[Freeipa-users] ipa-replica-manage list fail on server 2
barrykfl at gmail.com
barrykfl at gmail.com
Wed Jul 16 02:22:59 UTC 2014
Hi:
There is only one info may relate to the ssl can;t contact any idea? it is
using Godaddy cert *.abc.com without error on starting ipa
[16/Jul/2014:10:01:38 +0800] conn=1018090 fd=72 slot=72 SSL connection from
192.168.15.88 to 192.168.15.88
[16/Jul/2014:10:01:38 +0800] conn=1018090 op=-1 fd=72 closed - Peer does
not recognize and trust the CA that issued your certificate
BTW ...after chanage the deadlock .paramter
nsslapd-db-deadlock-policy: 9 to 6 ..is it neccesary restart server ? any
command can force update?
2014-07-15 23:38 GMT+08:00 Rob Crittenden <rcritten at redhat.com>:
> barrykfl at gmail.com wrote:
> > What it is meant ? u meant enable annoynomus access ? return back to
> 389 ?
> > How to remove the can't connect LDAP server ?
>
> I meant neither of those.
>
> Watch the 389-ds access log when running ipa-replica-manage list
>
> Find the connection, note the error, if any.
>
> rob
>
> >
> >
> > 2014-07-15 22:29 GMT+08:00 Rob Crittenden <rcritten at redhat.com
> > <mailto:rcritten at redhat.com>>:
> >
> > Rich Megginson wrote:
> > > On 07/14/2014 05:58 PM, barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com> wrote:
> > >> kinit work , can input password
> > >>
> > >> any ipa command fail even ipa replica-manage status command
> >>"cant
> > >> contact ldap server"
> > >
> > > Assuming that ldapsearch works, this sounds like the ipa command
> line
> > > tool can't communicate with the httpd server? Any errors in
> > > /var/log/httpd/error_log?
> >
> > ipa-replica-manage only uses direct LDAP (maybe a little GSSAPI for
> good
> > measure).
> >
> > It also uses port 636 so at this point I suspect it is an SSL trust
> > issue. If you watch the access log you should see the connection
> attempt
> > and result.
> >
> > rob
> >
> > >
> > >>
> > >>
> > >> 2014-07-15 0:03 GMT+08:00 Rich Megginson <rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com>
> > >> <mailto:rmeggins at redhat.com <mailto:rmeggins at redhat.com>>>:
> > >>
> > >> On 07/13/2014 08:51 PM, barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >> <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> wrote:
> > >>> Hi:
> > >>>
> > >>> Only for the servers that are getting the "DB_LOCK_DEADLOCK:
> > >>> Locker killed to resolve a deadlock" message in the errors
> log.
> > >>>
> > >>> > need restart ipactl service after modifcation?
> > >>>
> > >>> But this does not explain the "cant contact ldap server"
> errors.
> > >>>
> > >>> Which ipa commands give the "cant contact ldap server"
> errors?
> > >>>
> > >>> > server2.abc.com <http://server2.abc.com>
> > <http://server2.abc.com> and command related
> > >>> ipa shown can't contact ldap sver , log shown before.
> > >>
> > >> Does this mean that
> > >> ipa user-find
> > >> on server2.abc.com <http://server2.abc.com>
> > <http://server2.abc.com> gives a "cant contact
> > >> ldap server" error?
> > >>
> > >> Or is it only the ipa replica-manage status command that gives
> > >> this error?
> > >>
> > >> If it is the former, does ldapsearch work? Does kinit work?
> > >>
> > >>>
> > >>>
> > >>> 2014-07-11 21:55 GMT+08:00 Rich Megginson
> > <rmeggins at redhat.com <mailto:rmeggins at redhat.com>
> > >>> <mailto:rmeggins at redhat.com <mailto:rmeggins at redhat.com>>>:
> > >>>
> > >>> On 07/11/2014 01:53 AM, barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >>> <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > wrote:
> > >>>> At server 2 there is a error:
> > >>>>
> > >>>>
> > >>>> [10/Jul/2014:12:29:59 +0800] NSMMReplicationPlugin -
> > >>>> agmt="cn=meToserver1.abc.com
> > <http://meToserver1.abc.com> <http://meToserver1.abc.com>"
> > >>>> (central:389): Replication bind with GSSAPI auth failed:
> > >>>> LDAP error -2 (Local error) (SASL(-1): generic failure:
> > >>>> GSSAPI Error: Unspecified GSS failure. Minor code may
> > >>>> provide more information (Credentials cache file
> > >>>> '/tmp/krb5cc_494' not found))
> > >>>
> > >>> This is usually a transient error that should go away.
> > >>>
> > >>>>
> > >>>>
> > >>>> 2014-07-11 10:26 GMT+08:00 <barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >>>> <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com
> >>>:
> > >>>>
> > >>>> Yes ,
> > >>>> still get "cant contact ldap server" after upgrading
> > >>>> both servers.
> > >>>>
> > >>>>
> > >>>> 2014-07-10 23:18 GMT+08:00 Rich Megginson
> > >>>> <rmeggins at redhat.com <mailto:rmeggins at redhat.com>
> > <mailto:rmeggins at redhat.com <mailto:rmeggins at redhat.com>>>:
> > >>>>
> > >>>> On 07/10/2014 09:15 AM, barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >>>> <mailto:barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>> wrote:
> > >>>>>
> > >>>>> But any hint that server 2 say cant contact
> ldap
> > >>>>> server if type ipa command?
> > >>>>>
> > >>>>
> > >>>> Please keep replies on list.
> > >>>>
> > >>>> You still get "cant contact ldap server" after
> > >>>> upgrading both servers?
> > >>>>
> > >>>>> 2014/7/10 下午10:25 於 "Rich Megginson"
> > >>>>> <rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com> <mailto:rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com>>>
> > >>>>> 寫道：
> > >>>>>
> > >>>>> On 07/10/2014 01:14 AM, barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >>>>> <mailto:barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>> wrote:
> > >>>>>> Tried and now two version same ....but
> seem
> > >>>>>> same situation.
> > >>>>>>
> > >>>>>> i found a related error log that server1
> has
> > >>>>>> account after added user but not
> > replicated to
> > >>>>>> server2. Is it too fast on UI clicking ?
> as i
> > >>>>>> exp once that click very
> > >>>>>> fast twice add and edit user may cause
> server
> > >>>>>> 2 no record.
