Audio Not Clear.

austin316 austin.shyam at gmail.com
Sat Sep 15 10:10:13 UTC 2007


 <https://bugzilla.redhat.com/show_bug.cgi?id=291571>My audio is not clear.
It has some disturbances.

scsconfig.log.

------- System Config Soundcard Log --------
Sat Sep 15 15:32:47 IST 2007

------- lspci --------
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub
(rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port
(rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
(rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
01)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 LE]
(rev a2)
05:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
05:03.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
05:08.0 Ethernet controller: Intel Corporation 82801G (ICH7 Family) LAN
Controller (rev 01)

------- lspci -vn --------
00:00.0 0600: 8086:2770 (rev 02)
    Subsystem: 8086:544e
    Flags: bus master, fast devsel, latency 0
    Capabilities: [e0] Vendor Specific Information

00:01.0 0604: 8086:2771 (rev 02) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Memory behind bridge: d0000000-d1ffffff
    Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
    Capabilities: [88] Subsystem: 8086:544e
    Capabilities: [80] Power Management version 2
    Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
    Capabilities: [a0] Express Root Port (Slot+) IRQ 0

00:1b.0 0403: 8086:27d8 (rev 01)
    Subsystem: 8086:0202
    Flags: bus master, fast devsel, latency 0, IRQ 22
    Memory at d2100000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
    Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Memory behind bridge: d2200000-d22fffff
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
    Capabilities: [90] Subsystem: 0000:0000
    Capabilities: [a0] Power Management version 2

00:1c.2 0604: 8086:27d4 (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Memory behind bridge: d2300000-d23fffff
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
    Capabilities: [90] Subsystem: 0000:0000
    Capabilities: [a0] Power Management version 2

00:1c.3 0604: 8086:27d6 (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Memory behind bridge: d2400000-d24fffff
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
    Capabilities: [90] Subsystem: 0000:0000
    Capabilities: [a0] Power Management version 2

00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
    Subsystem: 8086:544e
    Flags: bus master, medium devsel, latency 0, IRQ 20
    I/O ports at 2080 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
    Subsystem: 8086:544e
    Flags: bus master, medium devsel, latency 0, IRQ 19
    I/O ports at 2060 [size=32]

00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI])
    Subsystem: 8086:544e
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at 2040 [size=32]

00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI])
    Subsystem: 8086:544e
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at 2020 [size=32]

00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI])
    Subsystem: 8086:544e
    Flags: bus master, medium devsel, latency 0, IRQ 20
    Memory at d2104000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port

00:1e.0 0604: 8086:244e (rev e1) (prog-if 01 [Subtractive decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: d2000000-d20fffff
    Capabilities: [50] Subsystem: 8086:544e

00:1f.0 0601: 8086:27b8 (rev 01)
    Subsystem: 8086:544e
    Flags: bus master, medium devsel, latency 0
    Capabilities: [e0] Vendor Specific Information

00:1f.1 0101: 8086:27df (rev 01) (prog-if 8a [Master SecP PriP])
    Subsystem: 8086:544e
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at 20b0 [size=16]

00:1f.2 0101: 8086:27c0 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: 8086:544e
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
    I/O ports at 20c8 [size=8]
    I/O ports at 20e4 [size=4]
    I/O ports at 20c0 [size=8]
    I/O ports at 20e0 [size=4]
    I/O ports at 20a0 [size=16]
    Capabilities: [70] Power Management version 2

00:1f.3 0c05: 8086:27da (rev 01)
    Subsystem: 8086:544e
    Flags: medium devsel, IRQ 19
    I/O ports at 2000 [size=32]

01:00.0 0300: 10de:0142 (rev a2) (prog-if 00 [VGA])
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
    Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Memory at d0000000 (64-bit, non-prefetchable) [size=16M]
    Expansion ROM at <ignored> [disabled]
    Capabilities: [60] Power Management version 2
    Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
    Capabilities: [78] Express Endpoint IRQ 0

05:02.0 0200: 10ec:8139 (rev 10)
    Subsystem: 11f6:8139
    Flags: bus master, medium devsel, latency 32, IRQ 18
    I/O ports at 1000 [size=256]
    Memory at d2001400 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at ffff0000 [disabled] [size=64K]
    Capabilities: [50] Power Management version 2

05:03.0 0480: 1131:7130 (rev 01)
    Subsystem: 5168:0138
    Flags: bus master, medium devsel, latency 32, IRQ 19
    Memory at d2001000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [40] Power Management version 1

