[K12OSN] dumped into maintenance shell

[Mark Gumprecht]

What every semi-newbie fears.... My k12ltsp was disallowing smb share 
access and home directories. I rebooted and it dumped me into a 
maintenance shell. I tried to fsck, but said the superblock was bad. I 
shut it down and took it to the office. It booted right up. YIPPEE. But 
how ever the logs showed this:

Mar 31 08:33:30 server kernel: scsi0:0:1:0: Attempting to abort cmd 66537e00: 0x28 0x0 0x3 0x4e 0x4b 0xa7 0x0 0x0 0x18 0x0
Mar 31 08:33:30 server kernel: scsi0: At time of recovery, card was not paused
Mar 31 08:33:30 server kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Mar 31 08:33:30 server kernel: scsi0: Dumping Card State at program address 0x1 Mode 0x33
Mar 31 08:33:30 server kernel: Card was paused
Mar 31 08:33:30 server kernel: HS_MAILBOX[0x0] INTCTL[0xc0] SEQINTSTAT[0x10] SAVED_MODE[0x11] 
Mar 31 08:33:30 server kernel: DFFSTAT[0x31] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] 
Mar 31 08:33:30 server kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] 
Mar 31 08:33:30 server kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] 
Mar 31 08:33:30 server kernel: SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x8] 
Mar 31 08:33:30 server kernel: SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] 
Mar 31 08:33:30 server kernel: LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x1] 

This is just a short snip of a long message. What I got out of this is 
my /dev/sdb tripped off-line and paused. My only partition on that drive 
is my /home. /dev/sda worked fine. Has anyone had this happen before? 
Should it be replaced, or am I just paranoid? I have a backup so that's 
non issue, just the thought of having to do it. The unit is a DAKTECH 5 
mos. old, 2-seagate ultra 320 cheetah 36gig scsi drives on a intel 
SE7501HG2 motherboard. The unit has been up and running fine for 5 hours 
now. Thoughts?
Thanks.
Mark

-- 
Mark Gumprecht
Data Systems Specialist
MSAD3
Unity, ME
gumprechtm at msln.net