> > >>>>>>
> > >>>>>>
> > >>>>>> [10/Jul/2014:14:20:01 +0800]
> > >>>>>> NSMMReplicationPlugin - changelog program
> -
> > >>>>>> _cl5WriteOperationTxn: retry (49) the
> > >>>>>> transaction (csn=53be3097000000040000)
> failed
> > >>>>>> (rc=-30994 (DB_LOCK_DEADLOCK: Locker
> > killed to
> > >>>>>> resolve a deadlock))
> > >>>>>> [10/Jul/2014:14:20:01 +0800]
> > >>>>>> NSMMReplicationPlugin - changelog program
> -
> > >>>>>> _cl5WriteOperationTxn: failed to write
> entry
> > >>>>>> with csn (53be3097000000040000); db error
> -
> > >>>>>> -30994 DB_LOCK_DEADLOCK: Locker killed to
> > >>>>>> resolve a deadlock
> > >>>>>> [10/Jul/2014:14:20:01 +0800]
> > >>>>>> NSMMReplicationPlugin -
> > >>>>>> write_changelog_and_ruv: can't add a
> change
> > >>>>>> for
> > >>>>>>
> > uid=xuehuimei,cn=users,cn=accounts,dc=abc,dc=com
> > >>>>>> (uniqid:
> 1300de84-07fa11e4-b3ddf885-593f3a7a,
> > >>>>>> optype: 16) to changelog csn
> > 53be3097000000040000
> > >>>>>> [10/Jul/2014:14:56:51 +0800]
> > >>>>>> NSMMReplicationPlugin - changelog program
> -
> > >>>>>> _cl5WriteOperationTxn: retry (49) the
> > >>>>>> transaction (csn=53be3939000000040000)
> failed
> > >>>>>> (rc=-30994 (DB_LOCK_DEADLOCK: Locker
> > killed to
> > >>>>>> resolve a deadlock))
> > >>>>>> [10/Jul/2014:14:56:51 +0800]
> > >>>>>> NSMMReplicationPlugin - changelog program
> -
> > >>>>>> _cl5WriteOperationTxn: failed to write
> entry
> > >>>>>> with csn (53be3939000000040000); db error
> -
> > >>>>>> -30994 DB_LOCK_DEADLOCK: Locker killed to
> > >>>>>> resolve a deadlock
> > >>>>>> [10/Jul/2014:14:56:51 +0800]
> > >>>>>> NSMMReplicationPlugin -
> > >>>>>> write_changelog_and_ruv: can't add a
> change
> > >>>>>> for
> > >>>>>>
> > uid=websubcon04,cn=users,cn=accounts,dc=abc,dc=com
> > >>>>>> (uniqid:
> 3e39fc81-07ff11e4-b3ddf885-593f3a7a,
> > >>>>>> optype: 16) to changelog csn
> > 53be3939000000040000
> > >>>>>
> > >>>>> This looks like
> > >>>>> https://fedorahosted.org/389/ticket/47409
> and
> > >>>>>
> > https://bugzilla.redhat.com/show_bug.cgi?id=979169
> > >>>>>
> > >>>>> Cause: Under certain conditions, with a
> mix of
> > >>>>> concurrent search and update and outgoing
> > >>>>> replication operations, there will be
> > deadlocks
> > >>>>> in the changelog db, leading to error
> messages
> > >>>>> like this:
> > >>>>> NSMMReplicationPlugin - changelog program -
> > >>>>> _cl5WriteOperationTxn: failed to write
> entry
> > >>>>> with csn (XXXXXXX); db error - -30994
> > >>>>> DB_LOCK_DEADLOCK: Locker killed to resolve
> a
> > >>>>> deadlock
> > >>>>> This is caused by a deadlock between the
> > >>>>> changelog readers, writers, and main
> database
> > >>>>> writers.
> > >>>>>
> > >>>>> Consequence: Update operations will fail
> with
> > >>>>> the above error message in the directory
> > server
> > >>>>> errors log.
> > >>>>>
> > >>>>> Fix: A new configuration parameter is
> > introduced:
> > >>>>> dn: cn=config,cn=ldbm
> > database,cn=plugins,cn=config
> > >>>>> nsslapd-db-deadlock-policy: 9
> > >>>>>
> > >>>>> With the default policy 9
> (DB_LOCK_YOUNGEST),
> > >>>>> the last locker gets killed when there is a
> > >>>>> deadlock. In the case that this is the
> > >>>>> changelog writer, the write will fail, and
> the
> > >>>>> entire update will fail.
> > >>>>>
> > >>>>> Users who frequently see the above errors
> in
> > >>>>> the errors log are advised to change this
> > >>>>> setting to 6 (DB_LOCK_MINWRITE) will which
> > >>>>> instead kill the locker that has the fewest
> > >>>>> write locks (that is, the changelog
> reader).
> > >>>>> The changelog reader code has been changed
> to
> > >>>>> handle this deadlock condition and retry.
> The
> > >>>>> setting can be changed like this:
> > >>>>>
> > >>>>> ldapmodify -x -D "cn=directory manager" -W
> > <<EOF
> > >>>>> dn: cn=config,cn=ldbm
> > database,cn=plugins,cn=config
> > >>>>> changetype: modify
> > >>>>> replace: nsslapd-db-deadlock-policy
> > >>>>> nsslapd-db-deadlock-policy: 6
> > >>>>> EOF
> > >>>>>
> > >>>>> You may ask why the default is not changed
> to
> > >>>>> 6. The answer is that the setting will
> apply
> > >>>>> to _all_ threads, so that changing this
> > setting
> > >>>>> could cause regular search requests to
> > fail, if
> > >>>>> the directory server is under a heavy
> update
> > >>>>> load. In our testing, we did not see this
> > >>>>> happen, but we cannot guarantee that
> changing
> > >>>>> this value to 6 will not impact regular
> search
> > >>>>> requests.
> > >>>>>
> > >>>>> Result: After changing
> > >>>>> nsslapd-db-deadlock-policy to 6, updates
> will
> > >>>>> succeed and no longer cause errors like
> > the above.
> > >>>>>
> > >>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>> 2014-07-10 10:40 GMT+08:00 Rich Megginson
> > >>>>>> <rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com>
> > >>>>>> <mailto:rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com>>>:
> > >>>>>>
> > >>>>>> On 07/09/2014 08:36 PM,
> > barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>> <mailto:barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>> wrote:
> > >>>>>>> Hi :
> > >>>>>>>
> > >>>>>>> What is the procedure for this minor
> > update ?
> > >>>>>>>
> > >>>>>>> just yum update ipa-server after
> > stop the
> > >>>>>>> server?
> > >>>>>>
> > >>>>>> If you just want to upgrade only the
> LDAP
> > >>>>>> server, which is the component that I
> for
> > >>>>>> sure know is out of date, then yum
> update
> > >>>>>> 389-ds-base.
> > >>>>>>
> > >>>>>> Or just "yum update" - in general I
> don't
> > >>>>>> like running "franken-systems" which
> have
> > >>>>>> a mix of up-to-date and out of date
> > >>>>>> packages. Note that "IPA server" is
> > >>>>>> composed of several packages.
