[K12OSN] Accton en1207/c-tx nics

Olle Niit olle at paalalinn.com
Fri Oct 1 12:02:42 UTC 2004


no no no. 1208 was 10Mbit ne2k-pci compatible
1207 is 10/100 Mbit card and sounds more like rtl8139

(1). Full-Duplex enabled and Boot ROM enabled:
         (Flow control item are displayed only when Full-Duplex enabled)

    ================================================================
    | Ethernet Address: ............. 00 00 E8 12 11 01            |
    | Network Speed: ................ 100/10 Mbps                  |
    | Full-Duplex: .................. Enabled                      |
    | I/O Base: ..................... E000 H                       |
    | Interrupt: .................... 10                           |
    | Boot ROM Size: ................ 16  Kilo-Bytes               |
    | Bus Number: ................... 0                            |
    | Device/Slot Number: ........... 10                           |
    | Flow control: ................. Tx Enable,  Rx Enable        |
    | Medium Type: .................. Auto Detect                  |
    |                                                              |
    | This is your PCI LAN board current configuration.If you will |
    | change the configuration, go back to the Main Menu and choose|
    | SET UP NEW CONFIGURATION.                                    |
    ================================================================


On R, 2004-10-01 at 12:39, goblin at scooter.co.nz wrote:

> Havn't used them for thin client but...
> We used to run these in win9x machines and they we netware 2000 
> compatible... was some time ago but if I recall they would run with the 
> ne2k-pci driver.
> 
> mRgOBLIN





More information about the K12OSN mailing list