenprint too. In the past I was complaining about that behaviour and also did not get very far. See https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=199600 I was told that this is a packaging bug and yum does what it is supposed to do. I am still not convinced. It is quite clear that while doing replacements yum has a full information about architectures involved. If you indeed had installed gimp-print-utils.i386 too then gutenprint.i386 would show up in a transaction anyway. > Those that DO think about it and concienciously > decide to NOT use that feature of their processor can add "exclude=*.i?86" > to /etc/yum.conf, as well as yum remove \*.i?86. This is fine and dandy if you indeed do not have any i?86 packages on the system; but if you do have some then you cannot use such exclude. If you happen to have gimp-print-utils.x86_64 _only_ then you will still aquire unwanted gutenprint.i386, and whatever will get pulled in by dependencies, unless you are very careful and you will do explicitely yum install gutenprint.x86_64 before running the remainder of an update. The command above will replace gimp-print-utils.x86_64 and extra i?86 packages will be not added to your system. That is likely too much to ask from an average user. Michal From jkeating at redhat.com Mon Jan 22 22:23:04 2007 From: jkeating at redhat.com (Jesse Keating) Date: Mon, 22 Jan 2007 17:23:04 -0500 Subject: Fighting the i386 plague In-Reply-To: <20070122221313.GB3816@mail.harddata.com> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <20070122221313.GB3816@mail.harddata.com> Message-ID: <200701221723.09166.jkeating@redhat.com> On Monday 22 January 2007 17:13, Michal Jaegermann wrote: > You seem to be missing the point. ?Jonathan did not ask to > "install gutentprint". ?Look at this output: > > ?gutenprint ? ? ? ? ? ? ?i386 ? ? ? 5.0.0-4.fc7 ? ? ?extras-development > ?2.7 M replacing ?gimp-print-utils.x86_64 4.2.7-24.fc7 > > and the same gimp-print-utils.x86_64 is "replaced" but x86_64 version > of gutenprint too. > > In the past I was complaining about that behaviour and also did not > get very far. ?See > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=199600 > I was told that this is a packaging bug and yum does what it is > supposed to do. ?I am still not convinced. ?It is quite clear > that while doing replacements yum has a full information about > architectures involved. ?If you indeed had installed > gimp-print-utils.i386 too then gutenprint.i386 would show up > in a transaction anyway. You're referencing a different issue all together. In the gutenprint case, the yum output may have been muddied a bit, it is entirely possible that the user had both x86_64 and i386 versions of gimp-print. The replacement got attributed to the .x86_64 both times, which may not have been correct. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From michal at harddata.com Mon Jan 22 22:22:36 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 22 Jan 2007 15:22:36 -0700 Subject: Fighting the i386 plague In-Reply-To: References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> Message-ID: <20070122222236.GC3816@mail.harddata.com> On Mon, Jan 22, 2007 at 01:41:35PM -0800, alan wrote: > > A while back I tried removing the 32bit stuff and was left with a > non-working system. Actually removing 32bit stuff is quite easy. The following yum remove '*.i?86' will do just fine. Just remember to run afterwards 'package-cleanup --problems' from 'yum-utils' package and reinstall those packages where you will get complaints. > Things like Acroread and similar binary only will need the > libraries, as well. If you are using something which requires i386 libraries then removing those is clearly not an option. Not a big surprise here but this is very far from "a non-working system" if you break some non-distro stuff here and there. Michal From michal at harddata.com Mon Jan 22 22:28:53 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 22 Jan 2007 15:28:53 -0700 Subject: Fighting the i386 plague In-Reply-To: <200701221723.09166.jkeating@redhat.com> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <20070122221313.GB3816@mail.harddata.com> <200701221723.09166.jkeating@redhat.com> Message-ID: <20070122222853.GD3816@mail.harddata.com> On Mon, Jan 22, 2007 at 05:23:04PM -0500, Jesse Keating wrote: > > In the gutenprint case, the yum output may have been muddied a bit, it is > entirely possible that the user had both x86_64 and i386 versions of > gimp-print. It is possible but a quoted output does not support what you saying. > The replacement got attributed to the .x86_64 both times, which > may not have been correct. That output is correct in that sense that yum indeed does that. I have a "clean x86_64" test system as well and I run into exactly the same issue with gimp-print and gutentprint. That is why I know how to get around that problem without adding a global exclude. If you will let yum run as it pleases you will get many megabytes of libraries pulled in by dependencies. This includes glibc.i686 among other things. None of that stuff really asked for. Michal From lwn-ft at lwn.net Mon Jan 22 22:44:32 2007 From: lwn-ft at lwn.net (Jonathan Corbet) Date: Mon, 22 Jan 2007 15:44:32 -0700 Subject: Fighting the i386 plague In-Reply-To: Your message of "Mon, 22 Jan 2007 17:23:04 EST." <200701221723.09166.jkeating@redhat.com> Message-ID: <3825.1169505872@lwn.net> Jesse Keating wrote: > In the gutenprint case, the yum output may have been muddied a bit, it is > entirely possible that the user had both x86_64 and i386 versions of > gimp-print. The replacement got attributed to the .x86_64 both times, which > may not have been correct. No, I've been trying to get rid of i386 stuff, remember? I checked that before posting my first message. Only the x86_64 version was installed. I think the situation is a little more complicated, anyway. If I say: yum install frobnitz It does *not* go off and install both versions - I just get the x86_64 version, which is what I would want. The i386 packages seem to mostly sneak in through upgrades, as was shown in my example. Thanks, jon From jkeating at redhat.com Mon Jan 22 23:11:55 2007 From: jkeating at redhat.com (Jesse Keating) Date: Mon, 22 Jan 2007 18:11:55 -0500 Subject: Fighting the i386 plague In-Reply-To: <3825.1169505872@lwn.net> References: <3825.1169505872@lwn.net> Message-ID: <200701221811.56153.jkeating@redhat.com> On Monday 22 January 2007 17:44, Jonathan Corbet wrote: > No, I've been trying to get rid of i386 stuff, remember? ?I checked that > before posting my first message. ?Only the x86_64 version was installed. So that may be one distinct bug. > I think the situation is a little more complicated, anyway. ?If I say: > > ????????yum install frobnitz I call bs. $ rpm -q tcl package tcl is not installed [jkeating at reducto comps]$ sudo yum install tcl Loading "installonlyn" plugin Setting up Install Process Setting up repositories development 100% |=========================| 1.1 kB 00:00 extras-development 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files Parsing package install arguments Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Downloading header for tcl to pack into transaction set. tcl-8.4.13-3.fc6.x86_64.r 100% |=========================| 26 kB 00:00 ---> Package tcl.x86_64 0:8.4.13-3.fc6 set to be updated ---> Package tcl.i386 0:8.4.13-3.fc6 set to be updated --> Running transaction check Dependencies Resolved ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: tcl x86_64 8.4.13-3.fc6 development 960 k tcl i386 8.4.13-3.fc6 development 961 k Transaction Summary ============================================================================= Install 2 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 1.9 M Is this ok [y/N]: n Exiting on user Command Complete! > > It does *not* go off and install both versions - I just get the x86_64 > version, which is what I would want. This is only true if you have an exclude line that tells yum to not look at *.i?86 packages. _OR_ the 'frobitz' you're asking to install isn't available for multilib. Not every package is. > The i386 packages seem to mostly > sneak in through upgrades, as was shown in my example. Again, we may be talking about a distinct bug here. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From wdhammond at earthlink.net Mon Jan 22 23:18:39 2007 From: wdhammond at earthlink.net (wayne) Date: Mon, 22 Jan 2007 17:18:39 -0600 Subject: SDL_gfx - Re: fedora-test-list Digest, Vol 35, Issue 27 In-Reply-To: <20070122170013.676A97369D@hormel.redhat.com> References: <20070122170013.676A97369D@hormel.redhat.com> Message-ID: <45B5464F.6070807@earthlink.net> fedora-test-list-request at redhat.com wrote: > Send fedora-test-list mailing list submissions to > fedora-test-list at redhat.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://www.redhat.com/mailman/listinfo/fedora-test-list > or, via email, send a message with subject or body 'help' to > fedora-test-list-request at redhat.com > > You can reach the person managing the list at > fedora-test-list-owner at redhat.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of fedora-test-list digest..." > > > Today's Topics: > > 1. SDL_gfx - Re: fedora-test-list Digest, Vol 35, Issue 27 > (Michael Schwendt) > 2. Re: Inclusion of Grub 2 in FC7 ? (Bruno Wolff III) > 3. rawhide report: 20070122 changes (buildsys at redhat.com) > 4. FC6, kernel 2.6.19 and software suspend (Peter Robinson) > 5. Re: rawhide report: 20070120 changes (Tomas Mraz) > 6. kickstart testing needed (Chris Lumens) > 7. Bluetooth Logitech mouse (Ernest L. Williams Jr.) > 8. Re: Bluetooth Logitech mouse (Jeffrey C. Ollie) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 22 Jan 2007 08:00:37 +0100 > From: Michael Schwendt > Subject: SDL_gfx - Re: fedora-test-list Digest, Vol 35, Issue 27 > To: For testers of Fedora Core development releases > > Message-ID: > <20070122080037.e7044a3c.mschwendt.tmp0701.nospam at arcor.de> > Content-Type: text/plain; charset=US-ASCII > > On Sun, 21 Jan 2007 22:04:27 -0600, wayne wrote: > > >> If libSDL_gfx.so.13 was on my computer and was not recognized as such, >> what would cause that? >> > > An upgrade to an incompatible SDL_gfx package provided in a non-Fedora > repository. Or a hopelessly broken RPM database. > > Yum *does* see the installed libSDL_gfx.so.13 just like > > rpm -qf /usr/lib/libSDL_gfx* > > does, e.g. > > yum list SDL_gfx > > *But* if there is a package upgrade to the libSDL_gfx.so.0.0.15 you've > talked of, the old files are not available anymore and are not in the > transaction check either. They would be gone with the upgrade, which > fails because other files still need the older SDL_gfx package. > > So, look into what SDL_gfx package version is installed and what package > would be installed by "yum upgrade". Find out where it comes from. > These are the repos installed on my computer. /etc/yum.repos.d/dries.repo /etc/yum.repos.d/fedora-core.repo /etc/yum.repos.d/fedora-development.repo /etc/yum.repos.d/fedora-extras-development.repo /etc/yum.repos.d/fedora-extras.repo /etc/yum.repos.d/fedora-legacy.repo /etc/yum.repos.d/fedora-updates-testing.repo /etc/yum.repos.d/fedora-updates.repo /etc/yum.repos.d/freshrpms.repo /etc/yum.repos.d/livna.repo > >> That was the symbolic link available but yum >> didn't recognize the it as such as that package did not meet the >> dependency requirements and the whole process failed. >> > > With all due respect, this is nonsense. "rpm -ql SDL_gfx" lists the files > *any* symlinks included in the package, and the symlink is included, too. > When this mess started, libSDL_gfx.so.13 was installed, complete with a symlink to it, but was not recognized by yum for some reason. Perhaps the db files were already corrupt? > >> Which repos could cause that? I believe the only one I have that is not >> Fedora is for NVidia drivers, and I only enable it when the kernel is >> updated so that I can use my NVidia graphics card. >> > > Instead of guessing that you could simply verify which repositories you > have enabled. You've talked about a version of SDL_gfx that is not > provided in Fedora Extras 6 and "Development" packages yet. Where does > it come from? > When yum would not adcance with upgrades because of the original error I posted, I downloaded version 15 from the website listed and installed it. Yum would still not upgrade. > >> I kept getting error messages during yum -y update attempts. After "yum >> remove frozen-bubble" and "yum remove perl-SDL" attempting to run "yum >> -y update" generated a lockup of the terminal session with many lines of >> ascii characters. Also messages about a corrupt database. "rpm --vv >> --rebuilddb" did not work. After "cd /var/lib/rpm" then "rm -f *.00*" I >> was able to successfully use "rpm -vv --rebuilddb" and then run "yum -y >> update". >> > > Well, can you accept that all this is abnormal behaviour? > > You cover multiple problems in one mail. Problems with an incompatible > SDL_gfx package from an unknown location and corruption with RPM. That > doesn't make it easy if the investigation work is not done by you. > Agreed, I often have to troubleshoot DCS programming not done by me and am well aware of the aggravation. The original error message may have mislead me down the wrong path! > >> Also, after I received this response from you, I received the below from >> the website from the above link: >> > > That is irrelevant. You search in wrong places. SDL_gfx in Fedora > Extras is still at v2.0.13. Only if you mess with upstream package > releases or non-Fedora packages, you run into the problems with the > SONAME change. > Could you point me to a documentation source for troubleshooting? > >> Until then please try the following: >> - you can try to locate the new SDL_gfx rpm, download it manually and >> force an installation using "rpm -Uvh --force --nodeps *.rpm" >> > > And this is a big fat DO NOT. Whoever has recommended those rpm > options has given you very bad advice. It's not just that --force > is permitted to overwrite arbitrary files from other packages, --nodeps > ignores package dependencies altogether and only increases problems > with further installs. > The person that made the recommendation was apparently from the site that provides the driver. How do I find out who I should listen to? Thanks again for your help. > > > ------------------------------ > > Message: 2 > Date: Mon, 22 Jan 2007 01:31:05 -0600 > From: Bruno Wolff III > Subject: Re: Inclusion of Grub 2 in FC7 ? > To: "monty19@ hotmail.com" > Cc: fedora-test-list at redhat.com > Message-ID: <20070122073105.GA2318 at wolff.to> > Content-Type: text/plain; charset=us-ascii > > On Sun, Jan 21, 2007 at 05:44:43 +0000, > "monty19@ hotmail.com" wrote: > >> I would like to see it included, at least as an option. I gather that it >> is too late for FC7, but it would be nice to be able to boot to a root >> partition on a Software RAID when F8 comes out... >> > > I tried cvs a week or so ago and the software raid part didn't seem to work. > I had the raid module loaded but listing devices didn't show any of my > raid arrays. I asked about in on the grub-devel list and didn't get a response. > > Also of note for getting into FC7 is that the last change to cvs was December > 13th, so there seems to be some kind of lull in development right now. > > > > ------------------------------ > > Message: 3 > Date: Mon, 22 Jan 2007 06:24:27 -0500 > From: buildsys at redhat.com > Subject: rawhide report: 20070122 changes > To: fedora-devel-list at redhat.com, fedora-test-list at redhat.com > Message-ID: <200701221124.l0MBOREI020990 at hs20-bc2-6.build.redhat.com> > > > > > Updated Packages: > > bison-2.3-3.fc7 > --------------- > * Sun Jan 21 2007 Roland McGrath - 2.3-3 > - Canonicalize post/preun use of install-info. > - Resolves: 223679 > > cpio-2.6-23.fc7 > --------------- > * Mon Jan 22 2007 Peter Vrabec 2.6-23 > - fix non-failsafe install-info use in scriptlets (#223682) > > emacspeak-25-1.fc7 > ------------------ > * Mon Jan 22 2007 Jens Petersen - 25-1 > - update to version 25 > - update emacspeak-tcl-pkgreq-tclx.patch > - protect install-info in %post and %preun (Ville Skytt??, #223685) > > gettext-0.16.1-3.fc7 > -------------------- > * Mon Jan 22 2007 Jens Petersen - 0.16.1-3 > - protect install-info in %post and %preun (Ville Skytt??, #223689) > > gnome-desktop-2.17.90-1.fc7 > --------------------------- > * Sun Jan 21 2007 Matthias Clasen - 2.17.90-1 > - Update to 2.17.90 > - Drop some long-obsolete images > - Clean up BuildRequires > > gnome-panel-2.17.90-1.fc7 > ------------------------- > * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 > - Update to 2.17.90 > - Clean up BuildRequires > - Allow user switching from the logout dialog > > gnome-session-2.17.90-1.fc7 > --------------------------- > * Sun Jan 21 2007 Matthias Clasen - 2.17.90-1 > - Update to 2.17.90 > - Clean up BuildRequires > > ncurses-5.6-2.20070120.fc7 > -------------------------- > * Sun Jan 21 2007 Miroslav Lichvar 5.6-2.20070120 > - update to patch 20070120 > - don't depend on bash, drop resetall script > - include rxvt-unicode description > > tar-2:1.15.1-25.fc7 > ------------------- > * Wed Jan 03 2007 Peter Vrabec 2:1.15.1-25 > - fix non-failsafe install-info use in scriptlets (#223718) > > Broken deps for i386 > ---------------------------------------------------------- > emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl > > > > Broken deps for ppc64 > ---------------------------------------------------------- > emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl > > > > Broken deps for x86_64 > ---------------------------------------------------------- > emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl > > > > Broken deps for ia64 > ---------------------------------------------------------- > emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl > > > > Broken deps for s390 > ---------------------------------------------------------- > emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl > systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 > systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 > > > > Broken deps for ppc > ---------------------------------------------------------- > emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl > > > > Broken deps for s390x > ---------------------------------------------------------- > emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl > > > > > > ------------------------------ > > Message: 4 > Date: Mon, 22 Jan 2007 12:26:53 +0000 > From: "Peter Robinson" > Subject: FC6, kernel 2.6.19 and software suspend > To: "For testers of Fedora Core development releases" > > Message-ID: > <5256d0b0701220426o54aa7cd7hdee11ce081a1e34a at mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi All, > > A while ago (in the test-2 or test-3 stage of FC6) I got a new laptop. > A Dell Latitude D620. My old laptop was a Latitude D600 running FC5. > > I installed the testing release of FC6 because the D620 is a Core Duo > chip and chipset and FC6 looked to have better support for that > hardware. The one thing that never seemed to work was the resume from > suspend, it worked perfectly on FC5 on the D600. I seem to remember I > mentioned it on the list in one of the discussions about it. > > Last night I finally got around to playing with it some more. It seems > the reason it doesn't resume (lots of errors spewed to the console > about ata.1) is due to the fact we have a corporate policy of having > HDD passwords on all laptops. If I temporarily remove the HDD password > it resumes perfectly on 2.6.18 but it doesn't on 2.6.19 (hence the > mention of 2.6.19 in the subject). > > So is this a known problem with HDD passwords using a SATA chip > (libata presumably) or should I bugzilla it? I seem to remember an age > ago there was this issue somewhere with another ide laptop. > > Peter > > > > ------------------------------ > > Message: 5 > Date: Mon, 22 Jan 2007 14:10:48 +0100 > From: Tomas Mraz > Subject: Re: rawhide report: 20070120 changes > To: Bernardo Innocenti > Cc: fedora-devel-list at redhat.com, fedora-test-list at redhat.com, > buildsys at redhat.com > Message-ID: <1169471448.3244.3.camel at perun.kabelta.loc> > Content-Type: text/plain > > On Mon, 2007-01-22 at 07:21 +0100, Bernardo Innocenti wrote: > >> On Saturday 20 January 2007 12:27, buildsys at redhat.com wrote: >> >> >>> pam-0.99.7.0-1.fc7 >>> ------------------ >>> * Fri Jan 19 2007 Tomas Mraz 0.99.7.0-1 >>> - upgrade to new upstream version >>> - drop pam_stack module as it is obsolete >>> - some changes to silence rpmlint >>> >> Is it just me or after this update anybody and his dog can >> login without typing a valid password in any account? >> >> See: >> >> bernie at bender:~$ su - openwrt >> Password: >> openwrt at bender:~$ >> openwrt at bender:~$ logout >> openwrt at bender:~$ logout >> bender:/etc/pam.d# grep openwrt /etc/passwd /etc/shadow >> /etc/passwd:openwrt:x:501:501:openwrt compiler:/usr/local/src/openwrt:/bin/bash >> /etc/shadow:openwrt:!!:13529:::::: >> >> I've installed this update yesterday in the evening and today >> there were already rootkits and irc bots everywhere :) >> >> > Well it is not just you. And I am ashamed I didn't catch this problem > when reviewing changes in new upstream version. :( It won't allow anyone > to any account but only accounts with only two characters in passwd > field - like !! and similar. It is very serious anyway. > Should be fixed in pam-0.99.7.0-2.fc7. > > -- Wayne www.glenmeadows.us "I cannot imagine a God who rewards and punishes the objects of his creation, whose purposes are modeled after our own -- a God, in short, who is but a reflection of human frailty. Neither can I believe that the individual survives the death of his body, although feeble souls harbor such thoughts through fear or ridiculous egotism." [Einstein] -------------- next part -------------- An HTML attachment was scrubbed... URL: From mrsam at courier-mta.com Mon Jan 22 23:25:09 2007 From: mrsam at courier-mta.com (Sam Varshavchik) Date: Mon, 22 Jan 2007 18:25:09 -0500 Subject: Fighting the i386 plague References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> Message-ID: Gregory Maxwell writes: > Not needed packages.. files.. > > Right now foo.x86_64.rpm and foo.i386.rpm can provide > /usr/share/foo/important_arch_neutral_file_such_as_a_manpage > > If you remove foo.i386.rpm the shared file will get nuked. > > RPM can recognize such overlaps and do the right thing, but some code > which greatly speeds up dependency computation breaks that. No, this is the other way around. rpm is broken. If both package X and package Y install the same file, removing package X _SHOULD NOT_ remove the shared file. And that's the way it works for everything except, inexplicably, %doc files that go into /usr/share/doc, and locale files in /usr/share/locale. This is a known bug that's apparently been in rpm for years. It's supposedly fixed in the "upstream" release of rpm, and who knows when that's going to go into Fedora. rpm development has stagnated. Rather than bite the bullet and fix some of the overgrown bloat and legacy cruft in rpm, the current solution seems to be to just affix one bandaid after another, i.e. the kludge with installing the kernel rpms correctly, the external kmdl rpms, etc? I have no idea why rpm runs different logic for %doc files and locale files. That's a brain-scratcher. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From michal at harddata.com Mon Jan 22 23:36:29 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 22 Jan 2007 16:36:29 -0700 Subject: Fighting the i386 plague In-Reply-To: <200701221811.56153.jkeating@redhat.com> References: <3825.1169505872@lwn.net> <200701221811.56153.jkeating@redhat.com> Message-ID: <20070122233629.GA9811@mail.harddata.com> On Mon, Jan 22, 2007 at 06:11:55PM -0500, Jesse Keating wrote: > On Monday 22 January 2007 17:44, Jonathan Corbet wrote: > > No, I've been trying to get rid of i386 stuff, remember? ?I checked that > > before posting my first message. ?Only the x86_64 version was installed. > > So that may be one distinct bug. Yes, and you will have a hard time to convince me that this bug is any different than https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=199600 It is conceivable that more careful packaging would help but in real life I hardly expect that packagers will be very arch specific in "obsoletes" while yum clearly has all required info. Michal From kevin.kofler at chello.at Tue Jan 23 00:33:25 2007 From: kevin.kofler at chello.at (Kevin Kofler) Date: Tue, 23 Jan 2007 00:33:25 +0000 (UTC) Subject: Fighting the i386 plague References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> <20070122222236.GC3816@mail.harddata.com> Message-ID: Michal Jaegermann harddata.com> writes: > Actually removing 32bit stuff is quite easy. The following > > yum remove '*.i?86' > > will do just fine. ... and leave you with lots of RPMs with missing files unless you're either still on FC5 or apply the patch to the RPM specfile I posted at: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=209306 and rebuild an RPM of RPM with that patch. Kevin Kofler From michal at harddata.com Tue Jan 23 00:51:43 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 22 Jan 2007 17:51:43 -0700 Subject: Fighting the i386 plague In-Reply-To: References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> <20070122222236.GC3816@mail.harddata.com> Message-ID: <20070123005143.GA11639@mail.harddata.com> On Tue, Jan 23, 2007 at 12:33:25AM +0000, Kevin Kofler wrote: > Michal Jaegermann harddata.com> writes: > > Actually removing 32bit stuff is quite easy. The following > > > > yum remove '*.i?86' > > > > will do just fine. > > ... and leave you with lots of RPMs with missing files That is why you need 'package-cleanup' run as well. You conveniently cut what I wrote. This is still easy if tedious in places. I agree that a non-broken rpm would be a good thing to have. The above is really a one time deal, but cleanups after yum screwed up, which it does from time to time, would be much easier with a correct rpm. Michal From jwilliam at xmission.com Tue Jan 23 03:43:56 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Mon, 22 Jan 2007 20:43:56 -0700 Subject: How to report install bug? Message-ID: <000601c73ea0$b5d0d4c0$020aa8c0@a18> How should I report this bug to bugzilla? I boot from usb flash drive and select NFS for install. Install runs fine and then reboot fails because I have to change the bios every time to boot from usb flash drive. Change to boot from usb flash drive and it boots fine. Look at /boot/grub/device.map and see: (hd1) /dev/sda (hd0) /dev/sdd /dev/sda is my hard drive and /dev/sdd is the flash drive. So the install wrote to my usb flash drive instead of the hard drive. This is the new soon to be fc7. Or should it be F7, I thought the core was going away. So should I use devel or fc6 and is this a bug against grub or anaconda or something else? Can't we fix bugzilla to have like f7pret1 or fc7ptest1? From justin.conover at gmail.com Tue Jan 23 03:59:27 2007 From: justin.conover at gmail.com (Justin Conover) Date: Mon, 22 Jan 2007 21:59:27 -0600 Subject: Kernel-2.6.20-rc* In-Reply-To: References: Message-ID: On 1/18/07, Justin Conover wrote: > > > > On 1/17/07, Gregory Maxwell wrote: > > > > On 1/17/07, Justin Conover wrote: > > > Dave Jones, > > > > > > Do you know when you will be building a kernel off of that? > > > > > > I'm interested in rc2 and beyond > > > > > > http://uwsg.iu.edu/hypermail/linux/kernel/0612.3/0000.html > > > > > > I was wanting to test the Novatel U720 > > > > > > Eric Smith (1): > > > usb serial: add support for Novatel S720/U720 CDMA/EV-DO modems > > > > > > http://marc2.theaimsgroup.com/?l=linux-mm-commits&m=116577893917749&q=raw > > > > > > > > Even without the updated kernel you can instruct usbserial to talk to > > the device manually: > > modprobe usbserial product=0?2110 vendor=0?1410 > > > > Let me know if you get it working. I just recieved one of these too, > > but since it doesn't appear possible to perform first time activation > > of the device without Microsoft Windows, I'm considering sending it > > back. > > > > -- > > fedora-test-list mailing list > > fedora-test-list at redhat.com > > To unsubscribe: > > https://www.redhat.com/mailman/listinfo/fedora-test-list > > > > modprobe usbserial product=0?2110 vendor=0?1410 > Jan 18 04:31:40 echelon kernel: usbcore: registered new interface driver > usbserial > Jan 18 04:31:40 echelon kernel: drivers/usb/serial/usb-serial.c: USB > Serial support registered for generic > Jan 18 04:31:40 echelon kernel: usbcore: registered new interface driver > usbserial_generic > Jan 18 04:31:40 echelon kernel: drivers/usb/serial/usb-serial.c: USB > Serial Driver core > > I was able to register mine with windows, because well, I work for Sprint > and they give me a windows laptop, I just use it for work and everything > else I use is some sort of *nix ;) [root at echelon ~]# modprobe ppp_async [root at echelon ~]# modprobe usbserial product=0?2110 vendor=0?1410 [root at echelon peers]# pppd call sprint Starting Sprint Connecting... Serial connection established. Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 local IP address 7x.13.8x.xx remote IP address 68.28.89.69 primary DNS address 68.28.90.11 secondary DNS address 68.28.82.11 -------------- next part -------------- An HTML attachment was scrubbed... URL: From michal at harddata.com Tue Jan 23 04:26:59 2007 From: michal at harddata.com (Michal Jaegermann) Date: Mon, 22 Jan 2007 21:26:59 -0700 Subject: How to report install bug? In-Reply-To: <000601c73ea0$b5d0d4c0$020aa8c0@a18> References: <000601c73ea0$b5d0d4c0$020aa8c0@a18> Message-ID: <20070123042659.GA16944@mail.harddata.com> On Mon, Jan 22, 2007 at 08:43:56PM -0700, Jerry Williams wrote: > How should I report this bug to bugzilla? Sounds like you would have to complain about your BIOS. > I boot from usb flash drive and select NFS for install. > Install runs fine and then reboot fails because I have to change the bios > every time to boot from usb flash drive. Grub allows things like grub> map (hd0) (hd1) grub> map (hd1) (hd0) Maybe you can use that when booting from flash? After that you can write a boot sector and it should point to a device which will be correct after you removed your flash. At least it seems to me that this will be the case. See 'info grub' for more info. Grub numbers devices in an order they are presented by BIOS. Michal From jwilliam at xmission.com Tue Jan 23 05:10:53 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Mon, 22 Jan 2007 22:10:53 -0700 Subject: How to report install bug? In-Reply-To: <20070123042659.GA16944@mail.harddata.com> References: <000601c73ea0$b5d0d4c0$020aa8c0@a18> <20070123042659.GA16944@mail.harddata.com> Message-ID: <000d01c73eac$db59f030$020aa8c0@a18> I did this a few more times and I noticed that is says that it is going to write to /dev/sdd. I also flipped the write protect on my SD card and it whines a lot about it being read only. I don't think the BIOS needs to be fixed. I think the install needs to be fixed to allow you to change the device that GRUB installs to. I would expect the first device be the one that you boot from. Something is smart enough not to try and write to the CDROM when you boot from it. My USB flash drive is only 16MB, but the install wants to partition it and boot from it. I unchecked in on the first disk screen, but it still tries to use it and complains every time I touch a partition. When I used the advanced setting and put the Hard Drive first it crashed. Can't we just list the devices on the first screen that show where GRUB is going to write to and let the user tell it what they want to boot off of? I did find out that if I disconnected the USB flash drive once I hit enter for the NFS information that things went fine and it boots fine. My concern it that I spend a bunch of time posting to different lists, but it doesn't make any difference and that nothing changes unless you file a bug report and even then I have my doubts. If you ask me FC6 when backwards on some things in the install and I would like to make it better, but I am beginning to wonder if that is possible. I was thinking that this list was for people to report issues with testing and get them fixed. So if I report a problem is it going to make a difference or are we going to blame some old piece of hardware for the problems? So can I make a difference or not? If I can let me know what I need to do. If not I will do something else where I can. Thanks for the comment on GRUB, but there are several ways to get the system back or booting from the hard drive that isn't what I am after. I want the install to work right in the first place. A lot of people don't use linux because of the huge learning curve and problems like I am talking about. Also the linux rescue doesn't work from nfs. There is some kind of reference to libncurses.so.5 that fails. > -----Original Message----- > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > bounces at redhat.com] On Behalf Of Michal Jaegermann > Sent: Monday, January 22, 2007 9:27 PM > To: For testers of Fedora Core development releases > Subject: Re: How to report install bug? > > On Mon, Jan 22, 2007 at 08:43:56PM -0700, Jerry Williams wrote: > > How should I report this bug to bugzilla? > > Sounds like you would have to complain about your BIOS. > > > I boot from usb flash drive and select NFS for install. > > Install runs fine and then reboot fails because I have to change the > bios > > every time to boot from usb flash drive. > > Grub allows things like > > grub> map (hd0) (hd1) > grub> map (hd1) (hd0) > > Maybe you can use that when booting from flash? > After that you can write a boot sector and it should point to > a device which will be correct after you removed your flash. > At least it seems to me that this will be the case. > > See 'info grub' for more info. Grub numbers devices in an order they > are presented by BIOS. > > Michal > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list From mschwendt.tmp0701.nospam at arcor.de Tue Jan 23 08:24:52 2007 From: mschwendt.tmp0701.nospam at arcor.de (Michael Schwendt) Date: Tue, 23 Jan 2007 09:24:52 +0100 Subject: SDL_gfx - Re: fedora-test-list Digest, Vol 35, Issue 27 In-Reply-To: <45B5464F.6070807@earthlink.net> References: <20070122170013.676A97369D@hormel.redhat.com> <45B5464F.6070807@earthlink.net> Message-ID: <20070123092452.a613782c.mschwendt.tmp0701.nospam@arcor.de> On Mon, 22 Jan 2007 17:18:39 -0600, wayne wrote: > > So, look into what SDL_gfx package version is installed and what package > > would be installed by "yum upgrade". Find out where it comes from. > > > These are the repos installed on my computer. > /etc/yum.repos.d/dries.repo The new incompatible SDL_gfx from Dries' repo. I see 2.0.15 in there, which is ABI-incompatible with Fedora >= 6 so far (SDL_gfx 2.0.13). > /etc/yum.repos.d/fedora-core.repo > /etc/yum.repos.d/fedora-development.repo > /etc/yum.repos.d/fedora-extras-development.repo > /etc/yum.repos.d/fedora-extras.repo > /etc/yum.repos.d/fedora-legacy.repo > /etc/yum.repos.d/fedora-updates-testing.repo > /etc/yum.repos.d/fedora-updates.repo > /etc/yum.repos.d/freshrpms.repo > /etc/yum.repos.d/livna.repo > When this mess started, libSDL_gfx.so.13 was installed, complete with a > symlink to it, but was not recognized by yum for some reason. Perhaps > the db files were already corrupt? Maybe, maybe not. As soon as one of the enabled repos provides the incompatible SDL_gfx, your old valid one is not seen anymore in the transaction check and leads to broken dependencies. > >> Which repos could cause that? I believe the only one I have that is not > >> Fedora is for NVidia drivers, and I only enable it when the kernel is > >> updated so that I can use my NVidia graphics card. > >> > > > > Instead of guessing that you could simply verify which repositories you > > have enabled. You've talked about a version of SDL_gfx that is not > > provided in Fedora Extras 6 and "Development" packages yet. Where does > > it come from? > > > When yum would not adcance with upgrades because of the original error I > posted, I downloaded version 15 from the website listed and installed > it. Yum would still not upgrade. You need the Fedora-compatible SDL_gfx from Fedora Extras, because the other packages depend on it. > >> Also, after I received this response from you, I received the below from > >> the website from the above link: > >> > > > > That is irrelevant. You search in wrong places. SDL_gfx in Fedora > > Extras is still at v2.0.13. Only if you mess with upstream package > > releases or non-Fedora packages, you run into the problems with the > > SONAME change. > > > Could you point me to a documentation source for troubleshooting? The first step would be to stay in "Fedora" space. That is examine any broken deps when using *only* Fedora packages, not 3rd party repositories. The mix of too many repos makes it a bit more difficult to interpret yum's error