> > >>>>>>
> > >>>>>> You do not need to stop the server.
> > >>>>>> yum/rpm upgrade will restart as
> needed.
> > >>>>>> If you want to make sure, do ipactl
> > >>>>>> restart after upgrade.
> > >>>>>>
> > >>>>>>
> > >>>>>>> and effect of the exsitn ldap?
> > >>>>>>
> > >>>>>> Not sure what you mean. Upgrade
> should
> > >>>>>> not touch any config or data.
> > >>>>>>
> > >>>>>>
> > >>>>>>>
> > >>>>>>> As the server 2 is master of replica
> > also
> > >>>>>>> , so need refo ipa-replica install ?
> > >>>>>>
> > >>>>>> No, you just need to perform the same
> > >>>>>> upgrade procedure.
> > >>>>>>
> > >>>>>>
> > >>>>>>>
> > >>>>>>> barry
> > >>>>>>>
> > >>>>>>>
> > >>>>>>> 2014-07-09 22:20 GMT+08:00 Rich
> > Megginson
> > >>>>>>> <rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com>
> > >>>>>>> <mailto:rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com>>>:
> > >>>>>>>
> > >>>>>>> On 07/08/2014 09:02 PM,
> > >>>>>>> barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >>>>>>> <mailto:barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>> wrote:
> > >>>>>>>> Some error i found :
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>> server1.abc.com:636
> > <http://server1.abc.com:636>
> > >>>>>>>> <http://server1.abc.com:636>
> > >>>>>>>> (/etc/dirsrv/slapd-abc-COM)
> > >>>>>>>>
> > >>>>>>>> [29/Jun/2014:02:00:56 +0800] -
> > >>>>>>>> 389-Directory/1.2.11.25
> > <http://1.2.11.25>
> > >>>>>>>> <http://1.2.11.25>
> B2013.325.1951
> > >>>>>>>> starting up
> > >>>>>>>> [29/Jun/2014:02:00:56 +0800]
> > >>>>>>>> attrcrypt -
> attrcrypt_unwrap_key:
> > >>>>>>>> failed to unwrap key for cipher
> AES
> > >>>>>>>> [29/Jun/2014:02:00:56 +0800]
> > >>>>>>>> attrcrypt -
> attrcrypt_cipher_init:
> > >>>>>>>> symmetric key failed to unwrap
> with
> > >>>>>>>> the private key; Cert might have
> > >>>>>>>> been renewed since the key is
> > >>>>>>>> wrapped. To recover the
> encrypted
> > >>>>>>>> contents, keep the wrapped
> > symmetric
> > >>>>>>>> key value.
> > >>>>>>>> [29/Jun/2014:02:00:56 +0800]
> > >>>>>>>> attrcrypt -
> attrcrypt_unwrap_key:
> > >>>>>>>> failed to unwrap key for cipher
> > 3DES
> > >>>>>>>> [29/Jun/2014:02:00:56 +0800]
> > >>>>>>>> attrcrypt -
> attrcrypt_cipher_init:
> > >>>>>>>> symmetric key failed to unwrap
> with
> > >>>>>>>> the private key; Cert might have
> > >>>>>>>> been renewed since the key is
> > >>>>>>>> wrapped. To recover the
> encrypted
> > >>>>>>>> contents, keep the wrapped
> > symmetric
> > >>>>>>>> key value.
> > >>>>>>>> [29/Jun/2014:02:00:56 +0800]
> > >>>>>>>> attrcrypt - All prepared
> > ciphers are
> > >>>>>>>> not available. Please disable
> > >>>>>>>> attribute encryption.
> > >>>>>>>> [29/Jun/2014:02:00:56 +0800]
> > >>>>>>>> schema-compat-plugin - warning:
> no
> > >>>>>>>> entries set up under
> cn=computers,
> > >>>>>>>> cn=compat,dc=abc,dc=com
> > >>>>>>>> [29/Jun/2014:02:00:57 +0800]
> > >>>>>>>> schema-compat-plugin - warning:
> no
> > >>>>>>>> entries set up under cn=ng,
> > >>>>>>>> cn=compat,dc=abc,dc=com
> > >>>>>>>> [29/Jun/2014:02:00:57 +0800]
> > >>>>>>>> schema-compat-plugin - warning:
> no
> > >>>>>>>> entries set up under
> > >>>>>>>> ou=sudoers,dc=abc,dc=com
> > >>>>>>>> [29/Jun/2014:02:00:57 +0800] -
> > >>>>>>>> Skipping CoS Definition
> cn=Password
> > >>>>>>>>
> > Policy,cn=accounts,dc=abc,dc=com--no
> > >>>>>>>> CoS Templates found, which
> > should be
> > >>>>>>>> added before the CoS Definition.
> > >>>>>>>> [29/Jun/2014:02:00:57 +0800]
> > >>>>>>>> set_krb5_creds - Could not get
> > >>>>>>>> initial credentials for
> principal
> > >>>>>>>> [ldap/server1.abc.com at abc.COM
> > >>>>>>>> <mailto:ldap
> > <mailto:ldap>/server1.abc.com at abc.COM>]
> > >>>>>>>> in keytab
> > >>>>>>>> [FILE:/etc/dirsrv/ds.keytab]:
> > >>>>>>>> -1765328228 (Cannot contact any
> KDC
> > >>>>>>>> for requested realm)
> > >>>>>>>> [29/Jun/2014:02:00:58 +0800] -
> > >>>>>>>> Skipping CoS Definition
> cn=Password
> > >>>>>>>>
> > Policy,cn=accounts,dc=abc,dc=com--no
> > >>>>>>>> CoS Templates found, which
> > should be
> > >>>>>>>> added before the CoS Definition.
