[Fedora-xen] Asterisk and passing a TDM400P card to a DomU

[Steven Haigh]

Hi guys,

I'm trying to use a TDM400P PCI card in a DomU host however when I  
insert the modules for the PCI card to the asterisk DomU, I get the  
following:

Jan 17 22:13:48 asterisk kernel: Zapata Telephony Interface  
Registered on major 196
Jan 17 22:13:48 asterisk kernel: Zaptel Version: 1.4.0 Echo  
Canceller: MG2
Jan 17 22:13:53 asterisk kernel: PCI: Enabling device 0000:00:00.0  
(0000 -> 0003)
Jan 17 22:13:53 asterisk kernel: Freshmaker version: 73
Jan 17 22:13:53 asterisk kernel: Freshmaker passed register test
Jan 17 22:13:54 asterisk kernel: Module 0: Not installed
Jan 17 22:13:54 asterisk kernel: Module 1: Not installed
Jan 17 22:13:54 asterisk kernel: Module 2: Not installed
Jan 17 22:13:54 asterisk kernel: Module 3: Installed -- AUTO FXO  
(AUSTRALIA mode)
Jan 17 22:13:54 asterisk kernel: Found a Wildcard TDM: Wildcard  
TDM400P REV I (1 modules)
Jan 17 22:13:54 asterisk kernel: Registered tone zone 1 (Australia)
Jan 17 22:13:54 asterisk kernel: TDM PCI Master abort
Jan 17 22:13:54 asterisk last message repeated 3100 times
Jan 17 22:13:54 asterisk kernel: TDM Pr ar abort
Jan 17 22:13:54 asterisk kernel: r abort
Jan 17 22:13:54 asterisk kernel: <r aborr abor aborr abortr abort
Jan 17 22:13:54 asterisk kernel: r abort
Jan 17 22:13:54 asterisk kernel: <r abort
Jan 17 22:13:54 asterisk kernel: r abort
Jan 17 22:13:54 asterisk kernel: r abort
Jan 17 22:13:54 asterisk kernel: <r abortr abort

  <<< repeated many, many times >>>

This seems to happen until I unload the module.

I have passed the PCI card through successfully, as I see this on the  
DomU:
# lspci
00:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX  
Modem/ISDN interface

Anyone have any ideas on this?

-- 
Steven Haigh

Email: netwiz at crc.id.au
Web: http://www.crc.id.au
Phone: (03) 9017 0597 - 0412 935 897