[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] How do I get access to the local parallel port?



http://www.ltsp.org/documentation/ltsp-3.0.0/ltsp-3.0.html#AEN456

 LTSP uses the lp_server program on the workstation, to redirect print
jobs from the server to the printer attached to one of the ports on the
workstation.

To enable the printer on the workstation, there are a set of
configuration entries in the lts.conf file.

[ws001]
    PRINTER_0_DEVICE = /dev/lp0
    PRINTER_0_TYPE   = P 

The above entry will cause the lp_server program to run as a daemon,
listening on TCP/IP port 9100 for a print stream from the server. The
print data will then be redirected to the printer attached to the
/dev/lp0 parallel port.

;-) Paul

On Sun, 2002-07-07 at 19:17, Bert Rolston wrote:
> Hi all,
> 
> I've got one user who has a local printer.
> 
> How do I get the local parallel port to work in a LTSP session?
> 
> Is there a module I can load via the lts.conf file? The lts.conf file has 
> an example for sound modules, and serial printers, but not a parallel 
> printer.
> 
> Cheers,
> Bert
> 
> 
> 
> 
> 
> _______________________________________________
> K12OSN mailing list
> K12OSN redhat com
> https://listman.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
-- 
==========================================================
Paul Nelson................... pnelson riverdale k12 or us
Riverdale School, 11733 SW Breyman Ave, Portland, OR 97219
school (503)636-4511.....................fax (503)635-6342
Riverdale Web Page......... http://www.riverdale.k12.or.us





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]