> > >>>>>>>> [29/Jun/2014:02:00:58 +0800]
> > >>>>>>>>
> slapd_ldap_sasl_interactive_bind -
> > >>>>>>>> Error: could not perform
> > interactive
> > >>>>>>>> bind for id [] mech [GSSAPI]:
> LDAP
> > >>>>>>>> error -2 (Local error)
> (SASL(-1):
> > >>>>>>>> generic failure: GSSAPI Error:
> > >>>>>>>> Unspecified GSS failure. Minor
> > code
> > >>>>>>>> may provide more information
> > >>>>>>>> (Credentials cache file
> > >>>>>>>> '/tmp/krb5cc_492' not found))
> errno
> > >>>>>>>> 0 (Success)
> > >>>>>>>> [29/Jun/2014:02:00:58 +0800]
> > >>>>>>>> slapi_ldap_bind - Error: could
> not
> > >>>>>>>> perform interactive bind for id
> []
> > >>>>>>>> mech [GSSAPI]: error -2 (Local
> > error)
> > >>>>>>>> [29/Jun/2014:02:00:58 +0800]
> > >>>>>>>> NSMMReplicationPlugin -
> > >>>>>>>> agmt="cn=meToserver2.abc.com
> > <http://meToserver2.abc.com>
> > >>>>>>>> <http://meToserver2.abc.com>"
> > >>>>>>>> (server2:389): Replication bind
> > with
> > >>>>>>>> GSSAPI auth failed: LDAP error
> -2
> > >>>>>>>> (Local error) (SASL(-1): generic
> > >>>>>>>> failure: GSSAPI Error:
> Unspecified
> > >>>>>>>> GSS failure. Minor code may
> > provide
> > >>>>>>>> more information (Credentials
> cache
> > >>>>>>>> file '/tmp/krb5cc_492' not
> found))
> > >>>>>>>> [29/Jun/2014:02:00:58 +0800] -
> > slapd
> > >>>>>>>> started. Listening on All
> > >>>>>>>> Interfaces port 389 for LDAP
> > requests
> > >>>>>>>> [29/Jun/2014:02:00:58 +0800] -
> > >>>>>>>> Listening on All Interfaces
> > port 636
> > >>>>>>>> for LDAPS requests
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>> 389-Directory/1.2.11.15
> > <http://1.2.11.15>
> > >>>>>>>> <http://1.2.11.15>
> B2013.240.174
> > >>>>>>>> server2.abc.com:636
> > <http://server2.abc.com:636>
> > >>>>>>>> <http://server2.abc.com:636>
> > >>>>>>>> (/etc/dirsrv/slapd-abc-COM)
> > >>>>>>>>
> > >>>>>>>> [30/Jun/2014:12:51:31 +0800]
> > >>>>>>>>
> slapd_ldap_sasl_interactive_bind -
> > >>>>>>>> Error: could not perform
> > interactive
> > >>>>>>>> bind for id [] mech [GSSAPI]:
> LDAP
> > >>>>>>>> error -2 (Local error)
> (SASL(-1):
> > >>>>>>>> generic failure: GSSAPI Error:
> > >>>>>>>> Unspecified GSS failure. Minor
> > code
> > >>>>>>>> may provide more information
> > (Ticket
> > >>>>>>>> expired)) errno 0 (Success)
> > >>>>>>>> [30/Jun/2014:12:51:31 +0800]
> > >>>>>>>>
> slapd_ldap_sasl_interactive_bind -
> > >>>>>>>> Error: could not perform
> > interactive
> > >>>>>>>> bind for id [] mech [GSSAPI]:
> LDAP
> > >>>>>>>> error -2 (Local error)
> (SASL(-1):
> > >>>>>>>> generic failure: GSSAPI Error:
> > >>>>>>>> Unspecified GSS failure. Minor
> > code
> > >>>>>>>> may provide more information
> > (Ticket
> > >>>>>>>> expired)) errno 0 (Success)
> > >>>>>>>> [30/Jun/2014:12:51:31 +0800]
> > >>>>>>>> slapi_ldap_bind - Error: could
> not
> > >>>>>>>> perform interactive bind for id
> []
> > >>>>>>>> mech [GSSAPI]: error -2 (Local
> > error)
> > >>>>>>>> [30/Jun/2014:12:51:31 +0800]
> > >>>>>>>> NSMMReplicationPlugin -
> > >>>>>>>> agmt="cn=meToserver1.abc.com
> > <http://meToserver1.abc.com>
> > >>>>>>>> <http://meToserver1.abc.com>"
> > >>>>>>>> (server1:389): Replication bind
> > with
> > >>>>>>>> GSSAPI auth failed: LDAP error
> -2
> > >>>>>>>> (Local error) (SASL(-1): generic
> > >>>>>>>> failure: GSSAPI Error:
> Unspecified
> > >>>>>>>> GSS failure. Minor code may
> > provide
> > >>>>>>>> more information (Ticket
> expired))
> > >>>>>>>> [30/Jun/2014:12:51:34 +0800]
> > >>>>>>>>
> slapd_ldap_sasl_interactive_bind -
> > >>>>>>>> Error: could not perform
> > interactive
> > >>>>>>>> bind for id [] mech [GSSAPI]:
> LDAP
> > >>>>>>>> error -2 (Local error)
> (SASL(-1):
> > >>>>>>>> generic failure: GSSAPI Error:
> > >>>>>>>> Unspecified GSS failure. Minor
> > code
> > >>>>>>>> may provide more information
> > (Ticket
> > >>>>>>>> expired)) errno 0 (Success)
> > >>>>>>>> [30/Jun/2014:12:51:35 +0800]
> > >>>>>>>>
> slapd_ldap_sasl_interactive_bind -
> > >>>>>>>> Error: could not perform
> > interactive
> > >>>>>>>> bind for id [] mech [GSSAPI]:
> LDAP
> > >>>>>>>> error -2 (Local error)
> (SASL(-1):
> > >>>>>>>> generic failure: GSSAPI Error:
> > >>>>>>>> Unspecified GSS failure. Minor
> > code
> > >>>>>>>> may provide more information
> > (Ticket
> > >>>>>>>> expired)) errno 0 (Success)
> > >>>>>>>> [30/Jun/2014:12:51:35 +0800]
> > >>>>>>>> slapi_ldap_bind - Error: could
> not
> > >>>>>>>> perform interactive bind for id
> []
> > >>>>>>>> mech [GSSAPI]: error -2 (Local
> > error)
> > >>>>>>>> [30/Jun/2014:12:51:40 +0800]
> > >>>>>>>>
> slapd_ldap_sasl_interactive_bind -
> > >>>>>>>> Error: could not perform
> > interactive
> > >>>>>>>> bind for id [] mech [GSSAPI]:
> LDAP
> > >>>>>>>> error -2 (Local error)
> (SASL(-1):
> > >>>>>>>> generic failure: GSSAPI Error:
> > >>>>>>>> Unspecified GSS failure. Minor
> > code
> > >>>>>>>> may provide more information
> > (Ticket
> > >>>>>>>> expired)) errno 0 (Success)
> > >>>>>>>> [30/Jun/2014:12:51:40 +0800]
> > >>>>>>>>
> slapd_ldap_sasl_interactive_bind -
> > >>>>>>>> Error: could not perform
> > interactive
> > >>>>>>>> bind for id [] mech [GSSAPI]:
> LDAP
> > >>>>>>>> error -2 (Local error)
> (SASL(-1):
> > >>>>>>>> generic failure: GSSAPI Error:
> > >>>>>>>> Unspecified GSS failure. Minor
> > code
> > >>>>>>>> may provide more information
> > (Ticket
> > >>>>>>>> expired)) errno 0 (Success)
> > >>>>>>>> [30/Jun/2014:12:51:40 +0800]
> > >>>>>>>> slapi_ldap_bind - Error: could
> not
> > >>>>>>>> perform interactive bind for id
> []
> > >>>>>>>> mech [GSSAPI]: error -2 (Local
> > error)
> > >>>>>>>> [30/Jun/2014:12:51:52 +0800]
> > >>>>>>>> NSMMReplicationPlugin -
> > >>>>>>>> agmt="cn=meToserver1.abc.com
> > <http://meToserver1.abc.com>
> > >>>>>>>> <http://meToserver1.abc.com>"
> > >>>>>>>> (server1:389): Replication bind
> > with
> > >>>>>>>> GSSAPI auth resumed
> > >>>>>>>>
> > >>>>>>>
> > >>>>>>> You are using an older version of
> > >>>>>>> 389. The version on server2 is
> > older
> > >>>>>>> than the version on server1.
