[K12OSN] Cant get server to find floppy drive
Charles Hale
support at 499pc.net
Mon Oct 11 20:34:17 UTC 2004
Wilson:
Your ls command indicates that your only mount point
under mnt is cdrom. You first need to create a mount
point named 'floppy' as indicated in your fstab file
by /mnt/floppy.
Next retry the mount command:
...]mount /dev/fd0 /mnt/floppy
--- Wilson <wilson at wilsonch.gotdns.com> wrote:
> The thin client server is up and running, but for
> some reason I can't seem
> to mount the floppy drive. I tried manually adding
> /dev/fd0 in fstab because
> it wasn't there. I even tried swapping out floppy
> drives but nothing works.
> Any ideas? Below are some outputs (fstab, mtab,
> dmesg, chkconfig):
>
> ***Tried Mounting Floppy***
> [root at server root]# mount floppy
> mount: can't find floppy in /etc/fstab or /etc/mtab
>
> ***No Floppy in mnt***
> [root at server mnt]# ls
> cdrom
> [root at server mnt]#
>
> ***/etc/fstab***
> [root at server root]# cat /etc/fstab
> LABEL=/ / ext3
> defaults 1 1
> none /dev/pts
> devpts gid=5,mode=620 0 0
> none /dev/shm
> tmpfs defaults 0 0
> LABEL=/home /home ext3
> defaults 1 2
> none /proc proc
> defaults 0 0
> none /sys
> sysfs defaults 0 0
> /dev/sdc2 swap swap
> defaults 0 0
> /dev/cdrom /mnt/cdrom
> udf,iso9660
> noauto,owner,kudzu,ro 0 0
> /dev/fd0 /mnt/floppy auto
> noauto,owner,kudzu 0
> 0
>
> ***/etc/mtab***
> [root at server mnt]# cat /etc/mtab
> /dev/sdc1 / ext3 rw 0 0
> none /proc proc rw 0 0
> none /sys sysfs rw 0 0
> none /dev/pts devpts rw,gid=5,mode=620 0 0
> usbdevfs /proc/bus/usb usbdevfs rw 0 0
> none /dev/shm tmpfs rw 0 0
> /dev/sda1 /home ext3 rw 0 0
> sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
> nfsd /proc/fs/nfsd nfsd rw 0 0
>
>
> ***dmesg output***
> [root at server mnt]# dmesg |less
> Linux version 2.6.8-1.521smp
> (bhcompile at tweety.build.redhat.com) (gcc
> version 3.
> 3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Mon Aug
> 16 09:25:06 EDT 2004
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00
> (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000
> (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000
> (reserved)
> BIOS-e820: 0000000000100000 - 0000000040000000
> (usable)
> BIOS-e820: 00000000fec00000 - 00000000fec01000
> (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000
> (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000
> (reserved)
> 0MB HIGHMEM available.
> 1024MB LOWMEM available.
> ACPI: S3 and PAE do not like each other for now, S3
> disabled.
> found SMP MP-table at 000fb4f0
> On node 0 totalpages: 262144
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 258048 pages, LIFO batch:16
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.1 present.
> ACPI disabled because your bios is from 99 and too
> old
> You can enable it with acpi=force
> Using APIC driver default
> Intel MultiProcessor Specification v1.4
> Virtual Wire compatibility mode.
> OEM ID: INTEL Product ID: 440BX APIC at:
> 0xFEE00000
> Processor #0 6:10 APIC version 17
> Processor #1 6:10 APIC version 17
> I/O APIC #2 Version 17 at 0xFEC00000.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Processors: 2
> Built 1 zonelists
> Kernel command line: ro root=LABEL=/ rhgb quiet
> mapped 4G/4G trampoline to fffeb000.
