[K12OSN] First Installation
jim at winonacotter.org
Tue Feb 8 15:01:20 UTC 2005
> > > and here is:
> > > # more /etc/exports
> > > /opt/ltsp/i386
> > > 192.168.2.0/255.255.255.0(ro,no_root_squash,sync)
> > > /var/opt/ltsp/swapfiles
> > > 192.168.2.0/255.255.255.0(rw,no_root_squash,async)
> > Is this a single NIC install? I think the standard
> > export would be:
> > /opt/ltsp/i386
> > 192.168.0.0/255.255.255.0(ro,no_root_squash,sync)
> > /var/opt/ltsp/swapfiles
> > 192.168.0.0/255.255.255.0(rw,no_root_squash,async)
> > Did you change the IP of the internal NIC during the
> > install?
> Hi Jim,
> I don't change anything,
> just do default setup configuration.
> Yes I'm using single NIC.
> I have no problem to
> mounting(/opt/ltsp/i386,/var/opt/ltsp/swapfiles) from
> another distro to LTSP server(Just to check the share
> is working)
This is very odd if you didn't change anything. If your internal NIC
had the default of 192.168.0.254 assigned to it I don't get how a
192.168.2.x network could have gotten assigned in /etc/exports. Is your
/etc/dhcpd.conf file also setup with the 192.168.2.x networks? If so do
I am not sure what the IP scheme is for the network you are plugging
your single NIC setup into but lets assume it is
Check to be sure your eth0 (or whatever NIC is setup on your LAN with
the clients) is set to 192.168.0.254 and a subnet mask of 255.255.255.0.
Next you'll have to look through these files and replace all references
to 192.168.2.x with 192.168.0.x.
But at that point, you may want to just start over and make sure you
take the default of 192.168.0.254 for eth0 (I know, but just to be
I hope this helps. If not you may want to post the configs from the
list above for review. I am sure we could pick out the error. Also
include the IP of of your NIC and the IP scheme for your network.
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
More information about the K12OSN