> > Can you
> > >>>>>>> upgrade and see if that fixes
> your
> > >>>>>>> problems? Even if it doesn't fix
> > >>>>>>> your problems, it will be much
> > easier
> > >>>>>>> for us to support.
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>>
> > >>>>>>>> 2014-07-09 10:55 GMT+08:00
> > >>>>>>>> <barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >>>>>>>> <mailto:barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>>>:
> > >>>>>>>>
> > >>>>>>>> FYI..
> > >>>>>>>> 160: [04/Jul/2014:12:35:30
> > >>>>>>>> +0800] conn=936207 fd=73
> > slot=73
> > >>>>>>>> connection from
> 192.168.156.89
> > >>>>>>>> to 192.168.156.89
> > >>>>>>>> 163: [04/Jul/2014:12:35:30
> > >>>>>>>> +0800] conn=936207 op=-1
> fd=73
> > >>>>>>>> closed - B1
> > >>>>>>>>
> > >>>>>>>> There is not abt binding
> but i
> > >>>>>>>> unsure how to fix ..
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>> 2014-07-09 2:01 GMT+08:00
> Rich
> > >>>>>>>> Megginson
> > <rmeggins at redhat.com <mailto:rmeggins at redhat.com>
> > >>>>>>>> <mailto:rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com>>>:
> > >>>>>>>>
> > >>>>>>>> On 07/08/2014 02:16 AM,
> > >>>>>>>> barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > >>>>>>>> wrote:
> > >>>>>>>>> Resent as size limit.
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> Here u are server1 's
> > >>>>>>>>> access log seem one
> > side broken
> > >>>>>>>>>
> > >>>>>>>>> the problem is how to
> make
> > >>>>>>>>> it replicate again.
> > >>>>>>>>>
> > >>>>>>>>> At server 1
> > >>>>>>>>>
> > >>>>>>>>> it is ok master
> server1
> > >>>>>>>>> master server2
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> Another side server 2
> > >>>>>>>>> contains 2 ip
> replication.
> > >>>>>>>>>
> > >>>>>>>>> ipa-replica-manage list
> > >>>>>>>>> shown Can't contact
> > LDAP server
> > >>>>>>>>>
> > >>>>>>>>> I dont know why but the
> > >>>>>>>>> prolematic server is
> sever
> > >>>>>>>>> 2 not server 1
> > >>>>>>>>>
> > >>>>>>>>> log of server2
> > >>>>>>>>> [08/Jul/2014:16:02:40
> > >>>>>>>>> +0800] conn=3299731
> fd=69
> > >>>>>>>>> slot=69 connection from
> > >>>>>>>>> 192.168.15.89
> (server1) to
> > >>>>>>>>> 192.168.15.88(server2)
> > >>>>>>>>> [08/Jul/2014:16:02:40
> > >>>>>>>>> +0800] conn=3299731
> op=-1
> > >>>>>>>>> fd=69 closed - B1
> > >>>>>>>>> [08/Jul/2014:16:02:40
> > >>>>>>>>> +0800] conn=3299732
> fd=69
> > >>>>>>>>> slot=69 connection from
> > >>>>>>>>> 192.168.15.89 to
> > 192.168.15.88
> > >>>>>>>>> [08/Jul/2014:16:02:40
> > >>>>>>>>> +0800] conn=3299732
> op=-1
> > >>>>>>>>> fd=69 closed - B1
> > >>>>>>>>> [08/Jul/2014:16:02:41
> > >>>>>>>>> +0800] conn=3299733
> fd=69
> > >>>>>>>>> slot=69 connection from
> > >>>>>>>>> 192.168.15.89 to
> > 192.168.15.88
> > >>>>>>>>> [08/Jul/2014:16:02:41
> > >>>>>>>>> +0800] conn=3299733
> op=-1
> > >>>>>>>>> fd=69 closed - B1
> > >>>>>>>>
> > >>>>>>>> You never answered my
> > >>>>>>>> question below. "Are
> you
> > >>>>>>>> sure that this
> > connection is
> > >>>>>>>> a replication session?
> Can
> > >>>>>>>> you post all of the
> > >>>>>>>> operations from the
> access
> > >>>>>>>> log from conn=936207?"
> > >>>>>>>>
> > >>>>>>>> In the future, please
> avoid
> > >>>>>>>> spamming the list with
> > large
> > >>>>>>>> log files. In general,
> > it's
> > >>>>>>>> better to provide
> excerpts
> > >>>>>>>> from the log files
> showing
> > >>>>>>>> the problem, paste them
> to
> > >>>>>>>> fpaste.org
> > <http://fpaste.org>
> > >>>>>>>> <http://fpaste.org>,
> and
> > >>>>>>>> post the link to the
> > mailing
> > >>>>>>>> list. If for some
> reason
> > >>>>>>>> you need to post a large
> > >>>>>>>> file, please use a file
> > >>>>>>>> sharing service and
> > post the
> > >>>>>>>> link to the file.
> > >>>>>>>>
> > >>>>>>>> Can you take a look at
> your
> > >>>>>>>> errors log from server
> > 1 and
> > >>>>>>>> server 2 and see if
> there
> > >>>>>>>> are any relevant errors?
> > >>>>>>>>
> > >>>>>>>> If I had to guess, I
> would
> > >>>>>>>> say that there is some
> sort
> > >>>>>>>> of network error between
> > >>>>>>>> server 1 and server 2
> that
> > >>>>>>>> causes the excessive
> closed
> > >>>>>>>> - B1. Perhaps there
> > will be
> > >>>>>>>> more information in the
> > >>>>>>>> errors log.
