[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] LTSP channel bonding how-to

Bert Rolston wrote:
> Hi Caleb,
> I threw out the e-mail. I'll have to search for it again.
> Let you know when I've found it.
> Cheers,
> Bert

I, on the other hand, haven't cleaned out my INBOX in many moons. :-) Here's your original e-mail, Caleb.

-Dan Young
-Parkrose School District

Caleb wrote:
If you have a large number of terminals running on one server, you may
run into a network bottleneck at your server. It would be nice to
replace that 10/100 setup with gigabit and get more bandwidth, but some
of us can't afford that solution (after all, part of the beauty of this
open source solution is that it's free). You can add another 10/100 nic
to your server and get more bandwidth that way via channel bonding. It's

Step 1: Install the extra nic. This can be done with a current ltsp setup or
before a fresh install. Don't worry about assigning any address to it
because we will change that later.

Step 2: Modify /etc/modules.conf by adding the line:

alias bond0 bonding

Step 3: Add a new file ifcfg-bond0 in /etc/sysconfig/network-scripts/. The
contents of this file should be the following:

DEVICE=bond0 USERCTL=no ONBOOT=yes BOOTPROTO=none BROADCAST=xxx.xxx.xxx.xxx NETWORK=xxx.xxx.xxx.xxx NETMASK=xxx.xxx.xxx.xxx IPADDR=xxx.xxx.xxx.xxx

You should fill in the x's with the same network information as the ethx
that this new bonded interface will be taking the place of.

Step 4: The configuration files for both your intranet nics (example: ifcfg-eth0
in /etc/sysconfig/network-scripts/) should be modified as follows:


Again, where "x" in ethx is the number of your interface.

Step 5: Open the dhcpd script (located in /etc/init.d/) in a text editor and
modify the line that says:

daemon /usr/sbin/dhcpd eth0

so that it says:

daemon /usr/sbin/dhcpd bond0

Step 6:
A network and dhcp restart may not work so reboot the server.

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]