[K12OSN] Loading vmlinuz.ltsp

Jim McQuillan jam at mcquil.com
Wed Sep 1 12:35:30 UTC 2004

You have 2 nics, both set to DHCP ?

Are both nics plugged into the same switch, getting their addresses
from the same DHCP server ?

if so, then it isn't gonna work.

with k12ltsp, you really need to set eth0 with a static IP address,
typically  AND, it must be on a separate switch.
Or at least on a separate VLAN.  putting both nics on the same
physical network isn't gonna work.

Jim McQuillan
jam at Ltsp.org

On Wed, Sep 01, 2004 at 06:12:13AM +1000, ben may wrote:
> Hi eveybody,
> I have just put /once again/ a fresh copy of k12lstsp on my server v 4.0.1.
> It has two network cards, a onboard and a add-on card (expansion slot) i
> have set both cards to DHCP, i dont plan of going onto the net, these will
> be indapendent to all my other networks. i turned the fire wall OFF for the
> same reason, that i wont be on the net.
> Now after making a boot disk from rom o matic heres where my client gets to,
> Scanning for server (DHCP).....
> me= server= gateway=
> loading
> Thats all it does,
> if anyone has some help PLEASE help me,
> Thanks
> Ben May
> QLD, Australia
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>

More information about the K12OSN mailing list