> > >>>>>>>>
> > >>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>> 2014-07-07 22:21
> GMT+08:00
> > >>>>>>>>> Rich Megginson
> > >>>>>>>>> <rmeggins at redhat.com
> > <mailto:rmeggins at redhat.com>
> > >>>>>>>>>
> > <mailto:rmeggins at redhat.com <mailto:rmeggins at redhat.com>>>:
> > >>>>>>>>>
> > >>>>>>>>> On 07/04/2014
> > 03:28 AM,
> > >>>>>>>>> barrykfl at gmail.com
> > <mailto:barrykfl at gmail.com>
> > >>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > >>>>>>>>> wrote:
> > >>>>>>>>>> FOUND something
> > >>>>>>>>>> strange that
> server 1
> > >>>>>>>>>> replicate to
> itself
> > >>>>>>>>>> rather than
> server2
> > >>>>>>>>>>
> > >>>>>>>>>> Server1 access
> > log > Wrong
> > >>>>>>>>>>
> [04/Jul/2014:12:35:30
> > >>>>>>>>>> +0800] conn=936207
> > >>>>>>>>>> fd=73 slot=73
> > >>>>>>>>>> connection from
> > >>>>>>>>>> 192.168.15.89(
> > server1
> > >>>>>>>>>> ) to
> 192.168.15.89
> > >>>>>>>>>> (server1)
> > >>>>>>>>>
> > >>>>>>>>> Are you sure that
> this
> > >>>>>>>>> connection is a
> > >>>>>>>>> replication
> session?
> > >>>>>>>>> Can you post all
> > of the
> > >>>>>>>>> operations from the
> > >>>>>>>>> access log from
> > >>>>>>>>> conn=936207?
> > >>>>>>>>>
> > >>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>> Server 2 access
> > log > OK
> > >>>>>>>>>>
> [04/Jul/2014:12:35:30
> > >>>>>>>>>> +0800] conn=936208
> > >>>>>>>>>> fd=74 slot=74
> > >>>>>>>>>> connection from
> > >>>>>>>>>>
> > 192.168.15.89(server2)
> > >>>>>>>>>> to 192.168.15.88
> > (server2)
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>> 2014-07-04 9:25
> > >>>>>>>>>> GMT+08:00
> > >>>>>>>>>>
> > <barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>>:
> > >>>>>>>>>>
> > >>>>>>>>>> Just sure now
> one
> > >>>>>>>>>> side flow is
> > >>>>>>>>>> broken, if u
> > >>>>>>>>>> update
> server1 ,
> > >>>>>>>>>> it 100% work
> > >>>>>>>>>> server2 will
> > upgrade.
> > >>>>>>>>>> but if u
> update
> > >>>>>>>>>> server2 there
> is
> > >>>>>>>>>> chance
> > non-syn e.g
> > >>>>>>>>>> it create
> > username
> > >>>>>>>>>> in server1
> with
> > >>>>>>>>>> posfix grp >ok
> > >>>>>>>>>> but in
> server2 it
> > >>>>>>>>>> only created
> > >>>>>>>>>> posfix grp
> but no
> > >>>>>>>>>> username
> > >>>>>>>>>> /attribute it
> > >>>>>>>>>> occur serveral
> > >>>>>>>>>> times. I have
> to
> > >>>>>>>>>> use command
> line
> > >>>>>>>>>> grp del
> > ...etc. to
> > >>>>>>>>>> force del
> > them and
> > >>>>>>>>>> recreate
> them.,.
> > >>>>>>>>>>
> > >>>>>>>>>> Result below:
> > >>>>>>>>>>
> > >>>>>>>>>>
> > server2.abc.com <http://server2.abc.com>
> > >>>>>>>>>>
> > <http://server2.abc.com>:
> > >>>>>>>>>> replica
> > >>>>>>>>>> last init
> > >>>>>>>>>> status: None
> > >>>>>>>>>> last init
> > ended:
> > >>>>>>>>>> None
> > >>>>>>>>>> last update
> > >>>>>>>>>> status: 0
> Replica
> > >>>>>>>>>> acquired
> > >>>>>>>>>> successfully:
> > >>>>>>>>>> Incremental
> > update
> > >>>>>>>>>> succeeded
> > >>>>>>>>>> last update
> > >>>>>>>>>> ended:
> 2014-07-04
> > >>>>>>>>>> 00:33:18+00:00
> > >>>>>>>>>>
> > >>>>>>>>>> Directory
> Manager
> > >>>>>>>>>> password:
> > >>>>>>>>>>
> > >>>>>>>>>>
> > server1.abc.com <http://server1.abc.com>
> > >>>>>>>>>>
> > <http://server1.abc.com>:
> > >>>>>>>>>> replica
> > >>>>>>>>>> last init
> > >>>>>>>>>> status: 0
> Total
> > >>>>>>>>>> update
> succeeded
> > >>>>>>>>>> last init
> > ended:
> > >>>>>>>>>> 2014-06-20
> > >>>>>>>>>> 10:07:02+00:00
> > >>>>>>>>>> last update
> > >>>>>>>>>> status: 0
> Replica
> > >>>>>>>>>> acquired
> > >>>>>>>>>> successfully:
> > >>>>>>>>>> Incremental
> > update
> > >>>>>>>>>> succeeded
> > >>>>>>>>>> last update
> > >>>>>>>>>> ended:
> 2014-07-04
> > >>>>>>>>>> 01:14:19+00:00
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > [root@(LIVE)server2 ~]$
> > >>>>>>>>>> ipactl status
> > >>>>>>>>>> Directory
> > Service:
> > >>>>>>>>>> RUNNING
> > >>>>>>>>>> KDC Service:
> > RUNNING
> > >>>>>>>>>> KPASSWD
> Service:
> > >>>>>>>>>> RUNNING
> > >>>>>>>>>> MEMCACHE
> Service:
> > >>>>>>>>>> RUNNING
> > >>>>>>>>>> HTTP Service:
> > RUNNING
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>> 2014-07-04
> 1:34
> > >>>>>>>>>> GMT+08:00 Rob
> > >>>>>>>>>> Crittenden
> > >>>>>>>>>>
> > <rcritten at redhat.com <mailto:rcritten at redhat.com>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>>>:
> > >>>>>>>>>>
> > >>>>>>>>>>
> > >>>>>>>>>>
> > barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > >>>>>>>>>> wrote:
> > >>>>>>>>>> > Yes
> > they are
> > >>>>>>>>>> running.
> > >>>>>>>>>> Server 1
> can
> > >>>>>>>>>> syn to
> > server2
> > >>>>>>>>>> but error
> at
> > >>>>>>>>>> server 2
> > >>>>>>>>>> > like
> this.
> > >>>>>>>>>>
> > >>>>>>>>>> How do you
> > >>>>>>>>>> know
> server 1
> > >>>>>>>>>> is syncing
> > >>>>>>>>>> with
> > server 2?