messages. > The person that made the recommendation was apparently from the site > that provides the driver. How do I find out who I should listen to? Prefer official fedora-* lists or message boards and hope that any poor advice is noticed and commented on by other members of the Fedora community. From buildsys at redhat.com Tue Jan 23 11:12:41 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Tue, 23 Jan 2007 06:12:41 -0500 Subject: rawhide report: 20070123 changes Message-ID: <200701231112.l0NBCfDl000911@hs20-bc2-6.build.redhat.com> Updated Packages: GConf2-2.16.0-4.fc7 ------------------- * Mon Jan 22 2007 Matthias Clasen - 2.16.0-4 - Own the /etc/gconf/schemas directory - Misc cleanups * Sun Oct 29 2006 Ray Strode - 2.16.0-3 - run autoreconf, so that configure gets updated before it generates libtool (so it doesn't just regenerate the original, broken libtool) (again bug 203813) ORBit2-2.14.5-2.fc7 ------------------- * Mon Jan 22 2007 Matthias Clasen - 2.14.5-2 - Re-add a static library that is needed by libbonobo * Mon Jan 22 2007 Matthias Clasen - 2.14.5-1 - Update to 2.14.5 anaconda-11.2.0.14-1 -------------------- * Mon Jan 22 2007 Jeremy Katz - 11.2.0.14-1 - Fix shell on tty2 with libncurses in /lib - Use echo icon theme - Add anaconda- to VCI (dcantrell, #220082) - Remove some no-longer-needed imports (clumens) - Require system-config-keyboard antlr-0:2.7.7-1jpp.1 -------------------- * Fri Jan 19 2007 Deepak Bhole 0:2.7.7-1jpp.1 - Upgrade to 2.7.7 - Resolve 172456 with patches from Vadim Nasardinov and Radu Greab at-spi-1.7.16-1.fc7 ------------------- * Mon Jan 22 2007 Matthias Clasen - 1.7.16-1 - Update to 1.7.16 atk-1.13.2-1.fc7 ---------------- * Mon Jan 22 2007 Matthias Clasen - 1.13.2-1 - Update to 1.13.2 control-center-1:2.17.90-1.fc7 ------------------------------ * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 coreutils-6.7-3.fc7 ------------------- * Mon Jan 22 2007 Tim Waugh 6.7-3 - Make scriptlet unconditionally succeed (bug #223681). diffutils-2.8.1-16.fc7 ---------------------- * Mon Jan 22 2007 Tim Waugh 2.8.1-16 - Make scriptlet unconditionally succeed (bug #223683). eclipse-changelog-1:2.3.4-1.fc7 ------------------------------- * Mon Jan 22 2007 Kyu Lee 2.3.4-1 - Bumped to new version 2.3.4-1. * Wed Jan 17 2007 Kyu Lee 2.3.3-3 - For Fedora Extras review, cleaned up this file. Red Hat BZ#222365. eel2-2.17.90-1.fc7 ------------------ * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 eog-2.17.90-1.fc7 ----------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 epiphany-2.17.90-1.fc7 ---------------------- * Tue Jan 23 2007 Matthias Clasen 2.17.90-1 - Update to 2.17.90 fetchmail-6.3.6-2.fc7 --------------------- * Mon Jan 22 2007 Miloslav Trmac - 6.3.6-2 - Let KPOP use PASS again Resolves: #223661 file-roller-2.17.90-1.fc7 ------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 gail-1.10.1-1.fc7 ----------------- * Mon Jan 22 2007 Matthias Clasen - 1.10.1-1 - Update to 1.10.1 gcalctool-5.9.11-1.fc7 ---------------------- * Mon Jan 22 2007 Matthias Clasen - 5.9.11-1 - Update to 5.9.11 gdm-1:2.17.6-1.fc7 ------------------ * Tue Jan 23 2007 Matthias Clasen - 1:2.17.6-1 - Update to 2.17.6 gedit-1:2.17.4-1.fc7 -------------------- * Tue Jan 23 2007 Matthias Clasen - 1:2.17.4-1 - Update to 2.17.4 gnome-games-1:2.17.90-2.fc7 --------------------------- * Mon Jan 22 2007 Matthias Clasen - 1:2.17.90-2 - Update extra data to 2.17.90 * Mon Jan 22 2007 Matthias Clasen - 1:2.17.90-1 - Update to 2.17.90 - Fix some directory ownership issues gnome-icon-theme-2.17.90-1.fc7 ------------------------------ gnome-media-2.17.90-1.fc7 ------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 gnome-power-manager-2.17.90-1.fc7 --------------------------------- * Tue Jan 23 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 gnome-screensaver-2.17.6-1.fc7 ------------------------------ * Mon Jan 22 2007 Matthias Clasen - 2.17.6-1 - Update to 2.17.6 gnome-session-2.17.90.1-1.fc7 ----------------------------- * Tue Jan 23 2007 Matthias Clasen - 2.17.90.1-1 - Update to 2.17.90.1 gnome-system-monitor-2.17.6-1.fc7 --------------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.6-1 - Update to 2.17.6 gnome-terminal-2.17.90-1.fc7 ---------------------------- * Tue Jan 23 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 gnome-themes-2.17.90-1.fc7 -------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 gnome-utils-1:2.17.90-1.fc7 --------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 - Drop requires for gcalctool, gucharmap, zenity gnome-vfs2-2.17.90-1.fc7 ------------------------ * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 grep-2.5.1-57.fc7 ----------------- * Mon Jan 22 2007 Tim Waugh 2.5.1-57 - Make preun scriptlet unconditionally succeed (bug #223697). gtk2-2.10.9-1.fc7 ----------------- * Mon Jan 22 2007 Matthias Clasen - 2.10.9-1 - Update to 2.10.9 gtk2-engines-2.9.2-1.fc7 ------------------------ * Mon Jan 22 2007 Matthias Clasen - 2.9.2-1 - Update to 2.9.2 hsqldb-1:1.8.0.7-2jpp.2 ----------------------- * Mon Jan 22 2007 Deepak Bhole 1:1.8.0.7-1jpp.2 - Bump release to build in rawhide * Mon Jan 22 2007 Deepak Bhole 1:1.8.0.7-1jpp.1 - Updgrade to 1.8.0.7 * Thu Nov 30 2006 Deepak Bhole 1:1.8.0.4-4jpp.2 - Bump release to build in rawhide jakarta-commons-digester-0:1.7-6jpp.1 ------------------------------------- * Mon Jan 22 2007 Vivek Lakshmanan - 0:1.7-6jpp.1 - Resynch with JPP release * Tue Jan 16 2007 Vivek Lakshmanan - 0:1.7-5jpp.3 - Update component-info.xml to add scm and tag attribute instead of a comment - Remove the export of a versioned jar * Tue Jan 09 2007 Vivek Lakshmanan - 0:1.7-5jpp.2 - Upgrade to latest from JPP and FC6 - Remove old RHUG specific trigger - Add support for conditional build of repolib package - Build repolib package by default libbonobo-2.17.90-1.fc7 ----------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 * Mon Sep 04 2006 Matthias Clasen - 2.16.0-1.fc6 - Update to 2.16.0 - Require pkgconfig in the -devel package * Mon Aug 14 2006 Matthias Clasen - 2.15.3-1.fc6 - Update to 2.15.3 libbonoboui-2.17.90-1.fc7 ------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 libgcrypt-1.2.3-2 ----------------- * Mon Jan 22 2007 Nalin Dahyabhai - 1.2.3-2 - make use of install-info more failsafe (Ville Skytt??, #223705) libgnome-2.17.90-1.fc7 ---------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 * Wed Jan 10 2007 Matthias Clasen - 2.17.3-1 - Update to 2.17.3 * Wed Jan 10 2007 Matthias Clasen - 2.17.2-1 - Update to 2.17.2 libgnomeprint22-2.17.90-1.fc7 ----------------------------- * Tue Jan 23 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 libgnomeprintui22-2.17.90-1.fc7 ------------------------------- * Tue Jan 23 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 * Sun Nov 12 2006 Matthias Clasen - 2.17.0-1 - Update to 2.17.0 - Don't ship static libraries - Require pkgconfig in the -devel package libgnomeui-2.17.90-1.fc7 ------------------------ * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 libthai-0.1.7-5.fc7 ------------------- * Mon Jan 22 2007 Behdad Esfahbod 0.1.7-5 - Export _th_*_tbl symbols too. They are accessed by some of the macros. libvirt-0.1.11-1.fc7 -------------------- * Mon Jan 22 2007 Daniel Veillard 0.1.11-1.fc7 - finish inactive Xen domains support - memory leak fix - RelaxNG schemas for XML configs mc-1:4.6.1a-40.fc7 ------------------ * Mon Jan 22 2007 Jindrich Novy 4.6.1a-40 - update to new upstream CVS snapshot - drop upstreamed tmpcrash patch - reenable gpm support as it is now fixed (#168076) * Thu Jan 04 2007 Jindrich Novy 4.6.1a-39 - update to new CVS snapshot (fixes #220828) - update bindings again * Thu Dec 21 2006 Jindrich Novy 4.6.1a-38 - rebuild because of the %{_host} macro change (Related: #220273) nautilus-2.17.90-1.fc7 ---------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 nautilus-cd-burner-2.17.6-1.fc7 ------------------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.6-1 - Update to 2.17.6 nspr-4.6.5-1 ------------ * Mon Jan 22 2007 Wan-Teh Chang - 4.6.5-1 - Update to 4.6.5 * Tue Jan 16 2007 Kai Engert - 4.6.4-2 - Include upstream patch to fix ipv6 support (rhbz 222554) * Tue Nov 21 2006 Kai Engert - 4.6.4-1 - Update to 4.6.4 nss-3.11.4-5.fc7 ---------------- * Tue Jan 09 2007 Bob Relyea - 3.11.4-4 - disable ECC, cleanout dead code * Tue Nov 28 2006 Kai Engert - 3.11.4-1 - Update to 3.11.4 * Thu Sep 14 2006 Kai Engert - 3.11.3-2 - Revert the attempt to require latest NSPR, as it is not yet available in the build infrastructure. orca-2.17.90-1.fc7 ------------------ * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 pango-1.15.5-1.fc7 ------------------ * Mon Jan 22 2007 Behdad Esfahbod - 1.15.5-1 - Update to 1.15.5. - Drop upstreamed pango-1.15.4-slighthint.patch parted-1.8.2-3.fc7 ------------------ * Mon Jan 22 2007 David Cantrell - 1.8.2-3 - Remove BR for libtermcap-devel - Specifically preserve starting alignment of 0x800 on Windows Vista (see http://support.microsoft.com/kb/923332 for details) - Fix incorrect sector parameter used to initialize a new PedAlignment python-virtinst-0.100.0-1.fc7 ----------------------------- * Mon Jan 22 2007 Daniel P. Berrange - 0.100.0-1.fc7 - Updated to 0.100.0 which now uses libvirt inactive domain support needed to operate correctly against xen 3.0.4 * Mon Dec 18 2006 Daniel P. Berrange - 0.98.0-3.fc7 - don't traceback on invalid memory param (gcosta, #219270) - let the console come back quicker to help with HVM installs (#212024) redhat-artwork-5.0.8-4.fc7 -------------------------- * Mon Jan 22 2007 Matthias Clasen 5.0.8-4 - Switch default icon theme to Echo selinux-policy-2.5.1-4.fc7 -------------------------- * Wed Jan 10 2007 Dan Walsh 2.5.1-4 - Begin adding user confinement to targeted policy * Wed Jan 10 2007 Dan Walsh 2.5.1-2 - Fixes for prelink, ktalkd, netlabel * Mon Jan 08 2007 Dan Walsh 2.5.1-1 - Allow prelink when run from rpm to create tmp files Resolves: #221865 - Remove file_context for exportfs Resolves: #221181 - Allow spamassassin to create ~/.spamassissin Resolves: #203290 - Allow ssh access to the krb tickets - Allow sshd to change passwd - Stop newrole -l from working on non securetty Resolves: #200110 - Fixes to run prelink in MLS machine Resolves: #221233 - Allow spamassassin to read var_lib_t dir Resolves: #219234 spamassassin-3.1.7-5.fc7 ------------------------ * Mon Jan 22 2007 Warren Togami 3.1.7-5 - fix typo in logrotate.d (#223817) * Thu Jan 18 2007 Warren Togami - Options for RHEL4 * spamc/spamd cannot connect over IPv6 or SSL * sa-update is disabled The above functionality requires perl modules not included in RHEL4. You may still use them if you get those perl modules from elsewhere. RHEL5 ships these perl modules. * Thu Dec 14 2006 Warren Togami - 3.1.7-4 - add standardized sa-update cron script, disabled by default traceroute-1:2.0.3-1.fc7 ------------------------ * Mon Jan 22 2007 Martin Bacovsky - 2.0.3-1.fc7 - Resolves: #222577 - man page with execute bit - Resolves: #223784 - new traceroute breaks scripts - Resolves: #223795 - /bin/tcptraceroute symlink occludes alternate tcptraceroute package virt-manager-0.3.0-1.fc7 ------------------------ * Mon Jan 22 2007 Daniel P. Berrange = 0.100.0 and libvirt >= 0.1.11 for ianctive domain management capabilities - Add progress bars during VM creation stage - Improved reliability of VNC console - Updated translations again - Added destroy option to menu bar to forceably kill a guest - Visually differentiate allocated memory, from actual used memory on host - Validate file magic when restoring a guest from a savd file - Performance work on domain listing - Allow creation of non-sparse files - Fix backspace key in serial console vte-0.15.2-1.fc7 ---------------- * Mon Jan 22 2007 Behdad Esfahbod 0.15.2-1 - Update to 0.15.2 - Drop upstreamed vte-0.15.1-segfault.patch xen-3.0.4-2.fc7 --------------- * Mon Jan 22 2007 Daniel P. Berrange - 3.0.4-2 - Ensure the arch-x86 header files are included in xen-devel package - Bring back patch to move /var/xen/dump to /var/lib/xen/dump - Make /var/log/xen mode 0700 yum-3.1.0-2.fc7 --------------- * Mon Jan 22 2007 Jeremy Katz - 3.1.0-2 - fix typo in yum-updatesd * Mon Jan 22 2007 Jeremy Katz - 3.1.0-1 - update to 3.1.0 * Fri Dec 15 2006 Jeremy Katz - 3.0.1-6 - fix yum provides (#219716) zenity-2.17.90-1.fc7 -------------------- * Mon Jan 22 2007 Matthias Clasen - 2.17.90-1 - Update to 2.17.90 Broken deps for s390x ---------------------------------------------------------- anaconda - 11.2.0.14-1.s390x requires system-config-keyboard emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for s390 ---------------------------------------------------------- anaconda - 11.2.0.14-1.s390 requires system-config-keyboard emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 Broken deps for i386 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for ppc64 ---------------------------------------------------------- anaconda - 11.2.0.14-1.ppc64 requires system-config-keyboard emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for ia64 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for x86_64 ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl Broken deps for ppc ---------------------------------------------------------- emacspeak - 25-1.fc7.noarch requires /usr/bin/tcl From ernesto at ornl.gov Tue Jan 23 11:57:11 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Tue, 23 Jan 2007 06:57:11 -0500 Subject: Ruby on Rails with Fedora Message-ID: <1169553431.10373.11.camel@panther> Hi, After a yum install of ruby: Installed: eruby.x86_64 0:1.0.5-6.1 eruby-devel.i386 0:1.0.5-6.1 eruby-devel.x86_64 0:1.0.5-6.1 eruby-libs.i386 0:1.0.5-6.1 eruby-libs.x86_64 0:1.0.5-6.1 graphviz-ruby.x86_64 0:2.8-5.fc6 ruby.x86_64 0:1.8.5.2-1.fc6 ruby-activerecord.noarch 0:1.15.1-1.fc6 ruby-activesupport.noarch 0:1.4.0-1.fc6 ruby-bdb.x86_64 0:0.6.0-1.fc6 ruby-devel.i386 0:1.8.5.2-1.fc6 ruby-devel.x86_64 0:1.8.5.2-1.fc6 ruby-docs.x86_64 0:1.8.5.2-1.fc6 ruby-irb.x86_64 0:1.8.5.2-1.fc6 ruby-libs.i386 0:1.8.5.2-1.fc6 ruby-libs.x86_64 0:1.8.5.2-1.fc6 ruby-mode.x86_64 0:1.8.5.2-1.fc6 ruby-mysql.x86_64 0:2.7.1-2.fc6 ruby-postgres.x86_64 0:0.7.1-5.fc6 ruby-racc.noarch 0:1.4.5-2.fc6 ruby-rdoc.x86_64 0:1.8.5.2-1.fc6 ruby-ri.x86_64 0:1.8.5.2-1.fc6 ruby-sqlite3.x86_64 0:1.1.0-6.fc6 ruby-tcltk.x86_64 0:1.8.5.2-1.fc6 rubygems.noarch 0:0.9.1-1.fc6 subversion-ruby.x86_64 0:1.4.2-2.fc6 Dependency Installed: emacs-common.x86_64 0:21.4-17 graphviz.x86_64 0:2.8-5.fc6 mysql.x86_64 0:5.0.27-1.fc6 Complete! How to get Rails? ==================================================================== [root at panther 1.8]# gem install rails --include-dependencies /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in `gem_original_require': no such file to load -- sources (LoadError) from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in `require' from /usr/lib/ruby/site_ruby/1.8/rubygems/source_info_cache.rb:6 from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in `gem_original_require' from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in `require' from /usr/lib/ruby/site_ruby/1.8/rubygems/remote_installer.rb:12 from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in `gem_original_require' from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in `require' from /usr/lib/ruby/site_ruby/1.8/rubygems.rb:111:in `manage_gems' from /usr/bin/gem:10 From D.Mierzejewski at icm.edu.pl Tue Jan 23 13:11:39 2007 From: D.Mierzejewski at icm.edu.pl (Dominik 'Rathann' Mierzejewski) Date: Tue, 23 Jan 2007 14:11:39 +0100 Subject: Fighting the i386 plague In-Reply-To: References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> Message-ID: <20070123131139.GB16349@ws-gradcol1.icm.edu.pl> On Mon, Jan 22, 2007 at 06:25:09PM -0500, Sam Varshavchik wrote: > Gregory Maxwell writes: > > >Not needed packages.. files.. > > > >Right now foo.x86_64.rpm and foo.i386.rpm can provide > >/usr/share/foo/important_arch_neutral_file_such_as_a_manpage > > > >If you remove foo.i386.rpm the shared file will get nuked. > > > >RPM can recognize such overlaps and do the right thing, but some code > >which greatly speeds up dependency computation breaks that. > > No, this is the other way around. rpm is broken. If both package X and > package Y install the same file, removing package X _SHOULD NOT_ remove the > shared file. If two packages own the same file then it's a bug in packaging! Regards, R. -- Dominik 'Rathann' Mierzejewski Interdisciplinary Centre for Mathematical and Computational Modelling Warsaw University | http://www.icm.edu.pl | tel. +48 (22) 5540810 From jkeating at redhat.com Tue Jan 23 13:26:22 2007 From: jkeating at redhat.com (Jesse Keating) Date: Tue, 23 Jan 2007 08:26:22 -0500 Subject: Fighting the i386 plague In-Reply-To: <20070123131139.GB16349@ws-gradcol1.icm.edu.pl> References: <975.1169500184@lwn.net> <20070123131139.GB16349@ws-gradcol1.icm.edu.pl> Message-ID: <200701230826.22696.jkeating@redhat.com> On Tuesday 23 January 2007 08:11, Dominik 'Rathann' Mierzejewski wrote: > If two packages own the same file then it's a bug in packaging! Welcome to multilib packages. Many files will be exactly the same between the .i386 and the .x86_64 packages. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From pbrobinson at gmail.com Tue Jan 23 13:28:37 2007 From: pbrobinson at gmail.com (Peter Robinson) Date: Tue, 23 Jan 2007 13:28:37 +0000 Subject: Fighting the i386 plague In-Reply-To: References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> Message-ID: <5256d0b0701230528m4a270a6lcd44235f0b4c5a1c@mail.gmail.com> > > Not needed packages.. files.. > > > > Right now foo.x86_64.rpm and foo.i386.rpm can provide > > /usr/share/foo/important_arch_neutral_file_such_as_a_manpage > > > > If you remove foo.i386.rpm the shared file will get nuked. > > > > RPM can recognize such overlaps and do the right thing, but some code > > which greatly speeds up dependency computation breaks that. > > No, this is the other way around. rpm is broken. If both package X and > package Y install the same file, removing package X _SHOULD NOT_ remove the > shared file. > > And that's the way it works for everything except, inexplicably, %doc files > that go into /usr/share/doc, and locale files in /usr/share/locale. This is > a known bug that's apparently been in rpm for years. It's supposedly fixed > in the "upstream" release of rpm, and who knows when that's going to go into > Fedora. rpm development has stagnated. Rather than bite the bullet and fix > some of the overgrown bloat and legacy cruft in rpm, the current solution > seems to be to just affix one bandaid after another, i.e. the kludge with > installing the kernel rpms correctly, the external kmdl rpms, etc? There were disagreements with the previous RPM maintainer. There's now a revived rpm project to fix these issues and get out new releases rather than the highly patched versions that a lot of distros have. See this post for further details https://lists.dulug.duke.edu/pipermail/rpm-announce/2006-December/000000.html and I think it was sent to various fedora lists too. Peter From D.Mierzejewski at icm.edu.pl Tue Jan 23 13:29:07 2007 From: D.Mierzejewski at icm.edu.pl (Dominik 'Rathann' Mierzejewski) Date: Tue, 23 Jan 2007 14:29:07 +0100 Subject: Fighting the i386 plague In-Reply-To: <200701230826.22696.jkeating@redhat.com> References: <975.1169500184@lwn.net> <20070123131139.GB16349@ws-gradcol1.icm.edu.pl> <200701230826.22696.jkeating@redhat.com> Message-ID: <20070123132907.GE16349@ws-gradcol1.icm.edu.pl> On Tue, Jan 23, 2007 at 08:26:22AM -0500, Jesse Keating wrote: > On Tuesday 23 January 2007 08:11, Dominik 'Rathann' Mierzejewski wrote: > > If two packages own the same file then it's a bug in packaging! > > Welcome to multilib packages. Many files will be exactly the same between > the .i386 and the .x86_64 packages. There's no reason that they should. With careful packaging it's possible to have libraries (i.e. the only binaries that need to be multilib'd) in separate packages. Regards, -- Dominik 'Rathann' Mierzejewski Interdisciplinary Centre for Mathematical and Computational Modelling Warsaw University | http://www.icm.edu.pl | tel. +48 (22) 5540810 From jeff at ocjtech.us Tue Jan 23 14:38:01 2007 From: jeff at ocjtech.us (Jeffrey C. Ollie) Date: Tue, 23 Jan 2007 08:38:01 -0600 Subject: Fighting the i386 plague In-Reply-To: <5256d0b0701230528m4a270a6lcd44235f0b4c5a1c@mail.gmail.com> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> <5256d0b0701230528m4a270a6lcd44235f0b4c5a1c@mail.gmail.com> Message-ID: <1169563081.3834.0.camel@lt21223.campus.dmacc.edu> On Tue, 2007-01-23 at 13:28 +0000, Peter Robinson wrote: > > There were disagreements with the previous RPM maintainer. There's now > a revived rpm project to fix these issues and get out new releases > rather than the highly patched versions that a lot of distros have. > See this post for further details > https://lists.dulug.duke.edu/pipermail/rpm-announce/2006-December/000000.html > and I think it was sent to various fedora lists too. Red Hat is also hiring someone to hack on RPM: http://redhat.hrdpt.com/cgi-bin/a/highlightjob.cgi?jobid=1949 Jeff -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From ddmbox2 at yahoo.co.uk Tue Jan 23 15:35:18 2007 From: ddmbox2 at yahoo.co.uk (dexter) Date: Tue, 23 Jan 2007 15:35:18 +0000 Subject: sata_promise.c patch from libata-dev.git#upstream In-Reply-To: <003101c73e70$cfd34fe0$0a01a8c0@jbsys> References: <003101c73e70$cfd34fe0$0a01a8c0@jbsys> Message-ID: <200701231535.18791.ddmbox2@yahoo.co.uk> On Mon January 22 2007 22:01, Jim Bevier wrote: > Dave, > > Here is the pata drive on sata_promise controller patch. ?It is the one > that will someday find its way into 2.6.21. ?Until then, please include > this patch in the kernel build to provide pata drive support. ?I would be > most thankful. +1 me too, pretty please with knobs on or before test1 freeze, did I say please? ok add some shiny bits :-) ...dex ___________________________________________________________ Inbox full of spam? Get leading spam protection and 1GB storage with All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html From jkeating at redhat.com Tue Jan 23 16:23:27 2007 From: jkeating at redhat.com (Jesse Keating) Date: Tue, 23 Jan 2007 11:23:27 -0500 Subject: Fighting the i386 plague In-Reply-To: <20070123132907.GE16349@ws-gradcol1.icm.edu.pl> References: <975.1169500184@lwn.net> <200701230826.22696.jkeating@redhat.com> <20070123132907.GE16349@ws-gradcol1.icm.edu.pl> Message-ID: <200701231123.36145.jkeating@redhat.com> On Tuesday 23 January 2007 08:29, Dominik 'Rathann' Mierzejewski wrote: > There's no reason that they should. With careful packaging it's possible > to have libraries (i.e. the only binaries that need to be multilib'd) > in separate packages. So lets see some sustainable examples. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From jkeating at redhat.com Tue Jan 23 16:25:04 2007 From: jkeating at redhat.com (Jesse Keating) Date: Tue, 23 Jan 2007 11:25:04 -0500 Subject: Fighting the i386 plague In-Reply-To: <1169563081.3834.0.camel@lt21223.campus.dmacc.edu> References: <975.1169500184@lwn.net> <5256d0b0701230528m4a270a6lcd44235f0b4c5a1c@mail.gmail.com> <1169563081.3834.0.camel@lt21223.campus.dmacc.edu> Message-ID: <200701231125.04996.jkeating@redhat.com> On Tuesday 23 January 2007 09:38, Jeffrey C. Ollie wrote: > Red Hat is also hiring someone to hack on RPM: > > http://redhat.hrdpt.com/cgi-bin/a/highlightjob.cgi?jobid=1949 Red Hat has had somebody to work on rpm for a while. The large problem is that we've had one person, and the job is too big for one person. This is not finding somebody to take over an abandoned software, its finding somebody to help our current rpm maintainer. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From bruno at wolff.to Tue Jan 23 17:07:27 2007 From: bruno at wolff.to (Bruno Wolff III) Date: Tue, 23 Jan 2007 11:07:27 -0600 Subject: Fighting the i386 plague In-Reply-To: <20070123131139.GB16349@ws-gradcol1.icm.edu.pl> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> <20070123131139.GB16349@ws-gradcol1.icm.edu.pl> Message-ID: <20070123170727.GB6693@wolff.to> On Tue, Jan 23, 2007 at 14:11:39 +0100, Dominik 'Rathann' Mierzejewski wrote: > > If two packages own the same file then it's a bug in packaging! If the shared file is the same in both packages, this can be a simpler solution than creating a whole other package just to contain the one shared file. From jwilliam at xmission.com Tue Jan 23 17:52:24 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Tue, 23 Jan 2007 10:52:24 -0700 Subject: Help fix fc7 rescue. minstg2.img Message-ID: <000601c73f17$3d3fd660$020aa8c0@a18> Please help me fix the Fedora 7 rescue image. Downloaded the Jan 23 diskboot.img file and I tried it today. Something has changed because I no longer see the message about libncurses.so.5 in the ALT-F2 window. ALT-F3 window says: INFO : NFS install method detected, will use RHupdates/ INFO : Running anaconda script /usr/bin/anaconda INFO : using only installclass _Fedora INFO : _Fedora in only installclass, using it Main window says: File "/usr/bin/anaconda", line 694, in rescue.runRescue(anaconda) File "/usr/lib/anaconda/rescue.py", line 272, in runRescue Anaconda.setMethod() TypeError: setMethod() takes exactly 2 arguments (1 given) Install exited abnormally [1/1] Blaw blaw you may safely reboot your system I am unable to type in the ALT-F2 window at the sh-3.2# prompt. I am booting from USB flash drive and loading it over NFS. Maybe put a sleep in so that I could look around before it dies? I am able to type in the ALT-F2 window for a few secs before it dies. Was able to do ls /usr/lib. What can I look at to help figure this out? From lwn-ft at lwn.net Tue Jan 23 17:57:44 2007 From: lwn-ft at lwn.net (Jonathan Corbet) Date: Tue, 23 Jan 2007 10:57:44 -0700 Subject: su (PAM) gotcha Message-ID: <9821.1169575064@lwn.net> In case this is useful to anybody...after yesterday's rawhide update (my first in a week or two), any attempt to run su would fail with a quick "incorrect password" message. Before it ever asked for a password. Even I can't fat-finger something if I don't even get the opportunity to type. A quick look in /etc/pam.d revealed my old "su" file from a few years back, which I had never changed. There was an "su.rpmnew" file there as well, dated last July. Switching to the new one made my problem go away. I've not had the time to figure out just what change made the difference - the PAM files have clearly evolved considerably over time. I suspect I may not be the only one who runs into this; people who have been tracking rawhide for a bit may want to take a quick look at the state of their PAM configuration files. I wonder if it would be possible to make the package update somehow detect that the new system is broken and scream accordingly? jon From vonbrand at inf.utfsm.cl Tue Jan 23 20:34:51 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Tue, 23 Jan 2007 17:34:51 -0300 Subject: su (PAM) gotcha In-Reply-To: <9821.1169575064@lwn.net> References: <9821.1169575064@lwn.net> Message-ID: <200701232034.l0NKYpUd026312@laptop13.inf.utfsm.cl> Jonathan Corbet wrote: > In case this is useful to anybody...after yesterday's rawhide update (my > first in a week or two), any attempt to run su would fail with a quick > "incorrect password" message. Before it ever asked for a password. > Even I can't fat-finger something if I don't even get the opportunity to > type. Here I can't login at all to my LDAP handled account (x86_64, pam-0.99.7.0-2.fc7) (BZ #224048). Yes, I did clean up the *.rpmnew cruft (strangely, all the original and .rpmnew files cmp(1)ed equal, and had the same permissions). Besides, pam and authconfig fight over /etc/pam.d/system-auth, one wants it a file, the other a symlink to system-auth-ac. -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From michal at harddata.com Tue Jan 23 21:30:10 2007 From: michal at harddata.com (Michal Jaegermann) Date: Tue, 23 Jan 2007 14:30:10 -0700 Subject: su (PAM) gotcha In-Reply-To: <200701232034.l0NKYpUd026312@laptop13.inf.utfsm.cl> References: <9821.1169575064@lwn.net> <200701232034.l0NKYpUd026312@laptop13.inf.utfsm.cl> Message-ID: <20070123213010.GA16283@mail.harddata.com> On Tue, Jan 23, 2007 at 05:34:51PM -0300, Horst H. von Brand wrote: > > Yes, I did clean up the *.rpmnew cruft (strangely, all the original and > .rpmnew files cmp(1)ed equal, and had the same permissions). Especially in a multilib situtation a lots of .rpmnew files may show up which do not differ from what is already installed. I use the following script to clean that up #!/bin/sh [ "$1" ] || { echo "at least one directory name is needed" >&2 exit 1 } IFS='' while [ "$1" ] ; do cd "$1" || { echo "cannot change to $1" ; continue; } find $1 -name '*.rpmnew' | while read -r f ; do o="${f%.rpmnew}" echo $f to $o cmp "$f" "$o" && \mv "$f" "$o" done shift done and I am checking what is left after such cleanup. Michal From michal at harddata.com Tue Jan 23 21:37:18 2007 From: michal at harddata.com (Michal Jaegermann) Date: Tue, 23 Jan 2007 14:37:18 -0700 Subject: strangely lean menus Message-ID: <20070123213718.GB16283@mail.harddata.com> I am not sure in which moment but I lost all "Preferences" and "Administration" entries from my menus on a gnome desktop. Bug or a "feature" or I am the only one with this problem? Somehow I did not discovered anything in bugzilla on the subject. Surely this is a serious PITA. Michal From lwn-ft at lwn.net Tue Jan 23 21:40:39 2007 From: lwn-ft at lwn.net (Jonathan Corbet) Date: Tue, 23 Jan 2007 14:40:39 -0700 Subject: strangely lean menus In-Reply-To: Your message of "Tue, 23 Jan 2007 14:37:18 MST." <20070123213718.GB16283@mail.harddata.com> Message-ID: <16336.1169588439@lwn.net> Michal Jaegermann wrote: > I am not sure in which moment but I lost all "Preferences" > and "Administration" entries from my menus on a gnome desktop. > Bug or a "feature" or I am the only one with this problem? You're not the only one - I was just about to send a message on the same thing. jon From dr.diesel at gmail.com Tue Jan 23 21:41:27 2007 From: dr.diesel at gmail.com (Dr. Diesel) Date: Tue, 23 Jan 2007 15:41:27 -0600 Subject: strangely lean menus In-Reply-To: <20070123213718.GB16283@mail.harddata.com> References: <20070123213718.GB16283@mail.harddata.com> Message-ID: <2a28d2ab0701231341i47598acar272f0d8c3ca7bad0@mail.gmail.com> Yep, same here. On 1/23/07, Michal Jaegermann wrote: > I am not sure in which moment but I lost all "Preferences" > and "Administration" entries from my menus on a gnome desktop. > Bug or a "feature" or I am the only one with this problem? > Somehow I did not discovered anything in bugzilla on the > subject. Surely this is a serious PITA. > > Michal > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list > From david at lovesunix.net Tue Jan 23 21:43:31 2007 From: david at lovesunix.net (David Nielsen) Date: Tue, 23 Jan 2007 22:43:31 +0100 Subject: strangely lean menus In-Reply-To: <16336.1169588439@lwn.net> References: <16336.1169588439@lwn.net> Message-ID: <1169588611.14068.1.camel@dawkins> On tir, 2007-01-23 at 14:40 -0700, Jonathan Corbet wrote: > Michal Jaegermann wrote: > > > I am not sure in which moment but I lost all "Preferences" > > and "Administration" entries from my menus on a gnome desktop. > > Bug or a "feature" or I am the only one with this problem? > > > > You're not the only one - I was just about to send a message on the same > thing. > > Upstream GNOME switched to the gnome-control-center which caused the old preferences menus to be removed. Matthias Clasen is currently talking to upstream on d-d-l on the issue. - David -- "Ridicule is the only weapon that can be used against unintelligible propositions. Ideas must be distinct before reason can act upon them.? -Thomas Jefferson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From vonbrand at inf.utfsm.cl Tue Jan 23 22:07:51 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Tue, 23 Jan 2007 19:07:51 -0300 Subject: su (PAM) gotcha In-Reply-To: <20070123213010.GA16283@mail.harddata.com> References: <9821.1169575064@lwn.net> <200701232034.l0NKYpUd026312@laptop13.inf.utfsm.cl> <20070123213010.GA16283@mail.harddata.com> Message-ID: <200701232207.l0NM7pqm027903@laptop13.inf.utfsm.cl> Michal Jaegermann wrote: > On Tue, Jan 23, 2007 at 05:34:51PM -0300, Horst H. von Brand wrote: > > > > Yes, I did clean up the *.rpmnew cruft (strangely, all the original and > > .rpmnew files cmp(1)ed equal, and had the same permissions). > > Especially in a multilib situtation a lots of .rpmnew files may > show up which do not differ from what is already installed. I understand that this is a bug... > I use the following script to clean that up > #!