> Initializing CPU#0
> CPU 0 irqstacks, hard=023eb000 soft=023cb000
> PID hash table entries: 4096 (order 12: 32768 bytes)
> Detected 701.704 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7,
> 524288 bytes)
> Inode-cache hash table entries: 131072 (order: 7,
> 524288 bytes)
> Memory: 1033604k/1048576k available (1896k kernel
> code, 14236k reserved,
> 736k da
> ta, 176k init, 0k highmem)
> Calibrating delay loop... 1384.44 BogoMIPS
> Security Scaffold v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> There is already a security framework initialized,
> register_security failed.
> selinux_register_security: Registering secondary
> module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512 (order: 0, 4096
> bytes)
> CPU: After generic identify, caps: 0383fbff 00000000
> 00000000 00000000
> CPU: After vendor identify, caps: 0383fbff 00000000
> 00000000 00000000
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 2048K
> CPU: After all inits, caps: 0383f3ff 00000000
> 00000000 00000040
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support...
> done.
> Checking 'hlt' instruction... OK.
> CPU0: Intel Pentium III (Cascades) stepping 01
> per-CPU timeslice cutoff: 5855.10 usecs.
> task migration cache decay timeout: 6 msecs.
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000004
> ESR value after enabling vector: 00000000
> Booting processor 1/1 eip 2000
> CPU 1 irqstacks, hard=023ec000 soft=023cc000
> Initializing CPU#1
> masked ExtINT on CPU#1
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Calibrating delay loop... 1400.83 BogoMIPS
> CPU: After generic identify, caps: 0383fbff 00000000
> 00000000 00000000
> CPU: After vendor identify, caps: 0383fbff 00000000
> 00000000 00000000
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 2048K
> CPU: After all inits, caps: 0383f3ff 00000000
> 00000000 00000040
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#1.
> CPU1: Intel Pentium III (Cascades) stepping 01
> Total of 2 processors activated (2785.28 BogoMIPS).
> ENABLING IO-APIC IRQs
> Setting 2 in the phys_id_present_map
> ...changing IO-APIC physical APIC ID to 2 ... ok.
> init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11,
> 2-20, 2-21, 2-22, 2-23 not
> conn
> ected.
> ..TIMER: vector=0x31 pin1=2 pin2=0
> number of MP IRQ sources: 17.
> number of IO-APIC #2 registers: 24.
> testing the IO APIC.......................
> IO APIC #2......
> .... register #00: 02000000
> ....... : physical APIC id: 02
> ....... : Delivery Type: 0
> ....... : LTS : 0
> .... register #01: 00170011
> ....... : max redirection entries: 0017
> ....... : PRQ implemented: 0
> ....... : IO APIC version: 0011
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>
> 00 000 00 1 0 0 0 0 0 0 00
> 01 001 01 0 0 0 0 0 1 1 39
> 02 001 01 0 0 0 0 0 1 1 31
> 03 001 01 0 0 0 0 0 1 1 41
> 04 001 01 0 0 0 0 0 1 1 49
> 05 000 00 1 0 0 0 0 0 0 00
> 06 001 01 0 0 0 0 0 1 1 51
> 07 001 01 0 0 0 0 0 1 1 59
> 08 001 01 0 0 0 0 0 1 1 61
> 09 000 00 1 0 0 0 0 0 0 00
> 0a 000 00 1 0 0 0 0 0 0 00
> 0b 000 00 1 0 0 0 0 0 0 00
> 0c 001 01 0 0 0 0 0 1 1 69
> 0d 001 01 0 0 0 0 0 1 1 71
> 0e 001 01 0 0 0 0 0 1 1 79
> 0f 001 01 0 0 0 0 0 1 1 81
> 10 001 01 1 1 0 1 0 1 1 89
> 11 001 01 1 1 0 1 0 1 1 91
> 12 001 01 1 1 0 1 0 1 1 99
> 13 001 01 1 1 0 1 0 1 1 A1
> 14 000 00 1 0 0 0 0 0 0 00
> 15 000 00 1 0 0 0 0 0 0 00
> 16 000 00 1 0 0 0 0 0 0 00
> 17 000 00 1 0 0 0 0 0 0 00
> Using vector-based indexing
> IRQ to pin mappings:
> IRQ0 -> 0:2
> IRQ1 -> 0:1
> IRQ3 -> 0:3
> IRQ4 -> 0:4
> IRQ5 -> 0:18
> IRQ6 -> 0:6
> IRQ7 -> 0:7
> IRQ8 -> 0:8
> IRQ9 -> 0:19
> IRQ10 -> 0:16
> IRQ11 -> 0:17
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ15 -> 0:15
> .................................... done.
