[Fedora-xen] domU stops at --> EXT3 FS on sda1, internal journal
Todd Deshane
deshantm at gmail.com
Sat Feb 23 03:08:34 UTC 2008
Hi,
On Fri, Feb 22, 2008 at 2:13 PM, Naveen R <raveenr at gmail.com> wrote:
> Hello everyone, i am using fedora 7 and tried to run the xen images
> available at jailtime.org site and was able to start the os but it stops
> after the following log and will not proceed any further. The state in
> virt-manager shows its running but the console stops after the following.
> Can anyone tell me whats the problem. Thanks in advance.
>
Try to Add the following line the guest config file:
extra="xencons=tty"
Best Regards,
Todd
> Using config file "/xen/debian.4-0/debian.4-0.xen3.cfg".
> Started domain debian.4-0
> Linux version 2.6.20-2925.9.fc7xen (
> kojibuilder at xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502
> (Red Hat 4.1.2-12)) #1 SMP Tue May 22 08:53:03 EDT 2007
> BIOS-provided physical RAM map:
> sanitize start
> sanitize bail 0
> copy_e820_map() start: 0000000000000000 size: 000000000bc00000 end:
> 000000000bc00000 type: 1
> Xen: 0000000000000000 - 000000000bc00000 (usable)
> 0MB HIGHMEM available.
> 188MB LOWMEM available.
> NX (Execute Disable) protection: active
> Zone PFN ranges:
> DMA 0 -> 48128
> Normal 48128 -> 48128
> HighMem 48128 -> 48128
> early_node_map[1] active PFN ranges
> 0: 0 -> 48128
> ACPI in unprivileged domain disabled
> Built 1 zonelists. Total pages: 47752
> Kernel command line: root=/dev/sda1 ro ip=:1.2.3.4::::eth0:dhcp
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> CPU 0 irqstacks, hard=c135f000 soft=c133f000
> PID hash table entries: 1024 (order: 10, 4096 bytes)
> Xen reported: 1804.083 MHz processor.
> Console: colour dummy device 80x25
> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> ... MAX_LOCKDEP_SUBCLASSES: 8
> ... MAX_LOCK_DEPTH: 30
> ... MAX_LOCKDEP_KEYS: 2048
> ... CLASSHASH_SIZE: 1024
> ... MAX_LOCKDEP_ENTRIES: 8192
> ... MAX_LOCKDEP_CHAINS: 16384
> ... CHAINHASH_SIZE: 8192
> memory used by lock dependency info: 1064 kB
> per task-struct memory footprint: 1200 bytes
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Software IO TLB disabled
> vmalloc area: cc800000-f4ffe000, maxmem 2d7fe000
> Memory: 168448k/192512k available (2030k kernel code, 15688k reserved,
> 1079k data, 180k init, 0k highmem)
> virtual kernel memory layout:
> fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
> pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
> vmalloc : 0xcc800000 - 0xf4ffe000 ( 647 MB)
> lowmem : 0xc0000000 - 0xcbc00000 ( 188 MB)
> .init : 0xc130e000 - 0xc133b000 ( 180 kB)
> .data : 0xc11fb8b9 - 0xc1309714 (1079 kB)
> .text : 0xc1000000 - 0xc11fb8b9 (2030 kB)
> Checking if this processor honours the WP bit even in supervisor mode...
> Ok.
> Calibrating delay using timer specific routine.. 4512.90 BogoMIPS
> (lpj=9025800)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 11k freed
> Brought up 1 CPUs
> Grant table initialized
> NET: Registered protocol family 16
> Brought up 1 CPUs
> PCI: Fatal: No config space access function found
> PCI: setting up Xen PCI frontend stub
> Setting up standard PCI resources
> BUG: at kernel/fork.c:994 copy_process()
> [<c1005d9e>] show_trace_log_lvl+0x1a/0x2f
> [<c1006347>] show_trace+0x12/0x14
> [<c10063c2>] dump_stack+0x16/0x18
> [<c101d040>] copy_process+0x195/0x1245
> [<c101e140>] do_fork+0x50/0x117
> [<c1003351>] kernel_thread+0x8e/0x96
> [<c102c6fd>] __call_usermodehelper+0x2d/0x46
> [<c102cd4b>] run_workqueue+0x89/0x145
> [<c102d70d>] worker_thread+0xd5/0x102
> [<c102ff23>] kthread+0xb3/0xdc
> [<c10058df>] kernel_thread_helper+0x7/0x10
> =======================
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> xen_mem: Initialising balloon driver.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: System does not support PCI
> PCI: System does not support PCI
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 6, 262144 bytes)
> TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
> TCP: Hash tables configured (established 8192 bind 4096)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 7272k freed
> IA-32 Microcode Update Driver: v1.14-xen <tigran at veritas.com>
> audit: initializing netlink socket (disabled)
> audit(1202740570.370:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> rtc: IRQ 8 is not free.
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
> input: Macintosh mouse button emulation as /class/input/input0
> Xen virtual console successfully installed as xvc0
> Event-channel device installed.
> usbcore: registered new interface driver libusual
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> mice: PS/2 mouse device common for all mice
> TCP bic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI No-Shortcut mode
> XENBUS: Device with no driver: device/vbd/2049
> XENBUS: Device with no driver: device/vbd/2050
> Freeing unused kernel memory: 180k freed
> Write protecting the kernel read-only data: 762k
> Registering block device major 8
> blkfront: sda1: barriers enabled
> blkfront: sda2: barriers enabled
> USB Universal Host Controller Interface driver v3.0
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> SCSI subsystem initialized
> register_blkdev: cannot get major 8 for sd
> libata version 2.00 loaded.
> netfront: Initialising virtual ethernet driver.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 65528k swap on /dev/sda2. Priority:-1 extents:1 across:65528k
> EXT3 FS on sda1, internal journal
>
>
> --
> Fedora-xen mailing list
> Fedora-xen at redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-xen
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/fedora-xen/attachments/20080222/92d1c0de/attachment.htm>
More information about the Fedora-xen
mailing list