/bin/sh > [ "$1" ] || { > echo "at least one directory name is needed" >&2 > exit 1 > } > IFS='' > while [ "$1" ] ; do > cd "$1" || { echo "cannot change to $1" ; continue; } > find $1 -name '*.rpmnew' | while read -r f ; do > o="${f%.rpmnew}" > echo $f to $o > cmp "$f" "$o" && \mv "$f" "$o" > done > shift > done This assumes the directories are all absolute paths... and you don't check for possibly different owner/group/permission. > and I am checking what is left after such cleanup. Nice. I've written the equivalent a dozen times now on the command line ;-) -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From vonbrand at inf.utfsm.cl Tue Jan 23 22:08:57 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Tue, 23 Jan 2007 19:08:57 -0300 Subject: strangely lean menus In-Reply-To: <20070123213718.GB16283@mail.harddata.com> References: <20070123213718.GB16283@mail.harddata.com> Message-ID: <200701232208.l0NM8v8i027927@laptop13.inf.utfsm.cl> Michal Jaegermann wrote: > I am not sure in which moment but I lost all "Preferences" > and "Administration" entries from my menus on a gnome desktop. > Bug or a "feature" or I am the only one with this problem? > Somehow I did not discovered anything in bugzilla on the > subject. Surely this is a serious PITA. BZ #223968 -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From michal at harddata.com Tue Jan 23 22:40:57 2007 From: michal at harddata.com (Michal Jaegermann) Date: Tue, 23 Jan 2007 15:40:57 -0700 Subject: strangely lean menus In-Reply-To: <200701232208.l0NM8v8i027927@laptop13.inf.utfsm.cl> References: <20070123213718.GB16283@mail.harddata.com> <200701232208.l0NM8v8i027927@laptop13.inf.utfsm.cl> Message-ID: <20070123224057.GA18943@mail.harddata.com> On Tue, Jan 23, 2007 at 07:08:57PM -0300, Horst H. von Brand wrote: > Michal Jaegermann wrote: > > > I am not sure in which moment but I lost all "Preferences" > > and "Administration" entries from my menus on a gnome desktop. > > BZ #223968 Ah, but this is not really a gnome-panel thing, I presume. It seems to me that this would be gnome-menus or redhat-menus. In any case it appears that all of that will end with Ray. :-) Michal From rstrode at redhat.com Tue Jan 23 22:43:36 2007 From: rstrode at redhat.com (Ray Strode) Date: Tue, 23 Jan 2007 17:43:36 -0500 Subject: strangely lean menus In-Reply-To: <20070123224057.GA18943@mail.harddata.com> References: <20070123213718.GB16283@mail.harddata.com> <200701232208.l0NM8v8i027927@laptop13.inf.utfsm.cl> <20070123224057.GA18943@mail.harddata.com> Message-ID: <1169592216.11902.0.camel@halflap.boston.devel.redhat.com> Hi, On Tue, 2007-01-23 at 15:40 -0700, Michal Jaegermann wrote: > On Tue, Jan 23, 2007 at 07:08:57PM -0300, Horst H. von Brand wrote: > > Michal Jaegermann wrote: > > > > > I am not sure in which moment but I lost all "Preferences" > > > and "Administration" entries from my menus on a gnome desktop. > > > > BZ #223968 > > Ah, but this is not really a gnome-panel thing, I presume. > It seems to me that this would be gnome-menus or redhat-menus. > In any case it appears that all of that will end with Ray. :-) Well, Matthias is looking at it for now. I'm going to look into it more next week after I get some RHEL work done. --Ray From michal at harddata.com Tue Jan 23 22:49:47 2007 From: michal at harddata.com (Michal Jaegermann) Date: Tue, 23 Jan 2007 15:49:47 -0700 Subject: su (PAM) gotcha In-Reply-To: <200701232207.l0NM7pqm027903@laptop13.inf.utfsm.cl> References: <9821.1169575064@lwn.net> <200701232034.l0NKYpUd026312@laptop13.inf.utfsm.cl> <20070123213010.GA16283@mail.harddata.com> <200701232207.l0NM7pqm027903@laptop13.inf.utfsm.cl> Message-ID: <20070123224947.GB18943@mail.harddata.com> On Tue, Jan 23, 2007 at 07:07:51PM -0300, Horst H. von Brand wrote: > Michal Jaegermann wrote: > > On Tue, Jan 23, 2007 at 05:34:51PM -0300, Horst H. von Brand wrote: > > > > > > Yes, I did clean up the *.rpmnew cruft (strangely, all the original and > > > .rpmnew files cmp(1)ed equal, and had the same permissions). > > > > Especially in a multilib situtation a lots of .rpmnew files may > > show up which do not differ from what is already installed. > > I understand that this is a bug... I am not entirely sure (unless in a broad sense). If the same file comes from .i386 package and .x86_64 package then most likely it may have at least different time-stamps so the next update will see a difference and it should create .rpmnew. > This assumes the directories are all absolute paths... Worksforme so far. It possible that it can be made a bit smarter. One advantage is that it is really simple. :-) > and you don't check > for possibly different owner/group/permission. That is why I use those .rpmnew to replace old ones. Michal From jacliburn at bellsouth.net Tue Jan 23 21:48:21 2007 From: jacliburn at bellsouth.net (Jay Cliburn) Date: Tue, 23 Jan 2007 15:48:21 -0600 Subject: strangely lean menus In-Reply-To: <20070123213718.GB16283@mail.harddata.com> References: <20070123213718.GB16283@mail.harddata.com> Message-ID: <45B682A5.10807@bellsouth.net> Michal Jaegermann wrote: > I am not sure in which moment but I lost all "Preferences" > and "Administration" entries from my menus on a gnome desktop. > Bug or a "feature" or I am the only one with this problem? > Somehow I did not discovered anything in bugzilla on the > subject. Surely this is a serious PITA. > > Michal > Me too. x86_64. Jay From jwilliam at xmission.com Wed Jan 24 01:21:33 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Tue, 23 Jan 2007 18:21:33 -0700 Subject: fc7 Package Updater - uncheck all? Message-ID: <002601c73f55$fc4c7e30$020aa8c0@a18> Is there a way to uncheck all? I tried shift and select and it does select multiple items, but it only will uncheck one thing. I wanted to first update yum and then do the other updates. Would be nice to be able to uncheck all or check all. If I have missed it please point me to it. If not I would like to request the feature. Thanks! From jwilliam at xmission.com Wed Jan 24 02:53:38 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Tue, 23 Jan 2007 19:53:38 -0700 Subject: Help fix fc7 rescue. minstg2.img In-Reply-To: <000601c73f17$3d3fd660$020aa8c0@a18> References: <000601c73f17$3d3fd660$020aa8c0@a18> Message-ID: <002a01c73f62$d909c6f0$020aa8c0@a18> > -----Original Message----- > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > bounces at redhat.com] On Behalf Of Jerry Williams > Sent: Tuesday, January 23, 2007 10:52 AM > To: fedora-test-list at redhat.com > Subject: Help fix fc7 rescue. minstg2.img > > Please help me fix the Fedora 7 rescue image. > Downloaded the Jan 23 diskboot.img file and I tried it today. > Something has changed because I no longer see the message about > libncurses.so.5 in the ALT-F2 window. > > ALT-F3 window says: > INFO : NFS install method detected, will use RHupdates/ > INFO : Running anaconda script /usr/bin/anaconda > INFO : using only installclass _Fedora > INFO : _Fedora in only installclass, using it > > Main window says: > File "/usr/bin/anaconda", line 694, in > rescue.runRescue(anaconda) > File "/usr/lib/anaconda/rescue.py", line 272, in runRescue > Anaconda.setMethod() > TypeError: setMethod() takes exactly 2 arguments (1 given) > Install exited abnormally [1/1] > Blaw blaw you may safely reboot your system > > > I am unable to type in the ALT-F2 window at the sh-3.2# prompt. > > I am booting from USB flash drive and loading it over NFS. > > Maybe put a sleep in so that I could look around before it dies? > I am able to type in the ALT-F2 window for a few secs before it dies. > Was able to do ls /usr/lib. > > What can I look at to help figure this out? > > > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list Connected serial console to catch output. This is what I have: Running anaconda, the Fedora Core rescue mode - please wait... /usr/lib/python2.5/site-packages/yum/__init__.py:435: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:40: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:216: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:217: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:169: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:193: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:196: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:200: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:70: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:71: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:74: Warning: 'with' will become a reserved keyword in Python 2.6 Traceback (most recent call last): File "/usr/bin/anaconda", line 694, in rescue.runRescue(anaconda) File "/usr/lib/anaconda/rescue.py", line 272, in runRescue anaconda.setMethod() TypeError: setMethod() takes exactly 2 arguments (1 given) install exited abnormally [1/1] sending termination signals...done sending kill signals...done disabling swap... unmounting filesystems... /mnt/runtime done disabling /dev/loop0 /proc/bus/usb done /proc done /dev/pts done /sys done /tmp/ramfs done /mnt/source done /selinux done you may safely reboot your system From fct-cornette at insight.rr.com Wed Jan 24 04:11:43 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Tue, 23 Jan 2007 23:11:43 -0500 Subject: fc7 Package Updater - uncheck all? In-Reply-To: <002601c73f55$fc4c7e30$020aa8c0@a18> References: <002601c73f55$fc4c7e30$020aa8c0@a18> Message-ID: <45B6DC7F.2040905@insight.rr.com> Jerry Williams wrote: > Is there a way to uncheck all? > I tried shift and select and it does select multiple items, but it only will > uncheck one thing. > > I wanted to first update yum and then do the other updates. > Would be nice to be able to uncheck all or check all. > > If I have missed it please point me to it. > If not I would like to request the feature. > Thanks! > I believe it is activated by highlighting the selection group with the mouse pointer and right clicking the mouse. This should bring up a menu to select or not select packages. Jim -- The less a statesman amounts to, the more he loves the flag. -- Kin Hubbard From jwilliam at xmission.com Wed Jan 24 06:30:13 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Tue, 23 Jan 2007 23:30:13 -0700 Subject: Help fix fc7 rescue. stage2.img In-Reply-To: <002a01c73f62$d909c6f0$020aa8c0@a18> References: <000601c73f17$3d3fd660$020aa8c0@a18> <002a01c73f62$d909c6f0$020aa8c0@a18> Message-ID: <000001c73f81$1ae40270$020aa8c0@a18> > -----Original Message----- > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > bounces at redhat.com] On Behalf Of Jerry Williams > Sent: Tuesday, January 23, 2007 7:54 PM > To: 'For testers of Fedora Core development releases' > Subject: RE: Help fix fc7 rescue. minstg2.img > > > -----Original Message----- > > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > > bounces at redhat.com] On Behalf Of Jerry Williams > > Sent: Tuesday, January 23, 2007 10:52 AM > > To: fedora-test-list at redhat.com > > Subject: Help fix fc7 rescue. minstg2.img > > > > Please help me fix the Fedora 7 rescue image. > > Downloaded the Jan 23 diskboot.img file and I tried it today. > > Something has changed because I no longer see the message about > > libncurses.so.5 in the ALT-F2 window. > > > > ALT-F3 window says: > > INFO : NFS install method detected, will use RHupdates/ > > INFO : Running anaconda script /usr/bin/anaconda > > INFO : using only installclass _Fedora > > INFO : _Fedora in only installclass, using it > > > > Main window says: > > File "/usr/bin/anaconda", line 694, in > > rescue.runRescue(anaconda) > > File "/usr/lib/anaconda/rescue.py", line 272, in runRescue > > Anaconda.setMethod() > > TypeError: setMethod() takes exactly 2 arguments (1 given) > > Install exited abnormally [1/1] > > Blaw blaw you may safely reboot your system > > > > > > I am unable to type in the ALT-F2 window at the sh-3.2# prompt. > > > > I am booting from USB flash drive and loading it over NFS. > > > > Maybe put a sleep in so that I could look around before it dies? > > I am able to type in the ALT-F2 window for a few secs before it dies. > > Was able to do ls /usr/lib. > > > > What can I look at to help figure this out? > > Connected serial console to catch output. > This is what I have: > > Running anaconda, the Fedora Core rescue mode - please wait... > /usr/lib/python2.5/site-packages/yum/__init__.py:435: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/packageSack.py:40: Warning: 'with' > will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/packageSack.py:216: Warning: 'with' > will become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/packageSack.py:217: Warning: 'with' > will become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/repos.py:169: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/repos.py:193: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/repos.py:196: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/repos.py:200: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/yumRepo.py:70: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/yumRepo.py:71: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/yumRepo.py:74: Warning: 'with' will > become a reserved keyword in Python 2.6 > > Traceback (most recent call last): > File "/usr/bin/anaconda", line 694, in > rescue.runRescue(anaconda) > File "/usr/lib/anaconda/rescue.py", line 272, in runRescue > anaconda.setMethod() > TypeError: setMethod() takes exactly 2 arguments (1 given) > install exited abnormally [1/1] > sending termination signals...done > sending kill signals...done > disabling swap... > unmounting filesystems... > /mnt/runtime done > disabling /dev/loop0 > /proc/bus/usb done > /proc done > /dev/pts done > /sys done > /tmp/ramfs done > /mnt/source done > /selinux done > you may safely reboot your system > I was thinking it was using minstg2.img, but turns out that it uses stage2.img I was able to change rescue.py to sleep for 5 min while I looked around. ps -ef shows: /usr/bin/python /usr/bin/anaconda -m nfs://mnt/source/. --noipv6 --rescue df shows: /dev mounted as /dev Nfs-server:/var/export as /mnt/source /tmp/loop0 as /mnt/runtime and has the stage2.img mounted on it. Looks to me like there is some little thing wrong with either anaconda or rescue.py. From pknirsch at redhat.com Wed Jan 24 09:30:38 2007 From: pknirsch at redhat.com (Phil Knirsch) Date: Wed, 24 Jan 2007 10:30:38 +0100 Subject: Fighting the i386 plague In-Reply-To: <20070123170727.GB6693@wolff.to> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> <20070123131139.GB16349@ws-gradcol1.icm.edu.pl> <20070123170727.GB6693@wolff.to> Message-ID: <45B7273E.3020506@redhat.com> Bruno Wolff III wrote: > On Tue, Jan 23, 2007 at 14:11:39 +0100, > Dominik 'Rathann' Mierzejewski wrote: >> If two packages own the same file then it's a bug in packaging! > > If the shared file is the same in both packages, this can be a simpler > solution than creating a whole other package just to contain the one shared > file. > So what you would be suggesting is to create new subpackages for any possible shared data? First of all, this would lead to a huge package inflation, especially because of multilib packages. Also, this would have to be continually monitored for all packages in order to be useful and would be a real packaging nightmare as nearly any file from any package could be shared basically. This is definitely not doable for 2200+ packages in Fedora Core alone. Now add in the 4100+ Extras packages that will get reemerged and you're looking at more than 6300 packages where each package can share a file with another one and each change to each package filelist needs to be tracked and monitored and possibly a new subpackage created. Second of all, i don't think thats the right solution anyway. As has previously been already stated, if 2 packages install the same file i see no reason why during removal it shouldn't be possible to check whether the same file is still "in use" by another package and then it's just not removed. So a useful and simple algorithm already exists, so why not use that. I know file conflict/duplicate checks can be rather expensive computational wise, but even with the current form of the rpmdb it's possible to implement that rather efficiently. Read ya, Phil -- Philipp Knirsch | Tel.: +49-711-96437-470 Development | Fax.: +49-711-96437-111 Red Hat GmbH | Email: Phil Knirsch Hauptstaetterstr. 58 | Web: http://www.redhat.de/ D-70178 Stuttgart Kaa's Law: In any sufficiently large group of people most are idiots. From tmraz at redhat.com Wed Jan 24 10:22:27 2007 From: tmraz at redhat.com (Tomas Mraz) Date: Wed, 24 Jan 2007 11:22:27 +0100 Subject: su (PAM) gotcha In-Reply-To: <9821.1169575064@lwn.net> References: <9821.1169575064@lwn.net> Message-ID: <1169634147.3335.7.camel@perun.kabelta.loc> On Tue, 2007-01-23 at 10:57 -0700, Jonathan Corbet wrote: > In case this is useful to anybody...after yesterday's rawhide update (my > first in a week or two), any attempt to run su would fail with a quick > "incorrect password" message. Before it ever asked for a password. > Even I can't fat-finger something if I don't even get the opportunity to > type. > > A quick look in /etc/pam.d revealed my old "su" file from a few years > back, which I had never changed. There was an "su.rpmnew" file there as > well, dated last July. Switching to the new one made my problem go > away. I've not had the time to figure out just what change made the > difference - the PAM files have clearly evolved considerably over time. The old su config used pam_stack.so which I removed with upgrade to pam-0.99.7.0. Pam_stack was deprecated in FC5 already and its use caused messages in /var/log/secure so you could have noticed that there is something wrong with your setup for a long time ago. -- Tomas Mraz No matter how far down the wrong road you've gone, turn back. Turkish proverb From tmraz at redhat.com Wed Jan 24 10:26:04 2007 From: tmraz at redhat.com (Tomas Mraz) Date: Wed, 24 Jan 2007 11:26:04 +0100 Subject: su (PAM) gotcha In-Reply-To: <200701232034.l0NKYpUd026312@laptop13.inf.utfsm.cl> References: <9821.1169575064@lwn.net> <200701232034.l0NKYpUd026312@laptop13.inf.utfsm.cl> Message-ID: <1169634364.3335.10.camel@perun.kabelta.loc> On Tue, 2007-01-23 at 17:34 -0300, Horst H. von Brand wrote: > Jonathan Corbet wrote: > > In case this is useful to anybody...after yesterday's rawhide update (my > > first in a week or two), any attempt to run su would fail with a quick > > "incorrect password" message. Before it ever asked for a password. > > Even I can't fat-finger something if I don't even get the opportunity to > > type. > > Here I can't login at all to my LDAP handled account (x86_64, > pam-0.99.7.0-2.fc7) (BZ #224048). That's probably different issue and I am currently investigating it. > Yes, I did clean up the *.rpmnew cruft (strangely, all the original and > .rpmnew files cmp(1)ed equal, and had the same permissions). https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=128622 > Besides, pam and authconfig fight over /etc/pam.d/system-auth, one wants it > a file, the other a symlink to system-auth-ac. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=194246 -- Tomas Mraz No matter how far down the wrong road you've gone, turn back. Turkish proverb From buildsys at redhat.com Wed Jan 24 11:36:20 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Wed, 24 Jan 2007 06:36:20 -0500 Subject: rawhide report: 20070124 changes Message-ID: <200701241136.l0OBaK73013924@hs20-bc2-6.build.redhat.com> Updated Packages: a2ps-4.13b-60.fc7 ----------------- * Tue Jan 23 2007 Tim Waugh 4.13b-60 - Force it to build by hacking the configure script. - Don't need rm patch. - Make scriptlets unconditionally succeed (bug #223674). * Fri Oct 27 2006 Tim Waugh - Build requires cups (bug #204119). * Wed Oct 25 2006 Tim Waugh - Make ogonkify build. anaconda-11.2.0.15-1 -------------------- * Tue Jan 23 2007 Jeremy Katz - 11.2.0.15-1 - Remove @everything parsing as promised - Package requirement fixes - Fix kickstart traceback (clumens, #223903) - Add more icons - Don't be too aggressive remaking device nodes - Fix rescue mode avahi-0.6.16-2.fc7 ------------------ * Tue Jan 23 2007 Jeremy Katz - 0.6.16-2 - nuke bogus avahi-sharp -> avahi-devel dep bash-3.2-4.fc7 -------------- * Tue Jan 23 2007 Tim Waugh 3.2-4 - Slightly better .bash_logout (bug #223960). bc-1.06-23 ---------- * Tue Jan 23 2007 Florian La Roche - scripts should never fail: rhbz#223677 * Mon Jan 22 2007 Thomas Woerner 1.06-22 - rebuild for ncurses * Wed Jul 12 2006 Jesse Keating - 1.06-21 - rebuild - add missing br automake bind-31:9.3.3-5.fc7 ------------------- * Tue Jan 23 2007 Adam Tkac 31:9.3.3-5.fc7 - package bind-libbind-devel has been marked as obsolete control-center-1:2.17.90-2.fc7 ------------------------------ * Tue Jan 23 2007 Matthias Clasen - 2.17.90-2 - Install gnomecc desktop file docbook-style-xsl-1.72.0-1.fc7 ------------------------------ * Tue Jan 23 2007 Tim Waugh 1.72.0-1 - 1.72.0. dvgrab-2.1-2.fc7 ---------------- * Tue Jan 23 2007 Jarod Wilson - 2.1-2 - It helps to set DESTDIR if you nuke makeinstall... * Tue Jan 23 2007 Jarod Wilson - 2.1-1 - New upstream release ed-0.4-1 -------- * Tue Jan 23 2007 Karsten Hopp 0.4-1 - new upstream version emacspeak-25-2.fc7 ------------------ * Wed Jan 24 2007 Jens Petersen - 25-2 - fix emacspeak-tcl-pkgreq-tclx.patch for ssh-outloud evolution-sharp-0.12.2-1.fc7 ---------------------------- * Tue Jan 23 2007 Matthew Barnes - 0.12.2-1.fc7 - Update to 0.12.2 guile-5:1.8.1-2.fc7 ------------------- * Tue Jan 23 2007 Miroslav Lichvar - 5:1.8.1-2 - support slib-3a4 - make scriptlets safer (#223701) hdparm-6.9-1 ------------ * Thu Jan 18 2007 Karsten Hopp 6.9-1 - update to 6.9 hwdata-0.195-1 -------------- * Tue Jan 23 2007 Karsten Hopp 0.195-1 - update pci.ids, usb.ids and build for FC-7 * Tue Jan 02 2007 Karsten Hopp 0.193-1 - Update to latest pci.ids/usb.ids for RHEL5 - Resolves: #220182 Add some Dell monitors to MonitorDB irda-utils-0.9.18-1.fc7 ----------------------- * Tue Jan 23 2007 Karsten Hopp 0.9.18-1 - update to 0.9.18 kernel-2.6.19-1.2913.fc7 ------------------------ * Tue Jan 23 2007 Jeremy Katz - temporarily restore START_ARRAY ioctl for mdraid so that we can have mdraid in test1 libtool-1.5.22-8 ---------------- * Mon Jan 22 2007 Karsten Hopp 1.5.22-8 - don't abort (un)install scriptlets when _excludedocs is set (#223708) * Thu Dec 07 2006 Karsten Hopp 1.5.22-7 - update config.guess, config.sub with newer files from automake-1.10 - skip over lines in /etc/ld.so.conf.d/* which don't look like absolute paths (p.e. files from kernel-xen). This avoids having unwanted relative paths in lib_search_path logrotate-3.7.4-11.fc7 ---------------------- * Tue Jan 23 2007 Peter Vrabec 3.7.4-11 - logrotate won't stop if there are some errors in configuration or glob failures (#166510, #182062) mailman-3:2.1.9-4 ----------------- * Tue Jan 23 2007 Florian La Roche - add fix from rhbz#219054: usage output mentions "status" option mgetty-1.1.33-10.fc7 -------------------- * Tue Jan 23 2007 Maros Barabas - 1.1.33-10 - fixed install-info scriptlets (post,preun) - Resolves #223710 nautilus-2.17.90-2.fc7 ---------------------- * Tue Jan 23 2007 Alexander Larsson - 2.17.90-2 - Fix gnome bug #362302 in selinux patch nautilus-sendto-0.8-4.fc7 ------------------------- * Tue Jan 23 2007 Alexander Larsson - 0.8-4 - Rebuild against new gaim (#223765) net-snmp-1:5.4-8.fc7 -------------------- * Tue Jan 23 2007 Radek Vok??l - 5.4-8 - fix occasional segfaults when snmpd starts netatalk-4:2.0.3-9.fc7 ---------------------- * Tue Jan 23 2007 Jindrich Novy - 4:2.0.3-9 - rebuild against new db4 * Mon Dec 04 2006 Maros Barabas - 4:2.0.3-8 - BuildRequires changed from cracklib to cracklib-devel ntp-4.2.4-3.fc7 --------------- * Tue Jan 23 2007 Miroslav Lichvar 4.2.4-3 - disable autoopts option preset mechanisms for ntpd - document -I option of ntpd - generate makewhatis friendly man pages nut-2.0.5-2 ----------- * Tue Jan 23 2007 Karsten Hopp 2.0.5-2 - rename fatal to fatal_with_errno in ipv6 patch - fix filelist * Tue Jan 23 2007 Karsten Hopp 2.0.5-1 - update to 2.0.5 perl-4:5.8.8-11.fc7 ------------------- * Tue Jan 23 2007 Jindrich Novy - 4:5.8.8-11 - rebuild against new db4 - use dist tag * Sat Sep 30 2006 Robin Norwood - 4:5.8.8-10 - bugzilla: 208731 - remove directory support for old perl versions * Fri Sep 15 2006 Robin Norwood - 4:5.8.8-9 - fix bug 204679: add Unicode 5.0.0 support postfix-2:2.3.6-1 ----------------- * Tue Jan 23 2007 Thomas Woerner 2:2.3.6-1 - new version 2.3.6 - limiting SASL mechanisms to plain login for sasl with saslauthd (#175259) - dropped usage of ed in the install stage prctl-1.5-1 ----------- * Tue Jan 23 2007 Karsten Hopp 1.5-1 - update to 1.5 psacct-6.3.2-43.fc7 ------------------- * Tue Jan 23 2007 Ivana Varekova - 6.3.2-43 - Resolves: 223728 psacct logrotate file looks for non existant directory redhat-menus-7.8.9-4.fc7 ------------------------ * Tue Jan 23 2007 Matthias Clasen - 7.8.9-4 - Once more with better categories * Tue Jan 23 2007 Matthias Clasen - 7.8.9-3 - Update preferences.menu for the control center shell rhpxl-0.42-1.fc7 ---------------- * Tue Jan 23 2007 Jeremy Katz - 0.42-1 - Don't pass a potentially bogus fontpath to the X server. It starts fine without it and we don't have it on installs from live cd * Wed Nov 29 2006 Chris Lumens 0.41-1 - Trust kudzu to give us the right video driver instead of using readDrivers to trim the list of what's available (#211977). * Mon Nov 06 2006 Adam Jackson 0.40-1 - Allow for very large resolutions. (#212695) sendmail-8.13.8-4 ----------------- * Tue Jan 23 2007 Florian La Roche - #205803 add sparc/sparc64 to -fPIE list - change sendmail.cf reference into sendmail-cf package name slib-3a4-1.fc7 -------------- * Tue Jan 23 2007 Miroslav Lichvar 3a4-1 - update to 3a4 - make scriptlets safer (#223717) system-config-soundcard-2.0.6-2.fc7 ----------------------------------- * Tue Jan 23 2007 Martin Stransky 2.0.6-2 - fixed #223915 - system-config-soundcard does not start udev-104-1 ---------- * Tue Jan 23 2007 Harald Hoyer - 104-1 - version 104 - merged changes from RHEL units-1.86-2.fc7 ---------------- * Tue Jan 23 2007 Florian La Roche - 1.86-2 - rhbz#220533 vim-2:7.0.188-3 --------------- * Tue Jan 23 2007 Karsten Hopp 7.0.188-3 - patchlevel 188 xen-3.0.4-3.fc7 --------------- * Tue Jan 23 2007 Daniel Berrange - 3.0.4-3.fc7 - Added PVFB back compat for FC5/6 guests * Mon Jan 22 2007 Daniel P. Berrange - 3.0.4-2.fc7 - Ensure the arch-x86 header files are included in xen-devel package - Bring back patch to move /var/xen/dump to /var/lib/xen/dump - Make /var/log/xen mode 0700 * Thu Jan 11 2007 Daniel P. Berrange - 3.0.4-1 - Upgrade to official xen-3.0.4_1 release tarball xorg-x11-resutils-7.1-3.fc7 --------------------------- * Tue Jan 23 2007 Adam Jackson 7.1-3 - appres 1.0.1 xorg-x11-server-1.2.0-1.fc7 --------------------------- * Tue Jan 23 2007 Adam Jackson 1.2.0-1 - Xorg server 1.2.0. Broken deps for ppc64 ---------------------------------------------------------- perl-suidperl - 4:5.8.8-11.fc7.ppc64 requires perl = 4:5.8.8-11 Broken deps for i386 ---------------------------------------------------------- perl-suidperl - 4:5.8.8-11.fc7.i386 requires perl = 4:5.8.8-11 Broken deps for s390 ---------------------------------------------------------- perl-suidperl - 4:5.8.8-11.fc7.s390 requires perl = 4:5.8.8-11 systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 Broken deps for x86_64 ---------------------------------------------------------- perl-suidperl - 4:5.8.8-11.fc7.x86_64 requires perl = 4:5.8.8-11 Broken deps for ppc ---------------------------------------------------------- perl-suidperl - 4:5.8.8-11.fc7.ppc requires perl = 4:5.8.8-11 Broken deps for ia64 ---------------------------------------------------------- perl-suidperl - 4:5.8.8-11.fc7.ia64 requires perl = 4:5.8.8-11 Broken deps for s390x ---------------------------------------------------------- perl-suidperl - 4:5.8.8-11.fc7.s390x requires perl = 4:5.8.8-11 From D.Mierzejewski at icm.edu.pl Wed Jan 24 12:12:47 2007 From: D.Mierzejewski at icm.edu.pl (Dominik 'Rathann' Mierzejewski) Date: Wed, 24 Jan 2007 13:12:47 +0100 Subject: Fighting the i386 plague In-Reply-To: <200701231123.36145.jkeating@redhat.com> References: <975.1169500184@lwn.net> <200701230826.22696.jkeating@redhat.com> <20070123132907.GE16349@ws-gradcol1.icm.edu.pl> <200701231123.36145.jkeating@redhat.com> Message-ID: <20070124121246.GA14810@ws-gradcol1.icm.edu.pl> On Tue, Jan 23, 2007 at 11:23:27AM -0500, Jesse Keating wrote: > On Tuesday 23 January 2007 08:29, Dominik 'Rathann' Mierzejewski wrote: > > There's no reason that they should. With careful packaging it's possible > > to have libraries (i.e. the only binaries that need to be multilib'd) > > in separate packages. > > So lets see some sustainable examples. OpenIPMI (this one has packaging bugs, like .pc file(s) in -libs), audit, bind, file and so on. Curiously enough, all of these have static libs packaged in -devel, which - according to current packaging guidelines - is a review blocker. Regards, -- Dominik 'Rathann' Mierzejewski Interdisciplinary Centre for Mathematical and Computational Modelling Warsaw University | http://www.icm.edu.pl | tel. +48 (22) 5540810 From dtimms at iinet.net.au Wed Jan 24 13:16:42 2007 From: dtimms at iinet.net.au (David Timms) Date: Thu, 25 Jan 2007 00:16:42 +1100 Subject: fc7 Package Updater - uncheck all? In-Reply-To: <45B6DC7F.2040905@insight.rr.com> References: <002601c73f55$fc4c7e30$020aa8c0@a18> <45B6DC7F.2040905@insight.rr.com> Message-ID: <45B75C3A.7040406@iinet.net.au> Jim Cornette wrote: > Jerry Williams wrote: >> Is there a way to uncheck all? >> I tried shift and select and it does select multiple items, but it >> only will >> uncheck one thing. >> >> I wanted to first update yum and then do the other updates. >> Would be nice to be able to uncheck all or check all. >> >> If I have missed it please point me to it. >> If not I would like to request the feature. >> Thanks! >> > > I believe it is activated by highlighting the selection group with the > mouse pointer and right clicking the mouse. This should bring up a menu > to select or not select packages. select 1 package. ctrl-a right-click uncheck selected select the one you want DaveT. From jkeating at redhat.com Wed Jan 24 13:26:53 2007 From: jkeating at redhat.com (Jesse Keating) Date: Wed, 24 Jan 2007 08:26:53 -0500 Subject: Fighting the i386 plague In-Reply-To: <20070124121246.GA14810@ws-gradcol1.icm.edu.pl> References: <975.1169500184@lwn.net> <200701231123.36145.jkeating@redhat.com> <20070124121246.GA14810@ws-gradcol1.icm.edu.pl> Message-ID: <200701240826.53407.jkeating@redhat.com> On Wednesday 24 January 2007 07:12, Dominik 'Rathann' Mierzejewski wrote: > > So lets see some sustainable examples. > > OpenIPMI (this one has packaging bugs, like .pc file(s) in -libs), > audit, bind, file and so on. Curiously enough, all of these have > static libs packaged in -devel, which - according to current packaging > guidelines - is a review blocker. I just don't think creating 2K -libs packages or -docs packages is the more sustainable solution. Fixing the rpm bug seems more appropriate. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From D.Mierzejewski at icm.edu.pl Wed Jan 24 13:42:59 2007 From: D.Mierzejewski at icm.edu.pl (Dominik 'Rathann' Mierzejewski) Date: Wed, 24 Jan 2007 14:42:59 +0100 Subject: Fighting the i386 plague In-Reply-To: <200701240826.53407.jkeating@redhat.com> References: <975.1169500184@lwn.net> <200701231123.36145.jkeating@redhat.com> <20070124121246.GA14810@ws-gradcol1.icm.edu.pl> <200701240826.53407.jkeating@redhat.com> Message-ID: <20070124134258.GB14810@ws-gradcol1.icm.edu.pl> On Wed, Jan 24, 2007 at 08:26:53AM -0500, Jesse Keating wrote: > On Wednesday 24 January 2007 07:12, Dominik 'Rathann' Mierzejewski wrote: > > > So lets see some sustainable examples. > > > > OpenIPMI (this one has packaging bugs, like .pc file(s) in -libs), > > audit, bind, file and so on. Curiously enough, all of these have > > static libs packaged in -devel, which - according to current packaging > > guidelines - is a review blocker. > > I just don't think creating 2K -libs packages or -docs packages is the more > sustainable solution. Yes it doesn't seem viable to do it for all of them. Still, it's necessary to do it for some. > Fixing the rpm bug seems more appropriate. It's not really a bug. It's a side effect of multilib that requires special treatment. The trick is to implement this in rpm effectively. Regards, -- Dominik 'Rathann' Mierzejewski Interdisciplinary Centre for Mathematical and Computational Modelling Warsaw University | http://www.icm.edu.pl | tel. +48 (22) 5540810 From jkeating at redhat.com Wed Jan 24 14:19:08 2007 From: jkeating at redhat.com (Jesse Keating) Date: Wed, 24 Jan 2007 09:19:08 -0500 Subject: Fighting the i386 plague In-Reply-To: <20070124134258.GB14810@ws-gradcol1.icm.edu.pl> References: <975.1169500184@lwn.net> <200701240826.53407.jkeating@redhat.com> <20070124134258.GB14810@ws-gradcol1.icm.edu.pl> Message-ID: <200701240919.09070.jkeating@redhat.com> On Wednesday 24 January 2007 08:42, Dominik 'Rathann' Mierzejewski wrote: > It's not really a bug. It's a side effect of multilib that requires special > treatment. The trick is to implement this in rpm effectively. But there is an actual bug in rpm taking away files that also belong to another multilib package. You're right, it is necessary for some to split -libs out, mostly because development of said app never took into account multilib and far too many things would clash (different content in the files between the arches for common directories) -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From katzj at redhat.com Wed Jan 24 14:31:47 2007 From: katzj at redhat.com (Jeremy Katz) Date: Wed, 24 Jan 2007 09:31:47 -0500 Subject: Help fix fc7 rescue. minstg2.img In-Reply-To: <000601c73f17$3d3fd660$020aa8c0@a18> References: <000601c73f17$3d3fd660$020aa8c0@a18> Message-ID: <1169649107.2747.2.camel@aglarond.local> On Tue, 2007-01-23 at 10:52 -0700, Jerry Williams wrote: > Please help me fix the Fedora 7 rescue image. [snip] > TypeError: setMethod() takes exactly 2 arguments (1 given) > Install exited abnormally [1/1] Thanks for the heads-up; I fixed this yesterday afternoon so today's rawhide push should have the fix Jeremy From D.Mierzejewski at icm.edu.pl Wed Jan 24 16:52:25 2007 From: D.Mierzejewski at icm.edu.pl (Dominik 'Rathann' Mierzejewski) Date: Wed, 24 Jan 2007 17:52:25 +0100 Subject: Fighting the i386 plague In-Reply-To: <200701240919.09070.jkeating@redhat.com> References: <975.1169500184@lwn.net> <200701240826.53407.jkeating@redhat.com> <20070124134258.GB14810@ws-gradcol1.icm.edu.pl> <200701240919.09070.jkeating@redhat.com> Message-ID: <20070124165225.GF14810@ws-gradcol1.icm.edu.pl> On Wed, Jan 24, 2007 at 09:19:08AM -0500, Jesse Keating wrote: > On Wednesday 24 January 2007 08:42, Dominik 'Rathann' Mierzejewski wrote: > > It's not really a bug. It's a side effect of multilib that requires special > > treatment. The trick is to implement this in rpm effectively. > > But there is an actual bug in rpm taking away files that also belong to > another multilib package. Right. > You're right, it is necessary for some to split -libs out, mostly because > development of said app never took into account multilib and far too many > things would clash (different content in the files between the arches for > common directories) Or because the x86 version is faster due to assembly-optimized code. For example lame. Regards, -- Dominik 'Rathann' Mierzejewski Interdisciplinary Centre for Mathematical and Computational Modelling Warsaw University | http://www.icm.edu.pl | tel. +48 (22) 5540810 From jwilliam at xmission.com Wed Jan 24 16:54:56 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Wed, 24 Jan 2007 09:54:56 -0700 Subject: Help fix fc7 rescue. minstg2.img In-Reply-To: <1169649107.2747.2.camel@aglarond.local> References: <000601c73f17$3d3fd660$020aa8c0@a18> <1169649107.2747.2.camel@aglarond.local> Message-ID: <003301c73fd8$60d2c4e0$020aa8c0@a18> Well it works now if you don't try and have it find and mount the disk. Greetings. anaconda installer init version 11.2.0.15 starting It you select continue you get this: File "/usr/bin/anaconda", line 694, in rescue.runRescue(anaconda) File "/usr/lib/anaconda/rescue.py", line 296, in runRescue disks = upgrade.findExistingRoots(anaconda, upgradeany = 1) File "/usr/lib/anaconda/upgrade.py", line 97, in findExistingRoots rootparts = anaconda.id.diskset.findExistingRootPartitions(upgradeany = upgradeany) File "/usr/lib/anaconda/partedUtils.py", line 795, in findExistingRootPartitions protected = self.anaconda.method.protectedPartitions() AttributeError: 'NoneType' object has no attribute 'protectedPartitions' install exited abnormally [1/1] It you select readonly you get this: Traceback (most recent call last): File "/usr/bin/anaconda", line 694, in rescue.runRescue(anaconda) File "/usr/lib/anaconda/rescue.py", line 296, in runRescue disks = upgrade.findExistingRoots(anaconda, upgradeany = 1) File "/usr/lib/anaconda/upgrade.py", line 97, in findExistingRoots rootparts = anaconda.id.diskset.findExistingRootPartitions(upgradeany = upgradeany) File "/usr/lib/anaconda/partedUtils.py", line 795, in findExistingRootPartitions protected = self.anaconda.method.protectedPartitions() AttributeError: 'NoneType' object has no attribute 'protectedPartitions' install exited abnormally [1/1] Looks like the same thing for read only. Skip works great now! Thanks! I also never see the Keyboard Type but have to hit enter a few times when I have set console=ttyS0,9600n8 and I see this message: SysRq : HELP : loglevel0-8 reBoot Crashdump show-all-locks(D) tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount showBlockedTasks So to restate what I see, I see the screen with "Choose a Language" hit enter, strange message, hit enter, hit enter, see "Rescue Method". Not sure if this is normal or not because you probably aren't going to care about the keyboard if you are using a serial connection, but then I would think that you shouldn't have to hit enter 2 time either. Not sure if you saw this or not either: Running anaconda, the Fedora Core rescue mode - please wait... /usr/lib/python2.5/site-packages/yum/__init__.py:435: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:40: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:216: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:217: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:169: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:193: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:196: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:200: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:70: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:71: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:74: Warning: 'with' will become a reserved keyword in Python 2.6 > -----Original Message----- > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > bounces at redhat.com] On Behalf Of Jeremy Katz > Sent: Wednesday, January 24, 2007 7:32 AM > To: For testers of Fedora Core development releases > Subject: Re: Help fix fc7 rescue. minstg2.img > > On Tue, 2007-01-23 at 10:52 -0700, Jerry Williams wrote: > > Please help me fix the Fedora 7 rescue image. > [snip] > > TypeError: setMethod() takes exactly 2 arguments (1 given) > > Install exited abnormally [1/1] > > Thanks for the heads-up; I fixed this yesterday afternoon so today's > rawhide push should have the fix > > Jeremy > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list From jwilliam at xmission.com Wed Jan 24 17:06:40 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Wed, 24 Jan 2007 10:06:40 -0700 Subject: View Updates - Wait.....-Apply Updates Message-ID: <003401c73fda$03d26910$020aa8c0@a18> See little window pop up. 52 updates... Only button is "View Updates", click it, wait...... See screen, click "Apply Updates" Would it be possible to have 2 buttons "Apply Updates" and "View Updates"? That way I can click "Apply Updates" and not have to wait to just click another button. Yes, most of the time I do like to look, but what if I have several machines that all need the same thing? From jwilliam at xmission.com Wed Jan 24 17:12:20 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Wed, 24 Jan 2007 10:12:20 -0700 Subject: View Updates - Wait.....-Apply Updates In-Reply-To: <003401c73fda$03d26910$020aa8c0@a18> References: <003401c73fda$03d26910$020aa8c0@a18> Message-ID: <003501c73fda$cf083330$020aa8c0@a18> > -----Original Message----- > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > bounces at redhat.com] On Behalf Of Jerry Williams > Sent: Wednesday, January 24, 2007 10:07 AM > To: fedora-test-list at redhat.com > Subject: View Updates - Wait.....