Mounting USB drives under rawhide
dragoran
drago01 at gmail.com
Mon Jan 1 14:53:07 UTC 2007
Paul wrote:
> Hi,
>
> Okay, I give up. I'm running the current rawhide kernel on an x86_64 box
> and I can't get anything other than the laser printer to be recognised
> when I hot plug them in.
>
> What device name do I need to use to mount them by hand?
>
> /dev shows the following usb points
>
> /dev/usbdev1.1_ep00
> /dev/usbdev1.1_ep81
> /dev/usbdev2.1_ep00
> /dev/usbdev2.1_ep81
> /dev/usbdev2.2_ep00
> /dev/usbdev2.2_ep01
> /dev/usbdev2.2_ep82
> /dev/usbdev2.7_ep00
> /dev/usbdev2.7_ep02
> /dev/usbdev2.7_ep81
> /dev/usbdev3.1_ep00
> /dev/usbdev3.1_ep81
>
> /dev/usb:
> lp0
>
> /proc/bus/usb/devices comes up with the following
>
>
> T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
> B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.19-1.2891.fc7 ehci_hcd
> S: Product=EHCI Host Controller
> S: SerialNumber=0000:00:02.2
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.19-1.2891.fc7 ohci_hcd
> S: Product=OHCI Host Controller
> S: SerialNumber=0000:00:02.1
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=55aa ProdID=b012 Rev= 1.01
> S: Manufacturer=
> S: Product=8-in-2
> S: SerialNumber=D8C1CC9553
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
> E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
> T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 7 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=03f0 ProdID=3004 Rev= 1.00
> S: Manufacturer=Hewlett-Packard
> S: Product=DeskJet 980C
> S: SerialNumber=ES16B190F0OF
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.19-1.2891.fc7 ohci_hcd
> S: Product=OHCI Host Controller
> S: SerialNumber=0000:00:02.0
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> If I try to mount (say) /dev/usbdev3.1_ep81 I get an error saying it's
> not a block device.
>
> I really need to be able to mount USB devices, so any help would be
> appreciated.
>
> kernel : 2.6.19-1.2891.fc7
>
> TTFN
>
> Paul
>
dmesg output?
bug report for automounting not working for you?
More information about the fedora-test-list
mailing list