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 701.0473 MHz.
> ..... host bus clock speed is 100.0210 MHz.
> checking TSC synchronization across 2 CPUs: passed.
> Brought up 2 CPUs
> zapping low mappings.
> checking if image is initramfs...it isn't (no cpio
> magic); looks like an
> initrd
> Freeing initrd memory: 316k freed
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last
> bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040326
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> vesafb: probe of vesafb0 failed with error -6
> apm: BIOS version 1.2 Flags 0x03 (Driver version
> 1.16ac)
> apm: disabled - APM is not SMP safe.
> audit: initializing netlink socket (disabled)
> audit(1097355274.363:0): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096
> bytes)
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key 9488DB81FF525AA3
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> ksign: invalid packet (ctb=00)
> Unable to load default keyring: error=74
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected an Intel 440GX Chipset.
> agpgart: Maximum main memory to use for agp memory:
> 942M
> agpgart: AGP aperture is 64M @ 0xf8000000
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports,
> IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 16384K
> size 1024 blocksize
> divert: not allocating divert_blk for non-ethernet
> device lo
> Uniform Multi-Platform E-IDE driver Revision:
> 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx
> PIIX4: IDE controller at PCI slot 0000:00:07.1
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings:
> hda:pio, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings:
> hdc:pio, hdd:pio
> hda: NEC CD-ROM DRIVE:273, ATAPI CD/DVD-ROM drive
> Using cfq io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: cdrom_pc_intr: The drive appears confused
> (ireason = 0x01)
> hda: ATAPI 4X CD-ROM drive, 256kB Cache
> Uniform CD-ROM driver Revision: 3.20
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core
> driver
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: PS/2 Logitech Mouse on isa0060/serio1
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: AT Translated Set 2 keyboard on
> isa0060/serio0
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> NET: Registered protocol family 2
> IP: routing cache hash table of 4096 buckets,
> 64Kbytes
> TCP: Hash tables configured (established 131072 bind
> 43690)
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> CPU0: online
> domain 0: span 00000001
> groups: 00000001
> domain 1: span 00000003
> groups: 00000001 00000002
> CPU1: online
> domain 0: span 00000002
> groups: 00000002
> domain 1: span 00000003
> groups: 00000002 00000001
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem).
> SCSI subsystem initialized
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
> DRIVER, Rev 6.2.36
> <Adaptec 2940 Ultra SCSI adapter>
> aic7880: Ultra Wide Channel A, SCSI Id=7,
> 16/253 SCBs
>
> Vendor: IBM Model: DGHS18U Rev:
> 03B0
> Type: Direct-Access ANSI
> SCSI revision: 03
> scsi0:A:10:0: Tagged Queuing enabled. Depth 4
> SCSI device sda: 35843670 512-byte hdwr sectors
> (18352 MB)
> SCSI device sda: drive cache: write through
> sda: sda1
> Attached scsi disk sda at scsi0, channel 0, id 10,
> lun 0
> Vendor: IBM Model: DGHS18U Rev:
> 0350
> Type: Direct-Access ANSI
> SCSI revision: 03
> scsi0:A:11:0: Tagged Queuing enabled. Depth 4
> SCSI device sdb: 35843670 512-byte hdwr sectors
> (18352 MB)
> SCSI device sdb: drive cache: write through
> sdb: sdb1
> Attached scsi disk sdb at scsi0, channel 0, id 11,
> lun 0
> Vendor: IBM Model: DCHS09U Rev:
> 2727
> Type: Direct-Access ANSI
> SCSI revision: 02
> scsi0:A:12:0: Tagged Queuing enabled. Depth 4
> SCSI device sdc: 17774160 512-byte hdwr sectors
> (9100 MB)
> SCSI device sdc: drive cache: write back
> sdc: sdc1 sdc2
> Attached scsi disk sdc at scsi0, channel 0, id 12,
> lun 0
> (scsi0:A:13): 40.000MB/s transfers (20.000MHz,
> offset 8, 16bit)
> Vendor: IBM Model: DCHS09U Rev:
> 2727
> Type: Direct-Access ANSI
> SCSI revision: 02
> scsi0:A:13:0: Tagged Queuing enabled. Depth 4
> SCSI device sdd: 17774160 512-byte hdwr sectors
> (9100 MB)
> SCSI device sdd: drive cache: write back
> sdd: sdd1
> Attached scsi disk sdd at scsi0, channel 0, id 13,
> lun 0
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Freeing unused kernel memory: 176k freed
> SELinux: Disabled at runtime.
