USB problems and CD mounting problems - what package should I BZ?
Paul
paul at all-the-johnsons.co.uk
Fri Jan 5 15:36:55 UTC 2007
Hi,
Running on rawhide here (x86_64).
I can't mount a USB device at all. USB is working (it's powering a
bluetooth dongle, Palm P3 and my MP3 player), but nothing is
auto-mounting.
The only thing of note in dmesg is
Linux version 2.6.19-1.2904.fc7
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
libusual: modprobe for usb-storage succeeded, but module is not present
usb 2-3: new full speed USB device using ohci_hcd and address 3
usb 2-3: device descriptor read/64, error -62
usb 2-3: device descriptor read/64, error -62
usb 2-3: new full speed USB device using ohci_hcd and address 4
usb 2-3: device descriptor read/64, error -62
usb 2-3: device descriptor read/64, error -62
usb 2-3: new full speed USB device using ohci_hcd and address 5
usb 2-3: device not accepting address 5, error -62
usb 2-3: new full speed USB device using ohci_hcd and address 6
usb 2-3: device not accepting address 6, error -62
usb 2-4: new full speed USB device using ohci_hcd and address 7
usb 2-4: configuration #1 chosen from 1 choice
usb 1-4: new low speed USB device using ohci_hcd and address 2
usb 1-4: device descriptor read/64, error -62
usb 1-4: device descriptor read/64, error -62
usb 1-4: new low speed USB device using ohci_hcd and address 3
usb 1-4: device descriptor read/64, error -62
usb 1-4: device descriptor read/64, error -62
usb 1-4: new low speed USB device using ohci_hcd and address 4
usb 1-4: device not accepting address 4, error -62
usb 1-4: new low speed USB device using ohci_hcd and address 5
(lots of error -62s).
If I put a CD or DVD into any of my drives, they too are not
automounting - I can mount them from the command line though. If I
double click on the icon in nautilus, it fails to mount then as well.
Do I need to file both of these problems under hal or the kernel or
indeed, some other package?
lsusb shows
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 007: ID 03f0:3004 Hewlett-Packard
Bus 002 Device 002: ID 55aa:b012 OnSpec Electronic, Inc. Mitsumi FA402M
8-in-2 Card Reader
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
(the 8 in 2 is off the main board, the HP is connected at the back of
the machine as are the other devices not shown)
lspci shows
00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev
a1)
00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management
(rev a1)
00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0
Controller (rev a2)
00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller
(v2.5) (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI
Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge
(rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
440 AGP 8x] (rev a4)
02:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
02:07.1 Input device controller: Creative Labs SB Audigy Game Port (rev
03)
02:07.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
02:08.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
02:09.0 Mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372/372N (rev 04)
02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
02:0b.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller (rev 13)
02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
and finally /proc/bus/usb/devices shows
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.19-1.2904.fc7 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.19-1.2904.fc7 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=55aa ProdID=b012 Rev= 1.01
S: Manufacturer=
S: Product=8-in-2
S: SerialNumber=D8C1CC9553
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=3004 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=DeskJet 980C
S: SerialNumber=ES16B190F0OF
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.19-1.2904.fc7 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Any help would be appreciated as I could do with being able to use by
pen drives in the rawhide box!
TTFN
Paul
--
"Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://listman.redhat.com/archives/fedora-test-list/attachments/20070105/03f56776/attachment.sig>
More information about the fedora-test-list
mailing list