Kernel 2.6.20-1.2990.fc7 bcm43xx messages

[Patrick]

Hi,

Just updated to latest Rawhide with kernel 2.6.20-1.2990.fc7. When I
rebooted I saw a lot of messages that weren't there when running the
previous 2985 kernel. Are these messages extra debug ouput or something
else? Should I bugzilla this?

Regards,
Patrick

bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18  02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1501:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: -116, high: -34, index: 120)
 [<c04061ed>] show_trace_log_lvl+0x1a/0x2f
 [<c04067b1>] show_trace+0x12/0x14
 [<c0406835>] dump_stack+0x16/0x18
 [<f94c3c5f>] bcm43xx_phy_lo_adjust+0x1f1/0x22f [bcm43xx]
 [<f94c0c9b>] bcm43xx_radio_set_txpower_bg+0x210/0x225 [bcm43xx]
 [<f94c5865>] bcm43xx_phy_initb6+0x6da/0x80d [bcm43xx]
 [<f94c5a43>] bcm43xx_phy_initg+0xab/0xcf7 [bcm43xx]
 [<f94c76b9>] bcm43xx_phy_init+0x60e/0x62c [bcm43xx]
 [<f94b813f>] bcm43xx_chip_init+0x7d4/0xad0 [bcm43xx]
 [<f94b9803>] wireless_core_up+0x187/0x682 [bcm43xx]
 [<f94ba07b>] bcm43xx_select_wireless_core+0x37d/0x4fe [bcm43xx]
 [<f94ba2f8>] bcm43xx_init_board+0x4a/0x124 [bcm43xx]
 [<f94baa84>] bcm43xx_net_open+0xd/0xf [bcm43xx]
 [<c05b4309>] dev_open+0x2e/0x66
 [<c05b2c6d>] dev_change_flags+0x51/0xf1
 [<c05bb01b>] rtnl_setlink+0x265/0x37e
 [<c05ba624>] rtnetlink_rcv_msg+0x1b9/0x1dc
 [<c05c6bf1>] netlink_run_queue+0x65/0xd1
 [<c05ba421>] rtnetlink_rcv+0x29/0x42
 [<c05c707c>] netlink_data_ready+0x15/0x56
 [<c05c6061>] netlink_sendskb+0x1f/0x37
 [<c05c694c>] netlink_unicast+0x1ab/0x1c5
 [<c05c705b>] netlink_sendmsg+0x271/0x27d
 [<c05aa077>] sock_sendmsg+0xe7/0x104
 [<c05aa1e5>] sys_sendmsg+0x151/0x1af
 [<c05ab1d0>] sys_socketcall+0x220/0x241
 [<c040507c>] syscall_call+0x7/0xb
 =======================
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1501:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: -116, high: -34, index: 120)
 [<c04061ed>] show_trace_log_lvl+0x1a/0x2f
 [<c04067b1>] show_trace+0x12/0x14
 [<c0406835>] dump_stack+0x16/0x18
 [<f94c3c5f>] bcm43xx_phy_lo_adjust+0x1f1/0x22f [bcm43xx]
 [<f94c6542>] bcm43xx_phy_initg+0xbaa/0xcf7 [bcm43xx]
 [<f94c76b9>] bcm43xx_phy_init+0x60e/0x62c [bcm43xx]
 [<f94b813f>] bcm43xx_chip_init+0x7d4/0xad0 [bcm43xx]
 [<f94b9803>] wireless_core_up+0x187/0x682 [bcm43xx]
 [<f94ba07b>] bcm43xx_select_wireless_core+0x37d/0x4fe [bcm43xx]
 [<f94ba2f8>] bcm43xx_init_board+0x4a/0x124 [bcm43xx]
 [<f94baa84>] bcm43xx_net_open+0xd/0xf [bcm43xx]
 [<c05b4309>] dev_open+0x2e/0x66
 [<c05b2c6d>] dev_change_flags+0x51/0xf1
 [<c05bb01b>] rtnl_setlink+0x265/0x37e
 [<c05ba624>] rtnetlink_rcv_msg+0x1b9/0x1dc
 [<c05c6bf1>] netlink_run_queue+0x65/0xd1
