Kernel boot failure since 2.6.69-0.18.rc0.git9
Art Haas
ahaas at airmail.net
Sun Feb 1 17:25:21 UTC 2009
Hi.
Here's one more report about kernel bootup errors, as I've had no luck
with kernels more recent that the one listed in ${SUBJECT}. Below is the
dmesg output for this working kernel, and things stop after the system
identifies the CD drive. I've edited the output to indicate exactly
where. The next kernel I tried was from an update about two days later,
and that kernel and all subsequent kernels have frozen at the same
point. A scan through this list suggests that the following bug report
is close to what I am seeing:
https://bugzilla.redhat.com/show_bug.cgi?id=479525
Also, there is warning about a sleeping function called in an invalid
context, but given that this kernel came out during the initial 2.6.29
merge window I'd guess that this issue has been identified and resolved.
The machine running Rawhide is an older Dell Optiplex GX400, btw.
===========================================================
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29-0.18.rc0.git9.fc11.i686
(mockbuild at x86-1.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red
Hat 4.3.2-7) (GCC) ) #1 SMP Wed Jan 7 15:31:31 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff77000 (usable)
BIOS-e820: 000000001ff77000 - 000000001ff96000 (ACPI data)
BIOS-e820: 000000001ff96000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x1ff77 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 1ff77000 @ 7000-8b000
Using x86 segment limits to approximate NX protection
RAMDISK: 1fc34000 - 1ff66b08
ACPI: RSDP 000FD6D0, 0014 (r0 DELL )
ACPI: RSDT 000FD6E4, 0030 (r1 DELL WS330 5 ASL 61)
ACPI: FACP 000FD718, 0074 (r1 DELL WS330 5 ASL 61)
ACPI: DSDT FFFE5022, 2474 (r1 DELL dt_ex 1000 MSFT 100000D)
ACPI: FACS 1FF96000, 0040
ACPI: SSDT FFFE7496, 00A7 (r1 DELL st_ex 1000 MSFT 100000D)
ACPI: BOOT 000FD7E8, 0028 (r1 DELL WS330 5 ASL 61)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ff77000
low ram: 00000000 - 1ff77000
bootmap 00002000 - 00005ff0
(9 early reservations) ==> bootmem [0000000000 - 001ff77000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000400000 - 0000fa7ea4] TEXT DATA BSS ==> [0000400000 -
0000fa7ea4]
#4 [001fc34000 - 001ff66b08] RAMDISK ==> [001fc34000 -
001ff66b08]
#5 [0000fa8000 - 0000fbe000] INIT_PG_TABLE ==> [0000fa8000 -
0000fbe000]
#6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
#7 [0000007000 - 0000072000] PGTABLE ==> [0000007000 -
0000072000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 -
0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ff77
HighMem 0x0001ff77 -> 0x0001ff77
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x000000a0
0: 0x00000100 -> 0x0001ff77
On node 0 totalpages: 130839
free_area_init_node: node 0, pgdat c086ea00, node_mem_map c1001000
DMA zone: 60 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3940 pages, LIFO batch:0
Normal zone: 1858 pages used for memmap
Normal zone: 124981 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 1359872 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
128921
Kernel command line: ro root=/dev/VolGroup00/LogVol00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0a77000 soft=c0a57000
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 1296.012 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 2591 kB
per task-struct memory footprint: 1920 bytes
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2618700 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 495292k/523740k available (2969k kernel code, 27824k reserved,
1813k data, 1676k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc57000 - 0xfffff000 (3744 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xe0777000 - 0xff3fe000 ( 492 MB)
lowmem : 0xc0000000 - 0xdff77000 ( 511 MB)
.init : 0xc08b1000 - 0xc0a54000 (1676 kB)
.data : 0xc06e663d - 0xc08abd70 (1813 kB)
.text : 0xc0400000 - 0xc06e663d (2969 kB)
Checking if this processor honours the WP bit even in supervisor
mode...Ok.
SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer
frequency.. 2592.02 BogoMIPS (lpj=1296012)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
[ds] using netburst configuration
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
debug: unmapping init memory c08ad000..c08b1000
ACPI: Core revision 20080926
ACPI: setting ELCR to 0200 (from 0e00)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (2592.02 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=60 bytes
sizeof(inode)=648 bytes
sizeof(dentry)=164 bytes
sizeof(ext3inode)=916 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=5328 bytes
CPU0 attaching NULL sched-domain.
khelper used greatest stack depth: 2944 bytes left
net_namespace: 1240 bytes
Booting paravirtualized kernel on bare hardware
Time: 22:54:47 Date: 01/20/09
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc03e, last bus=2
PCI: Using configuration type 1 for base access
khelper used greatest stack depth: 2920 bytes left
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 20 io port: [0xff80-0xff9f]
pci 0000:00:1f.3: reg 20 io port: [0xdcd0-0xdcdf]
pci 0000:00:1f.4: reg 20 io port: [0xff60-0xff7f]
pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x80000000-0x8000ffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfd000000-0xfeffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci 0000:02:08.0: reg 10 32bit mmio: [0xff1ff800-0xff1fffff]
pci 0000:02:08.0: reg 14 32bit mmio: [0xff1f8000-0xff1fbfff]
pci 0000:02:08.0: supports D2
pci 0000:02:08.0: PME# supported from D2 D3hot
pci 0000:02:08.0: PME# disabled
pci 0000:02:0c.0: reg 10 io port: [0xec80-0xecff]
pci 0000:02:0c.0: reg 14 32bit mmio: [0xff1ff400-0xff1ff47f]
pci 0000:02:0c.0: reg 30 32bit mmio: [0xff200000-0xff21ffff]
pci 0000:02:0c.0: supports D1 D2
pci 0000:02:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0c.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xff100000-0xff2fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
(0x800-0x87f), disabling
pnp 00:0b: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
(0x800-0x87f), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0xffffff could not be reserved
system 00:00: iomem range 0x1000000-0x1ff76fff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
system 00:0b: ioport range 0xc00-0xc7f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfd000000-0xfeffffff
pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0xe000-0xefff
pci 0000:00:1e.0: MEM window: 0xff100000-0xff2fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x000000300fffff
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 mmio: [0x0-0x0]
bus: 01 index 1 mmio: [0xfd000000-0xfeffffff]
bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xe000-0xefff]
bus: 02 index 1 mmio: [0xff100000-0xff2fffff]
bus: 02 index 2 mmio: [0x30000000-0x300fffff]
bus: 02 index 3 io port: [0x00-0xffff]
bus: 02 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
debug: unmapping init memory dfc34000..dff67000
Simple Boot Flag at 0x7d set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1232492088.076:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Created ptmx node in devpts ino 2
msgmni has been set to 967
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [VBTN]
processor ACPI_CPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel i850 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATA-6: ST380013A, 8.01, max UDMA/100
ata1.00: 156301488 sectors, multi 8: LBA48
ata1.01: HPA detected: current 78125000, native 80043264
ata1.01: ATA-6: Maxtor 5T040H4, TAH71DP0, max UDMA/100
ata1.01: 78125000 sectors, multi 8: LBA
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata2.01: NODEV after polling detection
ata2.00: ATAPI: SONY CD-RW CRX160E, 1.0g, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST380013A 8.01 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5
GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5
GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA Maxtor 5T040H4 TAH7 PQ: 0
ANSI: 5
sd 0:0:1:0: [sdb] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:1:0: [sdb] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: CD-ROM SONY CD-RW CRX160E 1.0g PQ: 0
ANSI: 5
###
### things freeze at this point with more recent kernels
###
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg2 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) ->
IRQ 11
uhci_hcd 0000:00:1f.2: setting latency timer to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ff80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29-0.18.rc0.git9.fc11.i686 uhci_hcd
usb usb1: SerialNumber: 0000:00:1f.2
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 9 (level, low) ->
IRQ 9
uhci_hcd 0000:00:1f.4: setting latency timer to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ff60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29-0.18.rc0.git9.fc11.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1f.4
PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please
boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (8183 buckets, 32732 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option
or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 9:696:957
debug: unmapping init memory c08b1000..c0a54000
Write protecting the kernel text: 2972k
Write protecting the kernel read-only data: 1344k
usb 1-2: new low speed USB device using uhci_hcd and address 2
setfont used greatest stack depth: 2564 bytes left
modprobe used greatest stack depth: 2512 bytes left
usb 1-2: configuration #1 chosen from 1 choice
input: A4Tech PS/2+USB Mouse as
/devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2:1.0/input/input4
a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech
PS/2+USB Mouse] on usb-0000:00:1f.2-2/input0
usb 1-2: New USB device found, idVendor=09da, idProduct=0006
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: PS/2+USB Mouse
usb 1-2: Manufacturer: A4Tech
lvm used greatest stack depth: 2476 bytes left
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1232492091.828:2): selinux=0 auid=4294967295
ses=4294967295
sh used greatest stack depth: 1484 bytes left
udev: starting version 135
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: PC Speaker as /devices/platform/pcspkr/input/input5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
vendor=8086 device=244e
3c59x 0000:02:0c.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) ->
IRQ 11
3c59x: Donald Becker and others.
0000:02:0c.0: 3Com PCI 3c905C Tornado at e0876400.
eth0 (3c59x): not using net_device_ops yet
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low)
-> IRQ 10
vendor=8086 device=244e
firewire_ohci 0000:02:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level,
low) -> IRQ 10
firewire_ohci: Added fw-ohci device 0000:02:08.0, OHCI version 1.0
BUG: sleeping function called from invalid context at mm/slub.c:1599
in_atomic(): 1, irqs_disabled(): 1, pid: 932, name: modprobe
1 lock held by modprobe/932:
#0: (&card->lock){.+..}, at: [<e08ac90e>]
fw_core_handle_bus_reset+0x1d/0x69f [firewire_core]
irq event stamp: 6927
hardirqs last enabled at (6926): [<c06e20c4>]
_spin_unlock_irqrestore+0x40/0x50
hardirqs last disabled at (6927): [<c06e2322>]
_spin_lock_irqsave+0x23/0x6d
softirqs last enabled at (6728): [<c043545e>] __do_softirq+0x147/0x151
softirqs last disabled at (6921): [<c0405624>] do_softirq+0x77/0xdf
Pid: 932, comm: modprobe Not tainted 2.6.29-0.18.rc0.git9.fc11.i686 #1
Call Trace:
[<c042a646>] __might_sleep+0xea/0xef
[<c04a0f35>] kmem_cache_alloc+0x28/0xf4
[<c05b5823>] ? device_initialize+0x16/0xfe
[<c05b5823>] device_initialize+0x16/0xfe