05:08.0 0200: 8086:27dc (rev 01)
    Subsystem: 8086:3086
    Flags: bus master, medium devsel, latency 32, IRQ 21
    Memory at d2000000 (32-bit, non-prefetchable) [size=4K]
    I/O ports at 1100 [size=64]
    Capabilities: [dc] Power Management version 2

------- lsmod --------
Module                  Size  Used by
ppdev                  10693  0
lp                     14089  0
fuse                   40165  0
autofs4                21341  2
nf_conntrack_ipv4      11845  2
ipt_REJECT              7617  2
iptable_filter          6465  1
ip_tables              14213  1 iptable_filter
nf_conntrack_ipv6      19153  2
xt_state                6081  4
nf_conntrack           53641  3 nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
nfnetlink               8537  3
nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack
xt_tcpudp               6977  8
ip6t_REJECT             8128  2
ip6table_filter         6337  1
ip6_tables             15109  1 ip6table_filter
x_tables               14549  6
ipt_REJECT,ip_tables,xt_state,xt_tcpudp,ip6t_REJECT,ip6_tables
rfcomm                 37993  0
l2cap                  26449  3 rfcomm
sunrpc                146109  1
ib_iser                31421  0
rdma_cm                26201  1 ib_iser
ib_cm                  30337  1 rdma_cm
iw_cm                  11341  1 rdma_cm
ib_sa                  20517  2 rdma_cm,ib_cm
ib_mad                 34345  2 ib_cm,ib_sa
ib_core                45537  6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad
ib_addr                 9541  1 rdma_cm
iscsi_tcp              22337  0
libiscsi               22737  2 ib_iser,iscsi_tcp
scsi_transport_iscsi    28113  4 ib_iser,iscsi_tcp,libiscsi
dm_mirror              22489  0
dm_multipath           18641  0
dm_mod                 48424  2 dm_mirror,dm_multipath
video                  20305  0
output                  7105  1 video
sbs                    20305  0
battery                14289  0
ac                      8261  0
ipv6                  249924  20 nf_conntrack_ipv6,ip6t_REJECT
hci_usb                17293  0
bluetooth              50885  3 rfcomm,l2cap,hci_usb
tuner                  60265  0
snd_hda_intel         260029  4
snd_seq_dummy           6725  0
snd_seq_oss            30673  0
saa7134               117533  0
video_buf              22605  1 saa7134
snd_seq_midi_event      9929  1 snd_seq_oss
compat_ioctl32          5313  1 saa7134
8139cp                 22217  0
snd_seq                46361  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
ir_kbd_i2c             11217  1 saa7134
ir_common              33476  2 saa7134,ir_kbd_i2c
snd_seq_device         10325  3 snd_seq_dummy,snd_seq_oss,snd_seq
videodev               29537  1 saa7134
v4l2_common            18753  3 tuner,saa7134,videodev
v4l1_compat            16197  2 saa7134,videodev
8139too                25041  0
parport_pc             27621  1
i2c_i801               12497  0
e100                   34789  0
mii                     8385  3 8139cp,8139too,e100
parport                33065  3 ppdev,lp,parport_pc
rtc_cmos               10977  0
iTCO_wdt               14229  0
snd_pcm_oss            38625  0
i2c_core               22481  4 tuner,saa7134,ir_kbd_i2c,i2c_i801
iTCO_vendor_support     7109  1 iTCO_wdt
snd_mixer_oss          16969  2 snd_pcm_oss
snd_pcm                65517  2 snd_hda_intel,snd_pcm_oss
snd_timer              20957  2 snd_seq,snd_pcm
snd                    45188  14
snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
button                 10577  0
soundcore               9761  2 snd
snd_page_alloc         11209  2 snd_hda_intel,snd_pcm
sr_mod                 17765  0
cdrom                  33633  1 sr_mod
sg                     32101  0
ata_piix               16837  1
ata_generic             9029  0
libata                100817  2 ata_piix,ata_generic
sd_mod                 27841  2
scsi_mod              122701  8
ib_iser,iscsi_tcp,libiscsi,scsi_transport_iscsi,sr_mod,sg,libata,sd_mod
ext3                  111473  1
jbd                    53921  1 ext3
mbcache                10433  1 ext3
uhci_hcd               24025  0
ohci_hcd               21837  0
ehci_hcd               32085  0

------- /etc/modprobe.conf --------
alias eth0 e100
alias eth1 8139too
alias scsi_hostadapter libata
alias scsi_hostadapter1 ata_piix
alias snd-card-0 snd-hda-intel
options snd-card-0 index=0
options snd-hda-intel index=0

