[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [K12OSN] Server Clone



[SNIP]
> Your problem is that you are using RAID on your master server 
> and trying to copy to plain disk partitions.  

I am using the PERC Raid Controller with Hardware RAID not Software
RAID.  The drive I want cloned is / made from a hardware mirrored raid
of 9GB SCSI's.  Both machines are already setup with the RAID in the
controller bios.  When I boot to load linux all I see is a single 9GB
drive on both machines known as /dev/sda and partitions into sda1 for
/boot sda2 for / and sda3 for swap.  Since this is at the hardware level
on both machines are your suggestions still relavant?  I don't really
even care about my /home directory on sdb for now, but those are also
hardware RAID5 seen as a single 205GB drive on one machine partitioned
into sdb1 /home, and a single 54GB drive on the other machine with the
same partitions scheme.  Everything is ext3.



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]