[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] USB Printer on ThinkNIC



On Fri, 2004-06-04 at 04:14, Daniel Loomis wrote:
> I am having trouble setting up an Epson inkjet printer on a ThinkNIC
> client.  I am running K12LTSP 3.1.  The workstation config in lts.conf
> is as follows:
> 
> ws006]
>         XSERVER             = Xvesa
>         LOCAL_APPS          = N
>         USE_NFS_SWAP        = N
>         SWAPFILE_SIZE       = 48m
>         RUNLEVEL            = 5
>         SMODULE_01          = cmpci
>         MODULE_01           = usb-ohci
>         MODULE_02           = printer
>         PRINTER_0_DEVICE    = /dev/usb/lp0
>         PRINTER_0_TYPE      = S
> 
> I used the printer setup gui to create the que as a jetprint port using
> port 9100.  The printer is an Epson Stylus C40UX usb printer.
> 
> When I try to do a CUPS test print all I get is error message that the
> client is busy, retrying in 5 seconds; however, it doesn't.
Is the workstation IP and name "ws006" set in dhcpd.conf? Try working
this workstation with MAC address in lts.conf section instead of ws006.
-- 
Sudev Barar
Learning Linux



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]