[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] IDE software raid



I knew I was going to be on the edge with the ram. I will have 15 or so who
will bring laptops.

I had read on the list that IDE disk performance didn't really get the job
done with more than 10 clients, and I figured if raid 0 would help, it would
be easy enough.


----- Original Message -----
From: "Richard Camp" <rcamp campworld net>
To: <k12osn redhat com>
Sent: Sunday, November 10, 2002 6:13 PM
Subject: Re: [K12OSN] IDE software raid


> Tom,
>
> I run software raid 0 with LTSP.  I have done this both with SCSI and
> IDE.  It will help.  Definitely put only one hard drive on each ide
> cable.  How many clients are you  going to support?  General rule if
> 50Meg per client.
>
> Richard
>
> Thomas E. Haynes wrote:
>
> >Greetings...
> >
> >I am curious.
> >
> >Has anyone tried a software Raid 0 with a LTSP install?
> >
> >Can LTSP handle more users w/o SCSI drives configured this way?
> >
> >I am thinking about doing a demo for the computer club at school. I have
a
> >dual 500 w/ 768 MB of ram. I have two pretty zippy IDE drives and figure
I
> >could set them up as Raid 0 on different controllers if that would help.
I
> >fear the ram may really be my limitation, and I have maxed out the board
> >here.
> >
> >Regards...  Tom
> >
> >
> >
> >_______________________________________________
> >K12OSN mailing list
> >K12OSN redhat com
> >https://listman.redhat.com/mailman/listinfo/k12osn
> >For more info see <http://www.k12os.org>
> >
>
>
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN redhat com
> https://listman.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]