-Apply Updates > > See little window pop up. 52 updates... > Only button is "View Updates", click it, wait...... > See screen, click "Apply Updates" > > Would it be possible to have 2 buttons "Apply Updates" and "View Updates"? > That way I can click "Apply Updates" and not have to wait to just click > another button. > > Yes, most of the time I do like to look, but what if I have several > machines > that all need the same thing? > One more thing, on some machines, I can't just do the update, I have to wait until after hours. But it is nice to have the updates downloaded before hand. So I can just do the install and not have to wait for the download. People want their machine back and only let you have it for a little while. So maybe a checkbox on the main Package Updater screen that says download only. From bruno at wolff.to Wed Jan 24 19:49:55 2007 From: bruno at wolff.to (Bruno Wolff III) Date: Wed, 24 Jan 2007 13:49:55 -0600 Subject: Fighting the i386 plague In-Reply-To: <45B7273E.3020506@redhat.com> References: <975.1169500184@lwn.net> <200701221620.48965.jkeating@redhat.com> <1169501353.32400.6.camel@dawkins> <20070123131139.GB16349@ws-gradcol1.icm.edu.pl> <20070123170727.GB6693@wolff.to> <45B7273E.3020506@redhat.com> Message-ID: <20070124194955.GA10820@wolff.to> On Wed, Jan 24, 2007 at 10:30:38 +0100, Phil Knirsch wrote: > Bruno Wolff III wrote: > >On Tue, Jan 23, 2007 at 14:11:39 +0100, > > Dominik 'Rathann' Mierzejewski wrote: > >>If two packages own the same file then it's a bug in packaging! > > > >If the shared file is the same in both packages, this can be a simpler > >solution than creating a whole other package just to contain the one shared > >file. > > > > So what you would be suggesting is to create new subpackages for any > possible shared data? No, I was explaining to the person I was replying to that this was an alternative approach. And that there were reasons you might not want to do this. From wwoods at redhat.com Wed Jan 24 20:42:17 2007 From: wwoods at redhat.com (Will Woods) Date: Wed, 24 Jan 2007 15:42:17 -0500 Subject: QA Meeting reminder: 1600UTC, Thursday Jan. 25 Message-ID: <1169671337.26926.12.camel@metroid.rdu.redhat.com> This is your reminder that we'll be holding a QA Meeting in #fedora-qa at 1600UTC (11AM EST) on Thursday, Jan. 25. Yeah, that's tomorrow. It was in the meeting notes, but I didn't send an announcement to the list about it. I swear I will get better about this. Anyway, as usual, the meeting agenda will be posted on the wiki: http://fedoraproject.org/wiki/QA/Meetings/20070125 Here's a quick summary: 1. Test1 is frozen! - What's going to be released? - What do we need to test? - How is testing going? - How can we make reporting testing results easier (or clearer)? 2. RHTS update - hosting.fedoraproject.org code repository (poelstra) - status of tools If there's anything else you'd like to discuss, just let me know. Hope to see you there! -w -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From grejigl-gnomeprevod at yahoo.ca Wed Jan 24 19:44:45 2007 From: grejigl-gnomeprevod at yahoo.ca (=?windows-1252?B?SWdvciBNaWxldGnEhw==?=) Date: Wed, 24 Jan 2007 11:44:45 -0800 (PST) Subject: sata_promise.c patch from libata-dev.git#upstream Message-ID: <81117.34837.qm@web38814.mail.mud.yahoo.com> On Mon January 22 2007 22:01, Jim Bevier wrote: > Dave, > > Here is the pata drive on sata_promise controller patch. It is the one > that will someday find its way into 2.6.21. Until then, please include > this patch in the kernel build to provide pata drive support. I would be > most thankful. >+1 me too, pretty please with knobs on or before test1 freeze, did I say >please? ok add some shiny bits :-) +1 here too. Igor -------------- next part -------------- An HTML attachment was scrubbed... URL: From dr.diesel at gmail.com Thu Jan 25 00:40:08 2007 From: dr.diesel at gmail.com (Dr. Diesel) Date: Wed, 24 Jan 2007 19:40:08 -0500 Subject: +1 vote Message-ID: <2a28d2ab0701241640h5fc501a3pf0d1dfd3815afde1@mail.gmail.com> For the old Preferences and Administration menus! New control panel reminds me of Suse, yuck! From miles.lane at gmail.com Thu Jan 25 01:00:45 2007 From: miles.lane at gmail.com (Miles Lane) Date: Wed, 24 Jan 2007 17:00:45 -0800 Subject: +1 vote In-Reply-To: <2a28d2ab0701241640h5fc501a3pf0d1dfd3815afde1@mail.gmail.com> References: <2a28d2ab0701241640h5fc501a3pf0d1dfd3815afde1@mail.gmail.com> Message-ID: On 1/24/07, Dr. Diesel wrote: > > For the old Preferences and Administration menus! New control panel > reminds me of Suse, yuck! Hmm. The new control panel seems more reminiscent of Windows, and that's okay with me. KDE's preferences sprawl is vast and convoluted. The new Gnome control panel seems pretty tame by comparison. It basically is just putting stuff that was in the preferences menu hierarchy and sticking it into a browsing window. I don't see the harm there. Of course, these sort of issues tend to bring out a lot of strong and differing opinions. That's probably why the Windows control panel can be displayed in a variety of layouts XP version, and "classic" (list, icons, details). Miles -------------- next part -------------- An HTML attachment was scrubbed... URL: From buildsys at redhat.com Thu Jan 25 11:10:07 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Thu, 25 Jan 2007 06:10:07 -0500 Subject: rawhide report: 20070125 changes Message-ID: <200701251110.l0PBA7BR023156@hs20-bc2-6.build.redhat.com> New package kernel-xen-2.6 The Linux kernel (the core of the Linux operating system) Updated Packages: anaconda-11.2.0.17-1 -------------------- * Wed Jan 24 2007 Jeremy Katz - 11.2.0.17-1 - Disable extra repo for now * Wed Jan 24 2007 Jeremy Katz - 11.2.0.16-1 - Fix rescue mode - Fix theming dbus-python-0.80.1-1.fc7 ------------------------ * Wed Jan 24 2007 John (J5) Palmieri - 0.80.1-1 - upgrade to 0.80.1 - remove dependency on Pyrex and libxml2 - some API breakage, please see http://dbus.freedesktop.org/doc/dbus-python/NEWS.html for notes on changes emacs-22.0.93-3.fc7 ------------------- * Wed Jan 24 2007 Chip Coldwell - 22.0.93-3 - po-mode.el was being left out * Tue Jan 23 2007 Chip Coldwell - 22.0.93-1 - new pretest version - removed setarch since new dumper copes with execshield - clean up site initialization files (varions #176171) * Tue Jan 02 2007 Chip Coldwell - 22.0.92-1 - new pretest version - removed almost all emacs 21 patches from emacs 22 - clean up spec file, - many new BuildRequires (David Woodhouse #221250) fedora-release-6.90-1 --------------------- * Wed Jan 24 2007 Jeremy Katz - 6.90-1 - Bump to 6.90. Keep working with older release notes firstboot-1.4.29-1.fc7 ---------------------- * Wed Jan 24 2007 Chris Lumens 1.4.29-1 - Fix disabling the soundcard panel if no soundcard are available (#221177). - Remove the display module and the dependency on system-config-display. gnome-spell-1.0.7-4.fc7 ----------------------- * Wed Jan 24 2007 Matthew Barnes - 1.0.7-4.fc7 - Clean up spec file, remove unused patches. - Revise multilib patch so that we no longer have to run the autotools before building (RH bug #224160). gstreamer-plugins-good-0.10.5-2.fc7 ----------------------------------- * Wed Jan 24 2007 Adam Jackson - 0.10.5-2 - Re-add the gdkpixbuf loader. (#222837) libgnomekbd-2.17.2-2.fc7 ------------------------ * Wed Jan 24 2007 Matthias Clasen - 2.17.2-2 - Port former control-center patches to improve keyboard drawing pam-0.99.7.1-1.fc7 ------------------ * Wed Jan 24 2007 Tomas Mraz 0.99.7.1-1 - upgrade to new upstream version resolving CVE-2007-0003 - pam_namespace: unmount poly dir for override users * Mon Jan 22 2007 Tomas Mraz 0.99.7.0-2 - add back min salt length requirement which was erroneously removed upstream (CVE-2007-0003) * Fri Jan 19 2007 Tomas Mraz 0.99.7.0-1 - upgrade to new upstream version - drop pam_stack module as it is obsolete - some changes to silence rpmlint perl-4:5.8.8-12.fc7 ------------------- * Wed Jan 24 2007 Jindrich Novy - 4:5.8.8-12 - put dist tag directly to perlrel to fix dependency to suidperl * Tue Jan 23 2007 Jindrich Novy - 4:5.8.8-11 - rebuild against new db4 - use dist tag * Sat Sep 30 2006 Robin Norwood - 4:5.8.8-10 - bugzilla: 208731 - remove directory support for old perl versions pm-utils-0.19.1-4.fc7 --------------------- * Wed Jan 24 2007 Phil Knirsch - 0.19.1-4 - Start/stop correct services in 10NetworkManager hook (#215253) - Fixed check for /sys/power/disk and /sys/power/state (#214407) - Added proper error messages in case /sys/power/disk or /sys/power/state are missing (#215386) - Removed service calls and module load/unload for bluetooth hook (#213387) - Added hook file to restore the sysfont after resume (#215391) - Added the possibility to disable hibernate and suspend completely via the config file (#216459) - Symlinked the config file to /etc/sysconfig/power-management (#216459) - Fixed pm-powersave permission check bug (#222819) - Small specfile cleanups * Sun Oct 01 2006 Peter Jones - 0.19.1-3 - Disable bluetooth suspend/reusme hook by default; the kernel modules seem to support this correctly these days. * Thu Sep 28 2006 Peter Jones - 0.19.1-2 - Ignore emacs backup files in config directories (#185979) policycoreutils-1.34.1-3.fc7 ---------------------------- * Wed Jan 24 2007 Dan Walsh 1.34.1-3 - More chcat fixes * Wed Jan 24 2007 Dan Walsh 1.34.1-2 - Change chcat to exec semodule so file context is maintained * Wed Jan 24 2007 Dan Walsh 1.34.1-1 - Fix system-config-selinux ports view - Update to upstream * Fixed newrole non-pam build. * Updated version for stable branch. selinux-policy-2.5.1-5.fc7 -------------------------- * Mon Jan 22 2007 Dan Walsh 2.5.1-5 - Continue fixing, additional user domains xorg-x11-drv-vesa-1.3.0-2.fc7 ----------------------------- * Wed Jan 24 2007 Adam Jackson 1.3.0-2 - vesa-1.2.1-validmode.patch: Strictly limit runtime modes to the intersection of the BIOS and DDC lists, if a DDC list exists; fixes cases where we'd choose 1600x1200 on 1680x1050 panel. Conversely, be more forgiving when validating the resulting set against the sync ranges; fixes 640x480 syndrome when the monitor has broken DDC. Don't be deceived though, vesa still sucks. Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From dtimms at iinet.net.au Thu Jan 25 12:30:34 2007 From: dtimms at iinet.net.au (David Timms) Date: Thu, 25 Jan 2007 23:30:34 +1100 Subject: View Updates - Wait.....-Apply Updates In-Reply-To: <003501c73fda$cf083330$020aa8c0@a18> References: <003401c73fda$03d26910$020aa8c0@a18> <003501c73fda$cf083330$020aa8c0@a18> Message-ID: <45B8A2EA.5070205@iinet.net.au> Jerry Williams wrote: >> -----Original Message----- >> From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- >> bounces at redhat.com] On Behalf Of Jerry Williams >> Sent: Wednesday, January 24, 2007 10:07 AM >> To: fedora-test-list at redhat.com >> Subject: View Updates - Wait.....-Apply Updates >> >> See little window pop up. 52 updates... >> Only button is "View Updates", click it, wait...... >> See screen, click "Apply Updates" >> >> Would it be possible to have 2 buttons "Apply Updates" and "View Updates"? >> That way I can click "Apply Updates" and not have to wait to just click >> another button. >> >> Yes, most of the time I do like to look, but what if I have several >> machines >> that all need the same thing? >> > One more thing, on some machines, I can't just do the update, I have to wait > until after hours. But it is nice to have the updates downloaded before > hand. So I can just do the install and not have to wait for the download. > People want their machine back and only let you have it for a little while. > So maybe a checkbox on the main Package Updater screen that says download > only. Obviously, there is no reason why it wouldn't be possible {eg equivalent to the yum -y option}; it's open source after all. But perhaps yum-updatesd already implements what you are after ;) $ man yum-updatesd.conf I go a different route: one internal machine gets updated manually {after visually approving updates}, and testing for a few days, then createrepo is used to build a custom internal repo. The rest of the machines autoupdate from the internal repos: there are no external repos set. I think it is a good to manage what to update, and also internally cache the rpm etc. DaveT. From dr.diesel at gmail.com Thu Jan 25 12:37:15 2007 From: dr.diesel at gmail.com (Dr. Diesel) Date: Thu, 25 Jan 2007 06:37:15 -0600 Subject: +1 vote In-Reply-To: References: <2a28d2ab0701241640h5fc501a3pf0d1dfd3815afde1@mail.gmail.com> Message-ID: <2a28d2ab0701250437y3da5df55q6ae708cceb05bf08@mail.gmail.com> The menu based system was cleaner, faster, required less movement and clicking of the mouse! A choice in behavior would be most excellent! I dig the new icons though...... On 1/24/07, Miles Lane wrote: > On 1/24/07, Dr. Diesel wrote: > > For the old Preferences and Administration menus! New control panel > > reminds me of Suse, yuck! > > Hmm. > > The new control panel seems more reminiscent of Windows, and that's okay > with me. KDE's preferences sprawl is vast and convoluted. The new Gnome > control panel seems pretty tame by comparison. It basically is just putting > stuff that was in the preferences menu hierarchy and sticking it into a > browsing window. I don't see the harm there. Of course, these sort of > issues tend to bring out a lot of strong and differing opinions. That's > probably why the Windows control panel can be displayed in a variety of > layouts XP version, and "classic" (list, icons, details). > > Miles > > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list > > From vonbrand at inf.utfsm.cl Thu Jan 25 12:59:43 2007 From: vonbrand at inf.utfsm.cl (Horst H. von Brand) Date: Thu, 25 Jan 2007 09:59:43 -0300 Subject: Gnome configuration [Was: Re: +1 vote] In-Reply-To: <2a28d2ab0701250437y3da5df55q6ae708cceb05bf08@mail.gmail.com> References: <2a28d2ab0701241640h5fc501a3pf0d1dfd3815afde1@mail.gmail.com> <2a28d2ab0701250437y3da5df55q6ae708cceb05bf08@mail.gmail.com> Message-ID: <200701251259.l0PCxhTK014125@laptop13.inf.utfsm.cl> Dr. Diesel wrote: > On 1/24/07, Miles Lane wrote: > > On 1/24/07, Dr. Diesel wrote: > > > For the old Preferences and Administration menus! New control panel > > > reminds me of Suse, yuck! > > > > Hmm. > > > > The new control panel seems more reminiscent of Windows, and that's okay > > with me. KDE's preferences sprawl is vast and convoluted. The new Gnome > > control panel seems pretty tame by comparison. It basically is just putting > > stuff that was in the preferences menu hierarchy and sticking it into a > > browsing window. I don't see the harm there. Of course, these sort of > > issues tend to bring out a lot of strong and differing opinions. That's > > probably why the Windows control panel can be displayed in a variety of > > layouts XP version, and "classic" (list, icons, details). > The menu based system was cleaner, faster, required less movement and > clicking of the mouse! Yes, it is annoying to wait out the launch of yet another large application just to tweak something. A definite regressin in my book. -- Dr. Horst H. von Brand User #22616 counter.li.org Departamento de Informatica Fono: +56 32 2654431 Universidad Tecnica Federico Santa Maria +56 32 2654239 Casilla 110-V, Valparaiso, Chile Fax: +56 32 2797513 From mclasen at redhat.com Thu Jan 25 13:17:02 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Thu, 25 Jan 2007 08:17:02 -0500 Subject: +1 vote In-Reply-To: <2a28d2ab0701250437y3da5df55q6ae708cceb05bf08@mail.gmail.com> References: <2a28d2ab0701241640h5fc501a3pf0d1dfd3815afde1@mail.gmail.com> <2a28d2ab0701250437y3da5df55q6ae708cceb05bf08@mail.gmail.com> Message-ID: <1169731022.3289.2.camel@dhcp83-33.boston.redhat.com> On Thu, 2007-01-25 at 06:37 -0600, Dr. Diesel wrote: > The menu based system was cleaner, faster, required less movement and > clicking of the mouse! A choice in behavior would be most excellent! > We are working on reenabling the old menus again. The code to support customizable menus was dropped from the 2.17.90 panel, but it will hopefully be back soon... Matthias From mike at miketc.com Thu Jan 25 14:37:36 2007 From: mike at miketc.com (Mike Chambers) Date: Thu, 25 Jan 2007 08:37:36 -0600 Subject: Evolution crashes Message-ID: <1169735856.9042.2.camel@scrappy.miketc.com> Is anyone running current rawhide version of evolution experiencing crashes in the program, when clicking on an email in preview pane without even opening it? I can't tell what might be causing it, as it's even from other users on the fedora lists, that I am sure are using linux and text type formatting. [mike at scrappy ~]$ rpm -qa |grep evolution evolution-2.9.5-2.fc7 evolution-data-server-1.9.5-3.fc7 -- Mike Chambers Madisonville, KY "Sex is like air, it's not important unless your not getting any!" From caolanm at redhat.com Thu Jan 25 14:58:27 2007 From: caolanm at redhat.com (Caolan McNamara) Date: Thu, 25 Jan 2007 14:58:27 +0000 Subject: Evolution crashes In-Reply-To: <1169735856.9042.2.camel@scrappy.miketc.com> References: <1169735856.9042.2.camel@scrappy.miketc.com> Message-ID: <1169737108.853.8.camel@soulcrusher.caolan.org> On Thu, 2007-01-25 at 08:37 -0600, Mike Chambers wrote: > Is anyone running current rawhide version of evolution experiencing > crashes in the program, when clicking on an email in preview pane > without even opening it? > > I can't tell what might be causing it, as it's even from other users on > the fedora lists, that I am sure are using linux and text type > formatting. > > [mike at scrappy ~]$ rpm -qa |grep evolution > evolution-2.9.5-2.fc7 > evolution-data-server-1.9.5-3.fc7 No idea. A backtrace from gdb might help track it down. But any chance that there's a connection to gpg signed mails ? Or a connection to having "group by threads" on ? C. From mike at miketc.com Thu Jan 25 15:02:46 2007 From: mike at miketc.com (Mike Chambers) Date: Thu, 25 Jan 2007 09:02:46 -0600 Subject: Evolution crashes In-Reply-To: <1169737108.853.8.camel@soulcrusher.caolan.org> References: <1169735856.9042.2.camel@scrappy.miketc.com> <1169737108.853.8.camel@soulcrusher.caolan.org> Message-ID: <1169737367.9259.14.camel@scrappy.miketc.com> On Thu, 2007-01-25 at 14:58 +0000, Caolan McNamara wrote: > On Thu, 2007-01-25 at 08:37 -0600, Mike Chambers wrote: > > Is anyone running current rawhide version of evolution experiencing > > crashes in the program, when clicking on an email in preview pane > > without even opening it? > > > > I can't tell what might be causing it, as it's even from other users on > > the fedora lists, that I am sure are using linux and text type > > formatting. > > > > [mike at scrappy ~]$ rpm -qa |grep evolution > > evolution-2.9.5-2.fc7 > > evolution-data-server-1.9.5-3.fc7 > > No idea. A backtrace from gdb might help track it down. > > But any chance that there's a connection to gpg signed mails ? > Or a connection to having "group by threads" on ? Well, it's put it this way. I click on an email, it tries to use bug-buddy, then I cancel and it exits. I then open back up evolution, click on the same folder, same email and it works *shrug*. One other thing along with what I just wrote. Is that if it crashes, and when I go to open it back up, letting it stay highlighted on the same folder as when it crashed, and if I go ahead and delete the rest of the emails, the folder still shows the same # of emails as it had before the crash. I have to click off of it, then back on it again to get the number of unread msgs to disappear. Ok, there is one thing that I do on new installs on this computer. I was running FC6 + upgrades. I saved my /home/usr/.evolution (and /home/usr/.gconf/apps/evolution) folder. Once i reinstalled FC6, I then updated to rawhide. I then copied my .evolution folder back over before running it the first time. I will create a test user with same email addy to see if it still crashes or not, unless someone else is experiencing same thing. Guess I am not wanting to recreate my folders, filters and such from scratch unless I have to. -- Mike Chambers Madisonville, KY "Sex is like air, it's not important unless your not getting any!" From lwn-ft at lwn.net Thu Jan 25 16:00:40 2007 From: lwn-ft at lwn.net (Jonathan Corbet) Date: Thu, 25 Jan 2007 09:00:40 -0700 Subject: emacs 22 Message-ID: <32449.1169740840@lwn.net> Interesting...today's update brought in the emacs 22 pretest snapshot. This is OK with me - I've been building my own version for a little bit now. But I do find it curious, given that emacs 22 final before the Fedora 7 release seems, um, unlikely. There are certain things in emacs 22 (gnus being the main example) which do not go back to version 21 in any sort of graceful way. Does anybody know why this went in now? jon From jkeating at redhat.com Thu Jan 25 16:20:28 2007 From: jkeating at redhat.com (Jesse Keating) Date: Thu, 25 Jan 2007 11:20:28 -0500 Subject: emacs 22 In-Reply-To: <32449.1169740840@lwn.net> References: <32449.1169740840@lwn.net> Message-ID: <200701251120.28260.jkeating@redhat.com> On Thursday 25 January 2007 11:00, Jonathan Corbet wrote: > Interesting...today's update brought in the emacs 22 pretest snapshot. > This is OK with me - I've been building my own version for a little bit > now. ?But I do find it curious, given that emacs 22 final before the > Fedora 7 release seems, um, unlikely. ?There are certain things in > emacs 22 (gnus being the main example) which do not go back to version > 21 in any sort of graceful way. ?Does anybody know why this went in now? The emacs maintainer felt it was OK to put in, ergo it went in. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From jwilliam at xmission.com Thu Jan 25 16:44:47 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Thu, 25 Jan 2007 09:44:47 -0700 Subject: yum-updatesd error on 25th Message-ID: <002b01c740a0$1fde8410$020aa8c0@a18> # rpm -qa|grep yum yum-metadata-parser-1.0.3-1.fc7 yum-3.1.0-2.fc7 yum-updatesd-3.1.0-2.fc7 Component: Software Updater Summary: TB9a5bb4f4 comps.py:147:parse_package_list:CompsException Traceback (most recent call last): File "/usr/sbin/pup", line 668, in main() File "/usr/sbin/pup", line 664, in main pup.run() File "/usr/sbin/pup", line 499, in run self.doRefresh() File "/usr/sbin/pup", line 274, in doRefresh self.reposSetup(pbar) File "/usr/lib/python2.5/site-packages/pirut/__init__.py", line 151, in reposSetup self.doGroupSetup() File "/usr/lib/python2.5/site-packages/yum/__init__.py", line 408, in doGroupSetup self.comps.add(groupfile) File "/usr/lib/python2.5/site-packages/yum/comps.py", line 343, in add group = Group(elem) File "/usr/lib/python2.5/site-packages/yum/comps.py", line 61, in __init__ self.parse(elem) File "/usr/lib/python2.5/site-packages/yum/comps.py", line 137, in parse self.parse_package_list(child) File "/usr/lib/python2.5/site-packages/yum/comps.py", line 147, in parse_package_list raise CompsException CompsException Local variables in innermost frame: genre: optinoal self: Graphics child: packagelist_elem: package: digikam From mschwendt.tmp0701.nospam at arcor.de Thu Jan 25 17:11:48 2007 From: mschwendt.tmp0701.nospam at arcor.de (Michael Schwendt) Date: Thu, 25 Jan 2007 18:11:48 +0100 Subject: yum-updatesd error on 25th In-Reply-To: <002b01c740a0$1fde8410$020aa8c0@a18> References: <002b01c740a0$1fde8410$020aa8c0@a18> Message-ID: <20070125181148.e0b86953.mschwendt.tmp0701.nospam@arcor.de> On Thu, 25 Jan 2007 09:44:47 -0700, Jerry Williams wrote: > # rpm -qa|grep yum > yum-metadata-parser-1.0.3-1.fc7 > yum-3.1.0-2.fc7 > yum-updatesd-3.1.0-2.fc7 > > > Component: Software Updater > Summary: TB9a5bb4f4 comps.py:147:parse_package_list:CompsException > > Traceback (most recent call last): > File "/usr/sbin/pup", line 668, in > main() > File "/usr/sbin/pup", line 664, in main > pup.run() > File "/usr/sbin/pup", line 499, in run > self.doRefresh() > File "/usr/sbin/pup", line 274, in doRefresh > self.reposSetup(pbar) > File "/usr/lib/python2.5/site-packages/pirut/__init__.py", line 151, in > reposSetup > self.doGroupSetup() > File "/usr/lib/python2.5/site-packages/yum/__init__.py", line 408, in > doGroupSetup > self.comps.add(groupfile) > File "/usr/lib/python2.5/site-packages/yum/comps.py", line 343, in add > group = Group(elem) > File "/usr/lib/python2.5/site-packages/yum/comps.py", line 61, in __init__ > self.parse(elem) > File "/usr/lib/python2.5/site-packages/yum/comps.py", line 137, in parse > self.parse_package_list(child) > File "/usr/lib/python2.5/site-packages/yum/comps.py", line 147, in > parse_package_list > raise CompsException > CompsException > > Local variables in innermost frame: > genre: optinoal > self: Graphics > child: > packagelist_elem: > package: digikam https://bugzilla.redhat.com/224292 From jwilliam at xmission.com Thu Jan 25 17:31:30 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Thu, 25 Jan 2007 10:31:30 -0700 Subject: Help fix fc7 rescue. minstg2.img In-Reply-To: <003301c73fd8$60d2c4e0$020aa8c0@a18> References: <000601c73f17$3d3fd660$020aa8c0@a18><1169649107.2747.2.camel@aglarond.local> <003301c73fd8$60d2c4e0$020aa8c0@a18> Message-ID: <003201c740a6$a6826260$020aa8c0@a18> It works now! :) Thanks! Greetings. anaconda installer init version 11.2.0.17 starting Still see python2.6 with warnings. And when I use console=ttyS0,9600n8 and get to the screen to select language and hit tab the first time I see: SysRq : HELP : loglevel0-8 reBoot Crashdump show-all-locks(D) tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount showBlockedTasks Hit tab again and it all looks good. > -----Original Message----- > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > bounces at redhat.com] On Behalf Of Jerry Williams > Sent: Wednesday, January 24, 2007 9:55 AM > To: 'For testers of Fedora Core development releases' > Cc: 'Jeremy Katz' > Subject: RE: Help fix fc7 rescue. minstg2.img > > Well it works now if you don't try and have it find and mount the disk. > > Greetings. > anaconda installer init version 11.2.0.15 starting > > It you select continue you get this: > File "/usr/bin/anaconda", line 694, in > rescue.runRescue(anaconda) > File "/usr/lib/anaconda/rescue.py", line 296, in runRescue > disks = upgrade.findExistingRoots(anaconda, upgradeany = 1) > File "/usr/lib/anaconda/upgrade.py", line 97, in findExistingRoots > rootparts = anaconda.id.diskset.findExistingRootPartitions(upgradeany > = > upgradeany) > File "/usr/lib/anaconda/partedUtils.py", line 795, in > findExistingRootPartitions > protected = self.anaconda.method.protectedPartitions() > AttributeError: 'NoneType' object has no attribute 'protectedPartitions' > install exited abnormally [1/1] > > It you select readonly you get this: > Traceback (most recent call last): > File "/usr/bin/anaconda", line 694, in > rescue.runRescue(anaconda) > File "/usr/lib/anaconda/rescue.py", line 296, in runRescue > disks = upgrade.findExistingRoots(anaconda, upgradeany = 1) > File "/usr/lib/anaconda/upgrade.py", line 97, in findExistingRoots > rootparts = anaconda.id.diskset.findExistingRootPartitions(upgradeany > = > upgradeany) > File "/usr/lib/anaconda/partedUtils.py", line 795, in > findExistingRootPartitions > protected = self.anaconda.method.protectedPartitions() > AttributeError: 'NoneType' object has no attribute 'protectedPartitions' > install exited abnormally [1/1] > > Looks like the same thing for read only. > Skip works great now! Thanks! > > I also never see the Keyboard Type but have to hit enter a few times when > I > have set console=ttyS0,9600n8 and I see this message: > > SysRq : HELP : loglevel0-8 reBoot Crashdump show-all-locks(D) tErm Full > kIll > saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount > showBlockedTasks > > So to restate what I see, I see the screen with "Choose a Language" hit > enter, strange message, hit enter, hit enter, see "Rescue Method". > > Not sure if this is normal or not because you probably aren't going to > care > about the keyboard if you are using a serial connection, but then I would > think that you shouldn't have to hit enter 2 time either. > > Not sure if you saw this or not either: > > Running anaconda, the Fedora Core rescue mode - please wait... > /usr/lib/python2.5/site-packages/yum/__init__.py:435: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/packageSack.py:40: Warning: 'with' > will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/packageSack.py:216: Warning: 'with' > will become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/packageSack.py:217: Warning: 'with' > will become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/repos.py:169: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/repos.py:193: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/repos.py:196: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/repos.py:200: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/yumRepo.py:70: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/yumRepo.py:71: Warning: 'with' will > become a reserved keyword in Python 2.6 > /usr/lib/python2.5/site-packages/yum/yumRepo.py:74: Warning: 'with' will > become a reserved keyword in Python 2.6 > > > -----Original Message----- > > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > > bounces at redhat.com] On Behalf Of Jeremy Katz > > Sent: Wednesday, January 24, 2007 7:32 AM > > To: For testers of Fedora Core development releases > > Subject: Re: Help fix fc7 rescue. minstg2.img > > > > On Tue, 2007-01-23 at 10:52 -0700, Jerry Williams wrote: > > > Please help me fix the Fedora 7 rescue image. > > [snip] > > > TypeError: setMethod() takes exactly 2 arguments (1 given) > > > Install exited abnormally [1/1] > > > > Thanks for the heads-up; I fixed this yesterday afternoon so today's > > rawhide push should have the fix > > > > Jeremy > > > > -- > > fedora-test-list mailing list > > fedora-test-list at redhat.com > > To unsubscribe: > > https://www.redhat.com/mailman/listinfo/fedora-test-list > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list From marc_schwartz at comcast.net Thu Jan 25 17:40:09 2007 From: marc_schwartz at comcast.net (Marc Schwartz) Date: Thu, 25 Jan 2007 11:40:09 -0600 Subject: emacs 22 In-Reply-To: <200701251120.28260.jkeating@redhat.com> References: <32449.1169740840@lwn.net> <200701251120.28260.jkeating@redhat.com> Message-ID: Jesse Keating wrote: > On Thursday 25 January 2007 11:00, Jonathan Corbet wrote: >> Interesting...today's update brought in the emacs 22 pretest snapshot. >> This is OK with me - I've been building my own version for a little bit >> now. But I do find it curious, given that emacs 22 final before the >> Fedora 7 release seems, um, unlikely. There are certain things in >> emacs 22 (gnus being the main example) which do not go back to version >> 21 in any sort of graceful way. Does anybody know why this went in now? > > The emacs maintainer felt it was OK to put in, ergo it went in. FWIW, I had been using 22, built from cvs with the xft patches last year. I found it to be a bit unstable with periodic and unpredictable crashes with some level of interaction noted when Firefox was used. Perhaps related to the FF memory leak issue? I began to use 23, also from cvs, late last year and despite it's Alpha status, has been rock solid. I don't know if the fact that the xft patches were moved into the mainstream Unicode trunk or other issues facilitate the better stability in 23. There are changes in some of the ~/.emacs configs that do need to be considered with both 22 and 23. Also, I am using ECB and had to install the latest CEDET (1.0pre3) and ECB (cvs-snapshot) packages to get them to work properly. Emacs with xft is a thing of beauty on a high-res LCD panel. :-) Anyway, since the topic came up, I thought that I would put in my $0.02. Regards, Marc Schwartz From wwoods at redhat.com Thu Jan 25 18:37:30 2007 From: wwoods at redhat.com (Will Woods) Date: Thu, 25 Jan 2007 13:37:30 -0500 Subject: Today's QA meeting log Message-ID: <1169750250.11970.14.camel@metroid.rdu.redhat.com> Hello! A log of today's meeting is available here: http://qa.fedoraproject.org/irclogs/fedora-qa-20070125.log.html The wiki page for the meeting is here: http://fedoraproject.org/wiki/QA/Meetings/20070125 A summary of today's meeting will be posted there as soon as I have time to write it. -w -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From wwoods at redhat.com Thu Jan 25 18:40:46 2007 From: wwoods at redhat.com (Will Woods) Date: Thu, 25 Jan 2007 13:40:46 -0500 Subject: Next Fedora QA Meeting - at FUDCon (and online), Saturday, Feb 3rd Message-ID: <1169750446.11970.17.camel@metroid.rdu.redhat.com> The next meeting will be held at FUDCon - next Saturday, February 3rd - at a time to be determined once I figure out when other things are going on that day. We'll be on IRC too, so those of you who aren't able to be there can still participate. The quick agenda is here: http://fedoraproject.org/wiki/QA/Meetings/20070203 If you've got agenda items you want discussed, or a certain time you want the meeting to be held at, let me know. -w -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From paul at all-the-johnsons.co.uk Thu Jan 25 21:48:28 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Thu, 25 Jan 2007 21:48:28 +0000 Subject: Mono-basic Message-ID: <1169761708.3445.14.camel@T7.Linux> Hi, Mono 1.2.3 is due at the end of the month and with it will come the new implementation of VB.NET. This implementation though will be available as a separate package and not as part of mono itself. Will it be integrated or will it need to go through the usual review process? TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From fct-cornette at insight.rr.com Fri Jan 26 01:01:46 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Thu, 25 Jan 2007 20:01:46 -0500 Subject: gftp not usable - are others seeing this error? Message-ID: <45B952FA.3040101@insight.rr.com> When I launch gftp I only get the panel but no menus or any data. All I see is the outline where the other objects should be located. I also installed the debuginfo package but do not really know how to get a core dump from the program without bug-buddy's help. How do you get that information? Strace, gdb or what program? Jim -- A wise person makes his own decisions, a weak one obeys public opinion. -- Chinese proverb From netwiz at crc.id.au Fri Jan 26 01:39:44 2007 From: netwiz at crc.id.au (Steven Haigh) Date: Fri, 26 Jan 2007 12:39:44 +1100 Subject: Strange dependancies.... Message-ID: I've just installed the system-config-soundcard package, and just noticed something strange... ======================================================================== ===== Package Arch Version Repository Size ======================================================================== ===== Installing: system-config-soundcard noarch 2.0.5-2.fc6 updates 1.1 M Installing for dependencies: alsa-utils i386 1.0.12-3.fc6 core 1.0 M libogg i386 2:1.1.3-2.fc6 core 19 k libvorbis i386 1:1.1.2-1.2.1 core 192 k pycairo i386 1.2.6-1.fc6 updates 27 k pygtk2 i386 2.10.3-4.fc6 updates 1.1 M rhpl i386 0.194-1 core 242 k sox i386 12.18.1-1 core 313 k wireless-tools i386 1:28-1.fc6 core 92 k Does anyone know why system-config-soundcard indirectly requires wireless-tools? :\ -- Steven Haigh Email: netwiz at crc.id.au Web: http://www.crc.id.au Phone: (03) 9017 0597 - 0412 935 897 From sertac.liste at gmail.com Fri Jan 26 02:21:49 2007 From: sertac.liste at gmail.com (=?utf-8?B?U2VydGHDpyDDli4gWcSxbGTEsXo=?=) Date: Fri, 26 Jan 2007 04:21:49 +0200 Subject: Strange dependancies.... In-Reply-To: References: Message-ID: <20070126022149.GA22421@kerouac> * [26.Oca.07 12:39 +1100] Steven Haigh: > Does anyone know why system-config-soundcard indirectly requires > wireless-tools? :\ rhpl requires libiw.so.28 and wireless-tools provides it. -- ~serta? From alexl at redhat.com Fri Jan 26 08:39:08 2007 From: alexl at redhat.com (Alexander Larsson) Date: Fri, 26 Jan 2007 09:39:08 +0100 Subject: Mono-basic In-Reply-To: <1169761708.3445.14.camel@T7.Linux> References: <1169761708.3445.14.camel@T7.Linux> Message-ID: <1169800748.18434.37.camel@greebo> On Thu, 2007-01-25 at 21:48 +0000, Paul wrote: > Hi, > > Mono 1.2.3 is due at the end of the month and with it will come the new > implementation of VB.NET. This implementation though will be available > as a separate package and not as part of mono itself. > > Will it be integrated or will it need to go through the usual review > process? I see no reason to build it as the same srpm. It just causes it to become huge and include stuff that not every user of mono is interested in. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Alexander Larsson Red Hat, Inc alexl at redhat.com alla at lysator.liu.se He's a lonely Amish Green Beret with no name. She's a sarcastic winged snake charmer who don't take no shit from nobody. They fight crime! From buildsys at redhat.com Fri Jan 26 10:47:38 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Fri, 26 Jan 2007 05:47:38 -0500 Subject: rawhide report: 20070126 changes Message-ID: <200701261047.l0QAlcRu027281@hs20-bc2-6.build.redhat.com> Updated Packages: (none) Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From paul at all-the-johnsons.co.uk Fri Jan 26 14:15:34 2007 From: paul at all-the-johnsons.co.uk (Paul) Date: Fri, 26 Jan 2007 14:15:34 +0000 Subject: Mono-basic In-Reply-To: <1169800748.18434.37.camel@greebo> References: <1169761708.3445.14.camel@T7.Linux> <1169800748.18434.37.camel@greebo> Message-ID: <1169820934.3445.21.camel@T7.Linux> Hi, > > Mono 1.2.3 is due at the end of the month and with it will come the new > > implementation of VB.NET. This implementation though will be available > > as a separate package and not as part of mono itself. > > > > Will it be integrated or will it need to go through the usual review > > process? > > I see no reason to build it as the same srpm. It just causes it to > become huge and include stuff that not every user of mono is interested > in. Fair enough. I'll take it then as being a candidate for FE and will do the work on it if you don't want to take it ;-) TTFN Paul -- "Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From jwilliam at xmission.com Fri Jan 26 15:56:35 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Fri, 26 Jan 2007 08:56:35 -0700 Subject: 'with' Warnings Message-ID: <002701c74162$8e645910$020aa8c0@a18> Could someone work on fixing those? I am concerned that when they do get fixed it might introduce more bugs. And it makes it harder to see the real problems. /usr/lib/python2.5/site-packages/yum/__init__.py:435: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:40: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:216: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/packageSack.py:217: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:169: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:193: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:196: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/repos.py:200: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:70: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:71: Warning: 'with' will become a reserved keyword in Python 2.6 /usr/lib/python2.5/site-packages/yum/yumRepo.py:74: Warning: 'with' will become a reserved keyword in Python 2.6 This one came from text install over NFS. Sqlitesack.py:120: Warning: 'with' will become a reserved keyword in Python 2.6 Also got a screen full of funny characters after I hit enter from the message about the install.log file. From katzj at redhat.com Fri Jan 26 16:05:09 2007 From: katzj at redhat.com (Jeremy Katz) Date: Fri, 26 Jan 2007 11:05:09 -0500 Subject: 'with' Warnings In-Reply-To: <002701c74162$8e645910$020aa8c0@a18> References: <002701c74162$8e645910$020aa8c0@a18> Message-ID: <1169827509.7465.6.camel@aglarond.local> On Fri, 2007-01-26 at 08:56 -0700, Jerry Williams wrote: > Could someone work on fixing those? There's a fix in upstream yum, but it involves a slight API change so that with isn't used as a keyword arg. Hence, waiting until there's a yum release to pull it in (and also trying to ensure that callers don't get bitten breaking things worse) Jeremy From miles.lane at gmail.com Fri Jan 26 16:18:11 2007 From: miles.lane at gmail.com (Miles Lane) Date: Fri, 26 Jan 2007 08:18:11 -0800 Subject: Dependency problems for Amarok with fc7 (main, extras + lvn7) Message-ID: amarok-1.4.4-5.fc7.i386.r 100% |=========================| 161 kB 00:01 ---> Package amarok.i386 0:1.4.4-5.fc7 set to be updated --> Running transaction check --> Processing Dependency: libgpod.so.0 for package: amarok --> Processing Dependency: libmtp.so.4 for package: amarok -------------- next part -------------- An HTML attachment was scrubbed... URL: From jwilson at redhat.com Fri Jan 26 16:51:13 2007 From: jwilson at redhat.com (Jarod Wilson) Date: Fri, 26 Jan 2007 11:51:13 -0500 Subject: Fedora Core 6 Test Update: dvgrab-2.1-2.fc6 Message-ID: <200701261651.l0QGpDa1013947@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-124 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 6 Name : dvgrab Version : 2.1 Release : 2.fc6 Summary : Utility to capture video from a DV camera Description : The dvgrab utility will capture digital video from a DV source on the firewire (IEEE-1394) bus. --------------------------------------------------------------------- Update Information: New dvgrab upstream release, v2.1 --------------------------------------------------------------------- * Tue Jan 23 2007 Jarod Wilson - 2.1-2 - It helps to set DESTDIR if you nuke makeinstall... * Tue Jan 23 2007 Jarod Wilson - 2.1-1 - New upstream release --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ dccdc9e52b702c847572a820b598629a1b9c1773 SRPMS/dvgrab-2.1-2.fc6.src.rpm dccdc9e52b702c847572a820b598629a1b9c1773 noarch/dvgrab-2.1-2.fc6.src.rpm 263807b43b7e0f6999d19b9692d56d21bbae9931 ppc/debug/dvgrab-debuginfo-2.1-2.fc6.ppc.rpm 99e1233e788f6be3fbe2b719a3842fd6f91f0421 ppc/dvgrab-2.1-2.fc6.ppc.rpm 952e722213026d45b169d263facd5e5270b07638 x86_64/debug/dvgrab-debuginfo-2.1-2.fc6.x86_64.rpm 9ceb53d3744e1cd84c3fc73bbd7c8fc9034e5115 x86_64/dvgrab-2.1-2.fc6.x86_64.rpm 70d33c5e1c0c5ff861bfa0be59d215e33abbbc43 i386/debug/dvgrab-debuginfo-2.1-2.fc6.i386.rpm ea6ae1a1c85623687e518ad7216bc6c24813705e i386/dvgrab-2.1-2.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Fri Jan 26 16:53:02 2007 From: twaugh at redhat.com (Tim Waugh) Date: Fri, 26 Jan 2007 11:53:02 -0500 Subject: Fedora Core 6 Test Update: ghostscript-8.15.3-4.fc6 Message-ID: <200701261653.l0QGr2H0014730@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-126 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 6 Name : ghostscript Version : 8.15.3 Release : 4.fc6 Summary : A PostScript(TM) interpreter and renderer. Description : Ghostscript is a set of software that provides a PostScript(TM) interpreter, a set of C procedures (the Ghostscript library, which implements the graphics capabilities in the PostScript language) and an interpreter for Portable Document Format (PDF) files. Ghostscript translates PostScript code into many common, bitmapped formats, like those understood by your printer or screen. Ghostscript is normally used to display PostScript files and to print PostScript files to non-PostScript printers. If you need to display PostScript files or print them to non-PostScript printers, you should install ghostscript. If you install ghostscript, you also need to install the ghostscript-fonts package. --------------------------------------------------------------------- Update Information: This update adds some drivers that were inadvertently missed out previously. --------------------------------------------------------------------- * Wed Jan 24 2007 Tim Waugh 8.15.3-4 - Configure with --with-drivers=ALL since the advertised default is not what gets used (bug #223819). * Thu Jan 18 2007 Tim Waugh 8.15.3-3 - Backported gxcht 64bit crash fix from GPL trunk (bug #177763). * Fri Jan 12 2007 Tim Waugh 8.15.3-2 - Own cjkv directory (bug #221380, bug #222375). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 1fcac3daa353a15a3f9803c158c98842909d2499 SRPMS/ghostscript-8.15.3-4.fc6.src.rpm 1fcac3daa353a15a3f9803c158c98842909d2499 noarch/ghostscript-8.15.3-4.fc6.src.rpm 55d313df45c9e9a50c07309961d946c3975e97cc ppc/ghostscript-devel-8.15.3-4.fc6.ppc.rpm 38017a90e4f9378f39f05c84f70c332cdd37a056 ppc/debug/ghostscript-debuginfo-8.15.3-4.fc6.ppc.rpm a5ff4c6f3c738f2ea0724ed25b651692acc91b67 ppc/ghostscript-8.15.3-4.fc6.ppc.rpm 70063d058cb357af75436f6ca0345a3459120503 ppc/ghostscript-gtk-8.15.3-4.fc6.ppc.rpm ef08400d19c86be943bcb2872fa4305866d5ccac x86_64/ghostscript-devel-8.15.3-4.fc6.x86_64.rpm ead90e93d9460610e2ab249d45a3327abbd1ba10 x86_64/debug/ghostscript-debuginfo-8.15.3-4.fc6.x86_64.rpm 7bb957e3b50dcc20fb8e37ec0c6a9552716b5cc9 x86_64/ghostscript-gtk-8.15.3-4.fc6.x86_64.rpm fafdb7e1cc748857be8d0ba267c81d0ead20e6fb x86_64/ghostscript-8.15.3-4.fc6.x86_64.rpm f18eead56a67cb25ef5c0959f382f9034ad60193 i386/ghostscript-8.15.3-4.fc6.i386.rpm e2138f0fff12fb818a76f2cfc4669a46950ef278 i386/debug/ghostscript-debuginfo-8.15.3-4.fc6.i386.rpm 76f889bb76c3aa1e8d2e74d32e5f405a55a42557 i386/ghostscript-devel-8.15.3-4.fc6.i386.rpm af029d48ce8db0c7c366403021d89565ab195a5f i386/ghostscript-gtk-8.15.3-4.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Fri Jan 26 16:54:10 2007 From: twaugh at redhat.com (Tim Waugh) Date: Fri, 26 Jan 2007 11:54:10 -0500 Subject: Fedora Core 6 Test Update: cups-1.2.7-1.8.fc6 Message-ID: <200701261654.l0QGsAQx015105@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-127 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 6 Name : cups Version : 1.2.7 Release : 1.8.fc6 Summary : Common Unix Printing System Description : The Common UNIX Printing System provides a portable printing layer for UNIX?? operating systems. It has been developed by Easy Software Products to promote a standard printing solution for all UNIX vendors and users. CUPS provides the System V and Berkeley command-line interfaces. --------------------------------------------------------------------- Update Information: This is another attempt to fix the ipp backend busy-loop problem. --------------------------------------------------------------------- * Wed Jan 24 2007 Tim Waugh 1:1.2.7-1.8 - Try another fix for bug #219330 (STR #2179). * Fri Jan 12 2007 Tim Waugh 1:1.2.7-1.7 - Don't even reload CUPS when rotating logs (bug #215024). * Wed Jan 3 2007 Tim Waugh 1:1.2.7-1.6 - Applied upstream patch to avoid busy loop in client (STR #2179, bug #219330). * Fri Dec 8 2006 Tim Waugh - Requires tmpwatch for the cron.daily script (bug #218901). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 65e7c8a9386efa22f8a13a9bda0e37f6e54a5688 SRPMS/cups-1.2.7-1.8.fc6.src.rpm 65e7c8a9386efa22f8a13a9bda0e37f6e54a5688 noarch/cups-1.2.7-1.8.fc6.src.rpm 2abe688498e3bfa5af53b633480b6400e5c62b5a ppc/cups-lpd-1.2.7-1.8.fc6.ppc.rpm 2d7124252ef9a61532baa0ad16d9c8b418b4b2b0 ppc/cups-1.2.7-1.8.fc6.ppc.rpm 120c17e37be7075e669ae3517bc11915f1c4fe26 ppc/cups-libs-1.2.7-1.8.fc6.ppc.rpm 577deb23965d45ad66375fdc16abb5db29c8dd74 ppc/cups-devel-1.2.7-1.8.fc6.ppc.rpm 79348139ff67cd794f02250e04f36c6d6b948f47 ppc/debug/cups-debuginfo-1.2.7-1.8.fc6.ppc.rpm af9454f3f863f2dc8a3b34bbe657e1e852ebec8b x86_64/cups-devel-1.2.7-1.8.fc6.x86_64.rpm 9113cb604a0c5d6164af8724c1987ddd7a943b03 x86_64/cups-libs-1.2.7-1.8.fc6.x86_64.rpm 729c5d2f2282a6da5fd51d82e8fc5949de204a2f x86_64/cups-lpd-1.2.7-1.8.fc6.x86_64.rpm 44ec4a6b428370854444ad7b63805f3856954092 x86_64/debug/cups-debuginfo-1.2.7-1.8.fc6.x86_64.rpm b6fffa1d9d508e17dd4da12af9faee277aabbe59 x86_64/cups-1.2.7-1.8.fc6.x86_64.rpm a1a8b00d3cf5de857a83ab2f35868a3ab2143369 i386/cups-libs-1.2.7-1.8.fc6.i386.rpm b3ba486e1ae1156e781841f0ff3fd812a7822ade i386/debug/cups-debuginfo-1.2.7-1.8.fc6.i386.rpm 34c6f19db5f6f6820024e7a783c42ba524856cd7 i386/cups-lpd-1.2.7-1.8.fc6.i386.rpm b4d9fe01a71a1301685ccd9ea6460807b2bfe14e i386/cups-devel-1.2.7-1.8.fc6.i386.rpm 84d6053ffde4da8fd6b5ea5de638d4bbbd73932e i386/cups-1.2.7-1.8.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From twaugh at redhat.com Fri Jan 26 16:55:52 2007 From: twaugh at redhat.com (Tim Waugh) Date: Fri, 26 Jan 2007 11:55:52 -0500 Subject: Fedora Core 5 Test Update: desktop-printing-0.19-9.fc5 Message-ID: <200701261655.l0QGtqmr015746@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-129 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 5 Name : desktop-printing Version : 0.19 Release : 9.fc5 Summary : Desktop print icon Description : Desktop-printing contains eggcups, a program for user print job notification and control. --------------------------------------------------------------------- Update Information: This update brings desktop-printing to parity with FC-6. --------------------------------------------------------------------- * Wed Jan 24 2007 Tim Waugh 0.19-9 - Fixed parsing of foomatic XML (bug #219283). - Removed broken perl scripting line (bug #214619). - Fixed remote job cancellation (bug #218945). - Fixed HAL printer interface API name (bug #214619). * Fri Nov 3 2006 Matthias Clasen - 0.19-8 - Fix a problem where eggcups loses track of remote jobs (#212763) * Tue Feb 21 2006 Than Ngo 0.19-7 - only show in GNOME --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ 49ddea5b0b409be091fc5bdf67eacb4405fded79 SRPMS/desktop-printing-0.19-9.fc5.src.rpm 49ddea5b0b409be091fc5bdf67eacb4405fded79 noarch/desktop-printing-0.19-9.fc5.src.rpm 3f7de4c6b1a00efb2fc5471c433fba3265cedee8 ppc/debug/desktop-printing-debuginfo-0.19-9.fc5.ppc.rpm 840d5dffc141821a2cf7f3a08b000cd9172c472d ppc/desktop-printing-0.19-9.fc5.ppc.rpm 4ced2deb4d9c4c2571c680720c2ad3eebe93e083 x86_64/desktop-printing-0.19-9.fc5.x86_64.rpm 0da402fd181214ecfb5c06da80f2b0d6f7b5aa36 x86_64/debug/desktop-printing-debuginfo-0.19-9.fc5.x86_64.rpm a974f1d37d40e58d0fd8023ff534de1cb7eb0615 i386/debug/desktop-printing-debuginfo-0.19-9.fc5.i386.rpm f063f60aa2381af1ab2d75749492d15e8ecacb77 i386/desktop-printing-0.19-9.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From ajackson at redhat.com Fri Jan 26 16:57:38 2007 From: ajackson at redhat.com (Adam Jackson) Date: Fri, 26 Jan 2007 11:57:38 -0500 Subject: Fedora Core 6 Test Update: mesa-6.5.1-9.fc6 Message-ID: <200701261657.l0QGvcVM016276@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-131 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 6 Name : mesa Version : 6.5.1 Release : 9.fc6 Summary : Mesa graphics libraries Description : Mesa --------------------------------------------------------------------- * Wed Jan 24 2007 Adam Jackson 6.5.1-9.fc6 - Add a build (and hopefully runtime) fix for mach64. (#221117) * Mon Oct 16 2006 Kristian - 6.5.1-8.fc6 - Add i965-interleaved-arrays-fix.patch to fix (#209318). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 635aed87b587afbfa086c92619a3e4e3afbbba95 SRPMS/mesa-6.5.1-9.fc6.src.rpm 635aed87b587afbfa086c92619a3e4e3afbbba95 noarch/mesa-6.5.1-9.fc6.src.rpm 8e2db520f61d852b162728374105efe131656f94 ppc/mesa-libGLU-devel-6.5.1-9.fc6.ppc.rpm 0db35d84b9d15e5a5f93106ea41acb8093aa2605 ppc/debug/mesa-debuginfo-6.5.1-9.fc6.ppc.rpm 03639b1634734e9cd04ddc5f83c9a06ba79d2c8d ppc/mesa-source-6.5.1-9.fc6.ppc.rpm 8712d2c57d62897eacd3801388966766f9cc6f74 ppc/mesa-libOSMesa-6.5.1-9.fc6.ppc.rpm 2bb167cff5e03d64be5f55575bed88050b989837 ppc/mesa-libGLU-6.5.1-9.fc6.ppc.rpm d4bd20d1516638d8eb2cbad491f6bcf9fb2005ec ppc/glx-utils-6.5.1-9.fc6.ppc.rpm 3c99248b09c0d299bec79a724e3994dc5f8057d9 ppc/mesa-libGL-devel-6.5.1-9.fc6.ppc.rpm 2fd5eaed5afb00421fc48278a8ae20fa98bee84a ppc/mesa-libGL-6.5.1-9.fc6.ppc.rpm b296d6608147aa62bde352af847f47f37e90cfbc ppc/mesa-libOSMesa-devel-6.5.1-9.fc6.ppc.rpm 95c6f80325069a7d4bbb5653fbedafd6db055001 x86_64/glx-utils-6.5.1-9.fc6.x86_64.rpm 29427d2243af98f193aeea9588a9be50de227e95 x86_64/mesa-libGLU-devel-6.5.1-9.fc6.x86_64.rpm ada35e2b6ae89dd33776366306799de1a73fa9b0 x86_64/mesa-libGL-devel-6.5.1-9.fc6.x86_64.rpm 2f8d0131959b61eadd5ef6334820cee40c90683e x86_64/mesa-libOSMesa-devel-6.5.1-9.fc6.x86_64.rpm f3dcff8f5d06e5c5b9c3f3c726455fe31594e9f5 x86_64/mesa-libGLU-6.5.1-9.fc6.x86_64.rpm 00d305891f90d3d62fb064f6e0042bf86b9f8a0c x86_64/mesa-libGL-6.5.1-9.fc6.x86_64.rpm c0121f2a358e2f49e5296cf60be5f71699d568b6 x86_64/mesa-libOSMesa-6.5.1-9.fc6.x86_64.rpm b7b6a00b2ff25066ddfe18dcd8cc97a61e0c749c x86_64/mesa-source-6.5.1-9.fc6.x86_64.rpm e0cfd1ff8f4c878a3ecca48b68bb2d9c251a336c x86_64/debug/mesa-debuginfo-6.5.1-9.fc6.x86_64.rpm 1f6bd8fc6adcf1a49f0e44b02e84a0b45afd42b5 i386/mesa-source-6.5.1-9.fc6.i386.rpm d0802fbbccc01bedabbaeef38bab0db0531fbeac i386/mesa-libGL-devel-6.5.1-9.fc6.i386.rpm 9af36a671866501ff30002d37a292c888da849f7 i386/mesa-libGLU-devel-6.5.1-9.fc6.i386.rpm 92f5d379f1d5fa9085a740fa7425978153afcfee i386/glx-utils-6.5.1-9.fc6.i386.rpm c091d19a3a5baacd528dbfa4c3b90d52e5428be3 i386/mesa-libGL-6.5.1-9.fc6.i386.rpm 0ee948a71917fd9734980173ac8bd1fcbbbe0f67 i386/mesa-libOSMesa-6.5.1-9.fc6.i386.rpm 09f6a4b712bf3f2c36f00552dbbc0f5121f9ee25 i386/mesa-libOSMesa-devel-6.5.1-9.fc6.i386.rpm 9269a24544fc341b650967bd5a77a0fe5ac430d9 i386/mesa-libGLU-6.5.1-9.fc6.i386.rpm 43e2de3a56108ab478a82992854652a07d950e35 i386/debug/mesa-debuginfo-6.5.1-9.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From tjanouse at redhat.com Fri Jan 26 17:05:00 2007 From: tjanouse at redhat.com (Tomas Janousek) Date: Fri, 26 Jan 2007 12:05:00 -0500 Subject: Fedora Core 6 Test Update: gpm-1.20.1-80.fc6 Message-ID: <200701261705.l0QH50sQ018983@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-136 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gpm Version : 1.20.1 Release : 80.fc6 Summary : A mouse server for the Linux console. Description : Gpm provides mouse support to text-based Linux applications like the Emacs editor and the Midnight Commander file management system. Gpm also provides console cut-and-paste operations using the mouse and includes a program to allow pop-up menus to appear at the click of a mouse button. --------------------------------------------------------------------- * Mon Jan 22 2007 Tomas Janousek - 1.20.1-80 - forgot to add the patch for #168076 * Mon Jan 22 2007 Tomas Janousek - 1.20.1-79 - added disttag to release * Mon Jan 22 2007 Tomas Janousek - 1.20.1-78 - refuse connections while waiting for console, fixes #168076 * Mon Jan 22 2007 Tomas Janousek - 1.20.1-77 - #223696: non-failsafe install-info use in scriptlets * Tue Oct 10 2006 Petr Rockai - 1.20-1-76 - align sleeps to tick boundary, should reduce cpu wakeups on laptops, fixes #205064 (patch by Arjan van de Ven) - disable gpm altogether in runlevel 5, it is probably not worth the overhead considering it is barely used at all * Fri Sep 22 2006 Petr Rockai - 1.20.1-75 - fix a bug where gpm daemon kept stdin/out/err open after detaching from terminal, causing eg. pipes from initscript to hang for the lifetime of gpm --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 67a982384c17119ad8064676d86b4afae681f3a9 SRPMS/gpm-1.20.1-80.fc6.src.rpm 67a982384c17119ad8064676d86b4afae681f3a9 noarch/gpm-1.20.1-80.fc6.src.rpm 1a6ef5e1e0a0a4b885e65c0943f60c70edd984a5 ppc/debug/gpm-debuginfo-1.20.1-80.fc6.ppc.rpm 9a37cfe027f24fcd6bfe7ba45791f554fff911b7 ppc/gpm-1.20.1-80.fc6.ppc.rpm 74148b495717868a3c551295ffa0ab3b563fbb32 ppc/gpm-devel-1.20.1-80.fc6.ppc.rpm 059b8ddc3096014d294704bb484802b68013305a x86_64/gpm-devel-1.20.1-80.fc6.x86_64.rpm 3cc1f60f226e54136eec25bb8db6c0d6fc416850 x86_64/gpm-1.20.1-80.fc6.x86_64.rpm 94869d969599e72f3bdb001db4575fa22cb20745 x86_64/debug/gpm-debuginfo-1.20.1-80.fc6.x86_64.rpm 34cf8c3ee39e1dfe63c45060aa513a4939a17791 i386/gpm-1.20.1-80.fc6.i386.rpm a9db910544c39673b81da95fee84cfba9152a66b i386/debug/gpm-debuginfo-1.20.1-80.fc6.i386.rpm 21400df4e520282464898d64932bc1ce12970e8a i386/gpm-devel-1.20.1-80.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From tjanouse at redhat.com Fri Jan 26 17:06:12 2007 From: tjanouse at redhat.com (Tomas Janousek) Date: Fri, 26 Jan 2007 12:06:12 -0500 Subject: Fedora Core 5 Test Update: gpm-1.20.1-80.fc5 Message-ID: <200701261706.l0QH6COO019471@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-137 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 5 Name : gpm Version : 1.20.1 Release : 80.fc5 Summary : A mouse server for the Linux console. Description : Gpm provides mouse support to text-based Linux applications like the Emacs editor and the Midnight Commander file management system. Gpm also provides console cut-and-paste operations using the mouse and includes a program to allow pop-up menus to appear at the click of a mouse button. --------------------------------------------------------------------- * Mon Jan 22 2007 Tomas Janousek - 1.20.1-80 - forgot to add the patch for #168076 * Mon Jan 22 2007 Tomas Janousek - 1.20.1-79 - added disttag to release * Mon Jan 22 2007 Tomas Janousek - 1.20.1-78 - refuse connections while waiting for console, fixes #168076 * Mon Jan 22 2007 Tomas Janousek - 1.20.1-77 - #223696: non-failsafe install-info use in scriptlets * Tue Oct 10 2006 Petr Rockai - 1.20-1-76 - align sleeps to tick boundary, should reduce cpu wakeups on laptops, fixes #205064 (patch by Arjan van de Ven) - disable gpm altogether in runlevel 5, it is probably not worth the overhead considering it is barely used at all * Fri Sep 22 2006 Petr Rockai - 1.20.1-75 - fix a bug where gpm daemon kept stdin/out/err open after detaching from terminal, causing eg. pipes from initscript to hang for the lifetime of gpm * Wed Jul 12 2006 Jesse Keating - 1.20.1-74.1 - rebuild * Wed Jun 7 2006 Jeremy Katz - 1.20.1-74 - rebuild for -devel deps --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ 6a2f8a015e847c3720829062891bde2468f6f011 SRPMS/gpm-1.20.1-80.fc5.src.rpm 6a2f8a015e847c3720829062891bde2468f6f011 noarch/gpm-1.20.1-80.fc5.src.rpm 78ed831fb5f3dc7f447887bca69f03e25bdc3341 ppc/gpm-devel-1.20.1-80.fc5.ppc.rpm e0a8cc1b4b23bdc14822f8d2b884101f9d36da0b ppc/debug/gpm-debuginfo-1.20.1-80.fc5.ppc.rpm 4938ae6d2076c6772afa4b6352e204377f4eab03 ppc/gpm-1.20.1-80.fc5.ppc.rpm 1383bd6e27b6287484ad86c0d5917f842cee2bd2 x86_64/gpm-1.20.1-80.fc5.x86_64.rpm 99c446026bdef663c515439f2ccab0f40c4ff4c6 x86_64/gpm-devel-1.20.1-80.fc5.x86_64.rpm fc9b3904e012777d93c6871133692d00526cfd07 x86_64/debug/gpm-debuginfo-1.20.1-80.fc5.x86_64.rpm afde9f1f1ca904cc04b37cbcc1ac230ed7dbf992 i386/gpm-devel-1.20.1-80.fc5.i386.rpm fc2b4075d714800240acd1c42ef6dc58ce017f81 i386/gpm-1.20.1-80.fc5.i386.rpm d6b5b94769939f2d4e9ec8b658737c51fa614470 i386/debug/gpm-debuginfo-1.20.1-80.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From veillard at redhat.com Fri Jan 26 17:07:20 2007 From: veillard at redhat.com (Daniel Veillard) Date: Fri, 26 Jan 2007 12:07:20 -0500 Subject: Fedora Core 6 Test Update: libvirt-0.1.11-1.fc6 Message-ID: <200701261707.l0QH7KQb019880@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-138 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libvirt Version : 0.1.11 Release : 1.fc6 Summary : Library providing an API to use the Xen virtualization Description : This C library provides an API to use the Xen virtualization framework, and the virsh command line tool to control virtual domains. --------------------------------------------------------------------- Update Information: Update to version 0.1.11, fixes a memory leak. --------------------------------------------------------------------- * Mon Jan 22 2007 Daniel Veillard 0.1.11-1.fc6 - finish inactive Xen domains support - memory leak fix - RelaxNG schemas for XML configs * Wed Dec 20 2006 Daniel Veillard 0.1.10-1.fc6 - support for inactive Xen domains - improved support for Xen display and vnc - a few bug fixes - localization updates --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 6b5256147d5012f3a9f9337954704e012d8ec747 SRPMS/libvirt-0.1.11-1.fc6.src.rpm 6b5256147d5012f3a9f9337954704e012d8ec747 noarch/libvirt-0.1.11-1.fc6.src.rpm 886cc6df2f3210ecb944eda91c6bcde1bcb38548 x86_64/libvirt-python-0.1.11-1.fc6.x86_64.rpm 84288dcd579aae384de72b861282a85bbe038e92 x86_64/debug/libvirt-debuginfo-0.1.11-1.fc6.x86_64.rpm a66f4a0c43503110688b03a311e940d022583b1c x86_64/libvirt-0.1.11-1.fc6.x86_64.rpm 5edb576bb7889ec6a6cad0c5c293f0ff66454589 x86_64/libvirt-devel-0.1.11-1.fc6.x86_64.rpm 8dc4f7b9c36547eb492f5319ec521243a6e19d01 i386/libvirt-devel-0.1.11-1.fc6.i386.rpm 791fc3edbda281606c7b23123ebd3098b3726ff3 i386/libvirt-python-0.1.11-1.fc6.i386.rpm 6ac0e382f4e91f7711f12c02232118336216b8fa i386/debug/libvirt-debuginfo-0.1.11-1.fc6.i386.rpm cde9f9ee4581af82e63edbb95d075c0407f2300c i386/libvirt-0.1.11-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mitr at redhat.com Fri Jan 26 17:08:35 2007 From: mitr at redhat.com (Miloslav Trmac) Date: Fri, 26 Jan 2007 12:08:35 -0500 Subject: Fedora Core 6 Test Update: fetchmail-6.3.6-2.fc6 Message-ID: <200701261708.l0QH8ZIT020186@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-139 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 6 Name : fetchmail Version : 6.3.6 Release : 2.fc6 Summary : A remote mail retrieval and forwarding utility Description : Fetchmail is a remote mail retrieval and forwarding utility intended for use over on-demand TCP/IP links, like SLIP or PPP connections. Fetchmail supports every remote-mail protocol currently in use on the Internet (POP2, POP3, RPOP, APOP, KPOP, all IMAPs, ESMTP ETRN, IPv6, and IPSEC) for retrieval. Then Fetchmail forwards the mail through SMTP so you can read it through your favorite mail client. Install fetchmail if you need to retrieve mail over SLIP or PPP connections. --------------------------------------------------------------------- Update Information: If no new regressions are reported, this update will be pushed final on Jan 26. --------------------------------------------------------------------- * Mon Jan 22 2007 Miloslav Trmac - 6.3.6-2 - Let KPOP use PASS again Resolves: #223661 * Sat Jan 6 2007 Miloslav Trmac - 6.3.6-1 - Update to fetchmail-6.3.6 (CVE-2006-5867, CVE-2006-5974) * Wed Nov 1 2006 Miloslav Trmac - 6.3.5-1 - Update to fetchmail-6.3.5 - Fix some rpmlint warnings --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ b8f74cec57bde68e7f1634c56312d1dce69cdc74 SRPMS/fetchmail-6.3.6-2.fc6.src.rpm b8f74cec57bde68e7f1634c56312d1dce69cdc74 noarch/fetchmail-6.3.6-2.fc6.src.rpm 2ec52c8143fac13c4a48b5a86888553c1435b825 ppc/debug/fetchmail-debuginfo-6.3.6-2.fc6.ppc.rpm f040bb9d95e1dee8af940ff6b814e94168bf7adf ppc/fetchmail-6.3.6-2.fc6.ppc.rpm 6192852eeeb2c94731f16de776cdd330038b40f1 x86_64/debug/fetchmail-debuginfo-6.3.6-2.fc6.x86_64.rpm 9e88f7accb32fe5540de57f68ca94e0fe86b9df5 x86_64/fetchmail-6.3.6-2.fc6.x86_64.rpm 9be8df7c31a23b7fc0b22ef1574427e0b4374f8d i386/debug/fetchmail-debuginfo-6.3.6-2.fc6.i386.rpm 0b0a973850bd3efc05a66778800577050408550e i386/fetchmail-6.3.6-2.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mitr at redhat.com Fri Jan 26 17:09:43 2007 From: mitr at redhat.com (Miloslav Trmac) Date: Fri, 26 Jan 2007 12:09:43 -0500 Subject: Fedora Core 5 Test Update: fetchmail-6.3.6-2.fc5 Message-ID: <200701261709.l0QH9hHm020429@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-140 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 5 Name : fetchmail Version : 6.3.6 Release : 2.fc5 Summary : A remote mail retrieval and forwarding utility Description : Fetchmail is a remote mail retrieval and forwarding utility intended for use over on-demand TCP/IP links, like SLIP or PPP connections. Fetchmail supports every remote-mail protocol currently in use on the Internet (POP2, POP3, RPOP, APOP, KPOP, all IMAPs, ESMTP ETRN, IPv6, and IPSEC) for retrieval. Then Fetchmail forwards the mail through SMTP so you can read it through your favorite mail client. Install fetchmail if you need to retrieve mail over SLIP or PPP connections. --------------------------------------------------------------------- Update Information: If no new regressions are reported, this update will be pushed final on Jan 26. --------------------------------------------------------------------- * Mon Jan 22 2007 Miloslav Trmac - 6.3.6-2 - Let KPOP use PASS again Resolves: #223661 * Sat Jan 6 2007 Miloslav Trmac - 6.3.6-1 - Update to fetchmail-6.3.6 (CVE-2006-5867, CVE-2006-5974) * Wed Nov 1 2006 Miloslav Trmac - 6.3.5-1 - Update to fetchmail-6.3.5 - Fix some rpmlint warnings * Sun Sep 24 2006 Miloslav Trmac - 6.3.4-2 - Don't increase the certificate search path on each poll (#206346) * Wed Jul 12 2006 Jesse Keating - 6.3.4-1.1 - rebuild --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/5/ a50d8e71cb750e24ece8fc3bf7aedbb3e77e12f7 SRPMS/fetchmail-6.3.6-2.fc5.src.rpm a50d8e71cb750e24ece8fc3bf7aedbb3e77e12f7 noarch/fetchmail-6.3.6-2.fc5.src.rpm 2755813d2adae4e9dc775c7eeff0fb1a7d981a4b ppc/debug/fetchmail-debuginfo-6.3.6-2.fc5.ppc.rpm 503161c4ddf18f57b378eb7390448a9859cbf49b ppc/fetchmail-6.3.6-2.fc5.ppc.rpm bb644e79ab7e27c03cc8f994979a01065c38c8a2 x86_64/debug/fetchmail-debuginfo-6.3.6-2.fc5.x86_64.rpm 62690bdd7afa9b6f34a1d9ad67695115df12102a x86_64/fetchmail-6.3.6-2.fc5.x86_64.rpm a5fad6103bfe43e9e9e0b85b7b59c9802ce17e6b i386/fetchmail-6.3.6-2.fc5.i386.rpm 7ab878b7dd572cae85ec0aa2c7898ee684c0e3b2 i386/debug/fetchmail-debuginfo-6.3.6-2.fc5.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From bkoz at redhat.com Fri Jan 26 17:13:25 2007 From: bkoz at redhat.com (Benjamin Kosnik) Date: Fri, 26 Jan 2007 12:13:25 -0500 Subject: Fedora Core 6 Test Update: boost-1.33.1-11.fc6 Message-ID: <200701261713.l0QHDP6J021470@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-144 2007-01-26 --------------------------------------------------------------------- Product : Fedora Core 6 Name : boost Version : 1.33.1 Release : 11.fc6 Summary : The Boost C++ Libraries Description : Boost provides free peer-reviewed portable C++ source libraries. The emphasis is on libraries which work well with the C++ Standard Library, in the hopes of establishing "existing practice" for extensions and providing reference implementations so that the Boost libraries are suitable for eventual standardization. (Some of the libraries have already been proposed for inclusion in the C++ Standards Committee's upcoming C++ Standard Library Technical Report.) --------------------------------------------------------------------- * Tue Jan 23 2007 Benjamin Kosnik 1.33.1-11 - (#215317: static linking doesn't work with -Os) rebuild. * Thu Nov 23 2006 Benjamin Kosnik 1.33.1-10 - (#182414: boost: put tests in %check section) via Rex Dieter - Fix EVR with .fc6 tag via Gianluca Sforna --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 7c2633f3591bb60b20cf39b44bf81c66817e1e32 SRPMS/boost-1.33.1-11.fc6.src.rpm 7c2633f3591bb60b20cf39b44bf81c66817e1e32 noarch/boost-1.33.1-11.fc6.src.rpm a71c69e8cf25c5c01ccd10128f5e5f2bb8a42081 ppc/boost-doc-1.33.1-11.fc6.ppc.rpm b1c7132d6dcb1e37beb9d85438d6e77ecfa9b2d1 ppc/boost-devel-1.33.1-11.fc6.ppc.rpm 8c5060a7303cf26cb9551f94b3b2e9e9b4c8b998 ppc/boost-1.33.1-11.fc6.ppc.rpm 080f129e933ebb08085d5693cf1c217a232a6b45 ppc/debug/boost-debuginfo-1.33.1-11.fc6.ppc.rpm 938a4be35c9005981a16a00b42ce016e47e64421 x86_64/boost-devel-1.33.1-11.fc6.x86_64.rpm 68d390b60e571535e8b267e17cb24959a58f2bbe x86_64/debug/boost-debuginfo-1.33.1-11.fc6.x86_64.rpm 73ac69fb5085472233715872fa9c3309b376cc6e x86_64/boost-1.33.1-11.fc6.x86_64.rpm 20a472b5b2008a6842fc992338a127029020dd2e x86_64/boost-doc-1.33.1-11.fc6.x86_64.rpm 4dfa4a52cffe4ffc0b27d52c8a46659fd718b87a i386/boost-doc-1.33.1-11.fc6.i386.rpm e9869fe351321b718d147dff3b8504a4c76fa02d i386/debug/boost-debuginfo-1.33.1-11.fc6.i386.rpm 8aa14bf38ccb668215cc17d955f6162ce20fba33 i386/boost-devel-1.33.1-11.fc6.i386.rpm 6c5969ae344a972b6b495e158e354dfb72b0aaa3 i386/boost-1.33.1-11.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From jwilliam at xmission.com Sat Jan 27 03:38:36 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Fri, 26 Jan 2007 20:38:36 -0700 Subject: 'with' Warnings In-Reply-To: <1169827509.7465.6.camel@aglarond.local> References: <002701c74162$8e645910$020aa8c0@a18> <1169827509.7465.6.camel@aglarond.local> Message-ID: <001201c741c4$a0a9b360$020aa8c0@a18> > On Fri, 2007-01-26 at 08:56 -0700, Jerry Williams wrote: > > Could someone work on fixing those? > > There's a fix in upstream yum, but it involves a slight API change so > that with isn't used as a keyword arg. Hence, waiting until there's a > yum release to pull it in (and also trying to ensure that callers don't > get bitten breaking things worse) > > Jeremy As long as it is in the works I am happy. I can wait. Thanks for the update! From clydekunkel7734 at cox.net Sat Jan 27 03:42:36 2007 From: clydekunkel7734 at cox.net (Clyde E. Kunkel) Date: Fri, 26 Jan 2007 22:42:36 -0500 Subject: network install of rawhide of 20060126 fails Message-ID: <45BACA2C.2050400@cox.net> Should rawhide of 20060126 be installable via http? I get an error that the stage2.img cannot be loaded and console 3 indicates it is trying to transfer stage2.img to fd and then it says trying to transfer ..disk1/stage2.img to fd then error in the gui screen. -- Regards, Old Fart (my reply-to address is "munged" to defeat spambots) From jwilliam at xmission.com Sat Jan 27 04:17:42 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Fri, 26 Jan 2007 21:17:42 -0700 Subject: pxe boot, NFS, Text install problems, selinux won't let sshd run bash Message-ID: <001401c741ca$16b04b00$020aa8c0@a18> >From text mode install after reboot doing first boot, Network configuration. /usr/lib/python2.5/site-=packages/rhpl/Conf.py:275: DeprecationWarning: raising a string exception is deprecated Raise FileMIssing, self.filename + ' does not exist.' [root at f7 ~]# grep -v ^Install install.log warning: mailcap-2.1.23-1.fc6: Header V3 DSA signature: NOKEY, key ID 897da07a warning: elinks-0.11.1-5.1: Header V3 DSA signature: NOKEY, key ID 4f2a6fd2 [root at f7 ~]# cat selinux_alert.txt Summary SELinux is preventing /usr/sbin/sshd (system_chkpwd_t) "entrypoint" to /bin/bash (shell_exec_t). Detailed Description SELinux denied access requested by /usr/sbin/sshd. It is not expected that this access is required by /usr/sbin/sshd and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /bin/bash, restorecon -v /bin/bash If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385 Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a http://bugzilla.redhat.com/bugzilla/enter_bug.cgi against this package. Additional Information Source Context root:system_r:system_chkpwd_t:SystemLow-SystemHigh Target Context system_u:object_r:shell_exec_t Target Objects /bin/bash [ file ] Affected RPM Packages openssh-server-4.5p1-2.fc7 [application]bash-3.2-4.fc7 [target] Policy RPM selinux-policy-2.5.1-5.fc7 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name plugins.catchall_file Host Name f7.tinyfire.com Platform Linux f7.tinyfire.com 2.6.19-1.2913.fc7 #1 SMP Tue Jan 23 17:55:44 EST 2007 i686 i686 Alert Count 2 Line Numbers Raw Audit Messages avc: denied { entrypoint } for comm="sshd" dev=dm-0 egid=0 euid=0 exe="/usr/sbin/sshd" exit=-13 fsgid=0 fsuid=0 gid=0 items=0 name="bash" path="/bin/bash" pid=2694 scontext=root:system_r:system_chkpwd_t:s0-s0:c0.c1023 sgid=0 subj=system_u:system_r:sshd_t:s0-s0:c0.c1023 suid=0 tclass=file tcontext=system_u:object_r:shell_exec_t:s0 tty=pts1 uid=0 Had to remove picture of the junk on the screen during the install. Too big to post. It happens at least 2 times during the install. From mike at miketc.com Sat Jan 27 05:34:33 2007 From: mike at miketc.com (Mike Chambers) Date: Fri, 26 Jan 2007 23:34:33 -0600 Subject: network install of rawhide of 20060126 fails In-Reply-To: <45BACA2C.2050400@cox.net> References: <45BACA2C.2050400@cox.net> Message-ID: <1169876073.2227.0.camel@scrappy.miketc.com> On Fri, 2007-01-26 at 22:42 -0500, Clyde E. Kunkel wrote: > Should rawhide of 20060126 be installable via http? I get an error that > the stage2.img cannot be loaded and console 3 indicates it is trying to > transfer stage2.img to fd and then it says trying to transfer > ..disk1/stage2.img to fd then error in the gui screen. I can't install via the tree by ftp, http or NFS. -- Mike Chambers Madisonville, KY "Sex is like air, it's not important unless your not getting any!" From buildsys at redhat.com Sat Jan 27 11:15:23 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sat, 27 Jan 2007 06:15:23 -0500 Subject: rawhide report: 20070127 changes Message-ID: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> Updated Packages: anaconda-11.2.0.18-2 -------------------- * Fri Jan 26 2007 Jeremy Katz - 11.2.0.18-2 - rebuild against older pciutils * Fri Jan 26 2007 Jeremy Katz - 11.2.0.18-1 - Fix pkgorder - Give indication of city being pointed at for timezone (clumens, #219417) emacs-22.0.93-5.fc7 ------------------- * Fri Jan 26 2007 Chip Coldwell - 22.0.93-5 - remove Tetris to avoid trademark problems (Ville Skytt?? #224627) * Thu Jan 25 2007 Chip Coldwell - 22.0.93-4 - fixup loaddefs.el dependencies (Dan Nicolaescu #176171) - add BuildRequires: automake (changes to Makefile.in) fedora-release-6.90-2 --------------------- * Fri Jan 26 2007 Jesse Keating - 6.90-2 - Core? What Core? kernel-2.6.19-1.2914.fc7 ------------------------ * Fri Jan 26 2007 Bill Nottingham - turn on CONFIG_SYSFS_DEPRECATED so that things actually work. *sigh* python-virtinst-0.100.0-3.fc7 ----------------------------- * Thu Jan 25 2007 Daniel P. Berrange - 0.100.0-3.fc7 - Make back-compat with old APIs for Cobbler sanity * Thu Jan 25 2007 Daniel P. Berrange - 0.100.0-2.fc7 - Fix errors with NFS mount based installs selinux-policy-2.5.2-2.fc7 -------------------------- * Thu Jan 25 2007 Dan Walsh 2.5.2-2 - Fix squid cachemgr labeling * Thu Jan 25 2007 Dan Walsh 2.5.2-1 - Add ability to generate webadm_t policy - Lots of new interfaces for httpd - Allow sshd to login as unconfined_t Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From jkeating at redhat.com Sat Jan 27 15:50:47 2007 From: jkeating at redhat.com (Jesse Keating) Date: Sat, 27 Jan 2007 10:50:47 -0500 Subject: rawhide report: 20070127 changes In-Reply-To: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> References: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> Message-ID: <200701271050.50658.jkeating@redhat.com> On Saturday 27 January 2007 06:15, buildsys at redhat.com wrote: > * Fri Jan 26 2007 Jeremy Katz - 11.2.0.18-2 > - rebuild against older pciutils > > * Fri Jan 26 2007 Jeremy Katz - 11.2.0.18-1 > - Fix pkgorder > - Give indication of city being pointed at for timezone (clumens, #219417) Well, looks like we didn't quite fix pkgorder the right way, and any spins created that use split media will not work. We'll try to get it fixed for rawhide tomorrow, so those playing at home can compose again. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From cmadams at hiwaay.net Sat Jan 27 16:33:11 2007 From: cmadams at hiwaay.net (Chris Adams) Date: Sat, 27 Jan 2007 10:33:11 -0600 Subject: rawhide report: 20070127 changes In-Reply-To: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> References: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> Message-ID: <20070127163311.GA956217@hiwaay.net> Once upon a time, buildsys at redhat.com said: > fedora-release-6.90-2 > --------------------- > * Fri Jan 26 2007 Jesse Keating - 6.90-2 > - Core? What Core? Somebody give Jesse an apple (or maybe an Apple). -- Chris Adams Systems and Network Administrator - HiWAAY Internet Services I don't speak for anybody but myself - that's enough trouble. From justin.conover at gmail.com Sat Jan 27 17:07:38 2007 From: justin.conover at gmail.com (Justin Conover) Date: Sat, 27 Jan 2007 11:07:38 -0600 Subject: banshee-official-plugins-0.11.3 Message-ID: I've built banshee-11.0.5 and it runs fine on rawhide.x64, trying to build the plugins and I get the following error: checking pkg-config is at least version 0.9.0... yes checking for MONO... yes checking for mono.pc... found checking for Mono.Data.SqliteClient.dll... not found configure: error: missing required Mono Assembly: Mono.Data.SqliteClient.dll # yum provides Mono.Data.SqliteClient.dll mono-data-sqlite.x86_64 1.2.2-1.fc7 installed Matched from: /usr/lib64/mono/1.0/Mono.Data.SqliteClient.dll /usr/lib64/mono/2.0/Mono.Data.SqliteClient.dll /usr/lib64/mono/gac/Mono.Data.SqliteClient/1.0.5000.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll /usr/lib64/mono/gac/Mono.Data.SqliteClient/1.0.5000.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll.mdb /usr/lib64/mono/gac/Mono.Data.SqliteClient/2.0.0.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll /usr/lib64/mono/gac/Mono.Data.SqliteClient/2.0.0.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll.mdb Any thoughts? -------------- next part -------------- An HTML attachment was scrubbed... URL: From fct-cornette at insight.rr.com Sat Jan 27 17:10:40 2007 From: fct-cornette at insight.rr.com (Jim Cornette) Date: Sat, 27 Jan 2007 12:10:40 -0500 Subject: Seamonkey, Thunderbird not working for dragging messages. Message-ID: <45BB8790.7020807@insight.rr.com> There are bug reports for FC6 regarding the breakage of dragging messages being out of order for Thunderbird. There was not any when checked for seamonkey for development at the time. I added a report for development and referenced Fedora Core 6 being broken also. Will the patch with a variation work for seamonkey too? Jim https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=225020 -- When nothing can possibly go wrong, it will. From david at lovesunix.net Sat Jan 27 17:19:53 2007 From: david at lovesunix.net (David Nielsen) Date: Sat, 27 Jan 2007 18:19:53 +0100 Subject: banshee-official-plugins-0.11.3 In-Reply-To: References: Message-ID: <1169918393.14587.18.camel@dawkins> On l?r, 2007-01-27 at 11:07 -0600, Justin Conover wrote: > I've built banshee-11.0.5 and it runs fine on rawhide.x64, trying to > build the plugins and I get the following error: > > checking pkg-config is at least version 0.9.0... yes > checking for MONO... yes > checking for mono.pc... found > checking for Mono.Data.SqliteClient.dll... not found > configure: error: missing required Mono Assembly: > Mono.Data.SqliteClient.dll > > > > # yum provides Mono.Data.SqliteClient.dll > mono-data-sqlite.x86_64 1.2.2-1.fc7 > installed > Matched from: > /usr/lib64/mono/1.0/Mono.Data.SqliteClient.dll > /usr/lib64/mono/2.0/Mono.Data.SqliteClient.dll > /usr/lib64/mono/gac/Mono.Data.SqliteClient/1.0.5000.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll > /usr/lib64/mono/gac/Mono.Data.SqliteClient/1.0.5000.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll.mdb > /usr/lib64/mono/gac/Mono.Data.SqliteClient/2.0.0.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll > /usr/lib64/mono/gac/Mono.Data.SqliteClient/2.0.0.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll.mdb I seem to recall this being because it looks in /usr/lib rather than /usr/lib64 for the pc file that tells pkgconfig where the .dll files are locates... welcome to the wonderful world of improvements due to multilib (well not really this is a bug in the code, you should never hardcode paths but multilib tends to made them visible quite often to much aggrevation on my part). - David -- "Ridicule is the only weapon that can be used against unintelligible propositions. Ideas must be distinct before reason can act upon them.? -Thomas Jefferson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From justin.conover at gmail.com Sat Jan 27 17:25:31 2007 From: justin.conover at gmail.com (Justin Conover) Date: Sat, 27 Jan 2007 11:25:31 -0600 Subject: banshee-official-plugins-0.11.3 In-Reply-To: <1169918393.14587.18.camel@dawkins> References: <1169918393.14587.18.camel@dawkins> Message-ID: On 1/27/07, David Nielsen wrote: > > On l?r, 2007-01-27 at 11:07 -0600, Justin Conover wrote: > > I've built banshee-11.0.5 and it runs fine on rawhide.x64, trying to > > build the plugins and I get the following error: > > > > checking pkg-config is at least version 0.9.0... yes > > checking for MONO... yes > > checking for mono.pc... found > > checking for Mono.Data.SqliteClient.dll... not found > > configure: error: missing required Mono Assembly: > > Mono.Data.SqliteClient.dll > > > > > > > > # yum provides Mono.Data.SqliteClient.dll > > mono-data-sqlite.x86_64 1.2.2-1.fc7 > > installed > > Matched from: > > /usr/lib64/mono/1.0/Mono.Data.SqliteClient.dll > > /usr/lib64/mono/2.0/Mono.Data.SqliteClient.dll > > > /usr/lib64/mono/gac/Mono.Data.SqliteClient/1.0.5000.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll > > > /usr/lib64/mono/gac/Mono.Data.SqliteClient/1.0.5000.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll.mdb > > > /usr/lib64/mono/gac/Mono.Data.SqliteClient/2.0.0.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll > > > /usr/lib64/mono/gac/Mono.Data.SqliteClient/2.0.0.0__0738eb9f132ed756/Mono.Data.SqliteClient.dll.mdb > > > I seem to recall this being because it looks in /usr/lib rather > than /usr/lib64 for the pc file that tells pkgconfig where the .dll > files are locates... welcome to the wonderful world of improvements due > to multilib (well not really this is a bug in the code, you should never > hardcode paths but multilib tends to made them visible quite often to > much aggrevation on my part). > > - David > -- > "Ridicule is the only weapon that can be used against unintelligible > propositions. Ideas must be distinct before reason can act upon them." > -Thomas Jefferson > > > -- > fedora-test-list mailing list > fedora-test-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-test-list > > > Yeah, I've running multilib since around FC3 and I'm starting to get tired of it ;0. More of a pain that it is worth. -------------- next part -------------- An HTML attachment was scrubbed... URL: From paul at permanentmail.com Sat Jan 27 21:31:29 2007 From: paul at permanentmail.com (Paul Dickson) Date: Sat, 27 Jan 2007 14:31:29 -0700 Subject: "cp -a" on a NFS mounted volume results in a zero length file Message-ID: <20070127143129.c98d6c73.paul@permanentmail.com> I'm a bit behind on the devel kernels. I'm currently running 2906 (2.6.20rc4)... In my BZ (https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=219900) I found (and got a fix for) the case were doing a "cp -a src dest" resulted in the dest file being zero length. Has this been apply to the most recent kernels (either devel or vanilla)? Should I bring this up on LKML for 2.6.20? -Paul From paul at permanentmail.com Sat Jan 27 21:54:38 2007 From: paul at permanentmail.com (Paul Dickson) Date: Sat, 27 Jan 2007 14:54:38 -0700 Subject: "cp -a" on a NFS mounted volume results in a zero length file In-Reply-To: <20070127143129.c98d6c73.paul@permanentmail.com> References: <20070127143129.c98d6c73.paul@permanentmail.com> Message-ID: <20070127145438.3354cb9b.paul@permanentmail.com> On Sat, 27 Jan 2007 14:31:29 -0700, Paul Dickson wrote: > I'm a bit behind on the devel kernels. I'm currently running 2906 > (2.6.20rc4)... > > In my BZ (https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=219900) I > found (and got a fix for) the case were doing a "cp -a src dest" resulted > in the dest file being zero length. > > Has this been apply to the most recent kernels (either devel or vanilla)? > Should I bring this up on LKML for 2.6.20? The patch adds NFS support for SELinux xattrs. -Paul From jwilliam at xmission.com Sun Jan 28 07:01:22 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Sun, 28 Jan 2007 00:01:22 -0700 Subject: gnome-games-2.17.90-2.fc7 missing glchess icon Message-ID: <000001c742aa$1f5cfdd0$020aa8c0@a18> # rpm -ql gnome-games|grep desktop /usr/share/applications/gnome-blackjack.desktop /usr/share/applications/gnome-freecell.desktop /usr/share/applications/gnome-glchess.desktop /usr/share/applications/gnome-glines.desktop /usr/share/applications/gnome-gnect.desktop /usr/share/applications/gnome-gnibbles.desktop /usr/share/applications/gnome-gnobots2.desktop /usr/share/applications/gnome-gnomine.desktop /usr/share/applications/gnome-gnotravex.desktop /usr/share/applications/gnome-gnotski.desktop /usr/share/applications/gnome-gtali.desktop /usr/share/applications/gnome-iagno.desktop /usr/share/applications/gnome-mahjongg.desktop /usr/share/applications/gnome-same-gnome.desktop /usr/share/applications/gnome-sol.desktop /usr/share/applications/gnome-sudoku.desktop # grep Icon /usr/share/applications/gnome-freecell.desktop Icon=gnome-freecell # grep Icon /usr/share/applications/gnome-blackjack.desktop Icon=gnome-blackjack # locate gnome-freecell|grep icon /usr/share/icons/hicolor/48x48/apps/gnome-freecell.png # locate gnome-blackjack|grep icon /usr/share/icons/HighContrastLargePrint/48x48/apps/gnome-blackjack.png /usr/share/icons/HighContrastLargePrintInverse/48x48/apps/gnome-blackjack.pn g /usr/share/icons/hicolor/48x48/apps/gnome-blackjack.png # grep Icon /usr/share/applications/gnome-glchess.desktop Icon=glchess # locate glchess|grep icon # Did a search on google for glchess.png and it shows up, but looks like it isn't in the /usr/share/icons/hicolor/48x48/apps directory. gnome-freecell.png shows up. So how long has it been missing? Looks like a long time. From buildsys at redhat.com Sun Jan 28 11:13:17 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Sun, 28 Jan 2007 06:13:17 -0500 Subject: rawhide report: 20070128 changes Message-ID: <200701281113.l0SBDHNP007066@hs20-bc2-6.build.redhat.com> Updated Packages: (none) Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From davej at redhat.com Sun Jan 28 20:02:46 2007 From: davej at redhat.com (Dave Jones) Date: Sun, 28 Jan 2007 15:02:46 -0500 Subject: rawhide report: 20070127 changes In-Reply-To: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> References: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> Message-ID: <20070128200246.GK9081@redhat.com> On Sat, Jan 27, 2007 at 06:15:23AM -0500, buildsys at redhat.com wrote: > kernel-2.6.19-1.2914.fc7 > ------------------------ > * Fri Jan 26 2007 Bill Nottingham > - turn on CONFIG_SYSFS_DEPRECATED so that things actually work. *sigh* Interesting. That should only be needed for ancient versions of udev. (and by ancient, I mean pre 2006) What broke? Dave -- http://www.codemonkey.org.uk From jkeating at redhat.com Sun Jan 28 21:47:43 2007 From: jkeating at redhat.com (Jesse Keating) Date: Sun, 28 Jan 2007 16:47:43 -0500 Subject: rawhide report: 20070127 changes In-Reply-To: <20070128200246.GK9081@redhat.com> References: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> <20070128200246.GK9081@redhat.com> Message-ID: <200701281647.43983.jkeating@redhat.com> On Sunday 28 January 2007 15:02, Dave Jones wrote: > What broke? I think Bill said it kept reordering network devices. Missing symlinks and such. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From davej at redhat.com Sun Jan 28 22:48:34 2007 From: davej at redhat.com (Dave Jones) Date: Sun, 28 Jan 2007 17:48:34 -0500 Subject: rawhide report: 20070127 changes In-Reply-To: <20070128224525.GA27579@kroah.com> References: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> <20070128200246.GK9081@redhat.com> <200701281647.43983.jkeating@redhat.com> <20070128224525.GA27579@kroah.com> Message-ID: <20070128224834.GG23903@redhat.com> On Sun, Jan 28, 2007 at 02:45:25PM -0800, Greg Kroah-Hartman wrote: > On Sun, Jan 28, 2007 at 04:47:43PM -0500, Jesse Keating wrote: > > On Sunday 28 January 2007 15:02, Dave Jones wrote: > > > What broke? > > > > I think Bill said it kept reordering network devices. Missing symlinks and > > such. > > That kernel option should have nothing to do with network devices for > the 2.6.19 kernel release, so I would be very supprised if it changed > anything. For the kernel in question, this was 2.6.20rc5. (I don't think the option even existed back in .19 ?) Dave -- http://www.codemonkey.org.uk From tbrinkman at sbcglobal.net Mon Jan 29 02:03:23 2007 From: tbrinkman at sbcglobal.net (Tom Brinkman) Date: Sun, 28 Jan 2007 20:03:23 -0600 Subject: rawhide report: 20070127 changes In-Reply-To: <20070128224834.GG23903@redhat.com> References: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> <20070128224525.GA27579@kroah.com> <20070128224834.GG23903@redhat.com> Message-ID: <200701282003.23604.tbrinkman@sbcglobal.net> On Sunday 28 January 2007 4:48 pm, Dave Jones wrote: > On Sun, Jan 28, 2007 at 02:45:25PM -0800, Greg Kroah-Hartman wrote: > > On Sun, Jan 28, 2007 at 04:47:43PM -0500, Jesse Keating wrote: > > > On Sunday 28 January 2007 15:02, Dave Jones wrote: > > > > What broke? > > > > > > I think Bill said it kept reordering network devices. > > > Missing symlinks and such. > > > > That kernel option should have nothing to do with network > > devices for the 2.6.19 kernel release, so I would be very > > supprised if it changed anything. > > For the kernel in question, this was 2.6.20rc5. > (I don't think the option even existed back in .19 ?) > > Dave AFAIK, all these are 2.6.20x kernels (tokeep=4), kernel-2.6.19-1.2911.fc7 kernel-2.6.19-1.2912.fc7 kernel-2.6.19-1.2913.fc7 kernel-2.6.19-1.2914.fc7 2914 'reordered' my eth0 to eth1 Bootin older F7 kernels, it was still eth1, so I just adjusted my adsl-setup. FWIW, I also dual boot FC6-test an up to 2895 (again, 4 kernels) my adsl is still eth0 -- Tom Brinkman Corpus Christi, Texas From mclasen at redhat.com Mon Jan 29 03:11:36 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Sun, 28 Jan 2007 22:11:36 -0500 Subject: gnome-games-2.17.90-2.fc7 missing glchess icon In-Reply-To: <000001c742aa$1f5cfdd0$020aa8c0@a18> References: <000001c742aa$1f5cfdd0$020aa8c0@a18> Message-ID: <1170040296.3304.2.camel@localhost.localdomain> On Sun, 2007-01-28 at 00:01 -0700, Jerry Williams wrote: > Did a search on google for glchess.png and it shows up, but looks like it > isn't in the /usr/share/icons/hicolor/48x48/apps directory. > gnome-freecell.png shows up. > > So how long has it been missing? > Looks like a long time. > glchess.svg is in /usr/share/pixmaps From jwilliam at xmission.com Mon Jan 29 03:20:45 2007 From: jwilliam at xmission.com (Jerry Williams) Date: Sun, 28 Jan 2007 20:20:45 -0700 Subject: gnome-games-2.17.90-2.fc7 missing glchess icon In-Reply-To: <1170040296.3304.2.camel@localhost.localdomain> References: <000001c742aa$1f5cfdd0$020aa8c0@a18> <1170040296.3304.2.camel@localhost.localdomain> Message-ID: <002b01c74354$77512930$020aa8c0@a18> > -----Original Message----- > From: fedora-test-list-bounces at redhat.com [mailto:fedora-test-list- > bounces at redhat.com] On Behalf Of Matthias Clasen > Sent: Sunday, January 28, 2007 8:12 PM > To: For testers of Fedora Core development releases > Subject: Re: gnome-games-2.17.90-2.fc7 missing glchess icon > > On Sun, 2007-01-28 at 00:01 -0700, Jerry Williams wrote: > > > Did a search on google for glchess.png and it shows up, but looks like > it > > isn't in the /usr/share/icons/hicolor/48x48/apps directory. > > gnome-freecell.png shows up. > > > > So how long has it been missing? > > Looks like a long time. > > > > glchess.svg is in /usr/share/pixmaps Thanks, now we just need to get the rpm fixed to use it. I noticed that it isn't in the menu in KDE either. From alexl at redhat.com Mon Jan 29 09:14:21 2007 From: alexl at redhat.com (Alexander Larsson) Date: Mon, 29 Jan 2007 10:14:21 +0100 Subject: Mono-basic In-Reply-To: <1169820934.3445.21.camel@T7.Linux> References: <1169761708.3445.14.camel@T7.Linux> <1169800748.18434.37.camel@greebo> <1169820934.3445.21.camel@T7.Linux> Message-ID: <1170062061.5135.7.camel@greebo> On Fri, 2007-01-26 at 14:15 +0000, Paul wrote: > Hi, > > > > Mono 1.2.3 is due at the end of the month and with it will come the new > > > implementation of VB.NET. This implementation though will be available > > > as a separate package and not as part of mono itself. > > > > > > Will it be integrated or will it need to go through the usual review > > > process? > > > > I see no reason to build it as the same srpm. It just causes it to > > become huge and include stuff that not every user of mono is interested > > in. > > Fair enough. I'll take it then as being a candidate for FE and will do > the work on it if you don't want to take it ;-) Fine with me. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Alexander Larsson Red Hat, Inc alexl at redhat.com alla at lysator.liu.se He's a globe-trotting gay jungle king from the Mississippi delta. She's a sarcastic antique-collecting college professor with the power to bend men's minds. They fight crime! From buildsys at redhat.com Mon Jan 29 11:02:12 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Mon, 29 Jan 2007 06:02:12 -0500 Subject: rawhide report: 20070129 changes Message-ID: <200701291102.l0TB2CPm011534@hs20-bc2-6.build.redhat.com> Updated Packages: (none) Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From sds at tycho.nsa.gov Mon Jan 29 13:28:40 2007 From: sds at tycho.nsa.gov (Stephen Smalley) Date: Mon, 29 Jan 2007 08:28:40 -0500 Subject: "cp -a" on a NFS mounted volume results in a zero length file In-Reply-To: <20070127145438.3354cb9b.paul@permanentmail.com> References: <20070127143129.c98d6c73.paul@permanentmail.com> <20070127145438.3354cb9b.paul@permanentmail.com> Message-ID: <1170077320.8720.27.camel@moss-spartans.epoch.ncsc.mil> On Sat, 2007-01-27 at 14:54 -0700, Paul Dickson wrote: > On Sat, 27 Jan 2007 14:31:29 -0700, Paul Dickson wrote: > > > I'm a bit behind on the devel kernels. I'm currently running 2906 > > (2.6.20rc4)... > > > > In my BZ (https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=219900) I > > found (and got a fix for) the case were doing a "cp -a src dest" resulted > > in the dest file being zero length. > > > > Has this been apply to the most recent kernels (either devel or vanilla)? > > Should I bring this up on LKML for 2.6.20? > > The patch adds NFS support for SELinux xattrs. No, it makes NFS lie about setting the SELinux attribute, while not truly setting it at all (other than in-core). So it is then lost when the inode is evicted from memory or the system reboots. The patch was rejected upstream. The problem lies in cp (coreutils), not NFS, IIUC - it is making faulty assumptions about setxattr() always being supported when getxattr() is. -- Stephen Smalley National Security Agency From ernesto at ornl.gov Mon Jan 29 14:46:29 2007 From: ernesto at ornl.gov (Ernest L. Williams Jr.) Date: Mon, 29 Jan 2007 09:46:29 -0500 Subject: How does one get the kdeutils installed with yum? Message-ID: <1170081989.4101.14.camel@panther> Hi, How does one get the kdeutils installed on FC6? Error: Missing Dependency: libkmilo.so.1 is needed by package kdeutils-devel Error: Missing Dependency: libkregexpeditorcommon.so.1 is needed by package kdeutils-devel Error: Missing Dependency: libkhexeditcommon.so.0 is needed by package kdeutils-devel Error: Missing Dependency: libksimcore.so.1 is needed by package kdeutils-devel Error: Missing Dependency: libkcmlaptop.so.0 is needed by package kdeutils-devel [root at panther ~]# yum install "libkmi*" Loading "installonlyn" plugin Loading "kmdl" plugin Setting up Install Process Setting up repositories Reading repository metadata in from local files Parsing package install arguments From ikent at redhat.com Mon Jan 29 16:14:58 2007 From: ikent at redhat.com (Ian Kent) Date: Mon, 29 Jan 2007 11:14:58 -0500 Subject: Fedora Core 6 Test Update: autofs-5.0.1-0.rc3.12 Message-ID: <200701291614.l0TGEwfj007420@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-148 2007-01-29 --------------------------------------------------------------------- Product : Fedora Core 6 Name : autofs Version : 5.0.1 Release : 0.rc3.12 Summary : A tool for automatically mounting and unmounting filesystems Description : autofs is a daemon which automatically mounts filesystems when you use them, and unmounts them later when you are not using them. This can include network filesystems, CD-ROMs, floppies, and so forth. --------------------------------------------------------------------- * Mon Jan 29 2007 Ian Kent - 5.0.1-0.rc3.12 - make double quote handing consistent (at least as much as we can). - fix handling of trailing white space in wildcard lookup (forward port bz 199720). - check fqdn of each interface when matching export access list (bz 213700). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ ad2f1dc4276be389b4d50128909edb8fc3f902a5 SRPMS/autofs-5.0.1-0.rc3.12.src.rpm ad2f1dc4276be389b4d50128909edb8fc3f902a5 noarch/autofs-5.0.1-0.rc3.12.src.rpm cd4cd13689478886bf103cf8c78ea306b2603d70 ppc/debug/autofs-debuginfo-5.0.1-0.rc3.12.ppc.rpm 051485831cea26ed2ac10b9ef1d289b711e05942 ppc/autofs-5.0.1-0.rc3.12.ppc.rpm 4fe860cf8fdcf067d5eedbd9fb9f1363bada9d55 x86_64/autofs-5.0.1-0.rc3.12.x86_64.rpm d4d5211243e58029701fd8a082da399926d956ae x86_64/debug/autofs-debuginfo-5.0.1-0.rc3.12.x86_64.rpm 300209dc4e4ad641ad9196809f1e54d279b3a549 i386/autofs-5.0.1-0.rc3.12.i386.rpm 7387fc7157c3be27cdae4e69ec960f0443feafd8 i386/debug/autofs-debuginfo-5.0.1-0.rc3.12.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From notting at redhat.com Mon Jan 29 16:41:38 2007 From: notting at redhat.com (Bill Nottingham) Date: Mon, 29 Jan 2007 11:41:38 -0500 Subject: rawhide report: 20070127 changes In-Reply-To: <20070128224834.GG23903@redhat.com> References: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> <20070128200246.GK9081@redhat.com> <200701281647.43983.jkeating@redhat.com> <20070128224525.GA27579@kroah.com> <20070128224834.GG23903@redhat.com> Message-ID: <20070129164138.GC26425@nostromo.devel.redhat.com> Dave Jones (davej at redhat.com) said: > > > I think Bill said it kept reordering network devices. Missing symlinks and > > > such. > > > > That kernel option should have nothing to do with network devices for > > the 2.6.19 kernel release, so I would be very supprised if it changed > > anything. > > For the kernel in question, this was 2.6.20rc5. > (I don't think the option even existed back in .19 ?) The code that we have that writes the initial network configuration that maps mac addresses <-> device names (so that we handle modules loaded in arbitrary order) associates network devices with physical devices by following net:XXXX symlinks in /sys/bus/pci/devices/XXX, /sys/bus/pcmcia/devices/XXXX, /sys/bus/xen/devices/XXX, etc. The new code (that removes those links) breaks this hard, and rearchitecting everything to have a second pass that walks /sys/class/net/XXX links and associates them with already probed/discovered devices is not something I'm doing at this stage of the freeze. Bill From notting at redhat.com Mon Jan 29 16:44:43 2007 From: notting at redhat.com (Bill Nottingham) Date: Mon, 29 Jan 2007 11:44:43 -0500 Subject: rawhide report: 20070127 changes In-Reply-To: <20070129164138.GC26425@nostromo.devel.redhat.com> References: <200701271115.l0RBFN7g013184@hs20-bc2-6.build.redhat.com> <20070128200246.GK9081@redhat.com> <200701281647.43983.jkeating@redhat.com> <20070128224525.GA27579@kroah.com> <20070128224834.GG23903@redhat.com> <20070129164138.GC26425@nostromo.devel.redhat.com> Message-ID: <20070129164443.GD26425@nostromo.devel.redhat.com> Bill Nottingham (notting at redhat.com) said: > The code that we have that writes the initial network configuration > that maps mac addresses <-> device names (so that we handle modules > loaded in arbitrary order) associates network devices with physical > devices by following net:XXXX symlinks in /sys/bus/pci/devices/XXX, > /sys/bus/pcmcia/devices/XXXX, /sys/bus/xen/devices/XXX, etc. > > The new code (that removes those links) breaks this hard, and > rearchitecting everything to have a second pass that walks /sys/class/net/XXX > links and associates them with already probed/discovered devices > is not something I'm doing at this stage of the freeze. Also, if things like the block layer were converted to this new model (which I assume is coming down the pipe, from this behavior), things would have broken even worse. Bill From gstool at earthlink.net Mon Jan 29 21:16:20 2007 From: gstool at earthlink.net (Gerry Tool) Date: Mon, 29 Jan 2007 15:16:20 -0600 Subject: Will Test 1 be released on schedule tomorrow? Message-ID: <1170105380.11100.3.camel@fc6-32.thetoolshed.us> Will F7 Test1 Release be tomorrow as the schedule indicates? No sign of a .../test/6.90 directory on any mirrors I checked. Gerry From jkeating at redhat.com Mon Jan 29 21:29:23 2007 From: jkeating at redhat.com (Jesse Keating) Date: Mon, 29 Jan 2007 16:29:23 -0500 Subject: Will Test 1 be released on schedule tomorrow? In-Reply-To: <1170105380.11100.3.camel@fc6-32.thetoolshed.us> References: <1170105380.11100.3.camel@fc6-32.thetoolshed.us> Message-ID: <200701291629.23877.jkeating@redhat.com> On Monday 29 January 2007 16:16, Gerry Tool wrote: > Will F7 Test1 Release be tomorrow as the schedule indicates? > > No sign of a .../test/6.90 directory on any mirrors I checked. No, we hit some snags, kernel/anaconda related, and we've slipped the release date. We were trying hard (see #fedora-devel) to get a tree working today, so that we can release on Thurs. I was going to see how we stood today before making any announcements. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From buildsys at redhat.com Tue Jan 30 10:11:49 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Tue, 30 Jan 2007 05:11:49 -0500 Subject: rawhide report: 20070130 changes Message-ID: <200701301011.l0UABn7U016056@hs20-bc2-6.build.redhat.com> Updated Packages: (none) Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 From gparted at gmail.com Tue Jan 30 10:59:15 2007 From: gparted at gmail.com (LarryT) Date: Tue, 30 Jan 2007 11:59:15 +0100 Subject: FC7 from rawhide : "display" menu unavaible ? Message-ID: <45BF2503.7040207@gmail.com> Hi all. Hmm, is too early to ask a question about rawhide FC7 ? Installation was *very* nice from within VMware 5.5, and i do appreciate many changes in the look. I have just one problem atm : I cant find "display menu" which is in the path System/admin/display within FC6. I have only 800 and 640 for resolution.. Larry One more time *excuse-me* if it is too early ! and then forget it ;) From bobhillegas at houston.rr.com Tue Jan 30 15:03:23 2007 From: bobhillegas at houston.rr.com (Bob Hillegas) Date: Tue, 30 Jan 2007 09:03:23 -0600 Subject: Clean install of FC6 - anyone got a solution? In-Reply-To: <200701241136.l0OBaK73013924@hs20-bc2-6.build.redhat.com> References: <200701241136.l0OBaK73013924@hs20-bc2-6.build.redhat.com> Message-ID: <45BF5E3B.70505@houston.rr.com> After a clean install of FC6 and after yum update brought it uptodate, I can't do two things: 1) Control Panel can't add a new printer (clean install means no printer defined), missing printconf-tui 2) After running /etc/cron.daily/makewhatis.cron, apropos returns "nothing appropriate" regardless of argument. What's changed? I've been using FC4 until this install. Thanks, BobH -- ================================================= Bob Hillegas bobhillegas at gmail.com From sonar_guy at c-ccom.com Tue Jan 30 16:04:40 2007 From: sonar_guy at c-ccom.com (Scott Glaser) Date: Tue, 30 Jan 2007 11:04:40 -0500 Subject: Clean install of FC6 - anyone got a solution? In-Reply-To: <45BF5E3B.70505@houston.rr.com> References: <200701241136.l0OBaK73013924@hs20-bc2-6.build.redhat.com> <45BF5E3B.70505@houston.rr.com> Message-ID: <1170173080.3902.1.camel@localhost> On Tue, 2007-01-30 at 09:03 -0600, Bob Hillegas wrote: > After a clean install of FC6 and after yum update brought it uptodate, I > can't do two things: > 1) Control Panel can't add a new printer (clean install means no printer > defined), missing printconf-tui > 2) After running /etc/cron.daily/makewhatis.cron, apropos returns > "nothing appropriate" regardless of argument. > > What's changed? I've been using FC4 until this install. > > Thanks, BobH > > -- > ================================================= > Bob Hillegas > bobhillegas at gmail.com > Bob, I just did a clean install Sunday Night, then a full update and did not experience these issue. 1. Did you verify the ISO sha1sum? 2. Did you do a media check for any media you burned for this install? That is where I would start. Scott Glaer -------------- next part -------------- An HTML attachment was scrubbed... URL: From bobhillegas at houston.rr.com Tue Jan 30 16:33:16 2007 From: bobhillegas at houston.rr.com (Bob Hillegas) Date: Tue, 30 Jan 2007 10:33:16 -0600 Subject: [Fwd: Clean install of FC6 - anyone got a solution?] Message-ID: <45BF734C.3030903@houston.rr.com> Found CUPS Printing Setup Mini-HOWTO (http://www.linuxprinting.org/~till/printing-tutorial/tut.html#CONTENTS) which pointed me to: http://localhost:631/ Using the browser interface I was able to install a Postscript printer on a jet direct interface. Thanks, BobH -------- Original Message -------- Subject: Clean install of FC6 - anyone got a solution? Date: Tue, 30 Jan 2007 09:03:23 -0600 From: Bob Hillegas Reply-To: bobhillegas at gmail.com, For testers of Fedora Core development releases To: fedora-test-list at redhat.com References: <200701241136.l0OBaK73013924 at hs20-bc2-6.build.redhat.com> After a clean install of FC6 and after yum update brought it uptodate, I can't do two things: 1) Control Panel can't add a new printer (clean install means no printer defined), missing printconf-tui 2) After running /etc/cron.daily/makewhatis.cron, apropos returns "nothing appropriate" regardless of argument. What's changed? I've been using FC4 until this install. Thanks, BobH -- ================================================= Bob Hillegas bobhillegas at gmail.com -- fedora-test-list mailing list fedora-test-list at redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list -- ================================================= Bob Hillegas bobhillegas at gmail.com From dqarras at yahoo.com Tue Jan 30 17:29:41 2007 From: dqarras at yahoo.com (Daniel Qarras) Date: Tue, 30 Jan 2007 09:29:41 -0800 (PST) Subject: Step by step instructions for KVM network on Fedora Message-ID: <119244.98979.qm@web36808.mail.mud.yahoo.com> Hi all, I've played with Xen on my Fedora and it's been working fine. Now I'm testing KVM with a 2.6.20 rc kernel, it's working nicely, too, but I'm unable to setup a full-blown networking, i.e., a mode where also icmp/udp work. User-mode networking works well, e.g., yum and firefox run just fine under KVM. Could someone please post a step by step list how to enable non-usermode networking with KVM/QEMU on Fedora? I've googled for this and found instructions (mostly for Debian) but I've not been able to set up this on Fedora. (My test machine has one NIC with a 10.x.x.x address in an intranet. I would want that my KVM guests have, e.g., 192.168.x.x static addresses and they can ping each other, the host machine, and access outside world with tcp/udp/icmp etc. So something what Xen does now automatically on Fedora. Connection initiated from outside world are not essential but would of course be a nice bonus.) Thanks. ____________________________________________________________________________________ It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar. http://tools.search.yahoo.com/toolbar/features/mail/ From kevin at scrye.com Tue Jan 30 21:40:09 2007 From: kevin at scrye.com (Kevin Fenzi) Date: Tue, 30 Jan 2007 14:40:09 -0700 Subject: WorldWide Review Days this weekend Message-ID: <20070130144009.78508807@ningauble.scrye.com> Fedora Worldwide Review Days As part of the upcoming merge of Fedora Core and Fedora Extras, and in concert with FudconBoston, the Fedora project is happy to announce the Fedora Worldwide Review days. Whats a Review Day? A Review day is a day where interested parties gather on irc (or in person at FudconBoston) and review a number of Fedora packages that are awaiting review. Each package will be checked against the current Fedora package guidelines. All of the formerly Fedora Core packages will be up for review this weekend. Why have a review Day? * All the formerly Fedora Core packages will need to be reviewed and checked for compliance with the latest guidelines. If you have ever seen packaging problems with your favorite package, now might be a good time to assist reviewing it. * Interested parties will know to meet other reviewers on a central irc channel or in person at FudconBoston. * Questions about reviews or procedures can be answered quickly on channel. Input on core package reviews can be sent to the package maintainer as part of the review. Where are the Wordwide Review Days? Worldwide Review Days will be done via IRC on the irc.freenode.net IRC network, in channel #fedora-extras. Additionally there will be a number of reviewers and members of the Fedora packaging Commitee physically present at the HackFest sessions after FudconBoston, as well as available on IRC to answer questions or provide assistance. See: http://www.fedoraproject.org/wiki/ThorstenLeemhuis/HackFest If you are available and would like to be invited to the physical HackFest in Boston. When will the Worldwide Review Days be held? The Worldwide Review days will be this Saturday and Sunday (2007-02-03 and 2007-02-04), starting around 9:30am EST. See: http://www.fedoraproject.org/wiki/ThorstenLeemhuis/HackFest for more on the schedule. How does it work? Simply join the irc channel. Folks there will be able to point you to a list of packages needing review. If you are a Fedora Maintainer already you should be able to review and approve packages from that list once you are sure they meet all the guidelines. If you are not currently a Fedora Maintainer, you can still provide valuable input on reviews and help us make all our packages better. Note that many people check IRC only every once in a while. Don't be discouraged if you don't see an immediate reply. Ask your question and leave your IRC window open to collect replies as people have time to do so. Also, it's better to ask your questions and wait than to ask if anyone is there or if you can ask questions. Helpful Links general IRC information: http://www.tldp.org/HOWTO/IRC/beginners.html irc.freenode.net information: http://fedoraproject.org/wiki/Communicate FudConBoston: http://barcamp.org/FudconBoston2007 HackFest: http://www.fedoraproject.org/wiki/ThorstenLeemhuis/HackFest WorldWideReviewDays: http://www.fedoraproject.org/wiki/Extras/WorldWideReviewDays -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From grgoffe at yahoo.com Tue Jan 30 22:08:37 2007 From: grgoffe at yahoo.com (George R Goffe) Date: Tue, 30 Jan 2007 14:08:37 -0800 (PST) Subject: A problem updating FC6 with yum. Message-ID: <542196.99442.qm@web90403.mail.mud.yahoo.com> Howdy, I've been getting error messages for the past couple of days (see below). Am I doing something wrong or is this a "bug"? Regards and thanks for your help. George... yum update Loading "skip-broken" plugin Loading "protectbase" plugin Loading "installonlyn" plugin Loading "fastestmirror" plugin Loading "changelog" plugin Loading "kernel-module" plugin Loading "downloadonly" plugin Plugin "tsflags" uses deprecated constant TYPE_INTERFACE. Please use TYPE_INTERACTIVE instead. Loading "tsflags" plugin Loading "priorities" plugin Loading "allowdowngrade" plugin Loading "fedorakmod" plugin Setting up Update Process Setting up repositories core 100% |=========================| 1.1 kB 00:00 extras 100% |=========================| 1.1 kB 00:00 updates 100% |=========================| 1.2 kB 00:00 Loading mirror speeds from cached hostfile Reading repository metadata in from local files 0 packages excluded due to repository protections 0 packages excluded due to repository priority protections Resolving Dependencies /usr/lib/yum-plugins/kernel-module.py:61: DeprecationWarning: getHdrList() will go away in a future version of Yum. for hdr in conduit.getRpmDB().getHdrList(): --> Populating transaction set with selected packages. Please wait. ---> Package PyQt-examples.x86_64 0:3.17-0.1.fc6 set to be updated ---> Package PyQt-devel.x86_64 0:3.17-0.1.fc6 set to be updated ---> Package PyQt.x86_64 0:3.17-0.1.fc6 set to be updated --> Running transaction check --> Processing Dependency: PyQt = 3.16 for package: PyQt-qscintilla --> Finished Dependency Resolution Error: Missing Dependency: PyQt = 3.16 is needed by package PyQt-qscintilla [root at mechanic ~]# rpm -q PyQt PyQt-3.16-4 [root at mechanic ~]# yum install !