[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] 2.0.2 install and open Mosix

If the LTSP+OpenMosix (Rev. 3.3) instructions are followed exactly as
outlined on an "out-of-the-box" install of K12LTSP then openMosix clustering
will work fine.

HOWEVER, if you change the server or dhcp addresses then you are looking at
tracking down changes in a lot of different places.

For instance, if you change the default K12LTSP addressing scope from
192.168.0.x to 192.168.1.x then you would need to indicate the changes in
ALL of the following files:

/etc/hosts (/opt/ltsp/i386/etc/hosts)
/etc/mosix.map (/opt/ltsp/i386/etc/mosix.map)

Also you may need to check your firewalling if you have made changes from
the default K12LTSP install.  I hope this helps.


----- Original Message -----
From: "Salah Baker" <salatar mail salatar com>
To: <k12osn redhat com>
Sent: Saturday, May 18, 2002 3:05 PM
Subject: [K12OSN] 2.0.2 install and open Mosix

> Hello,
> I have some general Questions about the K-12os that I hope may get
> answer here.
> I have a small lab set up for my school and am generally a \"New\" Linux
> user. (Bear with me)
> I have installed K-12OS and open-mosix on the head as per instructions
> on K-12-os and sourceforge. All seems fine on the head till I boot up a
> diskless node. In Mosmon the only node that shows is the head.
> The boot process seems fine on diskless as they login to kde just fine
> short one issue, they don't seem to have a name(dhcp?) .When they boot I
> see that they give a error about mount(mfs) and mosix not being set up.
> Is there something I'm missing? Or is there a bug in install
> instructions?
> thank you
> _______________________________________________
> K12OSN mailing list
> K12OSN redhat com
> https://listman.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]