> SELinux: Unregistering netfilter hooks
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device 02343560(lo)
> IPv6 over IPv4 tunneling driver
> divert: not allocating divert_blk for non-ethernet
> device sit0
> USB Universal Host Controller Interface driver v2.2
> uhci_hcd 0000:00:07.2: UHCI Host Controller
> uhci_hcd 0000:00:07.2: irq 9, io base 0000ef80
> uhci_hcd 0000:00:07.2: new USB bus registered,
> assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> EXT3 FS on sdc1, internal journal
> device-mapper: 4.1.0-ioctl (2003-12-10) initialised:
> dm at uk.sistina.com
> cdrom: open failed.
> Adding 2047992k swap on /dev/sdc2. Priority:-1
> extents:1
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> IA-32 Microcode Update Driver: v1.14
> <tigran at veritas.com>
> microcode: CPU1 updated from revision 0x0 to 0x1,
> date = 03062000
> microcode: CPU0 updated from revision 0x0 to 0x1,
> date = 03062000
> parport0: PC-style at 0x378 [PCSPP,TRISTATE]
> Attached scsi generic sg0 at scsi0, channel 0, id
> 10, lun 0, type 0
> Attached scsi generic sg1 at scsi0, channel 0, id
> 11, lun 0, type 0
> Attached scsi generic sg2 at scsi0, channel 0, id
> 12, lun 0, type 0
> Attached scsi generic sg3 at scsi0, channel 0, id
> 13, lun 0, type 0
> kudzu: Using deprecated /dev/sg mechanism instead of
> SG_IO on the actual
> device
> kudzu: Using deprecated /dev/sg mechanism instead of
> SG_IO on the actual
> device
> kudzu: Using deprecated /dev/sg mechanism instead of
> SG_IO on the actual
> device
> kudzu: Using deprecated /dev/sg mechanism instead of
> SG_IO on the actual
> device
> inserting floppy driver for 2.6.8-1.521smp
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> e100: Intel(R) PRO/100 Network Driver, 3.0.18
> e100: Copyright(c) 1999-2004 Intel Corporation
> divert: allocating divert_blk for eth0
> e100: eth0: e100_probe: addr 0xfc1ff000, irq 11, MAC
> addr 00:A0:C9:99:9C:06
> divert: allocating divert_blk for eth1
> e100: eth1: e100_probe: addr 0xfc1fe000, irq 5, MAC
> addr 00:A0:C9:B8:01:69
> divert: freeing divert_blk for eth0
> divert: freeing divert_blk for eth1
> ip_tables: (C) 2000-2002 Netfilter core team
> ip_conntrack version 2.1 (8192 buckets, 65536 max) -
> 304 bytes per conntrack
> e100: Intel(R) PRO/100 Network Driver, 3.0.18
> e100: Copyright(c) 1999-2004 Intel Corporation
> divert: allocating divert_blk for eth0
> e100: eth0: e100_probe: addr 0xfc1ff000, irq 11, MAC
> addr 00:A0:C9:99:9C:06
> divert: allocating divert_blk for eth1
> e100: eth1: e100_probe: addr 0xfc1fe000, irq 5, MAC
> addr 00:A0:C9:B8:01:69
> e100: eth0: e100_watchdog: link up, 100Mbps,
> full-duplex
> e100: eth1: e100_watchdog: link up, 100Mbps,
> full-duplex
> process `syslogd' is using obsolete setsockopt
> SO_BSDCOMPAT
> eth0: no IPv6 routers present
> eth1: no IPv6 routers present
> parport0: PC-style at 0x378 [PCSPP,TRISTATE]
> lp0: using parport0 (polling).
