[K12OSN] ifconfig question

[Jim Kronebusch]

This seems like it should be stupidly simple and I hate to even ask,
but, I am configuring a Intel Pro1000MT Dual Port Server Adapter in WBEL
and am trying to enable ALB.  I put the card in, loaded the drivers from
the Intel CD, loaded iANS from the CD, configured the team with the
ianstool and when I do ifconfig I see my eth0, eth1, and my new virtual
adaptor of team1 anlong with lo.  My problem is configuring the IP,
netmask, gateway, etc for the new virtual adaptor.  I usually configure
the interfaces from the Network utility that comes with the distro
because unfortunately I am still gui dependant (trying to quit).  The
new virtual adaptor team1 does not show up here.  I can issue 
# ifconfig team1 10.6.1.15 netmask 255.255.0.0 broadcast 10.6.255.255
and do a 
# ifconfig 
and see my can the settings successfully.  I am able to ping the local
address 10.6.1.15 and out to my router interface of 10.6.0.1, but am
unable to get to the outside world becuase I recieve a "Destination
unreachable" or something.  I am sure this is because I don't know how
to assign a gateway at the command line.  
 
The next problem is the settings do not "stick", if I restart the
network or the machine and do a 
# ifconfig
the settings dissappear and I have to start all over.  So how do I save
the info once it is set?  Or can I just edit some /etc/something file
manually to make it stick?
 
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/k12osn/attachments/20040415/9dd81fa1/attachment.htm>