[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] smart card reader



The Via Eden is not really a 586/686 clone, it is more of a 386 one.  If you
go to the Via Arena at http://www.viaarena.com/, I think it has a few
articles about using the Epia with Linux and the fact that building for the
386 is better and less error prone.  The big problem is that 386 support is
fading away,  in fact for the testing and unstable version of Debian,
producing 386 code from gcc is broken.

If you are using Debian, I would try to use a version of glibc that is
earlier than 3.0 and recompile the linux driver.  Be warned that the name
mangling has been changed in gcc after 3.0 and if you use an old version for
a driver you may have to also use an old Linux kernel.

If you are using a RedHat kernel, try to go for 7.2 or 8.0, not the new
version 9.

Darryl


----- Original Message ----- 
From: "vcare" <vcarecrc vsnl com>
To: <k12osn redhat com>
Sent: Monday, June 30, 2003 6:00 AM
Subject: [K12OSN] smart card reader


> Hello,
>  I would like to integrate Gemplus smartcard with its linux Drivers on
> the Thin-client , it is halts after the
> kernel freeing unused  Memory  Message.
> I can ping that machine so it it actually active on the network.
> As per the troubleshooting guide --it is glibc problem.
> It works perfectly on I810 motherboard  what could be the difference ,
> it is not working on Via MiniITX board.
>
> Very Very Urgent
>
> regards
> Dinesh
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN redhat com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]