[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] Help with my sound



My lts.conf file is below:

+++++++++++++++++++++++++


#
# Config file for the Linux Terminal Server Project (www.ltsp.org)
#
# See lts.conf.readme for a description of each configuration item
#
[Default]
        # IP address of the LTSP server
        SERVER             = 192.168.0.254

        # Video drivers for the terminals
        XSERVER            = auto
            # XFree 4 drivers: ati cirrus cyrix fbdev i128 i740 i810 mga
            #      neomagic nv r128 radeon rendition s3 s3virge savage
            #      siliconmotion sis tdfx tga trident tseng vesa vga
            # XFree 3 drivers: XF86_FBDev XF86_S3 XF86_S3V XF86_SVGA
            #      XF86_VGA16 XFree86 Xvesa

        # Mice drivers for the terminals
        X_MOUSE_PROTOCOL   = "PS/2"
            # Mouse protocols: ExplorerPS/2 GlidePoint GlidePointPS/2
            #      IMPS/2 IntelliMouse Microsoft MouseManPlusPS/2
            #      NetMousePS/2 NetScrollPS/2 PS/2 ThinkingMouse
            #      ThinkingMousePS/2 usb
        X_MOUSE_DEVICE     = "/dev/psaux"
        # X_MOUSE_RESOLUTION = 400
        X_MOUSE_BUTTONS    = 3
        X_USBMOUSE_PROTOCOL= "IMPS/2"
        X_USBMOUSE_DEVICE  = "/dev/input/mice"
        X_USBMOUSE_BUTTONS = 5

        # X_USBMOUSE_RESOLUTION = 400

        # Keyboards
        XkbSymboles        = "us(pc101)"
        XkbModel           = "pc101"
        XkbLayout          = "us"
            # Example of setting a different (German) keyboard mapping,
            #    XkbLayout = "de"
            # also see:
            #   http://www.xfree86.org/current/XKB-Config2.html
            #  
http://www.ltsp.org/documentation/ltsp-3.0-4-en.html#AEN1213
            #   /opt/ltsp/i386/usr/X11R6/lib/X11/xkb/rules/xfree86.lst
            #   (/opt/ltsp/i386/usr/X11R6/lib/X11/xkb/symbols/)
            #   (/opt/ltsp/i386/usr/X11R6/lib/X11/xkb/keymap/xfree86)

        USE_XFS            = N
        LOCAL_APPS         = N
        RUNLEVEL           = 5
      
        # uncomment the following line to enable floppy support
        RCFILE_01          = floppyd

        # uncomment the following line to enable USB support
        RCFILE_02          = usb

        # enable sound by default
        SOUND              = Y
        SOUND_DAEMON = nasd
        # default sound volume
        VOLUME             = 95

        ### For ISA sound cards, you have to specify the module to use:
        SMODULE_01       = sb io=0x220 irq=5 dma=1
            
#------------------------------------------------------------------------------
# Below are sample mode lines for a variety of vertical refresh rates and
# resolutions.  They are used to define the default client screen
resolution.
# Some lines may not work with a given monitor and video chipset.
# To avoid damaging a monitor and video card, only specify mode lines that
# your client's hardware can support.
# Uncomment only *one* of the following X_MODE_0 lines at a time, or add
one
# of your own.
<snip> nothing but a couple of workstation specific settings below
here...nothing odd or to do with sound.....

David N. Trask
Technology Teacher/Coordinator
Vassalboro Community School
dtrask vcs u52 k12 me us
(207)923-3100




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]