------- /etc/asound.conf --------


------- aplay -l --------
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

------- amixer --------
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 95 [75%] [-24.00dB] [on]
  Front Right: Playback 95 [75%] [-24.00dB] [on]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 127 [100%] [0.00dB] [off]
  Front Right: Playback 127 [100%] [0.00dB] [off]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 127
  Mono: Playback 127 [100%] [0.00dB] [off]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 127
  Mono: Playback 127 [100%] [0.00dB] [off]
Simple mixer control 'Line In as Output',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Mic as Output',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 14
  Front Left: Capture 7 [50%] [10.50dB] [on]
  Front Right: Capture 7 [50%] [10.50dB] [on]
Simple mixer control 'Input Source',0
  Capabilities: enum
  Items: 'Mic' 'Front Mic' 'Line'
  Item0: 'Mic'
Simple mixer control 'Mux',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 2
  Front Left: Capture 0 [0%] [0.00dB]
  Front Right: Capture 0 [0%] [0.00dB]

------- /proc/asound/version --------
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58
2007 UTC).

------- rpm -q alsa-lib --------
alsa-lib-1.0.14-3.fc8

------- rpm -q alsa-utils --------
alsa-utils-1.0.14-2.fc8

------- /proc/asound/modules --------
 0 snd_hda_intel

------- /proc/asound/pcm --------
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2