$ yum install PyQt Loading "skip-broken" plugin Loading "protectbase" plugin Loading "installonlyn" plugin Loading "fastestmirror" plugin Loading "changelog" plugin Loading "kernel-module" plugin Loading "downloadonly" plugin Plugin "tsflags" uses deprecated constant TYPE_INTERFACE. Please use TYPE_INTERACTIVE instead. Loading "tsflags" plugin Loading "priorities" plugin Loading "allowdowngrade" plugin Loading "fedorakmod" plugin Setting up Install Process Setting up repositories Loading mirror speeds from cached hostfile Reading repository metadata in from local files 0 packages excluded due to repository protections 0 packages excluded due to repository priority protections Parsing package install arguments Resolving Dependencies /usr/lib/yum-plugins/kernel-module.py:61: DeprecationWarning: getHdrList() will go away in a future version of Yum. for hdr in conduit.getRpmDB().getHdrList(): --> Populating transaction set with selected packages. Please wait. ---> Package PyQt.x86_64 0:3.17-0.1.fc6 set to be updated --> Running transaction check --> Processing Dependency: PyQt = 3.16-4 for package: PyQt-examples --> Processing Dependency: PyQt = 3.16 for package: PyQt-qscintilla --> Processing Dependency: PyQt = 3.16-4 for package: PyQt-devel --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package PyQt-examples.x86_64 0:3.17-0.1.fc6 set to be updated ---> Package PyQt-devel.x86_64 0:3.17-0.1.fc6 set to be updated --> Running transaction check --> Processing Dependency: PyQt = 3.16 for package: PyQt-qscintilla --> Finished Dependency Resolution Error: Missing Dependency: PyQt = 3.16 is needed by package PyQt-qscintilla ===== _/_/_/_/ _/_/_/_/ _/_/_/_/ _/_/_/ _/_/_/_/ _/_/_/_/ ----- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/_/ _/_/_/_/ _/ _/ _/_/_/ _/ _/_/ _/_/_/_/ ----- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/_/_/_/ _/_/_/_/ _/_/_/_/ _/ _/ _/_/_/_/ _/_/_/_/ ----- "It's not what you know that hurts you, It's what you know that ain't so." Will Rogers ____________________________________________________________________________________ Food fight? Enjoy some healthy debate in the Yahoo! Answers Food & Drink Q&A. http://answers.yahoo.com/dir/?link=list&sid=396545367 From tibbs at math.uh.edu Wed Jan 31 01:51:22 2007 From: tibbs at math.uh.edu (Jason L Tibbitts III) Date: 30 Jan 2007 19:51:22 -0600 Subject: A problem updating FC6 with yum. In-Reply-To: <542196.99442.qm@web90403.mail.mud.yahoo.com> References: <542196.99442.qm@web90403.mail.mud.yahoo.com> Message-ID: >>>>> "GRG" == George R Goffe writes: GRG> Howdy, I've been getting error messages for the past couple of GRG> days (see below). Am I doing something wrong or is this a "bug"? You will need to wait until PyQt-qscintilla is rebuilt against the new PyQt: GRG> Error: Missing Dependency: PyQt = 3.16 is needed by package GRG> PyQt-qscintilla PyQt was just updated yesterday so I'm not sure how you could have seen this error before then, but in any case, there's a dependency problem there. What's odd is that I don't recall this showing up in the broken dependency report. Feel free to file a ticket against PyQt-qscintilla if there isn't already one open. I'm sure Rex (the maintainer of said package) will have this fixed quickly. If course, if you aren't actually using PyQt-qscintilla then you should consider removing it; this should also get your update to progress further. - J< From jkeating at redhat.com Wed Jan 31 03:19:13 2007 From: jkeating at redhat.com (Jesse Keating) Date: Tue, 30 Jan 2007 22:19:13 -0500 Subject: F7 Test1 Delayed Message-ID: <200701302219.13199.jkeating@redhat.com> by a couple of days. A kernel issue (new sysfs breakage), anaconda (pkgorder was wrong), and some comps issues conspired to delay our Test 1 release. Instead of releasing today (which you probably noticed we didn't do), we'll be releasing on Thursday, provided the mirrors had enough time to sync it up. At this time, we are not altering any other schedule dates. -- Jesse Keating Release Engineer: Fedora -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From buildsys at redhat.com Wed Jan 31 11:49:37 2007 From: buildsys at redhat.com (buildsys at redhat.com) Date: Wed, 31 Jan 2007 06:49:37 -0500 Subject: rawhide report: 20070131 changes Message-ID: <200701311149.l0VBnbLM020755@hs20-bc2-6.build.redhat.com> Removed package lvm2-cluster Updated Packages: alacarte-0.11.1.1-2.fc7 ----------------------- * Fri Jan 26 2007 Matthias Clasen - 0.11.1.1-2 - Fix the Provides: line anaconda-11.2.0.19-1 -------------------- * Tue Jan 30 2007 Jeremy Katz - 11.2.0.19-1 - pkgorder cleanup for various tree layouts (jkeating) - Use $TMPDIR in scripts (Steve Pritchard, #224438) - Wrap timezone label when it's long (clumens, #225444) - Map Fedora -> Fedora Core (notting) - Give a useful error when there's no comps information - Fix localboot from boot disks (pjones) - Kickstart fixes (clumens) * Fri Jan 26 2007 Jeremy Katz - 11.2.0.18-1 - Fix pkgorder - Give indication of city being pointed at for timezone (clumens, #219417) * Wed Jan 24 2007 Jeremy Katz - 11.2.0.17-1 - Disable extra repo for now arts-8:1.5.6-1.fc7 ------------------ * Wed Jan 24 2007 Than Ngo - 6:1.5.6-1.fc7 - 1.5.6 aspell-es-50:0.50-14.fc7 ------------------------ * Wed Jan 24 2007 Ivana Varekova - 50:0.50-14 - spec file cleanup - fix 224147 - rawhide rebuild fails aspell-nl-51:0.1e-2.fc7 ----------------------- * Tue Jan 30 2007 Ivana Varekova - 51:0.1e-2 - remove debuginfo aspell-no-50:0.50.1-10.fc7 -------------------------- * Wed Jan 24 2007 Ivana Varekova - 50:0.50.1-10 - spec file cleanup - fix 224147 - rawhide rebuild fails aspell-pt-50:0.50-11.fc7 ------------------------ * Wed Jan 24 2007 Ivana Varekova - 50:0.50-11 - spec file cleanup - fix 224147 - rawhide rebuild fails autofs-1:5.0.1-0.rc3.13 ----------------------- * Mon Jan 29 2007 Ian Kent - 5.0.1-0.rc3.13 - make double quote handing consistent (at least as much as we can). - fix handling of trailing white space in wildcard lookup (forward port bz 199720). - check fqdn of each interface when matching export access list (bz 213700). automake15-1.5-17 ----------------- * Tue Jan 30 2007 Karsten Hopp 1.5-17 - drop obsolete check bind-31:9.3.4-2.fc7 ------------------- * Mon Jan 29 2007 Adam Tkac 31:9.3.4-2.fc7 - redirected output from bind-chroot prep and preun stages to /dev/null * Thu Jan 25 2007 Adam Tkac 31:9.3.4-1.fc7 - updated to version 9.3.4 which contains security bugfixes * Tue Jan 23 2007 Adam Tkac 31:9.3.3-5.fc7 - package bind-libbind-devel has been marked as obsolete bluez-hcidump-1.33-1.fc7 ------------------------ * Tue Jan 30 2007 David Woodhouse - 1.33-1 - update to bluez-hcidump 1.33 bluez-libs-3.9-1.fc7 -------------------- * Tue Jan 30 2007 David Woodhouse 3.9-1 - Update to bluez-libs 3.9 bluez-utils-3.9-1.fc7 --------------------- * Tue Jan 30 2007 David Woodhouse 3.9-1 - Update to bluez-utils 3.9 brltty-3.7.2-2.1.fc7 -------------------- * Tue Jan 30 2007 Tomas Janousek - 3.7.2-2.1 - quiet postinstall scriptlet, really fixes #224570 * Tue Jan 30 2007 Tomas Janousek - 3.7.2-2 - failsafe postinstall script, fixes #224570 - makefile fix - debuginfo extraction now works * Thu Jan 25 2007 Tomas Janousek - 3.7.2-1.1 - fix building with newer kernel-headers (#224149) busybox-1:1.2.2-4.fc7 --------------------- * Tue Jan 30 2007 Ivana Varekova - 1:1.2.2-4 - remove debuginfo cdrdao-1.2.2-1 -------------- * Wed Jan 24 2007 Harald Hoyer - 1.2.2-1 - version 1.2.2 - built without cdrecord-devel now cman-2.0.60-1.fc6 ----------------- * Thu Oct 05 2006 Chris Feist - 2.0.21-1 - New upstream sources - Build w/ xen deps for fence-xen control-center-1:2.17.90-3.fc7 ------------------------------ * Mon Jan 29 2007 Matthias Clasen - 2.17.90-3 - Support tracker in the search keybinding (#216315) cracklib-2.8.9-7 ---------------- * Thu Jan 25 2007 Nalin Dahyabhai - 2.8.9-7 - fix check for the existence of dictionaries when the caller specifies a location (#224347, upstream #1644628) crontabs-1.10-12.fc7 -------------------- * Mon Jan 29 2007 Marcela Maslanova 1.10-12 - link daily,weekly,monthly - rhbz#224687 * Wed Jan 24 2007 Marcela Maslanova 1.10-11 - crontabs should ignore Cfengine files, rebuilt - Resolves: rhbz#223472 * Wed Oct 11 2006 Marcela Maslanova 1.10-9 - patch (#110894) for delaying more emails in the moment curl-7.16.1-1.fc7 ----------------- * Mon Jan 29 2007 Jindrich Novy 7.16.1-1 - update to 7.16.1 desktop-printing-0.20-3.fc7 --------------------------- * Fri Jan 26 2007 Matthias Clasen 0.20-3 - Fix a crash on logout * Wed Jan 24 2007 Matthias Clasen 0.20-2 - Improve appearance of the default printer capplet device-mapper-1.02.17-1.fc7 --------------------------- * Mon Jan 29 2007 Alasdair Kergon - 1.02.17-1 - Add recent reporting options to dmsetup man page. - Add dmsetup 'help' command and update usage text. - Revise some report fields names. - Use fixed-size fields in report interface and reorder. * Fri Jan 26 2007 Alasdair Kergon - 1.02.16-1 - Update dmsetup to use new libdevmapper reporting functionality. dhcp-12:3.0.5-11.fc7 -------------------- * Tue Jan 30 2007 David Cantrell - 12:3.0.5-11 - Remove FORTIFY_SOURCE=0 leftovers from testing last week (whoops) * Tue Jan 30 2007 David Cantrell - 12:3.0.5-10 - Fix Xen networking problems with partial checksums (#221964) * Mon Jan 29 2007 David Cantrell - 12:3.0.5-9 - Remove dhcptables.pl from the source package - Mark libres.a symbols hidden (#198496) - Set DT_SONAME on libdhcp4client to libdhcp4client-VERSION.so.0 - Make function definition for dst_hmac_md5_init() match the prototype docbook-style-xsl-1.72.0-2.fc7 ------------------------------ * Wed Jan 24 2007 Tomas Mraz 1.72.0-2 - Install missing *.ent from common. dump-0.4b41-5.fc7 ----------------- * Tue Jan 30 2007 Adam Tkac 0.4b41-5.fc7 - fixed dumping of 2TB systems * Mon Jan 29 2007 Adam Tkac 0.4b41-4.fc7 - added Andrew Kroeger's patch. Immutable files are restored correctly eclipse-1:3.2.1-33.fc7 ---------------------- * Mon Jan 29 2007 Ben Konrath 3.2.1-33 - Check for features directory in sdk postun script. - Resolves: #224588. * Fri Jan 26 2007 Ben Konrath 3.2.1-32 - Fix bug in ecj [] patch. * Tue Jan 16 2007 Ben Konrath 3.2.1-31 - Add bugzilla reference to remove jars bug in comment. - Update bugzilla refereces to [] bugs. eclipse-cdt-1:3.1.1-8.fc7 ------------------------- * Mon Jan 29 2007 Jeff Johnston 3.1.1-8 - Resolves: #214624, #224644 - Rebase autotools to 0.0.7 source. enscript-1.6.4-6.fc7 -------------------- * Fri Jan 26 2007 Adam Tkac 1.6.4-6 - wrap_header patch has been improved evolution-2.9.5-4.fc7 --------------------- * Fri Jan 26 2007 Matthew Barnes - 2.9.5-4.fc7 - Compile with the -fno-strict-aliasing flag, which will hopefully improve reliability until the illegal type-punning is fixed (RH bug #224552). * Sun Jan 21 2007 Matthew Barnes - 2.9.5-3.fc7 - Revise evolution-2.7.1-no-gnome-common.patch so that we no longer have to run autoconf before building. - Revise evolution-2.5.4-fix-conduit-dir.patch so that we no longer have to run automake before building. * Wed Jan 10 2007 Matthew Barnes - 2.9.5-2.fc7 - Add patch for GNOME bug #359979 (change EMsgPort semantics). expat-1.95.8-9 -------------- * Tue Jan 30 2007 Joe Orton 1.95.8-9 - regenerate configure/libtool correctly (#199361) - strip DSP files from examples (#186889) - fix expat.h compilation with g++ -pedantic (#190244) file-4.19-2.fc7 --------------- * Thu Jan 25 2007 Martin Bacovsky - 4.19-2.fc7 - Resolves: #223297 - file does not recognize OpenOffice "native" formats - Resolves: #224344 - Magic rules should be in file-libs * Tue Jan 09 2007 Martin Bacovsky - 4.19-1.fc7 - Resolves: #208880 - Pointless file(1) error message while detecting ELF 64-bit file thanks to for patch - Resolves: #214992 - file-devel should own /usr/include/* /usr/lib/lib*.so - Resolves: #203548 - a -devel package should be split out for libmagic - upgrade to new upstream 4.19 - patch revision and cleaning - split package to file, file-devel and file-libs * Wed Aug 23 2006 Martin Bacovsky - 4.17-8 - fix recognition of perl script with embed awk (#203610) firefox-2.0.0.1-4.fc7 --------------------- * Tue Jan 30 2007 Christopher Aillon 2.0.0.1-4 - Fix the DND implementation to not grab, so it works with new GTK+. flex-2.5.33-2.fc7 ----------------- * Tue Jan 30 2007 Petr Machata - 2.5.33-2 - Add Requires:m4. * Fri Jan 19 2007 Petr Machata - 2.5.33-1 - Rebase to 2.5.33 fonts-chinese-3.03-3.fc7 ------------------------ * Wed Jan 31 2007 Caius Chance - 3.03-3.fc7 - Fixed bz#225526: [zh_*] need to add CIDFnmap file back (port el5=>rawhide) * Wed Jan 31 2007 Caius Chance - 3.03-2.fc7 - Fixed bz#225523: Cannot use Chinese fonts on Java application with JRE (porting el5 => rawhide) ftp-0.17-35.fc7 --------------- * Tue Jan 30 2007 Marcela Maslanova - 0.17-35 - nodebug package gcc-4.1.1-54 ------------ * Tue Jan 23 2007 Jakub Jelinek 4.1.1-54 - update from gcc-4_1-branch (-r120507:121069) - PRs c++/28999, libgfortran/30435, objc/30479, rtl-optimization/29329, target/30173, testsuite/12325 - OpenMP fixes (PRs middle-end/27416, middle-end/30421, middle-end/30494) gd-2.0.33-12.fc7 ---------------- * Mon Jan 29 2007 Ivana Varekova 2.0.33-12 - Resolves: #224610 CVE-2007-0455 gd buffer overrun gdb-6.6-2.fc7 ------------- * Fri Jan 26 2007 Jan Kratochvil - 6.6-2 - Backported post gdb-6.6 release PPC `show endian' fixup. - Fix displaying of numeric char arrays as strings (BZ 224128). - Simplified patches by merging upstream accepted ones into a single file. * Sat Jan 20 2007 Jan Kratochvil - 6.6-1 - Upgrade to GDB 6.6. Drop redundant patches, forward-port remaining ones. - Backported post gdb-6.6 release ia64 unwinding fixups. - Testcase for exec() from threaded program (BZ 202689). * Mon Jan 15 2007 Jan Kratochvil - 6.5-27 - Fix the testsuite results broken in 6.5-26, stop invalid testsuite runs. gfs2-utils-0.1.25-1.fc6 ----------------------- * Tue Jan 16 2007 Chris Feist 0.1.24-1 - New upstream sources. - Resolves: rhbz#222747 * Wed Jan 03 2007 Chris Feist 0.1.24-1 - Updated sources - Resolves: rhbz#218560 * Thu Dec 21 2006 Chris Feist 0.1.23-1 - Updated sources - Resolves: rhbz#218560 ghostscript-8.15.3-7.fc7 ------------------------ * Thu Jan 25 2007 Tim Waugh 8.15.3-7 - dvipdf script fixes (bug #88906). - Moved libijs.so and libgs.so into devel package (bug #203623). * Wed Jan 24 2007 Tim Waugh 8.15.3-6 - Configure with --with-drivers=ALL since the advertised default is not what gets used (bug #223819). * Thu Jan 18 2007 Tim Waugh 8.15.3-5 - Backported gxcht 64bit crash fix from GPL trunk (bug #177763). gnome-games-1:2.17.90.1-1.fc7 ----------------------------- * Wed Jan 24 2007 Matthias Clasen - 1:2.17.90.1-1 - Update to 2.17.90.1 gnome-menus-2.17.5-2.fc7 ------------------------ * Mon Jan 29 2007 Adam Jackson - 2.17.5-2 - Fix the redhat-menus Requires: to a version where there's no System.directory conflict. gnome-user-share-0.10-6.fc7 --------------------------- * Wed Jan 24 2007 Matthias Clasen 0.10-6 - Add better categories to the desktop file gnome-utils-1:2.17.91-1.fc7 --------------------------- * Wed Jan 24 2007 Matthias Clasen - 2.17.91-1 - Update to 2.17.91 gtk2-2.10.9-2.fc7 ----------------- * Tue Jan 30 2007 Matthias Clasen - 2.10.9-2 - Fix filechooser search support im-chooser-0.3.4-1.fc7 ---------------------- * Tue Jan 30 2007 Akira TAGOH - 0.3.4-1 - Translations update release. * Wed Jan 24 2007 Matthias Clasen - 0.3.3-3 - Add X-GNOME-PersonalSettings to the desktop file categories (#224159) - Use desktop-file-install indent-2.2.9-15.fc7 ------------------- * Thu Jan 25 2007 Petr Machata - 2.2.9-15 - Ville Skytta: patch for non-failing %post, %preun - Resolves: #223703 kernel-2.6.19-1.2916.fc7 ------------------------ * Tue Jan 30 2007 Dave Jones - 2.6.20rc6-git2 * Mon Jan 29 2007 Chuck Ebbert - 2.6.20rc6-git1 kexec-tools-1.101-58.fc7 ------------------------ * Thu Jan 25 2007 Neil Horman - 1.101-58.fc7 - Updating kdump.init and mkdumprd with most recent RHEL5 fixes - Fixing BuildReq to require elfutils-devel-static krb5-1.6-1 ---------- * Tue Jan 30 2007 Nalin Dahyabhai 1.6-1 - clean up quoting of command-line arguments passed to the krsh/krlogin wrapper scripts * Mon Jan 22 2007 Nalin Dahyabhai - initial update to 1.6, pre-package-reorg - move workstation daemons to a new subpackage (#81836, #216356, #217301), and make the new subpackage require xinetd (#211885) * Mon Jan 22 2007 Nalin Dahyabhai - 1.5-18 - make use of install-info more failsafe (Ville Skytt??, #223704) - preserve timestamps on shell scriptlets at %install-time libIDL-0.8.7-2.fc7 ------------------ * Tue Jan 30 2007 Matthias Clasen - 0.8.7-2 - Fix scriptlets to be failsafe (#223706) libX11-1.0.3-7.fc7 ------------------ * Mon Jan 29 2007 Adam Jackson 1.0.3-7 - Fix xim fd leak. libdhcp-1.19-3.fc7 ------------------ * Tue Jan 30 2007 David Cantrell - 1.19-3 - Rebuild * Mon Jan 29 2007 David Cantrell - 1.19-2 - Rebuild for new libdhcp4client libdrm-2.3.0-2.fc7 ------------------ * Mon Jan 29 2007 Adam Jackson 2.3.0-2 - Change default device mode to 0666. (#221545) libfontenc-1.0.4-2.fc7 ---------------------- * Wed Jan 24 2007 Adam Jackson 1.0.4-2 - Add BuildRequires on xorg-x11-font-utils to set encodings path correctly. libselinux-1.34.0-3.fc7 ----------------------- * Fri Jan 19 2007 Dan Walsh - 1.34.0-2 - Add context function to python to split context into 4 parts libsemanage-1.10.0-2.fc7 ------------------------ libwvstreams-4.2.2-3.fc7 ------------------------ * Wed Jan 24 2007 Harald Hoyer - 4.2.2-3 - fixed code for new g++ version logwatch-7.3.2-5.fc7 -------------------- * Fri Jan 26 2007 Ivana Varekova 7.3.2-5 - add sendmail, automount, amvais and cron patch lvm2-2.02.21-1.fc7 ------------------ * Tue Jan 30 2007 Alasdair Kergon - 2.02.21-1 - Fix vgsplit to handle mirrors. - Reorder fields in reporting field definitions. - Fix vgs to treat args as VGs even when PV fields are displayed. - Fix md signature check to handle both endiannesses. * Fri Jan 26 2007 Alasdair Kergon - 2.02.20-1 - Fix exit statuses of reporting tools. - Add some missing close() and fclose() return code checks. - Add devices/ignore_suspended_devices to ignore suspended dm devices. - Fix refresh_toolcontext() always to wipe persistent device filter cache. - Long-lived processes write out persistent dev cache in refresh_toolcontext(). - Streamline dm_report_field_* interface. - Update reporting man pages. - Add --clustered to man pages. - Add field definitions to report help text. * Mon Jan 22 2007 Milan Broz - 2.02.19-2 - Remove BuildRequires libtermcap-devel Resolves: #223766 mailman-3:2.1.9-5 ----------------- * Mon Jan 29 2007 Harald Hoyer - 3:2.1.9-5 - mailman-2.1.9-LC_CTYPE.patch added (bug #132495) - Resolves: rhbz#132495 make-1:3.81-3.fc7 ----------------- * Thu Jan 25 2007 Petr Machata - 1:3.81-3 - Ville Skytta: patch for non-failing %post, %preun - Resolves: #223709 * Thu Jan 25 2007 Petr Machata - 1:3.81-2 - make now restores rlimit to its original values before launching subprocess (#214033) man-pages-2.43-4.fc7 -------------------- * Mon Jan 29 2007 Ivana Varekova 2.43-4 - fix rt_sigprocmask.2 (#219074) - remove pciconfig_{read,write,iobase}.2 (#219827) - fix swapon.2 (#222493) * Fri Jan 12 2007 Ivana Varekova 2.43-3 - fix mmap2 man page - spec file cleanup * Fri Dec 08 2006 Ivana Varekova 2.43-2 - remove old/wrong patches - fix tgkill/tkill man pages inconsistency mdadm-2.6-1.fc7 --------------- * Fri Jan 26 2007 Doug Ledford - 2.6-1 - Update to latest upstream version - Remove the mdmpd daemon entirely. Now that multipath tools from the lvm/dm packages handles multipath devices well, this is no longer needed. - Various cleanups in the spec file mkinitrd-6.0.6-3 ---------------- * Mon Jan 29 2007 David Cantrell - 6.0.6-3 - Rebuild for new libdhcp4client mktemp-3:1.5-24.fc7 ------------------- * Tue Jan 30 2007 Florian La Roche - do not strip debuginfo data - add dist to release tag nasm-0.98.39-4.fc7 ------------------ * Thu Jan 25 2007 Petr Machata - 0.98.39-4 - Ville Skytta: patch for non-failing %post, %preun - Resolves: #223714 net-tools-1.60-77.fc7 --------------------- * Tue Jan 30 2007 Radek Vok??l - 1.60-77 - touch /etc/ethers (#225381) netpbm-10.35-10.fc7 ------------------- * Mon Jan 29 2007 Jindrich Novy 10.35-10 - bmptopnm won't crash with "BMPlencolormap: internal error!" (#224554) notification-daemon-0.3.6-1.fc7 ------------------------------- * Mon Jan 29 2007 Matthias Clasen - 0.3.6-1 - Update to 0.3.6 - Apply a patch by Thorsten Leemhuis to fix some spec issues ntp-4.2.4-4.fc7 --------------- * Mon Jan 29 2007 Miroslav Lichvar 4.2.4-4 - don't wake up every second (#204748) - add option to enable memory locking (#195617) - fix broadcast client - use option values in ntp-keygen - improve man pages openoffice.org-1:2.2.0-4.3 -------------------------- * Mon Jan 29 2007 Caolan McNamara - 1:2.2.0-4.3 - Resolves: rhbz#225061 openoffice.org-2.2.0.ooo73974.bridges.doublereturn.patch - Resolves: rhbz#225097 library path problems for extensions - Resolves: rhbz#225143 detect newly added printers * Sun Jan 28 2007 Caolan McNamara - 1:2.2.0-4.2 - fix CUPSManager::initialize * Sat Jan 27 2007 Caolan McNamara - 1:2.2.0-4.1 - next candidate openswan-2.4.7-1.fc7 -------------------- * Fri Jan 26 2007 Harald Hoyer - 2.4.7-1 - removed key generation from install phase - version 2.4.7 parted-1.8.2-4.fc7 ------------------ * Tue Jan 30 2007 David Cantrell - 1.8.2-4 - Patched parted.8 man page to show partition names apply to GPT disklabels as well as Mac and PC98 disklabels (#221600) passwd-0.74-2 ------------- * Tue Jan 30 2007 Tomas Mraz 0.74-2 - do not explicitly strip the binary perl-Carp-Clan-5.8-2.fc7 ------------------------ * Fri Jan 26 2007 Robin Norwood - 5.8-2 - Resolves: bz#224571 - Remove erroneous rpm 'provides' of perl(DB) php-5.2.0-9 ----------- * Tue Jan 30 2007 Joe Orton 5.2.0-9 - add php(api), php(zend-abi) provides (#221302) - package /usr/share/php and append to default include_path (#225434) php-pear-1:1.4.11-2 ------------------- * Thu Jan 04 2007 Joe Orton 1:1.4.11-2 - update to 1.4.11 pkgconfig-1:0.21-3.fc7 ---------------------- * Mon Jan 29 2007 Matthias Clasen - 1:0.21-3 - Fix a problem where calling glib-config can lead to an infinite loop pm-utils-0.19.1-6.fc7 --------------------- * Tue Jan 30 2007 Jeremy Katz - 0.19.1-6 - build so that hooks run properly on resume; fix syntax error in functions-intel (pjones) * Fri Jan 26 2007 Phil Knirsch - 0.19.1-5 - Fixed problem with changes in 10NetworkManager hook (#224556) pykickstart-0.93-1.fc7 ---------------------- * Thu Jan 25 2007 Chris Lumens - 0.93-1 - Add support for FC3, RHEL4, and RHEL5. - The key command was not supported until after FC6. - Accept more strings in stringToVersion. sed-4.1.5-7.fc7 --------------- * Thu Jan 25 2007 Petr Machata - 4.1.5-7 - Ville Skytta: patch for non-failing %post, %preun - Resolves: #223716 setroubleshoot-1.8.15-1.fc7 --------------------------- * Fri Jan 12 2007 Dan Walsh - 1.8.15-1 - Update po - Additional Plugins - Cleanup Plugins sound-juicer-2.16.2-2.fc7 ------------------------- * Thu Jan 25 2007 Alexander Larsson - 2.16.2-2 - Remove hicolor icon theme cache (#223483) spamassassin-3.1.7-6.fc7 ------------------------ * Sun Jan 28 2007 Warren Togami 3.1.7-6 - explicit requires on perl(HTTP::Date) and perl(LWP::UserAgent) (Bug #193100) squid-7:2.6.STABLE9-1.fc7 ------------------------- * Mon Jan 29 2007 Martin Bacovsky - 7:2.6.STABLE9-1.fc7 - update to the latest upstream squirrelmail-1.4.8-4.fc6 ------------------------ * Mon Jan 22 2007 Warren Togami 1.4.8-4 - Clean up .orig files (#223648) star-1.5a76-2.fc7 ----------------- * Mon Jan 29 2007 Peter Vrabec 1.5a76-2 - fix buildreq. and rebuild * Thu Jan 18 2007 Jan Cholasta 1.5a76-1 - upgrade * Tue Aug 08 2006 Peter Vrabec 1.5a75-1 - upgrade symlinks-1.2-26.fc7 ------------------- * Tue Jan 30 2007 Florian La Roche - 1.2-26 - do not strip away debuginfo * Thu Jan 18 2007 Tim Waugh - 1.2-25 - Build with LFS support (bug #206407). * Wed Jul 12 2006 Jesse Keating - 1.2-24.2.2 - rebuild sysfsutils-2.1.0-1.fc7 ---------------------- * Sat Sep 29 2007 Jarod Wilson - 2.1.0-1 - Update to upstream release 2.1.0 sysklogd-1.4.1-44.fc7 --------------------- * Mon Jan 29 2007 Peter Vrabec 1.4.1-44 - fix scriptlets sysstat-7.0.3-3.fc7 ------------------- * Tue Jan 30 2007 Ivana Varekova - 7.0.3-3 - remove -s flag * Mon Dec 18 2006 Ivana Varekova - 7.0.3-1 - update to 7.0.3 * Tue Nov 21 2006 Ivana Varekova - 7.0.2-3 - update NFS mount statistic patch system-config-boot-0.2.14-1.fc7 ------------------------------- * Mon Jan 29 2007 Harald Hoyer - 0.2.14-1.fc7 - more build requirements * Mon Oct 09 2006 Harald Hoyer - 0.2.13-1.fc7 - translation update - Resolves: rhbz#216607 thunderbird-1.5.0.9-7.fc7 ------------------------- * Tue Jan 30 2007 Christopher Aillon 1.5.0.9-7 - Updated cursor position patch from tagoh to fix issue with "jumping" cursor when in a textfield with tabs. * Tue Jan 30 2007 Christopher Aillon 1.5.0.9-6 - Fix the DND implementation to not grab, so it works with new GTK+. totem-2.17.90-1.fc7 ------------------- * Mon Jan 29 2007 - Bastien Nocera - 2.17.90-1 - Make the -devel package own /usr/include/totem and below - Resolves: #212093 - Update homepage, and download URLs - Update to 2.17.90, remove obsolete patch traceroute-3:2.0.3-1.1.fc7 -------------------------- * Mon Jan 29 2007 Martin Bacovsky - 3:2.0.3-1.1.fc7 - Resolves: #225063: Re-add Epoch to traceroute units-1.86-3.fc7 ---------------- * Wed Jan 24 2007 Harald Hoyer - 1.86-3 - fixed previous fix for rhbz#220533 vixie-cron-4:4.1-73.fc7 ----------------------- * Mon Jan 29 2007 Marcela Maslanova - 4:4.1-73 - symlinks again - change in symlinks.patch - rhbz#225078 vsftpd-2.0.5-14.fc7 ------------------- * Tue Jan 30 2007 Maros Barabas - 2.0.5-14 - remove file upload permission problem - change name of patch vsfptd-2.0.3-user_config - Resolves #190193 webalizer-2.01_10-31 -------------------- * Mon Jan 29 2007 Joe Orton 2.01_10-31 - rebuild to pick up new db4 soname words-3.0-10.fc7 ---------------- * Wed Jan 24 2007 Karel Zak - 3.0-10 - fix regex that removes possessives ('s) xdelta-1.1.4-1.fc7 ------------------ * Tue Jan 30 2007 Adam Tkac 1.1.4-1.fc7 - version 1.1.4 has been marked as final 1.1.4 version * Mon Jan 29 2007 Adam Tkac 1.1.4pre1-1.fc7 - started using dist macro - updated to 1.1.4pre1 xen-3.0.4-4.fc7 --------------- * Tue Jan 30 2007 Daniel P. Berrange - 3.0.4-4.fc7 - Fix pygrub memory corruption * Tue Jan 23 2007 Daniel P. Berrange - 3.0.4-3.fc7 - Added PVFB back compat for FC5/6 guests * Mon Jan 22 2007 Daniel P. Berrange - 3.0.4-2.fc7 - Ensure the arch-x86 header files are included in xen-devel package - Bring back patch to move /var/xen/dump to /var/lib/xen/dump - Make /var/log/xen mode 0700 xorg-x11-apps-7.1-4.fc7 ----------------------- * Tue Jan 30 2007 Adam Jackson 7.1-4 - Fix man page globs and rebuild for FC7. xorg-x11-drv-i810-1.6.5-11.fc7 ------------------------------ * Tue Jan 30 2007 Jeremy Katz - 1.6.5-11 - update modesetting driver to git snapshot from today xorg-x11-drv-nsc-2.8.1-3.fc7 ---------------------------- * Wed Jan 24 2007 Adam Jackson 2.8.1-2 - nsc-2.8.1-noexecstack.patch: Mark the asm file as execstack-clean for selinux conformance. (#220749) - nsc-2.8.1-xserver12-compat.patch: Build fix for new X server sdk. xorg-x11-drv-savage-2.1.2-1.fc7 ------------------------------- * Mon Jan 29 2007 Adam Jackson 2.1.2-1 - Update to 2.1.2 xorg-x11-drv-trident-1.2.3-2.fc7 -------------------------------- * Mon Jan 29 2007 Adam Jackson 1.2.3-2 - Rebuild for 6 to 7 upgrade path * Wed Jan 24 2007 Adam Jackson 1.2.3-1 - Update to 1.2.3 xorg-x11-server-1.2.0-3.fc7 --------------------------- * Mon Jan 29 2007 Adam Jackson 1.2.0-3 - Fix MMX check on AMD CPUs. (#222332) - Fix Xephyr keysym init on LP64. (#224311) * Wed Jan 24 2007 Adam Jackson 1.2.0-2 - Delete ModulePath lines rather than attempt to munge them. (#186338) xorg-x11-server-utils-7.1-5.fc7 ------------------------------- * Tue Jan 30 2007 Adam Jackson 7.1-5 - Fix man page globs and rebuild for FC7. xorg-x11-utils-7.1-3.fc7 ------------------------ * Tue Jan 30 2007 Adam Jackson 7.1-3 - Fix man page glob and rebuild for FC7. xorg-x11-xfwp-1.0.1-4.fc7 ------------------------- * Tue Jan 30 2007 Adam Jackson 1.0.1-4 - Fix man page globs and rebuild for FC7. xorg-x11-xsm-1.0.2-5.fc7 ------------------------ * Tue Jan 30 2007 Adam Jackson 1.0.2-5 - Fix man page globs and rebuild for FC7. Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11 Broken deps for s390x ---------------------------------------------------------- nautilus-cd-burner - 2.17.6-1.fc7.s390x requires cdrdao From dirk.remmelt at accenture.com Wed Jan 31 16:09:49 2007 From: dirk.remmelt at accenture.com (Dirk Remmelt) Date: Wed, 31 Jan 2007 17:09:49 +0100 Subject: ECC-Support in Firefox 2.0.0.1 gone in FC7? Message-ID: <1170259789.2780.36.camel@evo-425896.securenet> Hello I don't know, if this was mentioned before. I found out that Firefox does not support ECC (elliptic curve cryptography) anymore in rawhide (firefox-2.0.0.1-4.fc7). ECC was supported by (at least) the first 2.0 version in the fedora-development repo. Regards Dirk From mbarnes at redhat.com Wed Jan 31 16:35:19 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Wed, 31 Jan 2007 11:35:19 -0500 Subject: Fedora Core 6 Test Update: evolution-data-server-1.8.3-1.fc6 Message-ID: <200701311635.l0VGZJXK024076@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-155 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : evolution-data-server Version : 1.8.3 Release : 1.fc6 Summary : Backend data server for Evolution Description : The evolution-data-server package provides a unified backend for programs that work with contacts, tasks, and calendar information. It was originally developed for Evolution (hence the name), but is now used by other packages. --------------------------------------------------------------------- Update Information: Update to the latest evolution-data-server 1.8 release. --------------------------------------------------------------------- * Mon Jan 29 2007 Matthew Barnes - 1.8.3-1.fc6 - Update to 1.8.3 * Wed Jan 10 2007 Matthew Barnes - 1.8.2-2.fc6 - Add patch for RH bug #208724 (hang on send/receive). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 48a49fa931063fea8fc3dbef975afece2b05de33 SRPMS/evolution-data-server-1.8.3-1.fc6.src.rpm 48a49fa931063fea8fc3dbef975afece2b05de33 noarch/evolution-data-server-1.8.3-1.fc6.src.rpm a8ca230606abf0b02cbce3653fd9d046cbff7891 ppc/evolution-data-server-devel-1.8.3-1.fc6.ppc.rpm 0afbd49363b943549511bc8ca03cdc49246c8c57 ppc/evolution-data-server-1.8.3-1.fc6.ppc.rpm a496edcbb89f75ddae89a910b1c5972ee76309e2 ppc/debug/evolution-data-server-debuginfo-1.8.3-1.fc6.ppc.rpm 79750eed2d8891f1d0b16cd446b13ea9cb8b5f5f x86_64/evolution-data-server-1.8.3-1.fc6.x86_64.rpm 7dfe2c8799a2f9849cd26acbd2551957f746988e x86_64/evolution-data-server-devel-1.8.3-1.fc6.x86_64.rpm 4883ea5062925c567a50aa6a73b54cf126bca567 x86_64/debug/evolution-data-server-debuginfo-1.8.3-1.fc6.x86_64.rpm 76ac5b7f815400abc6e2f07ae2f90a3ac941d597 i386/evolution-data-server-1.8.3-1.fc6.i386.rpm 04b4be40865bf4ded27053348fb30dbcf06bad15 i386/evolution-data-server-devel-1.8.3-1.fc6.i386.rpm 4f9d2d8fb6bf2eb8d57899f1e5e9e5a07c7587dc i386/debug/evolution-data-server-debuginfo-1.8.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mbarnes at redhat.com Wed Jan 31 16:36:45 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Wed, 31 Jan 2007 11:36:45 -0500 Subject: Fedora Core 6 Test Update: evolution-2.8.3-1.fc6 Message-ID: <200701311636.l0VGajfh024557@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-156 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : evolution Version : 2.8.3 Release : 1.fc6 Summary : GNOME's next-generation groupware suite Description : Evolution is the GNOME mailer, calendar, contact manager and communications tool. The tools which make up Evolution will be tightly integrated with one another and act as a seamless personal information-management tool. --------------------------------------------------------------------- Update Information: Update to the latest evolution 2.8 release. --------------------------------------------------------------------- --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 02520e159ef766140155df28be8572625c495659 SRPMS/evolution-2.8.3-1.fc6.src.rpm 02520e159ef766140155df28be8572625c495659 noarch/evolution-2.8.3-1.fc6.src.rpm 043790a6c0500a75ec8cdfd84664e7bdade07895 ppc/evolution-2.8.3-1.fc6.ppc.rpm 28fd34b4d619718897ed305fd90cf43df90a0809 ppc/evolution-devel-2.8.3-1.fc6.ppc.rpm d2c2e23c8a351c685b5ab7eb0daaf15b2ad3e936 ppc/debug/evolution-debuginfo-2.8.3-1.fc6.ppc.rpm 866a8d5a8528c8a6c2701f33e754ea4cf3ba5e8f x86_64/debug/evolution-debuginfo-2.8.3-1.fc6.x86_64.rpm 73f6c9dce40036e340601cb76b0ad3d2bb0463fd x86_64/evolution-2.8.3-1.fc6.x86_64.rpm 22f3c157234bf7e856a5658450ef443403472f26 x86_64/evolution-devel-2.8.3-1.fc6.x86_64.rpm 6c73a672bf04a5aa65d2bca262b6fa660a822ef6 i386/debug/evolution-debuginfo-2.8.3-1.fc6.i386.rpm c68d9edd94fdbffb40611c6a91259cb9f55e09b6 i386/evolution-devel-2.8.3-1.fc6.i386.rpm f647e20a9d5ce64e84974808f1ea04c4dc004d2a i386/evolution-2.8.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mbarnes at redhat.com Wed Jan 31 16:37:57 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Wed, 31 Jan 2007 11:37:57 -0500 Subject: Fedora Core 6 Test Update: evolution-connector-2.8.3-1.fc6 Message-ID: <200701311637.l0VGbvbN024987@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-157 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : evolution-connector Version : 2.8.3 Release : 1.fc6 Summary : Evolution plugin to interact with MS Exchange Server Description : The connector enables added functionality to Evolution when used with a Microsoft Exchange Server. --------------------------------------------------------------------- Update Information: Update to the latest evolution-connector 2.8 release. --------------------------------------------------------------------- * Tue Jan 30 2007 Matthew Barnes - 2.8.3-1.fc6 - Update to 2.8.3 - Remove patch for GNOME bug #357660 (fixed upstream). * Mon Nov 27 2006 Matthew Barnes - 2.8.2-2.fc6 - Require evolution-data-server-1.8.2, since libcamel's API changed. * Mon Nov 20 2006 Matthew Barnes - 2.8.2-1.fc6 - Update to 2.8.2 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 1eae1ee8c8ed4f557b71baf997c1504e03e1cf78 SRPMS/evolution-connector-2.8.3-1.fc6.src.rpm 1eae1ee8c8ed4f557b71baf997c1504e03e1cf78 noarch/evolution-connector-2.8.3-1.fc6.src.rpm 3aabc53a6e4f66264c62f4c0fddb805ea5fc3693 ppc/evolution-connector-2.8.3-1.fc6.ppc.rpm e5093dc94ae00555eaae65718894d44529a2865e ppc/debug/evolution-connector-debuginfo-2.8.3-1.fc6.ppc.rpm 8299839fc8226403ea47f6b746bd17238fb1c9ee x86_64/debug/evolution-connector-debuginfo-2.8.3-1.fc6.x86_64.rpm f0eb917f56b539c374b5ae8cb309ec3337e34d36 x86_64/evolution-connector-2.8.3-1.fc6.x86_64.rpm 0f9adadce1d0d98d8e6414629a755e05ff6ebf1a i386/evolution-connector-2.8.3-1.fc6.i386.rpm 0e94b4a43852a44d10fa07455362de13049aba6c i386/debug/evolution-connector-debuginfo-2.8.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 16:40:18 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 11:40:18 -0500 Subject: Fedora Core 6 Test Update: notification-daemon-0.3.6-1.fc6 Message-ID: <200701311640.l0VGeIAW026058@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-158 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : notification-daemon Version : 0.3.6 Release : 1.fc6 Summary : Notification Daemon Description : notification-daemon is the server implementation of the freedesktop.org desktop notification specification. --------------------------------------------------------------------- Update Information: The latest stable upstream release of notification-daemon fixes a problem with timing out of notifications. --------------------------------------------------------------------- * Mon Jan 29 2007 Matthias Clasen - 0.3.6-1 - Update to 0.3.6 - Apply a patch by Thorsten Leemhuis to fix some spec issues * Wed Oct 18 2006 Matthias Clasen - 0.3.5-8 - Fix scripts according to packaging guidelines * Tue Oct 17 2006 Matthias Clasen - 0.3.5-7 - Tighten up Requires (#203813) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ c0bf5e1f8ce8acf2b647483d9984ca836b097748 SRPMS/notification-daemon-0.3.6-1.fc6.src.rpm c0bf5e1f8ce8acf2b647483d9984ca836b097748 noarch/notification-daemon-0.3.6-1.fc6.src.rpm b184ffccfae8311162fd6c261b5fad57afe3463f ppc/notification-daemon-0.3.6-1.fc6.ppc.rpm 7991638c8d04aa425a2e7c2a101b30157eeeb671 ppc/debug/notification-daemon-debuginfo-0.3.6-1.fc6.ppc.rpm 1467daef905bd588da795473f4506749904d3d3b x86_64/notification-daemon-0.3.6-1.fc6.x86_64.rpm cf2ec3a63e0e9759bb8dadd6d6b7a4f9ec93433e x86_64/debug/notification-daemon-debuginfo-0.3.6-1.fc6.x86_64.rpm 5e952b1eaf4574c722cb7208c0783bbbbe6b7eac i386/debug/notification-daemon-debuginfo-0.3.6-1.fc6.i386.rpm 949de06200c4f5b9b706d2034970cb88dbca8814 i386/notification-daemon-0.3.6-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mbarnes at redhat.com Wed Jan 31 16:50:17 2007 From: mbarnes at redhat.com (Matthew Barnes) Date: Wed, 31 Jan 2007 11:50:17 -0500 Subject: Fedora Core 6 Test Update: gtkhtml3-3.12.3-1.fc6 Message-ID: <200701311650.l0VGoHKV029806@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-166 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gtkhtml3 Version : 3.12.3 Release : 1.fc6 Summary : gtkhtml library Description : GtkHTML is a lightweight HTML rendering/printing/editing engine. It was originally based on KHTMLW, but is now being developed independently of it. --------------------------------------------------------------------- Update Information: Update to the latest gtkhtml 3.12 release. --------------------------------------------------------------------- * Mon Jan 29 2007 Matthew Barnes - 3.12.3-1.fc6 - Update to 3.12.3 * Mon Nov 20 2006 Matthew Barnes - 3.12.2-1.fc6 - Update to 3.12.2 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ dc160576a95b27e750172eed3a2379544f1a21da SRPMS/gtkhtml3-3.12.3-1.fc6.src.rpm dc160576a95b27e750172eed3a2379544f1a21da noarch/gtkhtml3-3.12.3-1.fc6.src.rpm 6c0b1468c0cce53879270f145959614961628dea ppc/debug/gtkhtml3-debuginfo-3.12.3-1.fc6.ppc.rpm a61e8e709d6dda58a2b2339908dca9e2192830af ppc/gtkhtml3-3.12.3-1.fc6.ppc.rpm f904b8834ab411af6417ee5d676ce08a55206f45 ppc/gtkhtml3-devel-3.12.3-1.fc6.ppc.rpm a66aaaac13711935e28986aeb97cabdc89708977 x86_64/gtkhtml3-devel-3.12.3-1.fc6.x86_64.rpm 1288aef6873e2ee7e96877fd97df4651fd500448 x86_64/debug/gtkhtml3-debuginfo-3.12.3-1.fc6.x86_64.rpm 42dc3b979dfe35db89df4dab7160899285c013f8 x86_64/gtkhtml3-3.12.3-1.fc6.x86_64.rpm 22a21979376adfb836690c6faf0a9ba7cc99ce51 i386/gtkhtml3-devel-3.12.3-1.fc6.i386.rpm eea03fa232aff31ad358186337ee876f5be4b23f i386/debug/gtkhtml3-debuginfo-3.12.3-1.fc6.i386.rpm dd547f05701b17a47c100b5094f39cff7da24329 i386/gtkhtml3-3.12.