[K12OSN] NIC swap in LTSP

[Sudev Barar]

On Thu, 2004-09-09 at 19:03, Jim Kronebusch wrote:
> I posted this problem before but let me re-outline it for everyone.  I
> have a new Dell with a Gigabit NIC onboard and a 10/100 NIC PCI card.
> Problem is when 4.1.0 loads it detects my NIC's in an undesirable order
> defaulting my Gigabit NIC for internet and the 10/100 for the LTSP
> network.  I need this of course in opposite order.  Les recommended me
> to swap aliases in /etc/modules.conf and reboot and all should be well.
> But the only modules.conf I can find is under opt/ltsp/etc/yadda/yadda.
> So what would the next suggestion be?  I tried to just reassign the Gig
> NIC with the proper static 192.168.0.254 and the 10/100 with DHCP on
> load, but that just makes things stupid.  The K12LTSP must defaultly
> configure based on interface names such as eth0 and eth1 on load which I
> am unable to change until after the fact.  
> 
> Any other suggestions would be appreciated, as of right now my Gig
> switch and NIC are fairly useless.
Try running command neat
Both interfaces should show up. Note down all details in edit and then
stop both interface and do the edits. Also use the probe and fix MAC
address. Save and restart the interfaces.
I think this should do what you want.
HTH
-- 
Sudev Barar
Learning Linux