------- /etc/sysconfig/hwconf --------
-
class: OTHER
bus: PCI
detached: 0
driver: i2c-i801
desc: "Intel Corporation 82801G (ICH7 Family) SMBus Controller"
vendorId: 8086
deviceId: 27da
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1f
pcifn:  3
-
class: OTHER
bus: PCI
detached: 0
driver: iTCO_wdt
desc: "Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge"
vendorId: 8086
deviceId: 27b8
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1f
pcifn:  0
-
class: OTHER
bus: PCI
detached: 0
desc: "Intel Corporation 82801 PCI Bridge"
vendorId: 8086
deviceId: 244e
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1e
pcifn:  0
-
class: OTHER
bus: PCI
detached: 0
desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 4"
vendorId: 8086
deviceId: 27d6
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1c
pcifn:  3
-
class: OTHER
bus: PCI
detached: 0
desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 3"
vendorId: 8086
deviceId: 27d4
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1c
pcifn:  2
-
class: OTHER
bus: PCI
detached: 0
desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 1"
vendorId: 8086
deviceId: 27d0
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1c
pcifn:  0
-
class: OTHER
bus: PCI
detached: 0
desc: "Intel Corporation 82945G/GZ/P/PL PCI Express Root Port"
vendorId: 8086
deviceId: 2771
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom:    0
pcibus:  0
pcidev:  1
pcifn:  0
-
class: OTHER
bus: USB
detached: 0
desc: "American Power Conversion Back-UPS ES 500 FW:850.m3.I USB FW:m3"
usbclass: 3
usbsubclass: 0
usbprotocol: 0
usbbus: 2
usblevel: 1
usbport: 1
usbdev: 2
vendorId: 051d
deviceId: 0002
usbmfr: American Power Conversion
usbprod: Back-UPS ES 500 FW:850.m3.I USB FW:m3
-
class: OTHER
bus: USB
detached: 0
driver: hci_usb
desc: "ISSCBTA"
usbclass: 224
usbsubclass: 1
usbprotocol: 1
usbbus: 5
usblevel: 1
usbport: 0
usbdev: 2
vendorId: 1131
deviceId: 1001
usbprod: ISSCBTA
-
class: OTHER
bus: USB
detached: 0
driver: hci_usb
desc: "ISSCBTA"
usbclass: 254
usbsubclass: 1
usbprotocol: 0
usbbus: 5
usblevel: 1
usbport: 0
usbdev: 2
vendorId: 1131
deviceId: 1001
usbprod: ISSCBTA
-
class: OTHER
bus: PCI
detached: 0
desc: "Intel Corporation 82945G/GZ/P/PL Memory Controller Hub"
vendorId: 8086
deviceId: 2770
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev:  0
pcifn:  0
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.23-0.181.rc6.git4.fc8 ehci_hcd EHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 1
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 ehci_hcd
usbprod: EHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 2
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 3
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 4
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
desc: "Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd UHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 5
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd
usbprod: UHCI Host Controller
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0003"
deviceId: PNP0003
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0200"
deviceId: PNP0200
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0303"
deviceId: PNP0303
compat: PNP030b
-
class: OTHER
bus: ISAPNP
detached: 0
driver: parport_pc
desc: "PNP0401"
deviceId: PNP0401
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0501"
deviceId: PNP0501
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0800"
deviceId: PNP0800
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0a03"
deviceId: PNP0a03
-
class: OTHER
bus: ISAPNP
detached: 0
driver: rtc-cmos
desc: "PNP0b00"
deviceId: PNP0b00
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0c02"
deviceId: PNP0c02
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0c02"
deviceId: PNP0c02