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From chitlesh at fedoraproject.org Wed Jan 31 20:57:45 2007 From: chitlesh at fedoraproject.org (Chitlesh GOORAH) Date: Wed, 31 Jan 2007 21:57:45 +0100 Subject: Pup: Apply button went to drink coffee Message-ID: <13dbfe4f0701311257h2c0158fie5f46901a2ed48fe@mail.gmail.com> Hello there, I'm experiencing delays (10-15s) with the Apply button on rawhide KDE with Pup. As well on my other fc6 node, it has the same status. anyone else's experiencing it as well ? chitlesh -- http://clunixchit.blogspot.com From drago01 at gmail.com Wed Jan 31 21:20:13 2007 From: drago01 at gmail.com (dragoran) Date: Wed, 31 Jan 2007 22:20:13 +0100 Subject: Pup: Apply button went to drink coffee In-Reply-To: <13dbfe4f0701311257h2c0158fie5f46901a2ed48fe@mail.gmail.com> References: <13dbfe4f0701311257h2c0158fie5f46901a2ed48fe@mail.gmail.com> Message-ID: <45C1080D.8060000@gmail.com> Chitlesh GOORAH wrote: > Hello there, > > I'm experiencing delays (10-15s) with the Apply button on rawhide KDE > with Pup. As well on my other fc6 node, it has the same status. > > anyone else's experiencing it as well ? > same here... with fast machine and a fast connection (opteron 170/2gb ram and 6mbit) > chitlesh From mclasen at redhat.com Wed Jan 31 21:26:45 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:26:45 -0500 Subject: Fedora Core 6 Test Update: orca-1.0.1-1.fc6 Message-ID: <200701312126.l0VLQji3001059@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-167 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : orca Version : 1.0.1 Release : 1.fc6 Summary : Flexible, extensible, and powerful assistive technology Description : Orca is a flexible, extensible, and powerful assistive technology for people with visual impairments. Using various combinations of speech synthesis, braille, and magnification, Orca helps provide access to applications and toolkits that support the AT-SPI (e.g., the GNOME desktop). --------------------------------------------------------------------- Update Information: The latest stable upstream release of orca adds translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 1.0.1-1 - Update to 1.0.1 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 6af4ef45c4f6462c6d7e9d41d1dba77db7f261ba SRPMS/orca-1.0.1-1.fc6.src.rpm 6af4ef45c4f6462c6d7e9d41d1dba77db7f261ba noarch/orca-1.0.1-1.fc6.src.rpm 5f8b571b6aee648239323a8a5e45f3a5b56e5f72 ppc/debug/orca-debuginfo-1.0.1-1.fc6.ppc.rpm 757efad1dd04c33677ace2ed43c4ae3e6fba0697 ppc/orca-1.0.1-1.fc6.ppc.rpm bab5d4ec11855a7e34e39ca8edac26296050b60d x86_64/orca-1.0.1-1.fc6.x86_64.rpm b3db78555d0fc34f418f9644db3a5c2d45d9c2b8 x86_64/debug/orca-debuginfo-1.0.1-1.fc6.x86_64.rpm 350028d18df0c8119fb3b93558a6d0cf6baf91df i386/orca-1.0.1-1.fc6.i386.rpm fbe12e7625ea04d70ed86989e88108cef3315fe7 i386/debug/orca-debuginfo-1.0.1-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:27:51 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:27:51 -0500 Subject: Fedora Core 6 Test Update: gnome-games-2.16.3-2.fc6 Message-ID: <200701312127.l0VLRpFE001465@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-168 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-games Version : 2.16.3 Release : 2.fc6 Summary : GNOME games Description : The gnome-games package includes some small games that come with the GNOME desktop environment but can be used under any desktop. --------------------------------------------------------------------- Update Information: The latest stable upstream release of gnome-games contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 1:2.16.3-1 - Update to 2.16.3 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ dd579ed168043bc8261ba969cfeac8efed9bae16 SRPMS/gnome-games-2.16.3-2.fc6.src.rpm dd579ed168043bc8261ba969cfeac8efed9bae16 noarch/gnome-games-2.16.3-2.fc6.src.rpm e66787b196f215216a4df6fe443846403506c8ce ppc/gnome-games-2.16.3-2.fc6.ppc.rpm a87a73797b9754902ae67fec67bd631192f6025d ppc/debug/gnome-games-debuginfo-2.16.3-2.fc6.ppc.rpm d9493606d509a96ca91baff8cd0baa5343a06d47 x86_64/debug/gnome-games-debuginfo-2.16.3-2.fc6.x86_64.rpm 0bf69f82bbcf6b0f47b5463dc13e58aefc74d35a x86_64/gnome-games-2.16.3-2.fc6.x86_64.rpm 12f16ac6e2bfcd7dcc6fbba01f6763f3f153dec4 i386/gnome-games-2.16.3-2.fc6.i386.rpm 6e0a92dccc142be3b1ed37731edd40b8448a3ed9 i386/debug/gnome-games-debuginfo-2.16.3-2.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:29:04 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:29:04 -0500 Subject: Fedora Core 6 Test Update: gdm-2.16.5-1.fc6 Message-ID: <200701312129.l0VLT4QR001965@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-169 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gdm Version : 2.16.5 Release : 1.fc6 Summary : The GNOME Display Manager Description : Gdm (the GNOME Display Manager) is a highly configurable reimplementation of xdm, the X Display Manager. Gdm allows you to log into your system with the X Window System running and supports running several different X sessions on your local machine at the same time. --------------------------------------------------------------------- Update Information: The latest stable upstream release of gdm contains minor bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 1:2.16.5-1 - Update to 2.16.5 * Fri Dec 15 2006 Matthias Clasen - 1:2.16.4-1.fc6 - Update to 2.16.4, which fixes CVE-2006-6105 - Update patches - Drop upstreamed patches --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ b0cf805b84871881df3eb7b77654b5fa466a2b9f SRPMS/gdm-2.16.5-1.fc6.src.rpm b0cf805b84871881df3eb7b77654b5fa466a2b9f noarch/gdm-2.16.5-1.fc6.src.rpm d9bd21b0471e9009a5d2a27f91d6c31f850860eb ppc/debug/gdm-debuginfo-2.16.5-1.fc6.ppc.rpm 22e344378701205358d1e92448c3351b1c08a220 ppc/gdm-2.16.5-1.fc6.ppc.rpm 7628a64d958f8a1f3d6e2b09451aaf3463ae1157 x86_64/gdm-2.16.5-1.fc6.x86_64.rpm cb1c5e7211d028b9fb5fd094f2eb000a512ba9ba x86_64/debug/gdm-debuginfo-2.16.5-1.fc6.x86_64.rpm 8bbd3a5e1174ab76b6da04be7e98c00dd1986671 i386/gdm-2.16.5-1.fc6.i386.rpm 771029704b7e21e23ccbecab6d5766b749c5aeaa i386/debug/gdm-debuginfo-2.16.5-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:30:12 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:30:12 -0500 Subject: Fedora Core 6 Test Update: gnome-mag-0.13.2-1.fc6 Message-ID: <200701312130.l0VLUCkA002504@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-170 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-mag Version : 0.13.2 Release : 1.fc6 Summary : GNOME Magnifier Description : Magnification library for AT-SPI based apps. --------------------------------------------------------------------- Update Information: The latest stable upstream release of gnome-mag contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 0.13.2-1 - Update to 0.13.2 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 3b550d9a4b75e7087e716acfb73664ae7517c784 SRPMS/gnome-mag-0.13.2-1.fc6.src.rpm 3b550d9a4b75e7087e716acfb73664ae7517c784 noarch/gnome-mag-0.13.2-1.fc6.src.rpm 6c38b769a937ba3a42a62994f124850963de510e ppc/debug/gnome-mag-debuginfo-0.13.2-1.fc6.ppc.rpm 71ff7c82bf5ae4ddbd0c4d2cb947609a648ad6b4 ppc/gnome-mag-devel-0.13.2-1.fc6.ppc.rpm 31806660ee94c7794ac6690a8c54289b1d1618ad ppc/gnome-mag-0.13.2-1.fc6.ppc.rpm ca47f6615bb51a47ff6133336d1cd8aa955698d3 x86_64/debug/gnome-mag-debuginfo-0.13.2-1.fc6.x86_64.rpm bae66b96a797ef9b63697680bf86c28b14405ec2 x86_64/gnome-mag-0.13.2-1.fc6.x86_64.rpm 6928e63322509f3dff4da3ec844c4780f1c290fd x86_64/gnome-mag-devel-0.13.2-1.fc6.x86_64.rpm 347f22ad45c09554bbac2b52a52cb76b7583b212 i386/gnome-mag-0.13.2-1.fc6.i386.rpm 5891e744a7db85680f837e1c0f9d69d79bbf0e51 i386/gnome-mag-devel-0.13.2-1.fc6.i386.rpm 80f43b67b30c702e0d5b4f96f3791928d1326386 i386/debug/gnome-mag-debuginfo-0.13.2-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:31:21 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:31:21 -0500 Subject: Fedora Core 6 Test Update: sound-juicer-2.16.3-1.fc6 Message-ID: <200701312131.l0VLVLnj003039@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-171 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : sound-juicer Version : 2.16.3 Release : 1.fc6 Summary : Clean and lean CD ripper Description : GStreamer-based CD ripping tool. Saves audio CDs to Ogg/vorbis. --------------------------------------------------------------------- Update Information: The latest stable upstream release of sound-juicer contains some bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 * Wed Oct 18 2006 Matthias Clasen - 2.16.0-2 - Fix scripts according to the packaging guidelines --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ a08515b394e45a070565022f13fb37935a871df9 SRPMS/sound-juicer-2.16.3-1.fc6.src.rpm a08515b394e45a070565022f13fb37935a871df9 noarch/sound-juicer-2.16.3-1.fc6.src.rpm 0959dacfd0a2eb9d68a57b6eecf731cf3077fb42 ppc/debug/sound-juicer-debuginfo-2.16.3-1.fc6.ppc.rpm 094004525cb9ba1d9b05b8f3520b293b91f7ea67 ppc/sound-juicer-2.16.3-1.fc6.ppc.rpm 54eaf18b4e7311d8224806cf7d0ce3de8a20e444 x86_64/debug/sound-juicer-debuginfo-2.16.3-1.fc6.x86_64.rpm 7784e637dc8be426b14ef38f1921a0ca5e7cb38b x86_64/sound-juicer-2.16.3-1.fc6.x86_64.rpm c5b6b7061c7ad8b3027b82626cca9d8b29066025 i386/sound-juicer-2.16.3-1.fc6.i386.rpm 8955b34425d9372e060dba548447c938a680185a i386/debug/sound-juicer-debuginfo-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:32:30 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:32:30 -0500 Subject: Fedora Core 6 Test Update: zenity-2.16.3-1.fc6 Message-ID: <200701312132.l0VLWUJ3003468@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-172 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : zenity Version : 2.16.3 Release : 1.fc6 Summary : Display dialog boxes from shell scripts Description : Zenity lets you display Gtk+ dialog boxes from the command line and through shell scripts. It is similar to gdialog, but is intended to be saner. It comes from the same family as dialog, Xdialog, and cdialog. --------------------------------------------------------------------- Update Information: The latest stable upstream release of zenity contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ aff4bcef3333f8cf0aa406458840aa279b92083a SRPMS/zenity-2.16.3-1.fc6.src.rpm aff4bcef3333f8cf0aa406458840aa279b92083a noarch/zenity-2.16.3-1.fc6.src.rpm 5e8d664203eda391873fb36796c101f1a5d56e6d ppc/debug/zenity-debuginfo-2.16.3-1.fc6.ppc.rpm 5c4a7a8e5c2b0e44207f71493ecfc67b92f3a520 ppc/zenity-2.16.3-1.fc6.ppc.rpm 19c02ff08cc955665b4f3e6dd8f95381c891f158 x86_64/debug/zenity-debuginfo-2.16.3-1.fc6.x86_64.rpm aced2aacf51e0e2fda51208ff2127019e678b1e1 x86_64/zenity-2.16.3-1.fc6.x86_64.rpm d3ecfa94113979701958d1c27c226da55c925310 i386/zenity-2.16.3-1.fc6.i386.rpm 02e837873d56a015407f112024a8d6597a0d5066 i386/debug/zenity-debuginfo-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:33:50 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:33:50 -0500 Subject: Fedora Core 6 Test Update: eog-2.16.3-1.fc6 Message-ID: <200701312133.l0VLXoMg004069@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-173 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : eog Version : 2.16.3 Release : 1.fc6 Summary : Eye of GNOME image viewer Description : Eye of GNOME (EOG) is an image viewer. --------------------------------------------------------------------- Update Information: The latest stable upstream release of eog contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 * Wed Oct 18 2006 Matthias Clasen - 2.16.0.1-3 - Fix scripts according to the packaging guidelines --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ b2c6446feae2334ffe15b2ac6d121322d8d2844b SRPMS/eog-2.16.3-1.fc6.src.rpm b2c6446feae2334ffe15b2ac6d121322d8d2844b noarch/eog-2.16.3-1.fc6.src.rpm 56c383a8125becff8a5f8117cc7c6c12efc6999a ppc/eog-2.16.3-1.fc6.ppc.rpm 6585f34e9bbe60c673f8ed0541cc9d7b539332ae ppc/debug/eog-debuginfo-2.16.3-1.fc6.ppc.rpm 94a5b0666668a11ece3cb62688beb2bea52ffea2 x86_64/debug/eog-debuginfo-2.16.3-1.fc6.x86_64.rpm 3a303041ccfd9f7ec2acfb1d885e64e318d58d35 x86_64/eog-2.16.3-1.fc6.x86_64.rpm 5c02e92de7c025b5437fc7aaa8fb9da837c00055 i386/debug/eog-debuginfo-2.16.3-1.fc6.i386.rpm 5f69af156d51009c61fff88bef92818083777cbd i386/eog-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:34:58 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:34:58 -0500 Subject: Fedora Core 6 Test Update: gnome-themes-2.16.3-1.fc6 Message-ID: <200701312134.l0VLYwKv004523@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-174 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-themes Version : 2.16.3 Release : 1.fc6 Summary : Themes collection for GNOME Description : Themes collection for GNOME --------------------------------------------------------------------- Update Information: The latest stable upstream release of gnome-themes contains updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ b6cdb42a813e1d09bbdf875dd71ea72d237d8e9e SRPMS/gnome-themes-2.16.3-1.fc6.src.rpm b6cdb42a813e1d09bbdf875dd71ea72d237d8e9e noarch/gnome-themes-2.16.3-1.fc6.src.rpm e7f27a0bca701709b027a33b0c9ea314d2bf3bcb ppc/gnome-themes-2.16.3-1.fc6.noarch.rpm e7f27a0bca701709b027a33b0c9ea314d2bf3bcb x86_64/gnome-themes-2.16.3-1.fc6.noarch.rpm e7f27a0bca701709b027a33b0c9ea314d2bf3bcb i386/gnome-themes-2.16.3-1.fc6.noarch.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:36:31 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:36:31 -0500 Subject: Fedora Core 6 Test Update: metacity-2.16.5-1.fc6 Message-ID: <200701312136.l0VLaV6m005182@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-175 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : metacity Version : 2.16.5 Release : 1.fc6 Summary : Metacity window manager Description : Metacity is a simple window manager that integrates nicely with GNOME 2. --------------------------------------------------------------------- Update Information: The latest stable upstream release of metacity contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.5-1 - Update to 2.16.5 - Drop upstreamed patches * Wed Oct 18 2006 Matthias Clasen - 2.16.0-7 - Fix scripts according to packaging guidelines * Tue Oct 17 2006 Matthias Clasen - 2.16.0-6 - Add missing Requires (#203813) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ d227e5841657924308853d936b46f6c918c40ecc SRPMS/metacity-2.16.5-1.fc6.src.rpm d227e5841657924308853d936b46f6c918c40ecc noarch/metacity-2.16.5-1.fc6.src.rpm 661f669332318f68c56223b465fe3ee2a66d046e ppc/metacity-2.16.5-1.fc6.ppc.rpm 40450885256b77efa3f4854ab31e7747e1f1b5ac ppc/debug/metacity-debuginfo-2.16.5-1.fc6.ppc.rpm dfe20cd2694dd4c2c2373afc76735899b9f44843 x86_64/metacity-2.16.5-1.fc6.x86_64.rpm a9d2e367dbb3ad464f7ad338c6f8c594dc6b7729 x86_64/debug/metacity-debuginfo-2.16.5-1.fc6.x86_64.rpm 5f5d3a22addb5225ef06638a2c8b5cf4a19ea61e i386/debug/metacity-debuginfo-2.16.5-1.fc6.i386.rpm 859346d94c18534df5957169689b9af8cdad5a98 i386/metacity-2.16.5-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:37:44 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:37:44 -0500 Subject: Fedora Core 6 Test Update: file-roller-2.16.3-1.fc6 Message-ID: <200701312137.l0VLbi4U005661@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-176 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : file-roller Version : 2.16.3 Release : 1.fc6 Summary : File Roller is a tool for viewing and creating archives Description : File Roller is an application for creating and viewing archives files, such as tar files. --------------------------------------------------------------------- Update Information: The latest stable upstream release of file-roller contains updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ ce813f936cf6eb475ac7c9a32a4ddb49ed25c983 SRPMS/file-roller-2.16.3-1.fc6.src.rpm ce813f936cf6eb475ac7c9a32a4ddb49ed25c983 noarch/file-roller-2.16.3-1.fc6.src.rpm 6dec19f461dc065087121eec5f60e75800570958 ppc/file-roller-2.16.3-1.fc6.ppc.rpm a5e628e514e1a7c77c92c3e330b2b8af0966962f ppc/debug/file-roller-debuginfo-2.16.3-1.fc6.ppc.rpm b6dd7efe1d39c2f715c7d5e55ca45b2dcc7d0eb4 x86_64/debug/file-roller-debuginfo-2.16.3-1.fc6.x86_64.rpm 33680bd46a57eae480e8ba8e9e92d021bdae9761 x86_64/file-roller-2.16.3-1.fc6.x86_64.rpm ac1279c31e8e86a4ca84c06e2b8f3d5733b218de i386/file-roller-2.16.3-1.fc6.i386.rpm 4271a24079630b7e288043de3eda6d11bd1b8e22 i386/debug/file-roller-debuginfo-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:38:55 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:38:55 -0500 Subject: Fedora Core 6 Test Update: nautilus-cd-burner-2.16.3-1.fc6 Message-ID: <200701312138.l0VLctgX005999@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-177 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : nautilus-cd-burner Version : 2.16.3 Release : 1.fc6 Summary : Easy to use CD burning for Gnome Description : An easy to use CD burning package, well integrated with Nautilus and the Gnome desktop. --------------------------------------------------------------------- Update Information: The latest stable upstream release of nautilus-cd-burner contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 - Drop obsolete patches * Tue Nov 28 2006 Alexander Larsson - 2.16.0-6 - Backport bugfixes from 2.16.2: - * Limit number of speeds listed - * allow burning of application/x-cdrdao-toc files - * Make burn from image work - Silence post scripts --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ c7226d7de481d9c988b1a34a741c0f7c659ee392 SRPMS/nautilus-cd-burner-2.16.3-1.fc6.src.rpm c7226d7de481d9c988b1a34a741c0f7c659ee392 noarch/nautilus-cd-burner-2.16.3-1.fc6.src.rpm 78b65fd73a7f9b96ce09b162eb523edbed2b2904 ppc/nautilus-cd-burner-devel-2.16.3-1.fc6.ppc.rpm 2ad3a8e5fcd5f9d71273afc3b68cb5c2df4e30ea ppc/nautilus-cd-burner-2.16.3-1.fc6.ppc.rpm 07494a2b1305ae9c6aa6a82f295cd2127acc61d3 ppc/debug/nautilus-cd-burner-debuginfo-2.16.3-1.fc6.ppc.rpm b1d7511e358d77e4ba377bf1bf79c139194060ca x86_64/nautilus-cd-burner-devel-2.16.3-1.fc6.x86_64.rpm 14f5aa140b7750f8c1c791c412fb23c77177d38c x86_64/nautilus-cd-burner-2.16.3-1.fc6.x86_64.rpm d45468d53a03dde00329c36684b5307262cd263e x86_64/debug/nautilus-cd-burner-debuginfo-2.16.3-1.fc6.x86_64.rpm c1a04e755d2430e0638925e613db0967a7ea281b i386/debug/nautilus-cd-burner-debuginfo-2.16.3-1.fc6.i386.rpm 18e2dd17c25c343d9dd58cfcf2a923eb1c9c5ff9 i386/nautilus-cd-burner-devel-2.16.3-1.fc6.i386.rpm df287425a51fbccbbb4945e91fef0d80a7a46c39 i386/nautilus-cd-burner-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:40:15 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:40:15 -0500 Subject: Fedora Core 6 Test Update: pango-1.14.10-1.fc6 Message-ID: <200701312140.l0VLeFJD006582@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-178 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : pango Version : 1.14.10 Release : 1.fc6 Summary : System for layout and rendering of internationalized text Description : Pango is a system for layout and rendering of internationalized text. --------------------------------------------------------------------- Update Information: The latest stable upstream release of pango fixes several bugs. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 1.14.10-1 - Update to 1.14.10 * Thu Dec 7 2006 Behdad Esfahbod - 1.14.9-1 - Update to 1.14.9 - Resolves: #216424, #216850, #211964, #213632 - Add Thai language engine. (disabled, since there's no libthai) * Mon Nov 20 2006 Behdad Esfahbod - 1.14.8-1 - Update to 1.14.8 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 8bac36887779734017e52d872701d3477287957f SRPMS/pango-1.14.10-1.fc6.src.rpm 8bac36887779734017e52d872701d3477287957f noarch/pango-1.14.10-1.fc6.src.rpm 24bef98a8c2f8acfd278e022f3e2384a2dac2c85 ppc/pango-devel-1.14.10-1.fc6.ppc.rpm ee275fe9108a9f9ccfe553ef21df9fcd93fdc7aa ppc/debug/pango-debuginfo-1.14.10-1.fc6.ppc.rpm a9e258f85402f8e98df5e7fa752fc7cc90d654db ppc/pango-1.14.10-1.fc6.ppc.rpm e6601529c926188a6099a7b08b241426958c744a x86_64/pango-devel-1.14.10-1.fc6.x86_64.rpm 251c6fa5f4e0789459ce3eb60e95bf234b41adda x86_64/pango-1.14.10-1.fc6.x86_64.rpm 5173e50fb0326066c74ee93ace9f77eb4af8a413 x86_64/debug/pango-debuginfo-1.14.10-1.fc6.x86_64.rpm 97aaeb7086b38895b5a1174128177c7777de193b i386/debug/pango-debuginfo-1.14.10-1.fc6.i386.rpm eef19d2adbc2ee7abaace5a2b4eb7e4ff799ba8b i386/pango-devel-1.14.10-1.fc6.i386.rpm 783f27df5d5ffe07c4c14a11df3410175f40c73a i386/pango-1.14.10-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:41:57 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:41:57 -0500 Subject: Fedora Core 6 Test Update: gnome-power-manager-2.16.3-1.fc6 Message-ID: <200701312141.l0VLfvPh007018@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-179 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-power-manager Version : 2.16.3 Release : 1.fc6 Summary : GNOME Power Manager Description : GNOME Power Manager uses the information and facilities provided by HAL displaying icons and handling user callbacks in an interactive GNOME session. GNOME Power Preferences allows authorised users to set policy and change preferences. --------------------------------------------------------------------- Update Information: The latest stable upstream release of gnome-power-manager contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 - Drop upstreamed patch * Mon Nov 27 2006 Ray Strode - 2.16.0-4.fc6 - fix screensaver from going blank even when configured to show a screensaver (bug 216045) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 824876c924050e4e566371200b6f60080b60d2d8 SRPMS/gnome-power-manager-2.16.3-1.fc6.src.rpm 824876c924050e4e566371200b6f60080b60d2d8 noarch/gnome-power-manager-2.16.3-1.fc6.src.rpm 637a8db3ed28d3ed377ef1b8e26785ca66425d6f ppc/gnome-power-manager-2.16.3-1.fc6.ppc.rpm bbd8d248cf42ef8b2624d2f32eb7bd80f04d3638 ppc/debug/gnome-power-manager-debuginfo-2.16.3-1.fc6.ppc.rpm 724a009ad9527185d3ab8f8369ce6ebde6f2ed35 x86_64/gnome-power-manager-2.16.3-1.fc6.x86_64.rpm 4fea136856b47648b850529fa12abe474ad071d4 x86_64/debug/gnome-power-manager-debuginfo-2.16.3-1.fc6.x86_64.rpm 7d7d1e93c0f97decd6a54527acfabea2681f07ea i386/gnome-power-manager-2.16.3-1.fc6.i386.rpm 40b34b24cb7d66140fefd52452e340baf0648790 i386/debug/gnome-power-manager-debuginfo-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:43:10 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:43:10 -0500 Subject: Fedora Core 6 Test Update: vte-0.14.2-1.fc6 Message-ID: <200701312143.l0VLhAEO007397@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-180 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : vte Version : 0.14.2 Release : 1.fc6 Summary : A terminal emulator Description : VTE is a terminal emulator widget for use with GTK+ 2.0. --------------------------------------------------------------------- Update Information: The latest stable upstream release of vte fixes several bugs. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen 0.14.2-1 - Update to 0.14.2 - Drop obsolete patch * Fri Dec 8 2006 Behdad Esfahbod 0.14.1-1 - Update to 0.14.1 - Add gnome-pty-helper-hostaddress-garbage.patch - Resolves: #218626 * Tue Oct 17 2006 Behdad Esfahbod 0.14.0-3 - Step revision up cause I tagged wrong the other time * Tue Oct 17 2006 Behdad Esfahbod 0.14.0-2 - Do not require bitmap-fonts --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ b673e969c961a0199196eba4252a2ac7a6bb28cc SRPMS/vte-0.14.2-1.fc6.src.rpm b673e969c961a0199196eba4252a2ac7a6bb28cc noarch/vte-0.14.2-1.fc6.src.rpm e854ae994912b77da0266c6a00b8d6d028103ea6 ppc/vte-0.14.2-1.fc6.ppc.rpm 78995b0da68384b26981818f56c9976ce194eb15 ppc/debug/vte-debuginfo-0.14.2-1.fc6.ppc.rpm 08b256538c5673d1ac83f1874b326f3fae57d905 ppc/vte-devel-0.14.2-1.fc6.ppc.rpm c87c18f78e8f484756f01a33f540699aa8c433f9 x86_64/vte-0.14.2-1.fc6.x86_64.rpm a6df3e0933f04a365ebad312e5c8f6b143ea859f x86_64/vte-devel-0.14.2-1.fc6.x86_64.rpm 24d14e2c6654b545900a87375ff455fc7eb0d625 x86_64/debug/vte-debuginfo-0.14.2-1.fc6.x86_64.rpm cc18f899caa0cfd5c8d6bf599154be86d68959d7 i386/vte-0.14.2-1.fc6.i386.rpm 1cfba93d46e27f05b461d3f76988dd49ba4f2609 i386/vte-devel-0.14.2-1.fc6.i386.rpm 00ac7c6e43b4306b086b61f1f48a40a84b213b02 i386/debug/vte-debuginfo-0.14.2-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:44:23 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:44:23 -0500 Subject: Fedora Core 6 Test Update: gnome-panel-2.16.3-1.fc6 Message-ID: <200701312144.l0VLiN9b007701@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-181 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-panel Version : 2.16.3 Release : 1.fc6 Summary : GNOME panel Description : The GNOME panel provides the window list, workspace switcher, menus, and other features for the GNOME desktop. --------------------------------------------------------------------- Update Information: The latest stable upstream release of gnome-panel contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 * Thu Nov 16 2006 Matthias Clasen - 2.16.1-3 - Fix previous patch and also include the fix for gnome bug 359707 * Tue Nov 14 2006 Matthias Clasen - 2.16.1-2 - Fix copying of launchers by DND, bug 214334 - fix "Add this launcher to panel" chinese translation. Patch by Caius Chance (bug 211569) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 35cd9eaf26c0dbd5a02a3a373c522bc2eb01c88b SRPMS/gnome-panel-2.16.3-1.fc6.src.rpm 35cd9eaf26c0dbd5a02a3a373c522bc2eb01c88b noarch/gnome-panel-2.16.3-1.fc6.src.rpm 27bfd07d4aeddb12065ea13dff15ed4b4ec5d389 ppc/gnome-panel-devel-2.16.3-1.fc6.ppc.rpm b37bd76ba1cc4f5cd2c86d845c53440bad62b089 ppc/debug/gnome-panel-debuginfo-2.16.3-1.fc6.ppc.rpm f007dfadd476874c2d83189ba151c84be6502286 ppc/gnome-panel-2.16.3-1.fc6.ppc.rpm fd20c6a157c1e623f8078a0559f6431c83d7f1d2 x86_64/gnome-panel-devel-2.16.3-1.fc6.x86_64.rpm 416734e5296a3b662089b85948df768a123c7cb2 x86_64/debug/gnome-panel-debuginfo-2.16.3-1.fc6.x86_64.rpm 493a4f448dde1b100740c71eed0499b717804b10 x86_64/gnome-panel-2.16.3-1.fc6.x86_64.rpm 3a3686a2874c419daa16d3907df01ee013b351a8 i386/debug/gnome-panel-debuginfo-2.16.3-1.fc6.i386.rpm 541c06eb70141fe5ccb8f0a36c96d163ac378ef6 i386/gnome-panel-2.16.3-1.fc6.i386.rpm 8caeae72fa8eca44ed5b7ecbd77ebc3dab2e75e6 i386/gnome-panel-devel-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:45:34 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:45:34 -0500 Subject: Fedora Core 6 Test Update: gnome-desktop-2.16.3-1.fc6 Message-ID: <200701312145.l0VLjYcB008241@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-182 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-desktop Version : 2.16.3 Release : 1.fc6 Summary : Package containing code shared among gnome-panel, gnome-session, nautilus, etc Description : The gnome-desktop package contains an internal library (libgnomedesktop) used to implement some portions of the GNOME desktop, and also some data files and other shared components of the GNOME user environment. --------------------------------------------------------------------- Update Information: The latest stable upstream release of gnome-desktop fixes several bugs. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 140bebc15c6256665dee58f67aef1d2e35c79201 SRPMS/gnome-desktop-2.16.3-1.fc6.src.rpm 140bebc15c6256665dee58f67aef1d2e35c79201 noarch/gnome-desktop-2.16.3-1.fc6.src.rpm 4d67a6ade7b102b07a5bcf870bed547c901e8e89 ppc/debug/gnome-desktop-debuginfo-2.16.3-1.fc6.ppc.rpm 77017b4e43157aa552de243aae96ce8a89feace7 ppc/gnome-desktop-devel-2.16.3-1.fc6.ppc.rpm 463545fadadca262eb2991dc75d3280a1c1825e6 ppc/gnome-desktop-2.16.3-1.fc6.ppc.rpm 5a2bc12246e50e58194bb344df7645deb2224482 x86_64/debug/gnome-desktop-debuginfo-2.16.3-1.fc6.x86_64.rpm f40d8e3fa3f81ebdf8038dd06941af61036c4ab5 x86_64/gnome-desktop-2.16.3-1.fc6.x86_64.rpm 840e317a4b2c726ce58a29f606681a514e101078 x86_64/gnome-desktop-devel-2.16.3-1.fc6.x86_64.rpm 02f4b38a9eccf8298eb1471e627c248061f04431 i386/gnome-desktop-devel-2.16.3-1.fc6.i386.rpm 67cc6fbd772251e5999108f9e5ceea054afc86d9 i386/debug/gnome-desktop-debuginfo-2.16.3-1.fc6.i386.rpm b7b3a1ace1a555213634b2ee590861d1808a5539 i386/gnome-desktop-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:46:46 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:46:46 -0500 Subject: Fedora Core 6 Test Update: libwnck-2.16.3-1.fc6 Message-ID: <200701312146.l0VLkkfe008579@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-183 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : libwnck Version : 2.16.3 Release : 1.fc6 Summary : Window Navigator Construction Kit Description : libwnck (pronounced "libwink") is used to implement pagers, tasklists, and other such things. It allows applications to monitor information about open windows, workspaces, their names/icons, and so forth. --------------------------------------------------------------------- Update Information: The latest stable upstream release of libwnck contains updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 646e547901c2b727e46976ad7e86f4ac06fa8189 SRPMS/libwnck-2.16.3-1.fc6.src.rpm 646e547901c2b727e46976ad7e86f4ac06fa8189 noarch/libwnck-2.16.3-1.fc6.src.rpm b76944681c581dae9e3b660a070a012996f6bbaf ppc/debug/libwnck-debuginfo-2.16.3-1.fc6.ppc.rpm 3e3a701c769bcc8c8cb190fa15079660de5520a6 ppc/libwnck-2.16.3-1.fc6.ppc.rpm d6bb57145fe9e6bf5f8a9edb36b49239ded0eb76 ppc/libwnck-devel-2.16.3-1.fc6.ppc.rpm 03bdd49cc6d935a41d434ee38d1423b6cbf4ab7d x86_64/debug/libwnck-debuginfo-2.16.3-1.fc6.x86_64.rpm b15328c2c5c1a137c0d3f10df8be79b19cadd15b x86_64/libwnck-devel-2.16.3-1.fc6.x86_64.rpm 66ed6e3d64104a7263d0a39c8394057899bb18c7 x86_64/libwnck-2.16.3-1.fc6.x86_64.rpm db60d6a6f13b6f0dfe81eb7d78612c21123dbe7b i386/debug/libwnck-debuginfo-2.16.3-1.fc6.i386.rpm 2219a72d67e4c2d5b9f8ed5add2d26429cd29ec4 i386/libwnck-2.16.3-1.fc6.i386.rpm 42a9f90e4ffd85889c4dd1cceb1b57554c410c90 i386/libwnck-devel-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:48:03 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:48:03 -0500 Subject: Fedora Core 6 Test Update: gnome-session-2.16.3-1.fc6 Message-ID: <200701312148.l0VLm3ox009094@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-184 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : gnome-session Version : 2.16.3 Release : 1.fc6 Summary : GNOME session manager Description : gnome-session manages a GNOME desktop session. It starts up the other core GNOME components and handles logout and saving the session. --------------------------------------------------------------------- Update Information: The latest stable upstream release of gnome-session contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 * Mon Nov 27 2006 Ray Strode - 2.16.1-7.fc6 - don't set http_proxy variable if proxy requires password (bug 217332) * Mon Nov 20 2006 Ray Strode - 2.16.1-6.fc6 - strip +x permissions from gnome.desktop (bug 196105) * Thu Oct 26 2006 Ray Strode - 2.16.1-5.fc6 - don't hose users with a stale http_proxy variable if they use autoconfiguration and used to use manual configuration. Patch by Mark McLoughlin (bug 212319) * Wed Oct 18 2006 Matthias Clasen - 2.16.0-4 - Fix scripts according to the packaging guidelines --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 14e316f2cf089d0e7967a400cecc55db2e0453dc SRPMS/gnome-session-2.16.3-1.fc6.src.rpm 14e316f2cf089d0e7967a400cecc55db2e0453dc noarch/gnome-session-2.16.3-1.fc6.src.rpm a4a3e146a48936ae72a99cbafdfb22a9d741f990 ppc/debug/gnome-session-debuginfo-2.16.3-1.fc6.ppc.rpm 6b51041b6ff382e875d8e2ed58ce6055aadc2d8f ppc/gnome-session-2.16.3-1.fc6.ppc.rpm 6274d0861fd38686ed13348621f9e938b358e1a6 x86_64/debug/gnome-session-debuginfo-2.16.3-1.fc6.x86_64.rpm 339fbf4e74b882fec65df054c9d117678c20f6fb x86_64/gnome-session-2.16.3-1.fc6.x86_64.rpm 4f0ba5edecfa2f43df311cee7077652ce3179114 i386/gnome-session-2.16.3-1.fc6.i386.rpm 0afb183a66640aadb71d489287257ed274d62314 i386/debug/gnome-session-debuginfo-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From mclasen at redhat.com Wed Jan 31 21:49:25 2007 From: mclasen at redhat.com (Matthias Clasen) Date: Wed, 31 Jan 2007 16:49:25 -0500 Subject: Fedora Core 6 Test Update: epiphany-2.16.3-1.fc6 Message-ID: <200701312149.l0VLnPLk009586@int-mx1.corp.redhat.com> --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2007-185 2007-01-31 --------------------------------------------------------------------- Product : Fedora Core 6 Name : epiphany Version : 2.16.3 Release : 1.fc6 Summary : GNOME web browser based on the Mozilla rendering engine Description : epiphany is a simple GNOME web browser based on the Mozilla rendering engine --------------------------------------------------------------------- Update Information: The latest stable upstream version of epiphany contains bug fixes and updated translations. --------------------------------------------------------------------- * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 - Update to 2.16.3 * Wed Dec 20 2006 Christopher Aillon - 2.16.2-1 - Update to 2.16.2 * Tue Dec 19 2006 Christopher Aillon - 2.16.0-6.fc6 - Rebuild against newer gecko --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/6/ 31dde9b37a2feeed6fc301724fb6c7e82166f605 SRPMS/epiphany-2.16.3-1.fc6.src.rpm 31dde9b37a2feeed6fc301724fb6c7e82166f605 noarch/epiphany-2.16.3-1.fc6.src.rpm e8a072fcc332cea9917756fb63034591f63529dd ppc/debug/epiphany-debuginfo-2.16.3-1.fc6.ppc.rpm 854d0990b526948d04fbc653a5adc4ca6ebcd857 ppc/epiphany-devel-2.16.3-1.fc6.ppc.rpm 96007509bb728413c25fd61557d5ebcc1351573e ppc/epiphany-2.16.3-1.fc6.ppc.rpm 5d57f0ae2eb0fe146b020d1e96ededf01ebeb8c3 x86_64/debug/epiphany-debuginfo-2.16.3-1.fc6.x86_64.rpm 53ed0d40e9f527ea3c13f0955b3a2cdb9a77b930 x86_64/epiphany-2.16.3-1.fc6.x86_64.rpm e89ea307469243a613789c67706c014041ea1166 x86_64/epiphany-devel-2.16.3-1.fc6.x86_64.rpm c5912d487287a4bc5acb0a93349293af27a62261 i386/epiphany-2.16.3-1.fc6.i386.rpm 94d6fd7ab226f2f637da417389af3881303cc6ef i386/epiphany-devel-2.16.3-1.fc6.i386.rpm 719cdca9e762ae9ebb08b4e2581e56571d04f91d i386/debug/epiphany-debuginfo-2.16.3-1.fc6.i386.rpm This update can be installed with the 'yum' update program. Use 'yum update package-name' at the command line. For more information, refer to 'Managing Software with yum,' available at http://fedora.redhat.com/docs/yum/. --------------------------------------------------------------------- From drago01 at gmail.com Wed Jan 31 22:20:16 2007 From: drago01 at gmail.com (dragoran) Date: Wed, 31 Jan 2007 23:20:16 +0100 Subject: Fedora Core 6 Test Update: libwnck-2.16.3-1.fc6 In-Reply-To: <200701312146.l0VLkkfe008579@int-mx1.corp.redhat.com> References: <200701312146.l0VLkkfe008579@int-mx1.corp.redhat.com> Message-ID: <45C11620.1050500@gmail.com> Matthias Clasen wrote: > --------------------------------------------------------------------- > Fedora Test Update Notification > FEDORA-2007-183 > 2007-01-31 > --------------------------------------------------------------------- > > Product : Fedora Core 6 > Name : libwnck > Version : 2.16.3 > Release : 1.fc6 > Summary : Window Navigator Construction Kit > Description : > > libwnck (pronounced "libwink") is used to implement pagers, tasklists, > and other such things. It allows applications to monitor information > about open windows, workspaces, their names/icons, and so forth. > > --------------------------------------------------------------------- > Update Information: > > The latest stable upstream release of libwnck contains > updated translations. > --------------------------------------------------------------------- > * Wed Jan 31 2007 Matthias Clasen - 2.16.3-1 > - Update to 2.16.3 > > --------------------------------------------------------------------- > Is it possible to add the compiz patches from http://bugzilla.gnome.org/show_bug.cgi?id=352383 at last the "always on top patch" ? I am using this one without any problems (and its a simple patch too)