[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] Printing via clients?



Julius,

Thanks, I'll try removing flow control.  I couldn't print until I put it
in earlier, but entirely possible that something else I changed caused
that problem.  I know the others are default, but I tend to explicitly
set them so anyone else looking at the setup knows what I have done.

Dave Hopkins


On Thu, 2003-06-12 at 21:30, Julius Szelagiewicz wrote:
> David,
> 	remove speed, flowcontrol, parity, and databits - they are
> miningless for parallel port, and a good thing too: the software flow
> control would really mess it up. you might dump the printer0 port -
> 9100 is the default. and one more thing: *no* local apps required. julius
> 
> On Thu, 12 Jun 2003, David Hopkins wrote:
> > In /opt/ltps/i386/etc/lts.conf add/modify some of the following.
> >         PRINTER_0_DEVICE   = /dev/lp0
> >         PRINTER_0_TYPE     = P          # P-Parallel, S-Serial
> >         PRINTER_0_PORT     = 9100       # tcp/ip port: defaults to 9100
> >         PRINTER_0_SPEED    = 9600       # baud rate: defaults to 9600
> >         PRINTER_0_FLOWCTRL = S     # Flow control: S-Software(XON/XOFF),
> >                                    # H-Hardware (CTS/RTS)
> >         PRINTER_0_PARITY   = N     # Parity: N-None, E-Even, O-Odd
> >                                    # (defaults to 'N')
> >         PRINTER_0_DATABITS = 8     # Databits: 5,6,7,8 (defaults to 8)
> >
> > I use this to print to a Brother 1440 connected to the client.
> >
> > On Wed, 2003-06-11 at 03:25, John Ingleby wrote:
> > > Has anyone successfully attached a printer to their clients' LPT port?
> > >
> > > Presumably it requires sone local apps, but which? Any refs?
> 
> 
> _______________________________________________
> K12OSN mailing list
> K12OSN redhat com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
-- 
David Hopkins <dahopkins comcast net>




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]