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0c04"
deviceId: PNP0c04
-
class: OTHER
bus: ISAPNP
detached: 0
desc: "PNP0f03"
deviceId: PNP0f03
compat: PNP0f13
-
class: OTHER
bus: PSAUX
detached: 0
desc: "Power Button (FF)"
-
class: OTHER
bus: PSAUX
detached: 0
desc: "Sleep Button (CM)"
-
class: OTHER
bus: PSAUX
detached: 0
desc: "saa7134 IR (LifeView/Typhoon Fl"
-
class: NETWORK
bus: PCI
detached: 0
device: eth0
driver: e100
desc: "Intel Corporation 82801G (ICH7 Family) LAN Controller"
network.hwaddr: 00:16:76:8b:d3:08
vendorId: 8086
deviceId: 27dc
subVendorId: 8086
subDeviceId: 3086
pciType: 1
pcidom:    0
pcibus:  5
pcidev:  8
pcifn:  0
-
class: NETWORK
bus: PCI
detached: 0
device: eth1
driver: 8139too
desc: "Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+"
network.hwaddr: 00:80:48:37:0f:4a
vendorId: 10ec
deviceId: 8139
subVendorId: 11f6
subDeviceId: 8139
pciType: 1
pcidom:    0
pcibus:  5
pcidev:  2
pcifn:  0
-
class: MOUSE
bus: PSAUX
detached: 0
device: input/mice
driver: generic3ps/2
desc: "ImPS/2 Logitech Wheel Mouse"
-
class: MOUSE
bus: PSAUX
detached: 0
device: input/mice
driver: generic3ps/2
desc: "Macintosh mouse button emulation"
-
class: AUDIO
bus: PCI
detached: 0
driver: snd-hda-intel
desc: "Intel Corporation 82801G (ICH7 Family) High Definition Audio
Controller"
vendorId: 8086
deviceId: 27d8
subVendorId: 8086
subDeviceId: 0202
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1b
pcifn:  0
-
class: CDROM
bus: SCSI
detached: 0
device: scd0
desc: "SONY DVD RW DRU-810A"
host: 0
id: 0
channel: 0
lun: 0
-
class: CDROM
bus: SCSI
detached: 0
device: scd1
desc: "SONY DVD RW DW-G120A"
host: 0
id: 1
channel: 0
lun: 0
-
class: VIDEO
bus: PCI
detached: 0
driver: nvidiafb
desc: "nVidia Corporation NV43 [GeForce 6600 LE]"
video.xdriver: nv
vendorId: 10de
deviceId: 0142
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom:    0
pcibus:  1
pcidev:  0
pcifn:  0
-
class: HD
bus: SCSI
detached: 0
device: sda
desc: "ATA ST380817AS"
host: 2
id: 0
channel: 0
lun: 0
-
class: HD
bus: SCSI
detached: 0
device: sdb
desc: "ATA ST3160812AS"
host: 2
id: 1
channel: 0
lun: 0
-
class: HD
bus: SCSI
detached: 0
device: sdc
desc: "ATA ST3200827AS"
host: 3
id: 0
channel: 0
lun: 0
-
class: CAPTURE
bus: PCI
detached: 0
driver: saa7134
desc: "Philips Semiconductors SAA7130 Video Broadcast Decoder"
vendorId: 1131
deviceId: 7130
subVendorId: 5168
subDeviceId: 0138
pciType: 1
pcidom:    0
pcibus:  5
pcidev:  3
pcifn:  0
-
class: KEYBOARD
bus: PSAUX
detached: 0
desc: "AT Translated Set 2 keyboard"
-
class: USB
bus: PCI
detached: 0
driver: ehci-hcd
desc: "Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller"
vendorId: 8086
deviceId: 27cc
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1d
pcifn:  7
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4"
vendorId: 8086
deviceId: 27cb
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1d
pcifn:  3
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3"
vendorId: 8086
deviceId: 27ca
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1d
pcifn:  2
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2"
vendorId: 8086
deviceId: 27c9
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1d
pcifn:  1
-
class: USB
bus: PCI
detached: 0
driver: uhci-hcd
desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1"
vendorId: 8086
deviceId: 27c8
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1d
pcifn:  0
-
class: IDE
bus: PCI
detached: 0
driver: ata_piix
desc: "Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller"
vendorId: 8086
deviceId: 27c0
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1f
pcifn:  2
-
class: IDE
bus: PCI
detached: 0
driver: ata_piix
desc: "Intel Corporation 82801G (ICH7 Family) IDE Controller"
vendorId: 8086
deviceId: 27df
subVendorId: 8086
subDeviceId: 544e
pciType: 1
pcidom:    0
pcibus:  0
pcidev: 1f
pcifn:  1