> > >>>>>>>>>>
> > >>>>>>>>>> On server
> 1
> > >>>>>>>>>> I'd run:
> > >>>>>>>>>>
> > >>>>>>>>>>
> > ipa-replica-manage
> > >>>>>>>>>> list -v
> > `hostname`
> > >>>>>>>>>>
> > >>>>>>>>>> This will
> > show
> > >>>>>>>>>> the
> > >>>>>>>>>>
> replication
> > >>>>>>>>>> status.
> > >>>>>>>>>>
> > >>>>>>>>>> And what
> does
> > >>>>>>>>>> ipactl
> status
> > >>>>>>>>>> show on
> > server 2?
> > >>>>>>>>>>
> > >>>>>>>>>> rob
> > >>>>>>>>>>
> > >>>>>>>>>> >
> > >>>>>>>>>> >
> 2014/7/3 下
> > >>>>>>>>>> 午10:14 於
> > >>>>>>>>>> "Rob
> > >>>>>>>>>>
> Crittenden"
> > >>>>>>>>>>
> > <rcritten at redhat.com <mailto:rcritten at redhat.com>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>>
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>>>>
> > >>>>>>>>>> 寫道：
> > >>>>>>>>>> >
> > >>>>>>>>>> >
> Please
> > >>>>>>>>>> keep
> > relies on
> > >>>>>>>>>> the list.
> > >>>>>>>>>> >
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>>
> > >>>>>>>>>> wrote:
> > >>>>>>>>>> > > I
> saw
> > >>>>>>>>>> the error
> > >>>>>>>>>> beloe and
> > >>>>>>>>>> errpr log
> is
> > >>>>>>>>>> it
> related ?
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > 29/Jun/2014:02:00:58
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapd_ldap_sasl_interactive_bind
> > >>>>>>>>>> - Error:
> > >>>>>>>>>> > >
> could
> > >>>>>>>>>> not
> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> LDAP error
> > >>>>>>>>>> > > -2
> > >>>>>>>>>> (Local
> error)
> > >>>>>>>>>> (SASL(-1):
> > >>>>>>>>>> generic
> > >>>>>>>>>> failure:
> > >>>>>>>>>> GSSAPI
> Error:
> > >>>>>>>>>>
> Unspecified
> > >>>>>>>>>> > >
> GSS
> > >>>>>>>>>> failure.
> > >>>>>>>>>> Minor
> code
> > >>>>>>>>>> may
> provide
> > >>>>>>>>>> more
> > >>>>>>>>>>
> information
> > >>>>>>>>>>
> (Credentials
> > >>>>>>>>>> >
> cache
> > >>>>>>>>>> > >
> file
> > >>>>>>>>>>
> > '/tmp/krb5cc_492'
> > >>>>>>>>>> not
> found))
> > >>>>>>>>>> errno 0
> > (Success)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [29/Jun/2014:02:00:58
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapi_ldap_bind -
> > >>>>>>>>>> Error:
> > could not
> > >>>>>>>>>> >
> perform
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> error -2
> > >>>>>>>>>> (Local
> error)
> > >>>>>>>>>> >
> > >>>>>>>>>> > I
> > >>>>>>>>>> believe
> this
> > >>>>>>>>>> is fairly
> > >>>>>>>>>> normal on
> a
> > >>>>>>>>>> new
> startup.
> > >>>>>>>>>> It has to
> > start
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > somewhere. The
> > >>>>>>>>>> expired
> > ticket
> > >>>>>>>>>> errors
> below
> > >>>>>>>>>> are
> > unexpected
> > >>>>>>>>>> since
> there
> > >>>>>>>>>> > are
> so
> > >>>>>>>>>> many of
> them.
> > >>>>>>>>>> Is your
> KDC
> > >>>>>>>>>> running?
> > >>>>>>>>>> >
> > >>>>>>>>>> >
> ipactl
> > >>>>>>>>>> status
> > >>>>>>>>>> >
> > >>>>>>>>>> > rob
> > >>>>>>>>>> >
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> 2014-07-02
> > >>>>>>>>>> 14:15
> > >>>>>>>>>> GMT+08:00
> > >>>>>>>>>>
> > <barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>>>>:
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> this is
> the
> > >>>>>>>>>> error log
> i
> > >>>>>>>>>> found at
> > >>>>>>>>>> 2.abc.com
> > <http://2.abc.com>
> > >>>>>>>>>>
> > <http://2.abc.com>
> > >>>>>>>>>>
> > <http://2.abc.com>
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > <http://2.abc.com>
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:31
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapd_ldap_sasl_interactive_bind
> > >>>>>>>>>> -
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> could
> > >>>>>>>>>> not
> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> > >
> > >>>>>>>>>> LDAP
> error -2
> > >>>>>>>>>> (Local
> error)
> > >>>>>>>>>> (SASL(-1):
> > >>>>>>>>>> generic
> > >>>>>>>>>> failure:
> > GSSAPI
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> > >>>>>>>>>>
> Unspecified
> > >>>>>>>>>> GSS
> failure.
> > >>>>>>>>>> Minor
> code
> > >>>>>>>>>> may
> > provide more
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> information
> > >>>>>>>>>> (Ticket
> > >>>>>>>>>> expired))
> > >>>>>>>>>> errno 0
> > (Success)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:31
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapd_ldap_sasl_interactive_bind
> > >>>>>>>>>> -
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> could
> > >>>>>>>>>> not
> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> > >
> > >>>>>>>>>> LDAP
> error -2
> > >>>>>>>>>> (Local
> error)
> > >>>>>>>>>> (SASL(-1):
> > >>>>>>>>>> generic
> > >>>>>>>>>> failure:
> > GSSAPI
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> > >>>>>>>>>>
> Unspecified
> > >>>>>>>>>> GSS
> failure.
> > >>>>>>>>>> Minor
> code
> > >>>>>>>>>> may
> > provide more
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> information
> > >>>>>>>>>> (Ticket
> > >>>>>>>>>> expired))
> > >>>>>>>>>> errno 0
> > (Success)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:31
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapi_ldap_bind -
> > >>>>>>>>>> Error:
> > could not
> > >>>>>>>>>> > >
> > >>>>>>>>>> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> error -2
> > >>>>>>>>>> >
> (Local
> > >>>>>>>>>> error)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:31
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > NSMMReplicationPlugin
> > >>>>>>>>>> -
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > agmt="cn=meTo1.abc.com <http://meTo1.abc.com>
> > >>>>>>>>>>
> > <http://meTo1.abc.com>
> > >>>>>>>>>>
> > <http://meTo1.abc.com>
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > <http://meTo1.abc.com>"
> > >>>>>>>>>>
> > (central:389):
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> Replication
> > >>>>>>>>>> bind with
> > >>>>>>>>>> GSSAPI
> auth
> > >>>>>>>>>> failed:
> LDAP
> > >>>>>>>>>> error -2
> > (Local
> > >>>>>>>>>> > >
> > >>>>>>>>>> error)
> > >>>>>>>>>> (SASL(-1):
> > >>>>>>>>>> generic
> > >>>>>>>>>> failure:
> > >>>>>>>>>> GSSAPI
> Error:
> > >>>>>>>>>>
> > Unspecified GSS
> > >>>>>>>>>> > >
> > >>>>>>>>>> failure.
