[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] LTSP Install Problems-HELP!



Ken Johnson wrote:
> 
> I changed it, but I still got the same result.
> 
> My lts.conf file was not located at : /tftpboot/lts/ltsroot/etc/lts.conf
> 
> but instead was at /opt/ltsp/i386/etc/lts.conf
> 
> Am I in the right place?
> 
> "Help me Obi Wan..."

Yes, but I would have thought the line should be...

         X_RES_0 = 800x600

(instead of X_RES_1 = 800x600)

You might even try...

        X_COLOR_DEPTH  = 8

to force it to 256 colors in case higher color depth gives a problem
(which doesn't sound like the case here).

Give that a try.


> 
> -----Original Message-----
> From: k12osn-admin redhat com [mailto:k12osn-admin redhat com]On Behalf
> Of Paul Nelson
> Sent: Saturday, July 13, 2002 3:05 AM
> To: k12osn redhat com
> Subject: Re: [K12OSN] LTSP Install Problems-HELP!
> 
> This sounds like a monitor sync problem. You can test that quickly by
> changing the default settings down to 800x600 from teh 1024x768. You
> just have to add one line to the /tftpboot/lts/ltsroot/etc/lts.conf
> file. See below...
> 
> ;-) Paul
> 
> >From the K12OSN archives,
> =======================================================
> >One more thing(there is always another) The default
> >resolution appears to be 1024 X 760 at the
> >workstation. How do you make the default resolution
> >800 X 600? We have a lot of 15 in monitors, and
> >students seem to like the text/buttons larger than
> >1024.
> 
> This is set in /tftpboot/lts/ltsroot/etc/lts.conf
> 
> Take a look at the examples for how to configure a number
> of items. Resolution settings are in the first example.
> 
> If you want all of your terminals in 800x600 mode, add this
> to the [Default] section
> 
>         X_RES_1 = 800x600
> 
> -Eric
> ================================================================
> 
> On Fri, 2002-07-12 at 21:10, Ken Johnson wrote:
> > I am a new VERY frustrated Linux user. I have tried to install LTSP 2.1.0.
> > several times.
> >
> > I am testing LTSP with just 2 computers, one as the server, and one as a
> > workstation.
> >
> > The server is a 466MHz Celeron, the workstation is an HP Pavillion 6350
> > (333MHz AMD K6-2)
> >
> > I'm booting the workstation from the floppy.
> >
> > The workstation has a Sis 5598, and the server has a ATI Rage IIc AGP,
> both
> > of which are supported by RedHat 7.3.
> >
> > The workstation makes contact with the server, several messages scroll by,
> > then it says
> >
> > Building XF86Config-4
> > Start syslogd
> >
> > The screen goes black after a few seconds and the monitor powers down!
> >
> > If I turn the monitor power button off, and then turn it back on - for
> just
> > a second I see the Login screen- then the monitor powers down again.
> >
> > Needless to say I'm tearing my hair out.
> >
> > I also have LTSP loaded on the hard drive of the workstation, so I can
> test
> > it the other way
> > (the workstation boots as the server and the server machine boots off of
> the
> > floppy and acts as the workstation) SAME RESULT!
> >
> > What am I doing wrong? How can I troubleshoot this? I've read the
> > K12LTSP.Org Web pages, but there is so much I don't know about Linux
> (yet!)
> >
> > HELP!!
> >
> > Ken J
> >

-- 
Mike Rambo
mrambo lsd k12 mi us





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]