------- dmesg --------
Linux version 2.6.23-0.181.rc6.git4.fc8 (kojibuilder@) (gcc version
4.1.220070821 (Red Hat
4.1.2-23)) #1 SMP Thu Sep 13 18:52:33 EDT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfe65000 (usable)
 BIOS-e820: 00000000bfe65000 - 00000000bfee8000 (ACPI NVS)
 BIOS-e820: 00000000bfee8000 - 00000000bfeec000 (usable)
 BIOS-e820: 00000000bfeec000 - 00000000bfeff000 (ACPI data)
 BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe680
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 786176) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   786176
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   786176
On node 0 totalpages: 786176
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4040 pages, LIFO batch:0
  Normal zone: 3080 pages used for memmap
  Normal zone: 222200 pages, LIFO batch:31
  HighMem zone: 7612 pages used for memmap
  HighMem zone: 549188 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FE020, 0014 (r0 INTEL )
ACPI: RSDT BFEFDE48, 003C (r1 INTEL  D945GNT       FF9 MSFT  1000013)
ACPI: FACP BFEFCF10, 0074 (r1 INTEL  D945GNT       FF9 MSFT  1000013)
ACPI: DSDT BFEF7010, 4348 (r1 INTEL  D945GNT       FF9 MSFT  1000013)
ACPI: FACS BFEE3C40, 0040
ACPI: APIC BFEFCE10, 0078 (r1 INTEL  D945GNT       FF9 MSFT  1000013)
ACPI: WDDT BFEF6F90, 0040 (r1 INTEL  D945GNT       FF9 MSFT  1000013)
ACPI: MCFG BFEF6F10, 003C (r1 INTEL  D945GNT       FF9 MSFT  1000013)
ACPI: ASF! BFEFCD10, 00A6 (r32 INTEL  D945GNT       FF9 MSFT  1000013)
ACPI: SSDT BFEF6E90, 002F (r1 INTEL  SetupVar      FF9 MSFT  1000013)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c0000000 (gap: bff00000:40100000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 775428
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0811000 soft=c07f1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3000.081 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1024 kB
 per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3088304k/3144704k available (2269k kernel code, 54488k reserved,
1164k data, 568k init, 2226600k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0760000 - 0xc07ee000   ( 568 kB)
      .data : 0xc06377ff - 0xc075aa44   (1164 kB)
      .text : 0xc0400000 - 0xc06377ff   (2269 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 6005.76 BogoMIPS
(lpj=3002883)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e43d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000e43d
00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
lockdep: not fixing up alternatives.
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
lockdep: not fixing up alternatives.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0812000 soft=c07f2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.05 BogoMIPS
(lpj=2999528)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e43d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000e43d
00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
Total of 2 processors activated (12004.82 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=56 bytes
sizeof(inode)=604 bytes
sizeof(dentry)=160 bytes
sizeof(ext3inode)=856 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3360 bytes
khelper used greatest stack depth: 3160 bytes left
khelper used greatest stack depth: 3084 bytes left
Booting paravirtualized kernel on bare hardware
Time:  8:19:42  Date: 08/15/107
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub
without MMCONFIG support.
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3)
ACPI: Using IOAPIC for interrupt routing
khelper used greatest stack depth: 2980 bytes left
ACPI: PCI Root Bridge [PCI0] (0000:00)
Force enabled HPET at base address 0xfed00000
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
pnp: 00:06: ioport range 0x500-0x53f has been reserved
pnp: 00:06: ioport range 0x400-0x47f has been reserved
pnp: 00:06: ioport range 0x680-0x6ff has been reserved
PCI: Failed to allocate mem resource #6:20000 at d0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: d0000000-d1ffffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: d2200000-d22fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: d2300000-d23fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
  IO window: disabled.
  MEM window: d2400000-d24fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: d2000000-d20fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2903k freed
khelper used greatest stack depth: 2956 bytes left
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1189844381.677:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 23DDDD67A13DBFBF
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Firmware left 0000:05:08.0 e100 interrupts enabled, disabling
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (processor_core-0798): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0798): AE_NOT_FOUND, Processor Device is not
present [20070126]
cpuidle: driver acpi_idle failed to attach to cpu 1
cpuidle: driver acpi_idle failed to attach to cpu 0
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
  Magic number: 7:263:321
  hash matches device tty46
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 568k freed
Write protecting the kernel read-only data: 866k
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd2104000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
insmod used greatest stack depth: 1876 bytes left
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120b0 irq
14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120b8 irq
15
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
ata1.00: ATAPI: SONY    DVD RW DRU-810A, 1.0d, max UDMA/33
ata1.01: ATAPI: SONY    DVD RW DW-G120A, MYR5, max UDMA/66
ata1.01: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS ES 500
FW:850.m3.I USB FW:m3] on usb-0000:00:1d.0-2
ata1.01: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM            SONY     DVD RW DRU-810A  1.0d PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM            SONY     DVD RW DW-G120A  MYR5 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x000120c8 ctl 0x000120e6 bmdma 0x000120a0 irq
19
ata4: SATA max UDMA/133 cmd 0x000120c0 ctl 0x000120e2 bmdma 0x000120a8 irq
19
usb 5-1: new full speed USB device using uhci_hcd and address 2
ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ATA-7: ST3160812AS, 3.AAH, max UDMA/133
ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/133
ata4.00: ATA-7: ST3200827AS, 3.AAH, max UDMA/133
ata4.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
 sda: sda1 sda2 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 2:0:1:0: Direct-Access     ATA      ST3160812AS      3.AA PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
 sdb: sdb1
sd 2:0:1:0: [sdb] Attached SCSI disk
scsi 3:0:0:0: Direct-Access     ATA      ST3200827AS      3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 390721968 512-byte hardware sectors (200050 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 3:0:0:0: [sdc] 390721968 512-byte hardware sectors (200050 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
 sdc: sdc1 sdc2 < sdc5 sdc6 >
sd 3:0:0:0: [sdc] Attached SCSI disk
insmod used greatest stack depth: 808 bytes left
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1189844388.325:2): enforcing=1 old_enforcing=0 auid=4294967295
security:  5 users, 11 roles, 2244 types, 106 bools, 1 sens, 1024 cats
security:  67 classes, 224474 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda6, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1189844388.937:3): policy loaded auid=4294967295
scsi 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:1:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: Attached scsi generic sg4 type 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 21
e100: eth0: e100_probe: addr 0xd2000000, irq 21, MAC addr 00:16:76:8B:D3:08
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
eth1: RealTek RTL8139 at 0xf895e400, 00:80:48:37:0f:4a, IRQ 18
eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
Linux video capture interface: v2.00
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
saa7130[0]: found at 0000:05:03.0, rev: 1, irq: 19, latency: 32, mmio:
0xd2001000
saa7130[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000
[card=3,autodetected]
saa7130[0]: board init: gpio is 1f900
saa7130[0]: there are different flyvideo cards with different tuners
saa7130[0]: out there, you might have to use the tuner=<nr> insmod
saa7130[0]: option to override the default value.
input: saa7134 IR (LifeView/Typhoon Fl as /class/input/input5
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 1-0061: chip found @ 0xc2 (saa7130[0])
tuner 1-0061: type set to 37 (LG PAL (newer TAPC series))
tuner 1-0061: type set to 37 (LG PAL (newer TAPC series))
tuner 1-0063: chip found @ 0xc6 (saa7130[0])
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0
saa7130[0]: registered device radio0
usb 5-1: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
floppy0: no floppy controllers found
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel at redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda6, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran at aivazian.fsnet.co.uk>
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
audit(1189844410.874:4): audit_pid=2086 old=0 by auid=4294967295
subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
ip6_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth1: no IPv6 routers present
fuse init (API version 7.8)
SELinux: initialized (dev sdc1, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sdc5, type fuseblk), uses genfs_contexts
usb 5-1: USB disconnect, address 2
lp0: using parport0 (interrupt-driven).
lp0: console ready
ppdev: user-space parallel port driver
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev0: registered pardevice
ppdev0: unregistered pardevice
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/fedora-test-list/attachments/20070915/23111684/attachment.htm>


More information about the fedora-test-list mailing list