[<e08ae12f>] fw_node_event+0x45/0x184 [firewire_core]
[<e08ad03a>] report_found_node+0x83/0x89 [firewire_core]
[<e08ac855>] for_each_fw_node+0x89/0xda [firewire_core]
[<e08acfb7>] ? report_found_node+0x0/0x89 [firewire_core]
[<e08acd75>] fw_core_handle_bus_reset+0x484/0x69f [firewire_core]
[<c044ec22>] ? trace_hardirqs_on_caller+0x10b/0x145
[<e090575d>] bus_reset_tasklet+0x377/0x382 [firewire_ohci]
[<c0434d03>] tasklet_action+0x80/0xeb
[<c04353af>] __do_softirq+0x98/0x151
[<c0435317>] ? __do_softirq+0x0/0x151
<IRQ> [<c0470cf9>] ? handle_level_irq+0x0/0xaf
[<c0435072>] ? irq_exit+0x44/0x7b
[<c0405597>] ? do_IRQ+0xf0/0x106
[<c04041ac>] ? common_interrupt+0x2c/0x34
[<c044deb5>] ? trace_hardirqs_off+0xb/0xd
[<c06e20bd>] ? _spin_unlock_irqrestore+0x39/0x50
[<c04311c7>] ? vprintk+0x32e/0x359
[<c0439720>] ? msleep+0x10/0x16
[<e09032c4>] ? ohci_update_phy_reg+0x33/0x81 [firewire_ohci]
[<e08ac06e>] ? fw_core_initiate_bus_reset+0x18/0x1d [firewire_core]
[<e09039c8>] ? ohci_enable+0x336/0x342 [firewire_ohci]
[<c06dfc7f>] ? printk+0xf/0x18
[<e0905a47>] ? pci_probe+0x2c7/0x36c [firewire_ohci]
[<c0548803>] ? pci_device_probe+0x39/0x59
[<c05b7725>] ? driver_probe_device+0x99/0x12c
[<c05b77fe>] ? __driver_attach+0x46/0x62
[<c05b716a>] ? bus_for_each_dev+0x3d/0x67
[<c05b75d0>] ? driver_attach+0x14/0x16
[<c05b77b8>] ? __driver_attach+0x0/0x62
[<c05b6bf0>] ? bus_add_driver+0xa0/0x1c0
[<c05b797f>] ? driver_register+0x81/0xe1
[<c0540076>] ? __spin_lock_init+0x24/0x4a
[<c05489f6>] ? __pci_register_driver+0x49/0x77
[<e090b000>] ? fw_ohci_init+0x0/0x19 [firewire_ohci]
[<e090b017>] ? fw_ohci_init+0x17/0x19 [firewire_ohci]
[<c040114d>] ? _stext+0x65/0x17a
[<c0408042>] ? sched_clock+0x8/0xb
[<c0408042>] ? sched_clock+0x8/0xb
[<c044d54b>] ? lock_release_holdtime+0x30/0x131
[<c049f4a5>] ? check_valid_pointer+0x1f/0x4e
[<c044e6ed>] ? mark_lock+0x1e/0x349
[<c044e6ed>] ? mark_lock+0x1e/0x349
[<c044e6ed>] ? mark_lock+0x1e/0x349
[<c0457931>] ? load_module+0x15be/0x17a7
[<c044e6ed>] ? mark_lock+0x1e/0x349
[<c044ea6b>] ? mark_held_locks+0x53/0x6a
[<c06e1027>] ? __mutex_lock_common+0x2d4/0x329
[<c044ec38>] ? trace_hardirqs_on_caller+0x121/0x145
[<c044e6ed>] ? mark_lock+0x1e/0x349
[<c044ea6b>] ? mark_held_locks+0x53/0x6a
[<c06e0c09>] ? __mutex_unlock_slowpath+0x10d/0x121
[<c044ec38>] ? trace_hardirqs_on_caller+0x121/0x145
[<c044ec67>] ? trace_hardirqs_on+0xb/0xd
[<c0408042>] ? sched_clock+0x8/0xb
[<c044d54b>] ? lock_release_holdtime+0x30/0x131
[<c04457fe>] ? __blocking_notifier_call_chain+0x40/0x4c
[<c0444f9e>] ? up_read+0x16/0x2c
[<c04457fe>] ? __blocking_notifier_call_chain+0x40/0x4c
[<c0457c6f>] ? sys_init_module+0x89/0x18c
[<c0403b76>] ? syscall_call+0x7/0xb
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
firewire_core: created device fw0: GUID 005042f804601310, S400
ppdev: user-space parallel port driver
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low)
-> IRQ 10
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50795 usecs
intel8x0: measured clock 78 rejected
intel8x0: clocking to 48000
modprobe used greatest stack depth: 700 bytes left
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1
extents:1 across:1048568k
platform microcode: firmware: requesting intel-ucode/0f-00-07
Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter
Oruba
microcode: CPU0 updated from revision 0x7 to 0x12, date = 2002-07-16
Microcode Update Driver: v2.00 removed.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: setting full-duplex.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
fuse init (API version 7.11)
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
eth0: no IPv6 routers present
Bridge firewalling registered
====================================================
Thanks.
Art Haas
More information about the fedora-test-list
mailing list