 [<c05ba421>] rtnetlink_rcv+0x29/0x42
 [<c05c707c>] netlink_data_ready+0x15/0x56
 [<c05c6061>] netlink_sendskb+0x1f/0x37
 [<c05c694c>] netlink_unicast+0x1ab/0x1c5
 [<c05c705b>] netlink_sendmsg+0x271/0x27d
 [<c05aa077>] sock_sendmsg+0xe7/0x104
 [<c05aa1e5>] sys_sendmsg+0x151/0x1af
 [<c05ab1d0>] sys_socketcall+0x220/0x241
 [<c040507c>] syscall_call+0x7/0xb
 =======================
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1501:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: -116, high: -34, index: 120)
 [<c04061ed>] show_trace_log_lvl+0x1a/0x2f
 [<c04067b1>] show_trace+0x12/0x14
 [<c0406835>] dump_stack+0x16/0x18
 [<f94c3c5f>] bcm43xx_phy_lo_adjust+0x1f1/0x22f [bcm43xx]
 [<f94c0c9b>] bcm43xx_radio_set_txpower_bg+0x210/0x225 [bcm43xx]
 [<f94c3a51>] bcm43xx_phy_init_pctl+0x20f/0x22c [bcm43xx]
 [<f94c661e>] bcm43xx_phy_initg+0xc86/0xcf7 [bcm43xx]
 [<f94c76b9>] bcm43xx_phy_init+0x60e/0x62c [bcm43xx]
 [<f94b813f>] bcm43xx_chip_init+0x7d4/0xad0 [bcm43xx]
 [<f94b9803>] wireless_core_up+0x187/0x682 [bcm43xx]
 [<f94ba07b>] bcm43xx_select_wireless_core+0x37d/0x4fe [bcm43xx]
 [<f94ba2f8>] bcm43xx_init_board+0x4a/0x124 [bcm43xx]
 [<f94baa84>] bcm43xx_net_open+0xd/0xf [bcm43xx]
 [<c05b4309>] dev_open+0x2e/0x66
 [<c05b2c6d>] dev_change_flags+0x51/0xf1
 [<c05bb01b>] rtnl_setlink+0x265/0x37e
 [<c05ba624>] rtnetlink_rcv_msg+0x1b9/0x1dc
 [<c05c6bf1>] netlink_run_queue+0x65/0xd1
 [<c05ba421>] rtnetlink_rcv+0x29/0x42
 [<c05c707c>] netlink_data_ready+0x15/0x56
 [<c05c6061>] netlink_sendskb+0x1f/0x37
 [<c05c694c>] netlink_unicast+0x1ab/0x1c5
 [<c05c705b>] netlink_sendmsg+0x271/0x27d
 [<c05aa077>] sock_sendmsg+0xe7/0x104
 [<c05aa1e5>] sys_sendmsg+0x151/0x1af
 [<c05ab1d0>] sys_socketcall+0x220/0x241
 [<c040507c>] syscall_call+0x7/0xb
 =======================
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
PM: Adding info for No Bus:hw_random
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1501:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: -116, high: -34, index: 120)
 [<c04061ed>] show_trace_log_lvl+0x1a/0x2f
 [<c04067b1>] show_trace+0x12/0x14
 [<c0406835>] dump_stack+0x16/0x18
 [<f94c3c5f>] bcm43xx_phy_lo_adjust+0x1f1/0x22f [bcm43xx]
 [<f94c4a5e>] bcm43xx_phy_lo_g_measure+0x8ca/0xaa6 [bcm43xx]
 [<f94baf6b>] bcm43xx_periodic_work_handler+0x176/0x42b [bcm43xx]
 [<c04350af>] run_workqueue+0x89/0x145
 [<c0435abc>] worker_thread+0xf8/0x124
 [<c043829f>] kthread+0xb3/0xdc
 [<c0405cd7>] kernel_thread_helper+0x7/0x10
 =======================
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:13:10:8a:ef:5f
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:13:10:8a:ef:5f.