[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] Printing via clients?



David,
	remove speed, flowcontrol, parity, and databits - they are
miningless for parallel port, and a good thing too: the software flow
control would really mess it up. you might dump the printer0 port -
9100 is the default. and one more thing: *no* local apps required. julius

On Thu, 12 Jun 2003, David Hopkins wrote:
> In /opt/ltps/i386/etc/lts.conf add/modify some of the following.
>         PRINTER_0_DEVICE   = /dev/lp0
>         PRINTER_0_TYPE     = P          # P-Parallel, S-Serial
>         PRINTER_0_PORT     = 9100       # tcp/ip port: defaults to 9100
>         PRINTER_0_SPEED    = 9600       # baud rate: defaults to 9600
>         PRINTER_0_FLOWCTRL = S     # Flow control: S-Software(XON/XOFF),
>                                    # H-Hardware (CTS/RTS)
>         PRINTER_0_PARITY   = N     # Parity: N-None, E-Even, O-Odd
>                                    # (defaults to 'N')
>         PRINTER_0_DATABITS = 8     # Databits: 5,6,7,8 (defaults to 8)
>
> I use this to print to a Brother 1440 connected to the client.
>
> On Wed, 2003-06-11 at 03:25, John Ingleby wrote:
> > Has anyone successfully attached a printer to their clients' LPT port?
> >
> > Presumably it requires sone local apps, but which? Any refs?




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]