> > >>>>>>>>>> Minor
> code
> > >>>>>>>>>> may
> provide
> > >>>>>>>>>> more
> > >>>>>>>>>>
> information
> > >>>>>>>>>> (Ticket
> > >>>>>>>>>> >
> > expired))
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:34
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapd_ldap_sasl_interactive_bind
> > >>>>>>>>>> -
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> could
> > >>>>>>>>>> not
> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> > >
> > >>>>>>>>>> LDAP
> error -2
> > >>>>>>>>>> (Local
> error)
> > >>>>>>>>>> (SASL(-1):
> > >>>>>>>>>> generic
> > >>>>>>>>>> failure:
> > GSSAPI
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> > >>>>>>>>>>
> Unspecified
> > >>>>>>>>>> GSS
> failure.
> > >>>>>>>>>> Minor
> code
> > >>>>>>>>>> may
> > provide more
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> information
> > >>>>>>>>>> (Ticket
> > >>>>>>>>>> expired))
> > >>>>>>>>>> errno 0
> > (Success)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:35
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapd_ldap_sasl_interactive_bind
> > >>>>>>>>>> -
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> could
> > >>>>>>>>>> not
> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> > >
> > >>>>>>>>>> LDAP
> error -2
> > >>>>>>>>>> (Local
> error)
> > >>>>>>>>>> (SASL(-1):
> > >>>>>>>>>> generic
> > >>>>>>>>>> failure:
> > GSSAPI
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> > >>>>>>>>>>
> Unspecified
> > >>>>>>>>>> GSS
> failure.
> > >>>>>>>>>> Minor
> code
> > >>>>>>>>>> may
> > provide more
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> information
> > >>>>>>>>>> (Ticket
> > >>>>>>>>>> expired))
> > >>>>>>>>>> errno 0
> > (Success)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:35
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapi_ldap_bind -
> > >>>>>>>>>> Error:
> > could not
> > >>>>>>>>>> > >
> > >>>>>>>>>> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> error -2
> > >>>>>>>>>> >
> (Local
> > >>>>>>>>>> error)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:40
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapd_ldap_sasl_interactive_bind
> > >>>>>>>>>> -
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> could
> > >>>>>>>>>> not
> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> > >
> > >>>>>>>>>> LDAP
> error -2
> > >>>>>>>>>> (Local
> error)
> > >>>>>>>>>> (SASL(-1):
> > >>>>>>>>>> generic
> > >>>>>>>>>> failure:
> > GSSAPI
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> > >>>>>>>>>>
> Unspecified
> > >>>>>>>>>> GSS
> failure.
> > >>>>>>>>>> Minor
> code
> > >>>>>>>>>> may
> > provide more
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> information
> > >>>>>>>>>> (Ticket
> > >>>>>>>>>> expired))
> > >>>>>>>>>> errno 0
> > (Success)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:40
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapd_ldap_sasl_interactive_bind
> > >>>>>>>>>> -
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> could
> > >>>>>>>>>> not
> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> > >
> > >>>>>>>>>> LDAP
> error -2
> > >>>>>>>>>> (Local
> error)
> > >>>>>>>>>> (SASL(-1):
> > >>>>>>>>>> generic
> > >>>>>>>>>> failure:
> > GSSAPI
> > >>>>>>>>>> > >
> > >>>>>>>>>> Error:
> > >>>>>>>>>>
> Unspecified
> > >>>>>>>>>> GSS
> failure.
> > >>>>>>>>>> Minor
> code
> > >>>>>>>>>> may
> > provide more
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> information
> > >>>>>>>>>> (Ticket
> > >>>>>>>>>> expired))
> > >>>>>>>>>> errno 0
> > (Success)
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > [30/Jun/2014:12:51:40
> > >>>>>>>>>> +0800]
> > >>>>>>>>>>
> > slapi_ldap_bind -
> > >>>>>>>>>> Error:
> > could not
> > >>>>>>>>>> > >
> > >>>>>>>>>> perform
> > >>>>>>>>>>
> interactive
> > >>>>>>>>>> bind for
> > id []
> > >>>>>>>>>> mech
> > [GSSAPI]:
> > >>>>>>>>>> error -2
> > >>>>>>>>>> >
> (Local
> > >>>>>>>>>> error)
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> 2014-07-02
> > >>>>>>>>>> 12:32
> > >>>>>>>>>> GMT+08:00
> > >>>>>>>>>>
> > <barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>>
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>
> > >>>>>>>>>>
> > <mailto:barrykfl at gmail.com <mailto:barrykfl at gmail.com>>>>>:
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> yes on
> node
> > >>>>>>>>>> 1 it is
> > >>>>>>>>>> happening
> > only
> > >>>>>>>>>> node2
> > fail connect
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > >>>>>>>>>>
> > ipa-replica-manage
> > >>>>>>>>>> list
> > 2.abc.com <http://2.abc.com>
> > >>>>>>>>>>
> > <http://2.abc.com>
> > >>>>>>>>>>
> > <http://2.abc.com>
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > <http://2.abc.com>
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> Directory
> > >>>>>>>>>> Manager
> > password:
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > 1.abc.com <http://1.abc.com>
> > >>>>>>>>>>
> > <http://1.abc.com>
> > >>>>>>>>>>
> > <http://1.abc.com>
> > >>>>>>>>>>
> > <http://1.abc.com>:
> > >>>>>>>>>> replica
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> 2014-06-30
> > >>>>>>>>>> 20:59
> > >>>>>>>>>> GMT+08:00
> Rob
> > >>>>>>>>>> Crittenden
> > >>>>>>>>>> >
> > >>>>>>>>>>
> > <rcritten at redhat.com <mailto:rcritten at redhat.com>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>>>
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>
> > >>>>>>>>>>
> > <mailto:rcritten at redhat.com <mailto:rcritten at redhat.com>>>>>:
> > >>>>>>>>>> > >
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > Barry wrote:
> > >>>>>>>>>> > >
> > >>>>>>>>>> >
> Hi:
> > >>>>>>>>>> > >
> > >>>>>>>>>>
> > >>>>> ...
> > >>>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>
> > >>>
> > >>
> > >>
> > >
> > >
> > >
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/freeipa-users/attachments/20140716/18296a1a/attachment.htm>
More information about the Freeipa-users
mailing list