> lp0: console ready
> Installing knfsd (copyright (C) 1996
> okir at monad.swb.de).
> nfsd: last server has exited
> nfsd: unexporting all filesystems
> rpciod: active tasks at shutdown?!
> RPC: failed to contact portmap (errno -5).
> (END)
>
>
> ***chkconfig --list***
> [root at server mnt]# chkconfig --list
> smb 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> dc_client 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> smartd 0:off 1:off 2:on 3:on 4:on
> 5:off 6:off
> bcm5820 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> autofs 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> kudzu 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> sshd 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> gpm 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> nfs 0:off 1:off 2:on 3:on 4:on
> 5:off 6:off
> squidguard 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> cups 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> tux 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> snmpd 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> httpd 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> microcode_ctl 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> psacct 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> snmptrapd 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> ntpd 0:off 1:off 2:off 3:on
> 4:off 5:on 6:off
> rpcidmapd 0:on 1:off 2:off 3:on
> 4:off 5:off 6:on
> readahead_early 0:off 1:off 2:off 3:off
> 4:off 5:on 6:off
> apmd 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> yum 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> nfslock 0:off 1:off 2:on 3:on 4:on
> 5:off 6:off
> irda 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> rpcgssd 0:on 1:off 2:off 3:on
> 4:off 5:on 6:on
> xinetd 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> portmap 0:off 1:off 2:on 3:on 4:on
> 5:off 6:off
> acpid 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> mdmpd 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> isdn 0:off 1:off 2:on 3:on 4:on
> 5:off 6:off
> transparent-proxying 0:off 1:off 2:off
> 3:off 4:off 5:off
> 6:off
> aep1000 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> pcmcia 0:off 1:off 2:on 3:on 4:on
> 5:off 6:off
> xfs 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> readahead 0:off 1:off 2:off 3:off
> 4:off 5:on 6:off
> dc_server 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> squid 0:off 1:off 2:off 3:off
> 4:off 5:on 6:off
> rhnsd 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> nat 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> random 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> dhcpd 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> dhcrelay 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> network 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> mdmonitor 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> anacron 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> named 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> sendmail 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> crond 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> netdump 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> netfs 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> verynice.init 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> vncserver 0:off 1:off 2:off 3:off
> 4:off 5:on 6:off
> atd 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> saslauthd 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> rpcsvcgssd 0:on 1:off 2:off 3:on
> 4:off 5:off 6:on
> rawdevices 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> syslog 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> iptables 0:off 1:off 2:on 3:on 4:on
> 5:on 6:off
> irqbalance 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> cpuspeed 0:off 1:on 2:on 3:on 4:on
> 5:on 6:off
> netplugd 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> lisa 0:off 1:off 2:off 3:off
> 4:off 5:off 6:off
> messagebus 0:off 1:off 2:off 3:on 4:on
> 5:on 6:off
> xinetd based services:
> time-udp: off
> daytime-udp: off
> services: off
> chargen: off
> chargen-udp: off
> echo-udp: off
> cups-lpd: off
> tftp: on
> rsync: off
> sgi_fam: off
> time: off
> vnc: on
> daytime: off
> ktalk: off
> echo: off
>
> Thanks!
>
> Wilson
>
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>
More information about the K12OSN
mailing list