[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] Printing via clients?



In /opt/ltps/i386/etc/lts.conf add/modify some of the following.  

        PRINTER_0_DEVICE   = /dev/lp0
        PRINTER_0_TYPE     = P          # P-Parallel, S-Serial
        PRINTER_0_PORT     = 9100       # tcp/ip port: defaults to 9100
        PRINTER_0_SPEED    = 9600       # baud rate: defaults to 9600
        PRINTER_0_FLOWCTRL = S     # Flow control: S-Software(XON/XOFF),
                                   # H-Hardware (CTS/RTS)
        PRINTER_0_PARITY   = N     # Parity: N-None, E-Even, O-Odd
                                   # (defaults to 'N')
        PRINTER_0_DATABITS = 8     # Databits: 5,6,7,8 (defaults to 8)

I use this to print to a Brother 1440 connected to the client.

Sincerely,
Dave Hopkins


On Wed, 2003-06-11 at 03:25, John Ingleby wrote:
> Has anyone successfully attached a printer to their clients' LPT port?
> 
> Presumably it requires sone local apps, but which? Any refs? 
> 
> Thanks,
> 
> John Ingleby
> ************
> 
> 
> 
> _______________________________________________
> K12OSN mailing list
> K12OSN redhat com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
-- 
David Hopkins <dahopkins comcast net>




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]