[K12OSN] Re: [Ltsp-discuss] Still hanging at mounting filesystem

[Sudev Barar]

On Wed, 2004-05-12 at 17:06, Dana Persells wrote:
> Thanks, Sudev...
Does it mean you are home free and thing is finally working???

> I tried removing the quotes, then the client will not
> get as far and the card is not properly recognized.
SO you are then working with PCI8029 card and not generally available
8039 ISA cards. In that case the quotes will have to there to comment
out option lines. This is also what Dan Bo has mentioned in his post to
this thread. Personally I have only come across ISA 8039 cards (or am I
confusing with 8029??? --- need to rip open a few boxes and confirm ;-0
)
The lines need to working only for ISA cards.

> It's interesting that these were placed upon
> installation automatically with the quotes. I didn't
> do it. RH9 identifies the card as a NE2000 clone which
Yes LTSP makes a example configuration for dhcpd and places two three
"example" workstation sections to be used for creating newer sections
for workstations.
Personally therefore I never use ws001 but start my workstations from
number ws011. Editing dhcpd.conf later on I do not have to hunt for
lines to copy paste.

> is partially correct on the version of the card that
> is in the server. However, the driver is different
> from etherboot (rom-o-matic) and a ne2000 clone driver
> will not boot card. Weird!
You learn and you learn.....

-- 
Sudev Barar
Learning Linux