[K12OSN] NIC swap in LTSP

[Josiah Ritchie]

Have you tried physically swapping the two in the slots or is one
on-board?

On Thu, 2004-09-09 at 09:33, Jim Kronebusch wrote:
> I posted this problem before but let me re-outline it for everyone.  I
> have a new Dell with a Gigabit NIC onboard and a 10/100 NIC PCI card.
> Problem is when 4.1.0 loads it detects my NIC's in an undesirable order
> defaulting my Gigabit NIC for internet and the 10/100 for the LTSP
> network.  I need this of course in opposite order.  Les recommended me
> to swap aliases in /etc/modules.conf and reboot and all should be well.
> But the only modules.conf I can find is under opt/ltsp/etc/yadda/yadda.
> So what would the next suggestion be?  I tried to just reassign the Gig
> NIC with the proper static 192.168.0.254 and the 10/100 with DHCP on
> load, but that just makes things stupid.  The K12LTSP must defaultly
> configure based on interface names such as eth0 and eth1 on load which I
> am unable to change until after the fact.  
> 
> Any other suggestions would be appreciated, as of right now my Gig
> switch and NIC are fairly useless.
> 
> Jim Kronebusch
> Cotter Tech Department
> 507-453-5188
> jim at winonacotter.org 
> 
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.744 / Virus Database: 496 - Release Date: 8/24/2004
>  
-- 
Josiah Ritchie
Network Administrator
Washington Bible College
Capital Bible Seminary